| //**********************************************************************; |
| // Copyright (c) 2018, Intel Corporation |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, |
| // this list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright notice, |
| // this list of conditions and the following disclaimer in the documentation |
| // and/or other materials provided with the distribution. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| // THE POSSIBILITY OF SUCH DAMAGE. |
| //**********************************************************************; |
| |
| #include <stdarg.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| |
| #include <sapi/tpm20.h> |
| |
| #include "tpm2_error.h" |
| #include "tpm2_util.h" |
| |
| /** |
| * The maximum size of a layer name. |
| */ |
| #define TSS2_ERR_LAYER_NAME_MAX 4 |
| |
| /** |
| * The maximum size for layer specific error strings. |
| */ |
| #define TSS2_ERR_LAYER_ERROR_STR_MAX 512 |
| |
| /** |
| * Concatenates (safely) onto a static buffer given a format and varaidic |
| * arguments similar to sprintf. |
| * @param b |
| * The static buffer to concatenate onto. |
| * @param fmt |
| * The format specifier as understood by printf followed by the variadic |
| * parameters for the specifier. |
| */ |
| #define catbuf(b, fmt, ...) _catbuf(b, sizeof(b), fmt, ##__VA_ARGS__) |
| |
| /** |
| * Clears out a static buffer by setting index 0 to the null byte. |
| * @param buffer |
| * The buffer to clear out. |
| */ |
| static void clearbuf(char *buffer) { |
| buffer[0] = '\0'; |
| } |
| |
| /** |
| * Prints to a buffer using snprintf(3) using the supplied fmt |
| * and varaiadic arguments. |
| * @param buf |
| * The buffer to print into. |
| * @param len |
| * The length of that buffer. |
| * @param fmt |
| * The format string |
| * @warning |
| * DO NOT CALL DIRECTLY, use the catbuf() macro. |
| */ |
| static void COMPILER_ATTR(format (printf, 3, 4)) |
| _catbuf(char *buf, size_t len, const char *fmt, ...) { |
| va_list argptr; |
| va_start(argptr, fmt); |
| size_t offset = strlen(buf); |
| vsnprintf(&buf[offset], len - offset, fmt, argptr); |
| va_end(argptr); |
| } |
| |
| /** |
| * Retrieves the layer number. The layer number is in the 3rd |
| * octet and is thus 1 byte big. |
| * |
| * @param rc |
| * The rc to query for the layer number. |
| * @return |
| * The layer number. |
| */ |
| static inline UINT8 tss2_rc_layer_number_get(TSS2_RC rc) { |
| return ((rc & TSS2_RC_LAYER_MASK) >> TSS2_RC_LAYER_SHIFT); |
| } |
| |
| /** |
| * Queries a TPM format 1 error codes N field. The N field |
| * is a 4 bit field located at bits 8:12. |
| * @param rc |
| * The rc to query the N field for. |
| * @return |
| * The N field value. |
| */ |
| static inline UINT8 tpm2_rc_fmt1_N_get(TPM2_RC rc) { |
| return ((rc & (0xF << 8)) >> 8); |
| } |
| |
| /** |
| * Queries the index bits out of the N field contained in a TPM format 1 |
| * error code. The index bits are the low 3 bits of the N field. |
| * @param rc |
| * The TPM format 1 error code to query for the index bits. |
| * @return |
| * The index bits from the N field. |
| */ |
| static inline UINT8 tpm2_rc_fmt1_N_index_get(TPM2_RC rc) { |
| return (tpm2_rc_fmt1_N_get(rc) & 0x7); |
