| /* |
| * Copyright (c) 2015 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * ip/ip_lookup.c: ip4/6 adjacency and lookup table management |
| * |
| * Copyright (c) 2008 Eliot Dresselhaus |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE |
| * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <vnet/ip/ip.h> |
| #include <vnet/adj/adj.h> |
| #include <vnet/fib/fib_table.h> |
| #include <vnet/fib/ip4_fib.h> |
| #include <vnet/fib/ip6_fib.h> |
| #include <vnet/mpls/mpls.h> |
| #include <vnet/mfib/mfib_table.h> |
| #include <vnet/dpo/drop_dpo.h> |
| #include <vnet/dpo/classify_dpo.h> |
| #include <vnet/dpo/punt_dpo.h> |
| #include <vnet/dpo/receive_dpo.h> |
| #include <vnet/dpo/ip_null_dpo.h> |
| #include <vnet/dpo/l3_proxy_dpo.h> |
| |
| /** |
| * @file |
| * @brief IPv4 and IPv6 adjacency and lookup table management. |
| * |
| */ |
| |
| static clib_error_t * |
| ip_sw_interface_add_del (vnet_main_t * vnm, u32 sw_if_index, u32 is_add) |
| { |
| vec_validate_init_empty (ip4_main. |
| lookup_main.if_address_pool_index_by_sw_if_index, |
| sw_if_index, ~0); |
| vec_validate_init_empty (ip6_main. |
| lookup_main.if_address_pool_index_by_sw_if_index, |
| sw_if_index, ~0); |
| |
| return (NULL); |
| } |
| |
| VNET_SW_INTERFACE_ADD_DEL_FUNCTION (ip_sw_interface_add_del); |
| |
| void |
| ip_lookup_init (ip_lookup_main_t * lm, u32 is_ip6) |
| { |
| if (!lm->fib_result_n_bytes) |
| lm->fib_result_n_bytes = sizeof (uword); |
| |
| lm->is_ip6 = is_ip6; |
| mhash_init (&lm->prefix_to_if_prefix_index, sizeof (uword), |
| sizeof (ip_interface_prefix_key_t)); |
| if (is_ip6) |
| { |
| lm->format_address_and_length = format_ip6_address_and_length; |
| mhash_init (&lm->address_to_if_address_index, sizeof (uword), |
| sizeof (ip6_address_fib_t)); |
| } |
| else |
| { |
| lm->format_address_and_length = format_ip4_address_and_length; |
| mhash_init (&lm->address_to_if_address_index, sizeof (uword), |
| sizeof (ip4_address_fib_t)); |
| } |
| |
| { |
| int i; |
| |
| /* Setup all IP protocols to be punted and builtin-unknown. */ |
| for (i = 0; i < 256; i++) |
| { |
| lm->local_next_by_ip_protocol[i] = IP_LOCAL_NEXT_PUNT; |
| lm->builtin_protocol_by_ip_protocol[i] = IP_BUILTIN_PROTOCOL_UNKNOWN; |
| } |
| |
| lm->local_next_by_ip_protocol[IP_PROTOCOL_UDP] = IP_LOCAL_NEXT_UDP_LOOKUP; |
| lm->local_next_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 : |
| IP_PROTOCOL_ICMP] = IP_LOCAL_NEXT_ICMP; |
| lm->builtin_protocol_by_ip_protocol[IP_PROTOCOL_UDP] = |
| IP_BUILTIN_PROTOCOL_UDP; |
| lm->builtin_protocol_by_ip_protocol[is_ip6 ? IP_PROTOCOL_ICMP6 : |
| IP_PROTOCOL_ICMP] = |
| IP_BUILTIN_PROTOCOL_ICMP; |
| } |
| } |
| |
| u8 * |
| format_ip_flow_hash_config (u8 * s, va_list * args) |
| { |
| flow_hash_config_t flow_hash_config = va_arg (*args, u32); |
| |
| #define _(n,v) if (flow_hash_config & v) s = format (s, "%s ", #n); |
| foreach_flow_hash_bit; |
| #undef _ |
| |
| return s; |
| } |
| |
| u8 * |
| format_ip_adjacency_packet_data (u8 * s, va_list * args) |
| { |
| u8 *packet_data = va_arg (*args, u8 *); |
| u32 n_packet_data_bytes = va_arg (*args, u32); |
| |
| s = format (s, "%U", format_hex_bytes, packet_data, n_packet_data_bytes); |
| |
| return s; |
| } |
| |
| static uword |
| unformat_dpo (unformat_input_t * input, va_list * args) |
| { |
| dpo_id_t *dpo = va_arg (*args, dpo_id_t *); |
| fib_protocol_t fp = va_arg (*args, int); |
| dpo_proto_t proto; |
| |
| proto = fib_proto_to_dpo (fp); |
| |
| if (unformat (input, "drop")) |
| dpo_copy (dpo, drop_dpo_get (proto)); |
| else if (unformat (input, "punt")) |
| dpo_copy (dpo, punt_dpo_get (proto)); |
| else if (unformat (input, "local")) |
| receive_dpo_add_or_lock (proto, ~0, NULL, dpo); |
| else if (unformat (input, "null-send-unreach")) |
| ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_UNREACH, dpo); |
| else if (unformat (input, "null-send-prohibit")) |
| ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_SEND_ICMP_PROHIBIT, dpo); |
