test/common/a1pms_api_functions.sh

#!/bin/bash

#  ============LICENSE_START===============================================
#  Copyright (C) 2021 Nordix Foundation. All rights reserved.
#  ========================================================================
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#  ============LICENSE_END=================================================
#

# This is a script that contains management and test functions for A1PMS

################ Test engine functions ################

# Create the image var used during the test
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__A1PMS_imagesetup() {
	__check_and_create_image_var A1PMS "A1PMS_IMAGE" "A1PMS_IMAGE_BASE" "A1PMS_IMAGE_TAG" $1 "$A1PMS_DISPLAY_NAME"
}

# Pull image from remote repo or use locally built image
# arg: <pull-policy-override> <pull-policy-original>
# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__A1PMS_imagepull() {
	__check_and_pull_image $1 "$A1PMS_DISPLAY_NAME" $A1PMS_APP_NAME A1PMS_IMAGE
}

# Build image (only for simulator or interfaces stubs owned by the test environment)
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__A1PMS_imagebuild() {
	echo -e $RED" Image for app A1PMS shall never be built"$ERED
}

# Generate a string for each included image using the app display name and a docker images format string
# If a custom image repo is used then also the source image from the local repo is listed
# arg: <docker-images-format-string> <file-to-append>
__A1PMS_image_data() {
	echo -e "$A1PMS_DISPLAY_NAME\t$(docker images --format $1 $A1PMS_IMAGE)" >>   $2
	if [ ! -z "$A1PMS_IMAGE_SOURCE" ]; then
		echo -e "-- source image --\t$(docker images --format $1 $A1PMS_IMAGE_SOURCE)" >>   $2
	fi
}

# Scale kubernetes resources to zero
# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
# This function is called for apps fully managed by the test script
__A1PMS_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
}

# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
# This function is called for prestarted apps not managed by the test script.
__A1PMS_kube_scale_zero_and_wait() {
	__kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice
}

# Delete all kube resouces for the app
# This function is called for apps managed by the test script.
__A1PMS_kube_delete_all() {
	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
}

# Store docker logs
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prexix>
__A1PMS_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
		kubectl $KUBECONF  logs -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_a1pms.log 2>&1
	else
		docker logs $A1PMS_APP_NAME > $1$2_a1pms.log 2>&1
	fi
}

# Initial setup of protocol, host and ports
# This function is called for apps managed by the test script.
# args: -
__A1PMS_initial_setup() {
	use_a1pms_rest_http
	export A1PMS_SIDECAR_JWT_FILE=""
}

# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
# For docker, the namespace shall be excluded
# This function is called for apps managed by the test script as well as for prestarted apps.
# args: -
__A1PMS_statisics_setup() {
	if [ $RUNMODE == "KUBE" ]; then
		echo "A1PMS $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
	else
		echo "A1PMS $A1PMS_APP_NAME"
	fi
}

# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
# args: -
__A1PMS_test_requirements() {
	:
}


#######################################################

###########################
### A1PMSs functions
###########################

# Set http as the protocol to use for all communication to the A1PMS
# args: -
# (Function for test scripts)
use_a1pms_rest_http() {
	__a1pms_set_protocoll "http" $A1PMS_INTERNAL_PORT $A1PMS_EXTERNAL_PORT
}

# Set https as the protocol to use for all communication to the A1PMS
# args: -
# (Function for test scripts)
use_a1pms_rest_https() {
	__a1pms_set_protocoll "https" $A1PMS_INTERNAL_SECURE_PORT $A1PMS_EXTERNAL_SECURE_PORT
}

# All calls to the a1pms will be directed to the a1pms dmaap interface over http from now on
# args: -
# (Function for test scripts)
use_a1pms_dmaap_http() {
	echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
	A1PMS_ADAPTER_TYPE="MR-HTTP"
	echo ""
}

# All calls to the a1pms will be directed to the a1pms dmaap interface over https from now on
# args: -
# (Function for test scripts)
use_a1pms_dmaap_https() {
	echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
	echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
	echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW
	A1PMS_ADAPTER_TYPE="MR-HTTPS"
	echo ""
}

# Setup paths to svc/container for internal and external access
# args: <protocol> <internal-port> <external-port>
__a1pms_set_protocoll() {
	echo -e $BOLD"$A1PMS_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD $1 $EBOLD towards $A1PMS_DISPLAY_NAME"

	## Access to Dmaap adapter

	A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME":"$2  # docker access, container->container and script->container via proxy
	if [ $RUNMODE == "KUBE" ]; then
		A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
	fi

	# A1PMS_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
	A1PMS_ADAPTER_TYPE="REST"
	A1PMS_ADAPTER=$A1PMS_SERVICE_PATH

	echo ""
}

# Make curl retries towards the a1pms for http response codes set in this env var, space separated list of codes
A1PMS_RETRY_CODES=""

#Save first worker node the pod is started on
__A1PMS_WORKER_NODE=""

# Export env vars for config files, docker compose and kube resources
# args: PROXY|NOPROXY
__export_a1pms_vars() {

		export A1PMS_APP_NAME
		export A1PMS_APP_NAME_ALIAS
		export A1PMS_DISPLAY_NAME

		export KUBE_NONRTRIC_NAMESPACE
		export A1PMS_IMAGE
		export A1PMS_INTERNAL_PORT
		export A1PMS_INTERNAL_SECURE_PORT
		export A1PMS_EXTERNAL_PORT
		export A1PMS_EXTERNAL_SECURE_PORT
		export A1PMS_CONFIG_MOUNT_PATH
		export A1PMS_DATA_MOUNT_PATH
		export A1PMS_CONFIG_CONFIGMAP_NAME=$A1PMS_APP_NAME"-config"
		export A1PMS_DATA_CONFIGMAP_NAME=$A1PMS_APP_NAME"-data"
		export A1PMS_PKG_NAME
		export CONSUL_HOST
		export CONSUL_INTERNAL_PORT
		export CONFIG_BINDING_SERVICE
		export A1PMS_CONFIG_KEY
		export DOCKER_SIM_NWNAME
		export A1PMS_HOST_MNT_DIR
		export A1PMS_CONFIG_FILE

		export A1PMS_DATA_PV_NAME=$A1PMS_APP_NAME"-pv"
		export A1PMS_DATA_PVC_NAME=$A1PMS_APP_NAME"-pvc"
		##Create a unique path for the pv each time to prevent a previous volume to be reused
		export A1PMS_PV_PATH="a1pmsdata-"$(date +%s)
		export A1PMS_CONTAINER_MNT_DIR
		export HOST_PATH_BASE_DIR

		if [ $1 == "PROXY" ]; then
			export A1PMS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT  #Set if proxy is started
			export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
			if [ $A1PMS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$A1PMS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
				echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
			else
				echo " Configured with http proxy"
			fi
		else
			export A1PMS_HTTP_PROXY_CONFIG_PORT=0
			export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=""
			echo " Configured without http proxy"
		fi
}


# Start the ms
# args: (docker) PROXY|NOPROXY <config-file>
# args: (kube) PROXY|NOPROXY <config-file> [ <data-file>]
# (Function for test scripts)
start_a1pms() {
	echo -e $BOLD"Starting $A1PMS_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		# Check if app shall be fully managed by the test script
		__check_included_image "A1PMS"
		retcode_i=$?

