docs/guides/onap-user/cloud_site/openstack/index.rst - onap/doc - Gitiles

 .. This work is licensed under a Creative Commons Attribution 4.0
 .. International License.  http://creativecommons.org/licenses/by/4.0
 .. Copyright 2017 AT&T Intellectual Property.  All rights reserved.


 Adding a new Openstack Cloud Site to ONAP
 =========================================

 The following guide describe how to configure ONAP to be able to instantiate
 a service in a new cloud site based on Openstack.

 There are 2 methods for ONAP to communicate with Openstack in order
 to instantiate a service:

 method 1 : ONAP SO => Openstack
 method 2 : ONAP SO => ONAP MultiCloud => Openstack

 In this guideline the following parameter/value will be used

 * Complex Name: My_Complex
 * Region Name: INTEGRATION_CENTER
 * Cloud Owner: MyCompanyName


 Method 1 : without ONAP MultiCloud
 ----------------------------------

 TO BE DESCRIBED


 Method 2 : using ONAP MultiCloud
 --------------------------------


 STEP 1 : declare Cloud Site in ONAP SO to interact with ONAP multiCloud
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 The MariaDB database of ONAP SO needs to be modified.

 In the ONAP SO, the use of ONAP Multicloud for that Cloud Site need
 to be indicated.

 ONAP SO will communicate with ONAP MultiCloud like if MultiCloud would be
 an Openstack system.


 Connect to ONAP SO pod

 In a Unix Terminal, to get the SO pods id that is providing
 the MariaDB database:

 ::

   kubectl -n onap get pod | grep mariadb-galera

 To connect to that SO pod
 (in this example, the SO pod id is "onap-mariadb-galera-mariadb-galera-0"):

 ::

   kubectl -n onap exec -ti onap-mariadb-galera-mariadb-galera-0 sh

 Then modify the data in the MariaDB:


 A "mso_id" and "mso_pass" are required even if, with multicloud,
 only credentials managed by ESR will be used.

 Nevertheless, you need to provide a correct encrypted value for the pass value.

 "MyCompanyName" is a cloud owner value. WARNING : do not use underscore
 in the value.

 "INTEGRATION_CENTER" is the region name

 ::

   mysql --user=so_admin --password=so_Admin123
   USE catalogdb
   INSERT INTO identity_services VALUES('MC_KEYSTONE', 'http://msb-iag.onap:80/api/multicloud/v1/MyCompanyName_INTEGRATION_CENTER/identity/v2.0', 'admin', '5b6f369745f5f0e1c61da7f0656f3daf93c8030a2ea94b7964c67abdcfb49bdf2fa2266344b4caaca1eba8264d277831', 'service', 'admin', 1, 'KEYSTONE', 'USERNAME_PASSWORD', 'lastUser', '2019-07-05 10:32:00', '2019-07-05 10:32:00');
   INSERT INTO cloud_sites VALUES('INTEGRATION_CENTER', 'INTEGRATION_CENTER', 'MC_KEYSTONE', 2.5, 'INTEGRATION_CENTER', NULL, NULL, NULL, 'MySelf', '2019-07-05 10:32:00', '2019-07-05 10:32:00');


 You need then to change the ONAP SO VNF Adapter Rest API endpoint version:

 in a unix terminal:

 to find the right config map name:

 ::

   kubectl -n onap get configmap | grep so-so-bpmn-infra-app-configmap


 to edit and change the configmap:

 ::

   kubectl -n onap edit configmap onap-so-so-bpmn-infra-app-configmap

 in the section "vnf", modify the rest endpoint:

 ::

            vnf:
              endpoint: http://so-openstack-adapter.onap:8087/services/VnfAdapter
              rest:
   -            endpoint: http://so-openstack-adapter.onap:8087/services/rest/v1/vnfs
   +            endpoint: http://so-openstack-adapter.onap:8087/services/rest/v2/vnfs
            volume-groups:
              rest:
                endpoint: http://so-openstack-adapter.onapg:8087/services/rest/v1/volume-groups


 Having modified the configmap, it is necessary to delete the pod in order
 it takes the modification into account.

 to find the right pod name:

 ::

   kubectl -n onap get po | grep so-so


 You need to find the pod that is similar to the following pod id:

 "onap-so-so-6b9f64b887-jgrdp"


 to delete the pod:

 ::

   kubectl -n onap delete onap-so-so-6b9f64b887-jgrdp


 Then, wait for the pod to restart. To check:

 ::

   kubectl -n onap get po | grep so-so


 STEP 2 : declare the new cloud Site in ONAP AAI
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


 declare a Complex in ONAP AAI


 A Cloud Site is located in a Building called "Complex" object
 in ONAP AAI datamodel.

