blob: 0dff80370d518ac9276d72bf38101990d4146c54 [file] [log] [blame]
#!/bin/bash
#########
# ============LICENSE_START====================================================
# org.onap.aaf
# ===========================================================================
# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
# ===========================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END====================================================
#
# This script is run when starting client Container.
# It needs to cover the cases where the initial data doesn't exist, and when it has already been configured (don't overwrite)
#
JAVA=/usr/bin/java
AAF_INTERFACE_VERSION=2.1
# Extract Name, Domain and NS from FQI
FQIA=($(echo ${APP_FQI} | tr '@' '\n'))
FQI_SHORT=${FQIA[0]}
FQI_DOMAIN=${FQIA[1]}
# Reverse DOMAIN for NS
FQIA_E=($(echo ${FQI_DOMAIN} | tr '.' '\n'))
for (( i=( ${#FQIA_E[@]} -1 ); i>0; i-- )); do
NS=${NS}${FQIA_E[i]}'.'
done
NS=${NS}${FQIA_E[0]}
CONFIG="/opt/app/aaf_config"
OSAAF="/opt/app/osaaf"
LOCAL="$OSAAF/local"
DOT_AAF="$HOME/.aaf"
SSO="$DOT_AAF/sso.props"
if [ -e "$CONFIG" ]; then
CONFIG_BIN="$CONFIG/bin"
else
CONFIG_BIN="."
fi
CLPATH="$CONFIG_BIN/aaf-auth-cmd-*-full.jar"
JAVA_CADI="$JAVA -cp $CLPATH org.onap.aaf.cadi.CmdLine"
JAVA_AGENT="$JAVA -cp $CLPATH -Dcadi_prop_files=$SSO org.onap.aaf.cadi.configure.Agent"
JAVA_AGENT_SELF="$JAVA -cp $CLPATH -Dcadi_prop_files=$LOCAL/${NS}.props org.onap.aaf.cadi.configure.Agent"
JAVA_AAFCLI="$JAVA -cp $CLPATH -Dcadi_prop_files=$LOCAL/org.osaaf.aaf.props org.onap.aaf.auth.cmd.AAFcli"
# Check for local dir
if [ ! -d $LOCAL ]; then
mkdir -p $LOCAL
for D in bin logs; do
mkdir -p $OSAAF/$D
cp $CONFIG/$D/* $OSAAF/$D
done
fi
# Setup Bash, first time only
if [ ! -e "$HOME/.bashrc" ] || [ -z "$(grep cadi $HOME/.bashrc)" ]; then
echo "alias cadi='$JAVA_CADI \$*'" >>$HOME/.bashrc
echo "alias agent='$CONFIG_BIN/agent.sh agent \$*'" >>$HOME/.bashrc
echo "alias aafcli='$JAVA_AAFCLI \$*'" >>$HOME/.bashrc
chmod a+x $CONFIG_BIN/agent.sh
. $HOME/.bashrc
fi
# Setup SSO info for Deploy ID
function sso_encrypt() {
$JAVA_CADI digest ${1} $DOT_AAF/keyfile
}
if [ ! -e "$DOT_AAF/truststoreONAPall.jks" ]; then
mkdir -p $DOT_AAF
base64 -d $CONFIG/cert/truststoreONAPall.jks.b64 > $DOT_AAF/truststoreONAPall.jks
fi
# Create Deployer Info, located at /root/.aaf
if [ ! -e "$DOT_AAF/keyfile" ]; then
$JAVA_CADI keygen $DOT_AAF/keyfile
chmod 400 $DOT_AAF/keyfile
# Add Deployer Creds to Root's SSO
DEPLOY_FQI="${DEPLOY_FQI:=$app_id}"
echo "aaf_id=${DEPLOY_FQI}" > ${SSO}
if [ ! "${DEPLOY_PASSWORD}" = "" ]; then
echo aaf_password=enc:$(sso_encrypt ${DEPLOY_PASSWORD}) >> ${SSO}
fi
# Cover case where using app.props
aaf_locater_container_ns=${aaf_locator_container_ns:=$CONTAINER_NS}
for E in $(env); do
if [ "${E:0:4}" = "aaf_" ] || [ "${E:0:5}" = "cadi_" ]; then
# Use Deployer ID in ${SSO}
if [ "app_id" != "${E%=*}" ]; then
S="${E/_helm/.helm}"
S="${S/_oom/.oom}"
echo "$S" >> ${SSO}
fi
fi
done
echo "cadi_truststore=$DOT_AAF/truststoreONAPall.jks" >> ${SSO}
echo cadi_truststore_password=enc:$(sso_encrypt changeit) >> ${SSO}
echo "Caller Properties Initialized"
INITIALIZED="true"
fi
echo "cat SSO"
cat ${SSO}
echo "dog"