		# Check if app shall only be used by the testscipt
		__check_prestarted_image "A1PMS"
		retcode_p=$?

		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
			echo -e $RED"The $A1PMS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
			echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
			exit
		fi
		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
			echo -e $RED"The $A1PMS_APP_NAME app is included both as managed and prestarted in this test script"$ERED
			echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
			exit
		fi

		if [ $retcode_p -eq 0 ]; then
			echo -e " Using existing $A1PMS_APP_NAME deployment and service"
			echo " Setting $A1PMS_APP_NAME replicas=1"
			res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
			__kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
		fi

		if [ $retcode_i -eq 0 ]; then

			echo -e " Creating $A1PMS_APP_NAME app and expose service"

			#Check if nonrtric namespace exists, if not create it
			__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

			__export_a1pms_vars $1

			# Create config map for config
			configfile=$PWD/tmp/$A1PMS_CONFIG_FILE
			cp $2 $configfile
			output_yaml=$PWD/tmp/a1pms-cfc.yaml
			__kube_create_configmap $A1PMS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $configfile $output_yaml

			# Create config map for data
			data_json=$PWD/tmp/$A1PMS_DATA_FILE
			if [ $# -lt 3 ]; then
				#create empty dummy file
				echo "{}" > $data_json
			else
				cp $3 $data_json
			fi
			output_yaml=$PWD/tmp/a1pms-cfd.yaml
			__kube_create_configmap $A1PMS_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml

			## Create pv
			input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pv.yaml
			output_yaml=$PWD/tmp/a1pms-pv.yaml
			__kube_create_instance pv $A1PMS_APP_NAME $input_yaml $output_yaml

			## Create pvc
			input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pvc.yaml
			output_yaml=$PWD/tmp/a1pms-pvc.yaml
			__kube_create_instance pvc $A1PMS_APP_NAME $input_yaml $output_yaml

			# Create service
			input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"svc.yaml
			output_yaml=$PWD/tmp/a1pmssvc.yaml
			__kube_create_instance service $A1PMS_APP_NAME $input_yaml $output_yaml

			# Create app
			input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"app.yaml
			output_yaml=$PWD/tmp/a1pmsapp.yaml
			if [ -z "$A1PMS_SIDECAR_JWT_FILE" ]; then
				cat $input_yaml | sed  '/#A1PMS_JWT_START/,/#A1PMS_JWT_STOP/d' > $PWD/tmp/a1pmsapp_tmp.yaml
				input_yaml=$PWD/tmp/a1pmsapp_tmp.yaml
			fi
			__kube_create_instance app $A1PMS_APP_NAME $input_yaml $output_yaml

		fi

		# Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host
		if [ $retcode_i -eq 0 ]; then
			__A1PMS_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}')
			if [ -z "$__A1PMS_WORKER_NODE" ]; then
				echo -e $YELLOW" Cannot find worker node for pod for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
			fi
		else
			echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
		fi

		__check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL

	else
		__check_included_image 'A1PMS'
		if [ $? -eq 1 ]; then
			echo -e $RED"The A1PMS app is not included in this test script"$ERED
			echo -e $RED"The A1PMS will not be started"$ERED
			exit
		fi

		curdir=$PWD
		cd $SIM_GROUP
		cd a1pms
		cd $A1PMS_HOST_MNT_DIR
		#cd ..
		if [ -d db ]; then
			if [ "$(ls -A $DIR)" ]; then
				echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD
				rm -rf db/*  &> /dev/null
				if [ $? -ne 0 ]; then
					echo -e $RED" Cannot remove database files in: $PWD"$ERED
					exit 1
				fi
			fi
		else
			echo " No files in mounted dir or dir does not exists"
			mkdir db
		fi
		cd $curdir

		__export_a1pms_vars $1

		dest_file=$SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_HOST_MNT_DIR/application.yaml

		envsubst < $2 > $dest_file

		__start_container $A1PMS_COMPOSE_DIR "" NODOCKERARGS 1 $A1PMS_APP_NAME

		__check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
	fi

	__collect_endpoint_stats_image_info "A1PMS" $A1PMS_IMAGE
	echo ""
	return 0
}

# Stop the a1pms
# args: -
# args: -
# (Function for test scripts)
stop_a1pms() {
	echo -e $BOLD"Stopping $A1PMS_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		__check_prestarted_image "A1PMS"
		if [ $? -eq 0 ]; then
			echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
			res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
			__kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0
			return 0
		fi
		__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
		echo "  Deleting the replica set - a new will be started when the app is started"
		tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA")
		if [ $? -ne 0 ]; then
			echo -e $RED" Could not delete replica set "$RED
			((RES_CONF_FAIL++))
			return 1
		fi
	else
		docker stop $A1PMS_APP_NAME &> ./tmp/.dockererr
		if [ $? -ne 0 ]; then
			__print_err "Could not stop $A1PMS_APP_NAME" $@
			cat ./tmp/.dockererr
			((RES_CONF_FAIL++))
			return 1
		fi
	fi
	echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
	echo ""
	return 0
}

# Start a previously stopped a1pms
# args: -
# (Function for test scripts)
start_stopped_a1pms() {
	echo -e $BOLD"Starting (the previously stopped) $A1PMS_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		__check_prestarted_image "A1PMS"
		if [ $? -eq 0 ]; then
			echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
			res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
			__kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
			__check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
			return 0
		fi

		# Tie the A1PMS to the same worker node it was initially started on
		# A PVC of type hostPath is mounted to A1PMS, for persistent storage, so the A1PMS must always be on the node which mounted the volume
		if [ -z "$__A1PMS_WORKER_NODE" ]; then
			echo -e $RED" No initial worker node found for pod "$RED
			((RES_CONF_FAIL++))
			return 1
		else
			echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__A1PMS_WORKER_NODE to deployment for $A1PMS_APP_NAME. Pod will always run on this worker node: $__A1PMS_WORKER_NODE"$BOLD
			echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD
			tmp=$(kubectl $KUBECONF patch deployment $A1PMS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__A1PMS_WORKER_NODE'"}}}}}')
			if [ $? -ne 0 ]; then
				echo -e $YELLOW" Cannot set nodeSelector to deployment for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
			fi
			__kube_scale deployment $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
		fi
	else
		docker start $A1PMS_APP_NAME &> ./tmp/.dockererr
		if [ $? -ne 0 ]; then
			__print_err "Could not start (the stopped) $A1PMS_APP_NAME" $@
			cat ./tmp/.dockererr
			((RES_CONF_FAIL++))
			return 1
		fi
	fi
	__check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
	if [ $? -ne 0 ]; then
		return 1
	fi
	echo ""
	return 0
}


# Function to perpare the consul configuration according to the current simulator configuration
# args: SDNC|NOSDNC <output-file> HEADER|NOHEADER
# (Function for test scripts)
prepare_consul_config() {
  	echo -e $BOLD"Prepare Consul config"$EBOLD

	echo " Writing consul config for "$A1PMS_APP_NAME" to file: "$2

	if [ $# != 3 ];  then
		((RES_CONF_FAIL++))
    	__print_err "need two args,  SDNC|NOSDNC <output-file> HEADER|NOHEADER" $@
		exit 1
	fi

	if [ $1 == "SDNC" ]; then
		echo -e " Config$BOLD including SDNC$EBOLD configuration"
	elif [ $1 == "NOSDNC" ];  then
		echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
	else
		((RES_CONF_FAIL++))
    	__print_err "need three args,  SDNC|NOSDNC <output-file> HEADER|NOHEADER" $@
		exit 1
	fi

	config_json="\n            {"
	if [ $1 == "SDNC" ]; then
		config_json=$config_json"\n   \"controller\": ["
		config_json=$config_json"\n                     {"
		config_json=$config_json"\n                       \"name\": \"$SDNC_APP_NAME\","
		config_json=$config_json"\n                       \"baseUrl\": \"$SDNC_SERVICE_PATH\","
		config_json=$config_json"\n                       \"userName\": \"$SDNC_USER\","
		config_json=$config_json"\n                       \"password\": \"$SDNC_PWD\""
		config_json=$config_json"\n                     }"
		config_json=$config_json"\n   ],"
	fi

