project-configs/maven/conf/settings.xml - onap/policy/drools-pdp - Gitiles

 <?xml version="1.0" encoding="UTF-8"?>
 <!--
   ============LICENSE_START=======================================================
   ECOMP Policy Engine - Drools PDP
   ================================================================================
   Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
   ================================================================================
   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
   ============LICENSE_END=========================================================
   -->


 <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor
 	license agreements. See the NOTICE file distributed with this work for additional
 	information regarding copyright ownership. The ASF licenses this file to
 	you under the Apache License, Version 2.0 (the "License"); you may not use
 	this file except in compliance with the License. You may obtain a copy of
 	the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required
 	by applicable law or agreed to in writing, software distributed under the
 	License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
 	OF ANY KIND, either express or implied. See the License for the specific
 	language governing permissions and limitations under the License. -->


 <!-- | This is the configuration file for Maven. It can be specified at two
 	levels: | | 1. User Level. This settings.xml file provides configuration
 	for a single user, | and is normally provided in ${user.home}/.m2/settings.xml.
 	| | NOTE: This location can be overridden with the CLI option: | | -s /path/to/user/settings.xml
 	| | 2. Global Level. This settings.xml file provides configuration for all
 	Maven | users on a machine (assuming they're all using the same Maven | installation).
 	It's normally provided in | ${maven.home}/conf/settings.xml. | | NOTE: This
 	location can be overridden with the CLI option: | | -gs /path/to/global/settings.xml
 	| | The sections in this sample file are intended to give you a running start
 	at | getting the most out of your Maven installation. Where appropriate,
 	the default | values (values used when the setting is not specified) are
 	provided. | | -->
 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
 	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 	xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
 	<!-- localRepository | The path to the local repository maven will use to
 		store artifacts. | | Default: ${user.home}/.m2/repository <localRepository>/path/to/local/repo</localRepository> -->
 	<localRepository>${user.home}/.m2/repository</localRepository>
 	<!-- interactiveMode | This will determine whether maven prompts you when
 		it needs input. If set to false, | maven will use a sensible default value,
 		perhaps based on some other setting, for | the parameter in question. | |
 		Default: true <interactiveMode>true</interactiveMode> -->

 	<!-- offline | Determines whether maven should attempt to connect to the
 		network when executing a build. | This will have an effect on artifact downloads,
 		artifact deployment, and others. | | Default: false <offline>false</offline> -->

 	<!-- pluginGroups | This is a list of additional group identifiers that
 		will be searched when resolving plugins by their prefix, i.e. | when invoking
 		a command line like "mvn prefix:goal". Maven will automatically add the group
 		identifiers | "org.apache.maven.plugins" and "org.codehaus.mojo" if these
 		are not already contained in the list. | -->
 	<pluginGroups>
 		<!-- pluginGroup | Specifies a further group identifier to use for plugin
 			lookup. <pluginGroup>com.your.plugins</pluginGroup> -->
 	</pluginGroups>

 	<!-- proxies | This is a list of proxies which can be used on this machine
 		to connect to the network. | Unless otherwise specified (by system property
 		or command-line switch), the first proxy | specification in this list marked
 		as active will be used. | -->
 	<proxies>
 	</proxies>

 	<!-- servers | This is a list of authentication profiles, keyed by the server-id
 		used within the system. | Authentication profiles can be used whenever maven
 		must make a connection to a remote server. | -->
 	<servers>
 		<!-- server | Specifies the authentication information to use when connecting
 			to a particular server, identified by | a unique name within the system (referred
 			to by the 'id' attribute below). | | NOTE: You should either specify username/password
 			OR privateKey/passphrase, since these pairings are | used together. | <server>
 			<id>deploymentRepo</id> <username>repouser</username> <password>repopwd</password>
 			</server> -->

 		<!-- Another sample, using keys to authenticate. <server> <id>siteServer</id>
 			<privateKey>/path/to/private/key</privateKey> <passphrase>optional; leave
 			empty if not used.</passphrase> </server> -->
 	</servers>

