docs/guides/onap-developer/how-to-use-docs/include-documentation.rst - onap/doc - Gitiles

 .. This work is licensed under a Creative Commons Attribution 4.0
 .. International License. http://creativecommons.org/licenses/by/4.0
 .. Copyright 2017 AT&T Intellectual Property.  All rights reserved.


 Setting Up
 ==========

 Some initial set up is required to connect a project with
 the master document structure and enable automated publishing of
 changes as summarized in the following diagram and description below
 below.

 .. seqdiag::
    :height: 700
    :width: 1000

    seqdiag {
      DA [label = "Doc Project\nAuthor/Committer",   color=lightblue];
      DR [label = "Doc Gerrit Repo" ,                     color=pink];
      PR [label = "Other Project\nGerrit Repo",          color=pink ];
      PA [label = "Other Project\nAuthor/Committer", color=lightblue];

      PA  ->   DR [label = "Add project repo as\ngit submodule" ];
      DR  ->   DA [label = "Review & Plan to\nIntegrate Content with\nTocTree Structure" ];
      DR  <--  DA [label = "Vote +2/Merge" ];
      PA  <--  DR [label = "Merge Notification" ];
      PA  ->   PR [label = "Create in project repo\ntop level directory and index.rst" ];
      PR  ->   DA [label = "Add as Reviewer" ];
      PR  <--  DA [label = "Approve and Integrate" ];
      PA  <--  PR [label = "Merge" ];
      }

 Setup project repositories(s)
 -----------------------------
 These steps are performed for each project repository that
 provides documentation.

 First let's set two variables that will be used in the subsequent steps.
 Set *reponame* to the project repository you are setting up
 just as it appears in the **Project Name** column of
 the Gerrit projects page.
 Set *lfid* to your Linux Foundation identity that you use to
 login to gerrit or for git clone requests over ssh.

 .. code-block:: bash

    reponame=
    lfid=

 The next step is to add a directory in the doc project where your
 project will be included as a submodule and at least one reference
 from the doc project to the documentation index in your repository.
 The following sequence will do this over ssh.

 .. caution::

    If your access network restricts ssh, you will need to use equivalent
    git commands and HTTP Passwords as described `here <http://wiki.onap.org/x/X4AP>`_.

 .. code-block:: bash

    git clone ssh://$lfid@gerrit.onap.org:29418/doc
    cd doc
    mkdir -p `dirname docs/submodules/$reponame`
    git submodule add ../$reponame docs/submodules/$reponame.git
    git submodule init docs/submodules/$reponame.git
    git submodule update docs/submodules/$reponame.git

    echo "   $reponame <../submodules/$reponame.git/docs/index>" >> docs/release/repolist.rst

    git add .
    git commit -s
    git review

 .. caution::
    Wait for the above change to be merged before any merge to the
    project repository that you have just added as a submodule.
    If the project repository added as submodule changes before the
    doc project merge, git may not automatically update the submodule
    reference on changes and/or the verify job will fail in the step below.


 The last step is to create a docs directory in your repository with
 an index.rst file.  The following sequence will complete the minimum
 required over ssh.  As you have time to convert or add new content you
 can update the index and add files under the docs folder.

 .. hint::
    If you have additional content, you can include it by editing the
    index.rst file and/or adding other files before the git commit.
    See `Templates and Examples`_ below and :ref:`converting-to-rst`
    for more information.


 .. code-block:: bash

    git clone ssh://$lfid@gerrit.onap.org:29418/$reponame
    cd $reponame
    mkdir docs
    echo ".. This work is licensed under a Creative Commons Attribution 4.0 International License.

    TODO Add files to toctree and delete this header
    ------------------------------------------------
    .. toctree::
       :maxdepth: 1

    " >  docs/index.rst

    git add .
    git commit -s
    git review


 The diagram below illustrates what is accomplished in the setup steps
 above from the perspective of a file structure created for a local test,
 a jenkins verify job, and/or published release documentation including:

 - ONAP gerrit project repositories,

 - doc project repository master document index.rst, templates,
   configuration, and other documents

 - submodules directory where other project repositories and
   directories/files are referenced

 - file structure: directories (ellipses), files(boxes)

 - references: directory/files (solid edges), git submodule
   (dotted edges), sphinx toctree (dashed edges)

