Dave Wallace | 54a7780 | 2020-11-30 16:56:43 -0500 | [diff] [blame] | 1 | #!/usr/bin/env python3 |
Jakub Grajciar | 692bfc8 | 2019-08-27 10:16:44 +0200 | [diff] [blame] | 2 | |
| 3 | import binascii |
| 4 | import socket |
| 5 | from socket import AF_INET, AF_INET6 |
| 6 | import unittest |
| 7 | import sys |
| 8 | |
| 9 | from framework import VppTestCase |
| 10 | |
| 11 | from scapy.packet import Raw |
| 12 | from scapy.layers.l2 import Ether |
| 13 | from scapy.layers.inet import IP, UDP, TCP |
| 14 | from scapy.layers.inet6 import IPv6 |
| 15 | from util import ppp |
| 16 | |
| 17 | |
| 18 | class TestClassifier(VppTestCase): |
| 19 | |
| 20 | @staticmethod |
| 21 | def _resolve_mask_match(mask_match): |
| 22 | mask_match = binascii.unhexlify(mask_match) |
| 23 | mask_match_len = ((len(mask_match) - 1) // 16 + 1) * 16 |
| 24 | mask_match = mask_match + b'\0' * \ |
| 25 | (mask_match_len - len(mask_match)) |
| 26 | return mask_match, mask_match_len |
| 27 | |
| 28 | @classmethod |
| 29 | def setUpClass(cls): |
| 30 | """ |
| 31 | Perform standard class setup (defined by class method setUpClass in |
| 32 | class VppTestCase) before running the test case, set test case related |
| 33 | variables and configure VPP. |
| 34 | """ |
| 35 | super(TestClassifier, cls).setUpClass() |
| 36 | cls.acl_active_table = '' |
| 37 | cls.af = AF_INET |
| 38 | |
| 39 | def setUp(self): |
| 40 | """ |
| 41 | Perform test setup before test case. |
| 42 | |
| 43 | **Config:** |
| 44 | - create 4 pg interfaces |
| 45 | - untagged pg0/pg1/pg2 interface |
| 46 | pg0 -------> pg1 (IP ACL) |
| 47 | \ |
| 48 | ---> pg2 (MAC ACL)) |
| 49 | \ |
| 50 | -> pg3 (PBR) |
| 51 | - setup interfaces: |
| 52 | - put it into UP state |
| 53 | - set IPv4/6 addresses |
| 54 | - resolve neighbor address using ARP |
| 55 | |
| 56 | :ivar list interfaces: pg interfaces. |
| 57 | :ivar list pg_if_packet_sizes: packet sizes in test. |
| 58 | :ivar dict acl_tbl_idx: ACL table index. |
| 59 | :ivar int pbr_vrfid: VRF id for PBR test. |
| 60 | """ |
| 61 | self.reset_packet_infos() |
| 62 | super(TestClassifier, self).setUp() |
| 63 | if self.af is None: # l2_acl test case |
| 64 | return |
| 65 | |
| 66 | # create 4 pg interfaces |
| 67 | self.create_pg_interfaces(range(4)) |
| 68 | |
| 69 | # packet sizes to test |
| 70 | self.pg_if_packet_sizes = [64, 9018] |
| 71 | |
| 72 | self.interfaces = list(self.pg_interfaces) |
| 73 | |
| 74 | # ACL & PBR vars |
| 75 | self.acl_tbl_idx = {} |
| 76 | self.pbr_vrfid = 200 |
| 77 | |
| 78 | # setup all interfaces |
| 79 | for intf in self.interfaces: |
| 80 | intf.admin_up() |
| 81 | if self.af == AF_INET: |
| 82 | intf.config_ip4() |
| 83 | intf.resolve_arp() |
| 84 | elif self.af == AF_INET6: |
| 85 | intf.config_ip6() |
| 86 | intf.resolve_ndp() |
| 87 | |
| 88 | def tearDown(self): |
| 89 | """Run standard test teardown and acl related log.""" |
| 90 | if self.af is not None and not self.vpp_dead: |
| 91 | if self.af == AF_INET: |
| 92 | self.logger.info(self.vapi.ppcli("show inacl type ip4")) |
| 93 | self.logger.info(self.vapi.ppcli("show outacl type ip4")) |
| 94 | elif self.af == AF_INET6: |
| 95 | self.logger.info(self.vapi.ppcli("show inacl type ip6")) |
| 96 | self.logger.info(self.vapi.ppcli("show outacl type ip6")) |
| 97 | |
| 98 | self.logger.info(self.vapi.cli("show classify table verbose")) |
| 99 | self.logger.info(self.vapi.cli("show ip fib")) |
| 100 | |
| 101 | acl_active_table = 'ip_out' |