 	<!-- mirrors | This is a list of mirrors to be used in downloading artifacts
 		from remote repositories. | | It works like this: a POM may declare a repository
 		to use in resolving certain artifacts. | However, this repository may have
 		problems with heavy traffic at times, so people have mirrored | it to several
 		places. | | That repository definition will have a unique id, so we can create
 		a mirror reference for that | repository, to be used as an alternate download
 		site. The mirror site will be the preferred | server for that repository.
 		| -->
 	<mirrors>
 		<!-- mirror | Specifies a repository mirror site to use instead of a given
 			repository. The repository that | this mirror serves has an ID that matches
 			the mirrorOf element of this mirror. IDs are used | for inheritance and direct
 			lookup purposes, and must be unique across the set of mirrors. | -->
 	</mirrors>

 	<!-- profiles | This is a list of profiles which can be activated in a variety
 		of ways, and which can modify | the build process. Profiles provided in the
 		settings.xml are intended to provide local machine- | specific paths and
 		repository locations which allow the build to work in the local environment.
 		| | For example, if you have an integration testing plugin - like cactus
 		- that needs to know where | your Tomcat instance is installed, you can provide
 		a variable here such that the variable is | dereferenced during the build
 		process to configure the cactus plugin. | | As noted above, profiles can
 		be activated in a variety of ways. One way - the activeProfiles | section
 		of this document (settings.xml) - will be discussed later. Another way essentially
 		| relies on the detection of a system property, either matching a particular
 		value for the property, | or merely testing its existence. Profiles can also
 		be activated by JDK version prefix, where a | value of '1.4' might activate
 		a profile when the build is executed on a JDK version of '1.4.2_07'. | Finally,
 		the list of active profiles can be specified directly from the command line.
 		| | NOTE: For profiles defined in the settings.xml, you are restricted to
 		specifying only artifact | repositories, plugin repositories, and free-form
 		properties to be used as configuration | variables for plugins in the POM.
 		| | -->
 	<profiles>
 		<!-- profile | Specifies a set of introductions to the build process, to
 			be activated using one or more of the | mechanisms described above. For inheritance
 			purposes, and to activate profiles via <activatedProfiles/> | or the command
 			line, profiles have to have an ID that is unique. | | An encouraged best
 			practice for profile identification is to use a consistent naming convention
 			| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey',
 			'user-brett', etc. | This will make it more intuitive to understand what
 			the set of introduced profiles is attempting | to accomplish, particularly
 			when you only have a list of profile id's for debug. | | This profile example
 			uses the JDK version to trigger activation, and provides a JDK-specific repo.
 			<profile> <id>jdk-1.4</id> <activation> <jdk>1.4</jdk> </activation> <repositories>
 			<repository> <id>jdk14</id> <name>Repository for JDK 1.4 builds</name> <url>http://www.myhost.com/maven/jdk14</url>
 			<layout>default</layout> <snapshotPolicy>always</snapshotPolicy> </repository>
 			</repositories> </profile> -->

 		<!-- | Here is another profile, activated by the system property 'target-env'
 			with a value of 'dev', | which provides a specific path to the Tomcat instance.
 			To use this, your plugin configuration | might hypothetically look like:
 			| | ... | <plugin> | <groupId>org.myco.myplugins</groupId> | <artifactId>myplugin</artifactId>
 			| | <configuration> | <tomcatLocation>${tomcatPath}</tomcatLocation> | </configuration>
 			| </plugin> | ... | | NOTE: If you just wanted to inject this configuration
 			whenever someone set 'target-env' to | anything, you could just leave off
 			the <value/> inside the activation-property. | <profile> <id>env-dev</id>
 			<activation> <property> <name>target-env</name> <value>dev</value> </property>
 			</activation> <properties> <tomcatPath>/path/to/tomcat/instance</tomcatPath>
 			</properties> </profile> -->
 	</profiles>

