ONAP-PDP-REST/src/test/resources/xacml.pdp.ueb.properties - onap/policy/engine - Gitiles

 ###
 # ============LICENSE_START=======================================================
 # ONAP-PDP-REST
 # ================================================================================
 # Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
 ###

 # Default XACML Properties File for PDP RESTful servlet
 #
 # Standard API Factories
 #
 xacml.dataTypeFactory=com.att.research.xacml.std.StdDataTypeFactory
 xacml.pdpEngineFactory=com.att.research.xacmlatt.pdp.ATTPDPEngineFactory
 xacml.pepEngineFactory=com.att.research.xacml.std.pep.StdEngineFactory
 # NOT USED SEE BELOW xacml.pipFinderFactory=org.onap.policy.xacml.std.pip.StdPIPFinderFactory
 xacml.traceEngineFactory=com.att.research.xacml.std.trace.LoggingTraceEngineFactory
 #
 # AT&T PDP Implementation Factories
 #
 xacml.att.evaluationContextFactory=com.att.research.xacmlatt.pdp.std.StdEvaluationContextFactory
 xacml.att.combiningAlgorithmFactory=com.att.research.xacmlatt.pdp.std.StdCombiningAlgorithmFactory
 xacml.att.functionDefinitionFactory=org.onap.policy.xacml.custom.OnapFunctionDefinitionFactory
 # NOT USED SEE BELOW xacml.att.policyFinderFactory=org.onap.policy.pdp.std.StdPolicyFinderFactory
 # creteUpdate Policy Implementation Class details.
 createUpdatePolicy.impl.className=org.onap.policy.pdp.rest.api.services.CreateUpdatePolicyServiceImpl
 # AAF Implementation class details
 aafClient.impl.className=org.onap.policy.utils.AAFPolicyClientImpl
 #
 # AT&T RESTful PDP Implementation Factories
 #
 xacml.pipFinderFactory=org.onap.policy.pdp.rest.impl.XACMLPdpPIPFinderFactory
 xacml.att.policyFinderFactory=org.onap.policy.pdp.rest.XACMLPdpPolicyFinderFactory
 #
 # When set to true, this flag tells the StdPolicyFinderFactory to combined all the root policy files into
 # into one PolicySet and use the given Policy Algorithm.
 #
 xacml.att.policyFinderFactory.combineRootPolicies=urn:com:att:xacml:3.0:policy-combining-algorithm:combined-permit-overrides
 #
 # PDP RESTful API properties
 #
 # Set this to the address where the XACML-PAP-REST servlet is running
 xacml.rest.pap.url=http://localhost:8070/pap/

 #if multiple paps exist, the xacml.rest.pap.url can be removed and they can be defined like this:
 #xacml.rest.pap.urls=http://localhost:9090/pap/,http://localhost:9091/pap/

 #
 # Give the running PDP an ID for the PAP. The url that its running as is a good choice.
 # The PAP identifies PDP's using the URL of the PDP.
 #
 xacml.rest.pdp.id=http://localhost:8082/pdp/

 # Give the port number used for the PDP

 xacml.jmx.port=0


 # Notification Properties
 # Notifcation type: websocket, ueb or dmaap... if left blank websocket is the default
 NOTIFICATION_TYPE=ueb
 NOTIFICATION_SERVERS=
 NOTIFICATION_TOPIC=
 NOTIFICATION_DELAY=
 UEB_API_KEY=
 UEB_API_SECRET=
 DMAAP_AAF_LOGIN=
 DMAAP_AAF_PASSWORD=

 #
 # Set the directory where the PDP holds its Policy Cache and PIP Configuration
 #
 xacml.rest.pdp.config=config

 xacml.rest.pdp.webapps=/home/users/PolicyEngine/webapps/ConfigPAP/
 #
 # Initialize register with PAP servlet
 #
 xacml.rest.pdp.register=true
 #
 # Sleep period in seconds between register attempts
 #
 xacml.rest.pdp.register.sleep=15
 #
 # number of attempts to register. -1 means keep trying forever.
 #
 xacml.rest.pdp.register.retries=-1
 #
 # max number of bytes in a POST of a XML/JSON request
 # old value #32767
 xacml.rest.pdp.maxcontent=99999999
 #
 # Set UserID here
 xacml.rest.pdp.userid=testpdp
 # Set Password here
 xacml.rest.pdp.password=alpha456

 # id PAP
 xacml.rest.pap.userid=testpap
 #if multiple paps have different logins, they can be defined like this:
 #http\://localhost\:9090/pap/.xacml.rest.pap.userid=testpap