| 102 | if self.af == AF_INET6: |
| 103 | acl_active_table = 'ip6_out' |
| 104 | |
| 105 | if self.acl_active_table == acl_active_table: |
| 106 | self.output_acl_set_interface( |
| 107 | self.pg0, self.acl_tbl_idx.get(self.acl_active_table), 0) |
| 108 | self.acl_active_table = '' |
| 109 | elif self.acl_active_table != '': |
| 110 | self.input_acl_set_interface( |
| 111 | self.pg0, self.acl_tbl_idx.get(self.acl_active_table), 0) |
| 112 | self.acl_active_table = '' |
| 113 | |
| 114 | for intf in self.interfaces: |
| 115 | if self.af == AF_INET: |
| 116 | intf.unconfig_ip4() |
| 117 | elif self.af == AF_INET6: |
| 118 | intf.unconfig_ip6() |
| 119 | intf.admin_down() |
| 120 | |
| 121 | super(TestClassifier, self).tearDown() |
| 122 | |
| 123 | @staticmethod |
| 124 | def build_mac_match(dst_mac='', src_mac='', ether_type=''): |
| 125 | """Build MAC ACL match data with hexstring format. |
| 126 | |
| 127 | :param str dst_mac: source MAC address <x:x:x:x:x:x> |
| 128 | :param str src_mac: destination MAC address <x:x:x:x:x:x> |
| 129 | :param str ether_type: ethernet type <0-ffff> |
| 130 | """ |
| 131 | if dst_mac: |
| 132 | dst_mac = dst_mac.replace(':', '') |
| 133 | if src_mac: |
| 134 | src_mac = src_mac.replace(':', '') |
| 135 | |
| 136 | return ('{!s:0>12}{!s:0>12}{!s:0>4}'.format( |
| 137 | dst_mac, src_mac, ether_type)).rstrip('0') |
| 138 | |
| 139 | @staticmethod |
| 140 | def build_mac_mask(dst_mac='', src_mac='', ether_type=''): |
| 141 | """Build MAC ACL mask data with hexstring format. |
| 142 | |
| 143 | :param str dst_mac: source MAC address <0-ffffffffffff> |
| 144 | :param str src_mac: destination MAC address <0-ffffffffffff> |
| 145 | :param str ether_type: ethernet type <0-ffff> |
| 146 | """ |
| 147 | |
| 148 | return ('{!s:0>12}{!s:0>12}{!s:0>4}'.format( |
| 149 | dst_mac, src_mac, ether_type)).rstrip('0') |
| 150 | |
| 151 | @staticmethod |
| 152 | def build_ip_mask(proto='', src_ip='', dst_ip='', |
| 153 | src_port='', dst_port=''): |
| 154 | """Build IP ACL mask data with hexstring format. |
| 155 | |
| 156 | :param str proto: protocol number <0-ff> |
| 157 | :param str src_ip: source ip address <0-ffffffff> |
| 158 | :param str dst_ip: destination ip address <0-ffffffff> |
| 159 | :param str src_port: source port number <0-ffff> |
| 160 | :param str dst_port: destination port number <0-ffff> |
| 161 | """ |
| 162 | |
| 163 | return ('{!s:0>20}{!s:0>12}{!s:0>8}{!s:0>4}{!s:0>4}'.format( |
| 164 | proto, src_ip, dst_ip, src_port, dst_port)).rstrip('0') |
| 165 | |
| 166 | @staticmethod |
| 167 | def build_ip6_mask(nh='', src_ip='', dst_ip='', |
| 168 | src_port='', dst_port=''): |
| 169 | """Build IPv6 ACL mask data with hexstring format. |
| 170 | |
| 171 | :param str nh: next header number <0-ff> |
| 172 | :param str src_ip: source ip address <0-ffffffff> |
| 173 | :param str dst_ip: destination ip address <0-ffffffff> |
| 174 | :param str src_port: source port number <0-ffff> |
| 175 | :param str dst_port: destination port number <0-ffff> |
| 176 | """ |
| 177 | |
| 178 | return ('{!s:0>14}{!s:0>34}{!s:0>32}{!s:0>4}{!s:0>4}'.format( |
| 179 | nh, src_ip, dst_ip, src_port, dst_port)).rstrip('0') |
| 180 | |
| 181 | @staticmethod |
| 182 | def build_ip_match(proto=0, src_ip='', dst_ip='', |
| 183 | src_port=0, dst_port=0): |
| 184 | """Build IP ACL match data with hexstring format. |
| 185 | |
| 186 | :param int proto: protocol number with valid option "x" |