 	<!-- activeProfiles | List of profiles that are active for all builds. |
 		<activeProfiles> <activeProfile>alwaysActiveProfile</activeProfile> <activeProfile>anotherAlwaysActiveProfile</activeProfile>
 		</activeProfiles> -->
 </settings>
	<?xml version="1.0" encoding="UTF-8"?>
	<!--
	============LICENSE_START=======================================================
	ECOMP Policy Engine - Drools PDP
	================================================================================
	Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
	================================================================================
	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	============LICENSE_END=========================================================
	-->


	<!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor
	license agreements. See the NOTICE file distributed with this work for additional
	information regarding copyright ownership. The ASF licenses this file to
	you under the Apache License, Version 2.0 (the "License"); you may not use
	this file except in compliance with the License. You may obtain a copy of
	the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required
	by applicable law or agreed to in writing, software distributed under the
	License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
	OF ANY KIND, either express or implied. See the License for the specific
	language governing permissions and limitations under the License. -->



	<!-- \| This is the configuration file for Maven. It can be specified at two
	levels: \| \| 1. User Level. This settings.xml file provides configuration
	for a single user, \| and is normally provided in ${user.home}/.m2/settings.xml.
	\| \| NOTE: This location can be overridden with the CLI option: \| \| -s /path/to/user/settings.xml
	\| \| 2. Global Level. This settings.xml file provides configuration for all
	Maven \| users on a machine (assuming they're all using the same Maven \| installation).
	It's normally provided in \| ${maven.home}/conf/settings.xml. \| \| NOTE: This
	location can be overridden with the CLI option: \| \| -gs /path/to/global/settings.xml
	\| \| The sections in this sample file are intended to give you a running start
	at \| getting the most out of your Maven installation. Where appropriate,
	the default \| values (values used when the setting is not specified) are
	provided. \| \| -->
	<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
	<!-- localRepository \| The path to the local repository maven will use to
	store artifacts. \| \| Default: ${user.home}/.m2/repository <localRepository>/path/to/local/repo</localRepository> -->
	<localRepository>${user.home}/.m2/repository</localRepository>
	<!-- interactiveMode \| This will determine whether maven prompts you when
	it needs input. If set to false, \| maven will use a sensible default value,
	perhaps based on some other setting, for \| the parameter in question. \| \|
	Default: true <interactiveMode>true</interactiveMode> -->

	<!-- offline \| Determines whether maven should attempt to connect to the
	network when executing a build. \| This will have an effect on artifact downloads,
	artifact deployment, and others. \| \| Default: false <offline>false</offline> -->

	<!-- pluginGroups \| This is a list of additional group identifiers that
	will be searched when resolving plugins by their prefix, i.e. \| when invoking
	a command line like "mvn prefix:goal". Maven will automatically add the group
	identifiers \| "org.apache.maven.plugins" and "org.codehaus.mojo" if these
	are not already contained in the list. \| -->
	<pluginGroups>
	<!-- pluginGroup \| Specifies a further group identifier to use for plugin
	lookup. <pluginGroup>com.your.plugins</pluginGroup> -->
	</pluginGroups>

	<!-- proxies \| This is a list of proxies which can be used on this machine
	to connect to the network. \| Unless otherwise specified (by system property
	or command-line switch), the first proxy \| specification in this list marked
	as active will be used. \| -->
	<proxies>
	</proxies>

	<!-- servers \| This is a list of authentication profiles, keyed by the server-id
	used within the system. \| Authentication profiles can be used whenever maven
	must make a connection to a remote server. \| -->
	<servers>
	<!-- server \| Specifies the authentication information to use when connecting
	to a particular server, identified by \| a unique name within the system (referred
	to by the 'id' attribute below). \| \| NOTE: You should either specify username/password
	OR privateKey/passphrase, since these pairings are \| used together. \| <server>
	<id>deploymentRepo</id> <username>repouser</username> <password>repopwd</password>
	</server> -->

	<!-- Another sample, using keys to authenticate. <server> <id>siteServer</id>
	<privateKey>/path/to/private/key</privateKey> <passphrase>optional; leave
	empty if not used.</passphrase> </server> -->
	</servers>

