blob: 19fd96f5f36fbba3e119b60e9dd17e76008ebb00 [file] [log] [blame]
#!/bin/bash
# ============LICENSE_START===============================================
# Copyright (C) 2020 Nordix Foundation. All rights reserved.
# ========================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END=================================================
#
TC_ONELINE_DESCR="Create 10000 policies in sequence using http/https and Agent REST/DMAAP with/without SDNC controller"
#App names to include in the test when running docker, space separated list
DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC NGW"
#App names to include in the test when running kubernetes, space separated list
KUBE_INCLUDED_IMAGES="CP CR MR PA RICSIM SDNC KUBEPROXY NGW"
#Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
KUBE_PRESTARTED_IMAGES=""
#Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
#the image is not configured in the supplied env_file
#Used for images not applicable to all supported profile
CONDITIONALLY_IGNORED_IMAGES="NGW"
#Supported test environment profiles
SUPPORTED_PROFILES="ONAP-GUILIN ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE"
#Supported run modes
SUPPORTED_RUNMODES="DOCKER KUBE"
. ../common/testcase_common.sh $@
. ../common/agent_api_functions.sh
. ../common/ricsimulator_api_functions.sh
. ../common/cr_api_functions.sh
. ../common/mr_api_functions.sh
. ../common/control_panel_api_functions.sh
. ../common/controller_api_functions.sh
. ../common/consul_cbs_functions.sh
. ../common/kube_proxy_api_functions.sh
. ../common/gateway_api_functions.sh
setup_testenvironment
#### TEST BEGIN ####
generate_policy_uuid
#Local vars in test script
##########################
# Number of policies in each sequence
NUM_POLICIES=10000
# Tested variants of REST/DMAAP/SDNC config
TESTED_VARIANTS="NOSDNC SDNC"
#Test agent and simulator protocol versions (others are http only)
TESTED_PROTOCOLS="HTTP HTTPS"
for __httpx in $TESTED_PROTOCOLS ; do
for interface in $TESTED_VARIANTS ; do
echo "#####################################################################"
echo "#####################################################################"
echo "### Testing agent via $interface using $__httpx"
echo "#####################################################################"
echo "#####################################################################"
if [ $__httpx == "HTTPS" ]; then
use_cr_https
use_simulator_https
use_mr_https
use_agent_rest_https
else
use_cr_http
use_simulator_http
use_mr_http
use_agent_rest_http
fi
# Policy instance start id
START_ID=1
clean_environment
if [ $RUNMODE == "KUBE" ]; then
start_kube_proxy
fi
start_ric_simulators ricsim_g1 1 OSC_2.1.0
start_ric_simulators ricsim_g2 1 STD_1.1.3
if [ "$PMS_VERSION" == "V2" ]; then
start_ric_simulators ricsim_g3 1 STD_2.0.0
fi
start_mr
start_cr
start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
fi
start_policy_agent NORPOXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
set_agent_debug
mr_equal requests_submitted 0
if [[ $interface == "SDNC" ]]; then
start_sdnc
prepare_consul_config SDNC ".consul_config.json"
else
prepare_consul_config NOSDNC ".consul_config.json"
fi
if [ $RUNMODE == "DOCKER" ]; then
start_consul_cbs
fi
if [ $RUNMODE == "KUBE" ]; then
agent_load_config ".consul_config.json"
else
consul_config_app ".consul_config.json"
fi
api_get_status 200
sim_print ricsim_g1_1 interface
sim_print ricsim_g2_1 interface
if [ "$PMS_VERSION" == "V2" ]; then
sim_print ricsim_g3_1 interface
fi
sim_put_policy_type 201 ricsim_g1_1 1 testdata/OSC/sim_1.json
if [ "$PMS_VERSION" == "V2" ]; then
sim_put_policy_type 201 ricsim_g3_1 STD_QOS2_0.1.0 testdata/STD2/sim_qos2.json
api_equal json:policy-types 3 300 #Wait for the agent to refresh types from the simulators