	config_json=$config_json"\n   \"streams_publishes\": {"
	config_json=$config_json"\n                            \"dmaap_publisher\": {"
	config_json=$config_json"\n                              \"type\": \"message-router\","
	config_json=$config_json"\n                              \"dmaap_info\": {"
	config_json=$config_json"\n                                \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\""
	config_json=$config_json"\n                              }"
	config_json=$config_json"\n                            }"
	config_json=$config_json"\n   },"
	config_json=$config_json"\n   \"streams_subscribes\": {"
	config_json=$config_json"\n                             \"dmaap_subscriber\": {"
	config_json=$config_json"\n                               \"type\": \"message-router\","
	config_json=$config_json"\n                               \"dmaap_info\": {"
	config_json=$config_json"\n                                   \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\""
	config_json=$config_json"\n                                 }"
	config_json=$config_json"\n                               }"
	config_json=$config_json"\n   },"

	config_json=$config_json"\n   \"ric\": ["

	if [ $RUNMODE == "KUBE" ]; then
		result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}')
		rics=""
		ric_cntr=0
		if [ $? -eq 0 ] && [ ! -z "$result" ]; then
			for im in $result; do
				if [[ $im != *"-0" ]]; then
					ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
					rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
					let ric_cntr=ric_cntr+1
				fi
			done
		fi
		if [ $ric_cntr -eq 0 ]; then
			echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW
		fi
	else
		rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "status=running" --format {{.Names}})
		if [ $? -ne 0 ] || [ -z "$rics" ]; then
			echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
			((RES_CONF_FAIL++))
			return 1
		fi
	fi
	cntr=0
	for ric in $rics; do
		if [ $cntr -gt 0 ]; then
			config_json=$config_json"\n          ,"
		fi
		config_json=$config_json"\n          {"
		if [ $RUNMODE == "KUBE" ]; then
			ric_id=${ric%.*.*} #extract pod id from full hosthame
			ric_id=$(echo "$ric_id" | tr '-' '_')
		else
			if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
				ric_id=$ric
			else
				ric_id=$(echo "$ric" | tr '-' '_')  #ric id still needs underscore as it is different from the container name
			fi
		fi
		echo " Found a1 sim: "$ric_id
		config_json=$config_json"\n            \"name\": \"$ric_id\","
		config_json=$config_json"\n            \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
		if [ $1 == "SDNC" ]; then
			config_json=$config_json"\n            \"controller\": \"$SDNC_APP_NAME\","
		fi
		config_json=$config_json"\n            \"managedElementIds\": ["
		config_json=$config_json"\n              \"me1_$ric_id\","
		config_json=$config_json"\n              \"me2_$ric_id\""
		config_json=$config_json"\n            ]"
		config_json=$config_json"\n          }"
		let cntr=cntr+1
	done

	config_json=$config_json"\n           ]"
	config_json=$config_json"\n}"

	if [ $3 == "HEADER" ]; then
		config_json="{\"config\":"$config_json"}"
	fi

	printf "$config_json">$2

	echo ""
}

# Load the the appl config for the a1pms into a config map
a1pms_load_config() {
	echo -e $BOLD"A1PMS - load config from "$EBOLD$1
	data_json=$PWD/tmp/$A1PMS_DATA_FILE
	cp $1 $data_json
	output_yaml=$PWD/tmp/a1pms-cfd.yaml
	__kube_create_configmap $A1PMS_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml
	echo ""
}


# Turn on debug level tracing in the a1pms
# args: -
# (Function for test scripts)
set_a1pms_debug() {
	echo -e $BOLD"Setting a1pms debug logging"$EBOLD
	curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST  -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
	result=$(__do_curl "$curlString")
	if [ $? -ne 0 ]; then
		__print_err "could not set debug mode" $@
		((RES_CONF_FAIL++))
		return 1
	fi
	echo ""
	return 0
}

# Turn on trace level tracing in the a1pms
# args: -
# (Function for test scripts)
set_a1pms_trace() {
	echo -e $BOLD"Setting a1pms trace logging"$EBOLD
	curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST  -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
	result=$(__do_curl "$curlString")
	if [ $? -ne 0 ]; then
		__print_err "could not set trace mode" $@
		((RES_CONF_FAIL++))
		return 1
	fi
	echo ""
	return 0
}

# Perform curl retries when making direct call to the a1pms for the specified http response codes
# Speace separated list of http response codes
# args: [<response-code>]*
use_a1pms_retries() {
	echo -e $BOLD"Do curl retries to the a1pms REST inteface for these response codes:$@"$EBOLD
	AGENT_RETRY_CODES=$@
	echo ""
	return
}

# Check the a1pms logs for WARNINGs and ERRORs
# args: -
# (Function for test scripts)
check_a1pms_logs() {
	__check_container_logs "A1PMS" $A1PMS_APP_NAME $A1PMS_LOGPATH WARN ERR
}

#########################################################
#### Test case functions A1 Policy management service
#########################################################

# This function compare the size, towards a target value, of a json array returned from <url> of the A1PMS.
# This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
# args: json:<url> <target-value> [<timeout-in-seconds]
# (Function for test scripts)
a1pms_equal() {
    echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
	if [ $# -eq 2 ] || [ $# -eq 3 ]; then
		if [[ $1 == "json:"* ]]; then
			if [ "$A1PMS_VERSION" == "V2" ]; then
				__var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v2/" $1 "=" $2 $3
			else
				__var_test "A1PMS" $A1PMS_SERVICE_PATH"/" $1 "=" $2 $3
			fi
			return 0
		fi
	fi
	__print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
	return 1
}

# API Test function: GET /policies and V2 GET /v2/policy-instances
# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
# args(V2): <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]
# (Function for test scripts)
a1pms_api_get_policies() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		paramError=0
		variableParams=$(($#-4))
		if [ $# -lt 4 ]; then
			paramError=1
		elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
			paramError=1
		elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then
			paramError=1
		fi

		if [ $paramError -ne 0 ]; then
			__print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]" $@
			return 1
		fi
	else
		paramError=0
		variableParams=$(($#-4))
		if [ $# -lt 4 ]; then
			paramError=1
		elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
			paramError=1
		elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then
			paramError=1
		fi

		if [ $paramError -ne 0 ]; then
			__print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
			return 1
		fi
	fi

	queryparams=""
	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $2 != "NORIC" ]; then
			queryparams="?ric_id="$2
		fi
		if [ $3 != "NOSERVICE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?service_id="$3
			else
				queryparams=$queryparams"&service_id="$3
			fi
		fi
		if [ $4 != "NOTYPE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?policytype_id="$4
			else
				queryparams=$queryparams"&policytype_id="$4
			fi
		fi

		query="/v2/policy-instances"$queryparams
		res="$(__do_curl_to_api A1PMS GET $query)"
		status=${res:${#res}-3}

		if [ $status -ne $1 ]; then
			__log_test_fail_status_code $1 $status
			return 1
		fi

		if [ $# -gt 4 ]; then
			body=${res:0:${#res}-3}
			if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
				targetJson="["
			else
				targetJson="["
				arr=(${@:5})

				for ((i=0; i<$(($#-4)); i=i+7)); do

					if [ "$targetJson" != "[" ]; then
						targetJson=$targetJson","
					fi
					targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":"
					if [ "${arr[$i+3]}" == "EMPTY" ]; then
						targetJson=$targetJson"\"\","
					else
						targetJson=$targetJson"\"${arr[$i+3]}\","
					fi
					targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\","
					file="./tmp/.p.json"
					sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file
					json=$(cat $file)
					targetJson=$targetJson"\"policy_data\":"$json"}"
				done
			fi

			targetJson=$targetJson"]"
			targetJson="{\"policies\": $targetJson}"
			echo "TARGET JSON: $targetJson" >> $HTTPLOG
			res=$(python3 ../common/compare_json.py "$targetJson" "$body")

			if [ $res -ne 0 ]; then
				__log_test_fail_body
				return 1
			fi
		fi
	else
		if [ $2 != "NORIC" ]; then
			queryparams="?ric="$2
		fi
		if [ $3 != "NOSERVICE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?service="$3
			else
				queryparams=$queryparams"&service="$3
			fi
		fi
		if [ $4 != "NOTYPE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?type="$4
			else
				queryparams=$queryparams"&type="$4
			fi
		fi

		query="/policies"$queryparams
		res="$(__do_curl_to_api A1PMS GET $query)"
		status=${res:${#res}-3}

		if [ $status -ne $1 ]; then
			__log_test_fail_status_code $1 $status
			return 1
		fi

		if [ $# -gt 4 ]; then
			if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
				targetJson="["
			else
				body=${res:0:${#res}-3}
				targetJson="["
				arr=(${@:5})

				for ((i=0; i<$(($#-4)); i=i+5)); do

					if [ "$targetJson" != "[" ]; then
						targetJson=$targetJson","
					fi
					targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
					if [ "${arr[$i+3]}" == "EMPTY" ]; then
						targetJson=$targetJson"\"\","
					else
						targetJson=$targetJson"\"${arr[$i+3]}\","
					fi
					file="./tmp/.p.json"
					sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
					json=$(cat $file)
					targetJson=$targetJson"\"json\":"$json"}"
				done
			fi

			targetJson=$targetJson"]"
			echo "TARGET JSON: $targetJson" >> $HTTPLOG
			res=$(python3 ../common/compare_json.py "$targetJson" "$body")

			if [ $res -ne 0 ]; then
				__log_test_fail_body
				return 1
			fi
		fi
	fi
	__collect_endpoint_stats "A1PMS" 00 "GET" $A1PMS_API_PREFIX"/v2/policy-instances" $status
	__log_test_pass
	return 0

}


# API Test function: GET /policy and V2 GET /v2/policies/{policy_id}
# args: <response-code>  <policy-id> [<template-file>]
# args(V2): <response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]

# (Function for test scripts)
a1pms_api_get_policy() {
	__log_test_start $@


	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -ne 2 ] && [ $# -ne 8 ]; then
			__print_err "<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]" $@
			return 1
		fi
		query="/v2/policies/$UUID$2"
	else
		if [ $# -lt 2 ] || [ $# -gt 3 ]; then
			__print_err "<response-code>  <policy-id> [<template-file>] " $@
			return 1
		fi
		query="/policy?id=$UUID$2"
	fi
	res="$(__do_curl_to_api A1PMS GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -eq 8 ]; then

			#Create a policy json to compare with
			body=${res:0:${#res}-3}

			targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\""
			if [ $7 != "NOTRANSIENT" ]; then
				targetJson=$targetJson", \"transient\":$7"
			fi
			if [ $6 != "NOTYPE" ]; then
				targetJson=$targetJson", \"policytype_id\":\"$6\""
			else
				targetJson=$targetJson", \"policytype_id\":\"\""
			fi
			if [ $8 != "NOURL" ]; then
				targetJson=$targetJson", \"status_notification_uri\":\"$8\""
			fi

			data=$(sed 's/XXX/'${2}'/g' $3)
			targetJson=$targetJson", \"policy_data\":$data"
			targetJson="{$targetJson}"

			echo "TARGET JSON: $targetJson" >> $HTTPLOG
			res=$(python3 ../common/compare_json.py "$targetJson" "$body")
			if [ $res -ne 0 ]; then
				__log_test_fail_body
				return 1
			fi
		fi
	else
		if [ $# -eq 3 ]; then
			#Create a policy json to compare with
			body=${res:0:${#res}-3}
			file="./tmp/.p.json"
			sed 's/XXX/'${2}'/g' $3 > $file
			targetJson=$(< $file)
			echo "TARGET JSON: $targetJson" >> $HTTPLOG
			res=$(python3 ../common/compare_json.py "$targetJson" "$body")
			if [ $res -ne 0 ]; then
				__log_test_fail_body
			fi
		fi
	fi

	__collect_endpoint_stats "A1PMS" 01 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status
	__log_test_pass
	return 0
}

# API Test function: PUT /policy and V2 PUT /policies
# args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]
# args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]
# (Function for test scripts)
a1pms_api_put_policy() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -lt 8 ] || [ $# -gt 9 ]; then
			__print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]" $@
			return 1
		fi
	else
		if [ $# -lt 7 ] || [ $# -gt 8 ]; then
			__print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@
			return 1
		fi
	fi

	count=0
	max=1
	serv=$2
	ric=$3
	pt=$4
	pid=$5
	trans=$6

	if [ "$A1PMS_VERSION" == "V2" ]; then
		noti=$7
		temp=$8
		if [ $# -eq 9 ]; then
			max=$9
		fi
	else
		temp=$7
		if [ $# -eq 8 ]; then
			max=$8
		fi
	fi

	while [ $count -lt $max ]; do
		if [ "$A1PMS_VERSION" == "V2" ]; then

			query="/v2/policies"

			inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
			if [ $trans != "NOTRANSIENT" ]; then
				inputJson=$inputJson", \"transient\":$trans"
			fi
			if [ $pt != "NOTYPE" ]; then
				inputJson=$inputJson", \"policytype_id\":\"$pt\""
			else
				inputJson=$inputJson", \"policytype_id\":\"\""
			fi
			if [ $noti != "NOURL" ]; then
				inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
			fi
			file="./tmp/.p.json"
			data=$(sed 's/XXX/'${pid}'/g' $temp)
			inputJson=$inputJson", \"policy_data\":$data"
			inputJson="{$inputJson}"
			echo $inputJson > $file
		else
			query="/policy?id=$UUID$pid&ric=$ric&service=$serv"

			if [ $pt != "NOTYPE" ]; then
				query=$query"&type=$pt"
			fi

			if [ $trans != NOTRANSIENT ]; then
				query=$query"&transient=$trans"
			fi

			file="./tmp/.p.json"
			sed 's/XXX/'${pid}'/g' $temp > $file
		fi
    	res="$(__do_curl_to_api A1PMS PUT $query $file)"
    	status=${res:${#res}-3}
		echo -ne " Executing "$count"("$max")${SAMELINE}"
		if [ $status -ne $1 ]; then
			echo " Executed "$count"?("$max")"
			__log_test_fail_status_code $1 $status
			return 1
		fi
		let pid=$pid+1
		let count=$count+1
		echo -ne " Executed  "$count"("$max")${SAMELINE}"
	done
	__collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $status $max
	echo ""

	__log_test_pass
	return 0
}

# API Test function: PUT /policy and V2 PUT /policies, to run in batch
# args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]
# args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]
# (Function for test scripts)

a1pms_api_put_policy_batch() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -lt 8 ] || [ $# -gt 9 ]; then
			__print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]" $@
			return 1
		fi
	else
		if [ $# -lt 7 ] || [ $# -gt 8 ]; then
			__print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]" $@
			return 1
		fi
	fi

	count=0
	max=1
	serv=$2
	ric=$3
	pt=$4
	pid=$5
	trans=$6
	if [ "$A1PMS_VERSION" == "V2" ]; then
		noti=$7
		temp=$8
		if [ $# -eq 9 ]; then
			max=$9
		fi
	else
		temp=$7
		if [ $# -eq 8 ]; then
			max=$8
		fi
	fi

