kubernetes/log/charts/log-logstash/resources/config/onap-pipeline.conf - onap/oom - Gitiles

 # Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 input {
  beats {

  ## Add a id to plugin configuration. Can be anything unique.
  id => 'beats_plugin'

  ######## Connection configurations ########

  ## The port to listen on.
  port => {{.Values.service.externalPort}}

  ## Close Idle clients after the specified time in seconds. Default is 60 seconds
  #client_inactivity_timeout => 60

  ######## Security configurations ########

  ## Enable encryption. Default false.
  #ssl => $filebeat_ssl

  ## ssl certificate path.
  #ssl_certificate => $filebeat_ssl_certificate

  ## SSL key to use.
  #ssl_key => $filebeat_ssl_key

  ##SSL key passphrase to use.
  #ssl_key_passphrase => $filebeat_ssl_key_passphrase

  ## Value can be any of: none, peer, force_peer.
  #ssl_verify_mode => $filebeat_ssl_verify_mode

  ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms.
  #ssl_handshake_timeout => 10000
  include_codec_tag => false
  }
 }


 filter {
   grok {
     break_on_match => false
     match => {
       "source" => ["/var/log/onap/(?<componentName>[^/]+)/",
                    "/var/log/onap/%{GREEDYDATA:componentLogFile}"
                   ]
     }
   }

  # Filter for log4j xml events
  if "</log4j:event>" in [message] {

    #mutate { add_field => { "orgmsg_log4j" => "%{message}" } }    # Copy of orginal msg for debug

    #Filter to parse xml event and retrieve data
    xml {
      source => "message"
      store_xml => false
      remove_namespaces => true
      target => "xml_content"
      xpath => [ "/event/message/text()", "logmsg" ,
                 "/event/@logger", "Logger",
                 "/event/@timestamp", "Timestamp",
                 "/event/@level", "loglevel",
                 "/event/@thread", "Thread",
                 "/event/throwable/text()", "Exceptionthrowable",
                 "/event/NDC/text()", "NDCs",
                 "/event/properties/data/@name","mdcname",
                 "/event/properties/data/@value","mdcvalue"]

     }

    #Ruby filter to iterate and separate MDCs into documents
    ruby {
      code => '
        $i = 0
        $num = 0
        if event.get("[mdcname]")
          $num = event.get("[mdcname]").length
        end
 	   if $num != 0
         until $i > $num do
          if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i)
             event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i))
          end
          $i=$i+1
         end
 	   end
           '
     }

    #Validations
    if [Exceptionthrowable]
    {
       mutate {
         replace => {
            "exceptionmessage" => "%{[Exceptionthrowable]}"
         }
       }
     }

    if [NDCs]
    {
       mutate {
         replace => {
           "NDC" => "%{[NDCs]}"
         }
       }
    }

    mutate {
      replace => {
         "Logger" =>"%{[Logger]}"
         "logmsg" =>"%{[logmsg]}"
         "Timestamp" =>"%{[Timestamp]}"
         "loglevel" =>"%{[loglevel]}"
         "message" => "%{logmsg}"
         "Thread" => "%{[Thread]}"
      }
      remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"]
    }

    if [Timestamp]
    {
      date {
         match => ["Timestamp", "UNIX_MS"]
         target => "Timestamp"
      }
    }
  }
  # Filter for logback events
  else {

   #mutate { add_field => { "orgmsg" => "%{message}" } }    # Copy of orginal msg for debug

   mutate {
     gsub => [
       'message', ' = ', '=',
       'message', '= ', '=null',
       'message', '=\t', '=null	', #This null is followed by a tab
       'message', '\t$', '\t'
     ]
   }
   # The grok below parses the message field for all current logback patterns used by oom components.
   # Example logback pattern: %d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}|%X{RequestId}|%msg
   # Example grok pattern:    %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}
   # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq
   grok {
     match => {
       "message" => [
                     "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}",
                     "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}",
                     "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}"
       ]
     }
     overwrite => ["message"]
   }
   # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values.
   kv {
     source => "MDCs"
     field_split => ",\t"
     trim_key => "\s"
     trim_value => "\s"
     remove_field => [ "MDCs" ]
   }

   if (![Timestamp] and [EndTimestamp]) {
     mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } }
   }
   date {
     match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ]
     target => "Timestamp"
   }

   mutate {
     remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"]
   }

   if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") {
     #Parse kvps in message
     kv {
       field_split => "\s"
       trim_key => "\s"
       trim_value => "\s"
     }

     #If Request Id is missing and DID is present use as RequestId
     if (![RequestId] and [DID] =~ /.+/) {
       mutate { add_field => { "RequestId" => "%{DID}" } }
     }
   }

  } #Close else statement for logback events
 } #Close filter


 output {
  elasticsearch {
  id => 'onap_es'

  ######### Security configurations #########

  user => "elastic"
  password => "changeme"

  ## The .cer or .pem file to validate the server's certificate
  #cacert => $es_cacert

  ## The keystore used to present a certificate to the server. It can be either .jks or .p12
  #keystore => $es_keystore
  #keystore_password => $es_keystore_password

  ## Enable SSL/TLS secured communication to Elasticsearch cluster.
  ## Default is not set which in that case depends on the protocol specidfied in hosts list
  #ssl => $es_ssl

  ## Option to validate the server's certificate. Default is true
  #ssl_certificate_verification => $es_ssl_certificate_verification

  ## The JKS truststore to validate the server's certificate.
  #truststore => $es_truststore
  #truststore_password => $es_truststore_password


  ######### Elasticsearchcluster and host configurations #########

  ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
  hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]


  ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
  sniffing => true

  ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds.
  #sniffing_delay => 5

  ## Set the address of a forward HTTP proxy.
  #proxy => $es_proxy

  ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives
  #path => $es_path

  ######### Elasticsearch request configurations #########

  ## This setting defines the maximum sized bulk request Logstash will make.
  #flush_size => ?

  ######### Document configurations #########

  index => "logstash-%{+YYYY.MM.dd}"
  document_type => "logs"

  ## This can be used to associate child documents with a parent using the parent ID.
  #parent => "abcd'
  }
 }
	# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	input {
	beats {

	## Add a id to plugin configuration. Can be anything unique.
	id => 'beats_plugin'

	######## Connection configurations ########

	## The port to listen on.
	port => {{.Values.service.externalPort}}

	## Close Idle clients after the specified time in seconds. Default is 60 seconds
	#client_inactivity_timeout => 60

	######## Security configurations ########

	## Enable encryption. Default false.
	#ssl => $filebeat_ssl

	## ssl certificate path.
	#ssl_certificate => $filebeat_ssl_certificate

	## SSL key to use.
	#ssl_key => $filebeat_ssl_key

	##SSL key passphrase to use.
	#ssl_key_passphrase => $filebeat_ssl_key_passphrase

	## Value can be any of: none, peer, force_peer.
	#ssl_verify_mode => $filebeat_ssl_verify_mode

	## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms.
	#ssl_handshake_timeout => 10000
	include_codec_tag => false
	}
	}


	filter {
	grok {
	break_on_match => false
	match => {
	"source" => ["/var/log/onap/(?<componentName>[^/]+)/",
	"/var/log/onap/%{GREEDYDATA:componentLogFile}"
	]
	}
	}

	# Filter for log4j xml events
	if "</log4j:event>" in [message] {

	#mutate { add_field => { "orgmsg_log4j" => "%{message}" } } # Copy of orginal msg for debug

	#Filter to parse xml event and retrieve data
	xml {
	source => "message"
	store_xml => false
	remove_namespaces => true
	target => "xml_content"
	xpath => [ "/event/message/text()", "logmsg" ,
	"/event/@logger", "Logger",
	"/event/@timestamp", "Timestamp",
	"/event/@level", "loglevel",
	"/event/@thread", "Thread",
	"/event/throwable/text()", "Exceptionthrowable",
	"/event/NDC/text()", "NDCs",
	"/event/properties/data/@name","mdcname",
	"/event/properties/data/@value","mdcvalue"]

	}

	#Ruby filter to iterate and separate MDCs into documents
	ruby {
	code => '
	$i = 0
	$num = 0
	if event.get("[mdcname]")
	$num = event.get("[mdcname]").length
	end
	if $num != 0
	until $i > $num do
	if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i)
	event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i))
	end
	$i=$i+1
	end
	end
	'
	}

