| --- |
| # |
| # ============LICENSE_START======================================================= |
| # Copyright (C) 2019 Nordix Foundation. |
| # ================================================================================ |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # ============LICENSE_END========================================================= |
| |
| #-------------------------------------------------------------------------------------- |
| # The jobs declared in this JJB configuration file are used for verifying cloud-infra |
| # engine from the tip of the master branch periodically to check the stability of it. |
| # |
| # These jobs are set to run on slaves with label vpod-deploy-ubuntu1604. |
| # The slaves have |
| # - Ubuntu1604 as the base distro |
| # - nested virtualization |
| # - internet access |
| # - passwordless sudo |
| # - 16 CPUs/32GB RAM/200 GB Disk |
| # - docker, git vim curl wget zip unzip chrony apt-transport-https ca-certificates curl |
| # gnupg-agent software-properties-common docker-ce docker-ce-cli containerd.io openjdk-8-jre |
| # |
| # The slaves should not have a cloud infra scenario deployed on them. |
| #-------------------------------------------------------------------------------------- |
| |
| - project: |
| name: 'cloud-infra-periodic-onap' |
| |
| project: 'infra/engine' |
| |
| onap-branch: |
| - 'dublin': |
| nordix-branch: master |
| onap-version: 4.0.0-ONAP |
| onap-flavor: full |
| engine-version: master |
| engine-refspec: master |
| deploy-scenario-version: master |
| deploy-scenario-refspec: master |
| disabled: false |
| - 'master': |
| nordix-branch: master |
| onap-version: master |
| onap-flavor: full |
| engine-version: master |
| engine-refspec: master |
| deploy-scenario-version: master |
| deploy-scenario-refspec: master |
| disabled: true |
| |
| distro: |
| - ubuntu1804 |
| |
| deploy-scenario: |
| - onap-oom-nofeature |
| |
| type: |
| - cloud: |
| provisioner-type: heat |
| installer-type: kubespray |
| slave-label: 'jumphost-onap-ubuntu1804' |
| |
| phase: |
| - onap-deploy: |
| build-timeout: 150 |
| - oom-healthcheck: |
| build-timeout: 30 |
| - onap-healthcheck: |
| build-timeout: 30 |
| - promote-onap: |
| build-timeout: 5 |
| |
| jobs: |
| - '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| - '{phase}-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| |
| - job-template: |
| name: '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| |
| project-type: multijob |
| |
| disabled: '{obj:disabled}' |
| |
| concurrent: true |
| |
| parameters: |
| - project-parameters: |
| project: '{project}' |
| branch: '{nordix-branch}' |
| - nordix-gerrit-parameters |
| - label: |
| name: SLAVE_LABEL |
| default: '{slave-label}' |
| description: 'Slave label to schedule this job on. All slaves have Ubuntu1604 no matter what distro target nodes use' |
| - string: |
| name: DISTRO |
| default: '{distro}' |
| description: 'Distribution to use for configuring target nodes (networking etc.)' |
| - string: |
| name: PROVISIONER_TYPE |
| default: '{provisioner-type}' |
| description: 'Provisioner to use for provisioning nodes' |
| - string: |
| name: INSTALLER_TYPE |
| default: '{installer-type}' |
| description: 'Installer to use for deploying the scenario' |
| - string: |
| name: DEPLOY_SCENARIO |
| default: '{deploy-scenario}' |
| description: 'Scenario to deploy and test' |
| - string: |
| name: HEAT_ENVIRONMENT_FILE |
| default: "file://$WORKSPACE/.cache/repos/swconfig/scenarios/$DEPLOY_SCENARIO/$INSTALLER_TYPE/role/$DEPLOY_SCENARIO/files/heat-environment-full.yaml" |
| description: 'Type of the deployment' |
| - string: |
| name: DEPLOY_TYPE |
| default: '{type}' |
| description: 'Type of the deployment' |
| - string: |
| name: ONAP_VERSION |
| default: '{onap-version}' |
| description: 'ONAP version to deploy' |
| - string: |
| name: ONAP_FLAVOR |
| default: '{onap-flavor}' |
| description: 'ONAP flavor to deploy - could be core, small, medium, full. Also used for xtesting as run_type.' |
| - string: |
| name: ENGINE_REPO_URL |
| default: 'https://gerrit.nordix.org/infra/engine.git' |
