ECOMP-SDK-APP/xacml.admin.properties - onap/policy/engine - Gitiles

 ###
 # ============LICENSE_START=======================================================
 # ECOMP Policy Engine
 # ================================================================================
 # Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
 ###

 #
 # This file is set to the defaults one can use to run the XACML-PAP-ADMIN for testing and development.
 #
 # It is not recommended to modify this file directly, but rather copy it to another location and make any modifications
 # necessary to run the application in a development or a production environment. You can set the Java VM System
 # property to change where the application can find the file. For example:
 #
 #-Dxacml.properties=/opt/app/xacml/etc/xacml.admin.properties
 #
 #
 # Standard API Factories
 #
 xacml.dataTypeFactory=com.att.research.xacml.std.StdDataTypeFactory
 xacml.pdpEngineFactory=com.att.research.xacmlatt.pdp.ATTPDPEngineFactory
 xacml.pepEngineFactory=com.att.research.xacml.std.pep.StdEngineFactory
 xacml.pipFinderFactory=com.att.research.xacml.std.pip.StdPIPFinderFactory
 #
 # AT&T PDP Implementation Factories
 #
 xacml.att.evaluationContextFactory=com.att.research.xacmlatt.pdp.std.StdEvaluationContextFactory
 xacml.att.combiningAlgorithmFactory=com.att.research.xacmlatt.pdp.std.StdCombiningAlgorithmFactory
 xacml.att.functionDefinitionFactory=org.openecomp.policy.xacml.custom.EcompFunctionDefinitionFactory
 xacml.att.policyFinderFactory=com.att.research.xacmlatt.pdp.std.StdPolicyFinderFactory

 #
 # This is an extremely simple policy to demonstrate authorization
 # within the Admin Console.
 #
 xacml.rootPolicies=admin
 #
 # PAP Servlet properties
 #
 xacml.PAP.papEngineFactory=org.openecomp.policy.xacml.std.pap.StdEngineFactory

 #
 # Admin Console properties
 #
 xacml.AC.papEngineFactory=org.openecomp.policy.xacml.admin.util.RESTfulPAPFactory

 # Set your domain here:
 xacml.rest.admin.domain=com
 #
 # Location where the GIT repository is located
 #
 xacml.rest.admin.repository=repository
 #
 # Location where all the user workspaces are located.
 #
 xacml.rest.admin.workspace=workspace
 #
 #
 # Property to declare the max time frame for logs.
 #
 xacml.log.timeframe=30
 #
 #
 #
 xacml.rest.admin.closedLoopJSON =JSONConfig.json
 xacml.rest.admin.microServiceModel=model.properties
 xacm.restful.interface.file=RESTful.interface.properties
 #
 #If the Audit is set false, then Audit function will not work at the Server Run time.
 #This will Syncronize the data between Roles and Userinfo Table
 xacml.audit.userInfo = true
 #
 #The Test Environment User Login LoginIU Should provide below on seperating with Comma
 #
 xacml.testEnvironment.loginId =

 #Log DB properties
 xacml.log.db.driver=org.mariadb.jdbc.Driver
 xacml.log.db.url=jdbc:mariadb://localhost:3306/log?failOverReadOnly=false&autoReconnect=true
 xacml.log.db.user=policy_user
 xacml.log.db.password=policy_user

 xacml.att.log.timeframe=150

 javax.persistence.jdbc.driver=com.mysql.jdbc.Driver
 javax.persistence.jdbc.url=jdbc:mysql://localhost:3306/ecomp_sdk
 javax.persistence.jdbc.user=policy_user
 javax.persistence.jdbc.password=policy_user

 # Dashboard refresh rate in miliseconds
 xacml.refresh.rate=40000
 xacml.user.column.count=3
 xacml.sqlcontainer.page.length=75
 xacm.xcor.required.pattern=1,1
 xacm.cache.live.time=2
 xacml.max.priority.count=10

