| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| |
| # This is a script that contains specific test functions for A1 Controller API |
| |
| # Generic function to query the RICs via the A1-controller API. |
| # args: <operation> <url> [<body>] |
| # <operation>: getA1Policy,putA1Policy,getA1PolicyType,deleteA1Policy,getA1PolicyStatus |
| # response: <json-body><3-digit-response-code> |
| # (Not for test scripts) |
| __do_curl_to_controller() { |
| echo " (${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| if [ $# -ne 2 ] && [ $# -ne 3 ]; then |
| ((RES_CONF_FAIL++)) |
| echo "-Incorrect number of parameters to __do_curl_to_controller " $@ >> $HTTPLOG |
| echo "-Expected: <operation> <url> [<body>]" >> $HTTPLOG |
| echo "-Returning response 000" >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| if [ $# -eq 2 ]; then |
| json='{"input":{"near-rt-ric-url":"'$2'"}}' |
| else |
| # Escape quotes in the body |
| body=$(echo "$3" | sed 's/"/\\"/g') |
| json='{"input":{"near-rt-ric-url":"'$2'","body":"'"$body"'"}}' |
| fi |
| echo "$json" > .sdnc.payload.json |
| echo " FILE: $json" >> $HTTPLOG |
| curlString="curl -skw %{http_code} -X POST $SDNC_HTTPX://$SDNC_USER:$SDNC_PWD@localhost:$SDNC_LOCAL_PORT$SDNC_API_URL$1 -H accept:application/json -H Content-Type:application/json --data-binary @.sdnc.payload.json" |
| echo " CMD: "$curlString >> $HTTPLOG |
| res=$($curlString) |
| retcode=$? |
| echo " RESP: "$res >> $HTTPLOG |
| if [ $retcode -ne 0 ]; then |
| echo " RETCODE: "$retcode >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| |
| status=${res:${#res}-3} |
| |
| if [ $status -ne 200 ]; then |
| echo "000" |
| return 1 |
| fi |
| body=${res:0:${#res}-3} |
| echo " JSON: "$body >> $HTTPLOG |
| echo "$body" > .sdnc-reply.json |
| res=$(python3 ../common/extract_sdnc_reply.py .sdnc-reply.json) |
| echo " EXTRACED BODY+CODE: "$res >> $HTTPLOG |
| echo "$res" |
| return 0 |
| } |
| |
| # Controller API Test function: getA1Policy (return ids only) |
| # arg: <response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) | ( STD <ric-id> [ <policy-id> [<policy-id>]* ] ) |
| # (Function for test scripts) |
| controller_api_get_A1_policy_ids() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| paramError=1 |
| if [ $# -gt 3 ] && [ $2 == "OSC" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/a1-p/policytypes/$4/policies" |
| paramError=0 |
| elif [ $# -gt 2 ] && [ $2 == "STD" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/A1-P/v1/policies" |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) | ( STD <ric-id> [ <policy-id> [<policy-id>]* ] )" $@ |
| return 1 |
| fi |
| |
| res=$(__do_curl_to_controller getA1Policy "$url") |
| retcode=$? |
| status=${res:${#res}-3} |
| |
| if [ $? -ne 0 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status "(likely remote server error)"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| body=${res:0:${#res}-3} |
| |
| targetJson="[" |
| start=4 |
| if [ $2 == "OSC" ]; then |
| start=5 |
| fi |
| for pid in ${@:$start} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"\"$pid\"" |
| done |
| targetJson=$targetJson"]" |
| |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| |
| # Controller API Test function: getA1PolicyType |
| # arg: <response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>] |
| # (Function for test scripts) |
| controller_api_get_A1_policy_type() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| paramError=1 |
| if [ $# -gt 3 ] && [ $2 == "OSC" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/a1-p/policytypes/$4" |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]" $@ |
| return 1 |
| fi |
| |
| res=$(__do_curl_to_controller getA1PolicyType "$url") |
| retcode=$? |
| status=${res:${#res}-3} |
| |
| if [ $? -ne 0 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status "(likely remote server error)"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| body=${res:0:${#res}-3} |
| |
| if [ $# -eq 5 ]; then |
| |
| body=${res:0:${#res}-3} |
| |
| targetJson=$(< $5) |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # Controller API Test function: deleteA1Policy |
| # arg: <response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>) |
| # (Function for test scripts) |
| controller_api_delete_A1_policy() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| paramError=1 |
| if [ $# -eq 5 ] && [ $2 == "OSC" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/a1-p/policytypes/$4/policies/$5" |
| paramError=0 |
| elif [ $# -eq 4 ] && [ $2 == "STD" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/A1-P/v1/policies/$4" |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>)" $@ |
| return 1 |
| fi |
| |
| res=$(__do_curl_to_controller deleteA1Policy "$url") |
| retcode=$? |
| status=${res:${#res}-3} |
| |
| if [ $? -ne 0 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status "(likely remote server error)"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # Controller API Test function: putA1Policy |
| # arg: <response-code> (STD <ric-id> <policy-id> <template-file> ) | (OSC <ric-id> <policy-type-id> <policy-id> <template-file>) |
| # (Function for test scripts) |
| controller_api_put_A1_policy() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| paramError=1 |
| if [ $# -eq 6 ] && [ $2 == "OSC" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/a1-p/policytypes/$4/policies/$5" |
| body=$(sed 's/XXX/'${5}'/g' $6) |
| |
| paramError=0 |
| elif [ $# -eq 5 ] && [ $2 == "STD" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/A1-P/v1/policies/$4" |
| body=$(sed 's/XXX/'${4}'/g' $5) |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>)" $@ |
| return 1 |
| fi |
| |
| res=$(__do_curl_to_controller putA1Policy "$url" "$body") |
| retcode=$? |
| status=${res:${#res}-3} |
| |
| if [ $? -ne 0 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status "(likely remote server error)"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| |
| # Controller API Test function: getA1PolicyStatus |
| # arg: <response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) | (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>) |
| # (Function for test scripts) |
| controller_api_get_A1_policy_status() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| targetJson="" |
| paramError=1 |
| if [ $# -ge 5 ] && [ $2 == "OSC" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/a1-p/policytypes/$4/policies/$5/status" |
| if [ $# -gt 5 ]; then |
| targetJson="{\"instance_status\":\"$6\"" |
| targetJson=$targetJson",\"has_been_deleted\":\"$7\"" |
| targetJson=$targetJson",\"created_at\":\"????\"}" |
| fi |
| paramError=0 |
| elif [ $# -ge 4 ] && [ $2 == "STD" ]; then |
| url="http://$3:$RIC_SIM_INTERNAL_PORT/A1-P/v1/policies/$4/status" |
| if [ $# -gt 4 ]; then |
| targetJson="{\"enforceStatus\":\"$5\"" |
| if [ $# -eq 6 ]; then |
| targetJson=$targetJson",\"reason\":\"$6\"" |
| fi |
| targetJson=$targetJson"}" |
| fi |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) | (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)" $@ |
| return 1 |
| fi |
| |
| res=$(__do_curl_to_controller getA1PolicyStatus "$url") |
| retcode=$? |
| status=${res:${#res}-3} |
| |
| if [ $? -ne 0 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status "(likely remote server error)"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ ! -z "$targetJson" ]; then |
| |
| body=${res:0:${#res}-3} |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |