Francois Clad | 0928da9 | 2018-07-09 16:45:23 +0200 | [diff] [blame] | 1 | #!/usr/bin/env python |
| 2 | |
| 3 | import unittest |
| 4 | import binascii |
| 5 | from socket import AF_INET6 |
| 6 | |
| 7 | from framework import VppTestCase, VppTestRunner |
| 8 | from vpp_ip_route import VppIpRoute, VppRoutePath, DpoProto, VppIpTable |
| 9 | from vpp_srv6 import SRv6LocalSIDBehaviors, VppSRv6LocalSID, VppSRv6Policy, \ |
| 10 | SRv6PolicyType, VppSRv6Steering, SRv6PolicySteeringTypes |
| 11 | |
| 12 | from scapy.packet import Raw |
| 13 | from scapy.layers.l2 import Ether, Dot1Q |
| 14 | from scapy.layers.inet6 import IPv6, UDP, IPv6ExtHdrSegmentRouting |
| 15 | from scapy.layers.inet import IP, UDP |
| 16 | |
| 17 | from scapy.utils import inet_pton, inet_ntop |
| 18 | |
| 19 | from util import ppp |
| 20 | |
| 21 | |
| 22 | class TestSRv6(VppTestCase): |
| 23 | """ SRv6 Static Proxy plugin Test Case """ |
| 24 | |
| 25 | @classmethod |
| 26 | def setUpClass(self): |
| 27 | super(TestSRv6, self).setUpClass() |
| 28 | |
| 29 | def setUp(self): |
| 30 | """ Perform test setup before each test case. |
| 31 | """ |
| 32 | super(TestSRv6, self).setUp() |
| 33 | |
| 34 | # packet sizes, inclusive L2 overhead |
| 35 | self.pg_packet_sizes = [64, 512, 1518, 9018] |
| 36 | |
| 37 | # reset packet_infos |
| 38 | self.reset_packet_infos() |
| 39 | |
| 40 | def tearDown(self): |
| 41 | """ Clean up test setup after each test case. |
| 42 | """ |
| 43 | self.teardown_interfaces() |
| 44 | |
| 45 | super(TestSRv6, self).tearDown() |
| 46 | |
| 47 | def configure_interface(self, |
| 48 | interface, |
| 49 | ipv6=False, ipv4=False, |
| 50 | ipv6_table_id=0, ipv4_table_id=0): |
| 51 | """ Configure interface. |
| 52 | :param ipv6: configure IPv6 on interface |
| 53 | :param ipv4: configure IPv4 on interface |
| 54 | :param ipv6_table_id: FIB table_id for IPv6 |
| 55 | :param ipv4_table_id: FIB table_id for IPv4 |
| 56 | """ |
| 57 | self.logger.debug("Configuring interface %s" % (interface.name)) |
| 58 | if ipv6: |
| 59 | self.logger.debug("Configuring IPv6") |
| 60 | interface.set_table_ip6(ipv6_table_id) |
| 61 | interface.config_ip6() |
| 62 | interface.resolve_ndp(timeout=5) |
| 63 | if ipv4: |
| 64 | self.logger.debug("Configuring IPv4") |
| 65 | interface.set_table_ip4(ipv4_table_id) |
| 66 | interface.config_ip4() |
| 67 | interface.resolve_arp() |
| 68 | interface.admin_up() |
| 69 | |
| 70 | def setup_interfaces(self, ipv6=[], ipv4=[], |
| 71 | ipv6_table_id=[], ipv4_table_id=[]): |
| 72 | """ Create and configure interfaces. |
| 73 | |
| 74 | :param ipv6: list of interface IPv6 capabilities |
| 75 | :param ipv4: list of interface IPv4 capabilities |
| 76 | :param ipv6_table_id: list of intf IPv6 FIB table_ids |
| 77 | :param ipv4_table_id: list of intf IPv4 FIB table_ids |
| 78 | :returns: List of created interfaces. |
| 79 | """ |
| 80 | # how many interfaces? |
| 81 | if len(ipv6): |
| 82 | count = len(ipv6) |
| 83 | else: |
| 84 | count = len(ipv4) |
| 85 | self.logger.debug("Creating and configuring %d interfaces" % (count)) |
| 86 | |
| 87 | # fill up ipv6 and ipv4 lists if needed |
| 88 | # not enabled (False) is the default |
| 89 | if len(ipv6) < count: |
| 90 | ipv6 += (count - len(ipv6)) * [False] |
| 91 | if len(ipv4) < count: |
| 92 | ipv4 += (count - len(ipv4)) * [False] |
| 93 | |
| 94 | # fill up table_id lists if needed |
| 95 | # table_id 0 (global) is the default |
| 96 | if len(ipv6_table_id) < count: |
| 97 | ipv6_table_id += (count - len(ipv6_table_id)) * [0] |
| 98 | if len(ipv4_table_id) < count: |
| 99 | ipv4_table_id += (count - len(ipv4_table_id)) * [0] |
| 100 | |
| 101 | # create 'count' pg interfaces |
| 102 | self.create_pg_interfaces(range(count)) |
| 103 | |
| 104 | # setup all interfaces |
| 105 | for i in range(count): |
| 106 | intf = self.pg_interfaces[i] |
| 107 | self.configure_interface(intf, |
| 108 | ipv6[i], ipv4[i], |
| 109 | ipv6_table_id[i], ipv4_table_id[i]) |
| 110 | |
| 111 | if any(ipv6): |
| 112 | self.logger.debug(self.vapi.cli("show ip6 neighbors")) |
| 113 | if any(ipv4): |
| 114 | self.logger.debug(self.vapi.cli("show ip arp")) |
| 115 | self.logger.debug(self.vapi.cli("show interface")) |
| 116 | self.logger.debug(self.vapi.cli("show hardware")) |
| 117 | |
| 118 | return self.pg_interfaces |
| 119 | |
| 120 | def teardown_interfaces(self): |
| 121 | """ Unconfigure and bring down interface. |
| 122 | """ |
| 123 | self.logger.debug("Tearing down interfaces") |
| 124 | # tear down all interfaces |
| 125 | # AFAIK they cannot be deleted |
| 126 | for i in self.pg_interfaces: |
| 127 | self.logger.debug("Tear down interface %s" % (i.name)) |
| 128 | i.admin_down() |
| 129 | i.unconfig() |
| 130 | i.set_table_ip4(0) |
| 131 | i.set_table_ip6(0) |
| 132 | |
| 133 | def test_SRv6_End_AS_IPv6_noSRH(self): |
| 134 | """ Test SRv6 End.AS behavior with IPv6 traffic and no SRH rewrite. |
| 135 | """ |
| 136 | self.run_SRv6_End_AS_IPv6( |
| 137 | sid_list=['a1::', 'a2::a6', 'a3::'], |
| 138 | test_sid_index=1, |
| 139 | rewrite_src_addr='a2::') |
| 140 | |
| 141 | def test_SRv6_End_AS_IPv6_SRH(self): |
| 142 | """ Test SRv6 End.AS behavior with IPv6 traffic and SRH rewrite. |
| 143 | """ |
| 144 | self.run_SRv6_End_AS_IPv6( |
| 145 | sid_list=['a1::a6', 'a2::', 'a3::'], |
| 146 | test_sid_index=0, |
| 147 | rewrite_src_addr='a1::') |
| 148 | |
| 149 | def test_SRv6_End_AS_IPv4_noSRH(self): |
| 150 | """ Test SRv6 End.AS behavior with IPv4 traffic and no SRH rewrite. |
| 151 | """ |
| 152 | self.run_SRv6_End_AS_IPv4( |
| 153 | sid_list=['a1::', 'a2::a6', 'a3::'], |
| 154 | test_sid_index=1, |
| 155 | rewrite_src_addr='a2::') |
| 156 | |
| 157 | def test_SRv6_End_AS_IPv4_SRH(self): |
| 158 | """ Test SRv6 End.AS behavior with IPv4 traffic and SRH rewrite. |
| 159 | """ |
| 160 | self.run_SRv6_End_AS_IPv4( |
| 161 | sid_list=['a1::a6', 'a2::', 'a3::'], |
| 162 | test_sid_index=0, |
| 163 | rewrite_src_addr='a1::') |
| 164 | |
Francois Clad | b02f3b7 | 2018-07-04 11:47:21 +0200 | [diff] [blame] | 165 | def test_SRv6_End_AS_L2_noSRH(self): |
| 166 | """ Test SRv6 End.AS behavior with L2 traffic and no SRH rewrite. |
| 167 | """ |
| 168 | self.run_SRv6_End_AS_L2( |
| 169 | sid_list=['a1::', 'a2::a6', 'a3::'], |
| 170 | test_sid_index=1, |
| 171 | rewrite_src_addr='a2::') |
| 172 | |
| 173 | def test_SRv6_End_AS_L2_SRH(self): |
| 174 | """ Test SRv6 End.AS behavior with L2 traffic and SRH rewrite. |
| 175 | """ |
| 176 | self.run_SRv6_End_AS_L2( |
| 177 | sid_list=['a1::a6', 'a2::', 'a3::'], |
| 178 | test_sid_index=0, |
| 179 | rewrite_src_addr='a1::') |
| 180 | |
| 181 | def run_SRv6_End_AS_L2(self, sid_list, test_sid_index, rewrite_src_addr): |
| 182 | """ Run SRv6 End.AS test with L2 traffic. |
| 183 | """ |
| 184 | self.rewrite_src_addr = rewrite_src_addr |
| 185 | self.rewrite_sid_list = sid_list[test_sid_index + 1::] |
| 186 | |
| 187 | # send traffic to one destination interface |
| 188 | # source and destination interfaces are IPv6 only |
| 189 | self.setup_interfaces(ipv6=[True, False]) |
| 190 | |
| 191 | # configure route to next segment |
| 192 | route = VppIpRoute(self, sid_list[test_sid_index + 1], 128, |
| 193 | [VppRoutePath(self.pg0.remote_ip6, |
| 194 | self.pg0.sw_if_index, |
| 195 | proto=DpoProto.DPO_PROTO_IP6)], |
| 196 | is_ip6=1) |
| 197 | route.add_vpp_config() |
| 198 | |
| 199 | # configure SRv6 localSID behavior |
| 200 | cli_str = "sr localsid address " + sid_list[test_sid_index] \ |
| 201 | + " behavior end.as" \ |
| 202 | + " oif " + self.pg1.name \ |
| 203 | + " iif " + self.pg1.name \ |
| 204 | + " src " + self.rewrite_src_addr |
| 205 | for s in self.rewrite_sid_list: |
| 206 | cli_str += " next " + s |
| 207 | self.vapi.cli(cli_str) |
| 208 | |
| 209 | # log the localsids |
| 210 | self.logger.debug(self.vapi.cli("show sr localsid")) |
| 211 | |
| 212 | # send one packet per packet size |
| 213 | count = len(self.pg_packet_sizes) |
| 214 | |
| 215 | # prepare L2 in SRv6 headers |
| 216 | packet_header1 = self.create_packet_header_IPv6_SRH_L2( |
| 217 | sidlist=sid_list[::-1], |
| 218 | segleft=len(sid_list) - test_sid_index - 1, |
| 219 | vlan=0) |
| 220 | |
| 221 | # generate packets (pg0->pg1) |
| 222 | pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, |
| 223 | self.pg_packet_sizes, count) |
| 224 | |
| 225 | # send packets and verify received packets |
| 226 | self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, |
| 227 | self.compare_rx_tx_packet_End_AS_L2_out) |
| 228 | |
| 229 | # log the localsid counters |
| 230 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 231 | |
| 232 | # prepare L2 header for returning packets |
| 233 | packet_header2 = self.create_packet_header_L2() |
| 234 | |
| 235 | # generate returning packets (pg1->pg0) |
| 236 | pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, |
| 237 | self.pg_packet_sizes, count) |