 .. graphviz::


    digraph docstructure {
    size="8,12";
    node [fontname = "helvetica"];
    // Align gerrit repos and docs directories
    {rank=same doc aaf aai reponame repoelipse vnfsdk vvp}
    {rank=same confpy release templates masterindex submodules otherdocdocumentelipse}
    {rank=same releasedocumentindex releaserepolist}

    //Illustrate Gerrit Repos and provide URL/Link for complete repo list
    gerrit [label="gerrit.onap.org/r", href="https://gerrit.onap.org/r/#/admin/projects/" ];
    doc [href="https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree"];
    gerrit -> doc;
    gerrit -> aaf;
    gerrit -> aai;
    gerrit -> reponame;
    gerrit -> repoelipse;
              repoelipse [label=". . . ."];
    gerrit -> vnfsdk;
    gerrit -> vvp;

    //Show example of local reponame instance of component info
    reponame -> reponamedocsdir;
    reponamesm -> reponamedocsdir;
                     reponamedocsdir [label="docs"];
    reponamedocsdir -> repnamedocsdirindex;
                          repnamedocsdirindex [label="index.rst", shape=box];

    //Show detail structure of a portion of doc/docs
    doc  -> docs;
    docs -> confpy;
            confpy [label="conf.py",shape=box];
    docs -> masterindex;
            masterindex [label="Master\nindex.rst", shape=box];
    docs -> release;
    docs -> templates;
    docs -> otherdocdocumentelipse;
            otherdocdocumentelipse [label="...other\ndocuments"];
    docs -> submodules

    masterindex -> releasedocumentindex [style=dashed, label="sphinx\ntoctree\nreference"];

    //Show submodule linkage to docs directory
    submodules -> reponamesm [style=dotted,label="git\nsubmodule\nreference"];
                  reponamesm [label="reponame.git"];

    //Example Release document index that references component info provided in other project repo
    release -> releasedocumentindex;
               releasedocumentindex [label="index.rst", shape=box];
    releasedocumentindex -> releaserepolist [style=dashed, label="sphinx\ntoctree\nreference"];
         releaserepolist  [label="repolist.rst", shape=box];
    release -> releaserepolist;
    releaserepolist -> repnamedocsdirindex [style=dashed, label="sphinx\ntoctree\nreference"];

    }

 Branches in the DOC Project
 ---------------------------

 The DOC project 'master' branch aggregates the 'latest' content
 from all ONAP project repositories contributing documentation into a
 single tree file structure as described in the previous section.  This
 branch is continuously integrated and deployed at Read The
 Docs as the 'latest' ONAP Documentation by:

 * Jenkins doc-verify-rtd and doc-merge-rtd jobs triggered whenever patches on
   contributing repositories contain rst files at or below a top level
   'docs' folder.

 * Subscription in the DOC project to changes in submodule repositories.
   These changes appear in the DOC project as commits with title
   'Updated git submodules' when a change to a contributing project
   repository is merged.  No DOC project code review occurs, only a
   submodule repository commit hash is updated to track the head of each
   contributing master branch.

 For each ONAP named release the DOC project creates a branch with the
 release name.  The timing of the release branch is determined by
 work needed in the DOC project to prepare the release branch and the
 amount of change unrelated to the release in the master branch.
 For example contributing projects that create named release branches
 early to begin work on the next release and/or contributing projects
 to the master that are not yet part of the named release would result
 in an earlier named release branch to cleanly separate work to stabilize
 a release from other changes in the master branch.

 A named release branch is integrated and deployed at Read The Docs
 as the 'named release' by aggregating content from contributing
 project repositories.  A contributing project repository can
 choose one of the following for the 'named release' branch:

 * Remove the contributing project repository submodule and RST
   references when not part of the named release.

 * Provide a commit hash or tag for the contributing project master
   branch to be used for the life of the release branch or until a
   request is submitted to change the commit hash or tag.

 * Provide the commit hash for the head of a named release branch
   created in the contributing project repository.  This option
   may be appropriate if frequent changes are expected over the
   life of the named release and work the same way as the continuous
   integration and deployment described for the master branch.

 The decision on option for each contributing project repository
 can be made or changed before the final release is approved.  The
 amount of change and expected differences between master and a
 named release branch for each repository should drive the choice of
 option and timing.

 About GIT branches
 ------------------

 GIT is a powerful tool allowing many actions, but without respecting some rules
 the GIT structure can be quickly hard to maintain.