| } |
| |
| /** |
| * Determines if the N field in a TPM format 1 error code is |
| * a handle or not. |
| * @param rc |
| * The TPM format 1 error code to query. |
| * @return |
| * True if it is a handle, false otherwise. |
| */ |
| static inline bool tpm2_rc_fmt1_N_is_handle(TPM2_RC rc) { |
| return ((tpm2_rc_fmt1_N_get(rc) & 0x8) == 0); |
| } |
| |
| static inline UINT8 tpm2_rc_fmt1_P_get(TPM2_RC rc) { |
| return ((rc & (1 << 6)) >> 6); |
| } |
| |
| static inline UINT16 tpm2_rc_fmt1_error_get(TPM2_RC rc) { |
| return (rc & 0x3F); |
| } |
| |
| static inline UINT16 tpm2_rc_fmt0_error_get(TPM2_RC rc) { |
| return (rc & 0x7F); |
| } |
| |
| static inline UINT8 tpm2_rc_tpm_fmt0_V_get(TPM2_RC rc) { |
| return ((rc & (1 << 8)) >> 8); |
| } |
| |
| static inline UINT8 tpm2_rc_fmt0_T_get(TPM2_RC rc) { |
| return ((rc & (1 << 10)) >> 8); |
| } |
| |
| static inline UINT8 tpm2_rc_fmt0_S_get(TSS2_RC rc) { |
| return ((rc & (1 << 11)) >> 8); |
| } |
| |
| /** |
| * Helper macro for adding a layer handler to the layer |
| * registration array. |
| */ |
| #define ADD_HANDLER(name, handler) \ |
| { name, handler } |
| |
| /** |
| * Same as ADD_HANDLER but sets it to NULL. Used as a placeholder |
| * for non-registered indexes into the handler array. |
| */ |
| #define ADD_NULL_HANDLER ADD_HANDLER(NULL, NULL) |
| |
| static const char *tpm2_err_handler_fmt1(TPM2_RC rc) { |
| |
| /* |
| * format 1 error codes start at 1, so |
| * add a NULL entry to index 0. |
| */ |
| static const char *fmt1_err_strs[] = { |
| // 0x0 - EMPTY |
| NULL, |
| // 0x1 - TPM2_RC_ASYMMETRIC |
| "asymmetric algorithm not supported or not correct", |
| // 0x2 - TPM2_RC_ATTRIBUTES |
| "inconsistent attributes", |
| // 0x3 - TPM2_RC_HASH |
| "hash algorithm not supported or not appropriate", |
| // 0x4 - TPM2_RC_VALUE |
| "value is out of range or is not correct for the context", |
| // 0x5 - TPM2_RC_HIERARCHY |
| "hierarchy is not enabled or is not correct for the use", |
| // 0x6 - EMPTY |
| NULL, |
| // 0x7 - TPM2_RC_KEY_SIZE |
| "key size is not supported", |
| // 0x8 - TPM2_RC_MGF |
| "mask generation function not supported", |
| // 0x9 - TPM2_RC_MODE |
| "mode of operation not supported", |
| // 0xA - TPM2_RC_TYPE |
| "the type of the value is not appropriate for the use", |
| // 0xB - TPM2_RC_HANDLE |
| "the handle is not correct for the use", |
| // 0xC - TPM2_RC_KDF |
| "unsupported key derivation function or function not appropriate for " |
| "use", |
| // 0xD - TPM2_RC_RANGE |
| "value was out of allowed range", |
| // 0xE - TPM2_RC_AUTH_FAIL |
| "the authorization HMAC check failed and DA counter incremented", |
| // 0xF - TPM2_RC_NONCE |
| "invalid nonce size or nonce value mismatch", |
| // 0x10 - TPM2_RC_PP |
| "authorization requires assertion of PP", |
| // 0x11 - EMPTY |
| NULL, |
| // 0x12 - TPM2_RC_SCHEME |
| "unsupported or incompatible scheme", |
| // 0x13 - EMPTY |
| NULL, |
| // 0x14 - EMPTY |
| NULL, |
| // 0x15 - TPM2_RC_SIZE |
| "structure is the wrong size", |
| // 0x16 - TPM2_RC_SYMMETRIC |
| "unsupported symmetric algorithm or key size, or not appropriate for" |
| " instance", |
| // 0x17 - TPM2_RC_TAG |
| "incorrect structure tag", |
| // 0x18 - TPM2_RC_SELECTOR |
| "union selector is incorrect", |
| // 0x19 - EMPTY |
| NULL, |
| // 0x1A - TPM2_RC_INSUFFICIENT |
| "the TPM was unable to unmarshal a value because there were not enough" |
| " octets in the input buffer", |
| // 0x1B - TPM2_RC_SIGNATURE |
| "the signature is not valid", |
| // 0x1C - TPM2_RC_KEY |
| "key fields are not compatible with the selected use", |
| // 0x1D - TPM2_RC_POLICY_FAIL |
| "a policy check failed", |
| // 0x1E - EMPTY |
| NULL, |
| // 0x1F - TPM2_RC_INTEGRITY |
| "integrity check failed", |
| // 0x20 - TPM2_RC_TICKET |
| "invalid ticket", |
| // 0x21 - TPM2_RC_RESERVED_BITS |
| "reserved bits not set to zero as required", |
| // 0x22 - TPM2_RC_BAD_AUTH |
| "authorization failure without DA implications", |
| // 0x23 - TPM2_RC_EXPIRED |
| "the policy has expired", |
| // 0x24 - TPM2_RC_POLICY_CC |
| "the commandCode in the policy is not the commandCode of the command" |
| " or the command code in a policy command references a command that" |
| " is not implemented", |
| // 0x25 - TPM2_RC_BINDING |
| "public and sensitive portions of an object are not cryptographically bound", |
| // 0x26 - TPM2_RC_CURVE |
| "curve not supported", |
| // 0x27 - TPM2_RC_ECC_POINT |
| "point is not on the required curve", |
| }; |
| |
| static char buf[TSS2_ERR_LAYER_ERROR_STR_MAX + 1]; |
| |
| clearbuf(buf); |
| |
| /* Print whether or not the error is caused by a bad |
| * handle or parameter. On the case of a Handle (P == 0) |
| * then the N field top bit will be set. Un-set this bit |
| * to get the handle index by subtracting 8 as N is a 4 |
| * bit field. |
| * |
| * the lower 3 bits of N indicate index, and the high bit |
| * indicates |
| */ |
| UINT8 index = tpm2_rc_fmt1_N_index_get(rc); |
| |
| bool is_handle = tpm2_rc_fmt1_N_is_handle(rc); |
| const char *m = tpm2_rc_fmt1_P_get(rc) ? "parameter" : |
| is_handle ? "handle" : "session"; |
| catbuf(buf, "%s", m); |
| |
| if (index) { |
| catbuf(buf, "(%u):", index); |
| } else { |
| catbuf(buf, "%s", "(unk):"); |
| } |
| |
| UINT8 errnum = tpm2_rc_fmt1_error_get(rc); |
| if (errnum < ARRAY_LEN(fmt1_err_strs)) { |
| m = fmt1_err_strs[errnum]; |
| catbuf(buf, "%s", m); |
| } else { |
| catbuf(buf, "unknown error num: 0x%X", errnum); |
| } |
| |
| return buf; |
| } |
| |
| static const char *tpm2_err_handler_fmt0(TSS2_RC rc) { |
| |
| /* |
| * format 0 error codes start at 1, so |
| * add a NULL entry to index 0. |
| * Thus, no need to offset the error bits |
| * and fmt0 and fmt1 arrays can be used |
| * in-place of each other for lookups. |
| */ |
| static const char *fmt0_warn_strs[] = { |
| // 0x0 - EMPTY |
| NULL, |
| // 0x1 - TPM2_RC_CONTEXT_GAP |
| "gap for context ID is too large", |
| // 0x2 - TPM2_RC_OBJECT_MEMORY |
| "out of memory for object contexts", |
| // 0x3 - TPM2_RC_SESSION_MEMORY |
| "out of memory for session contexts", |
| // 0x4 - TPM2_RC_MEMORY |
| "out of shared object/session memory or need space for internal" |
| " operations", |
| // 0x5 - TPM2_RC_SESSION_HANDLES |
| "out of session handles", |
| // 0x6 - TPM2_RC_OBJECT_HANDLES |
| "out of object handles", |
| // 0x7 - TPM2_RC_LOCALITY |
| "bad locality", |
| // 0x8 - TPM2_RC_YIELDED |
| "the TPM has suspended operation on the command; forward progress" |