| 238 | |
| 239 | # send packets and verify received packets |
| 240 | self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, |
| 241 | self.compare_rx_tx_packet_End_AS_L2_in) |
| 242 | |
| 243 | # log the localsid counters |
| 244 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 245 | |
| 246 | # remove SRv6 localSIDs |
| 247 | self.vapi.cli("sr localsid del address " + sid_list[test_sid_index]) |
| 248 | |
| 249 | # cleanup interfaces |
| 250 | self.teardown_interfaces() |
| 251 | |
Francois Clad | 0928da9 | 2018-07-09 16:45:23 +0200 | [diff] [blame] | 252 | def run_SRv6_End_AS_IPv6(self, sid_list, test_sid_index, rewrite_src_addr): |
| 253 | """ Run SRv6 End.AS test with IPv6 traffic. |
| 254 | """ |
| 255 | self.rewrite_src_addr = rewrite_src_addr |
| 256 | self.rewrite_sid_list = sid_list[test_sid_index + 1::] |
| 257 | |
| 258 | # send traffic to one destination interface |
| 259 | # source and destination interfaces are IPv6 only |
| 260 | self.setup_interfaces(ipv6=[True, True]) |
| 261 | |
| 262 | # configure route to next segment |
| 263 | route = VppIpRoute(self, sid_list[test_sid_index + 1], 128, |
| 264 | [VppRoutePath(self.pg0.remote_ip6, |
| 265 | self.pg0.sw_if_index, |
| 266 | proto=DpoProto.DPO_PROTO_IP6)], |
| 267 | is_ip6=1) |
| 268 | route.add_vpp_config() |
| 269 | |
| 270 | # configure SRv6 localSID behavior |
| 271 | cli_str = "sr localsid address " + sid_list[test_sid_index] \ |
| 272 | + " behavior end.as" \ |
| 273 | + " nh " + self.pg1.remote_ip6 \ |
| 274 | + " oif " + self.pg1.name \ |
| 275 | + " iif " + self.pg1.name \ |
| 276 | + " src " + self.rewrite_src_addr |
| 277 | for s in self.rewrite_sid_list: |
| 278 | cli_str += " next " + s |
| 279 | self.vapi.cli(cli_str) |
| 280 | |
| 281 | # log the localsids |
| 282 | self.logger.debug(self.vapi.cli("show sr localsid")) |
| 283 | |
| 284 | # send one packet per packet size |
| 285 | count = len(self.pg_packet_sizes) |
| 286 | |
| 287 | # prepare IPv6 in SRv6 headers |
| 288 | packet_header1 = self.create_packet_header_IPv6_SRH_IPv6( |
| 289 | sidlist=sid_list[::-1], |
| 290 | segleft=len(sid_list) - test_sid_index - 1) |
| 291 | |
| 292 | # generate packets (pg0->pg1) |
| 293 | pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, |
| 294 | self.pg_packet_sizes, count) |
| 295 | |
| 296 | # send packets and verify received packets |
| 297 | self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, |
| 298 | self.compare_rx_tx_packet_End_AS_IPv6_out) |
| 299 | |
| 300 | # log the localsid counters |
| 301 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 302 | |
| 303 | # prepare IPv6 header for returning packets |
| 304 | packet_header2 = self.create_packet_header_IPv6() |
| 305 | |
| 306 | # generate returning packets (pg1->pg0) |
| 307 | pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, |
| 308 | self.pg_packet_sizes, count) |
| 309 | |
| 310 | # send packets and verify received packets |
| 311 | self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, |
| 312 | self.compare_rx_tx_packet_End_AS_IPv6_in) |
| 313 | |
| 314 | # log the localsid counters |
| 315 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 316 | |
| 317 | # remove SRv6 localSIDs |
| 318 | self.vapi.cli("sr localsid del address " + sid_list[test_sid_index]) |
| 319 | |
| 320 | # cleanup interfaces |
| 321 | self.teardown_interfaces() |
| 322 | |
| 323 | def run_SRv6_End_AS_IPv4(self, sid_list, test_sid_index, rewrite_src_addr): |
| 324 | """ Run SRv6 End.AS test with IPv4 traffic. |
| 325 | """ |
| 326 | self.rewrite_src_addr = rewrite_src_addr |
| 327 | self.rewrite_sid_list = sid_list[test_sid_index + 1::] |
| 328 | |
| 329 | # send traffic to one destination interface |
| 330 | # source and destination interfaces are IPv6 only |
| 331 | self.setup_interfaces(ipv6=[True, False], ipv4=[True, True]) |
| 332 | |
| 333 | # configure route to next segment |
| 334 | route = VppIpRoute(self, sid_list[test_sid_index + 1], 128, |
| 335 | [VppRoutePath(self.pg0.remote_ip6, |
| 336 | self.pg0.sw_if_index, |
| 337 | proto=DpoProto.DPO_PROTO_IP6)], |
| 338 | is_ip6=1) |
| 339 | route.add_vpp_config() |
| 340 | |
| 341 | # configure SRv6 localSID behavior |
| 342 | cli_str = "sr localsid address " + sid_list[test_sid_index] \ |
| 343 | + " behavior end.as" \ |
| 344 | + " nh " + self.pg1.remote_ip4 \ |
| 345 | + " oif " + self.pg1.name \ |
| 346 | + " iif " + self.pg1.name \ |