	<!-- mirrors \| This is a list of mirrors to be used in downloading artifacts
	from remote repositories. \| \| It works like this: a POM may declare a repository
	to use in resolving certain artifacts. \| However, this repository may have
	problems with heavy traffic at times, so people have mirrored \| it to several
	places. \| \| That repository definition will have a unique id, so we can create
	a mirror reference for that \| repository, to be used as an alternate download
	site. The mirror site will be the preferred \| server for that repository.
	\| -->
	<mirrors>
	<!-- mirror \| Specifies a repository mirror site to use instead of a given
	repository. The repository that \| this mirror serves has an ID that matches
	the mirrorOf element of this mirror. IDs are used \| for inheritance and direct
	lookup purposes, and must be unique across the set of mirrors. \| -->
	</mirrors>

	<!-- profiles \| This is a list of profiles which can be activated in a variety
	of ways, and which can modify \| the build process. Profiles provided in the
	settings.xml are intended to provide local machine- \| specific paths and
	repository locations which allow the build to work in the local environment.
	\| \| For example, if you have an integration testing plugin - like cactus
	- that needs to know where \| your Tomcat instance is installed, you can provide
	a variable here such that the variable is \| dereferenced during the build
	process to configure the cactus plugin. \| \| As noted above, profiles can
	be activated in a variety of ways. One way - the activeProfiles \| section
	of this document (settings.xml) - will be discussed later. Another way essentially
	\| relies on the detection of a system property, either matching a particular
	value for the property, \| or merely testing its existence. Profiles can also
	be activated by JDK version prefix, where a \| value of '1.4' might activate
	a profile when the build is executed on a JDK version of '1.4.2_07'. \| Finally,
	the list of active profiles can be specified directly from the command line.
	\| \| NOTE: For profiles defined in the settings.xml, you are restricted to
	specifying only artifact \| repositories, plugin repositories, and free-form
	properties to be used as configuration \| variables for plugins in the POM.
	\| \| -->
	<profiles>
	<!-- profile \| Specifies a set of introductions to the build process, to
	be activated using one or more of the \| mechanisms described above. For inheritance
	purposes, and to activate profiles via <activatedProfiles/> \| or the command
	line, profiles have to have an ID that is unique. \| \| An encouraged best
	practice for profile identification is to use a consistent naming convention
	\| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey',
	'user-brett', etc. \| This will make it more intuitive to understand what
	the set of introduced profiles is attempting \| to accomplish, particularly
	when you only have a list of profile id's for debug. \| \| This profile example
	uses the JDK version to trigger activation, and provides a JDK-specific repo.
	<profile> <id>jdk-1.4</id> <activation> <jdk>1.4</jdk> </activation> <repositories>
	<repository> <id>jdk14</id> <name>Repository for JDK 1.4 builds</name> <url>http://www.myhost.com/maven/jdk14</url>
	<layout>default</layout> <snapshotPolicy>always</snapshotPolicy> </repository>
	</repositories> </profile> -->

	<!-- \| Here is another profile, activated by the system property 'target-env'
	with a value of 'dev', \| which provides a specific path to the Tomcat instance.
	To use this, your plugin configuration \| might hypothetically look like:
	\| \| ... \| <plugin> \| <groupId>org.myco.myplugins</groupId> \| <artifactId>myplugin</artifactId>
	\| \| <configuration> \| <tomcatLocation>${tomcatPath}</tomcatLocation> \| </configuration>
	\| </plugin> \| ... \| \| NOTE: If you just wanted to inject this configuration
	whenever someone set 'target-env' to \| anything, you could just leave off
	the <value/> inside the activation-property. \| <profile> <id>env-dev</id>
	<activation> <property> <name>target-env</name> <value>dev</value> </property>
	</activation> <properties> <tomcatPath>/path/to/tomcat/instance</tomcatPath>
	</properties> </profile> -->
	</profiles>

	<!-- activeProfiles \| List of profiles that are active for all builds. \|
	<activeProfiles> <activeProfile>alwaysActiveProfile</activeProfile> <activeProfile>anotherAlwaysActiveProfile</activeProfile>
	</activeProfiles> -->
	</settings>