test/common/cr_api_functions.sh - oransc/nonrtric - Gitiles

 #!/bin/bash

 #  ============LICENSE_START===============================================
 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
 #  ========================================================================
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #  ============LICENSE_END=================================================
 #

 # This is a script that contains container/service managemnt functions test functions for the Callback Reciver


 ################ Test engine functions ################

 # Create the image var used during the test
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __CR_imagesetup() {
 	__check_and_create_image_var CR "CR_IMAGE" "CR_IMAGE_BASE" "CR_IMAGE_TAG" LOCAL "$CR_DISPLAY_NAME"
 }

 # Pull image from remote repo or use locally built image
 # arg: <pull-policy-override> <pull-policy-original>
 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
 # <pull-policy-original> Shall be used for images that does not allow overriding
 # Both var may contain: 'remote', 'remote-remove' or 'local'
 __CR_imagepull() {
 	echo -e $RED" Image for app CR shall never be pulled from remote repo"$ERED
 }

 # Build image (only for simulator or interfaces stubs owned by the test environment)
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __CR_imagebuild() {
 	cd ../cr
 	echo " Building CR - $CR_DISPLAY_NAME - image: $CR_IMAGE"
 	docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $CR_IMAGE . &> .dockererr
 	if [ $? -eq 0 ]; then
 		echo -e  $GREEN"  Build Ok"$EGREEN
 		__retag_and_push_image CR_IMAGE
 		if [ $? -ne 0 ]; then
 			exit 1
 		fi
 	else
 		echo -e $RED"  Build Failed"$ERED
 		((RES_CONF_FAIL++))
 		cat .dockererr
 		echo -e $RED"Exiting...."$ERED
 		exit 1
 	fi
 }

 # Generate a string for each included image using the app display name and a docker images format string
 # If a custom image repo is used then also the source image from the local repo is listed
 # arg: <docker-images-format-string> <file-to-append>
 __CR_image_data() {
 	echo -e "$CR_DISPLAY_NAME\t$(docker images --format $1 $CR_IMAGE)" >>   $2
 	if [ ! -z "$CR_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $CR_IMAGE_SOURCE)" >>   $2
 	fi
 }

 # Scale kubernetes resources to zero
 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 # This function is called for apps fully managed by the test script
 __CR_kube_scale_zero() {
 	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest CR
 }

 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 # This function is called for prestarted apps not managed by the test script.
 __CR_kube_scale_zero_and_wait() {
 	echo -e $RED" CR app is not scaled in this state"$ERED
 }

 # Delete all kube resouces for the app
 # This function is called for apps managed by the test script.
 __CR_kube_delete_all() {
 	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest CR
 }

 # Store docker logs
 # This function is called for apps managed by the test script.
 # args: <log-dir> <file-prexix>
 __CR_store_docker_logs() {
 	if [ $RUNMODE == "KUBE" ]; then
 		kubectl  logs -l "autotest=CR" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_cr.log 2>&1
 	else
 		docker logs $CR_APP_NAME > $1$2_cr.log 2>&1
 	fi
 }

 # Initial setup of protocol, host and ports
 # This function is called for apps managed by the test script.
 # args: -
 __CR_initial_setup() {
 	use_cr_http
 }

 # Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
 # For docker, the namespace shall be excluded
 # This function is called for apps managed by the test script as well as for prestarted apps.
 # args: -
 __CR_statisics_setup() {
 	if [ $RUNMODE == "KUBE" ]; then
 		echo "CR $CR_APP_NAME $KUBE_SIM_NAMESPACE"
 	else
 		echo "CR $CR_APP_NAME"
 	fi
 }

 #######################################################

 ################
 ### CR functions
 ################

 # Set http as the protocol to use for all communication to the Dmaap adapter
 # args: -
 # (Function for test scripts)
 use_cr_http() {
 	__cr_set_protocoll "http" $CR_INTERNAL_PORT $CR_EXTERNAL_PORT
 }

 # Set https as the protocol to use for all communication to the Dmaap adapter
 # args: -
 # (Function for test scripts)
 use_cr_https() {
 	__cr_set_protocoll "https" $CR_INTERNAL_SECURE_PORT $CR_EXTERNAL_SECURE_PORT
 }

 # Setup paths to svc/container for internal and external access
 # args: <protocol> <internal-port> <external-port>
 __cr_set_protocoll() {
 	echo -e $BOLD"$CR_DISPLAY_NAME protocol setting"$EBOLD
 	echo -e " Using $BOLD http $EBOLD towards $CR_DISPLAY_NAME"