| 187 | :param str src_ip: source ip address with format of "x.x.x.x" |
| 188 | :param str dst_ip: destination ip address with format of "x.x.x.x" |
| 189 | :param int src_port: source port number "x" |
| 190 | :param int dst_port: destination port number "x" |
| 191 | """ |
| 192 | if src_ip: |
| 193 | src_ip = binascii.hexlify(socket.inet_aton(src_ip)).decode('ascii') |
| 194 | if dst_ip: |
| 195 | dst_ip = binascii.hexlify(socket.inet_aton(dst_ip)).decode('ascii') |
| 196 | |
| 197 | return ('{!s:0>20}{!s:0>12}{!s:0>8}{!s:0>4}{!s:0>4}'.format( |
| 198 | hex(proto)[2:], src_ip, dst_ip, hex(src_port)[2:], |
| 199 | hex(dst_port)[2:])).rstrip('0') |
| 200 | |
| 201 | @staticmethod |
| 202 | def build_ip6_match(nh=0, src_ip='', dst_ip='', |
| 203 | src_port=0, dst_port=0): |
| 204 | """Build IPv6 ACL match data with hexstring format. |
| 205 | |
| 206 | :param int nh: next header number with valid option "x" |
| 207 | :param str src_ip: source ip6 address with format of "xxx:xxxx::xxxx" |
| 208 | :param str dst_ip: destination ip6 address with format of |
| 209 | "xxx:xxxx::xxxx" |
| 210 | :param int src_port: source port number "x" |
| 211 | :param int dst_port: destination port number "x" |
| 212 | """ |
| 213 | if src_ip: |
| 214 | if sys.version_info[0] == 2: |
| 215 | src_ip = binascii.hexlify(socket.inet_pton( |
| 216 | socket.AF_INET6, src_ip)) |
| 217 | else: |
| 218 | src_ip = socket.inet_pton(socket.AF_INET6, src_ip).hex() |
| 219 | |
| 220 | if dst_ip: |
| 221 | if sys.version_info[0] == 2: |
| 222 | dst_ip = binascii.hexlify(socket.inet_pton( |
| 223 | socket.AF_INET6, dst_ip)) |
| 224 | else: |
| 225 | dst_ip = socket.inet_pton(socket.AF_INET6, dst_ip).hex() |
| 226 | |
| 227 | return ('{!s:0>14}{!s:0>34}{!s:0>32}{!s:0>4}{!s:0>4}'.format( |
| 228 | hex(nh)[2:], src_ip, dst_ip, hex(src_port)[2:], |
| 229 | hex(dst_port)[2:])).rstrip('0') |
| 230 | |
| 231 | def create_stream(self, src_if, dst_if, packet_sizes, |
| 232 | proto_l=UDP(sport=1234, dport=5678)): |
| 233 | """Create input packet stream for defined interfaces. |
| 234 | |
| 235 | :param VppInterface src_if: Source Interface for packet stream. |
| 236 | :param VppInterface dst_if: Destination Interface for packet stream. |
| 237 | :param list packet_sizes: packet size to test. |
| 238 | :param Scapy proto_l: Required IP protocol. Default protocol is UDP. |
| 239 | """ |
| 240 | pkts = [] |
| 241 | |
| 242 | for size in packet_sizes: |
| 243 | info = self.create_packet_info(src_if, dst_if) |
| 244 | payload = self.info_to_payload(info) |
| 245 | if self.af == AF_INET: |
| 246 | p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| 247 | IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4) / |
| 248 | proto_l / |
| 249 | Raw(payload)) |
| 250 | elif self.af == AF_INET6: |
| 251 | p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| 252 | IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6) / |
| 253 | proto_l / |
| 254 | Raw(payload)) |
| 255 | info.data = p.copy() |
| 256 | self.extend_packet(p, size) |
| 257 | pkts.append(p) |
| 258 | return pkts |
| 259 | |
| 260 | def verify_capture(self, dst_if, capture, proto_l=UDP): |
| 261 | """Verify captured input packet stream for defined interface. |
| 262 | |
| 263 | :param VppInterface dst_if: Interface to verify captured packet stream. |
| 264 | :param list capture: Captured packet stream. |
| 265 | :param Scapy proto_l: Required IP protocol. Default protocol is UDP. |
| 266 | """ |
| 267 | ip_proto = IP |