 #
 # These can be set so the Admin Console knows who is logged on. Ideally, you can run the console in a J2EE
 # container and setup authentication as you please. Setting HttpSession attribute values will override these
 # values set in the properties files.
 #
 # ((HttpServletRequest) request).getSession().setAttribute("xacml.rest.admin.user.name", "Homer");
 #
 # The default policy: Policy-Admin.xml is extremely simple.
 #
 # You can test authorization within the Admin Console by changing the user id.
 # There are 3 supported user ids:
 #	guest - Read only access
 #	editor - Read/Write access
 #	admin - Read/Write/Admin access
 #
 # An empty or null value for xacml.rest.admin.user.id results in no access to the application at all.
 #
 # This is for development/demonstration purposes only. A production environment should provide authentication which is
 # outside the scope of this application. This application can be used to develop a XACML policy for user authorization
 # within this application.
 #
 #xacml.rest.admin.user.name=Guest
 #xacml.rest.admin.user.id=guest
 #xacml.rest.admin.user.name=Editor
 #xacml.rest.admin.user.id=editor
 xacml.rest.admin.user.name=Administrator
 xacml.rest.admin.user.id=super-admin
 xacml.rest.admin.user.email=

 #
 # URL location for the PAP servlet.
 #
 xacml.rest.pap.url=http://localhost:8070/pap/

 # id PAP
 xacml.rest.pap.userid=testpap
 # pass PAP
 xacml.rest.pap.password=alpha123

 # new Property Please mention your PAP-REST webapps Location here.

 xacml.rest.config.webapps=C:\\Second Tomcat\\apache-tomcat-8.0.23\\webapps\\ConfigPAP\\

 # pdps file - Needs to have the location of the PDPs File of the PAP-REST
 xacml.rest.pdp.idfile=test.properties

 #Template Versions
 xacml.rest.closedLoopFault=OpenSource.version.1
 xacml.rest.closedLoopPM=OpenSource.version.1
 xacml.rest.microServices=OpenSource.version.1
 xacml.rest.gocPolicy=OpenSource.version.1
 xacml.rest.firewallPolicy=OpenSource.version.1

 #***Properties for IntegrityMonitor integration defined in XACMLRestProperties.java***

 #The name of the Admin.  Must be unique across the system
 xacml.rest.admin.resource.name=site_1.admin_1

 #The site name for the Admin
 site_name=site_1

 #Has to be one of pdp_xacml, pdp_drools, pap, pap_admin, logparser, brms_gateway, astra_gateway, elk_server
 node_type=pap_admin

 # The (optional) period of time in seconds between executions of the integrity audit.
 # Value < 0 : Audit does not run (default value if property is not present = -1)
 # Value = 0 : Audit runs continuously
 # Value > 0 : The period of time in seconds between execution of the audit on a particular node
 integrity_audit_period_seconds=-1

 #Automatic Policy Distribution
 xacml.att.automatic.push = false


 #Dashboard Tab Limit
 xacml.ecomp.dashboard.logTableLimit = 5000
 xacml.ecomp.dashboard.systemAlertTableLimit = 2000


 #Diff of policies for Firewall feature
 FW_GETURL=https://todo_enter_the_firewallurl
 FW_AUTHOURL=https://todo_enter_the_firewallAuthurl
 FW_PROXY=todo_enter_the_proxy
 FW_PORT=8080

 #SMTP Server Details for Java Mail
 ecomp.smtp.host = smtp_host
 ecomp.smtp.port = smtp_port
 ecomp.smtp.userName = smtp_username
 ecomp.smtp.password = smtp_password
 ecomp.smtp.emailExtension=smtp_emailExtension
 ecomp.application.name = smtp_AppName

 #Dialect for Database
 ecomp.dialect = org.hibernate.dialect.MySQLDialect

 policyAdapter.impl.className = org.openecomp.policy.admin.PolicyAdapter

 #Micro Service Model Properties
 xacml.policy.msEcompName=http://org.openecomp
 xacml.policy.msPolicyName=http://org.openecomp/policy
	###
	# ============LICENSE_START=======================================================
	# ECOMP Policy Engine
	# ================================================================================
	# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
	# ================================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=========================================================
	###

	#
	# This file is set to the defaults one can use to run the XACML-PAP-ADMIN for testing and development.
	#
	# It is not recommended to modify this file directly, but rather copy it to another location and make any modifications
	# necessary to run the application in a development or a production environment. You can set the Java VM System
	# property to change where the application can find the file. For example:
	#
	#-Dxacml.properties=/opt/app/xacml/etc/xacml.admin.properties
	#
	#
	# Standard API Factories
	#
	xacml.dataTypeFactory=com.att.research.xacml.std.StdDataTypeFactory
	xacml.pdpEngineFactory=com.att.research.xacmlatt.pdp.ATTPDPEngineFactory
	xacml.pepEngineFactory=com.att.research.xacml.std.pep.StdEngineFactory
	xacml.pipFinderFactory=com.att.research.xacml.std.pip.StdPIPFinderFactory
	#
	# AT&T PDP Implementation Factories
	#
	xacml.att.evaluationContextFactory=com.att.research.xacmlatt.pdp.std.StdEvaluationContextFactory
	xacml.att.combiningAlgorithmFactory=com.att.research.xacmlatt.pdp.std.StdCombiningAlgorithmFactory
	xacml.att.functionDefinitionFactory=org.openecomp.policy.xacml.custom.EcompFunctionDefinitionFactory
	xacml.att.policyFinderFactory=com.att.research.xacmlatt.pdp.std.StdPolicyFinderFactory

	#
	# This is an extremely simple policy to demonstrate authorization
	# within the Admin Console.
	#
	xacml.rootPolicies=admin
	#
	# PAP Servlet properties
	#
	xacml.PAP.papEngineFactory=org.openecomp.policy.xacml.std.pap.StdEngineFactory

	#
	# Admin Console properties
	#
	xacml.AC.papEngineFactory=org.openecomp.policy.xacml.admin.util.RESTfulPAPFactory

	# Set your domain here:
	xacml.rest.admin.domain=com
	#
	# Location where the GIT repository is located
	#
	xacml.rest.admin.repository=repository
	#
	# Location where all the user workspaces are located.
	#
	xacml.rest.admin.workspace=workspace
	#
	#
	# Property to declare the max time frame for logs.
	#
	xacml.log.timeframe=30
	#
	#
	#
	xacml.rest.admin.closedLoopJSON =JSONConfig.json
	xacml.rest.admin.microServiceModel=model.properties
	xacm.restful.interface.file=RESTful.interface.properties
	#
	#If the Audit is set false, then Audit function will not work at the Server Run time.
	#This will Syncronize the data between Roles and Userinfo Table
	xacml.audit.userInfo = true
	#
	#The Test Environment User Login LoginIU Should provide below on seperating with Comma
	#
	xacml.testEnvironment.loginId =

	#Log DB properties
	xacml.log.db.driver=org.mariadb.jdbc.Driver
	xacml.log.db.url=jdbc:mariadb://localhost:3306/log?failOverReadOnly=false&autoReconnect=true
	xacml.log.db.user=policy_user
	xacml.log.db.password=policy_user

	xacml.att.log.timeframe=150

	javax.persistence.jdbc.driver=com.mysql.jdbc.Driver
	javax.persistence.jdbc.url=jdbc:mysql://localhost:3306/ecomp_sdk
	javax.persistence.jdbc.user=policy_user
	javax.persistence.jdbc.password=policy_user

	# Dashboard refresh rate in miliseconds
	xacml.refresh.rate=40000
	xacml.user.column.count=3
	xacml.sqlcontainer.page.length=75
	xacm.xcor.required.pattern=1,1
	xacm.cache.live.time=2
	xacml.max.priority.count=10