 	## Access to Dmaap adapter

 	# CR_SERVICE_PATH is the base path to cr
 	CR_SERVICE_PATH=$1"://"$CR_APP_NAME":"$2  # docker access, container->container and script->container via proxy
 	if [ $RUNMODE == "KUBE" ]; then
 		CR_SERVICE_PATH=$1"://"$CR_APP_NAME.$KUBE_SIM_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
 	fi
 	# Service paths are used in test script to provide callbacck urls to app
 	CR_SERVICE_MR_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK_MR  #Only for messages from dmaap adapter/mediator
 	CR_SERVICE_TEXT_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK_TEXT  #Callbacks for text payload
 	CR_SERVICE_APP_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK    #For general callbacks from apps

 	# CR_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
 	CR_ADAPTER_TYPE="REST"
 	CR_ADAPTER=$CR_SERVICE_PATH

 	echo ""
 }

 # Export env vars for config files, docker compose and kube resources
 # args: <proxy-flag>
 __cr_export_vars() {
 	export CR_APP_NAME
 	export CR_DISPLAY_NAME

 	export KUBE_SIM_NAMESPACE
 	export DOCKER_SIM_NWNAME

 	export CR_IMAGE

 	export CR_INTERNAL_PORT
 	export CR_INTERNAL_SECURE_PORT
 	export CR_EXTERNAL_PORT
 	export CR_EXTERNAL_SECURE_PORT
 }

 # Start the Callback reciver in the simulator group
 # args: -
 # (Function for test scripts)
 start_cr() {

 	echo -e $BOLD"Starting $CR_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then

 		# Check if app shall be fully managed by the test script
 		__check_included_image "CR"
 		retcode_i=$?

 		# Check if app shall only be used by the testscipt
 		__check_prestarted_image "CR"
 		retcode_p=$?

 		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
 			echo -e $RED"The $CR_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
 			echo -e $RED"The $CR_APP_NAME will not be started"$ERED
 			exit
 		fi
 		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
 			echo -e $RED"The $CR_APP_NAME app is included both as managed and prestarted in this test script"$ERED
 			echo -e $RED"The $CR_APP_NAME will not be started"$ERED
 			exit
 		fi

 		# Check if app shall be used - not managed - by the test script
 		if [ $retcode_p -eq 0 ]; then
 			echo -e " Using existing $CR_APP_NAME deployment and service"
 			echo " Setting CR replicas=1"
 			__kube_scale deployment $CR_APP_NAME $KUBE_SIM_NAMESPACE 1
 		fi

 		if [ $retcode_i -eq 0 ]; then
 			echo -e " Creating $CR_APP_NAME deployment and service"

 			__cr_export_vars

 			__kube_create_namespace $KUBE_SIM_NAMESPACE

 			# Create service
 			input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"svc.yaml
 			output_yaml=$PWD/tmp/cr_svc.yaml
 			__kube_create_instance service $CR_APP_NAME $input_yaml $output_yaml

 			# Create app
 			input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"app.yaml
 			output_yaml=$PWD/tmp/cr_app.yaml
 			__kube_create_instance app $CR_APP_NAME $input_yaml $output_yaml

 		fi

 		__check_service_start $CR_APP_NAME $CR_SERVICE_PATH$CR_ALIVE_URL

 		echo -ne " Service $CR_APP_NAME - reset  "$SAMELINE
 		result=$(__do_curl CR $CR_SERVICE_PATH/reset)
 		if [ $? -ne 0 ]; then
 			echo -e " Service $CR_APP_NAME - reset  $RED Failed $ERED - will continue"
 		else
 			echo -e " Service $CR_APP_NAME - reset  $GREEN OK $EGREEN"
 		fi
 	else
 		# Check if docker app shall be fully managed by the test script
 		__check_included_image 'CR'
 		if [ $? -eq 1 ]; then
 			echo -e $RED"The Callback Receiver app is not included in this test script"$ERED
 			echo -e $RED"The Callback Receiver will not be started"$ERED
 			exit
 		fi

 		__cr_export_vars

 		__start_container $CR_COMPOSE_DIR "" NODOCKERARGS 1 $CR_APP_NAME

         __check_service_start $CR_APP_NAME $CR_SERVICE_PATH$CR_ALIVE_URL
 	fi
 	echo ""
 }


 # Tests if a variable value in the CR is equal to a target value and and optional timeout.
 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
 # equal to the target or not.
 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
 # before setting pass or fail depending on if the variable value becomes equal to the target
 # value or not.
 # (Function for test scripts)
 cr_equal() {
 	if [ $# -eq 2 ] || [ $# -eq 3 ]; then
 		__var_test "CR" "$CR_SERVICE_PATH/counter/" $1 "=" $2 $3
 	else
 		__print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
 	fi
 }

 # Tests if a variable value in the CR contains the target string and and optional timeout
 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable contains
 # the target or not.
 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
 # before setting pass or fail depending on if the variable value contains the target
 # value or not.
 # (Function for test scripts)
 cr_contains_str() {

 	if [ $# -eq 2 ] || [ $# -eq 3 ]; then
 		__var_test "CR" "$CR_SERVICE_PATH/counter/" $1 "contain_str" $2 $3
 		return 0
 	else
 		__print_err "needs two or three args: <sim-param> <target-value> [ timeout ]"
 		return 1
 	fi
 }