| 347 | + " src " + self.rewrite_src_addr |
| 348 | for s in self.rewrite_sid_list: |
| 349 | cli_str += " next " + s |
| 350 | self.vapi.cli(cli_str) |
| 351 | |
| 352 | # log the localsids |
| 353 | self.logger.debug(self.vapi.cli("show sr localsid")) |
| 354 | |
| 355 | # send one packet per packet size |
| 356 | count = len(self.pg_packet_sizes) |
| 357 | |
| 358 | # prepare IPv4 in SRv6 headers |
| 359 | packet_header1 = self.create_packet_header_IPv6_SRH_IPv4( |
| 360 | sidlist=sid_list[::-1], |
| 361 | segleft=len(sid_list) - test_sid_index - 1) |
| 362 | |
| 363 | # generate packets (pg0->pg1) |
| 364 | pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, |
| 365 | self.pg_packet_sizes, count) |
| 366 | |
| 367 | # send packets and verify received packets |
| 368 | self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, |
| 369 | self.compare_rx_tx_packet_End_AS_IPv4_out) |
| 370 | |
| 371 | # log the localsid counters |
| 372 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 373 | |
| 374 | # prepare IPv6 header for returning packets |
| 375 | packet_header2 = self.create_packet_header_IPv4() |
| 376 | |
| 377 | # generate returning packets (pg1->pg0) |
| 378 | pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, |
| 379 | self.pg_packet_sizes, count) |
| 380 | |
| 381 | # send packets and verify received packets |
| 382 | self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, |
| 383 | self.compare_rx_tx_packet_End_AS_IPv4_in) |
| 384 | |
| 385 | # log the localsid counters |
| 386 | self.logger.info(self.vapi.cli("show sr localsid")) |
| 387 | |
| 388 | # remove SRv6 localSIDs |
| 389 | self.vapi.cli("sr localsid del address " + sid_list[test_sid_index]) |
| 390 | |
| 391 | # cleanup interfaces |
| 392 | self.teardown_interfaces() |
| 393 | |
| 394 | def compare_rx_tx_packet_End_AS_IPv6_in(self, tx_pkt, rx_pkt): |
| 395 | """ Compare input and output packet after passing End.AS |
| 396 | |
| 397 | :param tx_pkt: transmitted packet |
| 398 | :param rx_pkt: received packet |
| 399 | """ |
| 400 | |
| 401 | # get first (outer) IPv6 header of rx'ed packet |
| 402 | rx_ip = rx_pkt.getlayer(IPv6) |
| 403 | rx_srh = None |
| 404 | |
| 405 | tx_ip = tx_pkt.getlayer(IPv6) |
| 406 | |
| 407 | # expected segment-list (SRH order) |
| 408 | tx_seglist = self.rewrite_sid_list[::-1] |
| 409 | |
| 410 | # received ip.src should be equal to SR Policy source |
| 411 | self.assertEqual(rx_ip.src, self.rewrite_src_addr) |
| 412 | # received ip.dst should be equal to expected sidlist[lastentry] |
| 413 | self.assertEqual(rx_ip.dst, tx_seglist[-1]) |
| 414 | |
| 415 | if len(tx_seglist) > 1: |
| 416 | # rx'ed packet should have SRH |
| 417 | self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 418 | # get SRH |
| 419 | rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting) |
| 420 | # rx'ed seglist should be equal to expected seglist |
| 421 | self.assertEqual(rx_srh.addresses, tx_seglist) |
| 422 | # segleft should be equal to size expected seglist-1 |
| 423 | self.assertEqual(rx_srh.segleft, len(tx_seglist)-1) |
| 424 | # segleft should be equal to lastentry |
| 425 | self.assertEqual(rx_srh.segleft, rx_srh.lastentry) |
| 426 | # get payload |
| 427 | payload = rx_srh.payload |
| 428 | else: |
| 429 | # rx'ed packet should NOT have SRH |
| 430 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 431 | # get payload |
| 432 | payload = rx_ip.payload |
| 433 | |
| 434 | # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt |
| 435 | # except for the hop-limit field |
| 436 | # -> update tx'ed hlim to the expected hlim |
| 437 | tx_ip.hlim = tx_ip.hlim - 1 |
| 438 | |
| 439 | self.assertEqual(payload, tx_ip) |
| 440 | |
| 441 | self.logger.debug("packet verification: SUCCESS") |
| 442 | |
| 443 | def compare_rx_tx_packet_End_AS_IPv4_in(self, tx_pkt, rx_pkt): |
| 444 | """ Compare input and output packet after passing End.AS |
| 445 | |
| 446 | :param tx_pkt: transmitted packet |
| 447 | :param rx_pkt: received packet |
| 448 | """ |
| 449 | |
| 450 | # get first (outer) IPv6 header of rx'ed packet |
| 451 | rx_ip = rx_pkt.getlayer(IPv6) |
| 452 | rx_srh = None |
| 453 | |
| 454 | tx_ip = tx_pkt.getlayer(IP) |
| 455 | |
| 456 | # expected segment-list (SRH order) |
| 457 | tx_seglist = self.rewrite_sid_list[::-1] |
| 458 | |
| 459 | # received ip.src should be equal to SR Policy source |
| 460 | self.assertEqual(rx_ip.src, self.rewrite_src_addr) |