 AAI REST API is used to declare the complex object.

 Here is an example using "curl" tool to send the API request.

 The new Complex is named "My_Complex" in this example.


 ::

   curl -X PUT \
   https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/complexes/complex/My_Complex \
   -H 'Accept: application/json' \
   -H 'Authorization: Basic QUFJOkFBSQ==' \
   -H 'Cache-Control: no-cache' \
   -H 'Content-Type: application/json' \
   -H 'Real-Time: true' \
   -H 'X-FromAppId: jimmy-postman' \
   -H 'X-TransactionId: 9999' \
   -d '{
     "physical-location-id": "My_Complex",
     "data-center-code": "example-data-center-code-val-5556",
     "complex-name": "My_Complex",
     "identity-url": "example-identity-url-val-56898",
     "physical-location-type": "example-physical-location-type-val-7608",
     "street1": "example-street1-val-34205",
     "street2": "example-street2-val-99210",
     "city": "Beijing",
     "state": "example-state-val-59487",
     "postal-code": "100000",
     "country": "example-country-val-94173",
     "region": "example-region-val-13893",
     "latitude": "39.9042",
     "longitude": "106.4074",
     "elevation": "example-elevation-val-30253",
     "lata": "example-lata-val-46073"
     }' -k


 Check the Complexes in ONAP AAI:

 ::

   curl -X GET \
     https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/complexes \
     -H 'Accept: application/json' \
     -H 'Authorization: Basic QUFJOkFBSQ==' \
     -H 'X-FromAppId: AAI' \
     -H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
     -H 'cache-control: no-cache' -k


 declare a Cloud Site in ONAP AAI


 To declare a Cloud Site, you need to use the AAI REST API.

 The new Cloud site is named "INTEGRATION_CENTER" in this example.

 There is also a "Cloud Owner" notion in ONAP AAI datamodel.

 The new Cloud Owner is named "MyCompanyName" in this example.

 In Openstack, there is also a "region" notion. You need to get the value of
 the region that has been set when deploying your openstack platform

 In the following example the openstack region has the value "RegionOne"
 (in the parameter "cloud-extra-info")

 parameter "complex-name" relate to the Complex you previously declared.

 parameter "cloud-type" take the value "openstack"

 parameter "cloud-region-version" is refering to your openstack version

 parameter "cloud-extra-info" will contain the Openstack "region".
 Here, the region ID of the deployed openstack cloud site will be set.

 In the following example the openstack region has the value "RegionOne".

 parameter "esr-system-info-list" will contain the list of openstack platform
 credentials that will allow ONAP MultiCloud to communicate with the Cloud Site.


 ::

   curl -X PUT \
   https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER \
   -H 'Accept: application/json' \
   -H 'Authorization: Basic QUFJOkFBSQ==' \
   -H 'Cache-Control: no-cache' \
   -H 'Content-Type: application/json' \
   -H 'Postman-Token: 8b9b95ae-91d6-4436-90fa-69cb4d2db99c' \
   -H 'Real-Time: true' \
   -H 'X-FromAppId: jimmy-postman' \
   -H 'X-TransactionId: 9999' \
   -d '{
       "cloud-owner": "MyCompanyName",
       "cloud-region-id": "INTEGRATION_CENTER",
       "cloud-type": "openstack",
       "owner-defined-type": "N/A",
       "cloud-region-version": "pike",
       "complex-name": "My_Complex",
       "cloud-zone": "CloudZone",
       "sriov-automation": false,
       "identity-url": "WillBeUpdatedByMultiCloud",
       "cloud-extra-info":"{\"openstack-region-id\":\"RegionOne\"}"
       "esr-system-info-list": {
           "esr-system-info": [
               {
               "esr-system-info-id": "<random UUID, e.g. 5c85ce1f-aa78-4ebf-8d6f-4b62773e9bde>",
               "service-url": "http://<your openstack keystone endpoint, e.g. http://10.12.25.2:5000/v3>",
               "user-name": "<your openstack user>",
               "password": "<your openstack password>",
               "system-type": "VIM",
               "ssl-insecure": true,
               "cloud-domain": "Default",
               "default-tenant": "<your openstack project name>",
               "system-status": "active"
               }
           ]
         }
       }' -k


 Associate Cloud site to a Complex in ONAP AAI:


 ::

   curl -X PUT \
     https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/relationship-list/relationship \
     -H 'Accept: application/json' \
     -H 'Authorization: Basic QUFJOkFBSQ==' \
     -H 'Content-Type: application/json' \
     -H 'X-FromAppId: AAI' \
     -H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
     -H 'cache-control: no-cache' \
     -d '{
       "related-to": "complex",
       "related-link": "/aai/v16/cloud-infrastructure/complexes/complex/My_Complex",
       "relationship-data": [
           {
           "relationship-key": "complex.physical-location-id",
           "relationship-value": "My_Complex"
           }
           ]
       }' -k


 Check the Cloud Site creation in ONAP AAI:

 ::

   curl -X GET \
     https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions \
     -H 'Accept: application/json' \
     -H 'Authorization: Basic QUFJOkFBSQ==' \
     -H 'X-FromAppId: AAI' \
     -H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
     -H 'cache-control: no-cache' -k


 Associate an Availability zone to a Cloud site in ONAP AAI:

 ::

   curl -X PUT \
     https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/availability-zones/availability-zone/brittany \
     -H 'Accept: application/json' \
     -H 'Authorization: Basic QUFJOkFBSQ==' \
     -H 'Content-Type: application/json' \
     -H 'X-FromAppId: AAI' \
     -H 'X-TransactionId: get_aai_subscr' \
     -H 'cache-control: no-cache' \
     -d '{
       "availability-zone-name": "brittany",
       "hypervisor-type": "KVM"
   }'


 Check the operation:

 ::

   curl -X GET \
     https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/availability-zones \
     -H 'Accept: application/json' \
     -H 'Authorization: Basic QUFJOkFBSQ==' \
     -H 'Content-Type: application/json' \
     -H 'X-FromAppId: AAI' \
     -H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
     -H 'cache-control: no-cache'


 STEP 3 : Register the Cloud Site in ONAP Multicloud
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 ::

   curl -X POST \
   http://msb.api.discovery.simpledemo.onap.org:30280/api/multicloud/v1/MyCompanyName_INTEGRATION_CENTER/registry \
   -H 'Accept: application/json' \
   -H 'Cache-Control: no-cache' \
   -H 'Content-Type: application/json' \


 check registration:

 ::

   curl -X GET \
   https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER?depth=all \
   -H 'Accept: application/json' \
   -H 'Authorization: Basic QUFJOkFBSQ==' \
   -H 'Cache-Control: no-cache' \
   -H 'Content-Type: application/json' \
   -H 'Real-Time: true' \
   -H 'X-FromAppId: jimmy-postman' \
   -H 'X-TransactionId: 9999' -k
	.. This work is licensed under a Creative Commons Attribution 4.0
	.. International License. http://creativecommons.org/licenses/by/4.0
	.. Copyright 2017 AT&T Intellectual Property. All rights reserved.


	Adding a new Openstack Cloud Site to ONAP
	=========================================

	The following guide describe how to configure ONAP to be able to instantiate
	a service in a new cloud site based on Openstack.

	There are 2 methods for ONAP to communicate with Openstack in order
	to instantiate a service:

	method 1 : ONAP SO => Openstack
	method 2 : ONAP SO => ONAP MultiCloud => Openstack

	In this guideline the following parameter/value will be used

	* Complex Name: My_Complex
	* Region Name: INTEGRATION_CENTER
	* Cloud Owner: MyCompanyName


	Method 1 : without ONAP MultiCloud
	----------------------------------

	TO BE DESCRIBED



	Method 2 : using ONAP MultiCloud
	--------------------------------


	STEP 1 : declare Cloud Site in ONAP SO to interact with ONAP multiCloud
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	The MariaDB database of ONAP SO needs to be modified.

	In the ONAP SO, the use of ONAP Multicloud for that Cloud Site need
	to be indicated.

	ONAP SO will communicate with ONAP MultiCloud like if MultiCloud would be
	an Openstack system.


	Connect to ONAP SO pod

	In a Unix Terminal, to get the SO pods id that is providing
	the MariaDB database:

	::

	kubectl -n onap get pod \| grep mariadb-galera

	To connect to that SO pod
	(in this example, the SO pod id is "onap-mariadb-galera-mariadb-galera-0"):

	::

	kubectl -n onap exec -ti onap-mariadb-galera-mariadb-galera-0 sh

	Then modify the data in the MariaDB:


	A "mso_id" and "mso_pass" are required even if, with multicloud,
	only credentials managed by ESR will be used.