| else if (unformat (input, "null")) |
| ip_null_dpo_add_and_lock (proto, IP_NULL_ACTION_NONE, dpo); |
| else if (unformat (input, "classify")) |
| { |
| u32 classify_table_index; |
| |
| if (!unformat (input, "%d", &classify_table_index)) |
| { |
| clib_warning ("classify adj must specify table index"); |
| return 0; |
| } |
| |
| dpo_set (dpo, DPO_CLASSIFY, proto, |
| classify_dpo_create (proto, classify_table_index)); |
| } |
| else |
| return 0; |
| |
| return 1; |
| } |
| |
| const ip46_address_t zero_addr = { |
| .as_u64 = { |
| 0, 0}, |
| }; |
| |
| static clib_error_t * |
| vnet_ip_route_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| u32 table_id, is_del, fib_index, payload_proto; |
| dpo_id_t dpo = DPO_INVALID, *dpos = NULL; |
| fib_route_path_t *rpaths = NULL, rpath; |
| fib_prefix_t *prefixs = NULL, pfx; |
| clib_error_t *error = NULL; |
| f64 count; |
| int i; |
| |
| is_del = 0; |
| table_id = 0; |
| count = 1; |
| clib_memset (&pfx, 0, sizeof (pfx)); |
| |
| /* Get a line of input. */ |
| if (!unformat_user (main_input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| clib_memset (&rpath, 0, sizeof (rpath)); |
| |
| if (unformat (line_input, "table %d", &table_id)) |
| ; |
| else if (unformat (line_input, "count %f", &count)) |
| ; |
| |
| else if (unformat (line_input, "%U/%d", |
| unformat_ip4_address, &pfx.fp_addr.ip4, &pfx.fp_len)) |
| { |
| payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP4; |
| vec_add1 (prefixs, pfx); |
| } |
| else if (unformat (line_input, "%U/%d", |
| unformat_ip6_address, &pfx.fp_addr.ip6, &pfx.fp_len)) |
| { |
| payload_proto = pfx.fp_proto = FIB_PROTOCOL_IP6; |
| vec_add1 (prefixs, pfx); |
| } |
| else if (unformat (line_input, "via %U", |
| unformat_fib_route_path, &rpath, &payload_proto)) |
| { |
| vec_add1 (rpaths, rpath); |
| } |
| else if (vec_len (prefixs) > 0 && |
| unformat (line_input, "via %U", |
| unformat_dpo, &dpo, prefixs[0].fp_proto)) |
| { |
| vec_add1 (dpos, dpo); |
| } |
| else if (unformat (line_input, "del")) |
| is_del = 1; |
| else if (unformat (line_input, "add")) |
| is_del = 0; |
| else |
| { |
| error = unformat_parse_error (line_input); |
| goto done; |
| } |
| } |
| |
| if (vec_len (prefixs) == 0) |
| { |
| error = |
| clib_error_return (0, "expected ip4/ip6 destination address/length."); |
| goto done; |
| } |
| |
| if (!is_del && vec_len (rpaths) + vec_len (dpos) == 0) |
| { |
| error = clib_error_return (0, "expected paths."); |
| goto done; |
| } |
| |
| if (~0 == table_id) |
| { |
| /* |
| * if no table_id is passed we will manipulate the default |
| */ |
| fib_index = 0; |
| } |
| else |
| { |
| fib_index = fib_table_find (prefixs[0].fp_proto, table_id); |
| |
| if (~0 == fib_index) |
| { |
| error = clib_error_return (0, "Nonexistent table id %d", table_id); |
| goto done; |
| } |
| } |
| |
| for (i = 0; i < vec_len (prefixs); i++) |
| { |
| if (is_del && 0 == vec_len (rpaths)) |
| { |
| fib_table_entry_delete (fib_index, &prefixs[i], FIB_SOURCE_CLI); |
| } |
| else if (!is_del && 1 == vec_len (dpos)) |
| { |
| fib_table_entry_special_dpo_add (fib_index, |
| &prefixs[i], |
| FIB_SOURCE_CLI, |
| FIB_ENTRY_FLAG_EXCLUSIVE, |
| &dpos[0]); |
| dpo_reset (&dpos[0]); |
| } |
| else if (vec_len (dpos) > 0) |
| { |
| error = |
| clib_error_return (0, |
| "Load-balancing over multiple special adjacencies is unsupported"); |
| goto done; |
| } |
| else if (0 < vec_len (rpaths)) |
| { |
| u32 k, n, incr; |
| ip46_address_t dst = prefixs[i].fp_addr; |
| f64 t[2]; |
| n = count; |
| t[0] = vlib_time_now (vm); |
| incr = 1 << ((FIB_PROTOCOL_IP4 == prefixs[0].fp_proto ? 32 : 128) - |
| prefixs[i].fp_len); |
| |
| for (k = 0; k < n; k++) |
| { |
| fib_prefix_t rpfx = { |
| .fp_len = prefixs[i].fp_len, |
| .fp_proto = prefixs[i].fp_proto, |
| .fp_addr = dst, |
| }; |
| |
| if (is_del) |
| fib_table_entry_path_remove2 (fib_index, |