| 461 | # received ip.dst should be equal to expected sidlist[lastentry] |
| 462 | self.assertEqual(rx_ip.dst, tx_seglist[-1]) |
| 463 | |
| 464 | if len(tx_seglist) > 1: |
| 465 | # rx'ed packet should have SRH and IPv4 header |
| 466 | self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 467 | self.assertTrue(rx_ip.payload.haslayer(IP)) |
| 468 | # get SRH |
| 469 | rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting) |
| 470 | # rx'ed seglist should be equal to seglist |
| 471 | self.assertEqual(rx_srh.addresses, tx_seglist) |
| 472 | # segleft should be equal to size seglist-1 |
| 473 | self.assertEqual(rx_srh.segleft, len(tx_seglist)-1) |
| 474 | # segleft should be equal to lastentry |
| 475 | self.assertEqual(rx_srh.segleft, rx_srh.lastentry) |
| 476 | payload = rx_srh.payload |
| 477 | else: |
| 478 | # rx'ed packet should NOT have SRH |
| 479 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 480 | # get payload |
| 481 | payload = rx_ip.payload |
| 482 | |
| 483 | # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt |
| 484 | # except for the ttl field and ip checksum |
| 485 | # -> adjust tx'ed ttl to expected ttl |
| 486 | tx_ip.ttl = tx_ip.ttl - 1 |
| 487 | # -> set tx'ed ip checksum to None and let scapy recompute |
| 488 | tx_ip.chksum = None |
| 489 | # read back the pkt (with str()) to force computing these fields |
| 490 | # probably other ways to accomplish this are possible |
| 491 | tx_ip = IP(str(tx_ip)) |
| 492 | |
| 493 | self.assertEqual(payload, tx_ip) |
| 494 | |
| 495 | self.logger.debug("packet verification: SUCCESS") |
| 496 | |
Francois Clad | b02f3b7 | 2018-07-04 11:47:21 +0200 | [diff] [blame] | 497 | def compare_rx_tx_packet_End_AS_L2_in(self, tx_pkt, rx_pkt): |
| 498 | """ Compare input and output packet after passing End.AS |
| 499 | |
| 500 | :param tx_pkt: transmitted packet |
| 501 | :param rx_pkt: received packet |
| 502 | """ |
| 503 | |
| 504 | # get first (outer) IPv6 header of rx'ed packet |
| 505 | rx_ip = rx_pkt.getlayer(IPv6) |
| 506 | rx_srh = None |
| 507 | |
| 508 | tx_ether = tx_pkt.getlayer(Ether) |
| 509 | |
| 510 | # expected segment-list (SRH order) |
| 511 | tx_seglist = self.rewrite_sid_list[::-1] |
| 512 | |
| 513 | # received ip.src should be equal to SR Policy source |
| 514 | self.assertEqual(rx_ip.src, self.rewrite_src_addr) |
| 515 | # received ip.dst should be equal to expected sidlist[lastentry] |
| 516 | self.assertEqual(rx_ip.dst, tx_seglist[-1]) |
| 517 | |
| 518 | if len(tx_seglist) > 1: |
| 519 | # rx'ed packet should have SRH |
| 520 | self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 521 | # get SRH |
| 522 | rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting) |
| 523 | # rx'ed seglist should be equal to seglist |
| 524 | self.assertEqual(rx_srh.addresses, tx_seglist) |
| 525 | # segleft should be equal to size seglist-1 |
| 526 | self.assertEqual(rx_srh.segleft, len(tx_seglist)-1) |
| 527 | # segleft should be equal to lastentry |
| 528 | self.assertEqual(rx_srh.segleft, rx_srh.lastentry) |
| 529 | # nh should be "No Next Header" (59) |
| 530 | self.assertEqual(rx_srh.nh, 59) |
| 531 | # get payload |
| 532 | payload = rx_srh.payload |
| 533 | else: |
| 534 | # rx'ed packet should NOT have SRH |
| 535 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 536 | # get payload |
| 537 | payload = rx_ip.payload |
| 538 | |
| 539 | # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt |
| 540 | self.assertEqual(Ether(str(payload)), tx_ether) |
| 541 | |
| 542 | self.logger.debug("packet verification: SUCCESS") |
| 543 | |
Francois Clad | 0928da9 | 2018-07-09 16:45:23 +0200 | [diff] [blame] | 544 | def compare_rx_tx_packet_End_AS_IPv6_out(self, tx_pkt, rx_pkt): |
| 545 | """ Compare input and output packet after passing End.AS with IPv6 |
| 546 | |
| 547 | :param tx_pkt: transmitted packet |
| 548 | :param rx_pkt: received packet |
| 549 | """ |
| 550 | |
| 551 | # get first (outer) IPv6 header of rx'ed packet |
| 552 | rx_ip = rx_pkt.getlayer(IPv6) |
| 553 | |
| 554 | tx_ip = tx_pkt.getlayer(IPv6) |
| 555 | tx_ip2 = tx_pkt.getlayer(IPv6, 2) |
| 556 | |
| 557 | # verify if rx'ed packet has no SRH |
| 558 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 559 | |
| 560 | # the whole rx_ip pkt should be equal to tx_ip2 |
| 561 | # except for the hlim field |
| 562 | # -> adjust tx'ed hlim to expected hlim |
| 563 | tx_ip2.hlim = tx_ip2.hlim - 1 |
| 564 | |
| 565 | self.assertEqual(rx_ip, tx_ip2) |