 # Read a variable value from CR sim and send to stdout. Arg: <variable-name>
 cr_read() {
 	echo "$(__do_curl $CR_SERVICE_PATH/counter/$1)"
 }

 # Function to configure write delay on callbacks
 # Delay given in seconds.
 # arg <response-code> <delay-in-sec>
 # (Function for test scripts)
 cr_delay_callback() {
 	__log_conf_start $@

 	if [ $# -ne 2 ]; then
         __print_err "<response-code> <delay-in-sec>]" $@
         return 1
 	fi

 	res="$(__do_curl_to_api CR POST /forcedelay?delay=$2)"
 	status=${res:${#res}-3}

 	if [ $status -ne 200 ]; then
 		__log_conf_fail_status_code $1 $status
 		return 1
 	fi

 	__log_conf_ok
 	return 0
 }

 # CR API: Check the contents of all current ric sync events for one id from PMS
 # <response-code> <id> [ EMPTY | ( <ric-id> )+ ]
 # (Function for test scripts)
 cr_api_check_all_sync_events() {
 	__log_test_start $@

 	if [ "$PMS_VERSION" != "V2" ]; then
 		__log_test_fail_not_supported
 		return 1
 	fi

     if [ $# -lt 2 ]; then
         __print_err "<response-code> <id> [ EMPTY | ( <ric-id> )+ ]" $@
         return 1
     fi

 	query="/get-all-events/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	if [ $# -gt 2 ]; then
 		body=${res:0:${#res}-3}
 		if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
 			targetJson="["
 		else
 			targetJson="["
 			arr=(${@:3})

 			for ((i=0; i<$(($#-2)); i=i+1)); do

 				if [ "$targetJson" != "[" ]; then
 					targetJson=$targetJson","
 				fi
 				targetJson=$targetJson"{\"ric_id\":\"${arr[$i]}\",\"event_type\":\"AVAILABLE\"}"
 			done
 		fi

 		targetJson=$targetJson"]"
 		echo "TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi
 	__log_test_pass
 	return 0
 }

 # CR API: Check the contents of all current status events for one id from ECS
 # <response-code> <id> [ EMPTY | ( <status> )+ ]
 # (Function for test scripts)
 cr_api_check_all_ecs_events() {
 	__log_test_start $@

     if [ $# -lt 2 ]; then
         __print_err "<response-code> <id> [ EMPTY | ( <status> )+ ]" $@
         return 1
     fi

 	query="/get-all-events/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	if [ $# -gt 2 ]; then
 		body=${res:0:${#res}-3}
 		if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
 			targetJson="["
 		else
 			targetJson="["
 			arr=(${@:3})

 			for ((i=0; i<$(($#-2)); i=i+1)); do

 				if [ "$targetJson" != "[" ]; then
 					targetJson=$targetJson","
 				fi
 				targetJson=$targetJson"{\"eiJobStatus\":\"${arr[$i]}\"}"
 			done
 		fi

 		targetJson=$targetJson"]"
 		echo "TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi
 	__log_test_pass
 	return 0
 }

 # CR API: Check the contents of all current type subscription events for one id from ECS
 # <response-code> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]
 # (Function for test scripts)
 cr_api_check_all_ecs_subscription_events() {
 	__log_test_start $@

 	#Valid number of parameter 2,3,7,11
 	paramError=1
 	if [ $# -eq 2 ]; then
 		paramError=0
 	fi
 	if [ $# -eq 3 ] && [ "$3" == "EMPTY" ]; then
 		paramError=0
 	fi
 	variablecount=$(($#-2))
 	if [ $# -gt 3 ] && [ $(($variablecount%3)) -eq 0 ]; then
 		paramError=0
 	fi
 	if [ $paramError -eq 1 ]; then
 		__print_err "<response-code> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]" $@
 		return 1
 	fi

 	query="/get-all-events/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	if [ $# -gt 2 ]; then
 		body=${res:0:${#res}-3}
 		targetJson="["
 		if [ $# -gt 3 ]; then
 			arr=(${@:3})
 			for ((i=0; i<$(($#-3)); i=i+3)); do
 				if [ "$targetJson" != "[" ]; then
 					targetJson=$targetJson","
 				fi
 				if [ -f ${arr[$i+1]} ]; then
 					jobfile=$(cat ${arr[$i+1]})
 				else
 					__log_test_fail_general "Job schema file "${arr[$i+1]}", does not exist"
 					return 1
 				fi
 				targetJson=$targetJson"{\"info_type_id\":\"${arr[$i]}\",\"job_data_schema\":$jobfile,\"status\":\"${arr[$i+2]}\"}"
 			done
 		fi
 		targetJson=$targetJson"]"

 		echo " TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi

 	__log_test_pass
 	return 0
 }


 # CR API: Reset all events and counters
 # Arg: -
 # (Function for test scripts)
 cr_api_reset() {
 	__log_conf_start $@

 	res="$(__do_curl_to_api CR GET /reset)"
 	status=${res:${#res}-3}

 	if [ $status -ne 200 ]; then
 		__log_conf_fail_status_code $1 $status
 		return 1
 	fi