# Only initialize once, automatically...
if [ ! -e $LOCAL/${NS}.props ]; then
if [ -e '/opt/app/aaf_config/bin' ]; then
cp /opt/app/aaf_config/bin/*.jar $LOCAL
echo "#!/bin/bash" > agent
echo 'case "$1" in' >> agent
echo ' ""|-?|--help)CMD="";FQI="";FQDN="";;' >> agent
echo ' validate)CMD="$1";FQI="";FQDN="${2:-'"$NS.props"'}";;' >> agent
echo ' *)CMD="$1";FQI="${2:-'"$APP_FQI"'}";FQDN="${3:-'"$APP_FQDN"'}";;' >> agent
echo 'esac' >> agent
echo 'java -cp '$(ls aaf-auth-cmd-*-full.jar)' -Dcadi_prop_files='"$NS"'.props org.onap.aaf.cadi.configure.Agent $CMD $FQI $FQDN' >> agent
echo "#!/bin/bash" > cadi
echo "java -cp $(ls aaf-auth-cmd-*-full.jar) -Dcadi_prop_files=$NS.props org.onap.aaf.cadi.CmdLine " '$*' >> cadi
# echo "#!/bin/bash" > aafcli
# echo "java -cp $(ls aaf-auth-cmd-*-full.jar) -Dcadi_prop_files=$NS.props org.onap.aaf.auth.cmd.AAFcli " '$*' >> aafcli
echo "#!/bin/bash" > testConnectivity
echo "java -cp $(ls aaf-auth-cmd-*-full.jar) org.onap.aaf.cadi.aaf.TestConnectivity $NS.props" >> testConnectivity
chmod ug+x agent cadi testConnectivity
fi
echo "#### Create Configuration files "
$JAVA_AGENT config $APP_FQI \
cadi_etc_dir=$LOCAL \
cadi_prop_files=$SSO
#aaf_url=https://AAF_LOCATE_URL/AAF_NS.locate:${AAF_INTERFACE_VERSION}
cat $LOCAL/$NS.props
echo
echo "#### Certificate Authorization Artifact"
# TMP=$(mktemp)
TMP=$LOCAL/agent.log
$JAVA_AGENT read ${APP_FQI} ${APP_FQDN} \
cadi_prop_files=${SSO} \
cadi_etc_dir=$LOCAL | tee $TMP
if [ -n "$(grep 'Namespace:' $TMP)" ]; then
echo "#### Place Certificates (by deployer)"
$JAVA_AGENT place ${APP_FQI} ${APP_FQDN} \
cadi_prop_files=${SSO} \
cadi_etc_dir=$LOCAL
echo "#### Validate Configuration and Certificate with live call"
echo "Obtained Certificates"
INITIALIZED="true"
else
echo "#### Certificate Authorization Artifact must be valid to continue"
fi
rm $TMP
fi
# Now run a command
CMD=$2
if [ -z "$CMD" ]; then
if [ -n "$INITIALIZED" ]; then
echo "Initialization complete"
else
$JAVA_AGENT
fi
else
shift
shift
case "$CMD" in
ls)
echo ls requested
find /opt/app/osaaf -depth
;;
cat)
if [ "$1" = "" ]; then
echo "usage: cat <file... ONLY files ending in .props>"
else
if [[ $1 == *.props ]]; then
echo
echo "## CONTENTS OF $3"
echo
cat "$1"
else
echo "### ERROR ####"
echo " \"cat\" may only be used with files ending with \".props\""
fi
fi
;;
showpass)
echo "## Show Passwords"
$JAVA_AGENT showpass ${APP_FQI} ${APP_FQDN}
;;
check)
echo "## Check Certificate"
$JAVA_AGENT check ${APP_FQI} ${APP_FQDN}