| 268 | if self.af == AF_INET6: |
| 269 | ip_proto = IPv6 |
| 270 | self.logger.info("Verifying capture on interface %s" % dst_if.name) |
| 271 | last_info = dict() |
| 272 | for i in self.interfaces: |
| 273 | last_info[i.sw_if_index] = None |
| 274 | dst_sw_if_index = dst_if.sw_if_index |
| 275 | for packet in capture: |
| 276 | try: |
| 277 | ip_received = packet[ip_proto] |
| 278 | proto_received = packet[proto_l] |
| 279 | payload_info = self.payload_to_info(packet[Raw]) |
| 280 | packet_index = payload_info.index |
| 281 | self.assertEqual(payload_info.dst, dst_sw_if_index) |
| 282 | self.logger.debug( |
| 283 | "Got packet on port %s: src=%u (id=%u)" % |
| 284 | (dst_if.name, payload_info.src, packet_index)) |
| 285 | next_info = self.get_next_packet_info_for_interface2( |
| 286 | payload_info.src, dst_sw_if_index, |
| 287 | last_info[payload_info.src]) |
| 288 | last_info[payload_info.src] = next_info |
| 289 | self.assertTrue(next_info is not None) |
| 290 | self.assertEqual(packet_index, next_info.index) |
| 291 | saved_packet = next_info.data |
| 292 | ip_saved = saved_packet[ip_proto] |
| 293 | proto_saved = saved_packet[proto_l] |
| 294 | # Check standard fields |
| 295 | self.assertEqual(ip_received.src, ip_saved.src) |
| 296 | self.assertEqual(ip_received.dst, ip_saved.dst) |
| 297 | self.assertEqual(proto_received.sport, proto_saved.sport) |
| 298 | self.assertEqual(proto_received.dport, proto_saved.dport) |
| 299 | except BaseException: |
| 300 | self.logger.error(ppp("Unexpected or invalid packet:", packet)) |
| 301 | raise |
| 302 | for i in self.interfaces: |
| 303 | remaining_packet = self.get_next_packet_info_for_interface2( |
| 304 | i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index]) |
| 305 | self.assertTrue(remaining_packet is None, |
| 306 | "Interface %s: Packet expected from interface %s " |
| 307 | "didn't arrive" % (dst_if.name, i.name)) |
| 308 | |
| 309 | def create_classify_table(self, key, mask, data_offset=0): |
| 310 | """Create Classify Table |
| 311 | |
| 312 | :param str key: key for classify table (ex, ACL name). |
| 313 | :param str mask: mask value for interested traffic. |
| 314 | :param int data_offset: |
| 315 | """ |
| 316 | mask_match, mask_match_len = self._resolve_mask_match(mask) |
| 317 | r = self.vapi.classify_add_del_table( |
| 318 | is_add=1, |
| 319 | mask=mask_match, |
| 320 | mask_len=mask_match_len, |
| 321 | match_n_vectors=(len(mask) - 1) // 32 + 1, |
| 322 | miss_next_index=0, |
| 323 | current_data_flag=1, |
| 324 | current_data_offset=data_offset) |
| 325 | self.assertIsNotNone(r, 'No response msg for add_del_table') |
| 326 | self.acl_tbl_idx[key] = r.new_table_index |
| 327 | |
| 328 | def create_classify_session(self, table_index, match, pbr_option=0, |
| 329 | vrfid=0, is_add=1): |
| 330 | """Create Classify Session |
| 331 | |
| 332 | :param int table_index: table index to identify classify table. |
| 333 | :param str match: matched value for interested traffic. |
| 334 | :param int pbr_option: enable/disable PBR feature. |
| 335 | :param int vrfid: VRF id. |
| 336 | :param int is_add: option to configure classify session. |
| 337 | - create(1) or delete(0) |
| 338 | """ |
| 339 | mask_match, mask_match_len = self._resolve_mask_match(match) |
| 340 | r = self.vapi.classify_add_del_session( |
| 341 | is_add=is_add, |
| 342 | table_index=table_index, |
| 343 | match=mask_match, |
| 344 | match_len=mask_match_len, |
| 345 | opaque_index=0, |