| " was made and the command may be retried", |
| // 0x9 - TPM2_RC_CANCELED |
| "the command was canceled", |
| // 0xA - TPM2_RC_TESTING |
| "TPM is performing self-tests", |
| // 0xB - EMPTY |
| NULL, |
| // 0xC - EMPTY |
| NULL, |
| // 0xD - EMPTY |
| NULL, |
| // 0xE - EMPTY |
| NULL, |
| // 0xF - EMPTY |
| NULL, |
| // 0x10 - TPM2_RC_REFERENCE_H0 |
| "the 1st handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x11 - TPM2_RC_REFERENCE_H1 |
| "the 2nd handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x12 - TPM2_RC_REFERENCE_H2 |
| "the 3rd handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x13 - TPM2_RC_REFERENCE_H3 |
| "the 4th handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x14 - TPM2_RC_REFERENCE_H4 |
| "the 5th handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x15 - TPM2_RC_REFERENCE_H5 |
| "the 6th handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x16 - TPM2_RC_REFERENCE_H6 |
| "the 7th handle in the handle area references a transient object" |
| " or session that is not loaded", |
| // 0x17 - EMPTY, |
| // 0x18 - TPM2_RC_REFERENCE_S0 |
| "the 1st authorization session handle references a session that" |
| " is not loaded", |
| // 0x19 - TPM2_RC_REFERENCE_S1 |
| "the 2nd authorization session handle references a session that" |
| " is not loaded", |
| // 0x1A - TPM2_RC_REFERENCE_S2 |
| "the 3rd authorization session handle references a session that" |
| " is not loaded", |
| // 0x1B - TPM2_RC_REFERENCE_S3 |
| "the 4th authorization session handle references a session that" |
| " is not loaded", |
| // 0x1C - TPM2_RC_REFERENCE_S4 |
| "the 5th authorization session handle references a session that" |
| " is not loaded", |
| // 0x1D - TPM2_RC_REFERENCE_S5 |
| "the 6th authorization session handle references a session that" |
| " is not loaded", |
| // 0x1E - TPM2_RC_REFERENCE_S6 |
| "the 7th authorization session handle references a session that" |
| " is not loaded", |
| // 0x20 -TPM2_RC_NV_RATE |
| "the TPM is rate-limiting accesses to prevent wearout of NV", |
| // 0x21 - TPM2_RC_LOCKOUT |
| "authorizations for objects subject to DA protection are not" |
| " allowed at this time because the TPM is in DA lockout mode", |
| // 0x22 - TPM2_RC_RETRY |
| "the TPM was not able to start the command", |
| // 0x23 - TPM2_RC_NV_UNAVAILABLE |
| "the command may require writing of NV and NV is not current" |
| " accessible", |
| }; |
| |
| /* |
| * format 1 error codes start at 0, so |
| * no need to offset the error bits. |
| */ |
| static const char *fmt0_err_strs[] = { |
| // 0x0 - TPM2_RC_INITIALIZE |
| "TPM not initialized by TPM2_Startup or already initialized", |
| // 0x1 - TPM2_RC_FAILURE |
| "commands not being accepted because of a TPM failure", |
| // 0x2 - EMPTY |
| NULL, |
| // 0x3 - TPM2_RC_SEQUENCE |
| "improper use of a sequence handle", |
| // 0x4 - EMPTY |
| NULL, |
| // 0x5 - EMPTY |
| NULL, |
| // 0x6 - EMPTY |
| NULL, |
| // 0x7 - EMPTY |
| NULL, |
| // 0x8 - EMPTY |
| NULL, |
| // 0x9 - EMPTY |
| NULL, |
| // 0xA - EMPTY |
| NULL, |
| // 0xB - TPM2_RC_PRIVATE |
| "not currently used", |
| // 0xC - EMPTY |
| NULL, |
| // 0xD - EMPTY |
| NULL, |
| // 0xE - EMPTY |
| NULL, |
| // 0xF - EMPTY |