| &rpfx, FIB_SOURCE_CLI, rpaths); |
| else |
| fib_table_entry_path_add2 (fib_index, |
| &rpfx, |
| FIB_SOURCE_CLI, |
| FIB_ENTRY_FLAG_NONE, rpaths); |
| |
| if (FIB_PROTOCOL_IP4 == prefixs[0].fp_proto) |
| { |
| dst.ip4.as_u32 = |
| clib_host_to_net_u32 (incr + |
| clib_net_to_host_u32 (dst. |
| ip4.as_u32)); |
| } |
| else |
| { |
| int bucket = (incr < 64 ? 0 : 1); |
| dst.ip6.as_u64[bucket] = |
| clib_host_to_net_u64 (incr + |
| clib_net_to_host_u64 (dst.ip6.as_u64 |
| [bucket])); |
| } |
| } |
| |
| t[1] = vlib_time_now (vm); |
| if (count > 1) |
| vlib_cli_output (vm, "%.6e routes/sec", count / (t[1] - t[0])); |
| } |
| else |
| { |
| error = clib_error_return (0, "Don't understand what you want..."); |
| goto done; |
| } |
| } |
| |
| done: |
| vec_free (dpos); |
| vec_free (prefixs); |
| vec_free (rpaths); |
| unformat_free (line_input); |
| return error; |
| } |
| |
| clib_error_t * |
| vnet_ip_table_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, |
| vlib_cli_command_t * cmd, fib_protocol_t fproto) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| clib_error_t *error = NULL; |
| u32 table_id, is_add; |
| u8 *name = NULL; |
| |
| is_add = 1; |
| table_id = ~0; |
| |
| /* Get a line of input. */ |
| if (!unformat_user (main_input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "%d", &table_id)) |
| ; |
| else if (unformat (line_input, "del")) |
| is_add = 0; |
| else if (unformat (line_input, "add")) |
| is_add = 1; |
| else if (unformat (line_input, "name %s", &name)) |
| ; |
| else |
| { |
| error = unformat_parse_error (line_input); |
| goto done; |
| } |
| } |
| |
| if (~0 == table_id) |
| { |
| error = clib_error_return (0, "No table id"); |
| goto done; |
| } |
| else if (0 == table_id) |
| { |
| error = clib_error_return (0, "Can't change the default table"); |
| goto done; |
| } |
| else |
| { |
| if (is_add) |
| { |
| ip_table_create (fproto, table_id, 0, name); |
| } |
| else |
| { |
| ip_table_delete (fproto, table_id, 0); |
| } |
| } |
| |
| done: |
| unformat_free (line_input); |
| return error; |
| } |
| |
| clib_error_t * |
| vnet_ip4_table_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, vlib_cli_command_t * cmd) |
| { |
| return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP4)); |
| } |
| |
| clib_error_t * |
| vnet_ip6_table_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, vlib_cli_command_t * cmd) |
| { |
| return (vnet_ip_table_cmd (vm, main_input, cmd, FIB_PROTOCOL_IP6)); |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (vlib_cli_ip_command, static) = { |
| .path = "ip", |
| .short_help = "Internet protocol (IP) commands", |
| }; |
| /* *INDENT-ON* */ |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (vlib_cli_ip6_command, static) = { |
| .path = "ip6", |
| .short_help = "Internet protocol version 6 (IPv6) commands", |
| }; |
| /* *INDENT-ON* */ |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (vlib_cli_show_ip_command, static) = { |
| .path = "show ip", |
| .short_help = "Internet protocol (IP) show commands", |
| }; |
| /* *INDENT-ON* */ |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (vlib_cli_show_ip6_command, static) = { |
| .path = "show ip6", |
| .short_help = "Internet protocol version 6 (IPv6) show commands", |
| }; |
| /* *INDENT-ON* */ |
| |
| /*? |
| * This command is used to add or delete IPv4 or IPv6 routes. All |
| * IP Addresses ('<em><dst-ip-addr>/<width></em>', |
| * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>') |
| * can be IPv4 or IPv6, but all must be of the same form in a single |
| * command. To display the current set of routes, use the commands |
| * '<em>show ip fib</em>' and '<em>show ip6 fib</em>'. |
| * |
| * @cliexpar |
| * Example of how to add a straight forward static route: |
| * @cliexcmd{ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0} |
| * Example of how to delete a straight forward static route: |
| * @cliexcmd{ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0} |
