blob: fa1337538c4dfeea49019852a29c48abf0992f13 [file] [log] [blame]
Damjan Marion81bb6fc2022-01-16 22:47:55 +01001/* SPDX-License-Identifier: Apache-2.0
2 * Copyright(c) 2022 Cisco Systems, Inc.
3 */
4#ifndef included_vnet_error_h
5#define included_vnet_error_h
6
7#include <stdarg.h>
8#include <vppinfra/types.h>
9#include <vppinfra/format.h>
10
11#define foreach_vnet_error \
12 _ (UNSPECIFIED, -1, "Unspecified Error") \
13 _ (INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index") \
14 _ (NO_SUCH_FIB, -3, "No such FIB / VRF") \
15 _ (NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF") \
16 _ (NO_SUCH_LABEL, -5, "No such label") \
17 _ (NO_SUCH_ENTRY, -6, "No such entry") \
18 _ (INVALID_VALUE, -7, "Invalid value") \
19 _ (INVALID_VALUE_2, -8, "Invalid value #2") \
20 _ (UNIMPLEMENTED, -9, "Unimplemented") \
21 _ (INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2") \
22 _ (SYSCALL_ERROR_1, -11, "System call error #1") \
23 _ (SYSCALL_ERROR_2, -12, "System call error #2") \
24 _ (SYSCALL_ERROR_3, -13, "System call error #3") \
25 _ (SYSCALL_ERROR_4, -14, "System call error #4") \
26 _ (SYSCALL_ERROR_5, -15, "System call error #5") \
27 _ (SYSCALL_ERROR_6, -16, "System call error #6") \
28 _ (SYSCALL_ERROR_7, -17, "System call error #7") \
29 _ (SYSCALL_ERROR_8, -18, "System call error #8") \
30 _ (SYSCALL_ERROR_9, -19, "System call error #9") \
31 _ (SYSCALL_ERROR_10, -20, "System call error #10") \
32 _ (FEATURE_DISABLED, -30, "Feature disabled by configuration") \
33 _ (INVALID_REGISTRATION, -31, "Invalid registration") \
34 _ (NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB") \
35 _ (UNKNOWN_DESTINATION, -51, "Unknown destination") \
36 _ (NO_PATHS_IN_ROUTE, -52, "No paths specified in route") \
37 _ (NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)") \
38 _ (NO_MATCHING_INTERFACE, -54, "No matching interface for probe") \
39 _ (INVALID_VLAN, -55, "Invalid VLAN") \
40 _ (VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists") \
41 _ (INVALID_SRC_ADDRESS, -57, "Invalid src address") \
42 _ (INVALID_DST_ADDRESS, -58, "Invalid dst address") \
43 _ (ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch") \
44 _ (ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \
45 _ (ADDRESS_NOT_DELETABLE, -61, "Address not deletable") \
46 _ (IP6_NOT_ENABLED, -62, "ip6 not enabled") \
47 _ (NO_SUCH_NODE, -63, "No such graph node") \
48 _ (NO_SUCH_NODE2, -64, "No such graph node #2") \
49 _ (NO_SUCH_TABLE, -65, "No such table") \
50 _ (NO_SUCH_TABLE2, -66, "No such table #2") \
51 _ (NO_SUCH_TABLE3, -67, "No such table #3") \
52 _ (SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists") \
53 _ (SUBIF_CREATE_FAILED, -69, "Subinterface creation failed") \
54 _ (INVALID_MEMORY_SIZE, -70, "Invalid memory size requested") \
55 _ (INVALID_INTERFACE, -71, "Invalid interface") \
56 _ (INVALID_VLAN_TAG_COUNT, -72, \
57 "Invalid number of tags for requested operation") \
58 _ (INVALID_ARGUMENT, -73, "Invalid argument") \
59 _ (UNEXPECTED_INTF_STATE, -74, "Unexpected interface state") \
60 _ (TUNNEL_EXIST, -75, "Tunnel already exists") \
61 _ (INVALID_DECAP_NEXT, -76, "Invalid decap-next") \
62 _ (RESPONSE_NOT_READY, -77, "Response not ready") \
63 _ (NOT_CONNECTED, -78, "Not connected to the data plane") \
64 _ (IF_ALREADY_EXISTS, -79, "Interface already exists") \
65 _ (BOND_SLAVE_NOT_ALLOWED, -80, \
66 "Operation not allowed on slave of BondEthernet") \
67 _ (VALUE_EXIST, -81, "Value already exists") \
68 _ (SAME_SRC_DST, -82, "Source and destination are the same") \
69 _ (IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, \
70 "IP6 multicast address required") \
71 _ (SR_POLICY_NAME_NOT_PRESENT, -84, "Segment routing policy name required") \
72 _ (NOT_RUNNING_AS_ROOT, -85, "Not running as root") \
73 _ (ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \
74 _ (UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \
75 _ (IP_PREFIX_INVALID, -88, "IP prefix invalid (masked bits set in address") \
76 _ (INVALID_WORKER, -89, "Invalid worker thread") \
77 _ (LISP_DISABLED, -90, "LISP is disabled") \
78 _ (CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found") \
79 _ (INVALID_EID_TYPE, -92, "Unsupported LISP EID type") \
80 _ (CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file") \
81 _ (INCORRECT_ADJACENCY_TYPE, -94, \
82 "Invalid adjacency type for this operation") \
83 _ (EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, \
84 "Operation would exceed configured capacity of ranges") \
85 _ (EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, \
86 "Operation would exceed capacity of number of ports") \
87 _ (INVALID_ADDRESS_FAMILY, -97, "Invalid address family") \
88 _ (INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index") \
89 _ (TABLE_TOO_BIG, -99, "Table too big") \
90 _ (CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \
91 _ (BFD_EEXIST, -101, "Duplicate BFD object") \
92 _ (BFD_ENOENT, -102, "No such BFD object") \
93 _ (BFD_EINUSE, -103, "BFD object in use") \
94 _ (BFD_NOTSUPP, -104, "BFD feature not supported") \
95 _ (ADDRESS_IN_USE, -105, "Address in use") \
96 _ (ADDRESS_NOT_IN_USE, -106, "Address not in use") \
97 _ (QUEUE_FULL, -107, "Queue full") \
98 _ (APP_UNSUPPORTED_CFG, -108, "Unsupported application config") \
99 _ (URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed") \
100 _ (LISP_RLOC_LOCAL, -110, "RLOC address is local") \
101 _ (BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time") \
102 _ (INVALID_GPE_MODE, -112, "Invalid GPE mode") \
103 _ (LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present") \
104 _ (ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface") \
105 _ (SESSION_CONNECT, -115, "Session failed to connect") \
106 _ (ENTRY_ALREADY_EXISTS, -116, "Entry already exists") \
107 _ (SVM_SEGMENT_CREATE_FAIL, -117, "Svm segment create fail") \
108 _ (APPLICATION_NOT_ATTACHED, -118, "Application not attached") \
109 _ (BD_ALREADY_EXISTS, -119, "Bridge domain already exists") \
110 _ (BD_IN_USE, -120, "Bridge domain has member interfaces") \
111 _ (BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \
112 _ (BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceeds 16M limit") \
113 _ (SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist") \
114 _ (L2_MACS_EVENT_CLINET_PRESENT, -124, \