	Nevertheless, you need to provide a correct encrypted value for the pass value.

	"MyCompanyName" is a cloud owner value. WARNING : do not use underscore
	in the value.

	"INTEGRATION_CENTER" is the region name

	::

	mysql --user=so_admin --password=so_Admin123
	USE catalogdb
	INSERT INTO identity_services VALUES('MC_KEYSTONE', 'http://msb-iag.onap:80/api/multicloud/v1/MyCompanyName_INTEGRATION_CENTER/identity/v2.0', 'admin', '5b6f369745f5f0e1c61da7f0656f3daf93c8030a2ea94b7964c67abdcfb49bdf2fa2266344b4caaca1eba8264d277831', 'service', 'admin', 1, 'KEYSTONE', 'USERNAME_PASSWORD', 'lastUser', '2019-07-05 10:32:00', '2019-07-05 10:32:00');
	INSERT INTO cloud_sites VALUES('INTEGRATION_CENTER', 'INTEGRATION_CENTER', 'MC_KEYSTONE', 2.5, 'INTEGRATION_CENTER', NULL, NULL, NULL, 'MySelf', '2019-07-05 10:32:00', '2019-07-05 10:32:00');


	You need then to change the ONAP SO VNF Adapter Rest API endpoint version:

	in a unix terminal:

	to find the right config map name:

	::

	kubectl -n onap get configmap \| grep so-so-bpmn-infra-app-configmap


	to edit and change the configmap:

	::

	kubectl -n onap edit configmap onap-so-so-bpmn-infra-app-configmap

	in the section "vnf", modify the rest endpoint:

	::

	vnf:
	endpoint: http://so-openstack-adapter.onap:8087/services/VnfAdapter
	rest:
	- endpoint: http://so-openstack-adapter.onap:8087/services/rest/v1/vnfs
	+ endpoint: http://so-openstack-adapter.onap:8087/services/rest/v2/vnfs
	volume-groups:
	rest:
	endpoint: http://so-openstack-adapter.onapg:8087/services/rest/v1/volume-groups


	Having modified the configmap, it is necessary to delete the pod in order
	it takes the modification into account.

	to find the right pod name:

	::

	kubectl -n onap get po \| grep so-so


	You need to find the pod that is similar to the following pod id:

	"onap-so-so-6b9f64b887-jgrdp"


	to delete the pod:

	::

	kubectl -n onap delete onap-so-so-6b9f64b887-jgrdp


	Then, wait for the pod to restart. To check:

	::

	kubectl -n onap get po \| grep so-so




	STEP 2 : declare the new cloud Site in ONAP AAI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


	declare a Complex in ONAP AAI


	A Cloud Site is located in a Building called "Complex" object
	in ONAP AAI datamodel.

	AAI REST API is used to declare the complex object.

	Here is an example using "curl" tool to send the API request.

	The new Complex is named "My_Complex" in this example.


	::

	curl -X PUT \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/complexes/complex/My_Complex \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Cache-Control: no-cache' \
	-H 'Content-Type: application/json' \
	-H 'Real-Time: true' \
	-H 'X-FromAppId: jimmy-postman' \
	-H 'X-TransactionId: 9999' \
	-d '{
	"physical-location-id": "My_Complex",
	"data-center-code": "example-data-center-code-val-5556",
	"complex-name": "My_Complex",
	"identity-url": "example-identity-url-val-56898",
	"physical-location-type": "example-physical-location-type-val-7608",
	"street1": "example-street1-val-34205",
	"street2": "example-street2-val-99210",
	"city": "Beijing",
	"state": "example-state-val-59487",
	"postal-code": "100000",
	"country": "example-country-val-94173",
	"region": "example-region-val-13893",
	"latitude": "39.9042",
	"longitude": "106.4074",
	"elevation": "example-elevation-val-30253",
	"lata": "example-lata-val-46073"
	}' -k


	Check the Complexes in ONAP AAI:

	::

	curl -X GET \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/complexes \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'X-FromAppId: AAI' \
	-H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
	-H 'cache-control: no-cache' -k




	declare a Cloud Site in ONAP AAI


	To declare a Cloud Site, you need to use the AAI REST API.

	The new Cloud site is named "INTEGRATION_CENTER" in this example.

	There is also a "Cloud Owner" notion in ONAP AAI datamodel.

	The new Cloud Owner is named "MyCompanyName" in this example.

