| #!/usr/bin/env python |
| |
| import unittest |
| import socket |
| |
| from framework import VppTestCase, VppTestRunner |
| from vpp_sub_interface import VppSubInterface, VppDot1QSubint |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether, Dot1Q |
| from scapy.layers.inet6 import IPv6, UDP |
| |
| |
| class TestIPv6(VppTestCase): |
| """ IPv6 Test Case """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestIPv6, cls).setUpClass() |
| |
| def setUp(self): |
| """ |
| Perform test setup before test case. |
| |
| **Config:** |
| - create 3 pg interfaces |
| - untagged pg0 interface |
| - Dot1Q subinterface on pg1 |
| - Dot1AD subinterface on pg2 |
| - setup interfaces: |
| - put it into UP state |
| - set IPv6 addresses |
| - resolve neighbor address using NDP |
| - configure 200 fib entries |
| |
| :ivar list interfaces: pg interfaces and subinterfaces. |
| :ivar dict flows: IPv4 packet flows in test. |
| :ivar list pg_if_packet_sizes: packet sizes in test. |
| |
| *TODO:* Create AD sub interface |
| """ |
| super(TestIPv6, self).setUp() |
| |
| # create 3 pg interfaces |
| self.create_pg_interfaces(range(3)) |
| |
| # create 2 subinterfaces for p1 and pg2 |
| self.sub_interfaces = [ |
| VppDot1QSubint(self, self.pg1, 100), |
| VppDot1QSubint(self, self.pg2, 200) |
| # TODO: VppDot1ADSubint(self, self.pg2, 200, 300, 400) |
| ] |
| |
| # packet flows mapping pg0 -> pg1.sub, pg2.sub, etc. |
| self.flows = dict() |
| self.flows[self.pg0] = [self.pg1.sub_if, self.pg2.sub_if] |
| self.flows[self.pg1.sub_if] = [self.pg0, self.pg2.sub_if] |
| self.flows[self.pg2.sub_if] = [self.pg0, self.pg1.sub_if] |
| |
| # packet sizes |
| self.pg_if_packet_sizes = [64, 512, 1518, 9018] |
| self.sub_if_packet_sizes = [64, 512, 1518 + 4, 9018 + 4] |
| |
| self.interfaces = list(self.pg_interfaces) |
| self.interfaces.extend(self.sub_interfaces) |
| |
| # setup all interfaces |
| for i in self.interfaces: |
| i.admin_up() |
| i.config_ip6() |
| i.resolve_ndp() |
| |
| # config 2M FIB entries |
| self.config_fib_entries(200) |
| |
| def tearDown(self): |
| """Run standard test teardown and log ``show ip6 neighbors``.""" |
| super(TestIPv6, self).tearDown() |
| if not self.vpp_dead: |
| self.logger.info(self.vapi.cli("show ip6 neighbors")) |
| # info(self.vapi.cli("show ip6 fib")) # many entries |
| |
| def config_fib_entries(self, count): |
| """For each interface add to the FIB table *count* routes to |
| "fd02::1/128" destination with interface's local address as next-hop |
| address. |
| |
| :param int count: Number of FIB entries. |
| |
| - *TODO:* check if the next-hop address shouldn't be remote address |
| instead of local address. |
| """ |
| n_int = len(self.interfaces) |
| percent = 0 |
| counter = 0.0 |
| dest_addr = socket.inet_pton(socket.AF_INET6, "fd02::1") |
| dest_addr_len = 128 |
| for i in self.interfaces: |
| next_hop_address = i.local_ip6n |
| for j in range(count / n_int): |
| self.vapi.ip_add_del_route( |
| dest_addr, dest_addr_len, next_hop_address, is_ipv6=1) |
| counter += 1 |
| if counter / count * 100 > percent: |
| self.logger.info("Configure %d FIB entries .. %d%% done" % |
| (count, percent)) |
| percent += 1 |
| |
| def create_stream(self, src_if, packet_sizes): |
| """Create input packet stream for defined interface. |
| |
