docs/guides/onap-developer/settingup/onap_heat.rst - onap/doc - Gitiles

 .. This work is licensed undera Creative Commons Attribution 4.0
 .. International License.
 .. http://creativecommons.org/licenses/by/4.0
 .. Copyright 2017-2018 ONAP


 .. contents::
    :depth: 2
 ..

 .. index:: Setting Up Full ONAP using Virtual Machines

 ==============================
 **Setting Up ONAP using Heat**
 ==============================

 .. _installing-onap-heat:

 **Context**
 ===========
 ONAP may be deployed in different contexts depending on your requirements.
 The recommended installation for Beijng Release over virtual machines is based
 on OpenStack Heat Template.

 The VNFs managed by ONAP may be deployed in different OpenStack tenants or
 based on top of VMware based infrastructure. For details, refer
 :ref:`to MultiCloud project<index-multicloud>`.

 The current installation is based on the single tenant deployment (all the ONAP
 components will be hosted in a unique tenant).

 .. note::
    Prior to deployment of ONAP, there is no need to download manually any
    Docker Container.
    The Heat deployment takes care to automatically download the Docker
    Containers.


 .. _demo-installing-running-onap-requirements:

 **Requirements**
 ================

 OpenStack
 ---------
 ONAP installation is validated on
 `OpenStack Ocata <https://releases.openstack.org/ocata/>`_ or latter release.

 You can use various Cloud providers offering OpenStack based solutions.
 A list of available Cloud providers on the
 `OpenStack marketplace <https://www.openstack.org/marketplace/public-clouds/>`_.

 You can use your private Cloud infrastructure.

 The following OpenStack components must be deployed in the infrastructure:
  - *Cinder*
  - *Glance*
  - *Heat*
  - *Horizon*
  - *Keystone*
  - *Neutron*
  - *Nova*

 To deploy OpenStack, you can use various solutions:
  - `OpenStack installation guide <https://docs.openstack.org/install-guide/>`_
  - `OPNFV Cross Community Continuous Integration - XCI installer <http://docs.opnfv.org/en/latest/infrastructure/xci.html>`_
  - `OpenStack Ocata installation guide <https://docs.openstack.org/ocata/install/>`_

 .. tip::
  - Notice the documentation version mentioned in the URL, e.g. ocata/, pike/,
    latest/ ...
  - The installation is pretty huge, some automated scripts have been created by
    the community:

   - `OpenStack installation with Ansible (All openstack services) <https://docs.openstack.org/openstack-ansible/latest/>`_
   - `OpenStack Ocata installation scripts for testing environment(DO NOT install Heat, Designate and Cinder Volume services) <https://github.com/reachsrirams/openstack-scripts>`_

 The OpenStack infrastructure must enable internet access and you need to have
 an "External network" already configured properly.
 The External network ID will have to be provided in the Heat environment file.

 ONAP components
 ---------------
 The following table presents the mapping between the created VM and the ONAP
 components, and provides VM information (flavor and image):

     ===================  =================   =======  ============
     VM name              ONAP project(s)     Flavor   Image
     ===================  =================   =======  ============
     onap-aai-inst1       AAI                 xlarge   Ubuntu 16.04
     onap-aai-inst2       AAI/UI              xlarge   Ubuntu 16.04
     onap-appc            APPC, CCSDK         large    Ubuntu 16.04
     onap-clamp           CLAMP               medium   Ubuntu 16.04
     onap-dns-server      *Internal DNS*      small    Ubuntu 16.04
     onap-message-router  DMAAP               large    Ubuntu 16.04
     onap-multi-service   MSB, VF-C, VNFSDK   xlarge   Ubuntu 16.04
     onap-policy          Policy              xlarge   Ubuntu 16.04
     onap-portal          Portal, CLI         large    Ubuntu 16.04
     onap-robot           Integration         medium   Ubuntu 16.04
     onap-sdc             SDC                 xlarge   Ubuntu 16.04
     onap-sdnc            SDNC, CCSDK         large    Ubuntu 16.04
     onap-so              SO                  large    Ubuntu 16.04
     onap-vid             VID                 medium   Ubuntu 16.04
     onap-dcae            DCAE, Holmes        xlarge   Ubuntu 16.04
     onap-music           Music               large    Ubuntu 16.04
     onap-oof             OOF                 large    Ubuntu 16.04
     onap-aaf             AAF                 medium   Ubuntu 16.04
     onap-sms             AAF                 medium   Ubuntu 16.04
     onap-nbi             External API        small    Ubuntu 16.04
     ===================  =================   =======  ============

 Footprint
 ---------
 The ONAP installation requires the following footprint:
  - 20 VM
  - 88 vCPU
  - 176 GB RAM
  - 1.76 TB Storage
  - 20 floating IP addresses

 .. Note: You should also reserve some resources for the VNFs to be deployed.