| 566 | |
| 567 | self.logger.debug("packet verification: SUCCESS") |
| 568 | |
| 569 | def compare_rx_tx_packet_End_AS_IPv4_out(self, tx_pkt, rx_pkt): |
| 570 | """ Compare input and output packet after passing End.AS with IPv4 |
| 571 | |
| 572 | :param tx_pkt: transmitted packet |
| 573 | :param rx_pkt: received packet |
| 574 | """ |
| 575 | |
| 576 | # get IPv4 header of rx'ed packet |
| 577 | rx_ip = rx_pkt.getlayer(IP) |
| 578 | |
| 579 | tx_ip = tx_pkt.getlayer(IPv6) |
| 580 | tx_ip2 = tx_pkt.getlayer(IP) |
| 581 | |
| 582 | # verify if rx'ed packet has no SRH |
| 583 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 584 | |
| 585 | # the whole rx_ip pkt should be equal to tx_ip2 |
| 586 | # except for the ttl field and ip checksum |
| 587 | # -> adjust tx'ed ttl to expected ttl |
| 588 | tx_ip2.ttl = tx_ip2.ttl - 1 |
| 589 | # -> set tx'ed ip checksum to None and let scapy recompute |
| 590 | tx_ip2.chksum = None |
| 591 | # read back the pkt (with str()) to force computing these fields |
| 592 | # probably other ways to accomplish this are possible |
| 593 | tx_ip2 = IP(str(tx_ip2)) |
| 594 | |
| 595 | self.assertEqual(rx_ip, tx_ip2) |
| 596 | |
| 597 | self.logger.debug("packet verification: SUCCESS") |
| 598 | |
Francois Clad | b02f3b7 | 2018-07-04 11:47:21 +0200 | [diff] [blame] | 599 | def compare_rx_tx_packet_End_AS_L2_out(self, tx_pkt, rx_pkt): |
| 600 | """ Compare input and output packet after passing End.AS with L2 |
| 601 | |
| 602 | :param tx_pkt: transmitted packet |
| 603 | :param rx_pkt: received packet |
| 604 | """ |
| 605 | |
| 606 | # get IPv4 header of rx'ed packet |
| 607 | rx_eth = rx_pkt.getlayer(Ether) |
| 608 | |
| 609 | tx_ip = tx_pkt.getlayer(IPv6) |
| 610 | # we can't just get the 2nd Ether layer |
| 611 | # get the Raw content and dissect it as Ether |
| 612 | tx_eth1 = Ether(str(tx_pkt[Raw])) |
| 613 | |
| 614 | # verify if rx'ed packet has no SRH |
| 615 | self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting)) |
| 616 | |
| 617 | # the whole rx_eth pkt should be equal to tx_eth1 |
| 618 | self.assertEqual(rx_eth, tx_eth1) |
| 619 | |
| 620 | self.logger.debug("packet verification: SUCCESS") |
| 621 | |
Francois Clad | 0928da9 | 2018-07-09 16:45:23 +0200 | [diff] [blame] | 622 | def create_stream(self, src_if, dst_if, packet_header, packet_sizes, |
| 623 | count): |
| 624 | """Create SRv6 input packet stream for defined interface. |
| 625 | |
| 626 | :param VppInterface src_if: Interface to create packet stream for |
| 627 | :param VppInterface dst_if: destination interface of packet stream |
| 628 | :param packet_header: Layer3 scapy packet headers, |
| 629 | L2 is added when not provided, |
| 630 | Raw(payload) with packet_info is added |
| 631 | :param list packet_sizes: packet stream pckt sizes,sequentially applied |
| 632 | to packets in stream have |
| 633 | :param int count: number of packets in packet stream |
| 634 | :return: list of packets |
| 635 | """ |
| 636 | self.logger.info("Creating packets") |
| 637 | pkts = [] |
| 638 | for i in range(0, count-1): |
| 639 | payload_info = self.create_packet_info(src_if, dst_if) |
| 640 | self.logger.debug( |
| 641 | "Creating packet with index %d" % (payload_info.index)) |
| 642 | payload = self.info_to_payload(payload_info) |
| 643 | # add L2 header if not yet provided in packet_header |
| 644 | if packet_header.getlayer(0).name == 'Ethernet': |
| 645 | p = (packet_header / |
| 646 | Raw(payload)) |
| 647 | else: |
| 648 | p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| 649 | packet_header / |
| 650 | Raw(payload)) |
| 651 | size = packet_sizes[i % len(packet_sizes)] |
| 652 | self.logger.debug("Packet size %d" % (size)) |
| 653 | self.extend_packet(p, size) |
| 654 | # we need to store the packet with the automatic fields computed |
| 655 | # read back the dumped packet (with str()) |
| 656 | # to force computing these fields |
| 657 | # probably other ways are possible |
| 658 | p = Ether(str(p)) |
| 659 | payload_info.data = p.copy() |
| 660 | self.logger.debug(ppp("Created packet:", p)) |
| 661 | pkts.append(p) |
| 662 | self.logger.info("Done creating packets") |
| 663 | return pkts |
| 664 | |
| 665 | def send_and_verify_pkts(self, input, pkts, output, compare_func): |
| 666 | """Send packets and verify received packets using compare_func |
| 667 | |
| 668 | :param input: ingress interface of DUT |
| 669 | :param pkts: list of packets to transmit |
