ECOMP-PAP-REST/xacml.pap.properties - onap/policy/engine - Gitiles

 ###
 # ============LICENSE_START=======================================================
 # ECOMP-PAP-REST
 # ================================================================================
 # Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
 ###
 #=====================================================================================#
 #================The Below Properties are default, shouldn't change them==============#
 #=====================================================================================#
 #
 # This is our factory that will create our engine
 #
 xacml.PAP.papEngineFactory=org.openecomp.policy.xacml.std.pap.StdEngineFactory
 # Dictionary and Policy Implementation Classes Properties
 dictionary.impl.className=org.openecomp.policy.pap.xacml.rest.handler.DictionaryHandlerImpl
 savePolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.SavePolicyHandler
 pushPolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.PushPolicyHandler
 deletePolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.DeleteHandler
 #AutoPush Policy
 xacml.rest.pap.autopush.file=autopush.properties
 #=====================================================================================#
 #===============The Below Properties will be changed based on Environment=============#
 #=====================================================================================#
 #
 # Where we store our PAP PDP Group/Node information
 #
 xacml.pap.pdps=pdps
 #
 # Need the PAP's url (how PDPs will reach it) configured here
 # because we need it to generate the URLs of the Policy Files
 # sent to the PDPs in the configuration when the PAP is first brought up.
 # (In other cases, such as the PDP calling the PAP, we could generate this URL,
 # but for startup there is no other way to get it.)
 #
 #
 xacml.rest.pap.url=http://localhost:8070/pap/

 #
 # Upon startup, have the PAP servlet send latest configuration information to all
 # the PDP nodes it knows about.
 #
 xacml.rest.pap.initiate.pdp=true
 #
 # Heartbeat from PAP to PDPs
 #
 # How much time (in milliseconds) between heartbeats
 # (i.e. the time between completing the heartbeat with all PDPs and starting the next cycle)
 #
 xacml.rest.pap.heartbeat.interval=100000
 #
 # Heartbeat connection timeout (in milliseconds)
 #
 xacml.rest.pap.heartbeat.timeout=100000

 # new Property Please mention your PAP-REST webapps Location here.
 xacml.rest.config.webapps=/home/users/PolicyEngine/webapps/ConfigPAP/

 #Turn the audit on to synchronize the DB/file system
 #xacml.rest.pap.run.audit.flag=true
 #Turn the audit off to not synchronize the DB/file system
 #xacml.rest.pap.run.audit.flag=false
 xacml.rest.pap.run.audit.flag=true

 #Audit will synchronize the file system to match the contents of the DB
 #xacml.rest.pap.filesystem.audit=true
 #Audit will synchronize the DB to match the contents of the file system
 #xacml.rest.pap.filesystem.audit=false
 xacml.rest.pap.filesystem.audit=false
 xacm.xcor.required.pattern=1,1
 # id
 xacml.rest.pap.userid=testpap
 # pass
 xacml.rest.pap.password=alpha123
 # pdps file
 xacml.rest.pdp.idfile=test.properties

 #Properties for db access
 #properties for MySql xacml database:  PLEASE DO NOT REMOVE... NEEDED FOR APIs
 javax.persistence.jdbc.driver=com.mysql.jdbc.Driver
 javax.persistence.jdbc.url=jdbc:mysql://localhost:3306/ecomp_sdk?failOverReadOnly=false&autoReconnect=true
 javax.persistence.jdbc.user=policy_user
 javax.persistence.jdbc.password=policy_user

 #Time in ms which a Policy DB transaction will wait to get the transaction lock object
 xacml.rest.pap.transaction.waitms=500000

 #Policy DB transaction timeout in ms after it has obtained the transaction lock object
 xacml.rest.pap.transaction.timeoutms=500000

 #Policy Audit timeout in ms after it has obtained the transaction lock object
 xacml.rest.pap.audit.timeoutms=500000

 #controls how long the pap will wait before giving up when sending notifications to other paps
 xacml.rest.pap.notify.timeoutms=10000

 #the number of times an incoming policy update notification will be tried to be processed (or until it succeeds)
 xacml.rest.pap.incomingnotification.tries=4

