test/common/control_panel_api_functions.sh - oransc/nonrtric - Gitiles

 #!/bin/bash

 #  ============LICENSE_START===============================================
 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
 #  ========================================================================
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #  ============LICENSE_END=================================================
 #

 # This is a script that contains container/service management function
 # and test functions for Control Panel

 ################ Test engine functions ################

 # Create the image var used during the test
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __CP_imagesetup() {
 	__check_and_create_image_var CP "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_IMAGE_BASE" "CONTROL_PANEL_IMAGE_TAG" $1 "$CONTROL_PANEL_DISPLAY_NAME"
 }

 # Pull image from remote repo or use locally built image
 # arg: <pull-policy-override> <pull-policy-original>
 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
 # <pull-policy-original> Shall be used for images that does not allow overriding
 # Both var may contain: 'remote', 'remote-remove' or 'local'
 __CP_imagepull() {
 	__check_and_pull_image $1 "$CONTROL_PANEL_DISPLAY_NAME" $CONTROL_PANEL_APP_NAME CONTROL_PANEL_IMAGE
 }

 # Build image (only for simulator or interfaces stubs owned by the test environment)
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __CP_imagebuild() {
 	echo -e $RED" Image for app CP shall never be built"$ERED
 }

 # Generate a string for each included image using the app display name and a docker images format string
 # If a custom image repo is used then also the source image from the local repo is listed
 # arg: <docker-images-format-string> <file-to-append>
 __CP_image_data() {
 	echo -e "$CONTROL_PANEL_DISPLAY_NAME\t$(docker images --format $1 $CONTROL_PANEL_IMAGE)" >>   $2
 	if [ ! -z "$CONTROL_PANEL_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $CONTROL_PANEL_IMAGE_SOURCE)" >>   $2
 	fi
 }

 # Scale kubernetes resources to zero
 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 # This function is called for apps fully managed by the test script
 __CP_kube_scale_zero() {
 	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
 }

 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 # This function is called for prestarted apps not managed by the test script.
 __CP_kube_scale_zero_and_wait() {
 	echo -e " CP replicas kept as is"
 }

 # Delete all kube resouces for the app
 # This function is called for apps managed by the test script.
 __CP_kube_delete_all() {
 	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
 }

 # Store docker logs
 # This function is called for apps managed by the test script.
 # args: <log-dir> <file-prexix>
 __CP_store_docker_logs() {
 	if [ $RUNMODE == "KUBE" ]; then
 		kubectl  logs -l "autotest=CP" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_control-panel.log 2>&1
 	else
 		docker logs $CONTROL_PANEL_APP_NAME > $1$2_control-panel.log 2>&1
 	fi
 }

 # Initial setup of protocol, host and ports
 # This function is called for apps managed by the test script.
 # args: -
 __CP_initial_setup() {
 	use_control_panel_http
 }
 #######################################################


 ###########################
 ### Control Panel functions
 ###########################

 # Set http as the protocol to use for all communication to the Control Panel
 # args: -
 # (Function for test scripts)
 use_control_panel_http() {
 	__control_panel_set_protocoll "http" $CONTROL_PANEL_INTERNAL_PORT $CONTROL_PANEL_EXTERNAL_PORT
 }

 # Set https as the protocol to use for all communication to the Control Panel
 # args: -
 # (Function for test scripts)
 use_control_panel_https() {
 	__control_panel_set_protocoll "https" $CONTROL_PANEL_INTERNAL_SECURE_PORT $CONTROL_PANEL_EXTERNAL_SECURE_PORT
 }

 # Setup paths to svc/container for internal and external access
 # args: <protocol> <internal-port> <external-port>
 __control_panel_set_protocoll() {
 	echo -e $BOLD"$CONTROL_PANEL_DISPLAY_NAME protocol setting"$EBOLD
 	echo -e " Using $BOLD http $EBOLD towards $CONTROL_PANEL_DISPLAY_NAME"

 	CP_SERVICE_PATH=$1"://"$CONTROL_PANEL_APP_NAME":"$2
 	if [ $RUNMODE == "KUBE" ]; then
 		CP_SERVICE_PATH=$1"://"$CONTROL_PANEL_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3
 	fi
 	echo ""
 }