	ARR=""
	while [ $count -lt $max ]; do
		if [ "$A1PMS_VERSION" == "V2" ]; then
			query="/v2/policies"

			inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
			if [ $trans != "NOTRANSIENT" ]; then
				inputJson=$inputJson", \"transient\":$trans"
			fi
			if [ $pt != "NOTYPE" ]; then
				inputJson=$inputJson", \"policytype_id\":\"$pt\""
			else
				inputJson=$inputJson", \"policytype_id\":\"\""
			fi
			if [ $noti != "NOURL" ]; then
				inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
			fi
			file="./tmp/.p.json"
			data=$(sed 's/XXX/'${pid}'/g' $temp)
			inputJson=$inputJson", \"policy_data\":$data"
			inputJson="{$inputJson}"
			echo $inputJson > $file
		else
			query="/policy?id=$UUID$pid&ric=$ric&service=$serv"

			if [ $pt != "NOTYPE" ]; then
				query=$query"&type=$pt"
			fi

			if [ $trans != NOTRANSIENT ]; then
				query=$query"&transient=$trans"
			fi
			file="./tmp/.p.json"
			sed 's/XXX/'${pid}'/g' $temp > $file
		fi
    	res="$(__do_curl_to_api A1PMS PUT_BATCH $query $file)"
    	status=${res:${#res}-3}
		echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"

		if [ $status -ne 200 ]; then
			echo " Requested(batch) "$count"?("$max")"
			__log_test_fail_status_code 200 $status
			return 1
		fi
		cid=${res:0:${#res}-3}
		ARR=$ARR" "$cid
		let pid=$pid+1
		let count=$count+1
		echo -ne " Requested(batch)  "$count"("$max")${SAMELINE}"
	done

	echo ""
	count=0
	for cid in $ARR; do

    	res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
    	status=${res:${#res}-3}
		echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}"

		if [ $status -ne $1 ]; then
			echo " Accepted(batch) "$count"?("$max")"
			__log_test_fail_status_code $1 $status
			return 1
		fi

		let count=$count+1
		echo -ne " Accepted(batch)  "$count"("$max")${SAMELINE}"
	done
	__collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $1 $max

	echo ""

	__log_test_pass
	return 0
}

# API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics
# args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
# args(V2): <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>
# (Function for test scripts)
a1pms_api_put_policy_parallel() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -ne 11 ]; then
			__print_err "<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>" $@
			return 1
		fi
	else
		if [ $# -ne 10 ]; then
			__print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@
			return 1
		fi
	fi
	resp_code=$1; shift;
	serv=$1; shift
	ric_base=$1; shift;
	num_rics=$1; shift;
	type=$1; shift;
	start_id=$1; shift;
	transient=$1; shift;
	if [ "$A1PMS_VERSION" == "V2" ]; then
		noti=$1; shift;
	else
		noti=""
	fi
	template=$1; shift;
	count=$1; shift;
	pids=$1; shift;

	#if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
	if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
		echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
		echo " Info - will execute over a1pms REST"
	fi
	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $serv == "NOSERVICE" ]; then
			serv=""
		fi
		query="$A1PMS_API_PREFIX/v2/policies"
	else
		if [ $serv == "NOSERVICE" ]; then
			serv=""
		fi
		query="/policy?service=$serv"

		if [ $type != "NOTYPE" ]; then
			query=$query"&type=$type"
		fi

		if [ $transient != NOTRANSIENT ]; then
			query=$query"&transient=$transient"
		fi
	fi

	urlbase=${A1PMS_ADAPTER}${query}

	httpproxy="NOPROXY"
	if [ ! -z "$KUBE_PROXY_PATH" ]; then
		httpproxy=$KUBE_PROXY_PATH
	fi

	for ((i=1; i<=$pids; i++))
	do
		uuid=$UUID
		if [ -z "$uuid" ]; then
			uuid="NOUUID"
		fi
		echo "" > "./tmp/.pid${i}.res.txt"
		if [ "$A1PMS_VERSION" == "V2" ]; then
			echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
		else
			echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
		fi
		echo $i
	done  | xargs -n 1 -I{} -P $pids bash -c '{
		arg=$(echo {})
		echo " Parallel process $arg started"
		tmp=$(< "./tmp/.pid${arg}.txt")
		python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt
	}'
	msg=""
	for ((i=1; i<=$pids; i++))
	do
		file="./tmp/.pid${i}.res.txt"
		tmp=$(< $file)
		if [ -z "$tmp" ]; then
			echo " Process $i : unknown result (result file empty"
			msg="failed"
		else
			res=${tmp:0:1}
			if [ $res == "0" ]; then
				echo " Process $i : OK - "${tmp:1}
			else
				echo " Process $i : failed - "${tmp:1}
				msg="failed"
			fi
		fi
	done
	if [ -z $msg ]; then
		__collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $resp_code $(($count*$num_rics))
		__log_test_pass " $(($count*$num_rics)) policy request(s) executed"
		return 0
	fi

	__log_test_fail_general "One of more processes failed to execute"
	return 1
}

# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}
# args: <response-code> <policy-id> [count]
# (Function for test scripts)
a1pms_api_delete_policy() {
	__log_test_start $@

    if [ $# -lt 2 ] || [ $# -gt 3 ]; then
        __print_err "<response-code> <policy-id> [count]" $@
        return 1
    fi

	count=0
	max=1

	if [ $# -eq 3 ]; then
		max=$3
	fi

	pid=$2

	while [ $count -lt $max ]; do
		if [ "$A1PMS_VERSION" == "V2" ]; then
			query="/v2/policies/"$UUID$pid
		else
			query="/policy?id="$UUID$pid
		fi
		res="$(__do_curl_to_api A1PMS DELETE $query)"
		status=${res:${#res}-3}
		echo -ne " Executing "$count"("$max")${SAMELINE}"

		if [ $status -ne $1 ]; then
			echo " Executed "$count"?("$max")"
			__log_test_fail_status_code $1 $status
			return 1
		fi

		let pid=$pid+1
		let count=$count+1
		echo -ne " Executed  "$count"("$max")${SAMELINE}"
	done
	__collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status $max
	echo ""

	__log_test_pass
	return 0
}

# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch
# args: <response-code> <policy-id> [count]
# (Function for test scripts)
a1pms_api_delete_policy_batch() {
	__log_test_start $@

    if [ $# -lt 2 ] || [ $# -gt 3 ]; then
        __print_err "<response-code> <policy-id> [count]" $@
        return 1
    fi

	count=0
	max=1

	if [ $# -eq 3 ]; then
		max=$3
	fi

	pid=$2
	ARR=""
	while [ $count -lt $max ]; do
		if [ "$A1PMS_VERSION" == "V2" ]; then
			query="/v2/policies/"$UUID$pid
		else
			query="/policy?id="$UUID$pid
		fi
		res="$(__do_curl_to_api A1PMS DELETE_BATCH $query)"
		status=${res:${#res}-3}
		echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"

		if [ $status -ne 200 ]; then
			echo " Requested(batch) "$count"?("$max")"
			__log_test_fail_status_code 200 $status
			return 1
		fi
		cid=${res:0:${#res}-3}
		ARR=$ARR" "$cid
		let pid=$pid+1
		let count=$count+1
		echo -ne " Requested(batch)  "$count"("$max")${SAMELINE}"
	done

	echo ""

	count=0
	for cid in $ARR; do

    	res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
    	status=${res:${#res}-3}
		echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}"

		if [ $status -ne $1 ]; then
			echo " Deleted(batch) "$count"?("$max")"
			__log_test_fail_status_code $1 $status
			return 1
		fi

		let count=$count+1
		echo -ne " Deleted(batch)  "$count"("$max")${SAMELINE}"
	done
	__collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max

	echo ""