| 670 | :param output: egress interface of DUT |
| 671 | :param compare_func: function to compare in and out packets |
| 672 | """ |
| 673 | # add traffic stream to input interface |
| 674 | input.add_stream(pkts) |
| 675 | |
| 676 | # enable capture on all interfaces |
| 677 | self.pg_enable_capture(self.pg_interfaces) |
| 678 | |
| 679 | # start traffic |
| 680 | self.logger.info("Starting traffic") |
| 681 | self.pg_start() |
| 682 | |
| 683 | # get output capture |
| 684 | self.logger.info("Getting packet capture") |
| 685 | capture = output.get_capture() |
| 686 | |
| 687 | # assert nothing was captured on input interface |
| 688 | # input.assert_nothing_captured() |
| 689 | |
| 690 | # verify captured packets |
| 691 | self.verify_captured_pkts(output, capture, compare_func) |
| 692 | |
| 693 | def create_packet_header_IPv6(self): |
| 694 | """Create packet header: IPv6 header, UDP header |
| 695 | |
| 696 | :param dst: IPv6 destination address |
| 697 | |
| 698 | IPv6 source address is 1234::1 |
| 699 | IPv6 destination address is 4321::1 |
| 700 | UDP source port and destination port are 1234 |
| 701 | """ |
| 702 | |
| 703 | p = (IPv6(src='1234::1', dst='4321::1') / |
| 704 | UDP(sport=1234, dport=1234)) |
| 705 | return p |
| 706 | |
| 707 | def create_packet_header_IPv6_SRH_IPv6(self, sidlist, segleft): |
| 708 | """Create packet header: IPv6 encapsulated in SRv6: |
| 709 | IPv6 header with SRH, IPv6 header, UDP header |
| 710 | |
| 711 | :param list sidlist: segment list of outer IPv6 SRH |
| 712 | :param int segleft: segments-left field of outer IPv6 SRH |
| 713 | |
| 714 | Outer IPv6 source address is set to 5678::1 |
| 715 | Outer IPv6 destination address is set to sidlist[segleft] |
| 716 | IPv6 source addresses is 1234::1 |
| 717 | IPv6 destination address is 4321::1 |
| 718 | UDP source port and destination port are 1234 |
| 719 | """ |
| 720 | |
| 721 | p = (IPv6(src='5678::1', dst=sidlist[segleft]) / |
| 722 | IPv6ExtHdrSegmentRouting(addresses=sidlist, |
| 723 | segleft=segleft, nh=41) / |
| 724 | IPv6(src='1234::1', dst='4321::1') / |
| 725 | UDP(sport=1234, dport=1234)) |
| 726 | return p |
| 727 | |
| 728 | def create_packet_header_IPv4(self): |
| 729 | """Create packet header: IPv4 header, UDP header |
| 730 | |
| 731 | :param dst: IPv4 destination address |
| 732 | |
| 733 | IPv4 source address is 123.1.1.1 |
| 734 | IPv4 destination address is 124.1.1.1 |
| 735 | UDP source port and destination port are 1234 |
| 736 | """ |
| 737 | |
| 738 | p = (IP(src='123.1.1.1', dst='124.1.1.1') / |
| 739 | UDP(sport=1234, dport=1234)) |
| 740 | return p |
| 741 | |
| 742 | def create_packet_header_IPv6_SRH_IPv4(self, sidlist, segleft): |
| 743 | """Create packet header: IPv4 encapsulated in SRv6: |
| 744 | IPv6 header with SRH, IPv4 header, UDP header |
| 745 | |
| 746 | :param ipv4address dst: inner IPv4 destination address |
| 747 | :param list sidlist: segment list of outer IPv6 SRH |
| 748 | :param int segleft: segments-left field of outer IPv6 SRH |
| 749 | |
| 750 | Outer IPv6 destination address is set to sidlist[segleft] |
| 751 | IPv6 source address is 1234::1 |
| 752 | IPv4 source address is 123.1.1.1 |
| 753 | IPv4 destination address is 124.1.1.1 |
| 754 | UDP source port and destination port are 1234 |
| 755 | """ |
| 756 | |
| 757 | p = (IPv6(src='1234::1', dst=sidlist[segleft]) / |
| 758 | IPv6ExtHdrSegmentRouting(addresses=sidlist, |
| 759 | segleft=segleft, nh=4) / |
| 760 | IP(src='123.1.1.1', dst='124.1.1.1') / |
| 761 | UDP(sport=1234, dport=1234)) |
| 762 | return p |
| 763 | |
Francois Clad | b02f3b7 | 2018-07-04 11:47:21 +0200 | [diff] [blame] | 764 | def create_packet_header_L2(self, vlan=0): |
| 765 | """Create packet header: L2 header |
| 766 | |
| 767 | :param vlan: if vlan!=0 then add 802.1q header |
| 768 | """ |
| 769 | # Note: the dst addr ('00:55:44:33:22:11') is used in |
| 770 | # the compare function compare_rx_tx_packet_T_Encaps_L2 |
| 771 | # to detect presence of L2 in SRH payload |
| 772 | p = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11') |
| 773 | etype = 0x8137 # IPX |
| 774 | if vlan: |
| 775 | # add 802.1q layer |
| 776 | p /= Dot1Q(vlan=vlan, type=etype) |
| 777 | else: |
| 778 | p.type = etype |
| 779 | return p |
| 780 | |
| 781 | def create_packet_header_IPv6_SRH_L2(self, sidlist, segleft, vlan=0): |
| 782 | """Create packet header: L2 encapsulated in SRv6: |
