docs/BuildGuide.rst - onap/oom/offline-installer - Gitiles

 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
 .. http://creativecommons.org/licenses/by/4.0
 .. Copyright 2019 Samsung Electronics Co., Ltd.

 OOM ONAP Offline Installer Package Build Guide
 =============================================================

 This document is describing procedure for building offline installer packages. It is supposed to be triggered on server with internet connectivity and will download all artifacts required for ONAP deployment based on our static lists. The server used for the procedure in this guide is preferred to be separate build server.

 Procedure was completely tested on RHEL 7.6 as it’s tested target platform, however with small adaptations it should be applicable also for other platforms.
 Some discrepancies when Centos 7.6 is used are described below as well.

 Part 1. Preparations
 --------------------

 We assume that procedure is executed on RHEL 7.6 server with \~300G disc space, 16G+ RAM and internet connectivity

 Some additional sw packages are required by ONAP Offline platform building tooling. in order to install them
 following repos has to be configured for RHEL 7.6 platform.


 .. note::
    All commands stated in this guide are meant to be run in root shell.

 ::

     ############
     # RHEL 7.6 #
     ############

     # Register server
     subscription-manager register --username <rhel licence name> --password <password> --auto-attach

     # required by special centos docker recommended by ONAP
     yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

     # required by docker dependencies i.e. docker-selinux
     subscription-manager repos --enable=rhel-7-server-extras-rpms

     # epel is required by npm within blob build
     rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

 Alternatively

 ::

    ##############
    # Centos 7.6 #
    ##############

    # required by special centos docker recommended by ONAP
    yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

    # enable epel repo for npm and jq
    yum install -y epel-release

 Subsequent steps are the same on both platforms:

 ::

     # install following packages
     yum install -y docker-ce-18.09.5 python-pip git createrepo expect nodejs npm jq

     # install Python 3 (download scripts don't support Python 2 anymore)
     yum install -y python36 python36-pip

     # docker daemon must be running on host
     service docker start

 Then it is necessary to clone all installer and build related repositories and prepare the directory structure.

 ::

     # prepare the onap build directory structure
     cd /tmp
     git clone https://gerrit.onap.org/r/oom/offline-installer onap-offline
     cd onap-offline

     # install required pip packages for build and download scripts
     pip3 install -r ./build/requirements.txt
     pip3 install -r ./build/download/requirements.txt

 Part 2. Download artifacts for offline installer
 ------------------------------------------------

 .. note::
    It is possible to generate actual list of docker images using docker-images-collector.sh (helm is required) from cloned OOM directory
    based on enabled subsystems.

    In the beginning of the generated list is written commit number from which it was created - the same commit number should be used
    in Part 4. Packages preparation.

    Following example will create the list to the default path:
    ::

     # clone the OOM repository
     git clone https://gerrit.onap.org/r/oom -b master --recurse-submodules /tmp/oom

     # docker-images-collector.sh script uses oom/kubernetes/onap/resources/overrides/onap-all.yaml file to find what subsystems
     are enabled. By default all subsystems are enabled there. Modify the file if want to drop some subsystems.

     #run the collector providing path the the project
     ./build/creating_data/docker-images-collector.sh /tmp/oom/kubernetes/onap

    For the other options check the usage of the script.

 .. note:: Skip this step if you have already all necessary resources and continue with Part 3. Populate local nexus


 There need to be created RPM repository containing packages which need to be installed on all nodes.

 ::

     # run the docker container with -d parameter for destination directory with RPM packages
     ./offline-installer/build/create_repo.sh -d $(pwd)

 .. note:: If script fails with permissions, problem could be with SeLinux. Issue is possible to solve by:
     ::

       # Change security context of directory
       chcon -Rt svirt_sandbox_file_t $(pwd)

 It's possible to download rest artifacts in single ./download.py execution. Recently we improved reliability of download scripts
 so one might try following command to download most of the required artifacts in single shot.

 ::

         # following arguments are provided
         # all data lists are taken from ./build/data_lists/ folder
         # all resources will be stored in expected folder structure within ../resources folder

         ./build/download/download.py --docker ./build/data_lists/infra_docker_images.list ../resources/offline_data/docker_images_infra \
         --http ./build/data_lists/infra_bin_utils.list ../resources/downloads

         # following docker images do not necessarily need to be stored under resources as they load into repository in next part
         # if second argument for --docker is not present, images are just pulled and cached.
         # Warning: script must be run twice separately, for more details run download.py --help
         ./build/download/download.py --docker ./build/data_lists/rke_docker_images.list \
         --docker ./build/data_lists/k8s_docker_images.list \
         --docker ./build/data_lists/onap_docker_images.list \


 Alternatively, step-by-step procedure is described in Appendix 1.

 This concludes SW download part required for ONAP offline platform creating.

 Part 3. Populate local nexus
 ----------------------------

 Prerequisites:

 - All data lists and resources which are pushed to local nexus repository are available
 - Following ports are not occupied by another service: 80, 8081, 8082, 10001
 - There's no docker container called "nexus"

 .. note:: In case you skipped the Part 2 for the artifacts download, please ensure that the onap docker images are cached and copy of resources data are untarred in *./onap-offline/../resources/*

 ::

         #Whole nexus blob data will be created by running script build_nexus_blob.sh.
         ./onap-offline/build/build_nexus_blob.sh

 It will load the listed docker images, run the Nexus, configure it as npm, pypi
 and docker repositories. Then it will push all listed docker images to the repositories. After all is done the repository container is stopped.

 .. note:: In the current release scope we aim to maintain just single example data lists set, tags used in previous releases are not needed. Datalists are also covering latest versions verified by us despite user is allowed to build data lists on his own.


 Part 4. Packages preparation
 --------------------------------------------------------

 ONAP offline deliverable consist of 3 packages:

 +---------------------------------------+------------------------------------------------------------------------------+
 | Package                               | Description                                                                  |
 +=======================================+==============================================================================+
 | sw_package.tar                        | Contains installation software and configuration for infrastructure and ONAP |
 +---------------------------------------+------------------------------------------------------------------------------+
 | resources_package.tar                 | Contains all input files  needed to deploy infrastructure and ONAP           |
 +---------------------------------------+------------------------------------------------------------------------------+
 | aux_package.tar                       | Contains auxiliary input files that can be added to ONAP                     |
 +---------------------------------------+------------------------------------------------------------------------------+

 All packages can be created using script build/package.py. Beside of archiving files gathered in the previous steps, script also builds docker images used in on infra server.

 From onap-offline directory run:

 ::

   ./build/package.py <helm charts repo> --build-version <version> --application-repository_reference <commit/tag/branch> --output-dir <target\_dir> --resources-directory <target\_dir>

 For example:

 ::

   ./build/package.py https://gerrit.onap.org/r/oom --application-repository_reference master --output-dir /tmp/packages --resources-directory /tmp/resources


 In the target directory you should find tar files:

 ::

   sw_package.tar
   resources_package.tar
   aux_package.tar
	.. This work is licensed under a Creative Commons Attribution 4.0 International License.
	.. http://creativecommons.org/licenses/by/4.0
	.. Copyright 2019 Samsung Electronics Co., Ltd.

	OOM ONAP Offline Installer Package Build Guide
	=============================================================

	This document is describing procedure for building offline installer packages. It is supposed to be triggered on server with internet connectivity and will download all artifacts required for ONAP deployment based on our static lists. The server used for the procedure in this guide is preferred to be separate build server.

	Procedure was completely tested on RHEL 7.6 as it’s tested target platform, however with small adaptations it should be applicable also for other platforms.
	Some discrepancies when Centos 7.6 is used are described below as well.

	Part 1. Preparations
	--------------------

	We assume that procedure is executed on RHEL 7.6 server with \~300G disc space, 16G+ RAM and internet connectivity

	Some additional sw packages are required by ONAP Offline platform building tooling. in order to install them
	following repos has to be configured for RHEL 7.6 platform.



	.. note::
	All commands stated in this guide are meant to be run in root shell.

	::

	############
	# RHEL 7.6 #
	############

	# Register server
	subscription-manager register --username <rhel licence name> --password <password> --auto-attach

	# required by special centos docker recommended by ONAP
	yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

	# required by docker dependencies i.e. docker-selinux
	subscription-manager repos --enable=rhel-7-server-extras-rpms

	# epel is required by npm within blob build
	rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

	Alternatively

	::

	##############
	# Centos 7.6 #
	##############

	# required by special centos docker recommended by ONAP
	yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

	# enable epel repo for npm and jq
	yum install -y epel-release

	Subsequent steps are the same on both platforms:

	::

	# install following packages
	yum install -y docker-ce-18.09.5 python-pip git createrepo expect nodejs npm jq

	# install Python 3 (download scripts don't support Python 2 anymore)
	yum install -y python36 python36-pip

	# docker daemon must be running on host
	service docker start

	Then it is necessary to clone all installer and build related repositories and prepare the directory structure.

	::

	# prepare the onap build directory structure
	cd /tmp
	git clone https://gerrit.onap.org/r/oom/offline-installer onap-offline
	cd onap-offline

	# install required pip packages for build and download scripts
	pip3 install -r ./build/requirements.txt
	pip3 install -r ./build/download/requirements.txt

	Part 2. Download artifacts for offline installer
	------------------------------------------------

	.. note::
	It is possible to generate actual list of docker images using docker-images-collector.sh (helm is required) from cloned OOM directory
	based on enabled subsystems.

	In the beginning of the generated list is written commit number from which it was created - the same commit number should be used
	in Part 4. Packages preparation.

	Following example will create the list to the default path:
	::

	# clone the OOM repository
	git clone https://gerrit.onap.org/r/oom -b master --recurse-submodules /tmp/oom

	# docker-images-collector.sh script uses oom/kubernetes/onap/resources/overrides/onap-all.yaml file to find what subsystems
	are enabled. By default all subsystems are enabled there. Modify the file if want to drop some subsystems.

	#run the collector providing path the the project
	./build/creating_data/docker-images-collector.sh /tmp/oom/kubernetes/onap

	For the other options check the usage of the script.

	.. note:: Skip this step if you have already all necessary resources and continue with Part 3. Populate local nexus


	There need to be created RPM repository containing packages which need to be installed on all nodes.

	::

	# run the docker container with -d parameter for destination directory with RPM packages
	./offline-installer/build/create_repo.sh -d $(pwd)

	.. note:: If script fails with permissions, problem could be with SeLinux. Issue is possible to solve by:
	::

	# Change security context of directory
	chcon -Rt svirt_sandbox_file_t $(pwd)

	It's possible to download rest artifacts in single ./download.py execution. Recently we improved reliability of download scripts
	so one might try following command to download most of the required artifacts in single shot.

	::

	# following arguments are provided
	# all data lists are taken from ./build/data_lists/ folder
	# all resources will be stored in expected folder structure within ../resources folder

	./build/download/download.py --docker ./build/data_lists/infra_docker_images.list ../resources/offline_data/docker_images_infra \
	--http ./build/data_lists/infra_bin_utils.list ../resources/downloads

	# following docker images do not necessarily need to be stored under resources as they load into repository in next part
	# if second argument for --docker is not present, images are just pulled and cached.
	# Warning: script must be run twice separately, for more details run download.py --help
	./build/download/download.py --docker ./build/data_lists/rke_docker_images.list \
	--docker ./build/data_lists/k8s_docker_images.list \
	--docker ./build/data_lists/onap_docker_images.list \


	Alternatively, step-by-step procedure is described in Appendix 1.

	This concludes SW download part required for ONAP offline platform creating.

	Part 3. Populate local nexus
	----------------------------

	Prerequisites:

	- All data lists and resources which are pushed to local nexus repository are available
	- Following ports are not occupied by another service: 80, 8081, 8082, 10001
	- There's no docker container called "nexus"

	.. note:: In case you skipped the Part 2 for the artifacts download, please ensure that the onap docker images are cached and copy of resources data are untarred in ./onap-offline/../resources/

	::

	#Whole nexus blob data will be created by running script build_nexus_blob.sh.
	./onap-offline/build/build_nexus_blob.sh

	It will load the listed docker images, run the Nexus, configure it as npm, pypi
	and docker repositories. Then it will push all listed docker images to the repositories. After all is done the repository container is stopped.

	.. note:: In the current release scope we aim to maintain just single example data lists set, tags used in previous releases are not needed. Datalists are also covering latest versions verified by us despite user is allowed to build data lists on his own.


	Part 4. Packages preparation
	--------------------------------------------------------

	ONAP offline deliverable consist of 3 packages:

	+---------------------------------------+------------------------------------------------------------------------------+
	\| Package \| Description \|
	+=======================================+==============================================================================+
	\| sw_package.tar \| Contains installation software and configuration for infrastructure and ONAP \|
	+---------------------------------------+------------------------------------------------------------------------------+
	\| resources_package.tar \| Contains all input files needed to deploy infrastructure and ONAP \|
	+---------------------------------------+------------------------------------------------------------------------------+
	\| aux_package.tar \| Contains auxiliary input files that can be added to ONAP \|
	+---------------------------------------+------------------------------------------------------------------------------+

	All packages can be created using script build/package.py. Beside of archiving files gathered in the previous steps, script also builds docker images used in on infra server.

	From onap-offline directory run:

	::

	./build/package.py <helm charts repo> --build-version <version> --application-repository_reference <commit/tag/branch> --output-dir <target\_dir> --resources-directory <target\_dir>

	For example:

	::

	./build/package.py https://gerrit.onap.org/r/oom --application-repository_reference master --output-dir /tmp/packages --resources-directory /tmp/resources


	In the target directory you should find tar files:

	::

	sw_package.tar
	resources_package.tar
	aux_package.tar