test/common/controller_api_functions.sh - oransc/nonrtric - Gitiles

 #!/bin/bash

 #  ============LICENSE_START===============================================
 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
 #  ========================================================================
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #  ============LICENSE_END=================================================
 #

 # This is a script that contains container/service management functions and test functions for A1 Controller API

 ################ Test engine functions ################

 # Create the image var used during the test
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __SDNC_imagesetup() {

 	sdnc_suffix_tag=$1

 	for oia_name in $ONAP_IMAGES_APP_NAMES; do
 		if [ "$oia_name" == "SDNC" ]; then
 			sdnc_suffix_tag="REMOTE_RELEASE_ONAP"
 		fi
 	done
 	__check_and_create_image_var SDNC "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_IMAGE_BASE" "SDNC_A1_CONTROLLER_IMAGE_TAG" $sdnc_suffix_tag "$SDNC_DISPLAY_NAME"
 	__check_and_create_image_var SDNC "SDNC_DB_IMAGE" "SDNC_DB_IMAGE_BASE" "SDNC_DB_IMAGE_TAG" REMOTE_PROXY "SDNC DB"

 }

 # Pull image from remote repo or use locally built image
 # arg: <pull-policy-override> <pull-policy-original>
 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
 # <pull-policy-original> Shall be used for images that does not allow overriding
 # Both var may contain: 'remote', 'remote-remove' or 'local'
 __SDNC_imagepull() {
 	__check_and_pull_image $1 "$SDNC_DISPLAY_NAME" $SDNC_APP_NAME SDNC_A1_CONTROLLER_IMAGE
 	__check_and_pull_image $2 "SDNC DB" $SDNC_APP_NAME SDNC_DB_IMAGE
 }

 # Build image (only for simulator or interfaces stubs owned by the test environment)
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __SDNC_imagebuild() {
 	echo -e $RED" Image for app SDNC shall never be built"$ERED
 }

 # Generate a string for each included image using the app display name and a docker images format string
 # If a custom image repo is used then also the source image from the local repo is listed
 # arg: <docker-images-format-string> <file-to-append>
 __SDNC_image_data() {
 	echo -e "$SDNC_DISPLAY_NAME\t$(docker images --format $1 $SDNC_A1_CONTROLLER_IMAGE)" >>   $2
 	if [ ! -z "$SDNC_A1_CONTROLLER_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $SDNC_A1_CONTROLLER_IMAGE_SOURCE)" >>   $2
 	fi
 	echo -e "SDNC DB\t$(docker images --format $1 $SDNC_DB_IMAGE)" >>   $2
 	if [ ! -z "$SDNC_DB_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $SDNC_DB_IMAGE_SOURCE)" >>   $2
 	fi
 }

 # Scale kubernetes resources to zero
 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 # This function is called for apps fully managed by the test script
 __SDNC_kube_scale_zero() {
 	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
 }

 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 # This function is called for prestarted apps not managed by the test script.
 __SDNC_kube_scale_zero_and_wait() {
 	echo -e " SDNC replicas kept as is"
 }

 # Delete all kube resouces for the app
 # This function is called for apps managed by the test script.
 __SDNC_kube_delete_all() {
 	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
 }

 # Store docker logs
 # This function is called for apps managed by the test script.
 # args: <log-dir> <file-prexix>
 __SDNC_store_docker_logs() {
 	docker exec -t $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $1$2_SDNC_karaf.log 2>&1
 }

 #######################################################


 SDNC_HTTPX="http"
 SDNC_HOST_NAME=$LOCALHOST_NAME
 SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
 SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
 #Docker/Kube internal path
 if [ $RUNMODE == "KUBE" ]; then
 	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
     #presume correct
 	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
 	#test
 	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
 else
 	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_PORT
 fi

 use_sdnc_http() {
 	echo -e $BOLD"SDNC NB protocol setting"$EBOLD
 	echo -e " Using $BOLD http $EBOLD towards SDNC"
 	SDNC_HTTPX="http"
 	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
 	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
 	if [ $RUNMODE == "KUBE" ]; then
 		#presume correct
 		SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
 		#test
 		#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
 	else
 		SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_PORT
 	fi
 	echo ""
 }

 use_sdnc_https() {
 	echo -e $BOLD"SDNC NB protocol setting"$EBOLD
 	echo -e " Using $BOLD https $EBOLD towards SDNC"
 	SDNC_HTTPX="https"
 	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT
 	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT$SDNC_API_URL
 	if [ $RUNMODE == "KUBE" ]; then
 		#presume correct
 		SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_SECURE_PORT
 		#test
 		#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_SECURE_PORT
 	else
 		SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_SECURE_PORT
 	fi
 	echo ""
 }

 ##################
 ### SDNC functions
 ##################

 # Start the SDNC A1 Controller
 # args: -
 # (Function for test scripts)
 start_sdnc() {

 	echo -e $BOLD"Starting $SDNC_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then

