kubernetes/vvp/charts/vvp-imagescanner/templates/configmap.yaml

# Copyright © 2018 Amdocs, AT&T, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: v1
kind: ConfigMap
metadata:
  name: imagescanner-settings
  namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/imagescanner/*").AsConfig . | indent 2 }}
---
apiVersion: v1
kind: Secret
metadata:
  name: slack-tokens
  namespace: {{ include "common.namespace" . }}
type: Opaque
data:
  notifications: ""
---
kind: Secret
apiVersion: v1
metadata:
  name: imagescanner-ssh
  namespace: {{ include "common.namespace" . }}
type: Opaque
data:
  # FIXME the imagescanner really should have its own private key, but then we
  # have to adjust the gitlab wrapper script to set two public keys as
  # deploykeys.
  id_ed25519: "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"
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: site-certificate
  namespace: {{ include "common.namespace" . }}
data:
  site.crt: |
    -----BEGIN CERTIFICATE-----
    MIIDEDCCAfgCCQDhahVKE9/eUjANBgkqhkiG9w0BAQsFADBKMRAwDgYDVQQKDAdF
    eGFtcGxlMRAwDgYDVQQLDAdleGFtcGxlMSQwIgYDVQQDDBtkZXZlbG9wbWVudC52
    dnAuZXhhbXBsZS5jb20wHhcNMTcxMjI0MTUzOTA3WhcNMTgxMjI0MTUzOTA3WjBK
    MRAwDgYDVQQKDAdFeGFtcGxlMRAwDgYDVQQLDAdleGFtcGxlMSQwIgYDVQQDDBtk
    ZXZlbG9wbWVudC52dnAuZXhhbXBsZS5jb20wggEiMA0GCSqGSIb3DQEBAQUAA4IB
    DwAwggEKAoIBAQCkvNGXe+bdvL2kvrP2L3WABt2WCFoZ2Pn8Px0eEsRiJHVD0eWz
    rgJYHFJu0C0cK9NYSKxVVI8LnKH7Ny5MFfM4Tqyr3UEOLs+fSwaAqM5tSyZU/tEK
    ractA7bi9fDk2lkcs+LLuZMqGPZ37UZcZwsUQ0BONHP668LqkWqT9hNLIN4ejInr
    32WA3Y7hPNd8Cj+AaLt1x2cXYzi9hrE5l3h9ofkOpXsgDzeIHlp4jJ6kXXQf8UM5
    1viqa2CWXHBHEG+5eftLSaeE6LAlNt5IJ6LcWEZgNtXr2es4LJC3FjXrv0gc04Cp
    U2OfizpbhT11cLGaeXOq1cUCXNIb4FcJApoXAgMBAAEwDQYJKoZIhvcNAQELBQAD
    ggEBAFGPDG9iurAhUKbFkY97xLA443U01bdwi7eAT5T9qo/RzOwcbuKWXVm1k5HK
    CQO81nlLqLQwhI1+uTTmR41epuJxyGIaDgUySB+8fLzyRSIFaxKD+UeVPgipDNZs
    h0sKSKrO6MoWzMLUYvdZRw6VIc+UpSCqPY+FKUBUHZtMpSFLnhHjRvVkiP4VvFXj
    b7jQzHughzeITygws42fKK/MK7wQ6byaMVRbPbQKPAXNxd/UrSPeX+RzKRWOZ6R8
    Ulyp7dezXCP77UaTZTsxwlurPQIZNMshDxE/SbWt0Q1g28rj5KfAjoZs5Tg/gmQ8
    LLKI/b1OvKohaANGZ6We5U+ceeU=
    -----END CERTIFICATE-----
  wrapper.sh: |
    #!/bin/sh
    # This script is meant to be used as a wrapper, so that it can be easily
    # used with docker or kubernetes' container command specification.
    #
    # Kubernetes' volumeMount creates symlinks for configMapped files at the
    # target directory.
    # Alpine's update-ca-certificates ignores symlinks.
    # So we must contrive to copy the contents of the mounted cert (a symlink)
    # into place as a normal file.
    dev_cert="${0%/*}/site.crt"
    echo >&2 "$0: Checking for site CA certificate at $dev_cert..."
    if [ -s "$dev_cert" ]; then
        echo >&2 "$0: Updating container CA certificate bundle with site certificate..."
        cp -L "$dev_cert" /usr/local/share/ca-certificates/
        update-ca-certificates
    else
        echo >&2 "$0: No site CA certificate found."
    fi
    echo >&2 "$0: Launching command: $@"
    exec "$@"