 Here are some conventions about GIT branches:

   - ALWAYS create a local branch to edit or create any file. This local branch
     will be considered as a topic in Gerrit and allow contributors to
     work at the same time on the same project.

   - 1 feature = 1 branch. In the case of documentation, a new chapter
     or page about a new code feature can be considered as a 'doc feature'

   - 1 bug = 1 branch. In the case of documentation, a correction on an
     existing sentence can be considered as a 'doc bug'

   - the master branch is considered as "unstable", containing new features that
     will converge to a stable situation for the release date.

 The day of the release, the repository owner will create a new branch to
 fix the code and documentation. This will represent the 'stable' code of the
 release. In this context:

   - NEVER push a new feature on a stable branch

   - Only bug correction are authorized on a stable branch using
     cherry pick method

 .. image:: git_branches.png

 Creating Restructured Text
 ==========================

 Templates and Examples
 ----------------------
 Templates are available that capture the kinds of information
 useful for different types of projects and provide some examples of
 restructured text.  We organize templates in the following way to:

  - help authors understand relationships between documents

  - keep the user audience context in mind when writing and

  - tailor sections for different kinds of projects.


 **Sections** Represent a certain type of content. A section
 is **provided** in an project repository, to describe something about
 the characteristics, use, capability, etc. of things in that repository.
 A section may also be **referenced** from other sections and in
 other repositories.  For example, an API specification provided in a project
 repository might be referenced to in a Platform API Reference Guide.
 The notes in the beginning of each section template provide
 additional detail about what is typically covered and where
 there may be references to the section.

 **Collections** Are a set of sections that are typically provided
 for a particular type of project, repository, guide, reference manual, etc.
 For example, a collection for a platform component, an SDK, etc.

 You can: browse the template *collections* and *sections* below;
 show source to look at the Restructured Text and Sphinx directives used;
 copy the source either from a browser window or by downloading the
 file in raw form from
 the `gerrit doc repository <https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree;f=docs/templates;/>`_ and
 then add them to your repository docs folder and index.rst.


 Sections
 ++++++++

 .. toctree::
    :maxdepth: 1
    :glob:

    ../../../templates/sections/*


 Collections
 +++++++++++

 .. toctree::
    :maxdepth: 1
    :glob:

    ../../../templates/collections/*


 In addition to these simple templates and examples
 there are many open source projects (e.g. Open Daylight, Open Stack)
 that are using Sphinx and Readthedocs where you may find examples
 to start with.  Working with project teams we will continue to enhance
 templates here and capture frequently asked questions on the developer
 wiki question topic `documentation <https://wiki.onap.org/questions/topics/16384055/documentation>`_.

 Each project should:

  - decide what is relevant content

  - determine the best way to create/maintain it in the CI/CD process and

  - work with the documentation team to reference content from the
    master index and guides.

 Consider options including filling in a template, identifying existing
 content that can be used as is or easily converted, and use of Sphinx
 directives/extensions to automatically generate restructured text
 from other source you already have.

 Links and References
 --------------------
 It's pretty common to want to reference another location in the
 ONAP documentation and it's pretty easy to do with
 reStructuredText. This is a quick primer, more information is in the
 `Sphinx section on Cross-referencing arbitrary locations
 <http://www.sphinx-doc.org/en/stable/markup/inline.html#ref-role>`_.

 Within a single document, you can reference another section simply by::

    This is a reference to `The title of a section`_

 Assuming that somewhere else in the same file there a is a section
 title something like::

    The title of a section
    ^^^^^^^^^^^^^^^^^^^^^^

 It's typically better to use ``:ref:`` syntax and labels to provide
 links as they work across files and are resilient to sections being
 renamed. First, you need to create a label something like::

    .. _a-label:

    The title of a section
    ^^^^^^^^^^^^^^^^^^^^^^

 .. note:: The underscore (_) before the label is required.

 Then you can reference the section anywhere by simply doing::

     This is a reference to :ref:`a-label`

 or::

     This is a reference to :ref:`a section I really liked <a-label>`

 .. note:: When using ``:ref:``-style links, you don't need a trailing
           underscore (_).

 Because the labels have to be unique, it usually makes sense to prefix
 the labels with the project name to help share the label space, e.g.,
 ``sfc-user-guide`` instead of just ``user-guide``.

 Testing
 =======

 One RST File
 ------------
 It is recommended that all rst content is validated by `doc8 <https://pypi.python.org/pypi/doc8>`_ standards.
 To validate your rst files using doc8, install doc8.