 #AutoPush Policy Flag
 xacml.rest.pap.autopush.flag=false

 #***Properties for IntegrityMonitor integration defined in XACMLRestProperties.java***

 #The name of the PAP.  Must be unique across the system
 xacml.rest.pap.resource.name=site_1.pap_1

 #***Properties for IntegrityMonitor integration defined in IntegrityMonitorProperties.java***

 #Interval between forward progress counter updates in seconds
 fp_monitor_interval=30

 #Number of forward progress counter failures before failover
 failed_counter_threshold=3

 #Interval in seconds between test transactions if there is no other traffic
 test_trans_interval=10

 #Interval in seconds between updates of the forward progress counter in the DB
 write_fpc_interval=5

 #Name of the site
 site_name=site_1

 #Node type. Can take values of: pdp-xacml, pdp-drools, pap, pap-admin, logparser, brms-gateway,
 #astra-gateway, elk-server
 node_type=pap

 #Dependency groups are groups of resources upon which a node operational state is dependent upon (dependency_groups).
 #Each group is a comma-separated list of resource names and groups are separated by a semicolon. A group may contain
 #one or more members.
 dependency_groups=site_1.logparser_1;site_1.adminconsole_1;site_1.elk_1

 # The (optional) period of time in seconds between executions of the integrity audit.
 # Value < 0 : Audit does not run (default value if property is not present = -1)
 # Value = 0 : Audit runs continuously
 # Value > 0 : The period of time in seconds between execution of the audit on a particular node
 integrity_audit_period_seconds=-1

 ENVIRONMENT=DEVL

 #
 #PolicySafetyChecker properties
 #
 #Turn safetyChecker on/off
 xacml.rest.pap.safetychecker=on
 PDP_URL1 = http://localhost:8082/pdp/, testpdp, alpha456
 CLIENT_ID=
 CLIENT_KEY=

 #Micro Service Model Properties
 xacml.policy.msEcompName=http://org.openecomp
 xacml.policy.msPolicyName=http://org.openecomp/policy
	###
	# ============LICENSE_START=======================================================
	# ECOMP-PAP-REST
	# ================================================================================
	# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=========================================================
	###
	#=====================================================================================#
	#================The Below Properties are default, shouldn't change them==============#
	#=====================================================================================#
	#
	# This is our factory that will create our engine
	#
	xacml.PAP.papEngineFactory=org.openecomp.policy.xacml.std.pap.StdEngineFactory
	# Dictionary and Policy Implementation Classes Properties
	dictionary.impl.className=org.openecomp.policy.pap.xacml.rest.handler.DictionaryHandlerImpl
	savePolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.SavePolicyHandler
	pushPolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.PushPolicyHandler
	deletePolicy.impl.className=org.openecomp.policy.pap.xacml.rest.handler.DeleteHandler
	#AutoPush Policy
	xacml.rest.pap.autopush.file=autopush.properties
	#=====================================================================================#
	#===============The Below Properties will be changed based on Environment=============#
	#=====================================================================================#
	#
	# Where we store our PAP PDP Group/Node information
	#
	xacml.pap.pdps=pdps
	#
	# Need the PAP's url (how PDPs will reach it) configured here
	# because we need it to generate the URLs of the Policy Files
	# sent to the PDPs in the configuration when the PAP is first brought up.
	# (In other cases, such as the PDP calling the PAP, we could generate this URL,
	# but for startup there is no other way to get it.)
	#
	#
	xacml.rest.pap.url=http://localhost:8070/pap/

	#
	# Upon startup, have the PAP servlet send latest configuration information to all
	# the PDP nodes it knows about.
	#
	xacml.rest.pap.initiate.pdp=true
	#
	# Heartbeat from PAP to PDPs
	#
	# How much time (in milliseconds) between heartbeats
	# (i.e. the time between completing the heartbeat with all PDPs and starting the next cycle)
	#
	xacml.rest.pap.heartbeat.interval=100000
	#
	# Heartbeat connection timeout (in milliseconds)
	#
	xacml.rest.pap.heartbeat.timeout=100000