 	__log_conf_ok
 	return 0
 }


 # CR API: Check the contents of all json events for path
 # <response-code> <topic-url> (EMPTY | <json-msg>+ )
 # (Function for test scripts)
 cr_api_check_all_genric_json_events() {
 	__log_test_start $@

 	if [ $# -lt 3 ]; then
 		__print_err "<response-code> <topic-url> (EMPTY | <json-msg>+ )" $@
 		return 1
 	fi

 	query="/get-all-events/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
 	body=${res:0:${#res}-3}
 	targetJson="["

 	if [ $3 != "EMPTY" ]; then
 		shift
 		shift
 		while [ $# -gt 0 ]; do
 			if [ "$targetJson" != "[" ]; then
 				targetJson=$targetJson","
 			fi
 			targetJson=$targetJson$1
 			shift
 		done
 	fi
 	targetJson=$targetJson"]"

 	echo " TARGET JSON: $targetJson" >> $HTTPLOG
 	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 	if [ $res -ne 0 ]; then
 		__log_test_fail_body
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }


 # CR API: Check a single (oldest) json event (or none if empty) for path
 # <response-code> <topic-url> (EMPTY | <json-msg> )
 # (Function for test scripts)
 cr_api_check_single_genric_json_event() {
 	__log_test_start $@

 	if [ $# -ne 3 ]; then
 		__print_err "<response-code> <topic-url> (EMPTY | <json-msg> )" $@
 		return 1
 	fi

 	query="/get-event/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
 	body=${res:0:${#res}-3}
 	targetJson=$3

 	if [ $targetJson == "EMPTY" ] && [ ${#body} -ne 0 ]; then
 		__log_test_fail_body
 		return 1
 	fi
 	echo " TARGET JSON: $targetJson" >> $HTTPLOG
 	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 	if [ $res -ne 0 ]; then
 		__log_test_fail_body
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # CR API: Check a single (oldest) json in md5 format (or none if empty) for path.
 # Note that if a json message is given, it shall be compact, no ws except inside string.
 # The MD5 will generate different hash if ws is present or not in otherwise equivalent json
 # arg: <response-code> <topic-url> (EMPTY | <data-msg> )
 # (Function for test scripts)
 cr_api_check_single_genric_event_md5() {
 	__log_test_start $@

 	if [ $# -ne 3 ]; then
 		__print_err "<response-code> <topic-url> (EMPTY | <data-msg> )" $@
 		return 1
 	fi

 	query="/get-event/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
 	body=${res:0:${#res}-3}
 	if [ $3 == "EMPTY" ]; then
 		if [ ${#body} -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		else
 			__log_test_pass
 			return 0
 		fi
 	fi
 	command -v md5 > /dev/null # Mac
 	if [ $? -eq 0 ]; then
 		targetMd5=$(echo -n "$3" | md5)
 	else
 		command -v md5sum > /dev/null # Linux
 		if [ $? -eq 0 ]; then
 			targetMd5=$(echo -n "$3" | md5sum | cut -d' ' -f 1)  # Need to cut additional info printed by cmd
 		else
 			__log_test_fail_general "Command md5 nor md5sum is available"
 			return 1
 		fi
 	fi
 	targetMd5="\""$targetMd5"\"" #Quotes needed

 	echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG

 	if [ "$body" != "$targetMd5" ]; then
 		__log_test_fail_body
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # CR API: Check a single (oldest) event in md5 format (or none if empty) for path.
 # Note that if a file with json message is given, the json shall be compact, no ws except inside string and not newlines.
 # The MD5 will generate different hash if ws/newlines is present or not in otherwise equivalent json
 # arg: <response-code> <topic-url> (EMPTY | <data-file> )
 # (Function for test scripts)
 cr_api_check_single_genric_event_md5_file() {
 	__log_test_start $@

 	if [ $# -ne 3 ]; then
 		__print_err "<response-code> <topic-url> (EMPTY | <data-file> )" $@
 		return 1
 	fi

 	query="/get-event/"$2
 	res="$(__do_curl_to_api CR GET $query)"
 	status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
 	body=${res:0:${#res}-3}
 	if [ $3 == "EMPTY" ]; then
 		if [ ${#body} -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		else
 			__log_test_pass
 			return 0
 		fi
 	fi

 	if [ ! -f $3 ]; then
 		__log_test_fail_general "File $3 does not exist"
 		return 1
 	fi

 	filedata=$(cat $3)

 	command -v md5 > /dev/null # Mac
 	if [ $? -eq 0 ]; then
 		targetMd5=$(echo -n "$filedata" | md5)
 	else
 		command -v md5sum > /dev/null # Linux
 		if [ $? -eq 0 ]; then
 			targetMd5=$(echo -n "$filedata" | md5sum | cut -d' ' -f 1)  # Need to cut additional info printed by cmd
 		else
 			__log_test_fail_general "Command md5 nor md5sum is available"
 			return 1
 		fi
 	fi
 	targetMd5="\""$targetMd5"\""   #Quotes needed

 	echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG

 	if [ "$body" != "$targetMd5" ]; then
 		__log_test_fail_body
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }
	#!/bin/bash