 .. code-block:: bash

    sudo pip install doc8

 doc8 can now be used to check the rst files. Execute as,

 .. code-block:: bash

    doc8 --ignore D000,D001 <file>


 One Project
 -----------
 To test how the documentation renders in HTML, follow these steps:

 Install virtual environment.

 .. code-block:: bash

    sudo pip install virtualenv
    cd /local/repo/path/to/project

 Download the doc repository.

 .. code-block:: bash

    git clone http://gerrit.onap.org/r/doc

 Change directory to doc & install requirements.

 .. code-block:: bash

    cd doc
    sudo pip install -r etc/requirements.txt

 Move the conf.py file to your project folder where RST files have been kept:

 .. code-block:: bash

    mv doc/docs/conf.py <path-to-your-folder>/

 Move the static files to your project folder:

 .. code-block:: bash

    mv docs/_static/ <path-to-your-folder>/

 Build the documentation from within your project folder:

 .. code-block:: bash

    sphinx-build -b html <path-to-your-folder> <path-to-output-folder>

 Your documentation shall be built as HTML inside the
 specified output folder directory.

 .. note:: Be sure to remove the `conf.py`, the static/ files and the output folder from the `<project>/docs/`. This is for testing only. Only commit the rst files and related content.

 .. _building-all-documentation:

 All Documentation
 -----------------
 To build the all documentation under doc/, follow these steps:

 Install virtual environment.

 .. code-block:: bash

    sudo pip install virtualenv
    cd /local/repo/path/to/project

 Download the DOC repository.

 .. code-block:: bash

    git clone http://gerrit.onap.org/r/doc

 Build documentation using tox local environment & then open using any browser.

 .. code-block:: bash

    cd doc
    tox -elocal
    firefox docs/_build/html/index.html

 .. note:: Make sure to run `tox -elocal` and not just `tox`.
    This updates all submodule repositories that are integrated
    by the doc project.

 There are additional tox environment options for checking External
 URLs and Spelling.  Use the tox environment options below and then
 look at the output with the Linux `more` or similar command
 scan for output that applies to the files you are validating.

 .. code-block:: bash

    tox -elinkcheck
    more <  docs/_build/linkcheck/output.txt

    tox -espellcheck
    more <  docs/_build/spellcheck/output.txt
	.. This work is licensed under a Creative Commons Attribution 4.0
	.. International License. http://creativecommons.org/licenses/by/4.0
	.. Copyright 2017 AT&T Intellectual Property. All rights reserved.


	Setting Up
	==========

	Some initial set up is required to connect a project with
	the master document structure and enable automated publishing of
	changes as summarized in the following diagram and description below
	below.

	.. seqdiag::
	:height: 700
	:width: 1000

	seqdiag {
	DA [label = "Doc Project\nAuthor/Committer", color=lightblue];
	DR [label = "Doc Gerrit Repo" , color=pink];
	PR [label = "Other Project\nGerrit Repo", color=pink ];
	PA [label = "Other Project\nAuthor/Committer", color=lightblue];

	PA -> DR [label = "Add project repo as\ngit submodule" ];
	DR -> DA [label = "Review & Plan to\nIntegrate Content with\nTocTree Structure" ];
	DR <-- DA [label = "Vote +2/Merge" ];
	PA <-- DR [label = "Merge Notification" ];
	PA -> PR [label = "Create in project repo\ntop level directory and index.rst" ];
	PR -> DA [label = "Add as Reviewer" ];
	PR <-- DA [label = "Approve and Integrate" ];
	PA <-- PR [label = "Merge" ];
	}

	Setup project repositories(s)
	-----------------------------
	These steps are performed for each project repository that
	provides documentation.

	First let's set two variables that will be used in the subsequent steps.
	Set reponame to the project repository you are setting up
	just as it appears in the Project Name column of
	the Gerrit projects page.
	Set lfid to your Linux Foundation identity that you use to
	login to gerrit or for git clone requests over ssh.

	.. code-block:: bash

	reponame=
	lfid=

	The next step is to add a directory in the doc project where your
	project will be included as a submodule and at least one reference
	from the doc project to the documentation index in your repository.
	The following sequence will do this over ssh.

	.. caution::

	If your access network restricts ssh, you will need to use equivalent
	git commands and HTTP Passwords as described `here <http://wiki.onap.org/x/X4AP>`_.

	.. code-block:: bash

	git clone ssh://$lfid@gerrit.onap.org:29418/doc
	cd doc
	mkdir -p `dirname docs/submodules/$reponame`
	git submodule add ../$reponame docs/submodules/$reponame.git
	git submodule init docs/submodules/$reponame.git
	git submodule update docs/submodules/$reponame.git

	echo " $reponame <../submodules/$reponame.git/docs/index>" >> docs/release/repolist.rst

	git add .
	git commit -s
	git review

	.. caution::
	Wait for the above change to be merged before any merge to the
	project repository that you have just added as a submodule.
	If the project repository added as submodule changes before the
	doc project merge, git may not automatically update the submodule
	reference on changes and/or the verify job will fail in the step below.


	The last step is to create a docs directory in your repository with
	an index.rst file. The following sequence will complete the minimum
	required over ssh. As you have time to convert or add new content you
	can update the index and add files under the docs folder.

	.. hint::
	If you have additional content, you can include it by editing the
	index.rst file and/or adding other files before the git commit.
	See `Templates and Examples`_ below and :ref:`converting-to-rst`
	for more information.


	.. code-block:: bash

	git clone ssh://$lfid@gerrit.onap.org:29418/$reponame
	cd $reponame
	mkdir docs
	echo ".. This work is licensed under a Creative Commons Attribution 4.0 International License.

	TODO Add files to toctree and delete this header
	------------------------------------------------
	.. toctree::
	:maxdepth: 1

	" > docs/index.rst

	git add .
	git commit -s
	git review


	The diagram below illustrates what is accomplished in the setup steps
	above from the perspective of a file structure created for a local test,
	a jenkins verify job, and/or published release documentation including:

	- ONAP gerrit project repositories,

	- doc project repository master document index.rst, templates,
	configuration, and other documents

	- submodules directory where other project repositories and
	directories/files are referenced

	- file structure: directories (ellipses), files(boxes)

	- references: directory/files (solid edges), git submodule
	(dotted edges), sphinx toctree (dashed edges)

	.. graphviz::


	digraph docstructure {
	size="8,12";
	node [fontname = "helvetica"];
	// Align gerrit repos and docs directories
	{rank=same doc aaf aai reponame repoelipse vnfsdk vvp}
	{rank=same confpy release templates masterindex submodules otherdocdocumentelipse}
	{rank=same releasedocumentindex releaserepolist}

	//Illustrate Gerrit Repos and provide URL/Link for complete repo list
	gerrit [label="gerrit.onap.org/r", href="https://gerrit.onap.org/r/#/admin/projects/" ];
	doc [href="https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree"];
	gerrit -> doc;
	gerrit -> aaf;
	gerrit -> aai;
	gerrit -> reponame;
	gerrit -> repoelipse;
	repoelipse [label=". . . ."];
	gerrit -> vnfsdk;
	gerrit -> vvp;

	//Show example of local reponame instance of component info
	reponame -> reponamedocsdir;
	reponamesm -> reponamedocsdir;
	reponamedocsdir [label="docs"];
	reponamedocsdir -> repnamedocsdirindex;
	repnamedocsdirindex [label="index.rst", shape=box];

	//Show detail structure of a portion of doc/docs
	doc -> docs;
	docs -> confpy;
	confpy [label="conf.py",shape=box];
	docs -> masterindex;
	masterindex [label="Master\nindex.rst", shape=box];
	docs -> release;
	docs -> templates;
	docs -> otherdocdocumentelipse;
	otherdocdocumentelipse [label="...other\ndocuments"];
	docs -> submodules

	masterindex -> releasedocumentindex [style=dashed, label="sphinx\ntoctree\nreference"];

	//Show submodule linkage to docs directory
	submodules -> reponamesm [style=dotted,label="git\nsubmodule\nreference"];
	reponamesm [label="reponame.git"];

	//Example Release document index that references component info provided in other project repo
	release -> releasedocumentindex;
	releasedocumentindex [label="index.rst", shape=box];
	releasedocumentindex -> releaserepolist [style=dashed, label="sphinx\ntoctree\nreference"];
	releaserepolist [label="repolist.rst", shape=box];
	release -> releaserepolist;
	releaserepolist -> repnamedocsdirindex [style=dashed, label="sphinx\ntoctree\nreference"];

	}

	Branches in the DOC Project
	---------------------------

	The DOC project 'master' branch aggregates the 'latest' content
	from all ONAP project repositories contributing documentation into a
	single tree file structure as described in the previous section. This
	branch is continuously integrated and deployed at Read The
	Docs as the 'latest' ONAP Documentation by:

	* Jenkins doc-verify-rtd and doc-merge-rtd jobs triggered whenever patches on
	contributing repositories contain rst files at or below a top level
	'docs' folder.

