csit/scripts/common_functions.sh

#!/bin/bash

# Copyright 2016-2017 Huawei Technologies Co., Ltd.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

function memory_details(){
    #General memory details
    echo "> top -bn1 | head -3"
    top -bn1 | head -3
    echo

    echo "> free -h"
    free -h
    echo

    #Memory details per Docker
    echo "> docker ps"
    docker ps
    echo

    echo "> docker stats --no-stream"
    docker stats --no-stream
    echo
}
function fibonacci_number(){
    set +x
    if [ $1 -le 1 ]
    then
        echo "1"
    elif [ $1 -le 10 ]
    then
        Num=$1
        f1=0
        f2=1
        fn=-1
        for i in `eval echo {1..$Num}`;do
            fn=$((f1+f2))
            f1=$f2
            f2=$fn
        done
        echo $fn
    else
        echo "30"
    fi
}
function wait_curl_driver(){
    #Parameters:
    #CURL_COMMAND - the URL on which the curl command will be executed
    #GREP_STRING - Desired string to be found inside the body response of the
    #              previous curl command
    #EXCLUDE_STRING - If the filtered string (GREP_STRING) must not exist in
    #                 the body response of the curl
    #WAIT_MESSAGE - the message to be displayed for logging purpose. (optional)
    #REPEAT_NUMBER - the maximum number of tries before abandoning the curl
    #                command (optional, by default = 15)
    #MAX_TIME - Maximum time allowed for the transfer (in seconds)
    #STATUS_CODE - A HTTP status code desired to be found by getting the link
    #  /!\ IMPORTANT NOTICE: the usage of STATUS_CODE option turn GREP_STRING/
    #  /!\ EXCLUDE_STRING/and the MAX_TIME options becomes obsolete with no
    #  /!\ execution impact
    #MEMORY_USAGE - If Parameters exists shows the memory usage after curl
    #               execution(s)

    repeat_max=15
    parameters="$@"

    #WAIT_MESSAGE
    if [[ $parameters == *"WAIT_MESSAGE"* ]]
    then
        wait_message=`echo $parameters | sed -e "s/.*WAIT_MESSAGE=//g"`
        wait_message=`echo $wait_message | sed -e "s/ .*//g"`
    else
        wait_message="wait ..."
    fi

    #REPEAT_NUMBER
    if [[ $parameters == *"REPEAT_NUMBER"* ]]
    then
        repeat_max=`echo $parameters | sed -e "s/.*REPEAT_NUMBER=//g"`
        repeat_max=`echo $repeat_max | sed -e "s/ .*//g"`
    fi

    #CURL_COMMAND
    if [[ $parameters == *"CURL_COMMAND"* ]]
    then
        curl_command=`echo $parameters | sed -e 's/.*CURL_COMMAND=//g'`
        curl_command=`echo $curl_command | sed -e 's/ .*//g'`
    else
        echo "-Curl is empty-"  # Or no parameterseter passed.
        return 0
    fi

    #MAX_TIME
    if [[ $parameters == *"MAX_TIME"* ]]
    then
        max_time=`echo $parameters | sed -e 's/.*MAX_TIME=//g'`
        max_time=`echo $max_time | sed -e 's/ .*//g'`
    else
        max_time="5"
    fi

    exclude_string=""
    #EXCLUDE_STRING
    if [[ $parameters == *"EXCLUDE_STRING"* ]]
    then
        exclude_string="-v"
    fi

    status_code=""
    #STATUS_CODE
    if [[ $parameters == *"STATUS_CODE"* ]]
    then
        status_code=`echo $parameters | sed -e 's/.*STATUS_CODE=//g'`
        status_code=`echo $status_code | sed -e 's/ .*//g'`
    fi