;;
validate)
echo "## validate requested"
$JAVA_AGENT_SELF validate
;;
renew)
echo "## Renew Certificate"
$JAVA_AGENT place ${APP_FQI} ${APP_FQDN}
;;
bash)
shift
cd $LOCAL || exit
exec bash "$@"
;;
setProp)
cd $LOCAL || exit
FILES=$(grep -l "$1" ./*.props)
if [ -z "$FILES" ]; then
if [ -z "$3" ]; then
FILES=${NS}.props
else
FILES="$3"
fi
ADD=Y
fi
for F in $FILES; do
if [ "$ADD" = "Y" ]; then
echo "Changing $1 to $F"
echo "$1=$2" >> $F
else
echo "Changing $1 in $F"
sed -i.backup -e "s/\\(${1}.*=\\).*/\\1${2}/" $F
fi
cat $F
done
;;
encrypt)
cd $LOCAL || exit
echo $1
FILES=$(grep -l "$1" ./*.props)
if [ "$FILES" = "" ]; then
FILES=$LOCAL/${NS}.cred.props
ADD=Y
fi
for F in $FILES; do
echo "Changing $1 in $F"
if [ "$2" = "" ]; then
read -r -p "Password (leave blank to cancel): " -s ORIG_PW
echo " "
if [ "$ORIG_PW" = "" ]; then
echo canceling...
break
fi
else
ORIG_PW="$2"
fi
PWD=$($JAVA_CADI digest "$ORIG_PW" $LOCAL/${NS}.keyfile)
if [ "$ADD" = "Y" ]; then
echo "$1=enc:$PWD" >> $F
else
sed -i.backup -e "s/\\($1.*enc:\\).*/\\1$PWD/" $F
fi
cat $F
done
;;
taillog)
sh /opt/app/osaaf/logs/taillog
;;
testConnectivity|testconnectivity)
echo "--- Test Connectivity ---"
$JAVA -cp $CONFIG_BIN/aaf-auth-cmd-*-full.jar org.onap.aaf.cadi.aaf.TestConnectivity $LOCAL/org.osaaf.aaf.props
;;
--help | -?)
case "$1" in
"")
echo "--- Agent Container Comands ---"
echo " ls - Lists all files in Configuration"
echo " cat <file.props>> - Shows the contents (Prop files only)"
echo " validate - Runs a test using Configuration"
echo " setProp <tag> [<value>] - set value on 'tag' (if no value, it will be queried from config)"
echo " encrypt <tag> [<pass>] - set passwords on Configuration (if no pass, it will be queried)"
echo " bash - run bash in Container"
echo " Note: the following aliases are preset"
echo " cadi - CADI CmdLine tool"
echo " agent - Agent Java tool (see above help)"
echo ""
echo " --help|-? [cadi|agent] - This help, cadi help or agent help"
;;
cadi)
echo "--- cadi Tool Comands ---"
$JAVA_CADI
;;
agent)
echo "--- agent Tool Comands ---"
$JAVA_AGENT
;;
aafcli)
echo "--- aafcli Tool Comands ---"
$JAVA_AAFCLI
;;
esac
echo ""
;;
### Possible Dublin
# sample)
# echo "--- run Sample Servlet App ---"
# $JAVA -Dcadi_prop_files=$LOCAL/${NS}.props -cp $CONFIG_BIN/aaf-auth-cmd-*-full.jar:$CONFIG_BIN/aaf-cadi-servlet-sample-*-sample.jar org.onap.aaf.sample.cadi.jetty.JettyStandalone ${NS}.props
# ;;
*)
$JAVA_AGENT "$CMD" "$@"
;;
esac
fi