	# ============LICENSE_START===============================================
	# Copyright (C) 2020 Nordix Foundation. All rights reserved.
	# ========================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=================================================
	#

	# This is a script that contains container/service managemnt functions test functions for the Callback Reciver


	################ Test engine functions ################

	# Create the image var used during the test
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__CR_imagesetup() {
	__check_and_create_image_var CR "CR_IMAGE" "CR_IMAGE_BASE" "CR_IMAGE_TAG" LOCAL "$CR_DISPLAY_NAME"
	}

	# Pull image from remote repo or use locally built image
	# arg: <pull-policy-override> <pull-policy-original>
	# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
	# <pull-policy-original> Shall be used for images that does not allow overriding
	# Both var may contain: 'remote', 'remote-remove' or 'local'
	__CR_imagepull() {
	echo -e $RED" Image for app CR shall never be pulled from remote repo"$ERED
	}

	# Build image (only for simulator or interfaces stubs owned by the test environment)
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__CR_imagebuild() {
	cd ../cr
	echo " Building CR - $CR_DISPLAY_NAME - image: $CR_IMAGE"
	docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $CR_IMAGE . &> .dockererr
	if [ $? -eq 0 ]; then
	echo -e $GREEN" Build Ok"$EGREEN
	__retag_and_push_image CR_IMAGE
	if [ $? -ne 0 ]; then
	exit 1
	fi
	else
	echo -e $RED" Build Failed"$ERED
	((RES_CONF_FAIL++))
	cat .dockererr
	echo -e $RED"Exiting...."$ERED
	exit 1
	fi
	}

	# Generate a string for each included image using the app display name and a docker images format string
	# If a custom image repo is used then also the source image from the local repo is listed
	# arg: <docker-images-format-string> <file-to-append>
	__CR_image_data() {
	echo -e "$CR_DISPLAY_NAME\t$(docker images --format $1 $CR_IMAGE)" >> $2
	if [ ! -z "$CR_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $CR_IMAGE_SOURCE)" >> $2
	fi
	}

	# Scale kubernetes resources to zero
	# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
	# This function is called for apps fully managed by the test script
	__CR_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest CR
	}

	# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
	# This function is called for prestarted apps not managed by the test script.
	__CR_kube_scale_zero_and_wait() {
	echo -e $RED" CR app is not scaled in this state"$ERED
	}

	# Delete all kube resouces for the app
	# This function is called for apps managed by the test script.
	__CR_kube_delete_all() {
	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest CR
	}

	# Store docker logs
	# This function is called for apps managed by the test script.
	# args: <log-dir> <file-prexix>
	__CR_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
	kubectl logs -l "autotest=CR" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_cr.log 2>&1
	else
	docker logs $CR_APP_NAME > $1$2_cr.log 2>&1
	fi
	}

	# Initial setup of protocol, host and ports
	# This function is called for apps managed by the test script.
	# args: -
	__CR_initial_setup() {
	use_cr_http
	}

	# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
	# For docker, the namespace shall be excluded
	# This function is called for apps managed by the test script as well as for prestarted apps.
	# args: -
	__CR_statisics_setup() {
	if [ $RUNMODE == "KUBE" ]; then
	echo "CR $CR_APP_NAME $KUBE_SIM_NAMESPACE"
	else
	echo "CR $CR_APP_NAME"
	fi
	}

	#######################################################

	################
	### CR functions
	################

	# Set http as the protocol to use for all communication to the Dmaap adapter
	# args: -
	# (Function for test scripts)
	use_cr_http() {
	__cr_set_protocoll "http" $CR_INTERNAL_PORT $CR_EXTERNAL_PORT
	}

	# Set https as the protocol to use for all communication to the Dmaap adapter
	# args: -
	# (Function for test scripts)
	use_cr_https() {
	__cr_set_protocoll "https" $CR_INTERNAL_SECURE_PORT $CR_EXTERNAL_SECURE_PORT
	}

	# Setup paths to svc/container for internal and external access
	# args: <protocol> <internal-port> <external-port>
	__cr_set_protocoll() {
	echo -e $BOLD"$CR_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD towards $CR_DISPLAY_NAME"