	In Openstack, there is also a "region" notion. You need to get the value of
	the region that has been set when deploying your openstack platform

	In the following example the openstack region has the value "RegionOne"
	(in the parameter "cloud-extra-info")

	parameter "complex-name" relate to the Complex you previously declared.

	parameter "cloud-type" take the value "openstack"

	parameter "cloud-region-version" is refering to your openstack version

	parameter "cloud-extra-info" will contain the Openstack "region".
	Here, the region ID of the deployed openstack cloud site will be set.

	In the following example the openstack region has the value "RegionOne".

	parameter "esr-system-info-list" will contain the list of openstack platform
	credentials that will allow ONAP MultiCloud to communicate with the Cloud Site.


	::

	curl -X PUT \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Cache-Control: no-cache' \
	-H 'Content-Type: application/json' \
	-H 'Postman-Token: 8b9b95ae-91d6-4436-90fa-69cb4d2db99c' \
	-H 'Real-Time: true' \
	-H 'X-FromAppId: jimmy-postman' \
	-H 'X-TransactionId: 9999' \
	-d '{
	"cloud-owner": "MyCompanyName",
	"cloud-region-id": "INTEGRATION_CENTER",
	"cloud-type": "openstack",
	"owner-defined-type": "N/A",
	"cloud-region-version": "pike",
	"complex-name": "My_Complex",
	"cloud-zone": "CloudZone",
	"sriov-automation": false,
	"identity-url": "WillBeUpdatedByMultiCloud",
	"cloud-extra-info":"{\"openstack-region-id\":\"RegionOne\"}"
	"esr-system-info-list": {
	"esr-system-info": [
	{
	"esr-system-info-id": "<random UUID, e.g. 5c85ce1f-aa78-4ebf-8d6f-4b62773e9bde>",
	"service-url": "http://<your openstack keystone endpoint, e.g. http://10.12.25.2:5000/v3>",
	"user-name": "<your openstack user>",
	"password": "<your openstack password>",
	"system-type": "VIM",
	"ssl-insecure": true,
	"cloud-domain": "Default",
	"default-tenant": "<your openstack project name>",
	"system-status": "active"
	}
	]
	}
	}' -k


	Associate Cloud site to a Complex in ONAP AAI:


	::

	curl -X PUT \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/relationship-list/relationship \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Content-Type: application/json' \
	-H 'X-FromAppId: AAI' \
	-H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
	-H 'cache-control: no-cache' \
	-d '{
	"related-to": "complex",
	"related-link": "/aai/v16/cloud-infrastructure/complexes/complex/My_Complex",
	"relationship-data": [
	{
	"relationship-key": "complex.physical-location-id",
	"relationship-value": "My_Complex"
	}
	]
	}' -k


	Check the Cloud Site creation in ONAP AAI:

	::

	curl -X GET \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'X-FromAppId: AAI' \
	-H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
	-H 'cache-control: no-cache' -k


	Associate an Availability zone to a Cloud site in ONAP AAI:

	::

	curl -X PUT \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/availability-zones/availability-zone/brittany \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Content-Type: application/json' \
	-H 'X-FromAppId: AAI' \
	-H 'X-TransactionId: get_aai_subscr' \
	-H 'cache-control: no-cache' \
	-d '{
	"availability-zone-name": "brittany",
	"hypervisor-type": "KVM"
	}'


	Check the operation:

	::

	curl -X GET \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER/availability-zones \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Content-Type: application/json' \
	-H 'X-FromAppId: AAI' \
	-H 'X-TransactionId: 808b54e3-e563-4144-a1b9-e24e2ed93d4f' \
	-H 'cache-control: no-cache'



	STEP 3 : Register the Cloud Site in ONAP Multicloud
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	::

	curl -X POST \
	http://msb.api.discovery.simpledemo.onap.org:30280/api/multicloud/v1/MyCompanyName_INTEGRATION_CENTER/registry \
	-H 'Accept: application/json' \
	-H 'Cache-Control: no-cache' \
	-H 'Content-Type: application/json' \


	check registration:

	::

	curl -X GET \
	https://aai.api.sparky.simpledemo.onap.org:30233/aai/v16/cloud-infrastructure/cloud-regions/cloud-region/MyCompanyName/INTEGRATION_CENTER?depth=all \
	-H 'Accept: application/json' \
	-H 'Authorization: Basic QUFJOkFBSQ==' \
	-H 'Cache-Control: no-cache' \
	-H 'Content-Type: application/json' \
	-H 'Real-Time: true' \
	-H 'X-FromAppId: jimmy-postman' \
	-H 'X-TransactionId: 9999' -k