 		# Check if app shall be fully managed by the test script
 		__check_included_image "SDNC"
 		retcode_i=$?

 		# Check if app shall only be used by the testscipt
 		__check_prestarted_image "SDNC"
 		retcode_p=$?

 		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
 			echo -e $RED"The $SDNC_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
 			echo -e $RED"The $SDNC_APP_NAME will not be started"$ERED
 			exit
 		fi
 		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
 			echo -e $RED"The $SDNC_APP_NAME app is included both as managed and prestarted in this test script"$ERED
 			echo -e $RED"The $SDNC_APP_NAME will not be started"$ERED
 			exit
 		fi


 		if [ $retcode_p -eq 0 ]; then
 			echo -e " Using existing $SDNC_APP_NAME deployment and service"
 			echo " Setting SDNC replicas=1"
 			__kube_scale deployment $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
 		fi

 				# Check if app shall be fully managed by the test script
 		if [ $retcode_i -eq 0 ]; then

 			echo -e " Creating $SDNC_APP_NAME app and expose service"

 			#Check if nonrtric namespace exists, if not create it
 			__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

 			export KUBE_NONRTRIC_NAMESPACE
 			export SDNC_APP_NAME
 			export SDNC_A1_CONTROLLER_IMAGE
 			export SDNC_INTERNAL_PORT
 			export SDNC_EXTERNAL_PORT
 			export SDNC_INTERNAL_SECURE_PORT
 			export SDNC_EXTERNAL_SECURE_PORT
 			export SDNC_A1_TRUSTSTORE_PASSWORD
 			export SDNC_DB_APP_NAME
 			export SDNC_DB_IMAGE
 			export SDNC_USER
 			export SDNC_PWD

 			# Create service
 			input_yaml=$SIM_GROUP"/"$SDNC_COMPOSE_DIR"/"svc.yaml
 			output_yaml=$PWD/tmp/sdnc_svc.yaml
 			__kube_create_instance service $SDNC_APP_NAME $input_yaml $output_yaml

 			# Create app
 			input_yaml=$SIM_GROUP"/"$SDNC_COMPOSE_DIR"/"$SDNC_KUBE_APP_FILE
 			output_yaml=$PWD/tmp/sdnc_app.yaml
 			__kube_create_instance app $SDNC_APP_NAME $input_yaml $output_yaml

 		fi

         echo " Retrieving host and ports for service..."
 		SDNC_HOST_NAME=$(__kube_get_service_host $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
 		SDNC_EXTERNAL_PORT=$(__kube_get_service_port $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http")
 		SDNC_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https")

 		echo " Host IP, http port, https port: $SDNC_HOST_NAME $SDNC_EXTERNAL_PORT $SDNC_EXTERNAL_SECURE_PORT"

         if [ $SDNC_HTTPX == "http" ]; then
 			SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
 			SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
             #presume correct
 			SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
 			#test
 			#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
 		else
 			SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT
 			SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT$SDNC_API_URL
             #presume correct
 			SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_SECURE_PORT
 			#test
 			#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_SECURE_PORT
 		fi

 		__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
 	else

 		__check_included_image 'SDNC'
 		if [ $? -eq 1 ]; then
 			echo -e $RED"The SDNC A1 Controller app is not included in this test script"$ERED
 			echo -e $RED"The Policy Agent will not be started"$ERED
 			exit
 		fi

 		export SDNC_DB_APP_NAME
         export SDNC_APP_NAME
         export SDNC_INTERNAL_PORT
         export SDNC_EXTERNAL_PORT
         export SDNC_INTERNAL_SECURE_PORT
         export SDNC_EXTERNAL_SECURE_PORT
         export SDNC_A1_TRUSTSTORE_PASSWORD
         export DOCKER_SIM_NWNAME
 		export SDNC_DISPLAY_NAME
 		export SDNC_USER
 		export SDNC_PWD

 		__start_container $SDNC_COMPOSE_DIR $SDNC_COMPOSE_FILE NODOCKERARGS 1 $SDNC_APP_NAME

 		__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
 	fi
     echo ""
     return 0
 }


 # Stop the sndc
 # args: -
 # args: -
 # (Function for test scripts)
 stop_sdnc() {
 	echo -e $BOLD"Stopping $SDNC_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then
 		__log_conf_fail_not_supported " Cannot stop sndc in KUBE mode"
 		return 1
 	else
 		docker stop $SDNC_APP_NAME &> ./tmp/.dockererr
 		if [ $? -ne 0 ]; then
 			__print_err "Could not stop $SDNC_APP_NAME" $@
 			cat ./tmp/.dockererr
 			((RES_CONF_FAIL++))
 			return 1
 		fi
 	fi
 	echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
 	echo ""
 	return 0
 }

 # Start a previously stopped sdnc
 # args: -
 # (Function for test scripts)
 start_stopped_sdnc() {
 	echo -e $BOLD"Starting (the previously stopped) $SDNC_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then
 		__log_conf_fail_not_supported " Cannot restart sndc in KUBE mode"
 		return 1
 	else
 		docker start $SDNC_APP_NAME &> ./tmp/.dockererr
 		if [ $? -ne 0 ]; then
 			__print_err "Could not start (the stopped) $SDNC_APP_NAME" $@
 			cat ./tmp/.dockererr
 			((RES_CONF_FAIL++))
 			return 1
 		fi
 	fi
 	__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
 	if [ $? -ne 0 ]; then
 		return 1
 	fi
 	echo ""
 	return 0
 }