	## Access to Dmaap adapter

	# CR_SERVICE_PATH is the base path to cr
	CR_SERVICE_PATH=$1"://"$CR_APP_NAME":"$2 # docker access, container->container and script->container via proxy
	if [ $RUNMODE == "KUBE" ]; then
	CR_SERVICE_PATH=$1"://"$CR_APP_NAME.$KUBE_SIM_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
	fi
	# Service paths are used in test script to provide callbacck urls to app
	CR_SERVICE_MR_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK_MR #Only for messages from dmaap adapter/mediator
	CR_SERVICE_TEXT_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK_TEXT #Callbacks for text payload
	CR_SERVICE_APP_PATH=$CR_SERVICE_PATH$CR_APP_CALLBACK #For general callbacks from apps

	# CR_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
	CR_ADAPTER_TYPE="REST"
	CR_ADAPTER=$CR_SERVICE_PATH

	echo ""
	}

	# Export env vars for config files, docker compose and kube resources
	# args: <proxy-flag>
	__cr_export_vars() {
	export CR_APP_NAME
	export CR_DISPLAY_NAME

	export KUBE_SIM_NAMESPACE
	export DOCKER_SIM_NWNAME

	export CR_IMAGE

	export CR_INTERNAL_PORT
	export CR_INTERNAL_SECURE_PORT
	export CR_EXTERNAL_PORT
	export CR_EXTERNAL_SECURE_PORT
	}

	# Start the Callback reciver in the simulator group
	# args: -
	# (Function for test scripts)
	start_cr() {

	echo -e $BOLD"Starting $CR_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

	# Check if app shall be fully managed by the test script
	__check_included_image "CR"
	retcode_i=$?

	# Check if app shall only be used by the testscipt
	__check_prestarted_image "CR"
	retcode_p=$?

	if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
	echo -e $RED"The $CR_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
	echo -e $RED"The $CR_APP_NAME will not be started"$ERED
	exit
	fi
	if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
	echo -e $RED"The $CR_APP_NAME app is included both as managed and prestarted in this test script"$ERED
	echo -e $RED"The $CR_APP_NAME will not be started"$ERED
	exit
	fi

	# Check if app shall be used - not managed - by the test script
	if [ $retcode_p -eq 0 ]; then
	echo -e " Using existing $CR_APP_NAME deployment and service"
	echo " Setting CR replicas=1"
	__kube_scale deployment $CR_APP_NAME $KUBE_SIM_NAMESPACE 1
	fi

	if [ $retcode_i -eq 0 ]; then
	echo -e " Creating $CR_APP_NAME deployment and service"

	__cr_export_vars

	__kube_create_namespace $KUBE_SIM_NAMESPACE

	# Create service
	input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"svc.yaml
	output_yaml=$PWD/tmp/cr_svc.yaml
	__kube_create_instance service $CR_APP_NAME $input_yaml $output_yaml

	# Create app
	input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"app.yaml
	output_yaml=$PWD/tmp/cr_app.yaml
	__kube_create_instance app $CR_APP_NAME $input_yaml $output_yaml

	fi

	__check_service_start $CR_APP_NAME $CR_SERVICE_PATH$CR_ALIVE_URL

	echo -ne " Service $CR_APP_NAME - reset "$SAMELINE
	result=$(__do_curl CR $CR_SERVICE_PATH/reset)
	if [ $? -ne 0 ]; then
	echo -e " Service $CR_APP_NAME - reset $RED Failed $ERED - will continue"
	else
	echo -e " Service $CR_APP_NAME - reset $GREEN OK $EGREEN"
	fi
	else
	# Check if docker app shall be fully managed by the test script
	__check_included_image 'CR'
	if [ $? -eq 1 ]; then
	echo -e $RED"The Callback Receiver app is not included in this test script"$ERED
	echo -e $RED"The Callback Receiver will not be started"$ERED
	exit
	fi

	__cr_export_vars

	__start_container $CR_COMPOSE_DIR "" NODOCKERARGS 1 $CR_APP_NAME

	__check_service_start $CR_APP_NAME $CR_SERVICE_PATH$CR_ALIVE_URL
	fi
	echo ""
	}


	# Tests if a variable value in the CR is equal to a target value and and optional timeout.
	# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
	# equal to the target or not.
	# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
	# before setting pass or fail depending on if the variable value becomes equal to the target
	# value or not.
	# (Function for test scripts)
	cr_equal() {
	if [ $# -eq 2 ] \|\| [ $# -eq 3 ]; then
	__var_test "CR" "$CR_SERVICE_PATH/counter/" $1 "=" $2 $3
	else
	__print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
	fi
	}