	__log_test_pass
	return 0
}

# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics
# args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
# (Function for test scripts)
a1pms_api_delete_policy_parallel() {
	__log_test_start $@

    if [ $# -ne 5 ]; then
        __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@
        return 1
    fi
	resp_code=$1; shift;
	num_rics=$1; shift;
	start_id=$1; shift;
	count=$1; shift;
	pids=$1; shift;

	#if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
	if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
		echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
		echo " Info - will execute over a1pms REST"
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="$A1PMS_API_PREFIX/v2/policies/"
	else
		query="/policy"
	fi

	urlbase=${A1PMS_ADAPTER}${query}

	httpproxy="NOPROXY"
	if [ ! -z "$KUBE_PROXY_PATH" ]; then
		httpproxy=$KUBE_PROXY_PATH
	fi

	for ((i=1; i<=$pids; i++))
	do
		uuid=$UUID
		if [ -z "$uuid" ]; then
			uuid="NOUUID"
		fi
		echo "" > "./tmp/.pid${i}.del.res.txt"
		echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy> "./tmp/.pid${i}.del.txt"
		echo $i
	done  | xargs -n 1 -I{} -P $pids bash -c '{
		arg=$(echo {})
		echo " Parallel process $arg started"
		tmp=$(< "./tmp/.pid${arg}.del.txt")
		python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt
	}'
	msg=""
	for ((i=1; i<=$pids; i++))
	do
		file="./tmp/.pid${i}.del.res.txt"
		tmp=$(< $file)
		if [ -z "$tmp" ]; then
			echo " Process $i : unknown result (result file empty"
			msg="failed"
		else
			res=${tmp:0:1}
			if [ $res == "0" ]; then
				echo " Process $i : OK - "${tmp:1}
			else
				echo " Process $i : failed - "${tmp:1}
				msg="failed"
			fi
		fi
	done
	if [ -z $msg ]; then
		__collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count*$num_rics))
		__log_test_pass " $(($count*$num_rics)) policy request(s) executed"
		return 0
	fi

	__log_test_fail_general "One of more processes failed to execute"
	return 1
}

# API Test function: GET /policy_ids and V2 GET /v2/policies
# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
# (Function for test scripts)
a1pms_api_get_policy_ids() {
	__log_test_start $@

    if [ $# -lt 4 ]; then
		__print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
		return 1
	fi

	queryparams=""

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $2 != "NORIC" ]; then
			queryparams="?ric_id="$2
		fi

		if [ $3 != "NOSERVICE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?service_id="$3
			else
				queryparams=$queryparams"&service_id="$3
			fi
		fi
		if [ $4 != "NOTYPE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?policytype_id="$4
			else
				queryparams=$queryparams"&policytype_id="$4
			fi
		fi

		query="/v2/policies"$queryparams
	else
		if [ $2 != "NORIC" ]; then
			queryparams="?ric="$2
		fi

		if [ $3 != "NOSERVICE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?service="$3
			else
				queryparams=$queryparams"&service="$3
			fi
		fi
		if [ $4 != "NOTYPE" ]; then
			if [ -z $queryparams ]; then
				queryparams="?type="$4
			else
				queryparams=$queryparams"&type="$4
			fi
		fi

		query="/policy_ids"$queryparams
	fi

    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -gt 4 ]; then
		body=${res:0:${#res}-3}
		targetJson="["

		for pid in ${@:5} ; do
			if [ "$targetJson" != "[" ]; then
				targetJson=$targetJson","
			fi
			if [ $pid != "NOID" ]; then
				targetJson=$targetJson"\"$UUID$pid\""
			fi
		done

		targetJson=$targetJson"]"
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson="{\"policy_ids\": $targetJson}"
		fi
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies" $status
	__log_test_pass
	return 0
}

# API Test function: V2 GET /v2/policy-types/{policyTypeId}
# args(V2): <response-code> <policy-type-id> [<schema-file>]
# (Function for test scripts)
a1pms_api_get_policy_type() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" != "V2" ]; then
		__log_test_fail_not_supported
		return 1
	fi

    if [ $# -lt 2 ] || [ $# -gt 3 ]; then
        __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
        return 1
    fi
	query="/v2/policy-types/$2"

	res="$(__do_curl_to_api A1PMS GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -eq 3 ]; then

		body=${res:0:${#res}-3}

		targetJson=$(< $3)
		targetJson="{\"policy_schema\":$targetJson}"
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 05 "GET" $A1PMS_API_PREFIX"/v2/policy-types/{policyTypeId}" $status
	__log_test_pass
	return 0
}

# API Test function: GET /policy_schema
# args: <response-code> <policy-type-id> [<schema-file>]
# (Function for test scripts)
a1pms_api_get_policy_schema() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		__log_test_fail_not_supported
		return 1
	fi

    if [ $# -lt 2 ] || [ $# -gt 3 ]; then
        __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
        return 1
    fi
	query="/policy_schema?id=$2"
	res="$(__do_curl_to_api A1PMS GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -eq 3 ]; then

		body=${res:0:${#res}-3}

		targetJson=$(< $3)

		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 06 "GET" $A1PMS_API_PREFIX"/v2/policy_schema" $status
	__log_test_pass
	return 0
}

# API Test function: GET /policy_schemas
# args: <response-code>  <ric-id>|NORIC [<schema-file>|NOFILE]*
# args(V2): <response-code>
# (Function for test scripts)
a1pms_api_get_policy_schemas() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -ne 1 ]; then
			__print_err "<response-code>" $@
			return 1
		fi
	else
		if [ $# -lt 2 ]; then
			__print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
			return 1
		fi
	fi
	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/policy-schemas"
	else
		query="/policy_schemas"
		if [ $2 != "NORIC" ]; then
			query=$query"?ric="$2
		fi
	fi

	res="$(__do_curl_to_api A1PMS GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -gt 2 ]; then
		body=${res:0:${#res}-3}
		targetJson="["

		for file in ${@:3} ; do
			if [ "$targetJson" != "[" ]; then
				targetJson=$targetJson","
			fi
			if [ $file == "NOFILE" ]; then
				targetJson=$targetJson"{}"
			else
				targetJson=$targetJson$(< $file)
			fi
		done

		targetJson=$targetJson"]"
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson="{\"policy_schemas\": $targetJson }"
		fi
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 07 "GET" $A1PMS_API_PREFIX"/v2/policy-schemas" $status
	__log_test_pass
	return 0
}