 # Check the agent logs for WARNINGs and ERRORs
 # args: -
 # (Function for test scripts)
 check_sdnc_logs() {
 	__check_container_logs "SDNC A1 Controller" $SDNC_APP_NAME $SDNC_KARAF_LOG WARN ERROR
 }

 # Generic function to query the RICs via the A1-controller API.
 # args: <operation> <url> [<body>]
 # <operation>: getA1Policy,putA1Policy,getA1PolicyType,deleteA1Policy,getA1PolicyStatus
 # response: <json-body><3-digit-response-code>
 # (Not for test scripts)
 __do_curl_to_controller() {
     echo " (${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
     if [ $# -ne 2 ] && [ $# -ne 3 ]; then
 		((RES_CONF_FAIL++))
         echo "-Incorrect number of parameters to __do_curl_to_controller " $@ >> $HTTPLOG
         echo "-Expected: <operation> <url> [<body>]" >> $HTTPLOG
         echo "-Returning response 000" >> $HTTPLOG
         echo "000"
         return 1
     fi
     if [ $# -eq 2 ]; then
         json='{"input":{"near-rt-ric-url":"'$2'"}}'
     else
         # Escape quotes in the body
         body=$(echo "$3" | sed 's/"/\\"/g')
         json='{"input":{"near-rt-ric-url":"'$2'","body":"'"$body"'"}}'
     fi
 	payload="./tmp/.sdnc.payload.json"
     echo "$json" > $payload
     echo "  FILE ($payload) : $json"  >> $HTTPLOG
 	proxyflag=""
 	if [ $RUNMODE == "KUBE" ]; then
 		if [ ! -z "$KUBE_PROXY_PATH" ]; then
 			if [ $KUBE_PROXY_HTTPX == "http" ]; then
 				proxyflag=" --proxy $KUBE_PROXY_PATH"
 			else
 				proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
 			fi
 		fi
 	fi
     curlString="curl -skw %{http_code} $proxyflag -X POST $SDNC_API_PATH$1 -H accept:application/json -H Content-Type:application/json --data-binary @$payload"
     echo "  CMD: "$curlString >> $HTTPLOG
     res=$($curlString)
     retcode=$?
     echo "  RESP: "$res >> $HTTPLOG
     if [ $retcode -ne 0 ]; then
         echo "  RETCODE: "$retcode >> $HTTPLOG
         echo "000"
         return 1
     fi

 	status=${res:${#res}-3}

     if [ $status -ne 200 ]; then
         echo "000"
         return 1
     fi
     body=${res:0:${#res}-3}
 	echo "  JSON: "$body >> $HTTPLOG
 	reply="./tmp/.sdnc-reply.json"
     echo "$body" > $reply
     res=$(python3 ../common/extract_sdnc_reply.py $SDNC_RESPONSE_JSON_KEY $reply)
     echo "  EXTRACED BODY+CODE: "$res >> $HTTPLOG
     echo "$res"
     return 0
 }

 # Controller API Test function: getA1Policy (return ids only)
 # arg: <response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) | ( STD <ric-id> [ <policy-id> [<policy-id>]* ] )
 # (Function for test scripts)
 controller_api_get_A1_policy_ids() {
 	__log_test_start $@

 	ric_id=$3
 	if [ $RUNMODE == "KUBE" ]; then
 		ric_id=$(get_kube_sim_host $3)
 	fi
     paramError=1
     if [ $# -gt 3 ] && [ $2 == "OSC" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies"
 		paramError=0
     elif [ $# -gt 2 ] && [ $2 == "STD" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies"
         paramError=0
 	fi

     if [ $paramError -ne 0 ]; then
 		__print_err "<response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) | ( STD <ric-id> [ <policy-id> [<policy-id>]* ] )" $@
 		return 1
 	fi

     res=$(__do_curl_to_controller getA1Policy "$url")
     retcode=$?
     status=${res:${#res}-3}

     if [ $retcode -ne 0 ]; then
 		__log_test_fail_status_code $1 $retcode "(likely remote server error)"
 		return 1
 	fi

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
     body=${res:0:${#res}-3}

 	targetJson="["
     start=4
     if [ $2 == "OSC" ]; then
         start=5
     fi
     for pid in ${@:$start} ; do
         if [ "$targetJson" != "[" ]; then
             targetJson=$targetJson","
         fi
         targetJson=$targetJson"\"$UUID$pid\""
     done
     targetJson=$targetJson"]"

 	echo " TARGET JSON: $targetJson" >> $HTTPLOG

 	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 	if [ $res -ne 0 ]; then
 		__log_test_fail_body
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }


 # Controller API Test function: getA1PolicyType
 # arg: <response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]
 # (Function for test scripts)
 controller_api_get_A1_policy_type() {
 	__log_test_start $@

 	ric_id=$3
 	if [ $RUNMODE == "KUBE" ]; then
 		ric_id=$(get_kube_sim_host $3)
 	fi
     paramError=1
     if [ $# -gt 3 ] && [ $2 == "OSC" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4"
 		paramError=0
 	fi

     if [ $paramError -ne 0 ]; then
 		__print_err "<response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]" $@
 		return 1
 	fi

     res=$(__do_curl_to_controller getA1PolicyType "$url")
     retcode=$?
     status=${res:${#res}-3}

     if [ $retcode -ne 0 ]; then
 		__log_test_fail_status_code $1 $retcode "(likely remote server error)"
 		return 1
 	fi

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi
     body=${res:0:${#res}-3}

 	if [ $# -eq 5 ]; then

 		body=${res:0:${#res}-3}

 		targetJson=$(< $5)
 		echo " TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi

 	__log_test_pass
 	return 0
 }

 # Controller API Test function: deleteA1Policy
 # arg: <response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>)
 # (Function for test scripts)
 controller_api_delete_A1_policy() {
 	__log_test_start $@

 	ric_id=$3
 	if [ $RUNMODE == "KUBE" ]; then
 		ric_id=$(get_kube_sim_host $3)
 	fi
     paramError=1
     if [ $# -eq 5 ] && [ $2 == "OSC" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5"
 		paramError=0
     elif [ $# -eq 4 ] && [ $2 == "STD" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4"
         paramError=0
 	fi

     if [ $paramError -ne 0 ]; then
 		__print_err "<response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>)" $@
 		return 1
 	fi

     res=$(__do_curl_to_controller deleteA1Policy "$url")
     retcode=$?
     status=${res:${#res}-3}

     if [ $retcode -ne 0 ]; then
 		__log_test_fail_status_code $1 $retcode "(likely remote server error)"
 		return 1
 	fi

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # Controller API Test function: putA1Policy
 # arg: <response-code> (STD <ric-id> <policy-id> <template-file> ) | (OSC <ric-id> <policy-type-id> <policy-id> <template-file>)
 # (Function for test scripts)
 controller_api_put_A1_policy() {
 	__log_test_start $@

 	ric_id=$3
 	if [ $RUNMODE == "KUBE" ]; then
 		ric_id=$(get_kube_sim_host $3)
 	fi
     paramError=1
     if [ $# -eq 6 ] && [ $2 == "OSC" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5"
         body=$(sed 's/XXX/'${5}'/g' $6)

 		paramError=0
     elif [ $# -eq 5 ] && [ $2 == "STD" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4"
         body=$(sed 's/XXX/'${4}'/g' $5)
         paramError=0
 	fi

     if [ $paramError -ne 0 ]; then
 		__print_err "<response-code> (STD <ric-id> <policy-id>) | (OSC <ric-id> <policy-type-id> <policy-id>)" $@
 		return 1
 	fi

     res=$(__do_curl_to_controller putA1Policy "$url" "$body")
     retcode=$?
     status=${res:${#res}-3}

     if [ $retcode -ne 0 ]; then
 		__log_test_fail_status_code $1 $retcode "(likely remote server error)"
 		return 1
 	fi

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }


 # Controller API Test function: getA1PolicyStatus
 # arg: <response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) | (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)
 # (Function for test scripts)
 controller_api_get_A1_policy_status() {
 	__log_test_start $@

 	ric_id=$3
 	if [ $RUNMODE == "KUBE" ]; then
 		ric_id=$(get_kube_sim_host $3)
 	fi
     targetJson=""
     paramError=1
     if [ $# -ge 5 ] && [ $2 == "OSC" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5/status"
         if [ $# -gt 5 ]; then
             targetJson="{\"instance_status\":\"$6\""
             targetJson=$targetJson",\"has_been_deleted\":\"$7\""
             targetJson=$targetJson",\"created_at\":\"????\"}"
         fi
 		paramError=0
     elif [ $# -ge 4 ] && [ $2 == "STD" ]; then
         url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4/status"
         if [ $# -gt 4 ]; then
             targetJson="{\"enforceStatus\":\"$5\""
             if [ $# -eq 6 ]; then
                 targetJson=$targetJson",\"reason\":\"$6\""
             fi
             targetJson=$targetJson"}"
         fi
         paramError=0
 	fi

     if [ $paramError -ne 0 ]; then
 		__print_err "<response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) | (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)" $@
 		return 1
 	fi

     res=$(__do_curl_to_controller getA1PolicyStatus "$url")
     retcode=$?
     status=${res:${#res}-3}

     if [ $retcode -ne 0 ]; then
 		__log_test_fail_status_code $1 $retcode "(likely remote server error)"
 		return 1
 	fi

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	if [ ! -z "$targetJson" ]; then

 		body=${res:0:${#res}-3}
 		echo " TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi

 	__log_test_pass
 	return 0
 }
	#!/bin/bash

	# ============LICENSE_START===============================================
	# Copyright (C) 2020 Nordix Foundation. All rights reserved.
	# ========================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=================================================
	#

	# This is a script that contains container/service management functions and test functions for A1 Controller API

	################ Test engine functions ################

	# Create the image var used during the test
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__SDNC_imagesetup() {

	sdnc_suffix_tag=$1

	for oia_name in $ONAP_IMAGES_APP_NAMES; do
	if [ "$oia_name" == "SDNC" ]; then
	sdnc_suffix_tag="REMOTE_RELEASE_ONAP"
	fi
	done
	__check_and_create_image_var SDNC "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_IMAGE_BASE" "SDNC_A1_CONTROLLER_IMAGE_TAG" $sdnc_suffix_tag "$SDNC_DISPLAY_NAME"
	__check_and_create_image_var SDNC "SDNC_DB_IMAGE" "SDNC_DB_IMAGE_BASE" "SDNC_DB_IMAGE_TAG" REMOTE_PROXY "SDNC DB"

	}

	# Pull image from remote repo or use locally built image
	# arg: <pull-policy-override> <pull-policy-original>
	# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
	# <pull-policy-original> Shall be used for images that does not allow overriding
	# Both var may contain: 'remote', 'remote-remove' or 'local'
	__SDNC_imagepull() {
	__check_and_pull_image $1 "$SDNC_DISPLAY_NAME" $SDNC_APP_NAME SDNC_A1_CONTROLLER_IMAGE
	__check_and_pull_image $2 "SDNC DB" $SDNC_APP_NAME SDNC_DB_IMAGE
	}

	# Build image (only for simulator or interfaces stubs owned by the test environment)
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__SDNC_imagebuild() {
	echo -e $RED" Image for app SDNC shall never be built"$ERED
	}

	# Generate a string for each included image using the app display name and a docker images format string
	# If a custom image repo is used then also the source image from the local repo is listed
	# arg: <docker-images-format-string> <file-to-append>
	__SDNC_image_data() {
	echo -e "$SDNC_DISPLAY_NAME\t$(docker images --format $1 $SDNC_A1_CONTROLLER_IMAGE)" >> $2
	if [ ! -z "$SDNC_A1_CONTROLLER_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $SDNC_A1_CONTROLLER_IMAGE_SOURCE)" >> $2
	fi
	echo -e "SDNC DB\t$(docker images --format $1 $SDNC_DB_IMAGE)" >> $2
	if [ ! -z "$SDNC_DB_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $SDNC_DB_IMAGE_SOURCE)" >> $2
	fi
	}

	# Scale kubernetes resources to zero
	# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
	# This function is called for apps fully managed by the test script
	__SDNC_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
	}

	# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
	# This function is called for prestarted apps not managed by the test script.
	__SDNC_kube_scale_zero_and_wait() {
	echo -e " SDNC replicas kept as is"
	}

	# Delete all kube resouces for the app
	# This function is called for apps managed by the test script.
	__SDNC_kube_delete_all() {
	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
	}

	# Store docker logs
	# This function is called for apps managed by the test script.
	# args: <log-dir> <file-prexix>
	__SDNC_store_docker_logs() {
	docker exec -t $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $1$2_SDNC_karaf.log 2>&1
	}

	#######################################################


	SDNC_HTTPX="http"
	SDNC_HOST_NAME=$LOCALHOST_NAME
	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
	#Docker/Kube internal path
	if [ $RUNMODE == "KUBE" ]; then
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
	#presume correct
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
	#test
	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
	else
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_PORT
	fi

	use_sdnc_http() {
	echo -e $BOLD"SDNC NB protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD towards SDNC"
	SDNC_HTTPX="http"
	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
	if [ $RUNMODE == "KUBE" ]; then
	#presume correct
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
	#test
	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
	else
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_PORT
	fi
	echo ""
	}

	use_sdnc_https() {
	echo -e $BOLD"SDNC NB protocol setting"$EBOLD
	echo -e " Using $BOLD https $EBOLD towards SDNC"
	SDNC_HTTPX="https"
	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT
	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT$SDNC_API_URL
	if [ $RUNMODE == "KUBE" ]; then
	#presume correct
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_SECURE_PORT
	#test
	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_SECURE_PORT
	else
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_INTERNAL_SECURE_PORT
	fi
	echo ""
	}

	##################
	### SDNC functions
	##################

	# Start the SDNC A1 Controller
	# args: -
	# (Function for test scripts)
	start_sdnc() {

	echo -e $BOLD"Starting $SDNC_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

	# Check if app shall be fully managed by the test script
	__check_included_image "SDNC"
	retcode_i=$?

	# Check if app shall only be used by the testscipt
	__check_prestarted_image "SDNC"
	retcode_p=$?

	if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
	echo -e $RED"The $SDNC_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
	echo -e $RED"The $SDNC_APP_NAME will not be started"$ERED
	exit
	fi
	if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
	echo -e $RED"The $SDNC_APP_NAME app is included both as managed and prestarted in this test script"$ERED
	echo -e $RED"The $SDNC_APP_NAME will not be started"$ERED
	exit
	fi


	if [ $retcode_p -eq 0 ]; then
	echo -e " Using existing $SDNC_APP_NAME deployment and service"
	echo " Setting SDNC replicas=1"
	__kube_scale deployment $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
	fi