 # Export env vars for config files, docker compose and kube resources
 # args: -
 __control_panel_export_vars() {
 	#Export all vars needed for service and deployment
 	export CONTROL_PANEL_APP_NAME
 	export CONTROL_PANEL_DISPLAY_NAME
 	export KUBE_NONRTRIC_NAMESPACE
 	export DOCKER_SIM_NWNAME

 	export CONTROL_PANEL_IMAGE
 	export CONTROL_PANEL_INTERNAL_PORT
 	export CONTROL_PANEL_INTERNAL_SECURE_PORT
 	export CONTROL_PANEL_EXTERNAL_PORT
 	export CONTROL_PANEL_EXTERNAL_SECURE_PORT
 	export CONTROL_PANEL_CONFIG_MOUNT_PATH
 	export CONTROL_PANEL_CONFIG_FILE
 	export CONTROL_PANEL_HOST_MNT_DIR

 	export CP_CONFIG_CONFIGMAP_NAME=$CONTROL_PANEL_APP_NAME"-config"
 	export CP_PROXY_CONFIGMAP_NAME=$CONTROL_PANEL_APP_NAME"-proxy"

 	export CONTROL_PANEL_PATH_POLICY_PREFIX
 	export CONTROL_PANEL_PATH_ECS_PREFIX
 	export CONTROL_PANEL_PATH_ECS_PREFIX2

 	export NRT_GATEWAY_APP_NAME
 	export NRT_GATEWAY_EXTERNAL_PORT

 	export POLICY_AGENT_EXTERNAL_SECURE_PORT
 	export ECS_EXTERNAL_SECURE_PORT

 	if [ $RUNMODE == "KUBE" ]; then
 		export NGW_DOMAIN_NAME=$NRT_GATEWAY_APP_NAME.$KUBE_NONRTRIC_NAMESPACE.svc.cluster.local  # suffix needed for nginx name resolution
 		export CP_NGINX_RESOLVER=$CONTROL_PANEL_NGINX_KUBE_RESOLVER
 	else
 		export POLICY_AGENT_DOMAIN_NAME=$POLICY_AGENT_APP_NAME
 		export ECS_DOMAIN_NAME=$ECS_APP_NAME

 		export NGW_DOMAIN_NAME=$NRT_GATEWAY_APP_NAME
 		export CP_NGINX_RESOLVER=$CONTROL_PANEL_NGINX_DOCKER_RESOLVER
 	fi
 }

 # Start the Control Panel container
 # args: -
 # (Function for test scripts)
 start_control_panel() {

 	echo -e $BOLD"Starting $CONTROL_PANEL_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then

 		# Check if app shall be fully managed by the test script
 		__check_included_image "CP"
 		retcode_i=$?

 		# Check if app shall only be used by the testscipt
 		__check_prestarted_image "CP"
 		retcode_p=$?

 		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
 			echo -e $RED"The $CONTROL_PANEL_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
 			echo -e $RED"The $CONTROL_PANEL_APP_NAME will not be started"$ERED
 			exit
 		fi
 		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
 			echo -e $RED"The $CONTROL_PANEL_APP_NAME app is included both as managed and prestarted in this test script"$ERED
 			echo -e $RED"The $CONTROL_PANEL_APP_NAME will not be started"$ERED
 			exit
 		fi

 		# Check if app shall be used - not managed - by the test script
 		__check_prestarted_image "CP"
 		if [ $? -eq 0 ]; then
 			echo -e " Using existing $CONTROL_PANEL_APP_NAME deployment and service"
 			echo " Setting CP replicas=1"
 			__kube_scale deployment $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
 		fi

 		if [ $retcode_i -eq 0 ]; then

 			echo -e " Creating $CONTROL_PANEL_APP_NAME app and expose service"

 			__control_panel_export_vars

 			#Check if nonrtric namespace exists, if not create it
 			__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

 			# Create config map for config
 			datafile=$PWD/tmp/$CONTROL_PANEL_CONFIG_FILE
 			#Add config to properties file

 			#Trick to prevent these two vars to be replace with space in the config file by cmd envsubst
 			export upstream='$upstream'
 			export uri='$uri'

 			envsubst < $1 > $datafile

 			output_yaml=$PWD/tmp/cp_cfc.yaml
 			__kube_create_configmap $CP_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest CP $datafile $output_yaml

 			# Create service
 			input_yaml=$SIM_GROUP"/"$CONTROL_PANEL_COMPOSE_DIR"/"svc.yaml
 			output_yaml=$PWD/tmp/cp_svc.yaml
 			__kube_create_instance service $CONTROL_PANEL_APP_NAME $input_yaml $output_yaml