 Artifacts
 ---------
 The following artifacts must be deployed on the OpenStack infrastructure:
  - a public SSH key to access the various VM
  - Ubuntu 16.04 image (https://cloud-images.ubuntu.com/releases/16.04/release/)
  - Set of flavors: small, medium, large, xlarge

 .. Note: The floating IP may be private IP.

 .. Note: Basic flavors can reuse the default flavors as defined by
    OpenStack
    <https://docs.openstack.org/horizon/latest/admin/manage-flavors.html>`_

 Security
 --------
 The default installation assumes that the Default security group is configured
 to enable full access between the ONAP components.
 Depending on your environment, we may need to open some security groups
 (eg when using the portal from your desktop).

 The list of various services and ports used can be found on the
 `ONAP wiki - ports <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_.

 **Deployment**
 ==============

 Source files
 ------------

 Both following files must be downloaded and configured to match your
 configuration:

 - Template file:
   https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.yaml?h=casablanca
 - Environment file:
   https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.env?h=casablanca

 The environment file must be customized as described in the following sections.

 .. Note Beijing release files

 Description
 -----------

 The ONAP Heat template spins up all the components including the DCAE.
 The template, onap_openstack.yaml, comes with an environment file,
 onap_openstack.env, in which all the default values are defined.

 The Heat template is composed of two sections: (i) parameters, and (ii)
 resources.
 The parameter section contains the declaration and
 description of the parameters that will be used to spin up ONAP, such as
 public network identifier, URLs of code and artifacts repositories, etc.
 The default values of these parameters can be found in the environment
 file.

 The resource section contains the definition of:

 - ONAP Private Management Network, which ONAP components use to communicate
   with each other and with VNFs
 - ONAP Virtual Machines (VMs)
 - Public key pair used to access ONAP VMs
 - Virtual interfaces towards the ONAP Private Management Network
 - Disk volumes

 Each VM specification includes Operating System image name, VM size
 (i.e. flavor), VM name, etc. Each VM has two virtual network interfaces:
 one towards the public network and one towards the ONAP Private
 Management network, as described above. Furthermore, each VM runs a
 post-instantiation script that downloads and installs software
 dependencies (e.g. Java JDK, gcc, make, Python, ...) and ONAP software
 packages and Docker containers from remote repositories.

 When the Heat template is executed, the OpenStack Heat engine creates
 the resources defined in the Heat template, based on the parameters
 values defined in the environment file.

 Environment file
 ----------------

 Before running Heat, it is necessary to customize the environment file.
 Indeed, some parameters, namely public_net_id, pub_key,
 openstack_tenant_id, openstack_username, and openstack_api_key,
 need to be set depending on the user's environment:

 **Global parameters**

 ::

  public_net_id:       PUT YOUR NETWORK ID/NAME HERE
  pub_key:             PUT YOUR PUBLIC KEY HERE
  openstack_tenant_id: PUT YOUR OPENSTACK PROJECT ID HERE
  openstack_username:  PUT YOUR OPENSTACK USERNAME HERE
  openstack_api_key:   PUT YOUR OPENSTACK PASSWORD HERE
  keystone_url:        PUT THE KEYSTONE URL HERE (do not include version number)

 openstack_region parameter is set to RegionOne (OpenStack default). If
 your OpenStack is using another Region, please modify this parameter.

 public_net_id is the unique identifier (UUID) or name of the public
 network of the cloud provider. To get the public_net_id, use the
 following OpenStack CLI command (ext is the name of the external
 network, change it with the name of the external network of your
 installation)

 ::

  openstack network list  | grep ext |  awk '{print $2}'

 pub_key is string value of the public key that will be installed in
 each ONAP VM. To create a public/private key pair in Linux, please
 execute the following instruction:

 ::

  user@ubuntu:~$ ssh-keygen -t rsa

 The following operations create the public/private key pair:

 ::

  Generating public/private rsa key pair.
  Enter file in which to save the key (/home/user/.ssh/id_rsa):
  Created directory '/home/user/.ssh'.
  Enter passphrase (empty for no passphrase):
  Enter same passphrase again:
  Your identification has been saved in /home/user/.ssh/id_rsa.
  Your public key has been saved in /home/user/.ssh/id_rsa.pub.

 openstack_username, openstack_tenant_id (password), and
 openstack_api_key are user's credentials to access the
 OpenStack-based cloud.

 **Images and flavors parameters**

 ::

  ubuntu_1604_image:  PUT THE UBUNTU 16.04 IMAGE NAME HERE
  flavor_small:       PUT THE SMALL FLAVOR NAME HERE
  flavor_medium:      PUT THE MEDIUM FLAVOR NAME HERE
  flavor_large:       PUT THE LARGE FLAVOR NAME HERE
  flavor_xlarge:      PUT THE XLARGE FLAVOR NAME HERE

 To get the images in your OpenStack environment, use the following
 OpenStack CLI command:

 ::

         openstack image list | grep 'ubuntu'

 To get the flavor names used in your OpenStack environment, use the
 following OpenStack CLI command:

 ::

         openstack flavor list

 **Proxy parameters**

 ::
   http_proxy: PUT YOUR HTTP PROXY ADDRESS (if you don't work behind a proxy put no_proxy)
   https_proxy: PUT YOUR HTTPS PROXY ADDRESS (if you don't work behind a proxy put no_proxy)

 **Network parameters**

 ::

  dns_list: PUT THE ADDRESS OF THE EXTERNAL DNS HERE (e.g. a comma-separated list
  of IP addresses in your /etc/resolv.conf in UNIX-based Operating Systems)
  external_dns: PUT THE FIRST ADDRESS OF THE EXTERNAL DNS LIST HERE
  dns_forwarder: PUT THE IP OF DNS FORWARDER FOR ONAP DEPLOYMENT'S OWN DNS SERVER
  oam_network_cidr: 10.0.0.0/16

 You can use the Google Public DNS 8.8.8.8 and 4.4.4.4 address or your internal
 DNS servers.

 ONAP installs a DNS server used to resolve IP addresses in the ONAP OAM private
 network.

 **DCAE Parameters**

 Depending on the set of DCAE compoennts to be deployed, you can select

 - R3 MVP - This profile includes a minimum set of DCAE components that will
   support the vFW/vDNS, vCPE. and vVoLTE use cases. It will deploy the
   following components: Consul server, Config Binding Service, Postgres
   database, VES collector, TCA analytics, Holmes rule management, Holmes
   engine management
 - R3 - This profile also deploys the rest of the DCAE platform. With R3
   deployment profile, DCAE supports CLAMP and full control loop
   functionalities. These additional components are: Cloudify Manager,
   Deployment Handler, Policy Handler, Service Change Handler, Inventory API.
 - R3PLUS - This profile deploys the DCAE R2 stretch goal service components,
   namely: PNF Registration Handler, SNMP Trap collector, HV-VES Collector,
   Missing Heartbeat Detection analytics, Universal Mapper

 ::

   dcae_deployment_profile: PUT DCAE DEPLOYMENT PROFILE (R3MVP, R3, or R3PLUS)

 Instantiation
 -------------

 The ONAP platform can be instantiated via Horizon (OpenStack dashboard)
 or Command Line.