| :param VppInterface src_if: Interface to create packet stream for. |
| :param list packet_sizes: Required packet sizes. |
| """ |
| pkts = [] |
| for i in range(0, 257): |
| dst_if = self.flows[src_if][i % 2] |
| info = self.create_packet_info( |
| src_if.sw_if_index, dst_if.sw_if_index) |
| payload = self.info_to_payload(info) |
| p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| if isinstance(src_if, VppSubInterface): |
| p = src_if.add_dot1_layer(p) |
| size = packet_sizes[(i // 2) % len(packet_sizes)] |
| self.extend_packet(p, size) |
| pkts.append(p) |
| return pkts |
| |
| def verify_capture(self, dst_if, capture): |
| """Verify captured input packet stream for defined interface. |
| |
| :param VppInterface dst_if: Interface to verify captured packet stream |
| for. |
| :param list capture: Captured packet stream. |
| """ |
| self.logger.info("Verifying capture on interface %s" % dst_if.name) |
| last_info = dict() |
| for i in self.interfaces: |
| last_info[i.sw_if_index] = None |
| is_sub_if = False |
| dst_sw_if_index = dst_if.sw_if_index |
| if hasattr(dst_if, 'parent'): |
| is_sub_if = True |
| for packet in capture: |
| if is_sub_if: |
| # Check VLAN tags and Ethernet header |
| packet = dst_if.remove_dot1_layer(packet) |
| self.assertTrue(Dot1Q not in packet) |
| try: |
| ip = packet[IPv6] |
| udp = packet[UDP] |
| payload_info = self.payload_to_info(str(packet[Raw])) |
| packet_index = payload_info.index |
| self.assertEqual(payload_info.dst, dst_sw_if_index) |
| self.logger.debug("Got packet on port %s: src=%u (id=%u)" % |
| (dst_if.name, payload_info.src, packet_index)) |
| next_info = self.get_next_packet_info_for_interface2( |
| payload_info.src, dst_sw_if_index, |
| last_info[payload_info.src]) |
| last_info[payload_info.src] = next_info |
| self.assertTrue(next_info is not None) |
| self.assertEqual(packet_index, next_info.index) |
| saved_packet = next_info.data |
| # Check standard fields |
| self.assertEqual(ip.src, saved_packet[IPv6].src) |
| self.assertEqual(ip.dst, saved_packet[IPv6].dst) |
| self.assertEqual(udp.sport, saved_packet[UDP].sport) |
| self.assertEqual(udp.dport, saved_packet[UDP].dport) |
| except: |
| self.logger.error("Unexpected or invalid packet:") |
| self.logger.error(packet.show()) |
| raise |
| for i in self.interfaces: |
| remaining_packet = self.get_next_packet_info_for_interface2( |
| i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index]) |
| self.assertTrue( |
| remaining_packet is None, |
| "Interface %s: Packet expected from interface %s didn't arrive" % |
| (dst_if.name, i.name)) |
| |
| def test_fib(self): |
| """ IPv6 FIB test |
| |
| Test scenario: |
| - Create IPv6 stream for pg0 interface |
| - Create IPv6 tagged streams for pg1's and pg2's subinterface. |
| - Send and verify received packets on each interface. |
| """ |
| |
| pkts = self.create_stream(self.pg0, self.pg_if_packet_sizes) |
| self.pg0.add_stream(pkts) |
| |
| for i in self.sub_interfaces: |
| pkts = self.create_stream(i, self.sub_if_packet_sizes) |
| i.parent.add_stream(pkts) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| pkts = self.pg0.get_capture() |
| self.verify_capture(self.pg0, pkts) |
| |
| for i in self.sub_interfaces: |
| pkts = i.parent.get_capture() |
| self.verify_capture(i, pkts) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |