test/test_l2_flood.py

#!/usr/bin/env python3

import unittest
import socket

from framework import VppTestCase, VppTestRunner
from vpp_ip_route import VppIpRoute, VppRoutePath
from vpp_l2 import L2_PORT_TYPE, BRIDGE_FLAGS

from scapy.packet import Raw
from scapy.layers.l2 import Ether
from scapy.layers.inet import IP, UDP

NUM_PKTS = 67


class TestL2Flood(VppTestCase):
    """L2-flood"""

    @classmethod
    def setUpClass(cls):
        super(TestL2Flood, cls).setUpClass()

    @classmethod
    def tearDownClass(cls):
        super(TestL2Flood, cls).tearDownClass()

    def setUp(self):
        super(TestL2Flood, self).setUp()

        # 12 l2 interface and one l3
        self.create_pg_interfaces(range(13))
        self.create_bvi_interfaces(1)

        for i in self.pg_interfaces:
            i.admin_up()
        for i in self.bvi_interfaces:
            i.admin_up()

        self.pg12.config_ip4()
        self.pg12.resolve_arp()
        self.bvi0.config_ip4()

    def tearDown(self):
        self.pg12.unconfig_ip4()
        self.bvi0.unconfig_ip4()

        for i in self.pg_interfaces:
            i.admin_down()
        for i in self.bvi_interfaces:
            i.admin_down()
        super(TestL2Flood, self).tearDown()

    def test_flood(self):
        """L2 Flood Tests"""

        #
        # Create a single bridge Domain
        #
        self.vapi.bridge_domain_add_del_v2(
            bd_id=1, is_add=1, flood=1, uu_flood=1, forward=1, learn=1
        )

        #
        # add each interface to the BD. 3 interfaces per split horizon group
        #
        for i in self.pg_interfaces[0:4]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=0
            )
        for i in self.pg_interfaces[4:8]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=1
            )
        for i in self.pg_interfaces[8:12]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=2
            )
        for i in self.bvi_interfaces:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=2, port_type=L2_PORT_TYPE.BVI
            )

        p = (
            Ether(dst="ff:ff:ff:ff:ff:ff", src="00:00:de:ad:be:ef")
            / IP(src="10.10.10.10", dst="1.1.1.1")
            / UDP(sport=1234, dport=1234)
            / Raw(b"\xa5" * 100)
        )

        #
        # input on pg0 expect copies on pg1->11
        # this is in SHG=0 so its flooded to all, expect the pg0 since that's
        # the ingress link
        #
        self.pg0.add_stream(p * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:12]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        #
        # input on pg4 (SHG=1) expect copies on pg0->3 (SHG=0)
        # and pg8->11 (SHG=2)
        #
        self.pg4.add_stream(p * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)
        for i in self.pg_interfaces[8:12]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)
        for i in self.pg_interfaces[4:8]:
            i.assert_nothing_captured(remark="Different SH group")

        #
        # An IP route so the packet that hits the BVI is sent out of pg12
        #
        ip_route = VppIpRoute(
            self,
            "1.1.1.1",
            32,
            [VppRoutePath(self.pg12.remote_ip4, self.pg12.sw_if_index)],
        )
        ip_route.add_vpp_config()

        self.logger.info(self.vapi.cli("sh bridge 1 detail"))

        #
        # input on pg0 expect copies on pg1->12
        # this is in SHG=0 so its flooded to all, expect the pg0 since that's
        # the ingress link
        #
        self.pg0.add_stream(p * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        #
        # input on pg4 (SHG=1) expect copies on pg0->3 (SHG=0)
        # and pg8->12 (SHG=2)
        #
        self.pg4.add_stream(p * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)
        for i in self.pg_interfaces[8:13]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)
        for i in self.pg_interfaces[4:8]:
            i.assert_nothing_captured(remark="Different SH group")

        #
        # cleanup
        #
        for i in self.pg_interfaces[:12]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, enable=0
            )
        for i in self.bvi_interfaces:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index,
                bd_id=1,
                shg=2,
                port_type=L2_PORT_TYPE.BVI,
                enable=0,
            )

        self.vapi.bridge_domain_add_del_v2(bd_id=1, is_add=0)

    def test_flood_one(self):
        """L2 no-Flood Test"""

        #
        # Create a single bridge Domain
        #
        self.vapi.bridge_domain_add_del_v2(
            bd_id=1, is_add=1, flood=1, uu_flood=1, forward=1, learn=1
        )