    for i in `eval echo {1..$repeat_max}`; do
        response_code=`curl -o /dev/null --silent --head --write-out '%{http_code}' $curl_command`
        echo "..."
        if [[ ! -z $status_code ]] ; then
            if [ "$status_code" -eq "$response_code" ]
            then
                echo "SUCCESS:Actual Status code <$response_code> match the expected code <$status_code>"
                return 0
            else
                echo "WARNING:Expected <$status_code> but Actual <$response_code>"
            fi
        else
            #GREP_STRING
            if [[ $parameters == *"GREP_STRING"* ]]
            then
                grep_command=`echo $parameters | sed -e 's/.*GREP_STRING=//g'`
                grep_command=`echo $grep_command | sed -e 's/ REPEAT_NUMBER=.*//g' | sed -e 's/ CURL_COMMAND=.*//g' | sed -e 's/ WAIT_MESSAGE=.*//g' | sed -e 's/ MAX_TIME=.*//g' | sed -e 's/ EXCLUDE_STRING.*//g'`
            else
                echo "-Grep_command is empty-"  # Or no parameters passed.
                return 0
            fi

            str=`curl -sS -m$max_time $curl_command | grep "$grep_command"`
            echo "BODY::$str"
            if [[ ! -z $exclude_string ]]
            then
                if [[ -z $str ]]
                then
                    echo "SUCCESS: body response does not contains '$grep_command'";
                    break;
                else
                    echo "Fall_Short: Body response still contains '$grep_command'"
                fi
            else
                if [[ ! -z $str ]]
                then
                    echo "SUCCESS: body response contains '$grep_command'";
                break;
                else
                    echo "Fall_Short: Element '$grep_command' not found yet # "$i""
                fi
            fi

            if [ "$?" = "7" ]; then
                echo 'Connection refused or can not connect to server/proxy';
                str=''
            fi
        fi
        seconds2sleep=`fibonacci_number $i`
        echo $wait_message
        echo "Iteration::$i out of $repeat_max "
        echo "Quiet time for $seconds2sleep seconds ..."
        sleep $seconds2sleep

	# if waiting for a long time, log system load
	if [ $i -gt 45 ]
	then
            memory_details
	fi
    done
    #MEMORY_USAGE
    if [[ $parameters == *"MEMORY_USAGE"* ]]
    then
        echo "==========================MEMORY USAGE=================================="
        memory_details
        echo "========================================================================"
    fi
    return 0
}

function run_simulator ()
{
   run_robottestlib
   run_simulator_docker $1
}

function run_robottestlib ()
{
    #Start the robottest REST library if not started
    if ! pgrep -f robottest > /dev/null
    then
        #Download the latest robottest jar
        wget -q -O  ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar  "https://nexus.open-o.org/service/local/artifact/maven/redirect?r=snapshots&g=org.openo.integration&a=org.openo.robottest&e=jar&v=LATEST"
        chmod +x  ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar
        eval `java -cp ${SCRIPTS}/integration/mockserver/org.openo.robottest.jar  org.openo.robot.test.robottest.MyRemoteLibrary` &
    fi
}

function run_simulator_docker ()
{
    #Start the simulator docker if not started
    SIMULATOR_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' simulator`
    if [[ -z $SIMULATOR_IP ]]
    then
        echo "Starting simulator docker..."
        SIMULATOR_JSON=$1
        if [[ -z $SIMULATOR_JSON ]]
        then
            SIMULATOR_JSON=main.json
        fi
        docker run -d -i -t --name simulator -e SIMULATOR_JSON=$SIMULATOR_JSON -p 18009:18009 -p 18008:18008  openoint/simulate-test-docker
        SIMULATOR_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' simulator`
    fi

    #Set the simulator IP in robot variables
    ROBOT_VARIABLES=${ROBOT_VARIABLES}" -v SIMULATOR_IP:${SIMULATOR_IP}  -v SCRIPTS:${SCRIPTS}"
    echo ${ROBOT_VARIABLES}
}

function get_docker_compose_service ()
{
    local service=$1
    local compose_file=${2:-docker-compose.yml}

    echo $(docker-compose --file ./${compose_file} ps | grep $service |  cut -d " " -f1 )
}

function bypass_ip_adress ()
{
    local ip_address=$1

    if [[ $no_proxy && $no_proxy != *$ip_address* ]]; then
        export no_proxy=$no_proxy,$ip_address
    fi
}

function wait_for_service_init ()
{
    local service_url=$1

    for delay in {1..50}; do
        curl -sS ${service_url} && break
        echo "$delay - Waiting for $service_url..."
        sleep $delay
    done
}