 			# Create app
 			input_yaml=$SIM_GROUP"/"$CONTROL_PANEL_COMPOSE_DIR"/"app.yaml
 			output_yaml=$PWD/tmp/cp_app.yaml
 			__kube_create_instance app $CONTROL_PANEL_APP_NAME $input_yaml $output_yaml

 		fi

 		__check_service_start $CONTROL_PANEL_APP_NAME $CP_SERVICE_PATH$CONTROL_PANEL_ALIVE_URL

 		CP_PORT1=$(__kube_get_service_nodeport $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http")
 		CP_PORT2=$(__kube_get_service_nodeport $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https")

 		echo " $CONTROL_PANEL_DISPLAY_NAME node ports (http/https): $CP_PORT1 $CP_PORT2"
 	else
 		# Check if docker app shall be fully managed by the test script
 		__check_included_image 'CP'
 		if [ $? -eq 1 ]; then
 			echo -e $RED"The Control Panel app is not included in this test script"$ERED
 			echo -e $RED"The Control Panel will not be started"$ERED
 			exit
 		fi

 		__control_panel_export_vars

 		dest_file=$SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_HOST_MNT_DIR/$CONTROL_PANEL_CONFIG_FILE

 		envsubst '${NGW_DOMAIN_NAME},${CP_NGINX_RESOLVER},${NRT_GATEWAY_EXTERNAL_PORT},${POLICY_AGENT_EXTERNAL_SECURE_PORT},${ECS_EXTERNAL_SECURE_PORT},${POLICY_AGENT_DOMAIN_NAME},${ECS_DOMAIN_NAME},${CONTROL_PANEL_PATH_POLICY_PREFIX},${CONTROL_PANEL_PATH_ECS_PREFIX} ,${CONTROL_PANEL_PATH_ECS_PREFIX2}' < $1 > $dest_file

 		__start_container $CONTROL_PANEL_COMPOSE_DIR "" NODOCKERARGS 1 $CONTROL_PANEL_APP_NAME

 		__check_service_start $CONTROL_PANEL_APP_NAME $CP_SERVICE_PATH$CONTROL_PANEL_ALIVE_URL

 		echo " $CONTROL_PANEL_DISPLAY_NAME locahost ports (http/https): $CONTROL_PANEL_EXTERNAL_PORT $CONTROL_PANEL_EXTERNAL_SECURE_PORT"
 	fi
 	echo ""
 }
	#!/bin/bash

	# ============LICENSE_START===============================================
	# Copyright (C) 2020 Nordix Foundation. All rights reserved.
	# ========================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=================================================
	#

	# This is a script that contains container/service management function
	# and test functions for Control Panel

	################ Test engine functions ################

	# Create the image var used during the test
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__CP_imagesetup() {
	__check_and_create_image_var CP "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_IMAGE_BASE" "CONTROL_PANEL_IMAGE_TAG" $1 "$CONTROL_PANEL_DISPLAY_NAME"
	}

	# Pull image from remote repo or use locally built image
	# arg: <pull-policy-override> <pull-policy-original>
	# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
	# <pull-policy-original> Shall be used for images that does not allow overriding
	# Both var may contain: 'remote', 'remote-remove' or 'local'
	__CP_imagepull() {
	__check_and_pull_image $1 "$CONTROL_PANEL_DISPLAY_NAME" $CONTROL_PANEL_APP_NAME CONTROL_PANEL_IMAGE
	}

	# Build image (only for simulator or interfaces stubs owned by the test environment)
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__CP_imagebuild() {
	echo -e $RED" Image for app CP shall never be built"$ERED
	}

	# Generate a string for each included image using the app display name and a docker images format string
	# If a custom image repo is used then also the source image from the local repo is listed
	# arg: <docker-images-format-string> <file-to-append>
	__CP_image_data() {
	echo -e "$CONTROL_PANEL_DISPLAY_NAME\t$(docker images --format $1 $CONTROL_PANEL_IMAGE)" >> $2
	if [ ! -z "$CONTROL_PANEL_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $CONTROL_PANEL_IMAGE_SOURCE)" >> $2
	fi
	}

	# Scale kubernetes resources to zero
	# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
	# This function is called for apps fully managed by the test script
	__CP_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
	}

	# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
	# This function is called for prestarted apps not managed by the test script.
	__CP_kube_scale_zero_and_wait() {
	echo -e " CP replicas kept as is"
	}