 **Instantiation via Horizon:**

 - Login to Horizon URL with your personal credentials
 - Click "Stacks" from the "Orchestration" menu
 - Click "Launch Stack"
 - Paste or manually upload the Heat template file (onap_openstack.yaml) in the
   "Template Source" form
 - Paste or manually upload the Heat environment file (onap_openstack.env) in
   the "Environment Source" form
 - Click "Next" - Specify a name in the "Stack Name" form
 - Provide the password in the "Password" form
 - Click "Launch"

 **Instantiation via Command Line:**

 - You need to have the OpenStack Heat service installed:

 - Create a file (named i.e. ~/openstack/openrc) that sets all the
   environmental variables required to access your OpenStack tenant:

 ::

  export OS_AUTH_URL=INSERT THE AUTH URL HERE
  export OS_USERNAME=INSERT YOUR USERNAME HERE
  export OS_TENANT_ID=INSERT YOUR TENANT ID HERE
  export OS_REGION_NAME=INSERT THE REGION HERE
  export OS_PASSWORD=INSERT YOUR PASSWORD HERE
  export OS_USER_DOMAIN_NAME=INSERT YOUR DOMAIN HERE
  export OS_PROJECT_NAME=INSERT YOUR PROJECT NAME HERE

 -  Run the script from command line:

 ::

  source ~/openstack/openrc

 -  In order to install the ONAP platform, type:

 ::

  # Old Heat client

 ::

  heat stack-create STACK_NAME -f PATH_TO_HEAT_TEMPLATE(YAML FILE)
  -e PATH_TO_ENV_FILE

  OR

 ::

  # New OpenStack client
  openstack stack create -t PATH_TO_HEAT_TEMPLATE(YAML FILE)
  -e PATH_TO_ENV_FILE STACK_NAME


 .. Note The Heat template deployment may take time (up to one hour)
    depending on your hardware environment.

 Test the installation
 ---------------------
 Every ONAP component offers a HealthCheck REST API. The Robot Virtual Machine
 (*onap-robot*) can be used to test that every components run smoothly.
 Run the following command to perform the HealthCheck:

 .. code-block:: bash

   docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh \
   -i health \
   -d ./html \
   -V /share/config/integration_robot_properties.py \
   -V /share/config/integration_preload_parameters.py \
   -V /share/config/vm_properties.py

 This test suite will execute 40 tests towards the various ONAP components.

 After the installation, it is possible to deploy the various use-cases
 described in `ONAP wiki - demos <https://wiki.onap.org/display/DW/Running+the+ONAP+Demos>`_.

 Detect problems
 ---------------
 If all the tests are not OK, many causes are possible.
 Here is a simple procedure to detect where the problem occurs:

 * Check the OpenStack Virtual Machine logs
 * Connect to the Virtual Machine and check that the various containers are
   running.

 The list of containers are described on the `ONAP wiki - containers <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_.
 In case some containers are missing, check the Docker logs using the following
 command:

 .. code-block:: bash

  sudo docker ps -a
  sudo docker logs <containerid>

 **Portal configuration**
 ========================
 The current ONAP installation is using the *onap.org* domain.
 To use the portal on your desktop, you must configure the following information
 in your *hosts* file (located in /etc/hosts for Linux or
 /windows/system32/drivers/etc/hosts for Windows):

 .. code-block:: bash

  <onap-policy_ip>      policy.api.simpledemo.onap.org
  <onap-portal_ip>      portal.api.simpledemo.onap.org
  <onap-sdc_ip>         sdc.api.simpledemo.onap.org
  <onap-vid_ip>         vid.api.simpledemo.onap.org
  <onap-aai-inst1_ip>   aai.api.simpledemo.onap.org
  <onap-aai-inst2_ip>   aai.ui.simpledemo.onap.org


 You can use the Horizon dashboard to get the IP addresses associated with the
 Virtual Machines or use the following command line:

 .. code-block:: bash

  openstack server list

 Launch the portal on the
 http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm

 Various users are predefined as presented in the following table:

   .. csv-table::
    :header: Role, Login
    :widths: 20, 20

     Superuser,demo
     Designer,cs0008
     Tester,jm0007
     Governor,gv0001
     Ops,op0001

 The password is *demo123456!*

 Go to the `Portal component user guide
 <http://onap.readthedocs.io/en/latest/submodules/portal.git/docs/index.html>`_

 Other UI documentation:
  - `CLAMP  <http://onap.readthedocs.io/en/latest/submodules/clamp.git/docs/index.html>`_
  - `SDC <http://onap.readthedocs.io/en/latest/submodules/sdc.git/docs/index.html>`_
  - `UI Use-Case <http://onap.readthedocs.io/en/latest/submodules/usecase-ui.git/docs/index.html>`_


 **Components**
 ==============

 The list of various services and ports used can be found on the
 `ONAP wiki - services <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_

 .. This work is licensed under a Creative Commons Attribution 4.0
 .. International License.
 ..  http://creativecommons.org/licenses/by/4.0
 .. Copyright 2017-2018 ONAP


 .. contents::
	.. This work is licensed undera Creative Commons Attribution 4.0
	.. International License.
	.. http://creativecommons.org/licenses/by/4.0
	.. Copyright 2017-2018 ONAP


	.. contents::
	:depth: 2
	..

	.. index:: Setting Up Full ONAP using Virtual Machines

	==============================
	Setting Up ONAP using Heat
	==============================

	.. _installing-onap-heat:

	Context
	===========
	ONAP may be deployed in different contexts depending on your requirements.
	The recommended installation for Beijng Release over virtual machines is based
	on OpenStack Heat Template.

	The VNFs managed by ONAP may be deployed in different OpenStack tenants or
	based on top of VMware based infrastructure. For details, refer
	:ref:`to MultiCloud project<index-multicloud>`.

	The current installation is based on the single tenant deployment (all the ONAP
	components will be hosted in a unique tenant).

	.. note::
	Prior to deployment of ONAP, there is no need to download manually any
	Docker Container.
	The Heat deployment takes care to automatically download the Docker
	Containers.


	.. _demo-installing-running-onap-requirements:

	Requirements
	================

	OpenStack
	---------
	ONAP installation is validated on
	`OpenStack Ocata <https://releases.openstack.org/ocata/>`_ or latter release.

	You can use various Cloud providers offering OpenStack based solutions.
	A list of available Cloud providers on the
	`OpenStack marketplace <https://www.openstack.org/marketplace/public-clouds/>`_.

	You can use your private Cloud infrastructure.

	The following OpenStack components must be deployed in the infrastructure:
	- Cinder
	- Glance
	- Heat
	- Horizon
	- Keystone
	- Neutron
	- Nova

	To deploy OpenStack, you can use various solutions:
	- `OpenStack installation guide <https://docs.openstack.org/install-guide/>`_
	- `OPNFV Cross Community Continuous Integration - XCI installer <http://docs.opnfv.org/en/latest/infrastructure/xci.html>`_
	- `OpenStack Ocata installation guide <https://docs.openstack.org/ocata/install/>`_

	.. tip::
	- Notice the documentation version mentioned in the URL, e.g. ocata/, pike/,
	latest/ ...
	- The installation is pretty huge, some automated scripts have been created by
	the community:

	- `OpenStack installation with Ansible (All openstack services) <https://docs.openstack.org/openstack-ansible/latest/>`_
	- `OpenStack Ocata installation scripts for testing environment(DO NOT install Heat, Designate and Cinder Volume services) <https://github.com/reachsrirams/openstack-scripts>`_

	The OpenStack infrastructure must enable internet access and you need to have
	an "External network" already configured properly.
	The External network ID will have to be provided in the Heat environment file.

	ONAP components
	---------------
	The following table presents the mapping between the created VM and the ONAP
	components, and provides VM information (flavor and image):

	=================== ================= ======= ============
	VM name ONAP project(s) Flavor Image
	=================== ================= ======= ============
	onap-aai-inst1 AAI xlarge Ubuntu 16.04
	onap-aai-inst2 AAI/UI xlarge Ubuntu 16.04
	onap-appc APPC, CCSDK large Ubuntu 16.04
	onap-clamp CLAMP medium Ubuntu 16.04
	onap-dns-server Internal DNS small Ubuntu 16.04
	onap-message-router DMAAP large Ubuntu 16.04
	onap-multi-service MSB, VF-C, VNFSDK xlarge Ubuntu 16.04
	onap-policy Policy xlarge Ubuntu 16.04
	onap-portal Portal, CLI large Ubuntu 16.04
	onap-robot Integration medium Ubuntu 16.04
	onap-sdc SDC xlarge Ubuntu 16.04
	onap-sdnc SDNC, CCSDK large Ubuntu 16.04
	onap-so SO large Ubuntu 16.04
	onap-vid VID medium Ubuntu 16.04
	onap-dcae DCAE, Holmes xlarge Ubuntu 16.04
	onap-music Music large Ubuntu 16.04
	onap-oof OOF large Ubuntu 16.04
	onap-aaf AAF medium Ubuntu 16.04
	onap-sms AAF medium Ubuntu 16.04
	onap-nbi External API small Ubuntu 16.04
	=================== ================= ======= ============

	Footprint
	---------
	The ONAP installation requires the following footprint:
	- 20 VM
	- 88 vCPU
	- 176 GB RAM
	- 1.76 TB Storage
	- 20 floating IP addresses

	.. Note: You should also reserve some resources for the VNFs to be deployed.