| 783 | IPv6 header with SRH, L2 |
| 784 | |
| 785 | :param list sidlist: segment list of outer IPv6 SRH |
| 786 | :param int segleft: segments-left field of outer IPv6 SRH |
| 787 | :param vlan: L2 vlan; if vlan!=0 then add 802.1q header |
| 788 | |
| 789 | Outer IPv6 destination address is set to sidlist[segleft] |
| 790 | IPv6 source address is 1234::1 |
| 791 | """ |
| 792 | eth = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11') |
| 793 | etype = 0x8137 # IPX |
| 794 | if vlan: |
| 795 | # add 802.1q layer |
| 796 | eth /= Dot1Q(vlan=vlan, type=etype) |
| 797 | else: |
| 798 | eth.type = etype |
| 799 | |
| 800 | p = (IPv6(src='1234::1', dst=sidlist[segleft]) / |
| 801 | IPv6ExtHdrSegmentRouting(addresses=sidlist, |
| 802 | segleft=segleft, nh=59) / |
| 803 | eth) |
| 804 | return p |
| 805 | |
Francois Clad | 0928da9 | 2018-07-09 16:45:23 +0200 | [diff] [blame] | 806 | def get_payload_info(self, packet): |
| 807 | """ Extract the payload_info from the packet |
| 808 | """ |
| 809 | # in most cases, payload_info is in packet[Raw] |
| 810 | # but packet[Raw] gives the complete payload |
| 811 | # (incl L2 header) for the T.Encaps L2 case |
| 812 | try: |
| 813 | payload_info = self.payload_to_info(str(packet[Raw])) |
| 814 | |
| 815 | except: |
| 816 | # remote L2 header from packet[Raw]: |
| 817 | # take packet[Raw], convert it to an Ether layer |
| 818 | # and then extract Raw from it |
| 819 | payload_info = self.payload_to_info( |
| 820 | str(Ether(str(packet[Raw]))[Raw])) |
| 821 | |
| 822 | return payload_info |
| 823 | |
| 824 | def verify_captured_pkts(self, dst_if, capture, compare_func): |
| 825 | """ |
| 826 | Verify captured packet stream for specified interface. |
| 827 | Compare ingress with egress packets using the specified compare fn |
| 828 | |
| 829 | :param dst_if: egress interface of DUT |
| 830 | :param capture: captured packets |
| 831 | :param compare_func: function to compare in and out packet |
| 832 | """ |
| 833 | self.logger.info("Verifying capture on interface %s using function %s" |
| 834 | % (dst_if.name, compare_func.func_name)) |
| 835 | |
| 836 | last_info = dict() |
| 837 | for i in self.pg_interfaces: |
| 838 | last_info[i.sw_if_index] = None |
| 839 | dst_sw_if_index = dst_if.sw_if_index |
| 840 | |
| 841 | for packet in capture: |
| 842 | try: |
| 843 | # extract payload_info from packet's payload |
| 844 | payload_info = self.get_payload_info(packet) |
| 845 | packet_index = payload_info.index |
| 846 | |
| 847 | self.logger.debug("Verifying packet with index %d" |
| 848 | % (packet_index)) |
| 849 | # packet should have arrived on the expected interface |
| 850 | self.assertEqual(payload_info.dst, dst_sw_if_index) |
| 851 | self.logger.debug( |
| 852 | "Got packet on interface %s: src=%u (idx=%u)" % |
| 853 | (dst_if.name, payload_info.src, packet_index)) |
| 854 | |
| 855 | # search for payload_info with same src and dst if_index |
| 856 | # this will give us the transmitted packet |
| 857 | next_info = self.get_next_packet_info_for_interface2( |
| 858 | payload_info.src, dst_sw_if_index, |
| 859 | last_info[payload_info.src]) |
| 860 | last_info[payload_info.src] = next_info |
| 861 | # next_info should not be None |
| 862 | self.assertTrue(next_info is not None) |
| 863 | # index of tx and rx packets should be equal |
| 864 | self.assertEqual(packet_index, next_info.index) |
| 865 | # data field of next_info contains the tx packet |
| 866 | txed_packet = next_info.data |
| 867 | |
| 868 | self.logger.debug(ppp("Transmitted packet:", |
| 869 | txed_packet)) # ppp=Pretty Print Packet |
| 870 | |
| 871 | self.logger.debug(ppp("Received packet:", packet)) |
| 872 | |
| 873 | # compare rcvd packet with expected packet using compare_func |
| 874 | compare_func(txed_packet, packet) |
| 875 | |
| 876 | except: |
| 877 | print packet.command() |
| 878 | self.logger.error(ppp("Unexpected or invalid packet:", packet)) |
| 879 | raise |
| 880 | |
| 881 | # have all expected packets arrived? |
| 882 | for i in self.pg_interfaces: |
| 883 | remaining_packet = self.get_next_packet_info_for_interface2( |
| 884 | i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index]) |
| 885 | self.assertTrue(remaining_packet is None, |
| 886 | "Interface %s: Packet expected from interface %s " |
| 887 | "didn't arrive" % (dst_if.name, i.name)) |
| 888 | |
| 889 | |
| 890 | if __name__ == '__main__': |
| 891 | unittest.main(testRunner=VppTestRunner) |