	# Delete all kube resouces for the app
	# This function is called for apps managed by the test script.
	__CP_kube_delete_all() {
	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
	}

	# Store docker logs
	# This function is called for apps managed by the test script.
	# args: <log-dir> <file-prexix>
	__CP_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
	kubectl logs -l "autotest=CP" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_control-panel.log 2>&1
	else
	docker logs $CONTROL_PANEL_APP_NAME > $1$2_control-panel.log 2>&1
	fi
	}

	# Initial setup of protocol, host and ports
	# This function is called for apps managed by the test script.
	# args: -
	__CP_initial_setup() {
	use_control_panel_http
	}
	#######################################################


	###########################
	### Control Panel functions
	###########################

	# Set http as the protocol to use for all communication to the Control Panel
	# args: -
	# (Function for test scripts)
	use_control_panel_http() {
	__control_panel_set_protocoll "http" $CONTROL_PANEL_INTERNAL_PORT $CONTROL_PANEL_EXTERNAL_PORT
	}

	# Set https as the protocol to use for all communication to the Control Panel
	# args: -
	# (Function for test scripts)
	use_control_panel_https() {
	__control_panel_set_protocoll "https" $CONTROL_PANEL_INTERNAL_SECURE_PORT $CONTROL_PANEL_EXTERNAL_SECURE_PORT
	}

	# Setup paths to svc/container for internal and external access
	# args: <protocol> <internal-port> <external-port>
	__control_panel_set_protocoll() {
	echo -e $BOLD"$CONTROL_PANEL_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD towards $CONTROL_PANEL_DISPLAY_NAME"

	CP_SERVICE_PATH=$1"://"$CONTROL_PANEL_APP_NAME":"$2
	if [ $RUNMODE == "KUBE" ]; then
	CP_SERVICE_PATH=$1"://"$CONTROL_PANEL_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3
	fi
	echo ""
	}

	# Export env vars for config files, docker compose and kube resources
	# args: -
	__control_panel_export_vars() {
	#Export all vars needed for service and deployment
	export CONTROL_PANEL_APP_NAME
	export CONTROL_PANEL_DISPLAY_NAME
	export KUBE_NONRTRIC_NAMESPACE
	export DOCKER_SIM_NWNAME

	export CONTROL_PANEL_IMAGE
	export CONTROL_PANEL_INTERNAL_PORT
	export CONTROL_PANEL_INTERNAL_SECURE_PORT
	export CONTROL_PANEL_EXTERNAL_PORT
	export CONTROL_PANEL_EXTERNAL_SECURE_PORT
	export CONTROL_PANEL_CONFIG_MOUNT_PATH
	export CONTROL_PANEL_CONFIG_FILE
	export CONTROL_PANEL_HOST_MNT_DIR

	export CP_CONFIG_CONFIGMAP_NAME=$CONTROL_PANEL_APP_NAME"-config"
	export CP_PROXY_CONFIGMAP_NAME=$CONTROL_PANEL_APP_NAME"-proxy"

	export CONTROL_PANEL_PATH_POLICY_PREFIX
	export CONTROL_PANEL_PATH_ECS_PREFIX
	export CONTROL_PANEL_PATH_ECS_PREFIX2

	export NRT_GATEWAY_APP_NAME
	export NRT_GATEWAY_EXTERNAL_PORT

	export POLICY_AGENT_EXTERNAL_SECURE_PORT
	export ECS_EXTERNAL_SECURE_PORT

	if [ $RUNMODE == "KUBE" ]; then
	export NGW_DOMAIN_NAME=$NRT_GATEWAY_APP_NAME.$KUBE_NONRTRIC_NAMESPACE.svc.cluster.local # suffix needed for nginx name resolution
	export CP_NGINX_RESOLVER=$CONTROL_PANEL_NGINX_KUBE_RESOLVER
	else
	export POLICY_AGENT_DOMAIN_NAME=$POLICY_AGENT_APP_NAME
	export ECS_DOMAIN_NAME=$ECS_APP_NAME

	export NGW_DOMAIN_NAME=$NRT_GATEWAY_APP_NAME
	export CP_NGINX_RESOLVER=$CONTROL_PANEL_NGINX_DOCKER_RESOLVER
	fi
	}

	# Start the Control Panel container
	# args: -
	# (Function for test scripts)
	start_control_panel() {

	echo -e $BOLD"Starting $CONTROL_PANEL_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

	# Check if app shall be fully managed by the test script
	__check_included_image "CP"
	retcode_i=$?

	# Check if app shall only be used by the testscipt
	__check_prestarted_image "CP"
	retcode_p=$?

	if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
	echo -e $RED"The $CONTROL_PANEL_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
	echo -e $RED"The $CONTROL_PANEL_APP_NAME will not be started"$ERED
	exit
	fi
	if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
	echo -e $RED"The $CONTROL_PANEL_APP_NAME app is included both as managed and prestarted in this test script"$ERED
	echo -e $RED"The $CONTROL_PANEL_APP_NAME will not be started"$ERED
	exit
	fi

	# Check if app shall be used - not managed - by the test script
	__check_prestarted_image "CP"
	if [ $? -eq 0 ]; then
	echo -e " Using existing $CONTROL_PANEL_APP_NAME deployment and service"
	echo " Setting CP replicas=1"
	__kube_scale deployment $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
	fi

	if [ $retcode_i -eq 0 ]; then

	echo -e " Creating $CONTROL_PANEL_APP_NAME app and expose service"

	__control_panel_export_vars

	#Check if nonrtric namespace exists, if not create it
	__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

	# Create config map for config
	datafile=$PWD/tmp/$CONTROL_PANEL_CONFIG_FILE
	#Add config to properties file

	#Trick to prevent these two vars to be replace with space in the config file by cmd envsubst
	export upstream='$upstream'
	export uri='$uri'

	envsubst < $1 > $datafile

	output_yaml=$PWD/tmp/cp_cfc.yaml
	__kube_create_configmap $CP_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest CP $datafile $output_yaml

	# Create service
	input_yaml=$SIM_GROUP"/"$CONTROL_PANEL_COMPOSE_DIR"/"svc.yaml
	output_yaml=$PWD/tmp/cp_svc.yaml
	__kube_create_instance service $CONTROL_PANEL_APP_NAME $input_yaml $output_yaml

	# Create app
	input_yaml=$SIM_GROUP"/"$CONTROL_PANEL_COMPOSE_DIR"/"app.yaml
	output_yaml=$PWD/tmp/cp_app.yaml
	__kube_create_instance app $CONTROL_PANEL_APP_NAME $input_yaml $output_yaml

	fi

	__check_service_start $CONTROL_PANEL_APP_NAME $CP_SERVICE_PATH$CONTROL_PANEL_ALIVE_URL

	CP_PORT1=$(__kube_get_service_nodeport $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http")
	CP_PORT2=$(__kube_get_service_nodeport $CONTROL_PANEL_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https")

	echo " $CONTROL_PANEL_DISPLAY_NAME node ports (http/https): $CP_PORT1 $CP_PORT2"
	else
	# Check if docker app shall be fully managed by the test script
	__check_included_image 'CP'
	if [ $? -eq 1 ]; then
	echo -e $RED"The Control Panel app is not included in this test script"$ERED
	echo -e $RED"The Control Panel will not be started"$ERED
	exit
	fi

	__control_panel_export_vars

	dest_file=$SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_HOST_MNT_DIR/$CONTROL_PANEL_CONFIG_FILE

	envsubst '${NGW_DOMAIN_NAME},${CP_NGINX_RESOLVER},${NRT_GATEWAY_EXTERNAL_PORT},${POLICY_AGENT_EXTERNAL_SECURE_PORT},${ECS_EXTERNAL_SECURE_PORT},${POLICY_AGENT_DOMAIN_NAME},${ECS_DOMAIN_NAME},${CONTROL_PANEL_PATH_POLICY_PREFIX},${CONTROL_PANEL_PATH_ECS_PREFIX} ,${CONTROL_PANEL_PATH_ECS_PREFIX2}' < $1 > $dest_file

	__start_container $CONTROL_PANEL_COMPOSE_DIR "" NODOCKERARGS 1 $CONTROL_PANEL_APP_NAME

	__check_service_start $CONTROL_PANEL_APP_NAME $CP_SERVICE_PATH$CONTROL_PANEL_ALIVE_URL

	echo " $CONTROL_PANEL_DISPLAY_NAME locahost ports (http/https): $CONTROL_PANEL_EXTERNAL_PORT $CONTROL_PANEL_EXTERNAL_SECURE_PORT"
	fi
	echo ""
	}