Filip Tehlar | d5a3380 | 2021-02-20 02:26:17 +0000 | [diff] [blame] | 1 | create host-interface name vpp |
| 2 | create host-interface name priv |
| 3 | pipe create |
| 4 | |
| 5 | set interface ip addr host-vpp 192.168.10.2/24 |
| 6 | set interface state host-vpp up |
| 7 | |
| 8 | ip table add 1 |
| 9 | set int ip table host-priv 1 |
| 10 | set int ip table pipe0.1 1 |
| 11 | |
| 12 | set interface ip addr host-priv 192.168.3.1/24 |
| 13 | set interface state host-priv up |
| 14 | |
| 15 | set int ip address pipe0.0 10.0.0.1/24 |
| 16 | set int ip address pipe0.1 10.0.0.2/24 |
| 17 | set int state pipe0 up |
| 18 | |
| 19 | ikev2 profile add pr1 |
| 20 | ikev2 profile set pr1 auth shared-key-mic string Vpp123 |
| 21 | ikev2 profile set pr1 id local fqdn vpp.home |
| 22 | ikev2 profile set pr1 id remote fqdn roadwarrior.vpn.example.com |
| 23 | ikev2 profile set pr1 traffic-selector local ip-range 192.168.3.0 - 192.168.3.255 port-range 0 - 65535 protocol 0 |
| 24 | ikev2 profile set pr1 traffic-selector remote ip-range 192.168.5.0 - 192.168.5.255 port-range 0 - 65535 protocol 0 |
| 25 | |
| 26 | ip route add table 1 192.168.10.0/24 via 10.0.0.1 pipe0.1 |
| 27 | |
| 28 | create ipip tunnel src 10.0.0.2 dst 192.168.10.1 outer-table-id 1 |
| 29 | set interface ip table ipip0 1 |
| 30 | |
| 31 | ikev2 profile set pr1 tunnel ipip0 |
| 32 | ip route add table 1 192.168.5.0/24 via ipip0 |
| 33 | set interface unnumbered ipip0 use pipe0.1 |
| 34 | |
| 35 | nat44 enable sessions 10 |
| 36 | nat44 add address 192.168.10.2 |
| 37 | set interface nat44 in pipe0.0 out host-vpp |
| 38 | nat44 add static mapping udp local 10.0.0.2 500 external 192.168.10.2 500 |
| 39 | nat44 add static mapping udp local 10.0.0.2 4500 external 192.168.10.2 4500 |
| 40 | |
| 41 | event-logger clear |
| 42 | trace add af-packet-input 100 |
| 43 | ikev2 set liveness 10 2 |
| 44 | ikev2 set logging level 4 |