| * Mainly for route add/del performance testing, one can add or delete |
| * multiple routes by adding 'count N' to the previous item: |
| * @cliexcmd{ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0} |
| * Add multiple routes for the same destination to create equal-cost multipath: |
| * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0} |
| * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0} |
| * For unequal-cost multipath, specify the desired weights. This |
| * combination of weights results in 3/4 of the traffic following the |
| * second path, 1/4 following the first path: |
| * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1} |
| * @cliexcmd{ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3} |
| * To add a route to a particular FIB table (VRF), use: |
| * @cliexcmd{ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0} |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (ip_route_command, static) = { |
| .path = "ip route", |
| .short_help = "ip route [add|del] [count <n>] <dst-ip-addr>/<width> [table <table-id>] via [next-hop-address] [next-hop-interface] [next-hop-table <value>] [weight <value>] [preference <value>] [udp-encap-id <value>] [ip4-lookup-in-table <value>] [ip6-lookup-in-table <value>] [mpls-lookup-in-table <value>] [resolve-via-host] [resolve-via-connected] [rx-ip4 <interface>] [out-labels <value value value>]", |
| .function = vnet_ip_route_cmd, |
| .is_mp_safe = 1, |
| }; |
| |
| /* *INDENT-ON* */ |
| /*? |
| * This command is used to add or delete IPv4 Tables. All |
| * Tables must be explicitly added before that can be used. Creating a |
| * table will add both unicast and multicast FIBs |
| * |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (ip4_table_command, static) = { |
| .path = "ip table", |
| .short_help = "ip table [add|del] <table-id>", |
| .function = vnet_ip4_table_cmd, |
| }; |
| /* *INDENT-ON* */ |
| |
| /* *INDENT-ON* */ |
| /*? |
| * This command is used to add or delete IPv4 Tables. All |
| * Tables must be explicitly added before that can be used. Creating a |
| * table will add both unicast and multicast FIBs |
| * |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (ip6_table_command, static) = { |
| .path = "ip6 table", |
| .short_help = "ip6 table [add|del] <table-id>", |
| .function = vnet_ip6_table_cmd, |
| }; |
| |
| static clib_error_t * |
| ip_table_bind_cmd (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd, |
| fib_protocol_t fproto) |
| { |
| vnet_main_t *vnm = vnet_get_main (); |
| clib_error_t *error = 0; |
| u32 sw_if_index, table_id; |
| int rv; |
| |
| sw_if_index = ~0; |
| |
| if (!unformat_user (input, unformat_vnet_sw_interface, vnm, &sw_if_index)) |
| { |
| error = clib_error_return (0, "unknown interface `%U'", |
| format_unformat_error, input); |
| goto done; |
| } |
| |
| if (unformat (input, "%d", &table_id)) |
| ; |
| else |
| { |
| error = clib_error_return (0, "expected table id `%U'", |
| format_unformat_error, input); |
| goto done; |
| } |
| |
| rv = ip_table_bind (fproto, sw_if_index, table_id, 0); |
| |
| if (VNET_API_ERROR_ADDRESS_FOUND_FOR_INTERFACE == rv) |
| { |
| error = clib_error_return (0, "IP addresses are still present on %U", |
| format_vnet_sw_if_index_name, |
| vnet_get_main(), |
| sw_if_index); |
| } |
| else if (VNET_API_ERROR_NO_SUCH_FIB == rv) |
| { |
| error = clib_error_return (0, "no such table %d", table_id); |
| } |
| else if (0 != rv) |
| { |
| error = clib_error_return (0, "unknown error"); |
| } |
| |
| done: |
| return error; |
| } |
| |
| static clib_error_t * |
| ip4_table_bind_cmd (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP4)); |
| } |
| |
| static clib_error_t * |
| ip6_table_bind_cmd (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| return (ip_table_bind_cmd (vm , input, cmd, FIB_PROTOCOL_IP6)); |
| } |
| |
| /*? |
| * Place the indicated interface into the supplied IPv4 FIB table (also known |