	* Subscription in the DOC project to changes in submodule repositories.
	These changes appear in the DOC project as commits with title
	'Updated git submodules' when a change to a contributing project
	repository is merged. No DOC project code review occurs, only a
	submodule repository commit hash is updated to track the head of each
	contributing master branch.

	For each ONAP named release the DOC project creates a branch with the
	release name. The timing of the release branch is determined by
	work needed in the DOC project to prepare the release branch and the
	amount of change unrelated to the release in the master branch.
	For example contributing projects that create named release branches
	early to begin work on the next release and/or contributing projects
	to the master that are not yet part of the named release would result
	in an earlier named release branch to cleanly separate work to stabilize
	a release from other changes in the master branch.

	A named release branch is integrated and deployed at Read The Docs
	as the 'named release' by aggregating content from contributing
	project repositories. A contributing project repository can
	choose one of the following for the 'named release' branch:

	* Remove the contributing project repository submodule and RST
	references when not part of the named release.

	* Provide a commit hash or tag for the contributing project master
	branch to be used for the life of the release branch or until a
	request is submitted to change the commit hash or tag.

	* Provide the commit hash for the head of a named release branch
	created in the contributing project repository. This option
	may be appropriate if frequent changes are expected over the
	life of the named release and work the same way as the continuous
	integration and deployment described for the master branch.

	The decision on option for each contributing project repository
	can be made or changed before the final release is approved. The
	amount of change and expected differences between master and a
	named release branch for each repository should drive the choice of
	option and timing.

	About GIT branches
	------------------

	GIT is a powerful tool allowing many actions, but without respecting some rules
	the GIT structure can be quickly hard to maintain.

	Here are some conventions about GIT branches:

	- ALWAYS create a local branch to edit or create any file. This local branch
	will be considered as a topic in Gerrit and allow contributors to
	work at the same time on the same project.

	- 1 feature = 1 branch. In the case of documentation, a new chapter
	or page about a new code feature can be considered as a 'doc feature'

	- 1 bug = 1 branch. In the case of documentation, a correction on an
	existing sentence can be considered as a 'doc bug'

	- the master branch is considered as "unstable", containing new features that
	will converge to a stable situation for the release date.

	The day of the release, the repository owner will create a new branch to
	fix the code and documentation. This will represent the 'stable' code of the
	release. In this context:

	- NEVER push a new feature on a stable branch

	- Only bug correction are authorized on a stable branch using
	cherry pick method

	.. image:: git_branches.png

	Creating Restructured Text
	==========================

	Templates and Examples
	----------------------
	Templates are available that capture the kinds of information
	useful for different types of projects and provide some examples of
	restructured text. We organize templates in the following way to:

	- help authors understand relationships between documents

	- keep the user audience context in mind when writing and

	- tailor sections for different kinds of projects.


	Sections Represent a certain type of content. A section
	is provided in an project repository, to describe something about
	the characteristics, use, capability, etc. of things in that repository.
	A section may also be referenced from other sections and in
	other repositories. For example, an API specification provided in a project
	repository might be referenced to in a Platform API Reference Guide.
	The notes in the beginning of each section template provide
	additional detail about what is typically covered and where
	there may be references to the section.

	Collections Are a set of sections that are typically provided
	for a particular type of project, repository, guide, reference manual, etc.
	For example, a collection for a platform component, an SDK, etc.

	You can: browse the template collections and sections below;
	show source to look at the Restructured Text and Sphinx directives used;
	copy the source either from a browser window or by downloading the
	file in raw form from
	the `gerrit doc repository <https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree;f=docs/templates;/>`_ and
	then add them to your repository docs folder and index.rst.


	Sections
	++++++++

	.. toctree::
	:maxdepth: 1
	:glob:

	../../../templates/sections/*


	Collections
	+++++++++++

	.. toctree::
	:maxdepth: 1
	:glob:

	../../../templates/collections/*



	In addition to these simple templates and examples
	there are many open source projects (e.g. Open Daylight, Open Stack)
	that are using Sphinx and Readthedocs where you may find examples
	to start with. Working with project teams we will continue to enhance
	templates here and capture frequently asked questions on the developer
	wiki question topic `documentation <https://wiki.onap.org/questions/topics/16384055/documentation>`_.