	# Tests if a variable value in the CR contains the target string and and optional timeout
	# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable contains
	# the target or not.
	# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
	# before setting pass or fail depending on if the variable value contains the target
	# value or not.
	# (Function for test scripts)
	cr_contains_str() {

	if [ $# -eq 2 ] \|\| [ $# -eq 3 ]; then
	__var_test "CR" "$CR_SERVICE_PATH/counter/" $1 "contain_str" $2 $3
	return 0
	else
	__print_err "needs two or three args: <sim-param> <target-value> [ timeout ]"
	return 1
	fi
	}

	# Read a variable value from CR sim and send to stdout. Arg: <variable-name>
	cr_read() {
	echo "$(__do_curl $CR_SERVICE_PATH/counter/$1)"
	}

	# Function to configure write delay on callbacks
	# Delay given in seconds.
	# arg <response-code> <delay-in-sec>
	# (Function for test scripts)
	cr_delay_callback() {
	__log_conf_start $@

	if [ $# -ne 2 ]; then
	__print_err "<response-code> <delay-in-sec>]" $@
	return 1
	fi

	res="$(__do_curl_to_api CR POST /forcedelay?delay=$2)"
	status=${res:${#res}-3}

	if [ $status -ne 200 ]; then
	__log_conf_fail_status_code $1 $status
	return 1
	fi

	__log_conf_ok
	return 0
	}

	# CR API: Check the contents of all current ric sync events for one id from PMS
	# <response-code> <id> [ EMPTY \| ( <ric-id> )+ ]
	# (Function for test scripts)
	cr_api_check_all_sync_events() {
	__log_test_start $@

	if [ "$PMS_VERSION" != "V2" ]; then
	__log_test_fail_not_supported
	return 1
	fi

	if [ $# -lt 2 ]; then
	__print_err "<response-code> <id> [ EMPTY \| ( <ric-id> )+ ]" $@
	return 1
	fi

	query="/get-all-events/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	if [ $# -gt 2 ]; then
	body=${res:0:${#res}-3}
	if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
	targetJson="["
	else
	targetJson="["
	arr=(${@:3})

	for ((i=0; i<$(($#-2)); i=i+1)); do

	if [ "$targetJson" != "[" ]; then
	targetJson=$targetJson","
	fi
	targetJson=$targetJson"{\"ric_id\":\"${arr[$i]}\",\"event_type\":\"AVAILABLE\"}"
	done
	fi

	targetJson=$targetJson"]"
	echo "TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi
	__log_test_pass
	return 0
	}

	# CR API: Check the contents of all current status events for one id from ECS
	# <response-code> <id> [ EMPTY \| ( <status> )+ ]
	# (Function for test scripts)
	cr_api_check_all_ecs_events() {
	__log_test_start $@

	if [ $# -lt 2 ]; then
	__print_err "<response-code> <id> [ EMPTY \| ( <status> )+ ]" $@
	return 1
	fi

	query="/get-all-events/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	if [ $# -gt 2 ]; then
	body=${res:0:${#res}-3}
	if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
	targetJson="["
	else
	targetJson="["
	arr=(${@:3})

	for ((i=0; i<$(($#-2)); i=i+1)); do

	if [ "$targetJson" != "[" ]; then
	targetJson=$targetJson","
	fi
	targetJson=$targetJson"{\"eiJobStatus\":\"${arr[$i]}\"}"
	done
	fi

	targetJson=$targetJson"]"
	echo "TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi
	__log_test_pass
	return 0
	}

	# CR API: Check the contents of all current type subscription events for one id from ECS
	# <response-code> <id> [ EMPTY \| ( <type-id> <schema> <registration-status> )+ ]
	# (Function for test scripts)
	cr_api_check_all_ecs_subscription_events() {
	__log_test_start $@

	#Valid number of parameter 2,3,7,11
	paramError=1
	if [ $# -eq 2 ]; then
	paramError=0
	fi
	if [ $# -eq 3 ] && [ "$3" == "EMPTY" ]; then
	paramError=0
	fi
	variablecount=$(($#-2))
	if [ $# -gt 3 ] && [ $(($variablecount%3)) -eq 0 ]; then
	paramError=0
	fi
	if [ $paramError -eq 1 ]; then
	__print_err "<response-code> <id> [ EMPTY \| ( <type-id> <schema> <registration-status> )+ ]" $@
	return 1
	fi

	query="/get-all-events/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	if [ $# -gt 2 ]; then
	body=${res:0:${#res}-3}
	targetJson="["
	if [ $# -gt 3 ]; then
	arr=(${@:3})
	for ((i=0; i<$(($#-3)); i=i+3)); do
	if [ "$targetJson" != "[" ]; then
	targetJson=$targetJson","
	fi
	if [ -f ${arr[$i+1]} ]; then
	jobfile=$(cat ${arr[$i+1]})
	else
	__log_test_fail_general "Job schema file "${arr[$i+1]}", does not exist"
	return 1
	fi
	targetJson=$targetJson"{\"info_type_id\":\"${arr[$i]}\",\"job_data_schema\":$jobfile,\"status\":\"${arr[$i+2]}\"}"
	done
	fi
	targetJson=$targetJson"]"