	# Check if app shall be fully managed by the test script
	if [ $retcode_i -eq 0 ]; then

	echo -e " Creating $SDNC_APP_NAME app and expose service"

	#Check if nonrtric namespace exists, if not create it
	__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

	export KUBE_NONRTRIC_NAMESPACE
	export SDNC_APP_NAME
	export SDNC_A1_CONTROLLER_IMAGE
	export SDNC_INTERNAL_PORT
	export SDNC_EXTERNAL_PORT
	export SDNC_INTERNAL_SECURE_PORT
	export SDNC_EXTERNAL_SECURE_PORT
	export SDNC_A1_TRUSTSTORE_PASSWORD
	export SDNC_DB_APP_NAME
	export SDNC_DB_IMAGE
	export SDNC_USER
	export SDNC_PWD

	# Create service
	input_yaml=$SIM_GROUP"/"$SDNC_COMPOSE_DIR"/"svc.yaml
	output_yaml=$PWD/tmp/sdnc_svc.yaml
	__kube_create_instance service $SDNC_APP_NAME $input_yaml $output_yaml

	# Create app
	input_yaml=$SIM_GROUP"/"$SDNC_COMPOSE_DIR"/"$SDNC_KUBE_APP_FILE
	output_yaml=$PWD/tmp/sdnc_app.yaml
	__kube_create_instance app $SDNC_APP_NAME $input_yaml $output_yaml

	fi

	echo " Retrieving host and ports for service..."
	SDNC_HOST_NAME=$(__kube_get_service_host $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
	SDNC_EXTERNAL_PORT=$(__kube_get_service_port $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http")
	SDNC_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $SDNC_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https")

	echo " Host IP, http port, https port: $SDNC_HOST_NAME $SDNC_EXTERNAL_PORT $SDNC_EXTERNAL_SECURE_PORT"

	if [ $SDNC_HTTPX == "http" ]; then
	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT
	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_PORT$SDNC_API_URL
	#presume correct
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_PORT
	#test
	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_PORT
	else
	SDNC_PATH=$SDNC_HTTPX"://"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT
	SDNC_API_PATH=$SDNC_HTTPX"://"$SDNC_USER":"$SDNC_PWD"@"$SDNC_HOST_NAME":"$SDNC_EXTERNAL_SECURE_PORT$SDNC_API_URL
	#presume correct
	SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME"."$KUBE_NONRTRIC_NAMESPACE":"$SDNC_EXTERNAL_SECURE_PORT
	#test
	#SDNC_SERVICE_PATH=$SDNC_HTTPX"://"$SDNC_APP_NAME":"$SDNC_EXTERNAL_SECURE_PORT
	fi

	__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
	else

	__check_included_image 'SDNC'
	if [ $? -eq 1 ]; then
	echo -e $RED"The SDNC A1 Controller app is not included in this test script"$ERED
	echo -e $RED"The Policy Agent will not be started"$ERED
	exit
	fi

	export SDNC_DB_APP_NAME
	export SDNC_APP_NAME
	export SDNC_INTERNAL_PORT
	export SDNC_EXTERNAL_PORT
	export SDNC_INTERNAL_SECURE_PORT
	export SDNC_EXTERNAL_SECURE_PORT
	export SDNC_A1_TRUSTSTORE_PASSWORD
	export DOCKER_SIM_NWNAME
	export SDNC_DISPLAY_NAME
	export SDNC_USER
	export SDNC_PWD

	__start_container $SDNC_COMPOSE_DIR $SDNC_COMPOSE_FILE NODOCKERARGS 1 $SDNC_APP_NAME

	__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
	fi
	echo ""
	return 0
	}


	# Stop the sndc
	# args: -
	# args: -
	# (Function for test scripts)
	stop_sdnc() {
	echo -e $BOLD"Stopping $SDNC_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then
	__log_conf_fail_not_supported " Cannot stop sndc in KUBE mode"
	return 1
	else
	docker stop $SDNC_APP_NAME &> ./tmp/.dockererr
	if [ $? -ne 0 ]; then
	__print_err "Could not stop $SDNC_APP_NAME" $@
	cat ./tmp/.dockererr
	((RES_CONF_FAIL++))
	return 1
	fi
	fi
	echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
	echo ""
	return 0
	}

	# Start a previously stopped sdnc
	# args: -
	# (Function for test scripts)
	start_stopped_sdnc() {
	echo -e $BOLD"Starting (the previously stopped) $SDNC_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then
	__log_conf_fail_not_supported " Cannot restart sndc in KUBE mode"
	return 1
	else
	docker start $SDNC_APP_NAME &> ./tmp/.dockererr
	if [ $? -ne 0 ]; then
	__print_err "Could not start (the stopped) $SDNC_APP_NAME" $@
	cat ./tmp/.dockererr
	((RES_CONF_FAIL++))
	return 1
	fi
	fi
	__check_service_start $SDNC_APP_NAME $SDNC_PATH$SDNC_ALIVE_URL
	if [ $? -ne 0 ]; then
	return 1
	fi
	echo ""
	return 0
	}

	# Check the agent logs for WARNINGs and ERRORs
	# args: -
	# (Function for test scripts)
	check_sdnc_logs() {
	__check_container_logs "SDNC A1 Controller" $SDNC_APP_NAME $SDNC_KARAF_LOG WARN ERROR
	}

	# Generic function to query the RICs via the A1-controller API.
	# args: <operation> <url> [<body>]
	# <operation>: getA1Policy,putA1Policy,getA1PolicyType,deleteA1Policy,getA1PolicyStatus
	# response: <json-body><3-digit-response-code>
	# (Not for test scripts)
	__do_curl_to_controller() {
	echo " (${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
	if [ $# -ne 2 ] && [ $# -ne 3 ]; then
	((RES_CONF_FAIL++))
	echo "-Incorrect number of parameters to __do_curl_to_controller " $@ >> $HTTPLOG
	echo "-Expected: <operation> <url> [<body>]" >> $HTTPLOG
	echo "-Returning response 000" >> $HTTPLOG
	echo "000"
	return 1
	fi
	if [ $# -eq 2 ]; then
	json='{"input":{"near-rt-ric-url":"'$2'"}}'
	else
	# Escape quotes in the body
	body=$(echo "$3" \| sed 's/"/\\"/g')
	json='{"input":{"near-rt-ric-url":"'$2'","body":"'"$body"'"}}'
	fi
	payload="./tmp/.sdnc.payload.json"
	echo "$json" > $payload
	echo " FILE ($payload) : $json" >> $HTTPLOG
	proxyflag=""
	if [ $RUNMODE == "KUBE" ]; then
	if [ ! -z "$KUBE_PROXY_PATH" ]; then
	if [ $KUBE_PROXY_HTTPX == "http" ]; then
	proxyflag=" --proxy $KUBE_PROXY_PATH"
	else
	proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
	fi
	fi
	fi
	curlString="curl -skw %{http_code} $proxyflag -X POST $SDNC_API_PATH$1 -H accept:application/json -H Content-Type:application/json --data-binary @$payload"
	echo " CMD: "$curlString >> $HTTPLOG
	res=$($curlString)
	retcode=$?
	echo " RESP: "$res >> $HTTPLOG
	if [ $retcode -ne 0 ]; then
	echo " RETCODE: "$retcode >> $HTTPLOG
	echo "000"
	return 1
	fi

	status=${res:${#res}-3}

	if [ $status -ne 200 ]; then
	echo "000"
	return 1
	fi
	body=${res:0:${#res}-3}
	echo " JSON: "$body >> $HTTPLOG
	reply="./tmp/.sdnc-reply.json"
	echo "$body" > $reply
	res=$(python3 ../common/extract_sdnc_reply.py $SDNC_RESPONSE_JSON_KEY $reply)
	echo " EXTRACED BODY+CODE: "$res >> $HTTPLOG
	echo "$res"
	return 0
	}

	# Controller API Test function: getA1Policy (return ids only)
	# arg: <response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) \| ( STD <ric-id> [ <policy-id> [<policy-id>]* ] )
	# (Function for test scripts)
	controller_api_get_A1_policy_ids() {
	__log_test_start $@

	ric_id=$3
	if [ $RUNMODE == "KUBE" ]; then
	ric_id=$(get_kube_sim_host $3)
	fi
	paramError=1
	if [ $# -gt 3 ] && [ $2 == "OSC" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies"
	paramError=0
	elif [ $# -gt 2 ] && [ $2 == "STD" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies"
	paramError=0
	fi

	if [ $paramError -ne 0 ]; then
	__print_err "<response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) \| ( STD <ric-id> [ <policy-id> [<policy-id>]* ] )" $@
	return 1
	fi

	res=$(__do_curl_to_controller getA1Policy "$url")
	retcode=$?
	status=${res:${#res}-3}

	if [ $retcode -ne 0 ]; then
	__log_test_fail_status_code $1 $retcode "(likely remote server error)"
	return 1
	fi

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}

	targetJson="["
	start=4
	if [ $2 == "OSC" ]; then
	start=5
	fi
	for pid in ${@:$start} ; do
	if [ "$targetJson" != "[" ]; then
	targetJson=$targetJson","
	fi
	targetJson=$targetJson"\"$UUID$pid\""
	done
	targetJson=$targetJson"]"

	echo " TARGET JSON: $targetJson" >> $HTTPLOG

	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi

	__log_test_pass
	return 0
	}


	# Controller API Test function: getA1PolicyType
	# arg: <response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]
	# (Function for test scripts)
	controller_api_get_A1_policy_type() {
	__log_test_start $@

	ric_id=$3
	if [ $RUNMODE == "KUBE" ]; then
	ric_id=$(get_kube_sim_host $3)
	fi
	paramError=1
	if [ $# -gt 3 ] && [ $2 == "OSC" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4"
	paramError=0
	fi

	if [ $paramError -ne 0 ]; then
	__print_err "<response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]" $@
	return 1
	fi

	res=$(__do_curl_to_controller getA1PolicyType "$url")
	retcode=$?
	status=${res:${#res}-3}

	if [ $retcode -ne 0 ]; then
	__log_test_fail_status_code $1 $retcode "(likely remote server error)"
	return 1
	fi