else
api_equal json:policy_types 2 300 #Wait for the agent to refresh types from the simulators
fi
api_put_service 201 "serv1" 3600 "$CR_SERVICE_PATH/1"
if [ "$PMS_VERSION" == "V2" ]; then
notificationurl=$CR_SERVICE_PATH"/test"
else
notificationurl=""
fi
start_timer "Create polices in OSC via agent REST and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
print_timer "Create polices in OSC via agent REST and $interface using "$__httpx
sim_equal ricsim_g1_1 num_instances $NUM_POLICIES
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD via agent REST and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent REST and $interface using "$__httpx
sim_equal ricsim_g2_1 num_instances $NUM_POLICIES
if [ "$PMS_VERSION" == "V2" ]; then
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD 2 via agent REST and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent REST and $interface using "$__httpx
sim_equal ricsim_g3_1 num_instances $NUM_POLICIES
fi
if [ $__httpx == "HTTPS" ]; then
echo "Using secure ports towards dmaap"
use_agent_dmaap_https
else
echo "Using non-secure ports towards dmaap"
use_agent_dmaap_http
fi
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in OSC via agent DMAAP, one by one, and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
print_timer "Create polices in OSC via agent DMAAP, one by one, and $interface using "$__httpx
sim_equal ricsim_g1_1 num_instances $((2*$NUM_POLICIES))
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD via agent DMAAP, one by one, and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent DMAAP, one by one, and $interface using "$__httpx
sim_equal ricsim_g2_1 num_instances $((2*$NUM_POLICIES))
if [ "$PMS_VERSION" == "V2" ]; then
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD 2 via agent DMAAP, one by one, and $interface using "$__httpx
api_put_policy 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent DMAAP, one by one, and $interface using "$__httpx
sim_equal ricsim_g3_1 num_instances $((2*$NUM_POLICIES))
fi
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in OSC via agent DMAAP in batch and $interface using "$__httpx
api_put_policy_batch 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
print_timer "Create polices in OSC via agent DMAAP in batch and $interface using "$__httpx
sim_equal ricsim_g1_1 num_instances $((3*$NUM_POLICIES))
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD via agent DMAAP in batch and $interface using "$__httpx
api_put_policy_batch 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent DMAAP in batch and $interface using "$__httpx
sim_equal ricsim_g2_1 num_instances $((3*$NUM_POLICIES))
if [ "$PMS_VERSION" == "V2" ]; then
START_ID=$(($START_ID+$NUM_POLICIES))
start_timer "Create polices in STD via agent DMAAP in batch and $interface using "$__httpx
api_put_policy_batch 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
print_timer "Create polices in STD via agent DMAAP in batch and $interface using "$__httpx
sim_equal ricsim_g3_1 num_instances $((3*$NUM_POLICIES))
fi
if [ $interface == "SDNC" ]; then
sim_contains_str ricsim_g1_1 remote_hosts $SDNC_APP_NAME
sim_contains_str ricsim_g2_1 remote_hosts $SDNC_APP_NAME
if [ "$PMS_VERSION" == "V2" ]; then
sim_contains_str ricsim_g3_1 remote_hosts $SDNC_APP_NAME
fi
else
sim_contains_str ricsim_g1_1 remote_hosts $POLICY_AGENT_APP_NAME
sim_contains_str ricsim_g2_1 remote_hosts $POLICY_AGENT_APP_NAME
if [ "$PMS_VERSION" == "V2" ]; then
sim_contains_str ricsim_g3_1 remote_hosts $POLICY_AGENT_APP_NAME
fi
fi
check_policy_agent_logs
if [[ $interface = *"SDNC"* ]]; then
check_sdnc_logs
fi
store_logs "${__httpx}__${interface}"
done
done
#### TEST COMPLETE ####
print_result
auto_clean_environment