	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi

	__log_test_pass
	return 0
	}


	# CR API: Reset all events and counters
	# Arg: -
	# (Function for test scripts)
	cr_api_reset() {
	__log_conf_start $@

	res="$(__do_curl_to_api CR GET /reset)"
	status=${res:${#res}-3}

	if [ $status -ne 200 ]; then
	__log_conf_fail_status_code $1 $status
	return 1
	fi

	__log_conf_ok
	return 0
	}


	# CR API: Check the contents of all json events for path
	# <response-code> <topic-url> (EMPTY \| <json-msg>+ )
	# (Function for test scripts)
	cr_api_check_all_genric_json_events() {
	__log_test_start $@

	if [ $# -lt 3 ]; then
	__print_err "<response-code> <topic-url> (EMPTY \| <json-msg>+ )" $@
	return 1
	fi

	query="/get-all-events/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}
	targetJson="["

	if [ $3 != "EMPTY" ]; then
	shift
	shift
	while [ $# -gt 0 ]; do
	if [ "$targetJson" != "[" ]; then
	targetJson=$targetJson","
	fi
	targetJson=$targetJson$1
	shift
	done
	fi
	targetJson=$targetJson"]"

	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi

	__log_test_pass
	return 0
	}



	# CR API: Check a single (oldest) json event (or none if empty) for path
	# <response-code> <topic-url> (EMPTY \| <json-msg> )
	# (Function for test scripts)
	cr_api_check_single_genric_json_event() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <topic-url> (EMPTY \| <json-msg> )" $@
	return 1
	fi

	query="/get-event/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}
	targetJson=$3

	if [ $targetJson == "EMPTY" ] && [ ${#body} -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi

	__log_test_pass
	return 0
	}

	# CR API: Check a single (oldest) json in md5 format (or none if empty) for path.
	# Note that if a json message is given, it shall be compact, no ws except inside string.
	# The MD5 will generate different hash if ws is present or not in otherwise equivalent json
	# arg: <response-code> <topic-url> (EMPTY \| <data-msg> )
	# (Function for test scripts)
	cr_api_check_single_genric_event_md5() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <topic-url> (EMPTY \| <data-msg> )" $@
	return 1
	fi

	query="/get-event/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}
	if [ $3 == "EMPTY" ]; then
	if [ ${#body} -ne 0 ]; then
	__log_test_fail_body
	return 1
	else
	__log_test_pass
	return 0
	fi
	fi
	command -v md5 > /dev/null # Mac
	if [ $? -eq 0 ]; then
	targetMd5=$(echo -n "$3" \| md5)
	else
	command -v md5sum > /dev/null # Linux
	if [ $? -eq 0 ]; then
	targetMd5=$(echo -n "$3" \| md5sum \| cut -d' ' -f 1) # Need to cut additional info printed by cmd
	else
	__log_test_fail_general "Command md5 nor md5sum is available"
	return 1
	fi
	fi
	targetMd5="\""$targetMd5"\"" #Quotes needed

	echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG

	if [ "$body" != "$targetMd5" ]; then
	__log_test_fail_body
	return 1
	fi

	__log_test_pass
	return 0
	}

	# CR API: Check a single (oldest) event in md5 format (or none if empty) for path.
	# Note that if a file with json message is given, the json shall be compact, no ws except inside string and not newlines.
	# The MD5 will generate different hash if ws/newlines is present or not in otherwise equivalent json
	# arg: <response-code> <topic-url> (EMPTY \| <data-file> )
	# (Function for test scripts)
	cr_api_check_single_genric_event_md5_file() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <topic-url> (EMPTY \| <data-file> )" $@
	return 1
	fi

	query="/get-event/"$2
	res="$(__do_curl_to_api CR GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}
	if [ $3 == "EMPTY" ]; then
	if [ ${#body} -ne 0 ]; then
	__log_test_fail_body
	return 1
	else
	__log_test_pass
	return 0
	fi
	fi

	if [ ! -f $3 ]; then
	__log_test_fail_general "File $3 does not exist"
	return 1
	fi

	filedata=$(cat $3)

	command -v md5 > /dev/null # Mac
	if [ $? -eq 0 ]; then
	targetMd5=$(echo -n "$filedata" \| md5)
	else
	command -v md5sum > /dev/null # Linux
	if [ $? -eq 0 ]; then
	targetMd5=$(echo -n "$filedata" \| md5sum \| cut -d' ' -f 1) # Need to cut additional info printed by cmd
	else
	__log_test_fail_general "Command md5 nor md5sum is available"
	return 1
	fi
	fi
	targetMd5="\""$targetMd5"\"" #Quotes needed

	echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG

	if [ "$body" != "$targetMd5" ]; then
	__log_test_fail_body
	return 1
	fi

	__log_test_pass
	return 0
	}