	#Validations
	if [Exceptionthrowable]
	{
	mutate {
	replace => {
	"exceptionmessage" => "%{[Exceptionthrowable]}"
	}
	}
	}

	if [NDCs]
	{
	mutate {
	replace => {
	"NDC" => "%{[NDCs]}"
	}
	}
	}

	mutate {
	replace => {
	"Logger" =>"%{[Logger]}"
	"logmsg" =>"%{[logmsg]}"
	"Timestamp" =>"%{[Timestamp]}"
	"loglevel" =>"%{[loglevel]}"
	"message" => "%{logmsg}"
	"Thread" => "%{[Thread]}"
	}
	remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"]
	}

	if [Timestamp]
	{
	date {
	match => ["Timestamp", "UNIX_MS"]
	target => "Timestamp"
	}
	}
	}
	# Filter for logback events
	else {

	#mutate { add_field => { "orgmsg" => "%{message}" } } # Copy of orginal msg for debug

	mutate {
	gsub => [
	'message', ' = ', '=',
	'message', '= ', '=null',
	'message', '=\t', '=null ', #This null is followed by a tab
	'message', '\t$', '\t'
	]
	}
	# The grok below parses the message field for all current logback patterns used by oom components.
	# Example logback pattern: %d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\|%X{RequestId}\|%msg
	# Example grok pattern: %{TIMESTAMP_ISO8601:Timestamp}\\|%{UUID:RequestId}\\|%{GREEDYDATA:message}
	# Use the following command to find all logback patterns in oom directory: find oom -name "logbackxml" -exec grep "property.attern.*value" {} \;\|sort\|uniq
	grok {
	match => {
	"message" => [
	"%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:BeginTimestamp}\\|%{TIMESTAMP_ISO8601:EndTimestamp}\\|%{UUID:RequestId}\\|%{GREEDYDATA:ServiceInstanceId}\\|%{GREEDYDATA:Thread}\\|%{GREEDYDATA:Unknown1}\\|%{GREEDYDATA:ServiceName}\\|%{GREEDYDATA:PartnerName}\\|%{GREEDYDATA:TargetEntity}\\|%{GREEDYDATA:TargetServiceName}\\|%{GREEDYDATA:StatusCode}\\|%{GREEDYDATA:ResponseCode}\\|%{GREEDYDATA:ResponseDesc}\\|%{UUID:InstanceUUID}\\|%{GREEDYDATA:loglevel}\\|%{GREEDYDATA:AlertSeverity}\\|%{IP:ServerIPAddress}\\|%{GREEDYDATA:Timer}\\|%{HOSTNAME:ServerFQDN}\\|%{IPORHOST:RemoteHost}\\|%{GREEDYDATA:Unknown2}\\|%{GREEDYDATA:Unknown3}\\|%{GREEDYDATA:Unknown4}\\|%{GREEDYDATA:TargetVirtualEntity}\\|%{GREEDYDATA:Unknown5}\\|%{GREEDYDATA:Unknown6}\\|%{GREEDYDATA:Unknown7}\\|%{GREEDYDATA:Unknown8}\\|%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:BeginTimestamp}\\|%{TIMESTAMP_ISO8601:EndTimestamp}\\|%{UUID:RequestId}\\|%{GREEDYDATA:ServiceInstanceId}\\|%{GREEDYDATA:Thread}\\|%{GREEDYDATA:Unknown1}\\|%{GREEDYDATA:ServiceName}\\|%{GREEDYDATA:PartnerName}\\|%{GREEDYDATA:StatusCode}\\|%{GREEDYDATA:ResponseCode}\\|%{GREEDYDATA:ResponseDesc}\\|%{UUID:InstanceUUID}\\|%{GREEDYDATA:loglevel}\\|%{GREEDYDATA:AlertSeverity}\\|%{IP:ServerIPAddress}\\|%{GREEDYDATA:Timer}\\|%{HOSTNAME:ServerFQDN}\\|%{IPORHOST:RemoteHost}\\|%{GREEDYDATA:Unknown2}\\|%{GREEDYDATA:Unknown3}\\|%{GREEDYDATA:Unknown4}\\|%{GREEDYDATA:Unknown5}\\|%{GREEDYDATA:Unknown6}\\|%{GREEDYDATA:Unknown7}\\|%{GREEDYDATA:Unknown8}\\|%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:Timestamp}\\|%{UUID:RequestId}\\|%{GREEDYDATA:ServiceInstanceId}\\|%{GREEDYDATA:Thread}\\|%{GREEDYDATA:ServiceName}\\|%{UUID:InstanceUUID}\\|%{GREEDYDATA:loglevel}\\|%{GREEDYDATA:AlertSeverity}\\|%{IP:ServerIPAddress}\\|%{HOSTNAME:ServerFQDN}\\|%{IPORHOST:RemoteHost}\\|%{GREEDYDATA:Timer}\\|\[%{GREEDYDATA:caller}\]\\|%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:Timestamp}\\|%{GREEDYDATA:RequestId}\\|%{GREEDYDATA:Thread}\\|%{GREEDYDATA:ServiceName}\\|%{GREEDYDATA:PartnerName}\\|%{GREEDYDATA:TargetEntity}\\|%{GREEDYDATA:TargetServiceName}\\|%{GREEDYDATA:loglevel}\\|%{GREEDYDATA:ErrorCode}\\|%{GREEDYDATA:ErrorDesc}\\|%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:Timestamp}\\|%{GREEDYDATA:RequestId}\\|%{GREEDYDATA:Thread}\\|%{GREEDYDATA:ClassName}\\|%{GREEDYDATA:message}",
	"%{TIMESTAMP_ISO8601:Timestamp}\\|%{UUID:RequestId}\\|%{GREEDYDATA:message}",
	"\[%{TIMESTAMP_ISO8601:Timestamp}\\|%{LOGLEVEL:loglevel}\\|%{GREEDYDATA:Logger}\\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}"
	]
	}
	overwrite => ["message"]
	}
	# The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values.
	kv {
	source => "MDCs"
	field_split => ",\t"
	trim_key => "\s"
	trim_value => "\s"
	remove_field => [ "MDCs" ]
	}

	if (![Timestamp] and [EndTimestamp]) {
	mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } }
	}
	date {
	match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ]
	target => "Timestamp"
	}

	mutate {
	remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"]
	}

	if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") {
	#Parse kvps in message
	kv {
	field_split => "\s"
	trim_key => "\s"
	trim_value => "\s"
	}

	#If Request Id is missing and DID is present use as RequestId
	if (![RequestId] and [DID] =~ /.+/) {
	mutate { add_field => { "RequestId" => "%{DID}" } }
	}
	}

	} #Close else statement for logback events
	} #Close filter


	output {
	elasticsearch {
	id => 'onap_es'

	######### Security configurations #########

	user => "elastic"
	password => "changeme"

	## The .cer or .pem file to validate the server's certificate
	#cacert => $es_cacert

	## The keystore used to present a certificate to the server. It can be either .jks or .p12
	#keystore => $es_keystore
	#keystore_password => $es_keystore_password

	## Enable SSL/TLS secured communication to Elasticsearch cluster.
	## Default is not set which in that case depends on the protocol specidfied in hosts list
	#ssl => $es_ssl

	## Option to validate the server's certificate. Default is true
	#ssl_certificate_verification => $es_ssl_certificate_verification

	## The JKS truststore to validate the server's certificate.
	#truststore => $es_truststore
	#truststore_password => $es_truststore_password


	######### Elasticsearchcluster and host configurations #########

	##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
	hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]


	## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
	sniffing => true

	## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds.
	#sniffing_delay => 5

	## Set the address of a forward HTTP proxy.
	#proxy => $es_proxy

	##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives
	#path => $es_path

	######### Elasticsearch request configurations #########

	## This setting defines the maximum sized bulk request Logstash will make.
	#flush_size => ?

	######### Document configurations #########

	index => "logstash-%{+YYYY.MM.dd}"
	document_type => "logs"

	## This can be used to associate child documents with a parent using the parent ID.
	#parent => "abcd'
	}
	}