| NULL, |
| // 0x10 - EMPTY |
| NULL, |
| // 0x11 - EMPTY |
| NULL, |
| // 0x12 - EMPTY |
| NULL, |
| // 0x13 - EMPTY |
| NULL, |
| // 0x14 - EMPTY |
| NULL, |
| // 0x15 - EMPTY |
| NULL, |
| // 0x16 - EMPTY |
| NULL, |
| // 0x17 - EMPTY |
| NULL, |
| // 0x18 - EMPTY |
| NULL, |
| // 0x19 - TPM2_RC_HMAC |
| "not currently used", |
| // 0x1A - EMPTY |
| NULL, |
| // 0x1B - EMPTY |
| NULL, |
| // 0x1C - EMPTY |
| NULL, |
| // 0x1D - EMPTY |
| NULL, |
| // 0x1E - EMPTY |
| NULL, |
| // 0x1F - EMPTY |
| NULL, |
| // 0x20 - TPM2_RC_DISABLED |
| "the command is disabled", |
| // 0x21 - TPM2_RC_EXCLUSIVE |
| "command failed because audit sequence required exclusivity", |
| // 0x22 - EMPTY |
| NULL, |
| // 0x23 - EMPTY, |
| NULL, |
| // 0x24 - TPM2_RC_AUTH_TYPE |
| "authorization handle is not correct for command", |
| // 0x25 - TPM2_RC_AUTH_MISSING |
| "command requires an authorization session for handle and it is" |
| " not present", |
| // 0x26 - TPM2_RC_POLICY |
| "policy failure in math operation or an invalid authPolicy value", |
| // 0x27 - TPM2_RC_PCR |
| "PCR check fail", |
| // 0x28 - TPM2_RC_PCR_CHANGED |
| "PCR have changed since checked", |
| // 0x29 - EMPTY |
| NULL, |
| // 0x2A - EMPTY |
| NULL, |
| // 0x2B - EMPTY |
| NULL, |
| // 0x2C - EMPTY |
| NULL, |
| // 0x2D - TPM2_RC_UPGRADE |
| "TPM is in field upgrade mode unless called via" |
| " TPM2_FieldUpgradeData(), then it is not in field upgrade mode", |
| // 0x2E - TPM2_RC_TOO_MANY_CONTEXTS |
| "context ID counter is at maximum", |
| // 0x2F - TPM2_RC_AUTH_UNAVAILABLE |
| "authValue or authPolicy is not available for selected entity", |
| // 0x30 - TPM2_RC_REBOOT |
| "a _TPM_Init and Startup(CLEAR) is required before the TPM can" |
| " resume operation", |
| // 0x31 - TPM2_RC_UNBALANCED |
| "the protection algorithms (hash and symmetric) are not reasonably" |
| " balanced. The digest size of the hash must be larger than the key" |
| " size of the symmetric algorithm.", |
| // 0x32 - EMPTY |
| NULL, |
| // 0x33 - EMPTY |
| NULL, |
| // 0x34 - EMPTY |
| NULL, |
| // 0x35 - EMPTY |
| NULL, |
| // 0x36 - EMPTY |
| NULL, |
| // 0x37 - EMPTY |
| NULL, |
| // 0x38 - EMPTY |
| NULL, |
| // 0x39 - EMPTY |
| NULL, |
| // 0x3A - EMPTY |
| NULL, |
| // 0x3B - EMPTY |
| NULL, |
| // 0x3C - EMPTY |
| NULL, |
| // 0x3D - EMPTY |
| NULL, |
| // 0x3E - EMPTY |
| NULL, |
| // 0x3F - EMPTY |
| NULL, |
| // 0x40 - EMPTY |
| NULL, |
| // 0x41 - EMPTY |
| NULL, |
| // 0x42 - TPM2_RC_COMMAND_SIZE |
| "command commandSize value is inconsistent with contents of the" |
| " command buffer; either the size is not the same as the octets" |
| " loaded by the hardware interface layer or the value is not large" |
| " enough to hold a command header", |
| // 0x43 - TPM2_RC_COMMAND_CODE |
| "command code not supported", |
| // 0x44 - TPM2_RC_AUTHSIZE |
| "the value of authorizationSize is out of range or the number of" |
| " octets in the Authorization Area is greater than required", |
| // 0x45 - TPM2_RC_AUTH_CONTEXT |
| "use of an authorization session with a context command or another" |
| " command that cannot have an authorization session", |
| // 0x46 - TPM2_RC_NV_RANGE |
| "NV offset+size is out of range", |
| // 0x47 - TPM2_RC_NV_SIZE |