	#
	# These can be set so the Admin Console knows who is logged on. Ideally, you can run the console in a J2EE
	# container and setup authentication as you please. Setting HttpSession attribute values will override these
	# values set in the properties files.
	#
	# ((HttpServletRequest) request).getSession().setAttribute("xacml.rest.admin.user.name", "Homer");
	#
	# The default policy: Policy-Admin.xml is extremely simple.
	#
	# You can test authorization within the Admin Console by changing the user id.
	# There are 3 supported user ids:
	# guest - Read only access
	# editor - Read/Write access
	# admin - Read/Write/Admin access
	#
	# An empty or null value for xacml.rest.admin.user.id results in no access to the application at all.
	#
	# This is for development/demonstration purposes only. A production environment should provide authentication which is
	# outside the scope of this application. This application can be used to develop a XACML policy for user authorization
	# within this application.
	#
	#xacml.rest.admin.user.name=Guest
	#xacml.rest.admin.user.id=guest
	#xacml.rest.admin.user.name=Editor
	#xacml.rest.admin.user.id=editor
	xacml.rest.admin.user.name=Administrator
	xacml.rest.admin.user.id=super-admin
	xacml.rest.admin.user.email=

	#
	# URL location for the PAP servlet.
	#
	xacml.rest.pap.url=http://localhost:8070/pap/

	# id PAP
	xacml.rest.pap.userid=testpap
	# pass PAP
	xacml.rest.pap.password=alpha123

	# new Property Please mention your PAP-REST webapps Location here.

	xacml.rest.config.webapps=C:\\Second Tomcat\\apache-tomcat-8.0.23\\webapps\\ConfigPAP\\

	# pdps file - Needs to have the location of the PDPs File of the PAP-REST
	xacml.rest.pdp.idfile=test.properties

	#Template Versions
	xacml.rest.closedLoopFault=OpenSource.version.1
	xacml.rest.closedLoopPM=OpenSource.version.1
	xacml.rest.microServices=OpenSource.version.1
	xacml.rest.gocPolicy=OpenSource.version.1
	xacml.rest.firewallPolicy=OpenSource.version.1

	#*Properties for IntegrityMonitor integration defined in XACMLRestProperties.java*

	#The name of the Admin. Must be unique across the system
	xacml.rest.admin.resource.name=site_1.admin_1

	#The site name for the Admin
	site_name=site_1

	#Has to be one of pdp_xacml, pdp_drools, pap, pap_admin, logparser, brms_gateway, astra_gateway, elk_server
	node_type=pap_admin

	# The (optional) period of time in seconds between executions of the integrity audit.
	# Value < 0 : Audit does not run (default value if property is not present = -1)
	# Value = 0 : Audit runs continuously
	# Value > 0 : The period of time in seconds between execution of the audit on a particular node
	integrity_audit_period_seconds=-1

	#Automatic Policy Distribution
	xacml.att.automatic.push = false


	#Dashboard Tab Limit
	xacml.ecomp.dashboard.logTableLimit = 5000
	xacml.ecomp.dashboard.systemAlertTableLimit = 2000


	#Diff of policies for Firewall feature
	FW_GETURL=https://todo_enter_the_firewallurl
	FW_AUTHOURL=https://todo_enter_the_firewallAuthurl
	FW_PROXY=todo_enter_the_proxy
	FW_PORT=8080

	#SMTP Server Details for Java Mail
	ecomp.smtp.host = smtp_host
	ecomp.smtp.port = smtp_port
	ecomp.smtp.userName = smtp_username
	ecomp.smtp.password = smtp_password
	ecomp.smtp.emailExtension=smtp_emailExtension
	ecomp.application.name = smtp_AppName

	#Dialect for Database
	ecomp.dialect = org.hibernate.dialect.MySQLDialect

	policyAdapter.impl.className = org.openecomp.policy.admin.PolicyAdapter

	#Micro Service Model Properties
	xacml.policy.msEcompName=http://org.openecomp
	xacml.policy.msPolicyName=http://org.openecomp/policy