dpdk/Makefile - fdio/vpp - Gitiles

 # Copyright (c) 2015 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # Scripts require non-POSIX parts of bash
 SHELL := /bin/bash

 DPDK_BUILD_DIR        ?= $(CURDIR)/_build
 DPDK_INSTALL_DIR      ?= $(CURDIR)/_install
 DPDK_PKTMBUF_HEADROOM ?= 128
 DPDK_CACHE_LINE_SIZE  ?= 64
 DPDK_DOWNLOAD_DIR     ?= $(HOME)/Downloads
 DPDK_DEBUG            ?= n
 DPDK_MLX4_PMD         ?= n
 DPDK_MLX5_PMD         ?= n
 DPDK_TAP_PMD          ?= n
 DPDK_FAILSAFE_PMD     ?= n

 B := $(DPDK_BUILD_DIR)
 I := $(DPDK_INSTALL_DIR)
 DPDK_VERSION ?= 18.02.1
 PKG_SUFFIX ?= vpp1
 DPDK_BASE_URL ?= http://fast.dpdk.org/rel
 DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
 DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
 DPDK_17.11_TARBALL_MD5_CKSUM := 53ee9e054a8797c9e67ffa0eb5d0c701
 DPDK_18.02.1_TARBALL_MD5_CKSUM := 3bbb5468f662e1f7472d4abc5c4cf08e
 DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
 MACHINE=$(shell uname -m)

 NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
 NASM_VER := 2.13.01
 NASM_TARBALL := nasm-$(NASM_VER).tar.xz
 NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
 NASM_SOURCE := $(B)/nasm-$(NASM_VER)

 ifeq ($(DPDK_VERSION),17.11)
 IPSEC_MB_VER ?= 0.47
 else
 IPSEC_MB_VER ?= 0.48
 endif

 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
   AESNI ?= y
 $(info Building IPSec-MB $(IPSEC_MB_VER) library)
 else
   AESNI ?= N
 endif

 AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
 AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
 AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)

 ifneq (,$(findstring clang,$(CC)))
 DPDK_CC=clang
 else ifneq (,$(findstring icc,$(CC)))
 DPDK_CC=icc
 else
 DPDK_CC=gcc
 endif

 ##############################################################################
 # Intel x86
 ##############################################################################
 ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
 DPDK_TARGET           ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
 DPDK_MACHINE          ?= nhm
 DPDK_TUNE             ?= core-avx2

 ##############################################################################
 # ARM64
 ##############################################################################
 else ifeq ($(MACHINE),aarch64)
 CROSS :=
 export CROSS
 DPDK_TARGET           ?= arm64-armv8a-linuxapp-$(DPDK_CC)
 DPDK_MACHINE          ?= armv8a
 DPDK_TUNE             ?= generic

 CPU_IMP_ARM                     = 0x41
 CPU_IMP_CAVIUM                  = 0x43

 CPU_PART_ARM_CORTEX_A53         = 0xd03
 CPU_PART_ARM_CORTEX_A57         = 0xd07
 CPU_PART_ARM_CORTEX_A72         = 0xd08
 CPU_PART_ARM_CORTEX_A73         = 0xd09

 CPU_PART_CAVIUM_THUNDERX        = 0x0a1
 CPU_PART_CAVIUM_THUNDERX_81XX   = 0x0a2
 CPU_PART_CAVIUM_THUNDERX_83XX   = 0x0a3

 MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo)
 MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo)

 ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM))
 ##############################################################################
 # Arm Cortex
 ##############################################################################
 CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \
 		     $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \
 		     $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \
 		     $(CPU_PART_ARM_CORTEX_A73)/cortex-a73
 CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE)))
 ifneq ($(CPU_TUNE),)
 DPDK_TUNE             = $(CPU_TUNE)
 else
 $(warning Unknown Arm CPU)
 endif

 else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM))
 ##############################################################################
 # Cavium ThunderX
 ##############################################################################
 ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \
 	$(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX)))
 DPDK_TARGET           = arm64-thunderx-linuxapp-$(DPDK_CC)
 DPDK_MACHINE          = thunderx
 else
 $(warning Unknown Cavium CPU)
 endif
 endif

 ##############################################################################
 # Unknown platform
 ##############################################################################
 else
 $(error Unknown platform)
 endif

 # /proc/cpuinfo does not exist on platforms without a /proc and on some
 # platforms, notably inside containers, it has no content. In those cases
 # we assume there's 1 processor; we use 2*ncpu for the -j option.
 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
 # for file presence and content; for now this will have to do.
 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
 	$(shell grep -c ^processor /proc/cpuinfo), 2)

 # compiler/linker custom arguments
 ifeq ($(DPDK_CC),clang)
 DPDK_CPU_CFLAGS := -fPIE -fPIC
 else
 DPDK_CPU_CFLAGS := -pie -fPIC
 endif

 ifeq ($(DPDK_DEBUG),n)
 DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
 else
 DPDK_EXTRA_CFLAGS := -g -O0
 endif

 DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)

 # assemble DPDK make arguments
 DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
 	T=$(DPDK_TARGET) \
 	RTE_CONFIG_TEMPLATE=../custom-config \
 	EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
 	EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
 	CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
 	DESTDIR=$(I) \
         $(DPDK_MAKE_EXTRA_ARGS)

 define set
 @if grep -q CONFIG_$1 $@ ; \
 	then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
 	else echo CONFIG_$1=$2 >> $@ ; \
 fi
 endef

 all: build

 $(B)/custom-config: $(B)/.patch.ok Makefile
 	@echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
 	@cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
 	$(call set,RTE_MACHINE,$(DPDK_MACHINE))
 	@# modify options
 	$(call set,RTE_MAX_LCORE,256)
 	$(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
 	$(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE))
 	$(call set,RTE_LIBEAL_USE_HPET,y)
 	$(call set,RTE_BUILD_COMBINE_LIBS,y)
 	$(call set,RTE_PCI_CONFIG,y)
 	$(call set,RTE_PCI_EXTENDED_TAG,"on")
 	$(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
 	@# enable debug init for device drivers
 	$(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
 	$(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
 	$(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
 	$(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
 	$(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
 	$(call set,RTE_LIBRTE_PMD_BOND,y)
 	$(call set,RTE_LIBRTE_IP_FRAG,y)
 	$(call set,RTE_LIBRTE_PMD_QAT,y)
 	$(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
 	$(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
 	$(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
 	$(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
 	$(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD))
 	$(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD))
 	$(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
 	$(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
 	@# not needed
 	$(call set,RTE_LIBRTE_TIMER,n)
 	$(call set,RTE_LIBRTE_CFGFILE,n)
 	$(call set,RTE_LIBRTE_LPM,n)
 	$(call set,RTE_LIBRTE_ACL,n)
 	$(call set,RTE_LIBRTE_POWER,n)
 	$(call set,RTE_LIBRTE_DISTRIBUTOR,n)
 	$(call set,RTE_LIBRTE_PORT,n)
 	$(call set,RTE_LIBRTE_TABLE,n)
 	$(call set,RTE_LIBRTE_PIPELINE,n)
 	$(call set,RTE_LIBRTE_FLOW_CLASSIFY,n)
 	$(call set,RTE_KNI_KMOD,n)
 	$(call set,RTE_EAL_IGB_UIO,n)
 	@# currently broken in 18.02
 	$(call set,RTE_LIBRTE_DPAA_BUS,n)
 	$(call set,RTE_LIBRTE_DPAA_MEMPOOL,n)
 	$(call set,RTE_LIBRTE_DPAA_PMD,n)
 	$(call set,RTE_LIBRTE_PMD_DPAA_SEC,n)
 	$(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n)
 	@rm -f .config.ok

 $(CURDIR)/$(DPDK_TARBALL):
 	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
 		then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
 		else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
 	fi
 	@rm -f $(B)/.download.ok

 $(CURDIR)/$(NASM_TARBALL):
 	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \
 		then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \
 		else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \
 	fi

 $(CURDIR)/$(AESNIMB_LIB_TARBALL):
 	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
 		then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
 		else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
 	fi

 DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
 ifeq ($(AESNI),y)
 DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL)
 DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
 endif

 $(B)/.download.ok: $(DPDK_DOWNLOADS)
 	@mkdir -p $(B)
 	@openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
 	@([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
 	( echo "Bad Checksum! Please remove $< and retry" && \
 		rm $(B)/$(DPDK_TARBALL).md5sum && false ))
 	@touch $@

 .PHONY: download
 download: $(B)/.download.ok

 $(B)/.extract.ok: $(B)/.download.ok
 	@echo --- extracting $(DPDK_TARBALL) ---
 	@tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
 ifeq ($(AESNI),y)
 	@echo --- extracting $(NASM_TARBALL) ---
 	@tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL)
 	@echo --- extracting $(AESNIMB_LIB_TARBALL) ---
 	@tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
 endif
 	@touch $@

 .PHONY: extract
 extract: $(B)/.extract.ok

 $(B)/.patch.ok: $(B)/.extract.ok
 ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
 	@echo --- patching ---
 	@for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
 		echo Applying patch: $$(basename $$f) ; \
 		patch -p1 -d $(DPDK_SOURCE) < $$f ; \
 	done
 endif
 	@touch $@

 .PHONY: patch
 patch: $(B)/.patch.ok

 $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
 	@make $(DPDK_MAKE_ARGS) config
 	@touch $@

 .PHONY: config
 config: $(B)/.config.ok

 .PHONY: build-nasm
 build-nasm:
 	cd $(NASM_SOURCE) && sh configure && make -j

 .PHONY: build-ipsec-mb
 build-ipsec-mb:
 	mkdir -p $(I)/lib/
 	# Do not build GCM stuff if we are building ISA_L
 	make -C $(AESNIMB_LIB_SOURCE) -j \
 	  EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
 	cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/

 .PHONY: build-dpdk
 build-dpdk:
 	@if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
 	@make $(DPDK_MAKE_ARGS) install

 # Order matters
 ifeq ($(AESNI),y)
 BUILD_TARGETS += build-nasm
 BUILD_TARGETS += build-ipsec-mb
 endif
 BUILD_TARGETS += build-dpdk

 $(B)/.build.ok: $(BUILD_TARGETS)
 	@touch $@

 .PHONY: build
 build: $(B)/.build.ok

 .PHONY: install
 install: $(B)/.build.ok

 .PHONY: clean
 clean:
 	@rm -rf $(B) $(I)

 ##############################################################################
 # .deb packaging
 ##############################################################################

 DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
 DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
 INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)

 .PHONY: build-deb install-deb check-deb

 deb/debian/changelog: Makefile
 	@echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
 	@echo "" >> $@
 	@echo "  * DPDK Release $(DPDK_VERSION)" >> $@
 	@echo "" >> $@
 	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@

 $(DEV_DEB): deb/debian/changelog
 	@cd deb && dpkg-buildpackage -b -uc -us
 	git clean -fdx deb

 build-deb: $(DEV_DEB)

 install-deb:
 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 	@echo "=========================================================="
 	@echo " Out of date DPDK package installed."
 	@echo " Installed: $(INSTALLED_DEB_VER)"
 	@echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)"
 	@echo "=========================================================="
 	@make $(DEV_DEB)
 	@sudo dpkg -i $(DEV_DEB)
 else
 	@echo "=========================================================="
 	@echo " Up-to-date DPDK package already installed"
 	@echo "=========================================================="
 endif

 check-deb:
 ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 	@echo "=========================================================="
 	@echo " Outdated DPDK package detected:"
 	@echo "  Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
 	@echo "  Current:   vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
 	@echo ""
 	@echo " Please upgrade by invoking 'make dpdk-install-dev'"
 	@echo " from the top level directory."
 	@echo "=========================================================="
 endif

 ##############################################################################
 # .rpm packaging
 ##############################################################################

 RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
 DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
 INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")

 .PHONY: build-rpm install-rpm check-rpm

 $(DEV_RPM): Makefile rpm/vpp-dpdk.spec
 	@rpmbuild -bb \
 	  --define "_topdir $(CURDIR)/rpm" \
 	  --define "_version $(DPDK_VERSION)" \
 	  --define "_release $(PKG_SUFFIX)" \
 	  $(CURDIR)/rpm/vpp-dpdk.spec
 	mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
 	git clean -fdx rpm

 build-rpm: $(DEV_RPM)

 install-rpm:
 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 	@$(MAKE) $(DEV_RPM)
 	sudo rpm -Uih $(DEV_RPM)
 else
 	@echo "=========================================================="
 	@echo " Up-to-date DPDK package already installed"
 	@echo "=========================================================="
 endif

 check-rpm:
 ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
 	@echo "=========================================================="
 	@echo " Outdated DPDK package detected:"
 	@echo "  Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
 	@echo "  Current:   vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
 	@echo ""
 	@echo " Please upgrade by invoking 'make dpdk-install-dev'"
 	@echo " from the top level directory."
 	@echo "=========================================================="
 endif

 ##############################################################################
 # ebuild support
 ##############################################################################

 .PHONY: ebuild-build ebuild-install

 ebuild-build:
 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
 	@echo "=========================================================="
 	@echo "Building DPDK from source. Consider installing development"
 	@echo "package by invoking 'make dpdk-install-dev' from the"
 	@echo "top level directory"
 	@echo "=========================================================="
 	make config
 else
 ifneq ($(INSTALLED_DEB_VER),)
 	make check-deb
 endif
 ifneq ($(INSTALLED_RPM_VER),)
 	make check-rpm
 endif
 endif

 ebuild-install:
 ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
 	make install
 endif
	# Copyright (c) 2015 Cisco and/or its affiliates.
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at:
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# Scripts require non-POSIX parts of bash
	SHELL := /bin/bash

	DPDK_BUILD_DIR ?= $(CURDIR)/_build
	DPDK_INSTALL_DIR ?= $(CURDIR)/_install
	DPDK_PKTMBUF_HEADROOM ?= 128
	DPDK_CACHE_LINE_SIZE ?= 64
	DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads
	DPDK_DEBUG ?= n
	DPDK_MLX4_PMD ?= n
	DPDK_MLX5_PMD ?= n
	DPDK_TAP_PMD ?= n
	DPDK_FAILSAFE_PMD ?= n

	B := $(DPDK_BUILD_DIR)
	I := $(DPDK_INSTALL_DIR)
	DPDK_VERSION ?= 18.02.1
	PKG_SUFFIX ?= vpp1
	DPDK_BASE_URL ?= http://fast.dpdk.org/rel
	DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
	DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
	DPDK_17.11_TARBALL_MD5_CKSUM := 53ee9e054a8797c9e67ffa0eb5d0c701
	DPDK_18.02.1_TARBALL_MD5_CKSUM := 3bbb5468f662e1f7472d4abc5c4cf08e
	DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
	MACHINE=$(shell uname -m)

	NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
	NASM_VER := 2.13.01
	NASM_TARBALL := nasm-$(NASM_VER).tar.xz
	NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
	NASM_SOURCE := $(B)/nasm-$(NASM_VER)

	ifeq ($(DPDK_VERSION),17.11)
	IPSEC_MB_VER ?= 0.47
	else
	IPSEC_MB_VER ?= 0.48
	endif

	ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
	AESNI ?= y
	$(info Building IPSec-MB $(IPSEC_MB_VER) library)
	else
	AESNI ?= N
	endif

	AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
	AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
	AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)

	ifneq (,$(findstring clang,$(CC)))
	DPDK_CC=clang
	else ifneq (,$(findstring icc,$(CC)))
	DPDK_CC=icc
	else
	DPDK_CC=gcc
	endif

	##############################################################################
	# Intel x86
	##############################################################################
	ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
	DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
	DPDK_MACHINE ?= nhm
	DPDK_TUNE ?= core-avx2

	##############################################################################
	# ARM64
	##############################################################################
	else ifeq ($(MACHINE),aarch64)
	CROSS :=
	export CROSS
	DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC)
	DPDK_MACHINE ?= armv8a
	DPDK_TUNE ?= generic

	CPU_IMP_ARM = 0x41
	CPU_IMP_CAVIUM = 0x43

	CPU_PART_ARM_CORTEX_A53 = 0xd03
	CPU_PART_ARM_CORTEX_A57 = 0xd07
	CPU_PART_ARM_CORTEX_A72 = 0xd08
	CPU_PART_ARM_CORTEX_A73 = 0xd09

	CPU_PART_CAVIUM_THUNDERX = 0x0a1
	CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2
	CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3

	MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo)
	MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo)

	ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM))
	##############################################################################
	# Arm Cortex
	##############################################################################
	CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \
	$(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \
	$(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \
	$(CPU_PART_ARM_CORTEX_A73)/cortex-a73
	CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE)))
	ifneq ($(CPU_TUNE),)
	DPDK_TUNE = $(CPU_TUNE)
	else
	$(warning Unknown Arm CPU)
	endif

	else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM))
	##############################################################################
	# Cavium ThunderX
	##############################################################################
	ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \
	$(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX)))
	DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC)
	DPDK_MACHINE = thunderx
	else
	$(warning Unknown Cavium CPU)
	endif
	endif

	##############################################################################
	# Unknown platform
	##############################################################################
	else
	$(error Unknown platform)
	endif

	# /proc/cpuinfo does not exist on platforms without a /proc and on some
	# platforms, notably inside containers, it has no content. In those cases
	# we assume there's 1 processor; we use 2*ncpu for the -j option.
	# NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
	# for file presence and content; for now this will have to do.
	JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
	$(shell grep -c ^processor /proc/cpuinfo), 2)

	# compiler/linker custom arguments
	ifeq ($(DPDK_CC),clang)
	DPDK_CPU_CFLAGS := -fPIE -fPIC
	else
	DPDK_CPU_CFLAGS := -pie -fPIC
	endif

	ifeq ($(DPDK_DEBUG),n)
	DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
	else
	DPDK_EXTRA_CFLAGS := -g -O0
	endif

	DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)

	# assemble DPDK make arguments
	DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
	T=$(DPDK_TARGET) \
	RTE_CONFIG_TEMPLATE=../custom-config \
	EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
	EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
	CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
	DESTDIR=$(I) \
	$(DPDK_MAKE_EXTRA_ARGS)

	define set
	@if grep -q CONFIG_$1 $@ ; \
	then sed -i -e 's/.\(CONFIG_$1=\)./\1$2/' $@ ; \
	else echo CONFIG_$1=$2 >> $@ ; \
	fi
	endef

	all: build

	$(B)/custom-config: $(B)/.patch.ok Makefile
	@echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
	@cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
	$(call set,RTE_MACHINE,$(DPDK_MACHINE))
	@# modify options
	$(call set,RTE_MAX_LCORE,256)
	$(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
	$(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE))
	$(call set,RTE_LIBEAL_USE_HPET,y)
	$(call set,RTE_BUILD_COMBINE_LIBS,y)
	$(call set,RTE_PCI_CONFIG,y)
	$(call set,RTE_PCI_EXTENDED_TAG,"on")
	$(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
	@# enable debug init for device drivers
	$(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
	$(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
	$(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
	$(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
	$(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
	$(call set,RTE_LIBRTE_PMD_BOND,y)
	$(call set,RTE_LIBRTE_IP_FRAG,y)
	$(call set,RTE_LIBRTE_PMD_QAT,y)
	$(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
	$(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
	$(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
	$(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
	$(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD))
	$(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD))
	$(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
	$(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
	@# not needed
	$(call set,RTE_LIBRTE_TIMER,n)
	$(call set,RTE_LIBRTE_CFGFILE,n)
	$(call set,RTE_LIBRTE_LPM,n)
	$(call set,RTE_LIBRTE_ACL,n)
	$(call set,RTE_LIBRTE_POWER,n)
	$(call set,RTE_LIBRTE_DISTRIBUTOR,n)
	$(call set,RTE_LIBRTE_PORT,n)
	$(call set,RTE_LIBRTE_TABLE,n)
	$(call set,RTE_LIBRTE_PIPELINE,n)
	$(call set,RTE_LIBRTE_FLOW_CLASSIFY,n)
	$(call set,RTE_KNI_KMOD,n)
	$(call set,RTE_EAL_IGB_UIO,n)
	@# currently broken in 18.02
	$(call set,RTE_LIBRTE_DPAA_BUS,n)
	$(call set,RTE_LIBRTE_DPAA_MEMPOOL,n)
	$(call set,RTE_LIBRTE_DPAA_PMD,n)
	$(call set,RTE_LIBRTE_PMD_DPAA_SEC,n)
	$(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n)
	@rm -f .config.ok

	$(CURDIR)/$(DPDK_TARBALL):
	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
	then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
	else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
	fi
	@rm -f $(B)/.download.ok

	$(CURDIR)/$(NASM_TARBALL):
	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \
	then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \
	else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \
	fi

	$(CURDIR)/$(AESNIMB_LIB_TARBALL):
	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
	then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
	else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
	fi

	DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
	ifeq ($(AESNI),y)
	DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL)
	DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
	endif

	$(B)/.download.ok: $(DPDK_DOWNLOADS)
	@mkdir -p $(B)
	@openssl md5 $< \| cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
	@([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] \|\| \
	( echo "Bad Checksum! Please remove $< and retry" && \
	rm $(B)/$(DPDK_TARBALL).md5sum && false ))
	@touch $@

	.PHONY: download
	download: $(B)/.download.ok

	$(B)/.extract.ok: $(B)/.download.ok
	@echo --- extracting $(DPDK_TARBALL) ---
	@tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
	ifeq ($(AESNI),y)
	@echo --- extracting $(NASM_TARBALL) ---
	@tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL)
	@echo --- extracting $(AESNIMB_LIB_TARBALL) ---
	@tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
	endif
	@touch $@

	.PHONY: extract
	extract: $(B)/.extract.ok

	$(B)/.patch.ok: $(B)/.extract.ok
	ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
	@echo --- patching ---
	@for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
	echo Applying patch: $$(basename $$f) ; \
	patch -p1 -d $(DPDK_SOURCE) < $$f ; \
	done
	endif
	@touch $@

	.PHONY: patch
	patch: $(B)/.patch.ok

	$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
	@make $(DPDK_MAKE_ARGS) config
	@touch $@

	.PHONY: config
	config: $(B)/.config.ok

	.PHONY: build-nasm
	build-nasm:
	cd $(NASM_SOURCE) && sh configure && make -j

	.PHONY: build-ipsec-mb
	build-ipsec-mb:
	mkdir -p $(I)/lib/
	# Do not build GCM stuff if we are building ISA_L
	make -C $(AESNIMB_LIB_SOURCE) -j \
	EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
	cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/

	.PHONY: build-dpdk
	build-dpdk:
	@if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
	@make $(DPDK_MAKE_ARGS) install

	# Order matters
	ifeq ($(AESNI),y)
	BUILD_TARGETS += build-nasm
	BUILD_TARGETS += build-ipsec-mb
	endif
	BUILD_TARGETS += build-dpdk

	$(B)/.build.ok: $(BUILD_TARGETS)
	@touch $@

	.PHONY: build
	build: $(B)/.build.ok

	.PHONY: install
	install: $(B)/.build.ok

	.PHONY: clean
	clean:
	@rm -rf $(B) $(I)

	##############################################################################
	# .deb packaging
	##############################################################################

	DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
	DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
	INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)

	.PHONY: build-deb install-deb check-deb

	deb/debian/changelog: Makefile
	@echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
	@echo "" >> $@
	@echo " * DPDK Release $(DPDK_VERSION)" >> $@
	@echo "" >> $@
	@echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@

	$(DEV_DEB): deb/debian/changelog
	@cd deb && dpkg-buildpackage -b -uc -us
	git clean -fdx deb

	build-deb: $(DEV_DEB)

	install-deb:
	ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
	@echo "=========================================================="
	@echo " Out of date DPDK package installed."
	@echo " Installed: $(INSTALLED_DEB_VER)"
	@echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)"
	@echo "=========================================================="
	@make $(DEV_DEB)
	@sudo dpkg -i $(DEV_DEB)
	else
	@echo "=========================================================="
	@echo " Up-to-date DPDK package already installed"
	@echo "=========================================================="
	endif

	check-deb:
	ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
	@echo "=========================================================="
	@echo " Outdated DPDK package detected:"
	@echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
	@echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
	@echo ""
	@echo " Please upgrade by invoking 'make dpdk-install-dev'"
	@echo " from the top level directory."
	@echo "=========================================================="
	endif

	##############################################################################
	# .rpm packaging
	##############################################################################

	RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
	DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
	INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null \| grep -v "not inst")

	.PHONY: build-rpm install-rpm check-rpm

	$(DEV_RPM): Makefile rpm/vpp-dpdk.spec
	@rpmbuild -bb \
	--define "_topdir $(CURDIR)/rpm" \
	--define "_version $(DPDK_VERSION)" \
	--define "_release $(PKG_SUFFIX)" \
	$(CURDIR)/rpm/vpp-dpdk.spec
	mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
	git clean -fdx rpm

	build-rpm: $(DEV_RPM)

	install-rpm:
	ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
	@$(MAKE) $(DEV_RPM)
	sudo rpm -Uih $(DEV_RPM)
	else
	@echo "=========================================================="
	@echo " Up-to-date DPDK package already installed"
	@echo "=========================================================="
	endif

	check-rpm:
	ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
	@echo "=========================================================="
	@echo " Outdated DPDK package detected:"
	@echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
	@echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
	@echo ""
	@echo " Please upgrade by invoking 'make dpdk-install-dev'"
	@echo " from the top level directory."
	@echo "=========================================================="
	endif

	##############################################################################
	# ebuild support
	##############################################################################

	.PHONY: ebuild-build ebuild-install

	ebuild-build:
	ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
	@echo "=========================================================="
	@echo "Building DPDK from source. Consider installing development"
	@echo "package by invoking 'make dpdk-install-dev' from the"
	@echo "top level directory"
	@echo "=========================================================="
	make config
	else
	ifneq ($(INSTALLED_DEB_VER),)
	make check-deb
	endif
	ifneq ($(INSTALLED_RPM_VER),)
	make check-rpm
	endif
	endif

	ebuild-install:
	ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
	make install
	endif