	# new Property Please mention your PAP-REST webapps Location here.
	xacml.rest.config.webapps=/home/users/PolicyEngine/webapps/ConfigPAP/

	#Turn the audit on to synchronize the DB/file system
	#xacml.rest.pap.run.audit.flag=true
	#Turn the audit off to not synchronize the DB/file system
	#xacml.rest.pap.run.audit.flag=false
	xacml.rest.pap.run.audit.flag=true

	#Audit will synchronize the file system to match the contents of the DB
	#xacml.rest.pap.filesystem.audit=true
	#Audit will synchronize the DB to match the contents of the file system
	#xacml.rest.pap.filesystem.audit=false
	xacml.rest.pap.filesystem.audit=false
	xacm.xcor.required.pattern=1,1
	# id
	xacml.rest.pap.userid=testpap
	# pass
	xacml.rest.pap.password=alpha123
	# pdps file
	xacml.rest.pdp.idfile=test.properties

	#Properties for db access
	#properties for MySql xacml database: PLEASE DO NOT REMOVE... NEEDED FOR APIs
	javax.persistence.jdbc.driver=com.mysql.jdbc.Driver
	javax.persistence.jdbc.url=jdbc:mysql://localhost:3306/ecomp_sdk?failOverReadOnly=false&autoReconnect=true
	javax.persistence.jdbc.user=policy_user
	javax.persistence.jdbc.password=policy_user

	#Time in ms which a Policy DB transaction will wait to get the transaction lock object
	xacml.rest.pap.transaction.waitms=500000

	#Policy DB transaction timeout in ms after it has obtained the transaction lock object
	xacml.rest.pap.transaction.timeoutms=500000

	#Policy Audit timeout in ms after it has obtained the transaction lock object
	xacml.rest.pap.audit.timeoutms=500000

	#controls how long the pap will wait before giving up when sending notifications to other paps
	xacml.rest.pap.notify.timeoutms=10000

	#the number of times an incoming policy update notification will be tried to be processed (or until it succeeds)
	xacml.rest.pap.incomingnotification.tries=4

	#AutoPush Policy Flag
	xacml.rest.pap.autopush.flag=false

	#*Properties for IntegrityMonitor integration defined in XACMLRestProperties.java*

	#The name of the PAP. Must be unique across the system
	xacml.rest.pap.resource.name=site_1.pap_1

	#*Properties for IntegrityMonitor integration defined in IntegrityMonitorProperties.java*

	#Interval between forward progress counter updates in seconds
	fp_monitor_interval=30

	#Number of forward progress counter failures before failover
	failed_counter_threshold=3

	#Interval in seconds between test transactions if there is no other traffic
	test_trans_interval=10

	#Interval in seconds between updates of the forward progress counter in the DB
	write_fpc_interval=5

	#Name of the site
	site_name=site_1

	#Node type. Can take values of: pdp-xacml, pdp-drools, pap, pap-admin, logparser, brms-gateway,
	#astra-gateway, elk-server
	node_type=pap

	#Dependency groups are groups of resources upon which a node operational state is dependent upon (dependency_groups).
	#Each group is a comma-separated list of resource names and groups are separated by a semicolon. A group may contain
	#one or more members.
	dependency_groups=site_1.logparser_1;site_1.adminconsole_1;site_1.elk_1

	# The (optional) period of time in seconds between executions of the integrity audit.
	# Value < 0 : Audit does not run (default value if property is not present = -1)
	# Value = 0 : Audit runs continuously
	# Value > 0 : The period of time in seconds between execution of the audit on a particular node
	integrity_audit_period_seconds=-1

	ENVIRONMENT=DEVL

	#
	#PolicySafetyChecker properties
	#
	#Turn safetyChecker on/off
	xacml.rest.pap.safetychecker=on
	PDP_URL1 = http://localhost:8082/pdp/, testpdp, alpha456
	CLIENT_ID=
	CLIENT_KEY=

	#Micro Service Model Properties
	xacml.policy.msEcompName=http://org.openecomp
	xacml.policy.msPolicyName=http://org.openecomp/policy