| 346 | action=pbr_option, |
| 347 | metadata=vrfid) |
| 348 | self.assertIsNotNone(r, 'No response msg for add_del_session') |
| 349 | |
| 350 | def input_acl_set_interface(self, intf, table_index, is_add=1): |
| 351 | """Configure Input ACL interface |
| 352 | |
| 353 | :param VppInterface intf: Interface to apply Input ACL feature. |
| 354 | :param int table_index: table index to identify classify table. |
| 355 | :param int is_add: option to configure classify session. |
| 356 | - enable(1) or disable(0) |
| 357 | """ |
| 358 | r = None |
| 359 | if self.af == AF_INET: |
| 360 | r = self.vapi.input_acl_set_interface( |
| 361 | is_add, |
| 362 | intf.sw_if_index, |
| 363 | ip4_table_index=table_index) |
| 364 | elif self.af == AF_INET6: |
| 365 | r = self.vapi.input_acl_set_interface( |
| 366 | is_add, |
| 367 | intf.sw_if_index, |
| 368 | ip6_table_index=table_index) |
| 369 | else: |
| 370 | r = self.vapi.input_acl_set_interface( |
| 371 | is_add, |
| 372 | intf.sw_if_index, |
| 373 | l2_table_index=table_index) |
| 374 | self.assertIsNotNone(r, 'No response msg for acl_set_interface') |
| 375 | |
| 376 | def output_acl_set_interface(self, intf, table_index, is_add=1): |
| 377 | """Configure Output ACL interface |
| 378 | |
| 379 | :param VppInterface intf: Interface to apply Output ACL feature. |
| 380 | :param int table_index: table index to identify classify table. |
| 381 | :param int is_add: option to configure classify session. |
| 382 | - enable(1) or disable(0) |
| 383 | """ |
| 384 | r = None |
| 385 | if self.af == AF_INET: |
| 386 | r = self.vapi.output_acl_set_interface( |
| 387 | is_add, |
| 388 | intf.sw_if_index, |
| 389 | ip4_table_index=table_index) |
| 390 | elif self.af == AF_INET6: |
| 391 | r = self.vapi.output_acl_set_interface( |
| 392 | is_add, |
| 393 | intf.sw_if_index, |
| 394 | ip6_table_index=table_index) |
| 395 | else: |
| 396 | r = self.vapi.output_acl_set_interface( |
| 397 | is_add, |
| 398 | intf.sw_if_index, |
| 399 | l2_table_index=table_index) |
| 400 | self.assertIsNotNone(r, 'No response msg for acl_set_interface') |
| 401 | |
| 402 | def config_pbr_fib_entry(self, intf, is_add=1): |
| 403 | """Configure fib entry to route traffic toward PBR VRF table |
| 404 | |
| 405 | :param VppInterface intf: destination interface to be routed for PBR. |
| 406 | |
| 407 | """ |
| 408 | addr_len = 24 |
Paul Vinciguerra | 2f15631 | 2020-05-02 22:34:40 -0400 | [diff] [blame] | 409 | self.vapi.ip_add_del_route(dst_address=intf.local_ip4, |
Jakub Grajciar | 692bfc8 | 2019-08-27 10:16:44 +0200 | [diff] [blame] | 410 | dst_address_length=addr_len, |
Paul Vinciguerra | 2f15631 | 2020-05-02 22:34:40 -0400 | [diff] [blame] | 411 | next_hop_address=intf.remote_ip4, |
Jakub Grajciar | 692bfc8 | 2019-08-27 10:16:44 +0200 | [diff] [blame] | 412 | table_id=self.pbr_vrfid, is_add=is_add) |
| 413 | |
| 414 | def verify_vrf(self, vrf_id): |
| 415 | """ |
| 416 | Check if the FIB table / VRF ID is configured. |
| 417 | |
| 418 | :param int vrf_id: The FIB table / VRF ID to be verified. |
| 419 | :return: 1 if the FIB table / VRF ID is configured, otherwise return 0. |
| 420 | """ |
| 421 | ip_fib_dump = self.vapi.ip_route_dump(vrf_id, False) |
| 422 | vrf_count = len(ip_fib_dump) |
| 423 | if vrf_count == 0: |
| 424 | self.logger.info("IPv4 VRF ID %d is not configured" % vrf_id) |
| 425 | return 0 |
| 426 | else: |
| 427 | self.logger.info("IPv4 VRF ID %d is configured" % vrf_id) |
| 428 | return 1 |