# API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status
# arg: <response-code> <policy-id> [ (STD|STD2 <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>) ]
# (Function for test scripts)
a1pms_api_get_policy_status() {
	__log_test_start $@

    if [ $# -lt 2 ] || [ $# -gt 5 ]; then
		__print_err "<response-code> <policy-id> [(STD <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>)]" $@
		return 1
	fi

	targetJson=""
	if [ $# -eq 2 ]; then
		:
	elif [ "$3" == "STD" ]; then
		targetJson="{\"enforceStatus\":\"$4\""
		if [ $# -eq 5 ]; then
			targetJson=$targetJson",\"reason\":\"$5\""
		fi
		targetJson=$targetJson"}"
	elif [ "$3" == "STD2" ]; then
		if [ $4 == "EMPTY" ]; then
			targetJson="{\"enforceStatus\":\"\""
		else
			targetJson="{\"enforceStatus\":\"$4\""
		fi
		if [ $# -eq 5 ]; then
			if [ $5 == "EMPTY" ]; then
				targetJson=$targetJson",\"enforceReason\":\"\""
			else
				targetJson=$targetJson",\"enforceReason\":\"$5\""
			fi
		fi
		targetJson=$targetJson"}"
	elif [ "$3" == "OSC" ]; then
		targetJson="{\"instance_status\":\"$4\""
		if [ $# -eq 5 ]; then
			targetJson=$targetJson",\"has_been_deleted\":\"$5\""
		fi
		targetJson=$targetJson",\"created_at\":\"????\"}"
	else
		__print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/policies/$UUID$2/status"
		targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}"
	else
		query="/policy_status?id="$UUID$2
	fi

	res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi
	if [ $# -gt 2 ]; then
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		body=${res:0:${#res}-3}
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi
	__collect_endpoint_stats "A1PMS" 08 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status
	__log_test_pass
	return 0
}

# API Test function: GET /policy_types and V2 GET /v2/policy-types
# args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
# (Function for test scripts)
a1pms_api_get_policy_types() {
	__log_test_start $@

    if [ $# -lt 1 ]; then
		__print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -eq 1 ]; then
			query="/v2/policy-types"
		elif [ $2 == "NORIC" ]; then
			query="/v2/policy-types"
		else
			query="/v2/policy-types?ric_id=$2"
		fi
	else
		if [ $# -eq 1 ]; then
			query="/policy_types"
		elif [ $2 == "NORIC" ]; then
			query="/policy_types"
		else
			query="/policy_types?ric=$2"
		fi
	fi

    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -gt 2 ]; then
		body=${res:0:${#res}-3}
		targetJson="["

		for pid in ${@:3} ; do
			if [ "$targetJson" != "[" ]; then
				targetJson=$targetJson","
			fi
			if [ $pid == "EMPTY" ]; then
				pid=""
			fi
			targetJson=$targetJson"\"$pid\""
		done

		targetJson=$targetJson"]"
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson="{\"policytype_ids\": $targetJson }"
		fi
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 09 "GET" $A1PMS_API_PREFIX"/v2/policy-types" $status
	__log_test_pass
	return 0
}

#########################################################
#### Test case functions Health check
#########################################################

# API Test function: GET /status and V2 GET /status
# args: <response-code>
# (Function for test scripts)
a1pms_api_get_status() {
	__log_test_start $@
    if [ $# -ne 1 ]; then
		__print_err "<response-code>" $@
		return 1
	fi
	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/status"
	else
		query="/status"
	fi
    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 10 "GET" $A1PMS_API_PREFIX"/v2/status" $status
	__log_test_pass
	return 0
}

# API Test function: GET /status (root) without api prefix
# args: <response-code>
# (Function for test scripts)
a1pms_api_get_status_root() {
	__log_test_start $@
    if [ $# -ne 1 ]; then
		__print_err "<response-code>" $@
		return 1
	fi
	query="/status"
	TMP_PREFIX=$A1PMS_API_PREFIX
	A1PMS_API_PREFIX=""
    res="$(__do_curl_to_api A1PMS GET $query)"
	A1PMS_API_PREFIX=$TMP_PREFIX
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 19 "GET" "/status" $status
	__log_test_pass
	return 0
}

#########################################################
#### Test case functions RIC Repository
#########################################################

# API Test function: GET /ric and V2 GET /v2/rics/ric
# args: <reponse-code> <management-element-id> [<ric-id>]
# (V2) args: <reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [<string-of-ricinfo>]
# (V2) example of <string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4"
# (V2) format of ric-info:  <ric-id>:<list-of-mes>:<list-of-policy-type-ids>


# (Function for test scripts)
a1pms_api_get_ric() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" == "V2" ]; then
		if [ $# -lt 3 ]; then
			__print_err "<reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [string-of-ricinfo>]" $@
			return 1
		fi
		search=""
		if [ $2 != "NOME" ]; then
			search="?managed_element_id="$2
		fi
		if [ $3 != "NORIC" ]; then
			if [ -z $search ]; then
				search="?ric_id="$3
			else
				search=$search"&ric_id="$3
			fi
		fi
		query="/v2/rics/ric"$search

		res="$(__do_curl_to_api A1PMS GET $query)"
		status=${res:${#res}-3}

		if [ $status -ne $1 ]; then
			__log_test_fail_status_code $1 $status
			return 1
		fi

		if [ $# -gt 3 ]; then
			body=${res:0:${#res}-3}
			res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" )
			if [ $res -ne 0 ]; then
				__log_test_fail_general "Could not create target ric info json"
				return 1
			fi

			targetJson=$(<./tmp/.tmp_rics.json)
			targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets
			echo " TARGET JSON: $targetJson" >> $HTTPLOG
			res=$(python3 ../common/compare_json.py "$targetJson" "$body")
			if [ $res -ne 0 ]; then
				__log_test_fail_body
				return 1
			fi
		fi
	else
		if [ $# -lt 2 ] || [ $# -gt 3 ]; then
			__print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
			return 1
		fi

		query="/ric?managedElementId="$2

		res="$(__do_curl_to_api A1PMS GET $query)"
		status=${res:${#res}-3}

		if [ $status -ne $1 ]; then
			__log_test_fail_status_code $1 $status
			return 1
		fi

		if [ $# -eq 3 ]; then
			body=${res:0:${#res}-3}
			if [ "$body" != "$3" ]; then
				__log_test_fail_body
				return 1
			fi
		fi
	fi

	__collect_endpoint_stats "A1PMS" 11 "GET" $A1PMS_API_PREFIX"/v2/rics/ric" $status
	__log_test_pass
	return 0
}

# API test function: GET /rics and V2 GET /v2/rics
# args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
# example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
# format of ric-info:  <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
# (Function for test scripts)
a1pms_api_get_rics() {
	__log_test_start $@

    if [ $# -lt 2 ]; then
		__print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/rics"
		if [ $2 != "NOTYPE" ]; then
			query="/v2/rics?policytype_id="$2
		fi
	else
		query="/rics"
		if [ $2 != "NOTYPE" ]; then
			query="/rics?policyType="$2
		fi
	fi

    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -gt 2 ]; then
		body=${res:0:${#res}-3}
		if [ "$A1PMS_VERSION" == "V2" ]; then
			res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" )
		else
			res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" )
		fi
		if [ $res -ne 0 ]; then
			__log_test_fail_general "Could not create target ric info json"
			return 1
		fi

		targetJson=$(<./tmp/.tmp_rics.json)
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson="{\"rics\": $targetJson }"
		fi
    	echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")
		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 12 "GET" $A1PMS_API_PREFIX"/v2/rics" $status
	__log_test_pass
	return 0
}

##################################################################
#### API Test case functions Service registry and supervision ####
##################################################################

# API test function: PUT /service and V2 PUT /service
# args: <response-code>  <service-name> <keepalive-timeout> <callbackurl>
# (Function for test scripts)
a1pms_api_put_service() {
	__log_test_start $@
    if [ $# -ne 4 ]; then
        __print_err "<response-code>  <service-name> <keepalive-timeout> <callbackurl>" $@
        return 1
    fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/services"
		json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}"
	else
		query="/service"
		json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
	fi
    file="./tmp/.tmp.json"
	echo "$json" > $file

    res="$(__do_curl_to_api A1PMS PUT $query $file)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 13 "PUT" $A1PMS_API_PREFIX"/v2/service" $status
	__log_test_pass
	return 0
}