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi
	body=${res:0:${#res}-3}

	if [ $# -eq 5 ]; then

	body=${res:0:${#res}-3}

	targetJson=$(< $5)
	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi

	__log_test_pass
	return 0
	}

	# Controller API Test function: deleteA1Policy
	# arg: <response-code> (STD <ric-id> <policy-id>) \| (OSC <ric-id> <policy-type-id> <policy-id>)
	# (Function for test scripts)
	controller_api_delete_A1_policy() {
	__log_test_start $@

	ric_id=$3
	if [ $RUNMODE == "KUBE" ]; then
	ric_id=$(get_kube_sim_host $3)
	fi
	paramError=1
	if [ $# -eq 5 ] && [ $2 == "OSC" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5"
	paramError=0
	elif [ $# -eq 4 ] && [ $2 == "STD" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4"
	paramError=0
	fi

	if [ $paramError -ne 0 ]; then
	__print_err "<response-code> (STD <ric-id> <policy-id>) \| (OSC <ric-id> <policy-type-id> <policy-id>)" $@
	return 1
	fi

	res=$(__do_curl_to_controller deleteA1Policy "$url")
	retcode=$?
	status=${res:${#res}-3}

	if [ $retcode -ne 0 ]; then
	__log_test_fail_status_code $1 $retcode "(likely remote server error)"
	return 1
	fi

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# Controller API Test function: putA1Policy
	# arg: <response-code> (STD <ric-id> <policy-id> <template-file> ) \| (OSC <ric-id> <policy-type-id> <policy-id> <template-file>)
	# (Function for test scripts)
	controller_api_put_A1_policy() {
	__log_test_start $@

	ric_id=$3
	if [ $RUNMODE == "KUBE" ]; then
	ric_id=$(get_kube_sim_host $3)
	fi
	paramError=1
	if [ $# -eq 6 ] && [ $2 == "OSC" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5"
	body=$(sed 's/XXX/'${5}'/g' $6)

	paramError=0
	elif [ $# -eq 5 ] && [ $2 == "STD" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4"
	body=$(sed 's/XXX/'${4}'/g' $5)
	paramError=0
	fi

	if [ $paramError -ne 0 ]; then
	__print_err "<response-code> (STD <ric-id> <policy-id>) \| (OSC <ric-id> <policy-type-id> <policy-id>)" $@
	return 1
	fi

	res=$(__do_curl_to_controller putA1Policy "$url" "$body")
	retcode=$?
	status=${res:${#res}-3}

	if [ $retcode -ne 0 ]; then
	__log_test_fail_status_code $1 $retcode "(likely remote server error)"
	return 1
	fi

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}


	# Controller API Test function: getA1PolicyStatus
	# arg: <response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) \| (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)
	# (Function for test scripts)
	controller_api_get_A1_policy_status() {
	__log_test_start $@

	ric_id=$3
	if [ $RUNMODE == "KUBE" ]; then
	ric_id=$(get_kube_sim_host $3)
	fi
	targetJson=""
	paramError=1
	if [ $# -ge 5 ] && [ $2 == "OSC" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/a1-p/policytypes/$4/policies/$UUID$5/status"
	if [ $# -gt 5 ]; then
	targetJson="{\"instance_status\":\"$6\""
	targetJson=$targetJson",\"has_been_deleted\":\"$7\""
	targetJson=$targetJson",\"created_at\":\"????\"}"
	fi
	paramError=0
	elif [ $# -ge 4 ] && [ $2 == "STD" ]; then
	url="$RIC_SIM_HTTPX://$ric_id:$RIC_SIM_PORT/A1-P/v1/policies/$UUID$4/status"
	if [ $# -gt 4 ]; then
	targetJson="{\"enforceStatus\":\"$5\""
	if [ $# -eq 6 ]; then
	targetJson=$targetJson",\"reason\":\"$6\""
	fi
	targetJson=$targetJson"}"
	fi
	paramError=0
	fi

	if [ $paramError -ne 0 ]; then
	__print_err "<response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) \| (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)" $@
	return 1
	fi

	res=$(__do_curl_to_controller getA1PolicyStatus "$url")
	retcode=$?
	status=${res:${#res}-3}

	if [ $retcode -ne 0 ]; then
	__log_test_fail_status_code $1 $retcode "(likely remote server error)"
	return 1
	fi

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	if [ ! -z "$targetJson" ]; then

	body=${res:0:${#res}-3}
	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi

	__log_test_pass
	return 0
	}