| * as a VRF). The FIB table must be created using "ip table add" already. To |
| * display the current IPv4 FIB table, use the command '<em>show ip fib</em>'. |
| * FIB table will only be displayed if a route has been added to the table, or |
| * an IP Address is assigned to an interface in the table (which adds a route |
| * automatically). |
| * |
| * @note IP addresses added after setting the interface IP table are added to |
| * the indicated FIB table. If an IP address is added prior to changing the |
| * table then this is an error. The control plane must remove these addresses |
| * first and then change the table. VPP will not automatically move the |
| * addresses from the old to the new table as it does not know the validity |
| * of such a change. |
| * |
| * @cliexpar |
| * Example of how to add an interface to an IPv4 FIB table (where 2 is the table-id): |
| * @cliexcmd{set interface ip table GigabitEthernet2/0/0 2} |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (set_interface_ip_table_command, static) = |
| { |
| .path = "set interface ip table", |
| .function = ip4_table_bind_cmd, |
| .short_help = "set interface ip table <interface> <table-id>", |
| }; |
| /* *INDENT-ON* */ |
| |
| /*? |
| * Place the indicated interface into the supplied IPv6 FIB table (also known |
| * as a VRF). The FIB table must be created using "ip6 table add" already. To |
| * display the current IPv6 FIB table, use the command '<em>show ip6 fib</em>'. |
| * FIB table will only be displayed if a route has been added to the table, or |
| * an IP Address is assigned to an interface in the table (which adds a route |
| * automatically). |
| * |
| * @note IP addresses added after setting the interface IP table are added to |
| * the indicated FIB table. If an IP address is added prior to changing the |
| * table then this is an error. The control plane must remove these addresses |
| * first and then change the table. VPP will not automatically move the |
| * addresses from the old to the new table as it does not know the validity |
| * of such a change. |
| * |
| * @cliexpar |
| * Example of how to add an interface to an IPv6 FIB table (where 2 is the table-id): |
| * @cliexcmd{set interface ip6 table GigabitEthernet2/0/0 2} |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (set_interface_ip6_table_command, static) = |
| { |
| .path = "set interface ip6 table", |
| .function = ip6_table_bind_cmd, |
| .short_help = "set interface ip6 table <interface> <table-id>" |
| }; |
| /* *INDENT-ON* */ |
| |
| clib_error_t * |
| vnet_ip_mroute_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| fib_route_path_t rpath, *rpaths = NULL; |
| clib_error_t *error = NULL; |
| u32 table_id, is_del, payload_proto; |
| mfib_prefix_t pfx; |
| u32 fib_index; |
| mfib_entry_flags_t eflags = 0; |
| u32 gcount, scount, ss, gg, incr; |
| f64 timet[2]; |
| u32 rpf_id = MFIB_RPF_ID_NONE; |
| |
| gcount = scount = 1; |
| is_del = 0; |
| table_id = 0; |
| clib_memset (&pfx, 0, sizeof (pfx)); |
| clib_memset (&rpath, 0, sizeof (rpath)); |
| rpath.frp_sw_if_index = ~0; |
| |
| /* Get a line of input. */ |
| if (!unformat_user (main_input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "table %d", &table_id)) |
| ; |
| else if (unformat (line_input, "del")) |
| is_del = 1; |
| else if (unformat (line_input, "add")) |
| is_del = 0; |
| else if (unformat (line_input, "rpf-id %d", &rpf_id)) |
| ; |
| else if (unformat (line_input, "scount %d", &scount)) |
| ; |
| else if (unformat (line_input, "gcount %d", &gcount)) |
| ; |
| else if (unformat (line_input, "%U %U", |
| unformat_ip4_address, |
| &pfx.fp_src_addr.ip4, |
| unformat_ip4_address, &pfx.fp_grp_addr.ip4)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP4; |
| pfx.fp_len = 64; |
| } |
| else if (unformat (line_input, "%U %U", |
| unformat_ip6_address, |
| &pfx.fp_src_addr.ip6, |