# API test function: GET /services and V2 GET /v2/services
#args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
# (Function for test scripts)
a1pms_api_get_services() {
	__log_test_start $@
	#Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
	paramError=1
	if [ $# -eq 1 ]; then
		paramError=0
	elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
		paramError=0
	elif [ $# -eq 5 ]; then
		paramError=0
	elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
		argLen=$(($#-2))
		if [ $(($argLen%3)) -eq 0 ]; then
			paramError=0
		fi
	fi

    if [ $paramError -ne 0 ]; then
		__print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/services"

		if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
			query="/v2/services?service_id="$2
		fi
	else
		query="/services"

		if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
			query="/services?name="$2
		fi
	fi
    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -gt 2 ]; then
		variableArgCount=$(($#-2))
		body=${res:0:${#res}-3}
    	targetJson="["
		shift; shift;
		cntr=0
		while [ $cntr -lt $variableArgCount ]; do
			servicename=$1; shift;
			timeout=$1; shift;
			callback=$1; shift;
			if [ $cntr -gt 0 ]; then
				targetJson=$targetJson","
			fi
			# timeSinceLastActivitySeconds value cannot be checked since value varies
			if [ "$A1PMS_VERSION" == "V2" ]; then
				targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}"
			else
				targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
			fi
			let cntr=cntr+3
		done
		targetJson=$targetJson"]"
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson="{\"service_list\": $targetJson }"
		fi
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")
		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
	__log_test_pass
	return 0
}

# API test function: GET /services V2 GET /v2/services -  (only checking service names)
# args: <response-code> [<service-name>]*"
# (Function for test scripts)
a1pms_api_get_service_ids() {
	__log_test_start $@

    if [ $# -lt 1 ]; then
		__print_err "<response-code> [<service-name>]*" $@
		return 1
	fi

	if [ "$A1PMS_VERSION" == "V2" ]; then
	    query="/v2/services"
	else
    	query="/services"
	fi
    res="$(__do_curl_to_api A1PMS GET $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	body=${res:0:${#res}-3}
	targetJson="["
	for rapp in ${@:2} ; do
		if [ "$targetJson" != "[" ]; then
			targetJson=$targetJson","
		fi
		if [ "$A1PMS_VERSION" == "V2" ]; then
			targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}"
		else
			targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
		fi
	done

	targetJson=$targetJson"]"
	if [ "$A1PMS_VERSION" == "V2" ]; then
		targetJson="{\"service_list\": $targetJson }"
	fi
	echo "TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
		__log_test_fail_body
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
	__log_test_pass
	return 0
}

# API test function: DELETE /services and V2 DELETE /v2/services/{serviceId}
# args: <response-code> <service-name>
# (Function for test scripts)
a1pms_api_delete_services() {
	__log_test_start $@

    if [ $# -ne 2 ]; then
		__print_err "<response-code> <service-name>" $@
		return 1
	fi
	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/services/"$2
	else
		query="/services?name="$2
	fi
    res="$(__do_curl_to_api A1PMS DELETE $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 15 "DELETE" $A1PMS_API_PREFIX"/v2/services/{serviceId}" $status
	__log_test_pass
	return 0
}

# API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive
# args: <response-code> <service-name>
# (Function for test scripts)
a1pms_api_put_services_keepalive() {
	__log_test_start $@

    if [ $# -ne 2 ]; then
		__print_err "<response-code> <service-name>" $@
		return 1
	fi
	if [ "$A1PMS_VERSION" == "V2" ]; then
		query="/v2/services/$2/keepalive"
	else
    	query="/services/keepalive?name="$2
	fi

    res="$(__do_curl_to_api A1PMS PUT $query)"
    status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 16 "PUT" $A1PMS_API_PREFIX"/v2/services/{service_id}/keepalive" $status
	__log_test_pass
	return 0
}

##################################################################
#### API Test case functions Configuration                    ####
##################################################################

# API Test function: PUT /v2/configuration
# args: <response-code> <config-file>
# (Function for test scripts)
a1pms_api_put_configuration() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" != "V2" ]; then
		__log_test_fail_not_supported
		return 1
	fi

    if [ $# -ne 2 ]; then
        __print_err "<response-code> <config-file>" $@
        return 1
    fi
	if [ ! -f $2 ]; then
		__log_test_fail_general "Config file "$2", does not exist"
		return 1
	fi
	inputJson=$(< $2)
	# if [ $RUNMODE == "DOCKER" ]; then  #In kube the file already has a header
	# 	inputJson="{\"config\":"$inputJson"}"
	# fi
	file="./tmp/.config.json"
	echo $inputJson > $file
	query="/v2/configuration"
	res="$(__do_curl_to_api A1PMS PUT $query $file)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	__collect_endpoint_stats "A1PMS" 17 "PUT" $A1PMS_API_PREFIX"/v2/configuration" $status
	__log_test_pass
	return 0
}

# API Test function: GET /v2/configuration
# args: <response-code> [<config-file>]
# (Function for test scripts)
a1pms_api_get_configuration() {
	__log_test_start $@

	if [ "$A1PMS_VERSION" != "V2" ]; then
		__log_test_fail_not_supported
		return 1
	fi

    if [ $# -lt 1 ] || [ $# -gt 2 ]; then
        __print_err "<response-code> [<config-file>]" $@
        return 1
    fi
	if [ ! -f $2 ]; then
		__log_test_fail_general "Config file "$2" for comparison, does not exist"
		return 1
	fi

	query="/v2/configuration"
	res="$(__do_curl_to_api A1PMS GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
		__log_test_fail_status_code $1 $status
		return 1
	fi

	if [ $# -eq 2 ]; then

		body=${res:0:${#res}-3}

		targetJson=$(< $2)
		# if [ $RUNMODE == "DOCKER" ]; then  #In kube the file already has a header
		# 	inputJson="{\"config\":"$inputJson"}"
		# fi
		echo "TARGET JSON: $targetJson" >> $HTTPLOG
		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

		if [ $res -ne 0 ]; then
			__log_test_fail_body
			return 1
		fi
	fi

	__collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v2/configuration" $status
	__log_test_pass
	return 0
}

##########################################
####     Reset types and instances    ####
##########################################

# Admin reset to remove all policies and services
# All types and instances etc are removed - types and instances in a1 sims need to be removed separately
# NOTE - only works in kubernetes and the pod should not be running
# args: -
# (Function for test scripts)

a1pms_kube_pvc_reset() {
	__log_test_start $@

	pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE  --no-headers -o custom-columns=":metadata.name" | grep policy)
	if [ -z "$pvc_name" ]; then
		pvc_name=policymanagementservice-vardata-pvc
	fi
	echo " Trying to reset pvc: "$pvc_name
	__kube_clean_pvc $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $A1PMS_CONTAINER_MNT_DIR

	__log_test_pass
	return 0
}

# args: <realm> <client-name> <client-secret>
a1pms_configure_sec() {
	export A1PMS_CREDS_GRANT_TYPE="client_credentials"
	export A1PMS_CREDS_CLIENT_SECRET=$3
	export A1PMS_CREDS_CLIENT_ID=$2
	export A1PMS_AUTH_SERVICE_URL=$KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token
	export A1PMS_SIDECAR_MOUNT="/token-cache"
	export A1PMS_SIDECAR_JWT_FILE=$A1PMS_SIDECAR_MOUNT"/jwt.txt"

	export AUTHSIDECAR_APP_NAME
	export AUTHSIDECAR_DISPLAY_NAME
}