| "Requested allocation size is larger than allowed", |
| // 0x48 - TPM2_RC_NV_LOCKED |
| "NV access locked", |
| // 0x49 - TPM2_RC_NV_AUTHORIZATION |
| "NV access authorization fails in command actions", |
| // 0x4A - TPM2_RC_NV_UNINITIALIZED |
| "an NV Index is used before being initialized or the state saved" |
| " by TPM2_Shutdown(STATE) could not be restored", |
| // 0x4B - TPM2_RC_NV_SPACE |
| "insufficient space for NV allocation", |
| // 0x4C - TPM2_RC_NV_DEFINED |
| "NV Index or persistent object already defined", |
| // 0x4D - EMPTY |
| NULL, |
| // 0x4E - EMPTY |
| NULL, |
| // 0x4F - EMPTY |
| NULL, |
| // 0x50 - TPM2_RC_BAD_CONTEXT |
| "context in TPM2_ContextLoad() is not valid", |
| // 0x51 - TPM2_RC_CPHASH |
| "cpHash value already set or not correct for use", |
| // 0x52 - TPM2_RC_PARENT |
| "handle for parent is not a valid parent", |
| // 0x53 - TPM2_RC_NEEDS_TEST |
| "some function needs testing", |
| // 0x54 - TPM2_RC_NO_RESULT |
| "returned when an internal function cannot process a request due to" |
| " an unspecified problem. This code is usually related to invalid" |
| " parameters that are not properly filtered by the input" |
| " unmarshaling code", |
| // 0x55 - TPM2_RC_SENSITIVE |
| "the sensitive area did not unmarshal correctly after decryption", |
| }; |
| |
| static char buf[TSS2_ERR_LAYER_ERROR_STR_MAX + 1]; |
| |
| clearbuf(buf); |
| |
| char *e = tpm2_rc_fmt0_S_get(rc) ? "warn" : "error"; |
| char *v = tpm2_rc_tpm_fmt0_V_get(rc) ? "2.0" : "1.2"; |
| catbuf(buf, "%s(%s): ", e, v); |
| |
| UINT8 errnum = tpm2_rc_fmt0_error_get(rc); |
| /* We only have version 2.0 spec codes defined */ |
| if (tpm2_rc_tpm_fmt0_V_get(rc)) { |
| /* TCG specific error code */ |
| if (tpm2_rc_fmt0_T_get(rc)) { |
| catbuf(buf, "Vendor specific error: 0x%X", errnum); |
| return buf; |
| } |
| |
| /* is it a warning (version 2 error string) or is it a 1.2 error? */ |
| size_t len = |
| tpm2_rc_fmt0_S_get(rc) ? |
| ARRAY_LEN(fmt0_warn_strs) : ARRAY_LEN(fmt0_err_strs); |
| const char **selection = |
| tpm2_rc_fmt0_S_get(rc) ? fmt0_warn_strs : fmt0_err_strs; |
| if (errnum >= len) { |
| return NULL; |
| } |
| |
| const char *m = selection[errnum]; |
| if (!m) { |
| return NULL; |
| } |
| |
| catbuf(buf, "%s", m); |
| return buf; |
| } |
| |
| catbuf(buf, "%s", "unknown version 1.2 error code"); |
| |
| return buf; |
| } |
| |
| /** |
| * Retrieves the layer field from a TSS2_RC code. |
| * @param rc |
| * The rc to query the layer index of. |
| * @return |
| * The layer index. |
| */ |
| static inline UINT8 tss2_rc_layer_format_get(TSS2_RC rc) { |
| |
| return ((rc & (1 << 7)) >> 7); |
| } |
| |
| /** |
| * Handler for tpm2 error codes. ie codes |
| * coming from the tpm layer aka layer 0. |
| * @param rc |
| * The rc to decode. |
| * @return |
| * An error string. |
| */ |
| static const char *tpm2_ehandler(TSS2_RC rc) { |
| |
| bool is_fmt_1 = tss2_rc_layer_format_get(rc); |
| |
| return is_fmt_1 ? tpm2_err_handler_fmt1(rc) : tpm2_err_handler_fmt0(rc); |
| } |
| |
| /** |
| * The default system code handler. This handles codes |
| * from the RM (itself and simlated tpm responses), the marshaling |
| * library (mu), and the tcti layers. |
| * @param rc |