| description: 'URL to Nordix cloud-infra/engine repository' |
| - string: |
| name: ENGINE_VERSION |
| default: '{engine-version}' |
| description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch' |
| - string: |
| name: ENGINE_REFSPEC |
| default: '{engine-refspec}' |
| description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.' |
| - string: |
| name: DEPLOY_SCENARIO_VERSION |
| default: '{deploy-scenario-version}' |
| description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.' |
| - string: |
| name: DEPLOY_SCENARIO_REFSPEC |
| default: '{deploy-scenario-refspec}' |
| description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.' |
| - string: |
| name: XTESTING_REPO_URL |
| default: 'https://gerrit.nordix.org/opnfv/xtesting-onap.git' |
| description: 'URL to Nordix xtesting-onap repository' |
| - string: |
| name: ENGINE_ANSIBLE_PARAMS |
| default: '' |
| description: 'Extra parameters that can be added when run the play books.' |
| - string: |
| name: CLEANUP |
| default: 'true' |
| description: 'Cleanup leftovers of the previous run' |
| |
| properties: |
| - logrotate |
| - build-blocker: |
| use-build-blocker: true |
| blocking-jobs: |
| - 'cloud-infra-periodic-engine-.*' |
| - 'onap-.*' |
| - 'k8-.*' |
| block-level: 'NODE' |
| - throttle: |
| max-per-node: 1 |
| max-total: 3 |
| option: project |
| |
| wrappers: |
| - build-timeout: |
| timeout: 220 |
| - fix-workspace-permissions |
| |
| scm: |
| - git-scm: |
| ssh-credentials-id: nordixinfra-nordix-gerrit-ssh |
| branch: '{nordix-branch}' |
| refspec: '' |
| wipe_workspace: true |
| clean_before: false |
| |
| builders: |
| - description-setter: |
| description: $INSTALLER_TYPE | $DEPLOY_SCENARIO |
| - multijob: |
| name: Deploy ONAP |
| condition: SUCCESSFUL |
| projects: |
| - name: 'onap-deploy-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| current-parameters: true |
| predefined-parameters: | |
| DISTRO=$DISTRO |
| DEPLOY_TYPE=$DEPLOY_TYPE |
| PROVISIIONER_TYPE=$PROVISIIONER_TYPE |
| INSTALLER_TYPE=$INSTALLER_TYPE |
| DEPLOY_SCENARIO=$DEPLOY_SCENARIO |
| HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE |
| ONAP_VERSION=$ONAP_VERSION |
| ONAP_FLAVOR=$ONAP_FLAVOR |
| ENGINE_VERSION=$ENGINE_VERSION |
| ENGINE_REFSPEC=$ENGINE_REFSPEC |
| DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION |
| DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC |
| XTESTING_REPO_URL=$XTESTING_REPO_URL |
| ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS |
| CLEANUP=$CLEANUP |
| git-revision: true |
| node-parameters: true |
| kill-phase-on: FAILURE |
| abort-all-job: true |
| - multijob: |
| name: OOM Healthcheck |
| condition: SUCCESSFUL |
| projects: |
| - name: 'oom-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| current-parameters: true |
| predefined-parameters: | |
| DISTRO=$DISTRO |
| DEPLOY_TYPE=$DEPLOY_TYPE |
| HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE |
| PROVISIIONER_TYPE=$PROVISIIONER_TYPE |
| INSTALLER_TYPE=$INSTALLER_TYPE |
| DEPLOY_SCENARIO=$DEPLOY_SCENARIO |
| ONAP_VERSION=$ONAP_VERSION |
| ONAP_FLAVOR=$ONAP_FLAVOR |
| ENGINE_VERSION=$ENGINE_VERSION |
| ENGINE_REFSPEC=$ENGINE_REFSPEC |
| DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION |
| DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC |
| XTESTING_REPO_URL=$XTESTING_REPO_URL |
| ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS |
| CLEANUP=$CLEANUP |
| node-parameters: true |
| kill-phase-on: NEVER |
| abort-all-job: false |
| - multijob: |
| name: ONAP Healthcheck |
| condition: SUCCESSFUL |
| projects: |
| - name: 'onap-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| current-parameters: true |
| predefined-parameters: | |
| DISTRO=$DISTRO |
| DEPLOY_TYPE=$DEPLOY_TYPE |
| PROVISIIONER_TYPE=$PROVISIIONER_TYPE |
| INSTALLER_TYPE=$INSTALLER_TYPE |
| DEPLOY_SCENARIO=$DEPLOY_SCENARIO |
| HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE |
| ONAP_VERSION=$ONAP_VERSION |
| ONAP_FLAVOR=$ONAP_FLAVOR |
| ENGINE_VERSION=$ENGINE_VERSION |
| ENGINE_REFSPEC=$ENGINE_REFSPEC |
| DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION |
| DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC |
| ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS |
| XTESTING_REPO_URL=$XTESTING_REPO_URL |
| ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS |
| CLEANUP=$CLEANUP |
| node-parameters: true |
| kill-phase-on: NEVER |
| abort-all-job: false |
| - multijob: |
| name: Promote ONAP |
| condition: SUCCESSFUL |
| projects: |
| - name: 'promote-onap-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| current-parameters: true |
| predefined-parameters: | |
| DISTRO=$DISTRO |
| DEPLOY_TYPE=$DEPLOY_TYPE |
| HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE |
| INSTALLER_TYPE=$INSTALLER_TYPE |
| DEPLOY_SCENARIO=$DEPLOY_SCENARIO |
| ONAP_VERSION=$ONAP_VERSION |
| ONAP_FLAVOR=$ONAP_FLAVOR |
| ENGINE_VERSION=$ENGINE_VERSION |
| ENGINE_REFSPEC=$ENGINE_REFSPEC |
| DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION |
| DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC |
| XTESTING_REPO_URL=$XTESTING_REPO_URL |
| ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS |
| CLEANUP=$CLEANUP |
| node-parameters: true |
| kill-phase-on: NEVER |
| abort-all-job: false |
| |
| - job-template: |
| name: '{phase}-periodic-{distro}-{installer-type}-{type}-{onap-branch}' |
| |
| disabled: false |
| |
| concurrent: true |
| |
| properties: |
| - logrotate |
| |
| parameters: |
| - project-parameters: |
| project: '{project}' |
| branch: '{nordix-branch}' |
| - nordix-gerrit-parameters |
| - label: |
| name: SLAVE_LABEL |
| default: 'jumphost-onap-ubuntu1804' |
| description: 'Slave label to schedule this job on. All slaves have Ubuntu1604 no matter what distro target nodes use' |
| - string: |
| name: DISTRO |
| default: 'ubuntu1804' |
| description: 'Distribution to use for configuring target nodes (networking etc.). Overriden by upstream job.' |
| - string: |
| name: PROVISIONER_TYPE |
| default: 'heat' |
| description: 'Provisioner to use for provisioning nodes' |
| - string: |
| name: INSTALLER_TYPE |
| default: 'kubespray' |
| description: 'Installer to use for deploying the scenario' |
| - string: |
| name: DEPLOY_SCENARIO |
| default: 'onap-oom-nofeature' |
| description: 'Scenario to deploy and test' |
| - string: |
| name: HEAT_ENVIRONMENT_FILE |
| default: "file://$WORKSPACE/.cache/repos/swconfig/scenarios/$DEPLOY_SCENARIO/$INSTALLER_TYPE/role/$DEPLOY_SCENARIO/files/heat-environment-full.yaml" |
| description: 'Type of the deployment' |
| - string: |
| name: DEPLOY_TYPE |
| default: 'cloud' |
| description: 'Type of the deployment. Overriden by upstream job.' |
| - string: |
| name: ONAP_VERSION |
| default: 'master' |
| description: 'ONAP version to deploy' |
| - string: |
| name: ONAP_FLAVOR |
| default: '{onap-flavor}' |
| description: 'ONAP flavor to deploy - could be core, small, medium, full. Also used for xtesting as run_type.' |
| - string: |
| name: ENGINE_VERSION |
| default: 'master' |
| description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch' |
| - string: |
| name: ENGINE_REFSPEC |
| default: 'master' |
| description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.' |
| - string: |
| name: DEPLOY_SCENARIO_VERSION |
| default: 'master' |
| description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.' |
| - string: |
| name: DEPLOY_SCENARIO_REFSPEC |
| default: 'master' |
| description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.' |
| - string: |
| name: XTESTING_REPO_URL |
| default: 'https://gerrit.nordix.org/opnfv/xtesting-onap.git' |
| description: 'URL to Nordix xtesting-onap repository' |
| - string: |
| name: ENGINE_ANSIBLE_PARAMS |
| default: '' |
| description: 'Extra parameters that can be added when run the play books.' |
| - string: |
| name: CLEANUP |
| default: 'true' |
| |
| wrappers: |
| - build-timeout: |
| timeout: '{build-timeout}' |
| - fix-workspace-permissions |
| |
| scm: |
| - git-scm: |
| ssh-credentials-id: nordixinfra-nordix-gerrit-ssh |
| branch: '{nordix-branch}' |
| refspec: '' |
| wipe_workspace: true |
| clean_before: false |
| |
| builders: |
| - description-setter: |
| description: $INSTALLER_TYPE - $DEPLOY_SCENARIO |
| - '{phase}-macro' |
| |
| # vim: set ts=2 sw=2 expandtab: |