 # pass PAP
 xacml.rest.pap.password=alpha123
 #http\://localhost\:9090/pap/.xacml.rest.pap.password=alpha123

 # Delay for Notifications Don't change this. Value in milliSec.
 xacml.rest.notification.delay=30

 # Client interval to ping notification service.
 CLIENT_INTERVAL=15000

 # Buffer Size.
 REQUEST_BUFFER_SIZE=15

 #Properties for db access
 #properties for MySql xacml database:  PLEASE DO NOT REMOVE... NEEDED FOR APIs
 javax.persistence.jdbc.driver=org.h2.Driver
 javax.persistence.jdbc.url=jdbc:h2:file:./sql/xacmlTest
 javax.persistence.jdbc.user=sa
 javax.persistence.jdbc.password=

 #***Properties for IntegrityMonitor integration defined in XACMLRestProperties.java***

 #The name of the PDP.  Must be unique across the system
 xacml.rest.pdp.resource.name=site_1.pdp_1

 #***Properties for IntegrityMonitor integration defined in IntegrityMonitorProperties.java***

 #Interval between forward progress counter updates in seconds
 fp_monitor_interval=30

 #Number of forward progress counter failures before failover
 failed_counter_threshold=3

 #Interval in seconds between test transactions if there is no other traffic
 test_trans_interval=10

 #Interval in seconds between updates of the forward progress counter in the DB
 write_fpc_interval=5

 #Name of the site
 site_name=site_1

 #Node type
 node_type=pdp_xacml

 #Dependency groups are groups of resources upon which a node operational state is dependent upon).
 #Each group is a comma-separated list of resource names and groups are separated by a semicolon.
 #A group may contain one or more members. Resource names must match the resource names defined
 #in the respective servers' properties files
 dependency_groups=site_1.pdplp_1;site_1.astragw_1;site_1.brmsgw_1

 # this can be DEVL, TEST, PROD
 ENVIRONMENT=DEVL
 xacml.rest.pep.idfile = client.properties

 #AAF Policy Name space
 #Not Mandatory for Open Onap
 policy.aaf.namespace =
 policy.aaf.resource =
 # Decision Response settings.
 # can be either PERMIT or DENY.
 decision.indeterminate.response=PERMIT
	###
	# ============LICENSE_START=======================================================
	# ONAP-PDP-REST
	# ================================================================================
	# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=========================================================
	###

	# Default XACML Properties File for PDP RESTful servlet
	#
	# Standard API Factories
	#
	xacml.dataTypeFactory=com.att.research.xacml.std.StdDataTypeFactory
	xacml.pdpEngineFactory=com.att.research.xacmlatt.pdp.ATTPDPEngineFactory
	xacml.pepEngineFactory=com.att.research.xacml.std.pep.StdEngineFactory
	# NOT USED SEE BELOW xacml.pipFinderFactory=org.onap.policy.xacml.std.pip.StdPIPFinderFactory
	xacml.traceEngineFactory=com.att.research.xacml.std.trace.LoggingTraceEngineFactory
	#
	# AT&T PDP Implementation Factories
	#
	xacml.att.evaluationContextFactory=com.att.research.xacmlatt.pdp.std.StdEvaluationContextFactory
	xacml.att.combiningAlgorithmFactory=com.att.research.xacmlatt.pdp.std.StdCombiningAlgorithmFactory
	xacml.att.functionDefinitionFactory=org.onap.policy.xacml.custom.OnapFunctionDefinitionFactory
	# NOT USED SEE BELOW xacml.att.policyFinderFactory=org.onap.policy.pdp.std.StdPolicyFinderFactory
	# creteUpdate Policy Implementation Class details.
	createUpdatePolicy.impl.className=org.onap.policy.pdp.rest.api.services.CreateUpdatePolicyServiceImpl
	# AAF Implementation class details
	aafClient.impl.className=org.onap.policy.utils.AAFPolicyClientImpl
	#
	# AT&T RESTful PDP Implementation Factories
	#
	xacml.pipFinderFactory=org.onap.policy.pdp.rest.impl.XACMLPdpPIPFinderFactory
	xacml.att.policyFinderFactory=org.onap.policy.pdp.rest.XACMLPdpPolicyFinderFactory
	#
	# When set to true, this flag tells the StdPolicyFinderFactory to combined all the root policy files into
	# into one PolicySet and use the given Policy Algorithm.
	#
	xacml.att.policyFinderFactory.combineRootPolicies=urn:com:att:xacml:3.0:policy-combining-algorithm:combined-permit-overrides
	#
	# PDP RESTful API properties
	#
	# Set this to the address where the XACML-PAP-REST servlet is running
	xacml.rest.pap.url=http://localhost:8070/pap/