| * The rc to decode. |
| * @return |
| * An error string. |
| */ |
| static const char *sys_err_handler (TSS2_RC rc) { |
| UNUSED(rc); |
| |
| /* |
| * subtract 1 from the error number |
| * before indexing into this array. |
| * |
| * Commented offsets are for the corresponding |
| * error number *before* subtraction. Ie error |
| * number 4 is at array index 3. |
| */ |
| static const char *errors[] = { |
| // 1 - TSS2_BASE_RC_GENERAL_FAILURE |
| "Catch all for all errors not otherwise specified", |
| // 2 - TSS2_BASE_RC_NOT_IMPLEMENTED |
| "If called functionality isn't implemented", |
| // 3 - TSS2_BASE_RC_BAD_CONTEXT |
| "A context structure is bad", |
| // 4 - TSS2_BASE_RC_ABI_MISMATCH |
| "Passed in ABI version doesn't match called module's ABI version", |
| // 5 - TSS2_BASE_RC_BAD_REFERENCE |
| "A pointer is NULL that isn't allowed to be NULL.", |
| // 6 - TSS2_BASE_RC_INSUFFICIENT_BUFFER |
| "A buffer isn't large enough", |
| // 7 - TSS2_BASE_RC_BAD_SEQUENCE |
| "Function called in the wrong order", |
| // 8 - TSS2_BASE_RC_NO_CONNECTION |
| "Fails to connect to next lower layer", |
| // 9 - TSS2_BASE_RC_TRY_AGAIN |
| "Operation timed out; function must be called again to be completed", |
| // 10 - TSS2_BASE_RC_IO_ERROR |
| "IO failure", |
| // 11 - TSS2_BASE_RC_BAD_VALUE |
| "A parameter has a bad value", |
| // 12 - TSS2_BASE_RC_NOT_PERMITTED |
| "Operation not permitted.", |
| // 13 - TSS2_BASE_RC_INVALID_SESSIONS |
| "Session structures were sent, but command doesn't use them or doesn't" |
| " use the specified number of them", |
| // 14 - TSS2_BASE_RC_NO_DECRYPT_PARAM |
| "If function called that uses decrypt parameter, but command doesn't" |
| " support decrypt parameter.", |
| // 15 - TSS2_BASE_RC_NO_ENCRYPT_PARAM |
| "If function called that uses encrypt parameter, but command doesn't" |
| " support decrypt parameter.", |
| // 16 - TSS2_BASE_RC_BAD_SIZE |
| "If size of a parameter is incorrect", |
| // 17 - TSS2_BASE_RC_MALFORMED_RESPONSE |
| "Response is malformed", |
| // 18 - TSS2_BASE_RC_INSUFFICIENT_CONTEXT |
| "Context not large enough", |
| // 19 - TSS2_BASE_RC_INSUFFICIENT_RESPONSE |
| "Response is not long enough", |
| // 20 - TSS2_BASE_RC_INCOMPATIBLE_TCTI |
| "Unknown or unusable TCTI version", |
| // 21 - TSS2_BASE_RC_NOT_SUPPORTED |
| "Functionality not supported", |
| // 22 - TSS2_BASE_RC_BAD_TCTI_STRUCTURE |
| "TCTI context is bad" |
| }; |
| |
| return (rc - 1u < ARRAY_LEN(errors)) ? errors[rc - 1u] : NULL; |
| } |
| |
| |
| static struct { |
| const char *name; |
| tpm2_error_handler handler; |
| } layer_handler[TPM2_ERROR_TSS2_RC_LAYER_COUNT] = { |
| ADD_HANDLER("tpm" , tpm2_ehandler), |
| ADD_NULL_HANDLER, // layer 1 is unused |
| ADD_NULL_HANDLER, // layer 2 is unused |
| ADD_NULL_HANDLER, // layer 3 is unused |
| ADD_NULL_HANDLER, // layer 4 is unused |
| ADD_NULL_HANDLER, // layer 5 is unused |
| ADD_NULL_HANDLER, // layer 6 is the feature rc |
| ADD_HANDLER("fapi", NULL), // layer 7 is the esapi rc |
| ADD_HANDLER("sys", sys_err_handler), // layer 8 is the sys rc |
| ADD_HANDLER("mu", sys_err_handler), // layer 9 is the mu rc |
| // Defaults to the system handler |
| ADD_HANDLER("tcti", sys_err_handler), // layer 10 is the tcti rc |
