| /* |
| * Copyright (c) 2015 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #ifndef included_vnet_api_errno_h |
| #define included_vnet_api_errno_h |
| |
| #define foreach_vnet_api_error \ |
| _(UNSPECIFIED, -1, "Unspecified Error") \ |
| _(INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index") \ |
| _(NO_SUCH_FIB, -3, "No such FIB / VRF") \ |
| _(NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF") \ |
| _(NO_SUCH_LABEL, -5, "No such label") \ |
| _(NO_SUCH_ENTRY, -6, "No such entry") \ |
| _(INVALID_VALUE, -7, "Invalid value") \ |
| _(INVALID_VALUE_2, -8, "Invalid value #2") \ |
| _(UNIMPLEMENTED, -9, "Unimplemented") \ |
| _(INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2") \ |
| _(SYSCALL_ERROR_1, -11, "System call error #1") \ |
| _(SYSCALL_ERROR_2, -12, "System call error #2") \ |
| _(SYSCALL_ERROR_3, -13, "System call error #3") \ |
| _(SYSCALL_ERROR_4, -14, "System call error #4") \ |
| _(SYSCALL_ERROR_5, -15, "System call error #5") \ |
| _(SYSCALL_ERROR_6, -16, "System call error #6") \ |
| _(SYSCALL_ERROR_7, -17, "System call error #7") \ |
| _(SYSCALL_ERROR_8, -18, "System call error #8") \ |
| _(SYSCALL_ERROR_9, -19, "System call error #9") \ |
| _(SYSCALL_ERROR_10, -20, "System call error #10") \ |
| _(FEATURE_DISABLED, -30, "Feature disabled by configuration") \ |
| _(INVALID_REGISTRATION, -31, "Invalid registration") \ |
| _(NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB") \ |
| _(UNKNOWN_DESTINATION, -51, "Unknown destination") \ |
| _(PREFIX_MATCHES_NEXT_HOP, -52, "Prefix matches next hop") \ |
| _(NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)") \ |
| _(NO_MATCHING_INTERFACE, -54, "No matching interface for probe") \ |
| _(INVALID_VLAN, -55, "Invalid VLAN") \ |
| _(VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists") \ |
| _(INVALID_SRC_ADDRESS, -57, "Invalid src address") \ |
| _(INVALID_DST_ADDRESS, -58, "Invalid dst address") \ |
| _(ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch") \ |
| _(ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \ |
| _(ADDRESS_NOT_LINK_LOCAL, -61, "Address not link-local") \ |
| _(IP6_NOT_ENABLED, -62, "ip6 not enabled") \ |
| _(IN_PROGRESS, 10, "Operation in progress") \ |
| _(NO_SUCH_NODE, -63, "No such graph node") \ |
| _(NO_SUCH_NODE2, -64, "No such graph node #2") \ |
| _(NO_SUCH_TABLE, -65, "No such table") \ |
| _(NO_SUCH_TABLE2, -66, "No such table #2") \ |
| _(NO_SUCH_TABLE3, -67, "No such table #3") \ |
| _(SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists") \ |
| _(SUBIF_CREATE_FAILED, -69, "Subinterface creation failed") \ |
| _(INVALID_MEMORY_SIZE, -70, "Invalid memory size requested") \ |
| _(INVALID_INTERFACE, -71, "Invalid interface") \ |
| _(INVALID_VLAN_TAG_COUNT, -72, "Invalid number of tags for requested operation") \ |
| _(INVALID_ARGUMENT, -73, "Invalid argument") \ |
| _(UNEXPECTED_INTF_STATE, -74, "Unexpected interface state") \ |
| _(TUNNEL_EXIST, -75, "Tunnel already exists") \ |
| _(INVALID_DECAP_NEXT, -76, "Invalid decap-next") \ |
| _(RESPONSE_NOT_READY, -77, "Response not ready") \ |
| _(NOT_CONNECTED, -78, "Not connected to the data plane") \ |
| _(IF_ALREADY_EXISTS, -79, "Interface already exists") \ |
| _(BOND_SLAVE_NOT_ALLOWED, -80, "Operation not allowed on slave of BondEthernet") \ |
| _(VALUE_EXIST, -81, "Value already exists") \ |
| _(SAME_SRC_DST, -82, "Source and destination are the same") \ |