	Artifacts
	---------
	The following artifacts must be deployed on the OpenStack infrastructure:
	- a public SSH key to access the various VM
	- Ubuntu 16.04 image (https://cloud-images.ubuntu.com/releases/16.04/release/)
	- Set of flavors: small, medium, large, xlarge

	.. Note: The floating IP may be private IP.

	.. Note: Basic flavors can reuse the default flavors as defined by
	OpenStack
	<https://docs.openstack.org/horizon/latest/admin/manage-flavors.html>`_

	Security
	--------
	The default installation assumes that the Default security group is configured
	to enable full access between the ONAP components.
	Depending on your environment, we may need to open some security groups
	(eg when using the portal from your desktop).

	The list of various services and ports used can be found on the
	`ONAP wiki - ports <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_.

	Deployment
	==============

	Source files
	------------

	Both following files must be downloaded and configured to match your
	configuration:

	- Template file:
	https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.yaml?h=casablanca
	- Environment file:
	https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.env?h=casablanca

	The environment file must be customized as described in the following sections.

	.. Note Beijing release files

	Description
	-----------

	The ONAP Heat template spins up all the components including the DCAE.
	The template, onap_openstack.yaml, comes with an environment file,
	onap_openstack.env, in which all the default values are defined.

	The Heat template is composed of two sections: (i) parameters, and (ii)
	resources.
	The parameter section contains the declaration and
	description of the parameters that will be used to spin up ONAP, such as
	public network identifier, URLs of code and artifacts repositories, etc.
	The default values of these parameters can be found in the environment
	file.

	The resource section contains the definition of:

	- ONAP Private Management Network, which ONAP components use to communicate
	with each other and with VNFs
	- ONAP Virtual Machines (VMs)
	- Public key pair used to access ONAP VMs
	- Virtual interfaces towards the ONAP Private Management Network
	- Disk volumes

	Each VM specification includes Operating System image name, VM size
	(i.e. flavor), VM name, etc. Each VM has two virtual network interfaces:
	one towards the public network and one towards the ONAP Private
	Management network, as described above. Furthermore, each VM runs a
	post-instantiation script that downloads and installs software
	dependencies (e.g. Java JDK, gcc, make, Python, ...) and ONAP software
	packages and Docker containers from remote repositories.

	When the Heat template is executed, the OpenStack Heat engine creates
	the resources defined in the Heat template, based on the parameters
	values defined in the environment file.

	Environment file
	----------------

	Before running Heat, it is necessary to customize the environment file.
	Indeed, some parameters, namely public_net_id, pub_key,
	openstack_tenant_id, openstack_username, and openstack_api_key,
	need to be set depending on the user's environment:

	Global parameters

	::

	public_net_id: PUT YOUR NETWORK ID/NAME HERE
	pub_key: PUT YOUR PUBLIC KEY HERE
	openstack_tenant_id: PUT YOUR OPENSTACK PROJECT ID HERE
	openstack_username: PUT YOUR OPENSTACK USERNAME HERE
	openstack_api_key: PUT YOUR OPENSTACK PASSWORD HERE
	keystone_url: PUT THE KEYSTONE URL HERE (do not include version number)

	openstack_region parameter is set to RegionOne (OpenStack default). If
	your OpenStack is using another Region, please modify this parameter.

	public_net_id is the unique identifier (UUID) or name of the public
	network of the cloud provider. To get the public_net_id, use the
	following OpenStack CLI command (ext is the name of the external
	network, change it with the name of the external network of your
	installation)

	::

	openstack network list \| grep ext \| awk '{print $2}'

	pub_key is string value of the public key that will be installed in
	each ONAP VM. To create a public/private key pair in Linux, please
	execute the following instruction:

	::

	user@ubuntu:~$ ssh-keygen -t rsa

	The following operations create the public/private key pair:

	::

	Generating public/private rsa key pair.
	Enter file in which to save the key (/home/user/.ssh/id_rsa):
	Created directory '/home/user/.ssh'.
	Enter passphrase (empty for no passphrase):
	Enter same passphrase again:
	Your identification has been saved in /home/user/.ssh/id_rsa.
	Your public key has been saved in /home/user/.ssh/id_rsa.pub.

	openstack_username, openstack_tenant_id (password), and
	openstack_api_key are user's credentials to access the
	OpenStack-based cloud.