        #
        # add 2 interfaces to the BD. this means a flood goes to only
        # one member
        #
        for i in self.pg_interfaces[:2]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=0
            )

        p = (
            Ether(dst="ff:ff:ff:ff:ff:ff", src="00:00:de:ad:be:ef")
            / IP(src="10.10.10.10", dst="1.1.1.1")
            / UDP(sport=1234, dport=1234)
            / Raw(b"\xa5" * 100)
        )

        #
        # input on pg0 expect copies on pg1
        #
        self.send_and_expect(self.pg0, p * NUM_PKTS, self.pg1)

        #
        # cleanup
        #
        for i in self.pg_interfaces[:2]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, enable=0
            )
        self.vapi.bridge_domain_add_del_v2(bd_id=1, is_add=0)

    def test_uu_fwd(self):
        """UU Flood"""

        #
        # Create a single bridge Domain
        #
        self.vapi.bridge_domain_add_del_v2(
            bd_id=1, is_add=1, uu_flood=1, flood=1, forward=1, learn=1
        )

        #
        # add each interface to the BD. 3 interfaces per split horizon group
        #
        for i in self.pg_interfaces[0:4]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, shg=0
            )

        #
        # an unknown unicast and broadcast packets
        #
        p_uu = (
            Ether(dst="00:00:00:c1:5c:00", src="00:00:de:ad:be:ef")
            / IP(src="10.10.10.10", dst="1.1.1.1")
            / UDP(sport=1234, dport=1234)
            / Raw(b"\xa5" * 100)
        )
        p_bm = (
            Ether(dst="ff:ff:ff:ff:ff:ff", src="00:00:de:ad:be:ef")
            / IP(src="10.10.10.10", dst="1.1.1.1")
            / UDP(sport=1234, dport=1234)
            / Raw(b"\xa5" * 100)
        )

        #
        # input on pg0, expected copies on pg1->4
        #
        self.pg0.add_stream(p_uu * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        self.pg0.add_stream(p_bm * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        #
        # use pg8 as the uu-fwd interface
        #
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg8.sw_if_index,
            bd_id=1,
            shg=0,
            port_type=L2_PORT_TYPE.UU_FWD,
        )

        #
        # expect the UU packet on the uu-fwd interface and not be flooded
        #
        self.pg0.add_stream(p_uu * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        rx0 = self.pg8.get_capture(NUM_PKTS, timeout=1)

        for i in self.pg_interfaces[0:4]:
            i.assert_nothing_captured(remark="UU not flooded")

        self.pg0.add_stream(p_bm * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        #
        # remove the uu-fwd interface and expect UU to be flooded again
        #
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg8.sw_if_index,
            bd_id=1,
            shg=0,
            port_type=L2_PORT_TYPE.UU_FWD,
            enable=0,
        )

        self.pg0.add_stream(p_uu * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        for i in self.pg_interfaces[1:4]:
            rx0 = i.get_capture(NUM_PKTS, timeout=1)

        #
        # change the BD config to not support UU-flood
        #
        self.vapi.bridge_flags(bd_id=1, is_set=0, flags=BRIDGE_FLAGS.UU_FLOOD)

        self.send_and_assert_no_replies(self.pg0, p_uu)

        #
        # re-add the uu-fwd interface
        #
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg8.sw_if_index,
            bd_id=1,
            shg=0,
            port_type=L2_PORT_TYPE.UU_FWD,
        )
        self.logger.info(self.vapi.cli("sh bridge 1 detail"))

        self.pg0.add_stream(p_uu * NUM_PKTS)
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        rx0 = self.pg8.get_capture(NUM_PKTS, timeout=1)

        for i in self.pg_interfaces[0:4]:
            i.assert_nothing_captured(remark="UU not flooded")

        #
        # remove the uu-fwd interface
        #
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg8.sw_if_index,
            bd_id=1,
            shg=0,
            port_type=L2_PORT_TYPE.UU_FWD,
            enable=0,
        )
        self.send_and_assert_no_replies(self.pg0, p_uu)

        #
        # cleanup
        #
        for i in self.pg_interfaces[:4]:
            self.vapi.sw_interface_set_l2_bridge(
                rx_sw_if_index=i.sw_if_index, bd_id=1, enable=0
            )

        self.vapi.bridge_domain_add_del_v2(bd_id=1, is_add=0)


if __name__ == "__main__":
    unittest.main(testRunner=VppTestRunner)