[MULTICLOUD] Uses new tpls for repos / images
This commit makes Multicloud chart to use the new generator for repositories and
images.
As new templates doesn't work well with "sub charts", we move also
subcharts to components folder.
Issue-ID: OOM-2364
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: I34049a733bddc6faf7a68e4c768c447b6c2e34b1
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt b/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt
new file mode 100644
index 0000000..7adeb62
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml
new file mode 100644
index 0000000..df5f76a
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml
@@ -0,0 +1,28 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ include "common.release" . }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml
new file mode 100644
index 0000000..b48e8dc
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml
@@ -0,0 +1,114 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ include "common.release" . }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ selector:
+ matchLabels:
+ app: {{ include "common.name" . }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ include "common.release" . }}
+ name: {{ include "common.name" . }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
+ spec:
+ containers:
+ - env:
+ - name: MSB_PROTO
+ value: {{ .Values.config.msbprotocol }}
+ - name: MSB_ADDR
+ value: "{{ .Values.config.msbgateway }}.{{ include "common.namespace" . }}"
+ - name: MSB_PORT
+ value: "{{ .Values.config.msbPort }}"
+ - name: AAI_ADDR
+ value: aai.{{ include "common.namespace" . }}
+ - name: AAI_PORT
+ value: "{{ .Values.config.aai.port }}"
+ - name: AAI_SCHEMA_VERSION
+ value: "{{ .Values.config.aai.schemaVersion }}"
+ - name: AAI_USERNAME
+ value: "{{ .Values.config.aai.username }}"
+ - name: AAI_PASSWORD
+ value: "{{ .Values.config.aai.password }}"
+ - name: SSL_ENABLED
+ value: "{{ .Values.config.ssl_enabled }}"
+ name: {{ include "common.name" . }}
+ volumeMounts:
+ - mountPath: /var/log/onap
+ name: pike-log
+ - mountPath: /opt/pike/pike/pub/config/log.yml
+ name: pike-logconfig
+ subPath: log.yml
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ httpGet:
+ path: /api/multicloud-pike/v0/swagger.json
+ port: {{ .Values.service.internalPort }}
+ scheme: HTTP
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
+ successThreshold: {{ .Values.liveness.successThreshold }}
+ failureThreshold: {{ .Values.liveness.failureThreshold }}
+ {{ end }}
+ # side car containers
+ - image: {{ include "repositoryGenerator.image.logging" . }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: filebeat-onap
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ name: filebeat-conf
+ subPath: filebeat.yml
+ - mountPath: /var/log/onap
+ name: pike-log
+ - mountPath: /usr/share/filebeat/data
+ name: pike-data-filebeat
+
+ volumes:
+ - name: pike-log
+ emptyDir: {}
+ - name: pike-data-filebeat
+ emptyDir: {}
+ - name: filebeat-conf
+ configMap:
+ name: multicloud-filebeat-configmap
+ - name: pike-logconfig
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Always
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml
new file mode 100644
index 0000000..503fae3
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml
@@ -0,0 +1,61 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ include "common.release" . }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "multicloud-pike",
+ "version": "v0",
+ "url": "/api/multicloud-pike/v0",
+ "protocol": "REST",
+ "port": "{{ .Values.service.externalPort }}",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "multicloud-pike",
+ "version": "v1",
+ "url": "/api/multicloud-pike/v1",
+ "protocol": "REST",
+ "port": "{{ .Values.service.externalPort }}",
+ "visualRange": "1"
+ }
+ ]'
+
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ include "common.release" . }}
+ type: {{ .Values.service.type }}