| _(IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, "IP6 multicast address required") \ |
| _(SR_POLICY_NAME_NOT_PRESENT, -84, "Segement routing policy name required") \ |
| _(NOT_RUNNING_AS_ROOT, -85, "Not running as root") \ |
| _(ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \ |
| _(UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \ |
| _(FAILED_TO_ATTACH_TO_JAVA_THREAD, -88, "Failed to attach to Java thread") \ |
| _(INVALID_WORKER, -89, "Invalid worker thread") \ |
| _(LISP_DISABLED, -90, "LISP is disabled") \ |
| _(CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found") \ |
| _(INVALID_EID_TYPE, -92, "Unsupported LSIP EID type") \ |
| _(CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file") \ |
| _(INCORRECT_ADJACENCY_TYPE, -94, "Invalid adjacency type for this operation") \ |
| _(EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, "Operation would exceed configured capacity of ranges") \ |
| _(EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, "Operation would exceed capacity of number of ports") \ |
| _(INVALID_ADDRESS_FAMILY, -97, "Invalid address family") \ |
| _(INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index") \ |
| _(TABLE_TOO_BIG, -99, "Table too big") \ |
| _(CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \ |
| _(BFD_EEXIST, -101, "Duplicate BFD object") \ |
| _(BFD_ENOENT, -102, "No such BFD object") \ |
| _(BFD_EINUSE, -103, "BFD object in use") \ |
| _(BFD_NOTSUPP, -104, "BFD feature not supported") \ |
| _(ADDRESS_IN_USE, -105, "Address in use") \ |
| _(ADDRESS_NOT_IN_USE, -106, "Address not in use") \ |
| _(QUEUE_FULL, -107, "Queue full") \ |
| _(UNKNOWN_URI_TYPE, -108, "Unknown URI type") \ |
| _(URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed") \ |
| _(LISP_RLOC_LOCAL, -110, "RLOC address is local") \ |
| _(BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time") \ |
| _(INVALID_GPE_MODE, -112, "Invalid GPE mode") \ |
| _(LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present") \ |
| _(ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface") \ |
| _(SESSION_CONNECT, -115, "Session failed to connect") \ |
| _(ENTRY_ALREADY_EXISTS, -116, "Entry already exists") \ |
| _(SVM_SEGMENT_CREATE_FAIL, -117, "svm segment create fail") \ |
| _(APPLICATION_NOT_ATTACHED, -118, "application not attached") \ |
| _(BD_ALREADY_EXISTS, -119, "Bridge domain already exists") \ |
| _(BD_IN_USE, -120, "Bridge domain has member interfaces") \ |
| _(BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \ |
| _(BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceed 16M limit") \ |
| _(SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist") \ |
| _(L2_MACS_EVENT_CLINET_PRESENT, -124, "Client already exist for L2 MACs events") \ |
| _(INVALID_QUEUE, -125, "Invalid queue") \ |
| _(UNSUPPORTED, -126, "Unsupported") \ |
| _(DUPLICATE_IF_ADDRESS, -127, "Address already present on another interface") \ |
| _(APP_INVALID_NS, -128, "Invalid application namespace") \ |
| _(APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret") \ |
| _(APP_CONNECT_SCOPE, -130, "Connect scope") \ |
| _(APP_ALREADY_ATTACHED, -131, "App already attached") \ |
| _(SESSION_REDIRECT, -132, "Redirect failed") \ |
| |
| typedef enum |
| { |
| #define _(a,b,c) VNET_API_ERROR_##a = (b), |
| foreach_vnet_api_error |
| #undef _ |
| VNET_API_N_ERROR, |
| } vnet_api_error_t; |
| |
| #endif /* included_vnet_api_errno_h */ |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |