kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml - onap/oom - Gitiles

 # Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #xpack.graph.enabled: false
 #Set to false to disable X-Pack graph features.
 #xpack.ml.enabled: false
 #Set to false to disable X-Pack machine learning features.
 #xpack.monitoring.enabled: false
 #Set to false to disable X-Pack monitoring features.
 #xpack.reporting.enabled: false
 #Set to false to disable X-Pack reporting features.
 #xpack.security.enabled: false
 #Set to false to disable X-Pack security features.
 #xpack.watcher.enabled: false
 #Set to false to disable Watcher.
 # Kibana is served by a back end server. This setting specifies the port to use.
 server.port: {{.Values.service.externalPort}}

 # Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
 # The default is 'localhost', which usually means remote machines will not be able to connect.
 # To allow connections from remote users, set this parameter to a non-loopback address.
 server.host: "0.0.0.0"

 # Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
 # the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
 # to Kibana. This setting cannot end in a slash.
 #server.basePath: ""

 # The maximum payload size in bytes for incoming server requests.
 #server.maxPayloadBytes: 1048576

 # The Kibana server's name.  This is used for display purposes.
 server.name: "Clamp Dashboard"

 # The URL of the Elasticsearch instance to use for all your queries.
 elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}"
 # When this setting's value is true Kibana uses the hostname specified in the server.host
 # setting. When the value of this setting is false, Kibana uses the hostname of the host
 # that connects to this Kibana instance.
 #elasticsearch.preserveHost: true

 # Kibana uses an index in Elasticsearch to store saved searches, visualizations and
 # dashboards. Kibana creates a new index if the index doesn't already exist.
 #kibana.index: ".kibana"

 # The default application to load.
 #kibana.defaultAppId: "discover"

 # If your Elasticsearch is protected with basic authentication, these settings provide
 # the username and password that the Kibana server uses to perform maintenance on the Kibana
 # index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
 # is proxied through the Kibana server.
 #elasticsearch.username: "elastic"
 #elasticsearch.password: "changeme"
 # Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
 # These settings enable SSL for outgoing requests from the Kibana server to the browser.
 server.ssl.enabled: {{.Values.config.sslEnabled}}
 server.ssl.certificate: {{.Values.config.sslPemCertFilePath}}
 server.ssl.key: {{.Values.config.sslPemkeyFilePath}}

 # Optional settings that provide the paths to the PEM-format SSL certificate and key files.
 # These files validate that your Elasticsearch backend uses the same key files.
 #elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
 #elasticsearch.ssl.key: $elasticsearch_ssl_key

 # Optional setting that enables you to specify a path to the PEM file for the certificate
 # authority for your Elasticsearch instance.
 #elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities

 # To disregard the validity of SSL certificates, change this setting's value to 'none'.
 #elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode

 # Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
 # the elasticsearch.requestTimeout setting.
 #elasticsearch.pingTimeout: 1500

 # Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
 # must be a positive integer.
 #elasticsearch.requestTimeout: 30000

 # List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
 # headers, set this value to [] (an empty list).
 #elasticsearch.requestHeadersWhitelist: [ authorization ]

 # Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
 # by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
 #elasticsearch.customHeaders: {}

 # Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
 #elasticsearch.shardTimeout: 0

 # Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
 #elasticsearch.startupTimeout: 5000

 # Specifies the path where Kibana creates the process ID file.
 #pid.file: /var/run/kibana.pid

 # Enables you specify a file where Kibana stores log output.
 #logging.dest: stdout

 # Set the value of this setting to true to suppress all logging output.
 #logging.silent: false

 # Set the value of this setting to true to suppress all logging output other than error messages.
 #logging.quiet: false

 # Set the value of this setting to true to log all events, including system usage information
 # and all requests.
 #logging.verbose: false

 # Set the interval in milliseconds to sample system and process performance
 # metrics. Minimum is 100ms. Defaults to 5000.
 #ops.interval: 5000

 # The default locale. This locale can be used in certain circumstances to substitute any missing
 # translations.
 #i18n.defaultLocale: "en"

 ## Search Guard
 #
 xpack.security.enabled: false
 elasticsearch.username: {{.Values.config.elasticUSR}}
 elasticsearch.password: {{.Values.config.elasticPWD}}

 searchguard.cookie.password: 123567818187654rwrwfsfshdhdhtegdhfzftdhncn
	# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#xpack.graph.enabled: false
	#Set to false to disable X-Pack graph features.
	#xpack.ml.enabled: false
	#Set to false to disable X-Pack machine learning features.
	#xpack.monitoring.enabled: false
	#Set to false to disable X-Pack monitoring features.
	#xpack.reporting.enabled: false
	#Set to false to disable X-Pack reporting features.
	#xpack.security.enabled: false
	#Set to false to disable X-Pack security features.
	#xpack.watcher.enabled: false
	#Set to false to disable Watcher.
	# Kibana is served by a back end server. This setting specifies the port to use.
	server.port: {{.Values.service.externalPort}}

	# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
	# The default is 'localhost', which usually means remote machines will not be able to connect.
	# To allow connections from remote users, set this parameter to a non-loopback address.
	server.host: "0.0.0.0"

	# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
	# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
	# to Kibana. This setting cannot end in a slash.
	#server.basePath: ""

	# The maximum payload size in bytes for incoming server requests.
	#server.maxPayloadBytes: 1048576

	# The Kibana server's name. This is used for display purposes.
	server.name: "Clamp Dashboard"

	# The URL of the Elasticsearch instance to use for all your queries.
	elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}"
	# When this setting's value is true Kibana uses the hostname specified in the server.host
	# setting. When the value of this setting is false, Kibana uses the hostname of the host
	# that connects to this Kibana instance.
	#elasticsearch.preserveHost: true

	# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
	# dashboards. Kibana creates a new index if the index doesn't already exist.
	#kibana.index: ".kibana"

	# The default application to load.
	#kibana.defaultAppId: "discover"

	# If your Elasticsearch is protected with basic authentication, these settings provide
	# the username and password that the Kibana server uses to perform maintenance on the Kibana
	# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
	# is proxied through the Kibana server.
	#elasticsearch.username: "elastic"
	#elasticsearch.password: "changeme"
	# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
	# These settings enable SSL for outgoing requests from the Kibana server to the browser.
	server.ssl.enabled: {{.Values.config.sslEnabled}}
	server.ssl.certificate: {{.Values.config.sslPemCertFilePath}}
	server.ssl.key: {{.Values.config.sslPemkeyFilePath}}

	# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
	# These files validate that your Elasticsearch backend uses the same key files.
	#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
	#elasticsearch.ssl.key: $elasticsearch_ssl_key

	# Optional setting that enables you to specify a path to the PEM file for the certificate
	# authority for your Elasticsearch instance.
	#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities

	# To disregard the validity of SSL certificates, change this setting's value to 'none'.
	#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode

	# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
	# the elasticsearch.requestTimeout setting.
	#elasticsearch.pingTimeout: 1500

	# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
	# must be a positive integer.
	#elasticsearch.requestTimeout: 30000

	# List of Kibana client-side headers to send to Elasticsearch. To send no client-side
	# headers, set this value to [] (an empty list).
	#elasticsearch.requestHeadersWhitelist: [ authorization ]

	# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
	# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
	#elasticsearch.customHeaders: {}

	# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
	#elasticsearch.shardTimeout: 0

	# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
	#elasticsearch.startupTimeout: 5000

	# Specifies the path where Kibana creates the process ID file.
	#pid.file: /var/run/kibana.pid

	# Enables you specify a file where Kibana stores log output.
	#logging.dest: stdout

	# Set the value of this setting to true to suppress all logging output.
	#logging.silent: false

	# Set the value of this setting to true to suppress all logging output other than error messages.
	#logging.quiet: false

	# Set the value of this setting to true to log all events, including system usage information
	# and all requests.
	#logging.verbose: false

	# Set the interval in milliseconds to sample system and process performance
	# metrics. Minimum is 100ms. Defaults to 5000.
	#ops.interval: 5000

	# The default locale. This locale can be used in certain circumstances to substitute any missing
	# translations.
	#i18n.defaultLocale: "en"

	## Search Guard
	#
	xpack.security.enabled: false
	elasticsearch.username: {{.Values.config.elasticUSR}}
	elasticsearch.password: {{.Values.config.elasticPWD}}

	searchguard.cookie.password: 123567818187654rwrwfsfshdhdhtegdhfzftdhncn