| #!/usr/bin/env python3 |
| from __future__ import print_function |
| import binascii |
| import random |
| import socket |
| import unittest |
| import time |
| import re |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, TCP, UDP |
| from scapy.layers.inet6 import IPv6 |
| from scapy.contrib.lacp import SlowProtocol, LACP |
| |
| from config import config |
| from framework import tag_fixme_vpp_workers, tag_fixme_ubuntu2204, tag_fixme_debian11 |
| from framework import is_distro_ubuntu2204, is_distro_debian11 |
| from framework import VppTestCase, VppTestRunner |
| from framework import tag_run_solo |
| from vpp_object import VppObject |
| from vpp_pg_interface import CaptureTimeoutError |
| from util import ppp |
| from ipfix import IPFIX, Set, Template, Data, IPFIXDecoder |
| from vpp_ip_route import VppIpRoute, VppRoutePath |
| from vpp_papi.macaddress import mac_ntop |
| from socket import inet_ntop |
| from vpp_papi import VppEnum |
| |
| |
| TMPL_COMMON_FIELD_COUNT = 6 |
| TMPL_L2_FIELD_COUNT = 3 |
| TMPL_L3_FIELD_COUNT = 4 |
| TMPL_L4_FIELD_COUNT = 3 |
| |
| IPFIX_TCP_FLAGS_ID = 6 |
| IPFIX_SRC_TRANS_PORT_ID = 7 |
| IPFIX_DST_TRANS_PORT_ID = 11 |
| |
| TCP_F_FIN = 0x01 |
| TCP_F_SYN = 0x02 |
| TCP_F_RST = 0x04 |
| TCP_F_PSH = 0x08 |
| TCP_F_ACK = 0x10 |
| TCP_F_URG = 0x20 |
| TCP_F_ECE = 0x40 |
| TCP_F_CWR = 0x80 |
| |
| |
| class VppCFLOW(VppObject): |
| """CFLOW object for IPFIX exporter and Flowprobe feature""" |
| |
| def __init__( |
| self, |
| test, |
| intf="pg2", |
| active=0, |
| passive=0, |
| timeout=100, |
| mtu=1024, |
| datapath="l2", |
| layer="l2 l3 l4", |
| direction="tx", |
| ): |
| self._test = test |
| self._intf = intf |
| self._intf_obj = getattr(self._test, intf) |
| self._active = active |
| if passive == 0 or passive < active: |
| self._passive = active + 1 |
| else: |
| self._passive = passive |
| self._datapath = datapath # l2 ip4 ip6 |
| self._collect = layer # l2 l3 l4 |
| self._direction = direction # rx tx both |
| self._timeout = timeout |
| self._mtu = mtu |
| self._configured = False |
| |
| def add_vpp_config(self): |
| self.enable_exporter() |
| l2_flag = 0 |
| l3_flag = 0 |
| l4_flag = 0 |
| if "l2" in self._collect.lower(): |
| l2_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L2 |
| if "l3" in self._collect.lower(): |
| l3_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L3 |
| if "l4" in self._collect.lower(): |
| l4_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L4 |
| self._test.vapi.flowprobe_set_params( |
| record_flags=(l2_flag | l3_flag | l4_flag), |
| active_timer=self._active, |
| passive_timer=self._passive, |
| ) |
| self.enable_flowprobe_feature() |
| self._test.vapi.cli("ipfix flush") |
| self._configured = True |
| |
| def remove_vpp_config(self): |
| self.disable_exporter() |
| self.disable_flowprobe_feature() |
| self._test.vapi.cli("ipfix flush") |
| self._configured = False |
| |
| def enable_exporter(self): |
| self._test.vapi.set_ipfix_exporter( |
| collector_address=self._test.pg0.remote_ip4, |
| src_address=self._test.pg0.local_ip4, |
| path_mtu=self._mtu, |
| template_interval=self._timeout, |
| ) |
| |
| def _enable_disable_flowprobe_feature(self, is_add): |
| which_map = { |
| "l2": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_L2, |
| "ip4": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4, |
| "ip6": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP6, |
| } |
| direction_map = { |
| "rx": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_RX, |
| "tx": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX, |
| "both": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_BOTH, |
| } |
| self._test.vapi.flowprobe_interface_add_del( |
| is_add=is_add, |
| which=which_map[self._datapath], |
| direction=direction_map[self._direction], |
| sw_if_index=self._intf_obj.sw_if_index, |
| ) |
| |
| def enable_flowprobe_feature(self): |
| self._enable_disable_flowprobe_feature(is_add=True) |
| |
| def disable_exporter(self): |
| self._test.vapi.cli("set ipfix exporter collector 0.0.0.0") |
| |
| def disable_flowprobe_feature(self): |
| self._enable_disable_flowprobe_feature(is_add=False) |
| |
| def object_id(self): |
| return "ipfix-collector-%s-%s" % (self._src, self.dst) |
| |
| def query_vpp_config(self): |
| return self._configured |
| |
| def verify_templates(self, decoder=None, timeout=1, count=3, field_count_in=None): |
| templates = [] |
| self._test.assertIn(count, (1, 2, 3)) |
| for _ in range(count): |
| p = self._test.wait_for_cflow_packet(self._test.collector, 2, timeout) |
| self._test.assertTrue(p.haslayer(IPFIX)) |
| self._test.assertTrue(p.haslayer(Template)) |
| if decoder is not None: |
| templates.append(p[Template].templateID) |
| decoder.add_template(p.getlayer(Template)) |
| if field_count_in is not None: |
| self._test.assertIn(p[Template].fieldCount, field_count_in) |
| return templates |
| |
| |
| class MethodHolder(VppTestCase): |
| """Flow-per-packet plugin: test L2, IP4, IP6 reporting""" |
| |
| # Test variables |
| debug_print = False |
| max_number_of_packets = 10 |
| pkts = [] |
| |
| @classmethod |
| def setUpClass(cls): |
| """ |
| Perform standard class setup (defined by class method setUpClass in |
| class VppTestCase) before running the test case, set test case related |
| variables and configure VPP. |
| """ |
| super(MethodHolder, cls).setUpClass() |
| if (is_distro_ubuntu2204 == True or is_distro_debian11 == True) and not hasattr( |
| cls, "vpp" |
| ): |
| return |
| try: |
| # Create pg interfaces |
| cls.create_pg_interfaces(range(9)) |
| |
| # Packet sizes |
| cls.pg_if_packet_sizes = [64, 512, 1518, 9018] |
| |
| # Create BD with MAC learning and unknown unicast flooding disabled |
| # and put interfaces to this BD |
| cls.vapi.bridge_domain_add_del_v2( |
| bd_id=1, uu_flood=1, learn=1, flood=1, forward=1, is_add=1 |
| ) |
| cls.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=cls.pg1._sw_if_index, bd_id=1 |
| ) |
| cls.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=cls.pg2._sw_if_index, bd_id=1 |
| ) |
| |
| # Set up all interfaces |
| for i in cls.pg_interfaces: |
| i.admin_up() |
| |
| cls.pg0.config_ip4() |
| cls.pg0.configure_ipv4_neighbors() |
| cls.collector = cls.pg0 |
| |
| cls.pg1.config_ip4() |
| cls.pg1.resolve_arp() |
| cls.pg2.config_ip4() |
| cls.pg2.resolve_arp() |
| cls.pg3.config_ip4() |
| cls.pg3.resolve_arp() |
| cls.pg4.config_ip4() |
| cls.pg4.resolve_arp() |
| cls.pg7.config_ip4() |
| cls.pg8.config_ip4() |
| cls.pg8.configure_ipv4_neighbors() |
| |
| cls.pg5.config_ip6() |
| cls.pg5.resolve_ndp() |
| cls.pg5.disable_ipv6_ra() |
| cls.pg6.config_ip6() |
| cls.pg6.resolve_ndp() |
| cls.pg6.disable_ipv6_ra() |
| except Exception: |
| super(MethodHolder, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(MethodHolder, cls).tearDownClass() |
| |
| def create_stream( |
| self, src_if=None, dst_if=None, packets=None, size=None, ip_ver="v4" |
| ): |
| """Create a packet stream to tickle the plugin |
| |
| :param VppInterface src_if: Source interface for packet stream |
| :param VppInterface src_if: Dst interface for packet stream |
| """ |
| if src_if is None: |
| src_if = self.pg1 |
| if dst_if is None: |
| dst_if = self.pg2 |
| self.pkts = [] |
| if packets is None: |
| packets = random.randint(1, self.max_number_of_packets) |
| pkt_size = size |
| for p in range(0, packets): |
| if size is None: |
| pkt_size = random.choice(self.pg_if_packet_sizes) |
| info = self.create_packet_info(src_if, dst_if) |
| payload = self.info_to_payload(info) |
| p = Ether(src=src_if.remote_mac, dst=src_if.local_mac) |
| if ip_ver == "v4": |
| p /= IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4) |
| else: |
| p /= IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6) |
| p /= UDP(sport=1234, dport=4321) |
| p /= Raw(payload) |
| info.data = p.copy() |
| self.extend_packet(p, pkt_size) |
| self.pkts.append(p) |
| |
| def verify_cflow_data(self, decoder, capture, cflow): |
| octets = 0 |
| packets = 0 |
| for p in capture: |
| octets += p[IP].len |
| packets += 1 |
| if cflow.haslayer(Data): |
| data = decoder.decode_data_set(cflow.getlayer(Set)) |
| for record in data: |
| self.assertEqual(int(binascii.hexlify(record[1]), 16), octets) |
| self.assertEqual(int(binascii.hexlify(record[2]), 16), packets) |
| |
| def send_packets(self, src_if=None, dst_if=None): |
| if src_if is None: |
| src_if = self.pg1 |
| if dst_if is None: |
| dst_if = self.pg2 |
| self.pg_enable_capture([dst_if]) |
| src_if.add_stream(self.pkts) |
| self.pg_start() |
| return dst_if.get_capture(len(self.pkts)) |
| |
| def verify_cflow_data_detail( |
| self, |
| decoder, |
| capture, |
| cflow, |
| data_set={1: "octets", 2: "packets"}, |
| ip_ver="v4", |
| field_count=None, |
| ): |
| if self.debug_print: |
| print(capture[0].show()) |
| if cflow.haslayer(Data): |
| data = decoder.decode_data_set(cflow.getlayer(Set)) |
| if self.debug_print: |
| print(data) |
| if ip_ver == "v4": |
| ip_layer = capture[0][IP] if capture[0].haslayer(IP) else None |
| else: |
| ip_layer = capture[0][IPv6] if capture[0].haslayer(IPv6) else None |
| if data_set is not None: |
| for record in data: |
| # skip flow if ingress/egress interface is 0 |
| if int(binascii.hexlify(record[10]), 16) == 0: |
| continue |
| if int(binascii.hexlify(record[14]), 16) == 0: |
| continue |
| |
| for field in data_set: |
| value = data_set[field] |
| if value == "octets": |
| value = ip_layer.len |
| if ip_ver == "v6": |
| value += 40 # ??? is this correct |
| elif value == "packets": |
| value = 1 |
| elif value == "src_ip": |
| if ip_ver == "v4": |
| ip = socket.inet_pton(socket.AF_INET, ip_layer.src) |
| else: |
| ip = socket.inet_pton(socket.AF_INET6, ip_layer.src) |
| value = int(binascii.hexlify(ip), 16) |
| elif value == "dst_ip": |
| if ip_ver == "v4": |
| ip = socket.inet_pton(socket.AF_INET, ip_layer.dst) |
| else: |
| ip = socket.inet_pton(socket.AF_INET6, ip_layer.dst) |
| value = int(binascii.hexlify(ip), 16) |
| elif value == "sport": |
| value = int(capture[0][UDP].sport) |
| elif value == "dport": |
| value = int(capture[0][UDP].dport) |
| self.assertEqual( |
| int(binascii.hexlify(record[field]), 16), value |
| ) |
| if field_count is not None: |
| for record in data: |
| self.assertEqual(len(record), field_count) |
| |
| def verify_cflow_data_notimer(self, decoder, capture, cflows): |
| idx = 0 |
| for cflow in cflows: |
| if cflow.haslayer(Data): |
| data = decoder.decode_data_set(cflow.getlayer(Set)) |
| else: |
| raise Exception("No CFLOW data") |
| |
| for rec in data: |
| p = capture[idx] |
| idx += 1 |
| self.assertEqual(p[IP].len, int(binascii.hexlify(rec[1]), 16)) |
| self.assertEqual(1, int(binascii.hexlify(rec[2]), 16)) |
| self.assertEqual(len(capture), idx) |
| |
| def wait_for_cflow_packet(self, collector_intf, set_id=2, timeout=1): |
| """wait for CFLOW packet and verify its correctness |
| |
| :param timeout: how long to wait |
| |
| """ |
| self.logger.info("IPFIX: Waiting for CFLOW packet") |
| # self.logger.debug(self.vapi.ppcli("show flow table")) |
| p = collector_intf.wait_for_packet(timeout=timeout) |
| self.assertEqual(p[Set].setID, set_id) |
| # self.logger.debug(self.vapi.ppcli("show flow table")) |
| self.logger.debug(ppp("IPFIX: Got packet:", p)) |
| return p |
| |
| |
| @tag_run_solo |
| @tag_fixme_vpp_workers |
| @tag_fixme_ubuntu2204 |
| @tag_fixme_debian11 |
| class Flowprobe(MethodHolder): |
| """Template verification, timer tests""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(Flowprobe, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(Flowprobe, cls).tearDownClass() |
| |
| def test_0001(self): |
| """timer less than template timeout""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self, active=2) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream(packets=1) |
| self.send_packets() |
| capture = self.pg2.get_capture(1) |
| |
| # make sure the one packet we expect actually showed up |
| cflow = self.wait_for_cflow_packet(self.collector, templates[1], 15) |
| self.verify_cflow_data(ipfix_decoder, capture, cflow) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_0002(self): |
| """timer greater than template timeout""" |
| self.logger.info("FFP_TEST_START_0002") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self, timeout=3, active=4) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| ipfix.verify_templates() |
| |
| self.create_stream(packets=2) |
| self.send_packets() |
| capture = self.pg2.get_capture(2) |
| |
| # next set of template packet should arrive after 20 seconds |
| # template packet should arrive within 20 s |
| templates = ipfix.verify_templates(ipfix_decoder, timeout=5) |
| |
| # make sure the one packet we expect actually showed up |
| cflow = self.wait_for_cflow_packet(self.collector, templates[1], 15) |
| self.verify_cflow_data(ipfix_decoder, capture, cflow) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0002") |
| |
| def test_cflow_packet(self): |
| """verify cflow packet fields""" |
| self.logger.info("FFP_TEST_START_0000") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, intf="pg8", datapath="ip4", layer="l2 l3 l4", active=2 |
| ) |
| ipfix.add_vpp_config() |
| |
| route_9001 = VppIpRoute( |
| self, |
| "9.0.0.0", |
| 24, |
| [VppRoutePath(self.pg8._remote_hosts[0].ip4, self.pg8.sw_if_index)], |
| ) |
| route_9001.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.pkts = [ |
| ( |
| Ether(dst=self.pg7.local_mac, src=self.pg7.remote_mac) |
| / IP(src=self.pg7.remote_ip4, dst="9.0.0.100") |
| / TCP(sport=1234, dport=4321, flags=80) |
| / Raw(b"\xa5" * 100) |
| ) |
| ] |
| |
| nowUTC = int(time.time()) |
| nowUNIX = nowUTC + 2208988800 |
| self.send_packets(src_if=self.pg7, dst_if=self.pg8) |
| |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0], 10) |
| self.collector.get_capture(2) |
| |
| if cflow[0].haslayer(IPFIX): |
| self.assertEqual(cflow[IPFIX].version, 10) |
| self.assertEqual(cflow[IPFIX].observationDomainID, 1) |
| self.assertEqual(cflow[IPFIX].sequenceNumber, 0) |
| self.assertAlmostEqual(cflow[IPFIX].exportTime, nowUTC, delta=5) |
| if cflow.haslayer(Data): |
| record = ipfix_decoder.decode_data_set(cflow[0].getlayer(Set))[0] |
| # ingress interface |
| self.assertEqual(int(binascii.hexlify(record[10]), 16), 8) |
| # egress interface |
| self.assertEqual(int(binascii.hexlify(record[14]), 16), 9) |
| # direction |
| self.assertEqual(int(binascii.hexlify(record[61]), 16), 1) |
| # packets |
| self.assertEqual(int(binascii.hexlify(record[2]), 16), 1) |
| # src mac |
| self.assertEqual(mac_ntop(record[56]), self.pg8.local_mac) |
| # dst mac |
| self.assertEqual(mac_ntop(record[80]), self.pg8.remote_mac) |
| flowTimestamp = int(binascii.hexlify(record[156]), 16) >> 32 |
| # flow start timestamp |
| self.assertAlmostEqual(flowTimestamp, nowUNIX, delta=1) |
| flowTimestamp = int(binascii.hexlify(record[157]), 16) >> 32 |
| # flow end timestamp |
| self.assertAlmostEqual(flowTimestamp, nowUNIX, delta=1) |
| # ethernet type |
| self.assertEqual(int(binascii.hexlify(record[256]), 16), 8) |
| # src ip |
| self.assertEqual(inet_ntop(socket.AF_INET, record[8]), self.pg7.remote_ip4) |
| # dst ip |
| self.assertEqual(inet_ntop(socket.AF_INET, record[12]), "9.0.0.100") |
| # protocol (TCP) |
| self.assertEqual(int(binascii.hexlify(record[4]), 16), 6) |
| # src port |
| self.assertEqual(int(binascii.hexlify(record[7]), 16), 1234) |
| # dst port |
| self.assertEqual(int(binascii.hexlify(record[11]), 16), 4321) |
| # tcp flags |
| self.assertEqual(int(binascii.hexlify(record[6]), 16), 80) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0000") |
| |
| def test_flow_entry_reuse(self): |
| """Verify flow entry reuse doesn't accumulate meta info""" |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| # enable ip4 datapath for an interface |
| # set active and passive timers |
| ipfix = VppCFLOW( |
| test=self, |
| active=2, |
| passive=3, |
| intf="pg3", |
| layer="l3 l4", |
| datapath="ip4", |
| direction="rx", |
| mtu=100, |
| ) |
| ipfix.add_vpp_config() |
| |
| # template packet should arrive immediately |
| ipfix_decoder = IPFIXDecoder() |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| # make a tcp packet |
| self.pkts = [ |
| ( |
| Ether(src=self.pg3.remote_mac, dst=self.pg4.local_mac) |
| / IP(src=self.pg3.remote_ip4, dst=self.pg4.remote_ip4) |
| / TCP(sport=1234, dport=4321) |
| / Raw(b"\xa5" * 50) |
| ) |
| ] |
| |
| # send the tcp packet two times, each time with new set of flags |
| tcp_flags = ( |
| TCP_F_SYN | TCP_F_ACK, |
| TCP_F_RST | TCP_F_PSH, |
| ) |
| for f in tcp_flags: |
| self.pkts[0][TCP].flags = f |
| capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4) |
| |
| # verify meta info - packet/octet delta and tcp flags |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0], timeout=6) |
| self.verify_cflow_data(ipfix_decoder, capture, cflow) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| { |
| IPFIX_TCP_FLAGS_ID: f, |
| IPFIX_SRC_TRANS_PORT_ID: 1234, |
| IPFIX_DST_TRANS_PORT_ID: 4321, |
| }, |
| ) |
| |
| self.collector.get_capture(3) |
| |
| # cleanup |
| ipfix.remove_vpp_config() |
| |
| def test_interface_dump(self): |
| """Dump interfaces with IPFIX flow record generation enabled""" |
| self.logger.info("FFP_TEST_START_0003") |
| |
| # Enable feature for 3 interfaces |
| ipfix1 = VppCFLOW(test=self, intf="pg1", datapath="l2", direction="rx") |
| ipfix1.add_vpp_config() |
| |
| ipfix2 = VppCFLOW(test=self, intf="pg2", datapath="ip4", direction="tx") |
| ipfix2.enable_flowprobe_feature() |
| |
| ipfix3 = VppCFLOW(test=self, intf="pg3", datapath="ip6", direction="both") |
| ipfix3.enable_flowprobe_feature() |
| |
| # When request "all", dump should contain all enabled interfaces |
| dump = self.vapi.flowprobe_interface_dump() |
| self.assertEqual(len(dump), 3) |
| |
| # Verify 1st interface |
| self.assertEqual(dump[0].sw_if_index, self.pg1.sw_if_index) |
| self.assertEqual( |
| dump[0].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_L2 |
| ) |
| self.assertEqual( |
| dump[0].direction, |
| VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_RX, |
| ) |
| |
| # Verify 2nd interface |
| self.assertEqual(dump[1].sw_if_index, self.pg2.sw_if_index) |
| self.assertEqual( |
| dump[1].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4 |
| ) |
| self.assertEqual( |
| dump[1].direction, |
| VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX, |
| ) |
| |
| # Verify 3rd interface |
| self.assertEqual(dump[2].sw_if_index, self.pg3.sw_if_index) |
| self.assertEqual( |
| dump[2].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP6 |
| ) |
| self.assertEqual( |
| dump[2].direction, |
| VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_BOTH, |
| ) |
| |
| # When request 2nd interface, dump should contain only the specified interface |
| dump = self.vapi.flowprobe_interface_dump(sw_if_index=self.pg2.sw_if_index) |
| self.assertEqual(len(dump), 1) |
| |
| # Verify 2nd interface |
| self.assertEqual(dump[0].sw_if_index, self.pg2.sw_if_index) |
| self.assertEqual( |
| dump[0].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4 |
| ) |
| self.assertEqual( |
| dump[0].direction, |
| VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX, |
| ) |
| |
| # When request 99th interface, dump should be empty |
| dump = self.vapi.flowprobe_interface_dump(sw_if_index=99) |
| self.assertEqual(len(dump), 0) |
| |
| ipfix1.remove_vpp_config() |
| ipfix2.remove_vpp_config() |
| ipfix3.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0003") |
| |
| def test_get_params(self): |
| """Get IPFIX flow record generation parameters""" |
| self.logger.info("FFP_TEST_START_0004") |
| |
| # Enable feature for an interface with custom parameters |
| ipfix = VppCFLOW(test=self, active=20, passive=40, layer="l2 l3 l4") |
| ipfix.add_vpp_config() |
| |
| # Get and verify parameters |
| params = self.vapi.flowprobe_get_params() |
| self.assertEqual(params.active_timer, 20) |
| self.assertEqual(params.passive_timer, 40) |
| record_flags = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L2 |
| record_flags |= VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L3 |
| record_flags |= VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L4 |
| self.assertEqual(params.record_flags, record_flags) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0004") |
| |
| |
| class DatapathTestsHolder(object): |
| """collect information on Ethernet, IP4 and IP6 datapath (no timers)""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(DatapathTestsHolder, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(DatapathTestsHolder, cls).tearDownClass() |
| |
| def test_templatesL2(self): |
| """verify template on L2 datapath""" |
| self.logger.info("FFP_TEST_START_0000") |
| self.pg_enable_capture(self.pg_interfaces) |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, layer="l2", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| # template packet should arrive immediately |
| self.vapi.ipfix_flush() |
| ipfix.verify_templates(timeout=3, count=1) |
| self.collector.get_capture(1) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0000") |
| |
| def test_L2onL2(self): |
| """L2 data on L2 datapath""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, layer="l2", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(packets=1) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 256: 8, 61: (self.direction == "tx")}, |
| ) |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_L3onL2(self): |
| """L3 data on L2 datapath""" |
| self.logger.info("FFP_TEST_START_0002") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, layer="l3", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=2) |
| |
| self.create_stream(packets=1) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| { |
| 2: "packets", |
| 4: 17, |
| 8: "src_ip", |
| 12: "dst_ip", |
| 61: (self.direction == "tx"), |
| }, |
| ) |
| |
| self.collector.get_capture(3) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0002") |
| |
| def test_L234onL2(self): |
| """L2/3/4 data on L2 datapath""" |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, layer="l2 l3 l4", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| tmpl_l2_field_count = TMPL_COMMON_FIELD_COUNT + TMPL_L2_FIELD_COUNT |
| tmpl_ip_field_count = ( |
| TMPL_COMMON_FIELD_COUNT |
| + TMPL_L2_FIELD_COUNT |
| + TMPL_L3_FIELD_COUNT |
| + TMPL_L4_FIELD_COUNT |
| ) |
| templates = ipfix.verify_templates( |
| ipfix_decoder, |
| count=3, |
| field_count_in=(tmpl_l2_field_count, tmpl_ip_field_count), |
| ) |
| |
| # verify IPv4 and IPv6 flows |
| for ip_ver in ("v4", "v6"): |
| self.create_stream(packets=1, ip_ver=ip_ver) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet( |
| self.collector, templates[1 if ip_ver == "v4" else 2] |
| ) |
| src_ip_id = 8 if ip_ver == "v4" else 27 |
| dst_ip_id = 12 if ip_ver == "v4" else 28 |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| { |
| 2: "packets", |
| 256: 8 if ip_ver == "v4" else 56710, |
| 4: 17, |
| 7: "sport", |
| 11: "dport", |
| src_ip_id: "src_ip", |
| dst_ip_id: "dst_ip", |
| 61: (self.direction == "tx"), |
| }, |
| ip_ver=ip_ver, |
| field_count=tmpl_ip_field_count, |
| ) |
| |
| # verify non-IP flow |
| self.pkts = [ |
| ( |
| Ether(dst=self.pg2.local_mac, src=self.pg1.remote_mac) |
| / SlowProtocol() |
| / LACP() |
| ) |
| ] |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 256: 2440, 61: (self.direction == "tx")}, |
| field_count=tmpl_l2_field_count, |
| ) |
| |
| self.collector.get_capture(6) |
| |
| ipfix.remove_vpp_config() |
| |
| def test_L4onL2(self): |
| """L4 data on L2 datapath""" |
| self.logger.info("FFP_TEST_START_0003") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, layer="l4", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=2) |
| |
| self.create_stream(packets=1) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")}, |
| ) |
| |
| self.collector.get_capture(3) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0003") |
| |
| def test_templatesIp4(self): |
| """verify templates on IP4 datapath""" |
| self.logger.info("FFP_TEST_START_0000") |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, datapath="ip4", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| # template packet should arrive immediately |
| self.vapi.ipfix_flush() |
| ipfix.verify_templates(timeout=3, count=1) |
| self.collector.get_capture(1) |
| |
| ipfix.remove_vpp_config() |
| |
| self.logger.info("FFP_TEST_FINISH_0000") |
| |
| def test_L2onIP4(self): |
| """L2 data on IP4 datapath""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf2, |
| layer="l2", |
| datapath="ip4", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1) |
| capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 256: 8, 61: (self.direction == "tx")}, |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_L3onIP4(self): |
| """L3 data on IP4 datapath""" |
| self.logger.info("FFP_TEST_START_0002") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf2, |
| layer="l3", |
| datapath="ip4", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1) |
| capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| { |
| 1: "octets", |
| 2: "packets", |
| 8: "src_ip", |
| 12: "dst_ip", |
| 61: (self.direction == "tx"), |
| }, |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0002") |
| |
| def test_L4onIP4(self): |
| """L4 data on IP4 datapath""" |
| self.logger.info("FFP_TEST_START_0003") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf2, |
| layer="l4", |
| datapath="ip4", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1) |
| capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")}, |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0003") |
| |
| def test_templatesIP6(self): |
| """verify templates on IP6 datapath""" |
| self.logger.info("FFP_TEST_START_0000") |
| self.pg_enable_capture(self.pg_interfaces) |
| |
| ipfix = VppCFLOW( |
| test=self, intf=self.intf1, datapath="ip6", direction=self.direction |
| ) |
| ipfix.add_vpp_config() |
| |
| # template packet should arrive immediately |
| ipfix.verify_templates(count=1) |
| self.collector.get_capture(1) |
| |
| ipfix.remove_vpp_config() |
| |
| self.logger.info("FFP_TEST_FINISH_0000") |
| |
| def test_L2onIP6(self): |
| """L2 data on IP6 datapath""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf3, |
| layer="l2", |
| datapath="ip6", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6") |
| capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 256: 56710, 61: (self.direction == "tx")}, |
| ip_ver="v6", |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_L3onIP6(self): |
| """L3 data on IP6 datapath""" |
| self.logger.info("FFP_TEST_START_0002") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf3, |
| layer="l3", |
| datapath="ip6", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6") |
| capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 27: "src_ip", 28: "dst_ip", 61: (self.direction == "tx")}, |
| ip_ver="v6", |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0002") |
| |
| def test_L4onIP6(self): |
| """L4 data on IP6 datapath""" |
| self.logger.info("FFP_TEST_START_0003") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW( |
| test=self, |
| intf=self.intf3, |
| layer="l4", |
| datapath="ip6", |
| direction=self.direction, |
| ) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder, count=1) |
| |
| self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6") |
| capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6) |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[0]) |
| self.verify_cflow_data_detail( |
| ipfix_decoder, |
| capture, |
| cflow, |
| {2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")}, |
| ip_ver="v6", |
| ) |
| |
| # expected two templates and one cflow packet |
| self.collector.get_capture(2) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0003") |
| |
| def test_0001(self): |
| """no timers, one CFLOW packet, 9 Flows inside""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self, intf=self.intf1, direction=self.direction) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream(packets=9) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| cflow = self.wait_for_cflow_packet(self.collector, templates[1]) |
| self.verify_cflow_data_notimer(ipfix_decoder, capture, [cflow]) |
| self.collector.get_capture(4) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_0002(self): |
| """no timers, two CFLOW packets (mtu=260), 3 Flows in each""" |
| self.logger.info("FFP_TEST_START_0002") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self, intf=self.intf1, direction=self.direction, mtu=260) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| self.vapi.ipfix_flush() |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream(packets=6) |
| capture = self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| cflows = [] |
| self.vapi.ipfix_flush() |
| cflows.append(self.wait_for_cflow_packet(self.collector, templates[1])) |
| cflows.append(self.wait_for_cflow_packet(self.collector, templates[1])) |
| self.verify_cflow_data_notimer(ipfix_decoder, capture, cflows) |
| self.collector.get_capture(5) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0002") |
| |
| |
| @tag_fixme_vpp_workers |
| class DatapathTx(MethodHolder, DatapathTestsHolder): |
| """Collect info on Ethernet, IP4 and IP6 datapath (TX) (no timers)""" |
| |
| intf1 = "pg2" |
| intf2 = "pg4" |
| intf3 = "pg6" |
| direction = "tx" |
| |
| |
| @tag_fixme_vpp_workers |
| class DatapathRx(MethodHolder, DatapathTestsHolder): |
| """Collect info on Ethernet, IP4 and IP6 datapath (RX) (no timers)""" |
| |
| intf1 = "pg1" |
| intf2 = "pg3" |
| intf3 = "pg5" |
| direction = "rx" |
| |
| |
| @unittest.skipUnless(config.extended, "part of extended tests") |
| class DisableIPFIX(MethodHolder): |
| """Disable IPFIX""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(DisableIPFIX, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(DisableIPFIX, cls).tearDownClass() |
| |
| def test_0001(self): |
| """disable IPFIX after first packets""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream() |
| self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| self.wait_for_cflow_packet(self.collector, templates[1]) |
| self.collector.get_capture(4) |
| |
| # disable IPFIX |
| ipfix.disable_exporter() |
| self.pg_enable_capture([self.collector]) |
| |
| self.send_packets() |
| |
| # make sure no one packet arrived in 1 minute |
| self.vapi.ipfix_flush() |
| self.sleep(1, "wait before verifying no packets sent") |
| self.collector.assert_nothing_captured() |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| |
| @unittest.skipUnless(config.extended, "part of extended tests") |
| class ReenableIPFIX(MethodHolder): |
| """Re-enable IPFIX""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(ReenableIPFIX, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(ReenableIPFIX, cls).tearDownClass() |
| |
| def test_0011(self): |
| """disable IPFIX after first packets and re-enable after few packets""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream(packets=5) |
| self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| self.wait_for_cflow_packet(self.collector, templates[1]) |
| self.collector.get_capture(4) |
| |
| # disable IPFIX |
| ipfix.disable_exporter() |
| self.vapi.ipfix_flush() |
| self.pg_enable_capture([self.collector]) |
| |
| self.send_packets() |
| |
| # make sure no one packet arrived in active timer span |
| self.vapi.ipfix_flush() |
| self.sleep(1, "wait before verifying no packets sent") |
| self.collector.assert_nothing_captured() |
| self.pg2.get_capture(5) |
| |
| # enable IPFIX |
| ipfix.enable_exporter() |
| |
| capture = self.collector.get_capture(4) |
| nr_templates = 0 |
| nr_data = 0 |
| for p in capture: |
| self.assertTrue(p.haslayer(IPFIX)) |
| if p.haslayer(Template): |
| nr_templates += 1 |
| self.assertTrue(nr_templates, 3) |
| for p in capture: |
| self.assertTrue(p.haslayer(IPFIX)) |
| if p.haslayer(Data): |
| nr_data += 1 |
| self.assertTrue(nr_templates, 1) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| |
| @unittest.skipUnless(config.extended, "part of extended tests") |
| class DisableFP(MethodHolder): |
| """Disable Flowprobe feature""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(DisableFP, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(DisableFP, cls).tearDownClass() |
| |
| def test_0001(self): |
| """disable flowprobe feature after first packets""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| ipfix = VppCFLOW(test=self) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| templates = ipfix.verify_templates(ipfix_decoder) |
| |
| self.create_stream() |
| self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| self.wait_for_cflow_packet(self.collector, templates[1]) |
| self.collector.get_capture(4) |
| |
| # disable IPFIX |
| ipfix.disable_flowprobe_feature() |
| self.pg_enable_capture([self.collector]) |
| |
| self.send_packets() |
| |
| # make sure no one packet arrived in active timer span |
| self.vapi.ipfix_flush() |
| self.sleep(1, "wait before verifying no packets sent") |
| self.collector.assert_nothing_captured() |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| def test_no_leftover_flows_after_disabling(self): |
| """disable flowprobe feature and expect no leftover flows""" |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| # enable ip4 datapath for an interface |
| # set active and passive timers |
| ipfix = VppCFLOW( |
| test=self, |
| active=3, |
| passive=4, |
| intf="pg3", |
| layer="l3", |
| datapath="ip4", |
| direction="rx", |
| mtu=100, |
| ) |
| ipfix.add_vpp_config() |
| |
| # template packet should arrive immediately |
| ipfix.verify_templates(count=1) |
| |
| # send some ip4 packets |
| self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=5) |
| self.send_packets(src_if=self.pg3, dst_if=self.pg4) |
| |
| # disable feature for the interface |
| # currently stored ip4 flows should be removed |
| ipfix.disable_flowprobe_feature() |
| |
| # no leftover ip4 flows are expected |
| self.pg_enable_capture([self.collector]) |
| self.sleep(12, "wait for leftover ip4 flows during three passive intervals") |
| self.collector.assert_nothing_captured() |
| |
| # cleanup |
| ipfix.disable_exporter() |
| |
| |
| @unittest.skipUnless(config.extended, "part of extended tests") |
| class ReenableFP(MethodHolder): |
| """Re-enable Flowprobe feature""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(ReenableFP, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(ReenableFP, cls).tearDownClass() |
| |
| def test_0001(self): |
| """disable flowprobe feature after first packets and re-enable |
| after few packets""" |
| self.logger.info("FFP_TEST_START_0001") |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pkts = [] |
| |
| ipfix = VppCFLOW(test=self) |
| ipfix.add_vpp_config() |
| |
| ipfix_decoder = IPFIXDecoder() |
| # template packet should arrive immediately |
| self.vapi.ipfix_flush() |
| templates = ipfix.verify_templates(ipfix_decoder, timeout=3) |
| |
| self.create_stream() |
| self.send_packets() |
| |
| # make sure the one packet we expect actually showed up |
| self.vapi.ipfix_flush() |
| self.wait_for_cflow_packet(self.collector, templates[1], 5) |
| self.collector.get_capture(4) |
| |
| # disable FPP feature |
| ipfix.disable_flowprobe_feature() |
| self.pg_enable_capture([self.collector]) |
| |
| self.send_packets() |
| |
| # make sure no one packet arrived in active timer span |
| self.vapi.ipfix_flush() |
| self.sleep(5, "wait before verifying no packets sent") |
| self.collector.assert_nothing_captured() |
| |
| # enable FPP feature |
| ipfix.enable_flowprobe_feature() |
| self.vapi.ipfix_flush() |
| templates = ipfix.verify_templates(ipfix_decoder, timeout=3) |
| |
| self.send_packets() |
| |
| # make sure the next packets (templates and data) we expect actually |
| # showed up |
| self.vapi.ipfix_flush() |
| self.wait_for_cflow_packet(self.collector, templates[1], 5) |
| self.collector.get_capture(4) |
| |
| ipfix.remove_vpp_config() |
| self.logger.info("FFP_TEST_FINISH_0001") |
| |
| |
| if __name__ == "__main__": |
| unittest.main(testRunner=VppTestRunner) |