	Each project should:

	- decide what is relevant content

	- determine the best way to create/maintain it in the CI/CD process and

	- work with the documentation team to reference content from the
	master index and guides.

	Consider options including filling in a template, identifying existing
	content that can be used as is or easily converted, and use of Sphinx
	directives/extensions to automatically generate restructured text
	from other source you already have.

	Links and References
	--------------------
	It's pretty common to want to reference another location in the
	ONAP documentation and it's pretty easy to do with
	reStructuredText. This is a quick primer, more information is in the
	`Sphinx section on Cross-referencing arbitrary locations
	<http://www.sphinx-doc.org/en/stable/markup/inline.html#ref-role>`_.

	Within a single document, you can reference another section simply by::

	This is a reference to `The title of a section`_

	Assuming that somewhere else in the same file there a is a section
	title something like::

	The title of a section
	^^^^^^^^^^^^^^^^^^^^^^

	It's typically better to use ``:ref:`` syntax and labels to provide
	links as they work across files and are resilient to sections being
	renamed. First, you need to create a label something like::

	.. _a-label:

	The title of a section
	^^^^^^^^^^^^^^^^^^^^^^

	.. note:: The underscore (_) before the label is required.

	Then you can reference the section anywhere by simply doing::

	This is a reference to :ref:`a-label`

	or::

	This is a reference to :ref:`a section I really liked <a-label>`

	.. note:: When using ``:ref:``-style links, you don't need a trailing
	underscore (_).

	Because the labels have to be unique, it usually makes sense to prefix
	the labels with the project name to help share the label space, e.g.,
	``sfc-user-guide`` instead of just ``user-guide``.

	Testing
	=======

	One RST File
	------------
	It is recommended that all rst content is validated by `doc8 <https://pypi.python.org/pypi/doc8>`_ standards.
	To validate your rst files using doc8, install doc8.

	.. code-block:: bash

	sudo pip install doc8

	doc8 can now be used to check the rst files. Execute as,

	.. code-block:: bash

	doc8 --ignore D000,D001 <file>



	One Project
	-----------
	To test how the documentation renders in HTML, follow these steps:

	Install virtual environment.

	.. code-block:: bash

	sudo pip install virtualenv
	cd /local/repo/path/to/project

	Download the doc repository.

	.. code-block:: bash

	git clone http://gerrit.onap.org/r/doc

	Change directory to doc & install requirements.

	.. code-block:: bash

	cd doc
	sudo pip install -r etc/requirements.txt

	Move the conf.py file to your project folder where RST files have been kept:

	.. code-block:: bash

	mv doc/docs/conf.py <path-to-your-folder>/

	Move the static files to your project folder:

	.. code-block:: bash

	mv docs/_static/ <path-to-your-folder>/

	Build the documentation from within your project folder:

	.. code-block:: bash

	sphinx-build -b html <path-to-your-folder> <path-to-output-folder>

	Your documentation shall be built as HTML inside the
	specified output folder directory.

	.. note:: Be sure to remove the `conf.py`, the static/ files and the output folder from the `<project>/docs/`. This is for testing only. Only commit the rst files and related content.

	.. _building-all-documentation:

	All Documentation
	-----------------
	To build the all documentation under doc/, follow these steps:

	Install virtual environment.

	.. code-block:: bash

	sudo pip install virtualenv
	cd /local/repo/path/to/project

	Download the DOC repository.

	.. code-block:: bash

	git clone http://gerrit.onap.org/r/doc

	Build documentation using tox local environment & then open using any browser.

	.. code-block:: bash

	cd doc
	tox -elocal
	firefox docs/_build/html/index.html

	.. note:: Make sure to run `tox -elocal` and not just `tox`.
	This updates all submodule repositories that are integrated
	by the doc project.

	There are additional tox environment options for checking External
	URLs and Spelling. Use the tox environment options below and then
	look at the output with the Linux `more` or similar command
	scan for output that applies to the files you are validating.

	.. code-block:: bash

	tox -elinkcheck
	more < docs/_build/linkcheck/output.txt

	tox -espellcheck
	more < docs/_build/spellcheck/output.txt