| unformat_ip6_address, &pfx.fp_grp_addr.ip6)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP6; |
| pfx.fp_len = 256; |
| } |
| else if (unformat (line_input, "%U/%d", |
| unformat_ip4_address, |
| &pfx.fp_grp_addr.ip4, &pfx.fp_len)) |
| { |
| clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4)); |
| pfx.fp_proto = FIB_PROTOCOL_IP4; |
| } |
| else if (unformat (line_input, "%U/%d", |
| unformat_ip6_address, |
| &pfx.fp_grp_addr.ip6, &pfx.fp_len)) |
| { |
| clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6)); |
| pfx.fp_proto = FIB_PROTOCOL_IP6; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_ip4_address, &pfx.fp_grp_addr.ip4)) |
| { |
| clib_memset (&pfx.fp_src_addr.ip4, 0, sizeof (pfx.fp_src_addr.ip4)); |
| pfx.fp_proto = FIB_PROTOCOL_IP4; |
| pfx.fp_len = 32; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_ip6_address, &pfx.fp_grp_addr.ip6)) |
| { |
| clib_memset (&pfx.fp_src_addr.ip6, 0, sizeof (pfx.fp_src_addr.ip6)); |
| pfx.fp_proto = FIB_PROTOCOL_IP6; |
| pfx.fp_len = 128; |
| } |
| else if (unformat (line_input, "via local Forward")) |
| { |
| clib_memset (&rpath.frp_addr, 0, sizeof (rpath.frp_addr)); |
| rpath.frp_sw_if_index = ~0; |
| rpath.frp_weight = 1; |
| rpath.frp_flags |= FIB_ROUTE_PATH_LOCAL; |
| /* |
| * set the path proto appropriately for the prefix |
| */ |
| rpath.frp_proto = fib_proto_to_dpo (pfx.fp_proto); |
| rpath.frp_mitf_flags = MFIB_ITF_FLAG_FORWARD; |
| |
| vec_add1 (rpaths, rpath); |
| } |
| else if (unformat (line_input, "via %U", |
| unformat_fib_route_path, &rpath, &payload_proto)) |
| { |
| vec_add1 (rpaths, rpath); |
| } |
| else if (unformat (line_input, "%U", |
| unformat_mfib_entry_flags, &eflags)) |
| ; |
| else |
| { |
| error = unformat_parse_error (line_input); |
| goto done; |
| } |
| } |
| |
| if (~0 == table_id) |
| { |
| /* |
| * if no table_id is passed we will manipulate the default |
| */ |
| fib_index = 0; |
| } |
| else |
| { |
| fib_index = mfib_table_find (pfx.fp_proto, table_id); |
| |
| if (~0 == fib_index) |
| { |
| error = clib_error_return (0, "Nonexistent table id %d", table_id); |
| goto done; |
| } |
| } |
| |
| timet[0] = vlib_time_now (vm); |
| |
| if (FIB_PROTOCOL_IP4 == pfx.fp_proto) |
| { |
| incr = 1 << (32 - (pfx.fp_len % 32)); |
| } |
| else |
| { |
| incr = 1 << (128 - (pfx.fp_len % 128)); |
| } |
| |
| for (ss = 0; ss < scount; ss++) |
| { |
| for (gg = 0; gg < gcount; gg++) |
| { |
| if (is_del && 0 == vec_len (rpaths)) |
| { |
| /* no path provided => route delete */ |
| mfib_table_entry_delete (fib_index, &pfx, MFIB_SOURCE_CLI); |
| } |
| else if (eflags || (MFIB_RPF_ID_NONE != rpf_id)) |
| { |
| mfib_table_entry_update (fib_index, &pfx, MFIB_SOURCE_CLI, |
| rpf_id, eflags); |
| } |
| else |
| { |
| if (is_del) |
| mfib_table_entry_path_remove (fib_index, |
| &pfx, MFIB_SOURCE_CLI, rpaths); |
| else |
| mfib_table_entry_path_update (fib_index, |
| &pfx, MFIB_SOURCE_CLI, rpaths); |
| } |
| |
| if (FIB_PROTOCOL_IP4 == pfx.fp_proto) |
| { |
| pfx.fp_grp_addr.ip4.as_u32 = |
| clib_host_to_net_u32 (incr + |
| clib_net_to_host_u32 (pfx. |
| fp_grp_addr.ip4. |
| as_u32)); |
| } |
| else |
| { |
| int bucket = (incr < 64 ? 0 : 1); |
| pfx.fp_grp_addr.ip6.as_u64[bucket] = |
| clib_host_to_net_u64 (incr + |
| clib_net_to_host_u64 (pfx. |
| fp_grp_addr.ip6.as_u64 |
| [bucket])); |
| |
| } |
| } |
| if (FIB_PROTOCOL_IP4 == pfx.fp_proto) |
| { |
| pfx.fp_src_addr.ip4.as_u32 = |
| clib_host_to_net_u32 (1 + |
| clib_net_to_host_u32 (pfx.fp_src_addr. |
| ip4.as_u32)); |
| } |
| else |
| { |
| pfx.fp_src_addr.ip6.as_u64[1] = |
| clib_host_to_net_u64 (1 + |
| clib_net_to_host_u64 (pfx.fp_src_addr. |
| ip6.as_u64[1])); |
| } |
| } |
| |
| timet[1] = vlib_time_now (vm); |
| |
| if (scount > 1 || gcount > 1) |
| vlib_cli_output (vm, "%.6e routes/sec", |
| (scount * gcount) / (timet[1] - timet[0])); |
| |
| done: |
| vec_free (rpaths); |
| unformat_free (line_input); |
| |
| return error; |
| } |