115 "Client already exist for L2 MACs events") \
116 _ (INVALID_QUEUE, -125, "Invalid queue") \
117 _ (UNSUPPORTED, -126, "Unsupported") \
118 _ (DUPLICATE_IF_ADDRESS, -127, \
119 "Address already present on another interface") \
120 _ (APP_INVALID_NS, -128, "Invalid application namespace") \
121 _ (APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret") \
122 _ (APP_CONNECT_SCOPE, -130, "Connect scope") \
123 _ (APP_ALREADY_ATTACHED, -131, "App already attached") \
124 _ (SESSION_REDIRECT, -132, "Redirect failed") \
125 _ (ILLEGAL_NAME, -133, "Illegal name") \
126 _ (NO_NAME_SERVERS, -134, "No name servers configured") \
127 _ (NAME_SERVER_NOT_FOUND, -135, "Name server not found") \
128 _ (NAME_RESOLUTION_NOT_ENABLED, -136, "Name resolution not enabled") \
129 _ (NAME_SERVER_FORMAT_ERROR, -137, "Server format error (bug!)") \
130 _ (NAME_SERVER_NO_SUCH_NAME, -138, "No such name") \
131 _ (NAME_SERVER_NO_ADDRESSES, -139, "No addresses available") \
132 _ (NAME_SERVER_NEXT_SERVER, -140, "Retry with new server") \
133 _ (APP_CONNECT_FILTERED, -141, "Connect was filtered") \
134 _ (ACL_IN_USE_INBOUND, -142, "Inbound ACL in use") \
135 _ (ACL_IN_USE_OUTBOUND, -143, "Outbound ACL in use") \
136 _ (INIT_FAILED, -144, "Initialization Failed") \
137 _ (NETLINK_ERROR, -145, "Netlink error") \
138 _ (BIER_BSL_UNSUP, -146, "BIER bit-string-length unsupported") \
139 _ (INSTANCE_IN_USE, -147, "Instance in use") \
140 _ (INVALID_SESSION_ID, -148, "Session ID out of range") \
141 _ (ACL_IN_USE_BY_LOOKUP_CONTEXT, -149, "ACL in use by a lookup context") \
142 _ (INVALID_VALUE_3, -150, "Invalid value #3") \
143 _ (NON_ETHERNET, -151, "Interface is not an Ethernet interface") \
144 _ (BD_ALREADY_HAS_BVI, -152, "Bridge domain already has a BVI interface") \
145 _ (INVALID_PROTOCOL, -153, "Invalid Protocol") \
146 _ (INVALID_ALGORITHM, -154, "Invalid Algorithm") \
147 _ (RSRC_IN_USE, -155, "Resource In Use") \
148 _ (KEY_LENGTH, -156, "invalid Key Length") \
149 _ (FIB_PATH_UNSUPPORTED_NH_PROTO, -157, "Unsupported FIB Path protocol") \
150 _ (API_ENDIAN_FAILED, -159, "Endian mismatch detected") \
151 _ (NO_CHANGE, -160, "No change in table") \
152 _ (MISSING_CERT_KEY, -161, "Missing certifcate or key") \
153 _ (LIMIT_EXCEEDED, -162, "limit exceeded") \
154 _ (IKE_NO_PORT, -163, "port not managed by IKE") \
155 _ (UDP_PORT_TAKEN, -164, "UDP port already taken") \
156 _ (EAGAIN, -165, "Retry stream call with cursor") \
157 _ (INVALID_VALUE_4, -166, "Invalid value #4") \
158 _ (BUSY, -167, "Busy") \
Filip Varga36c7e7c2022-11-23 10:47:56 -0800159 _ (BUG, -168, "Bug") \
160 _ (FEATURE_ALREADY_DISABLED, -169, "Feature already disabled") \
Gavril Floriane7f34c92023-06-15 18:39:57 +0000161 _ (FEATURE_ALREADY_ENABLED, -170, "Feature already enabled") \
162 _ (INVALID_PREFIX_LENGTH, -171, "Invalid prefix length")
Damjan Marion81bb6fc2022-01-16 22:47:55 +0100163
164typedef enum
165{
166#define _(a, b, c) VNET_ERR_##a = (b),
167 foreach_vnet_error
168#undef _
169 VNET_N_ERROR,
170} vnet_error_t;
171
172clib_error_t __clib_warn_unused_result *vnet_error (vnet_error_t code,
173 char *fmt, ...);
174
175format_function_t format_vnet_api_errno;
176
177#endif