	#if multiple paps exist, the xacml.rest.pap.url can be removed and they can be defined like this:
	#xacml.rest.pap.urls=http://localhost:9090/pap/,http://localhost:9091/pap/

	#
	# Give the running PDP an ID for the PAP. The url that its running as is a good choice.
	# The PAP identifies PDP's using the URL of the PDP.
	#
	xacml.rest.pdp.id=http://localhost:8082/pdp/

	# Give the port number used for the PDP

	xacml.jmx.port=0


	# Notification Properties
	# Notifcation type: websocket, ueb or dmaap... if left blank websocket is the default
	NOTIFICATION_TYPE=ueb
	NOTIFICATION_SERVERS=
	NOTIFICATION_TOPIC=
	NOTIFICATION_DELAY=
	UEB_API_KEY=
	UEB_API_SECRET=
	DMAAP_AAF_LOGIN=
	DMAAP_AAF_PASSWORD=

	#
	# Set the directory where the PDP holds its Policy Cache and PIP Configuration
	#
	xacml.rest.pdp.config=config

	xacml.rest.pdp.webapps=/home/users/PolicyEngine/webapps/ConfigPAP/
	#
	# Initialize register with PAP servlet
	#
	xacml.rest.pdp.register=true
	#
	# Sleep period in seconds between register attempts
	#
	xacml.rest.pdp.register.sleep=15
	#
	# number of attempts to register. -1 means keep trying forever.
	#
	xacml.rest.pdp.register.retries=-1
	#
	# max number of bytes in a POST of a XML/JSON request
	# old value #32767
	xacml.rest.pdp.maxcontent=99999999
	#
	# Set UserID here
	xacml.rest.pdp.userid=testpdp
	# Set Password here
	xacml.rest.pdp.password=alpha456

	# id PAP
	xacml.rest.pap.userid=testpap
	#if multiple paps have different logins, they can be defined like this:
	#http\://localhost\:9090/pap/.xacml.rest.pap.userid=testpap

	# pass PAP
	xacml.rest.pap.password=alpha123
	#http\://localhost\:9090/pap/.xacml.rest.pap.password=alpha123

	# Delay for Notifications Don't change this. Value in milliSec.
	xacml.rest.notification.delay=30

	# Client interval to ping notification service.
	CLIENT_INTERVAL=15000

	# Buffer Size.
	REQUEST_BUFFER_SIZE=15

	#Properties for db access
	#properties for MySql xacml database: PLEASE DO NOT REMOVE... NEEDED FOR APIs
	javax.persistence.jdbc.driver=org.h2.Driver
	javax.persistence.jdbc.url=jdbc:h2:file:./sql/xacmlTest
	javax.persistence.jdbc.user=sa
	javax.persistence.jdbc.password=

	#*Properties for IntegrityMonitor integration defined in XACMLRestProperties.java*

	#The name of the PDP. Must be unique across the system
	xacml.rest.pdp.resource.name=site_1.pdp_1

	#*Properties for IntegrityMonitor integration defined in IntegrityMonitorProperties.java*

	#Interval between forward progress counter updates in seconds
	fp_monitor_interval=30

	#Number of forward progress counter failures before failover
	failed_counter_threshold=3

	#Interval in seconds between test transactions if there is no other traffic
	test_trans_interval=10

	#Interval in seconds between updates of the forward progress counter in the DB
	write_fpc_interval=5

	#Name of the site
	site_name=site_1

	#Node type
	node_type=pdp_xacml

	#Dependency groups are groups of resources upon which a node operational state is dependent upon).
	#Each group is a comma-separated list of resource names and groups are separated by a semicolon.
	#A group may contain one or more members. Resource names must match the resource names defined
	#in the respective servers' properties files
	dependency_groups=site_1.pdplp_1;site_1.astragw_1;site_1.brmsgw_1

	# this can be DEVL, TEST, PROD
	ENVIRONMENT=DEVL
	xacml.rest.pep.idfile = client.properties

	#AAF Policy Name space
	#Not Mandatory for Open Onap
	policy.aaf.namespace =
	policy.aaf.resource =
	# Decision Response settings.
	# can be either PERMIT or DENY.
	decision.indeterminate.response=PERMIT