| |
| /*? |
| * This command is used to add or delete IPv4 or IPv6 multicast routes. All |
| * IP Addresses ('<em><dst-ip-addr>/<width></em>', |
| * '<em><next-hop-ip-addr></em>' and '<em><adj-hop-ip-addr></em>') |
| * can be IPv4 or IPv6, but all must be of the same form in a single |
| * command. To display the current set of routes, use the commands |
| * '<em>show ip mfib</em>' and '<em>show ip6 mfib</em>'. |
| * The full set of support flags for interfaces and route is shown via; |
| * '<em>show mfib route flags</em>' and '<em>show mfib itf flags</em>' |
| * respectively. |
| * @cliexpar |
| * Example of how to add a forwarding interface to a route (and create the |
| * route if it does not exist) |
| * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/0 Forward} |
| * Example of how to add an accepting interface to a route (and create the |
| * route if it does not exist) |
| * @cliexcmd{ip mroute add 232.1.1.1 via GigabitEthernet2/0/1 Accept} |
| * Example of changing the route's flags to send signals via the API |
| * @cliexcmd{ip mroute add 232.1.1.1 Signal} |
| |
| ?*/ |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (ip_mroute_command, static) = |
| { |
| .path = "ip mroute", |
| .short_help = "ip mroute [add|del] <dst-ip-addr>/<width> [table <table-id>] [rpf-id <ID>] [via <next-hop-ip-addr> [<interface>],", |
| .function = vnet_ip_mroute_cmd, |
| .is_mp_safe = 1, |
| }; |
| /* *INDENT-ON* */ |
| |
| clib_error_t * |
| vnet_ip_container_proxy_add_del (vnet_ip_container_proxy_args_t * args) |
| { |
| u32 fib_index; |
| |
| if (!vnet_sw_interface_is_api_valid (vnet_get_main (), args->sw_if_index)) |
| return clib_error_return_code (0, VNET_API_ERROR_INVALID_INTERFACE, 0, |
| "invalid sw_if_index"); |
| |
| fib_index = fib_table_get_table_id_for_sw_if_index (args->prefix.fp_proto, |
| args->sw_if_index); |
| if (args->is_add) |
| { |
| dpo_id_t proxy_dpo = DPO_INVALID; |
| l3_proxy_dpo_add_or_lock (fib_proto_to_dpo (args->prefix.fp_proto), |
| args->sw_if_index, &proxy_dpo); |
| fib_table_entry_special_dpo_add (fib_index, |
| &args->prefix, |
| FIB_SOURCE_PROXY, |
| FIB_ENTRY_FLAG_EXCLUSIVE, &proxy_dpo); |
| dpo_reset (&proxy_dpo); |
| } |
| else |
| { |
| fib_table_entry_special_remove (fib_index, &args->prefix, |
| FIB_SOURCE_PROXY); |
| } |
| return 0; |
| } |
| |
| u8 |
| ip_container_proxy_is_set (fib_prefix_t * pfx, u32 sw_if_index) |
| { |
| u32 fib_index; |
| fib_node_index_t fei; |
| const dpo_id_t *dpo; |
| l3_proxy_dpo_t *l3p; |
| load_balance_t *lb0; |
| |
| fib_index = fib_table_get_table_id_for_sw_if_index (pfx->fp_proto, |
| sw_if_index); |
| if (fib_index == ~0) |
| return 0; |
| |
| fei = fib_table_lookup_exact_match (fib_index, pfx); |
| if (fei == FIB_NODE_INDEX_INVALID) |
| return 0; |
| |
| dpo = fib_entry_contribute_ip_forwarding (fei); |
| lb0 = load_balance_get (dpo->dpoi_index); |
| dpo = load_balance_get_bucket_i (lb0, 0); |
| if (dpo->dpoi_type != DPO_L3_PROXY) |
| return 0; |
| |
| l3p = l3_proxy_dpo_get (dpo->dpoi_index); |
| return (l3p->l3p_sw_if_index == sw_if_index); |
| } |
| |
| typedef struct ip_container_proxy_walk_ctx_t_ |
| { |
| ip_container_proxy_cb_t cb; |
| void *ctx; |
| } ip_container_proxy_walk_ctx_t; |
| |
| static fib_table_walk_rc_t |
| ip_container_proxy_fib_table_walk (fib_node_index_t fei, void *arg) |
| { |
| ip_container_proxy_walk_ctx_t *ctx = arg; |
| const fib_prefix_t *pfx; |
| const dpo_id_t *dpo; |
| load_balance_t *lb; |
| l3_proxy_dpo_t *l3p; |
| |
| pfx = fib_entry_get_prefix (fei); |
| if (fib_entry_is_sourced (fei, FIB_SOURCE_PROXY)) |
| { |
| dpo = fib_entry_contribute_ip_forwarding (fei); |
| lb = load_balance_get (dpo->dpoi_index); |
| dpo = load_balance_get_bucket_i (lb, 0); |
| l3p = l3_proxy_dpo_get (dpo->dpoi_index); |
| ctx->cb (pfx, l3p->l3p_sw_if_index, ctx->ctx); |
| } |
| |
| return FIB_TABLE_WALK_CONTINUE; |
| } |
| |
| void |
| ip_container_proxy_walk (ip_container_proxy_cb_t cb, void *ctx) |