	Images and flavors parameters

	::

	ubuntu_1604_image: PUT THE UBUNTU 16.04 IMAGE NAME HERE
	flavor_small: PUT THE SMALL FLAVOR NAME HERE
	flavor_medium: PUT THE MEDIUM FLAVOR NAME HERE
	flavor_large: PUT THE LARGE FLAVOR NAME HERE
	flavor_xlarge: PUT THE XLARGE FLAVOR NAME HERE

	To get the images in your OpenStack environment, use the following
	OpenStack CLI command:

	::

	openstack image list \| grep 'ubuntu'

	To get the flavor names used in your OpenStack environment, use the
	following OpenStack CLI command:

	::

	openstack flavor list

	Proxy parameters

	::
	http_proxy: PUT YOUR HTTP PROXY ADDRESS (if you don't work behind a proxy put no_proxy)
	https_proxy: PUT YOUR HTTPS PROXY ADDRESS (if you don't work behind a proxy put no_proxy)

	Network parameters

	::

	dns_list: PUT THE ADDRESS OF THE EXTERNAL DNS HERE (e.g. a comma-separated list
	of IP addresses in your /etc/resolv.conf in UNIX-based Operating Systems)
	external_dns: PUT THE FIRST ADDRESS OF THE EXTERNAL DNS LIST HERE
	dns_forwarder: PUT THE IP OF DNS FORWARDER FOR ONAP DEPLOYMENT'S OWN DNS SERVER
	oam_network_cidr: 10.0.0.0/16

	You can use the Google Public DNS 8.8.8.8 and 4.4.4.4 address or your internal
	DNS servers.

	ONAP installs a DNS server used to resolve IP addresses in the ONAP OAM private
	network.

	DCAE Parameters

	Depending on the set of DCAE compoennts to be deployed, you can select

	- R3 MVP - This profile includes a minimum set of DCAE components that will
	support the vFW/vDNS, vCPE. and vVoLTE use cases. It will deploy the
	following components: Consul server, Config Binding Service, Postgres
	database, VES collector, TCA analytics, Holmes rule management, Holmes
	engine management
	- R3 - This profile also deploys the rest of the DCAE platform. With R3
	deployment profile, DCAE supports CLAMP and full control loop
	functionalities. These additional components are: Cloudify Manager,
	Deployment Handler, Policy Handler, Service Change Handler, Inventory API.
	- R3PLUS - This profile deploys the DCAE R2 stretch goal service components,
	namely: PNF Registration Handler, SNMP Trap collector, HV-VES Collector,
	Missing Heartbeat Detection analytics, Universal Mapper

	::

	dcae_deployment_profile: PUT DCAE DEPLOYMENT PROFILE (R3MVP, R3, or R3PLUS)

	Instantiation
	-------------

	The ONAP platform can be instantiated via Horizon (OpenStack dashboard)
	or Command Line.

	Instantiation via Horizon:

	- Login to Horizon URL with your personal credentials
	- Click "Stacks" from the "Orchestration" menu
	- Click "Launch Stack"
	- Paste or manually upload the Heat template file (onap_openstack.yaml) in the
	"Template Source" form
	- Paste or manually upload the Heat environment file (onap_openstack.env) in
	the "Environment Source" form
	- Click "Next" - Specify a name in the "Stack Name" form
	- Provide the password in the "Password" form
	- Click "Launch"

	Instantiation via Command Line:

	- You need to have the OpenStack Heat service installed:

	- Create a file (named i.e. ~/openstack/openrc) that sets all the
	environmental variables required to access your OpenStack tenant:

	::

	export OS_AUTH_URL=INSERT THE AUTH URL HERE
	export OS_USERNAME=INSERT YOUR USERNAME HERE
	export OS_TENANT_ID=INSERT YOUR TENANT ID HERE
	export OS_REGION_NAME=INSERT THE REGION HERE
	export OS_PASSWORD=INSERT YOUR PASSWORD HERE
	export OS_USER_DOMAIN_NAME=INSERT YOUR DOMAIN HERE
	export OS_PROJECT_NAME=INSERT YOUR PROJECT NAME HERE

	- Run the script from command line:

	::

	source ~/openstack/openrc

	- In order to install the ONAP platform, type:

	::

	# Old Heat client

	::

	heat stack-create STACK_NAME -f PATH_TO_HEAT_TEMPLATE(YAML FILE)
	-e PATH_TO_ENV_FILE

	OR

	::

	# New OpenStack client
	openstack stack create -t PATH_TO_HEAT_TEMPLATE(YAML FILE)
	-e PATH_TO_ENV_FILE STACK_NAME


	.. Note The Heat template deployment may take time (up to one hour)
	depending on your hardware environment.

	Test the installation
	---------------------
	Every ONAP component offers a HealthCheck REST API. The Robot Virtual Machine
	(onap-robot) can be used to test that every components run smoothly.
	Run the following command to perform the HealthCheck:

	.. code-block:: bash

	docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh \
	-i health \
	-d ./html \
	-V /share/config/integration_robot_properties.py \
	-V /share/config/integration_preload_parameters.py \
	-V /share/config/vm_properties.py

	This test suite will execute 40 tests towards the various ONAP components.

	After the installation, it is possible to deploy the various use-cases
	described in `ONAP wiki - demos <https://wiki.onap.org/display/DW/Running+the+ONAP+Demos>`_.

	Detect problems
	---------------
	If all the tests are not OK, many causes are possible.
	Here is a simple procedure to detect where the problem occurs:

	* Check the OpenStack Virtual Machine logs
	* Connect to the Virtual Machine and check that the various containers are
	running.

	The list of containers are described on the `ONAP wiki - containers <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_.
	In case some containers are missing, check the Docker logs using the following
	command:

	.. code-block:: bash

	sudo docker ps -a
	sudo docker logs <containerid>

	Portal configuration
	========================
	The current ONAP installation is using the onap.org domain.
	To use the portal on your desktop, you must configure the following information
	in your hosts file (located in /etc/hosts for Linux or
	/windows/system32/drivers/etc/hosts for Windows):

	.. code-block:: bash

	<onap-policy_ip> policy.api.simpledemo.onap.org
	<onap-portal_ip> portal.api.simpledemo.onap.org
	<onap-sdc_ip> sdc.api.simpledemo.onap.org
	<onap-vid_ip> vid.api.simpledemo.onap.org
	<onap-aai-inst1_ip> aai.api.simpledemo.onap.org
	<onap-aai-inst2_ip> aai.ui.simpledemo.onap.org


	You can use the Horizon dashboard to get the IP addresses associated with the
	Virtual Machines or use the following command line:

	.. code-block:: bash

	openstack server list

	Launch the portal on the
	http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm

	Various users are predefined as presented in the following table:

	.. csv-table::
	:header: Role, Login
	:widths: 20, 20

	Superuser,demo
	Designer,cs0008
	Tester,jm0007
	Governor,gv0001
	Ops,op0001

	The password is demo123456!

	Go to the `Portal component user guide
	<http://onap.readthedocs.io/en/latest/submodules/portal.git/docs/index.html>`_

	Other UI documentation:
	- `CLAMP <http://onap.readthedocs.io/en/latest/submodules/clamp.git/docs/index.html>`_
	- `SDC <http://onap.readthedocs.io/en/latest/submodules/sdc.git/docs/index.html>`_
	- `UI Use-Case <http://onap.readthedocs.io/en/latest/submodules/usecase-ui.git/docs/index.html>`_


	Components
	==============

	The list of various services and ports used can be found on the
	`ONAP wiki - services <https://wiki.onap.org/display/DW/ONAP+Services+List#ONAPServicesList-ONAPServices>`_

	.. This work is licensed under a Creative Commons Attribution 4.0
	.. International License.
	.. http://creativecommons.org/licenses/by/4.0
	.. Copyright 2017-2018 ONAP


	.. contents::