| // Defaults to the system handler |
| ADD_HANDLER("rmt", tpm2_ehandler), // layer 11 is the resource manager TPM RC |
| // The RM usually duplicates TPM responses |
| // So just default the handler to tpm2. |
| ADD_HANDLER("rm", NULL), // layer 12 is the rm rc |
| ADD_HANDLER("drvr", NULL), // layer 13 is the driver rc |
| }; |
| |
| /** |
| * Determines if the layer allowed to be registered to. |
| * @param layer |
| * The layer to determine handler assignment eligibility of. |
| * @return |
| * True if it is reserved and thus non-assignable, false otherwise. |
| */ |
| static bool is_reserved_layer(UINT8 layer) { |
| return layer == 0; |
| } |
| |
| /** |
| * If a layer has no handler registered, default to this |
| * handler that prints the error number in hex. |
| * @param rc |
| * The rc to print the error number of. |
| * @return |
| * The string. |
| */ |
| static const char *unkown_layer_handler(TSS2_RC rc) { |
| UNUSED(rc); |
| |
| static char buf[32]; |
| |
| clearbuf(buf); |
| catbuf(buf, "0x%X", tpm2_error_get(rc)); |
| |
| return buf; |
| } |
| |
| /** |
| * Register or unregister a custom layer error handler. |
| * @param layer |
| * The layer in which to register a handler for. It is an error |
| * to register for the following reserved layers: |
| * - TSS2_TPM_RC_LAYER - layer 0 |
| * - TSS2_SYS_RC_LAYER - layer 8 |
| * - TSS2_MU_RC_LAYER - layer 9 |
| * - TSS2_TCTI_RC_LAYER - layer 10 |
| * @param name |
| * A friendly layer name. It is an error for the name to be of |
| * length 0 or greater than 4. |
| * @param handler |
| * The handler function to register or NULL to unregister. |
| * @return |
| * True on success or False on error. |
| */ |
| bool tpm2_error_set_handler(UINT8 layer, const char *name, |
| tpm2_error_handler handler) { |
| |
| /* don't allow setting reserved layers */ |
| if (is_reserved_layer(layer)) { |
| return false; |
| } |
| |
| /* |
| * if they are clearing the handler, name doesn't matter |
| * clear it too. |
| */ |
| if (!handler) { |
| name = NULL; |
| } |
| |
| /* Perform a zero and max-name length check if name is being set */ |
| if (name) { |
| size_t len = name ? strlen(name) : 0; |
| if (!len || len > TSS2_ERR_LAYER_NAME_MAX) |
| return false; |
| } |
| |
| layer_handler[layer].handler = handler; |
| layer_handler[layer].name = name; |
| |
| return true; |
| } |
| |
| const char * tpm2_error_str(TSS2_RC rc) { |
| |
| static char buf[TSS2_ERR_LAYER_NAME_MAX + TSS2_ERR_LAYER_ERROR_STR_MAX + 1]; |
| |
| clearbuf(buf); |
| |
| UINT8 layer = tss2_rc_layer_number_get(rc); |
| |
| tpm2_error_handler handler = layer_handler[layer].handler; |
| const char *lname = layer_handler[layer].name; |
| |
| if (lname) { |
| catbuf(buf, "%s:", lname); |
| } else { |
| catbuf(buf, "%u:", layer); |
| } |
| |
| handler = !handler ? unkown_layer_handler : handler; |
| |
| // Handlers only need the error bits. This way they don't |
| // need to concern themselves with masking off the layer |
| // bits or anything else. |
| UINT16 err_bits = tpm2_error_get(rc); |
| const char *e = err_bits ? handler(err_bits) : "success"; |
| if (e) { |
| catbuf(buf, "%s", e); |
| } else { |
| catbuf(buf, "0x%X", err_bits); |
| } |
| |
| return buf; |
| } |