| { |
| fib_table_t *fib_table; |
| ip_container_proxy_walk_ctx_t wctx = { |
| .cb = cb, |
| .ctx = ctx, |
| }; |
| |
| /* *INDENT-OFF* */ |
| pool_foreach (fib_table, ip4_main.fibs, |
| ({ |
| fib_table_walk(fib_table->ft_index, |
| FIB_PROTOCOL_IP4, |
| ip_container_proxy_fib_table_walk, |
| &wctx); |
| })); |
| pool_foreach (fib_table, ip6_main.fibs, |
| ({ |
| fib_table_walk(fib_table->ft_index, |
| FIB_PROTOCOL_IP6, |
| ip_container_proxy_fib_table_walk, |
| &wctx); |
| })); |
| /* *INDENT-ON* */ |
| } |
| |
| clib_error_t * |
| ip_container_cmd (vlib_main_t * vm, |
| unformat_input_t * main_input, vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| fib_prefix_t pfx; |
| u32 is_del, addr_set = 0; |
| vnet_main_t *vnm; |
| u32 sw_if_index; |
| |
| vnm = vnet_get_main (); |
| is_del = 0; |
| sw_if_index = ~0; |
| clib_memset (&pfx, 0, sizeof (pfx)); |
| |
| /* Get a line of input. */ |
| if (!unformat_user (main_input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "%U", unformat_ip4_address, &pfx.fp_addr.ip4)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP4; |
| pfx.fp_len = 32; |
| addr_set = 1; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_ip6_address, &pfx.fp_addr.ip6)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP6; |
| pfx.fp_len = 128; |
| addr_set = 1; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_vnet_sw_interface, vnm, &sw_if_index)) |
| ; |
| else if (unformat (line_input, "del")) |
| is_del = 1; |
| else |
| { |
| unformat_free (line_input); |
| return (clib_error_return (0, "unknown input '%U'", |
| format_unformat_error, line_input)); |
| } |
| } |
| |
| if (~0 == sw_if_index || !addr_set) |
| { |
| unformat_free (line_input); |
| vlib_cli_output (vm, "interface and address must be set"); |
| return 0; |
| } |
| |
| vnet_ip_container_proxy_args_t args = { |
| .prefix = pfx, |
| .sw_if_index = sw_if_index, |
| .is_add = !is_del, |
| }; |
| vnet_ip_container_proxy_add_del (&args); |
| unformat_free (line_input); |
| return (NULL); |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (ip_container_command_node, static) = { |
| .path = "ip container", |
| .function = ip_container_cmd, |
| .short_help = "ip container <address> <interface>", |
| .is_mp_safe = 1, |
| }; |
| /* *INDENT-ON* */ |
| |
| clib_error_t * |
| show_ip_container_cmd_fn (vlib_main_t * vm, unformat_input_t * main_input, |
| vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| vnet_main_t *vnm = vnet_get_main (); |
| fib_prefix_t pfx; |
| u32 sw_if_index = ~0; |
| u8 has_proxy; |
| |
| if (!unformat_user (main_input, unformat_line_input, line_input)) |
| return 0; |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "%U", unformat_ip4_address, &pfx.fp_addr.ip4)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP4; |
| pfx.fp_len = 32; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_ip6_address, &pfx.fp_addr.ip6)) |
| { |
| pfx.fp_proto = FIB_PROTOCOL_IP6; |
| pfx.fp_len = 128; |
| } |
| else if (unformat (line_input, "%U", |
| unformat_vnet_sw_interface, vnm, &sw_if_index)) |
| ; |
| else |
| { |
| unformat_free (line_input); |
| return (clib_error_return (0, "unknown input '%U'", |
| format_unformat_error, line_input)); |
| } |
| } |
| |
| if (~0 == sw_if_index) |
| { |
| unformat_free (line_input); |
| vlib_cli_output (vm, "no interface"); |
| return (clib_error_return (0, "no interface")); |
| } |
| |
| has_proxy = ip_container_proxy_is_set (&pfx, sw_if_index); |
| vlib_cli_output (vm, "ip container proxy is: %s", has_proxy ? "on" : "off"); |
| |
| unformat_free (line_input); |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (show_ip_container_command, static) = { |
| .path = "show ip container", |
| .function = show_ip_container_cmd_fn, |
| .short_help = "show ip container <address> <interface>", |
| .is_mp_safe = 1, |
| }; |
| /* *INDENT-ON* */ |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |