blob: 805fae4c93d94819e7a77f109ffd633ee3ea8f43 [file] [log] [blame]
#!/bin/bash
# ============LICENSE_START===============================================
# Copyright (C) 2020 Nordix Foundation. All rights reserved.
# ========================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END=================================================
#
# This is a script that contains container/service management functions and test functions for ECS
################ Test engine functions ################
# Create the image var used during the test
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__ECS_imagesetup() {
__check_and_create_image_var ECS "ECS_IMAGE" "ECS_IMAGE_BASE" "ECS_IMAGE_TAG" $1 "$ECS_DISPLAY_NAME"
}
# Pull image from remote repo or use locally built image
# arg: <pull-policy-override> <pull-policy-original>
# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__ECS_imagepull() {
__check_and_pull_image $1 "$ECS_DISPLAY_NAME" $ECS_APP_NAME ECS_IMAGE
}
# Build image (only for simulator or interfaces stubs owned by the test environment)
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__ECS_imagebuild() {
echo -e $RED" Image for app ECS shall never be built"$ERED
}
# Generate a string for each included image using the app display name and a docker images format string
# If a custom image repo is used then also the source image from the local repo is listed
# arg: <docker-images-format-string> <file-to-append>
__ECS_image_data() {
echo -e "$ECS_DISPLAY_NAME\t$(docker images --format $1 $ECS_IMAGE)" >> $2
if [ ! -z "$ECS_IMAGE_SOURCE" ]; then
echo -e "-- source image --\t$(docker images --format $1 $ECS_IMAGE_SOURCE)" >> $2
fi
}
# Scale kubernetes resources to zero
# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
# This function is called for apps fully managed by the test script
__ECS_kube_scale_zero() {
__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest ECS
}
# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
# This function is called for prestarted apps not managed by the test script.
__ECS_kube_scale_zero_and_wait() {
__kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app nonrtric-enrichmentservice
}
# Delete all kube resouces for the app
# This function is called for apps managed by the test script.
__ECS_kube_delete_all() {
__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest ECS
}
# Store docker logs
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prexix>
__ECS_store_docker_logs() {
docker logs $ECS_APP_NAME > $1$2_ecs.log 2>&1
}
#######################################################
## Access to ECS
# Host name may be changed if app started by kube
# Direct access
ECS_HTTPX="http"
ECS_HOST_NAME=$LOCALHOST_NAME
ECS_PATH=$ECS_HTTPX"://"$ECS_HOST_NAME":"$ECS_EXTERNAL_PORT
# ECS_ADAPTER used for switch between REST and DMAAP (only REST supported currently)
ECS_ADAPTER_TYPE="REST"
ECS_ADAPTER=$ECS_PATH
# Make curl retries towards ECS for http response codes set in this env var, space separated list of codes
ECS_RETRY_CODES=""
#Save first worker node the pod is started on
__ECS_WORKER_NODE=""
###########################
### ECS functions
###########################
# All calls to ECS will be directed to the ECS REST interface from now on
# args: -
# (Function for test scripts)
use_ecs_rest_http() {
echo -e $BOLD"ECS protocol setting"$EBOLD
echo -e " Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
ECS_HTTPX="http"
ECS_PATH=$ECS_HTTPX"://"$ECS_HOST_NAME":"$ECS_EXTERNAL_PORT
ECS_ADAPTER_TYPE="REST"
ECS_ADAPTER=$ECS_PATH
echo ""
}
# All calls to ECS will be directed to the ECS REST interface from now on
# args: -
# (Function for test scripts)
use_ecs_rest_https() {
echo -e $BOLD"ECS protocol setting"$EBOLD
echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
ECS_HTTPX="https"
ECS_PATH=$ECS_HTTPX"://"$ECS_HOST_NAME":"$ECS_EXTERNAL_SECURE_PORT
ECS_ADAPTER_TYPE="REST"
ECS_ADAPTER=$ECS_PATH
echo ""
}
# All calls to ECS will be directed to the ECS dmaap interface over http from now on
# args: -
# (Function for test scripts)
use_ecs_dmaap_http() {
echo -e $BOLD"ECS dmaap protocol setting"$EBOLD
echo -e $RED" - NOT SUPPORTED - "$ERED
echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
ECS_ADAPTER_TYPE="MR-HTTP"
echo ""
}
# All calls to ECS will be directed to the ECS dmaap interface over https from now on
# args: -
# (Function for test scripts)
use_ecs_dmaap_https() {
echo -e $BOLD"RICSIM protocol setting"$EBOLD
echo -e $RED" - NOT SUPPORTED - "$ERED
echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
ECS_ADAPTER_TYPE="MR-HTTPS"
echo ""
}
# Start the ECS
# args: PROXY|NOPROXY <config-file>
# (Function for test scripts)
start_ecs() {
echo -e $BOLD"Starting $ECS_DISPLAY_NAME"$EBOLD
if [ $RUNMODE == "KUBE" ]; then
# Check if app shall be fully managed by the test script
__check_included_image "ECS"
retcode_i=$?
# Check if app shall only be used by the testscipt
__check_prestarted_image "ECS"
retcode_p=$?
if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
echo -e $RED"The $ECS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
echo -e $RED"The $ECS_APP_NAME will not be started"$ERED
exit
fi
if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
echo -e $RED"The $ECS_APP_NAME app is included both as managed and prestarted in this test script"$ERED
echo -e $RED"The $ECS_APP_NAME will not be started"$ERED
exit
fi
if [ $retcode_p -eq 0 ]; then
echo -e " Using existing $ECS_APP_NAME deployment and service"
echo " Setting ECS replicas=1"
res_type=$(__kube_get_resource_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
__kube_scale $res_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
fi
# Check if app shall be fully managed by the test script
if [ $retcode_i -eq 0 ]; then
echo -e " Creating $ECS_APP_NAME app and expose service"
#Check if nonrtric namespace exists, if not create it
__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE
export ECS_APP_NAME
export KUBE_NONRTRIC_NAMESPACE
export ECS_IMAGE
export ECS_INTERNAL_PORT
export ECS_INTERNAL_SECURE_PORT
export ECS_EXTERNAL_PORT
export ECS_EXTERNAL_SECURE_PORT
export ECS_CONFIG_MOUNT_PATH
export ECS_CONFIG_CONFIGMAP_NAME=$ECS_APP_NAME"-config"
export ECS_DATA_CONFIGMAP_NAME=$ECS_APP_NAME"-data"
export ECS_CONTAINER_MNT_DIR
export ECS_DATA_PV_NAME=$ECS_APP_NAME"-pv"
export ECS_DATA_PVC_NAME=$ECS_APP_NAME"-pvc"
#Create a unique path for the pv each time to prevent a previous volume to be reused
export ECS_PV_PATH="ecsdata-"$(date +%s)
if [ $1 == "PROXY" ]; then
ECS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
ECS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
if [ $ECS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$ECS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
else
echo " Configured with http proxy"
fi
else
ECS_HTTP_PROXY_CONFIG_PORT=0
ECS_HTTP_PROXY_CONFIG_HOST_NAME=""
echo " Configured without http proxy"
fi
export ECS_HTTP_PROXY_CONFIG_PORT
export ECS_HTTP_PROXY_CONFIG_HOST_NAME
# Create config map for config
datafile=$PWD/tmp/$ECS_CONFIG_FILE
cp $2 $datafile
output_yaml=$PWD/tmp/ecs_cfc.yaml
__kube_create_configmap $ECS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest ECS $datafile $output_yaml
# Create pv
input_yaml=$SIM_GROUP"/"$ECS_COMPOSE_DIR"/"pv.yaml
output_yaml=$PWD/tmp/ecs_pv.yaml
__kube_create_instance pv $ECS_APP_NAME $input_yaml $output_yaml
# Create pvc
input_yaml=$SIM_GROUP"/"$ECS_COMPOSE_DIR"/"pvc.yaml
output_yaml=$PWD/tmp/ecs_pvc.yaml
__kube_create_instance pvc $ECS_APP_NAME $input_yaml $output_yaml
# Create service
input_yaml=$SIM_GROUP"/"$ECS_COMPOSE_DIR"/"svc.yaml
output_yaml=$PWD/tmp/ecs_svc.yaml
__kube_create_instance service $ECS_APP_NAME $input_yaml $output_yaml
# Create app
input_yaml=$SIM_GROUP"/"$ECS_COMPOSE_DIR"/"app.yaml
output_yaml=$PWD/tmp/ecs_app.yaml
__kube_create_instance app $ECS_APP_NAME $input_yaml $output_yaml
fi
# Tie the ECS to a worker node so that ECS will always be scheduled to the same worker node if the ECS pod is restarted
# A PVC of type hostPath is mounted to ECS, for persistent storage, so the ECS must always be on the node which mounted the volume
# Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host
if [ $retcode_i -eq 0 ]; then
__ECS_WORKER_NODE=$(kubectl get pod -l "autotest=ECS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}')
if [ -z "$__ECS_WORKER_NODE" ]; then
echo -e $YELLOW" Cannot find worker node for pod for $ECS_APP_NAME, persistency may not work"$EYELLOW
fi
else
echo -e $YELLOW" Persistency may not work for app $ECS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
fi
echo " Retrieving host and ports for service..."
ECS_HOST_NAME=$(__kube_get_service_host $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
ECS_EXTERNAL_PORT=$(__kube_get_service_port $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http")
ECS_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https")
echo " Host IP, http port, https port: $ECS_HOST_NAME $ECS_EXTERNAL_PORT $ECS_EXTERNAL_SECURE_PORT"
if [ $ECS_HTTPX == "http" ]; then
ECS_PATH=$ECS_HTTPX"://"$ECS_HOST_NAME":"$ECS_EXTERNAL_PORT
else
ECS_PATH=$ECS_HTTPX"://"$ECS_HOST_NAME":"$ECS_EXTERNAL_SECURE_PORT
fi
__check_service_start $ECS_APP_NAME $ECS_PATH$ECS_ALIVE_URL
if [ $ECS_ADAPTER_TYPE == "REST" ]; then
ECS_ADAPTER=$ECS_PATH
fi
else
__check_included_image 'ECS'
if [ $? -eq 1 ]; then
echo -e $RED"The ECS app is not included in this test script"$ERED
echo -e $RED"ECS will not be started"$ERED
exit 1
fi
curdir=$PWD
cd $SIM_GROUP
cd ecs
cd $ECS_HOST_MNT_DIR
#cd ..
if [ -d db ]; then
if [ "$(ls -A $DIR)" ]; then
echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD
rm -rf db/* &> /dev/null
if [ $? -ne 0 ]; then
echo -e $RED" Cannot remove database files in: $PWD"$ERED
exit 1
fi
fi
else
echo " No files in mounted dir or dir does not exists"
fi
cd $curdir
export ECS_APP_NAME
export ECS_APP_NAME_ALIAS
export ECS_HOST_MNT_DIR
export ECS_CONTAINER_MNT_DIR
export ECS_CONFIG_MOUNT_PATH
export ECS_CONFIG_FILE
export ECS_INTERNAL_PORT
export ECS_EXTERNAL_PORT
export ECS_INTERNAL_SECURE_PORT
export ECS_EXTERNAL_SECURE_PORT
export DOCKER_SIM_NWNAME
export ECS_DISPLAY_NAME
if [ $1 == "PROXY" ]; then
ECS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
ECS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
if [ $ECS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$ECS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
else
echo " Configured with http proxy"
fi
else
ECS_HTTP_PROXY_CONFIG_PORT=0
ECS_HTTP_PROXY_CONFIG_HOST_NAME=""
echo " Configured without http proxy"
fi
export ECS_HTTP_PROXY_CONFIG_PORT
export ECS_HTTP_PROXY_CONFIG_HOST_NAME
dest_file=$SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_HOST_MNT_DIR/$ECS_CONFIG_FILE
envsubst < $2 > $dest_file
__start_container $ECS_COMPOSE_DIR "" NODOCKERARGS 1 $ECS_APP_NAME
__check_service_start $ECS_APP_NAME $ECS_PATH$ECS_ALIVE_URL
fi
echo ""
return 0
}
# Stop the ecs
# args: -
# args: -
# (Function for test scripts)
stop_ecs() {
echo -e $BOLD"Stopping $ECS_DISPLAY_NAME"$EBOLD
if [ $RUNMODE == "KUBE" ]; then
__check_prestarted_image "ECS"
if [ $? -eq 0 ]; then
echo -e $YELLOW" Persistency may not work for app $ECS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
res_type=$(__kube_get_resource_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
__kube_scale $res_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0
return 0
fi
__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest ECS
echo " Deleting the replica set - a new will be started when the app is started"
tmp=$(kubectl delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=ECS")
if [ $? -ne 0 ]; then
echo -e $RED" Could not delete replica set "$RED
((RES_CONF_FAIL++))
return 1
fi
else
docker stop $ECS_APP_NAME &> ./tmp/.dockererr
if [ $? -ne 0 ]; then
__print_err "Could not stop $ECS_APP_NAME" $@
cat ./tmp/.dockererr
((RES_CONF_FAIL++))
return 1
fi
fi
echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
echo ""
return 0
}
# Start a previously stopped ecs
# args: -
# (Function for test scripts)
start_stopped_ecs() {
echo -e $BOLD"Starting (the previously stopped) $ECS_DISPLAY_NAME"$EBOLD
if [ $RUNMODE == "KUBE" ]; then
__check_prestarted_image "ECS"
if [ $? -eq 0 ]; then
echo -e $YELLOW" Persistency may not work for app $ECS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
res_type=$(__kube_get_resource_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
__kube_scale $res_type $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
__check_service_start $ECS_APP_NAME $ECS_PATH$ECS_ALIVE_URL
return 0
fi
# Tie the PMS to the same worker node it was initially started on
# A PVC of type hostPath is mounted to PMS, for persistent storage, so the PMS must always be on the node which mounted the volume
if [ -z "$__ECS_WORKER_NODE" ]; then
echo -e $RED" No initial worker node found for pod "$RED
((RES_CONF_FAIL++))
return 1
else
echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__ECS_WORKER_NODE to deployment for $ECS_APP_NAME. Pod will always run on this worker node: $__PA_WORKER_NODE"$BOLD
echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD
tmp=$(kubectl patch deployment $ECS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__ECS_WORKER_NODE'"}}}}}')
if [ $? -ne 0 ]; then
echo -e $YELLOW" Cannot set nodeSelector to deployment for $ECS_APP_NAME, persistency may not work"$EYELLOW
fi
__kube_scale deployment $ECS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
fi
else
docker start $ECS_APP_NAME &> ./tmp/.dockererr
if [ $? -ne 0 ]; then
__print_err "Could not start (the stopped) $ECS_APP_NAME" $@
cat ./tmp/.dockererr
((RES_CONF_FAIL++))
return 1
fi
fi
__check_service_start $ECS_APP_NAME $ECS_PATH$ECS_ALIVE_URL
if [ $? -ne 0 ]; then
return 1
fi
echo ""
return 0
}
# Turn on debug level tracing in ECS
# args: -
# (Function for test scripts)
set_ecs_debug() {
echo -e $BOLD"Setting ecs debug logging"$EBOLD
curlString="$ECS_PATH$ECS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
__print_err "Could not set debug mode" $@
((RES_CONF_FAIL++))
return 1
fi
echo ""
return 0
}
# Turn on trace level tracing in ECS
# args: -
# (Function for test scripts)
set_ecs_trace() {
echo -e $BOLD"Setting ecs trace logging"$EBOLD
curlString="$ECS_PATH/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
__print_err "Could not set trace mode" $@
((RES_CONF_FAIL++))
return 1
fi
echo ""
return 0
}
# Perform curl retries when making direct call to ECS for the specified http response codes
# Speace separated list of http response codes
# args: [<response-code>]*
use_ecs_retries() {
echo -e $BOLD"Do curl retries to the ECS REST inteface for these response codes:$@"$EBOLD
ECS_RETRY_CODES=$@
echo ""
return 0
}
# Check the ecs logs for WARNINGs and ERRORs
# args: -
# (Function for test scripts)
check_ecs_logs() {
__check_container_logs "ECS" $ECS_APP_NAME $ECS_LOGPATH WARN ERR
}
# Tests if a variable value in the ECS is equal to a target value and and optional timeout.
# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
# equal to the target or not.
# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
# before setting pass or fail depending on if the variable value becomes equal to the target
# value or not.
# (Function for test scripts)
ecs_equal() {
if [ $# -eq 2 ] || [ $# -eq 3 ]; then
__var_test ECS "$ECS_PATH/" $1 "=" $2 $3
else
__print_err "Wrong args to ecs_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
fi
}
##########################################
######### A1-E Enrichment API ##########
##########################################
#Function prefix: ecs_api_a1
# API Test function: GET /A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs
# args: <response-code> <type-id> <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]
# args (flat uri structure): <response-code> <type-id>|NOTYPE <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]
# (Function for test scripts)
ecs_api_a1_get_job_ids() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
# Valid number of parameters 4,5,6 etc
if [ $# -lt 3 ]; then
__print_err "<response-code> <type-id> <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]" $@
return 1
fi
else
echo -e $YELLOW"INTERFACE - FLAT URI STRUCTURE"$EYELLOW
# Valid number of parameters 4,5,6 etc
if [ $# -lt 3 ]; then
__print_err "<response-code> <type-id>|NOTYPE <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]" $@
return 1
fi
fi
search=""
if [ $3 != "NOWNER" ]; then
search="?owner="$3
fi
if [ -z "$FLAT_A1_EI" ]; then
query="/A1-EI/v1/eitypes/$2/eijobs$search"
else
if [ $2 != "NOTYPE" ]; then
if [ -z "$search" ]; then
search="?eiTypeId="$2
else
search=$search"&eiTypeId="$2
fi
fi
query="/A1-EI/v1/eijobs$search"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 3 ]; then
body=${res:0:${#res}-3}
targetJson="["
for pid in ${@:4} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ $pid != "EMPTY" ]; then
targetJson=$targetJson"\"$pid\""
fi
done
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET ​/A1-EI​/v1​/eitypes​/{eiTypeId}
# args: <response-code> <type-id> [<schema-file>]
# (Function for test scripts)
ecs_api_a1_get_type() {
__log_test_start $@
if [ $# -lt 2 ] || [ $# -gt 3 ]; then
__print_err "<response-code> <type-id> [<schema-file>]" $@
return 1
fi
query="/A1-EI/v1/eitypes/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -eq 3 ]; then
body=${res:0:${#res}-3}
if [ -f $3 ]; then
schema=$(cat $3)
else
__log_test_fail_general "Schema file "$3", does not exist"
return 1
fi
if [ -z "$FLAT_A1_EI" ]; then
targetJson="{\"eiJobParametersSchema\":$schema}"
else
targetJson=$schema
fi
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /A1-EI/v1/eitypes
# args: <response-code> [ (EMPTY | [<type-id>]+) ]
# (Function for test scripts)
ecs_api_a1_get_type_ids() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code> [ (EMPTY | [<type-id>]+) ]" $@
return 1
fi
query="/A1-EI/v1/eitypes"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 1 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $2 != "EMPTY" ]; then
for pid in ${@:2} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"$pid\""
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET ​/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}​/status
# args: <response-code> <type-id> <job-id> [<status>]
# args (flat uri structure): <response-code> <job-id> [<status> [<timeout>]]
# (Function for test scripts)
ecs_api_a1_get_job_status() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
if [ $# -ne 3 ] && [ $# -ne 4 ]; then
__print_err "<response-code> <type-id> <job-id> [<status>]" $@
return 1
fi
query="/A1-EI/v1/eitypes/$2/eijobs/$3/status"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -eq 4 ]; then
body=${res:0:${#res}-3}
targetJson="{\"operationalState\": \"$4\"}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
else
echo -e $YELLOW"INTERFACE - FLAT URI STRUCTURE"$EYELLOW
if [ $# -lt 2 ] && [ $# -gt 4 ]; then
__print_err "<response-code> <job-id> [<status> [<timeout>]]" $@
return 1
fi
query="/A1-EI/v1/eijobs/$2/status"
start=$SECONDS
for (( ; ; )); do
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $# -eq 4 ]; then
duration=$((SECONDS-start))
echo -ne " Response=${status} after ${duration} seconds, waiting for ${3} ${SAMELINE}"
if [ $duration -gt $4 ]; then
echo ""
duration=-1 #Last iteration
fi
else
duration=-1 #single test, no wait
fi
if [ $status -ne $1 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
fi
if [ $# -ge 3 ] && [ $status -eq $1 ]; then
body=${res:0:${#res}-3}
targetJson="{\"eiJobStatus\": \"$3\"}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_body
return 1
fi
else
duration=-1 #Goto pass
fi
fi
if [ $duration -eq -1 ]; then
if [ $# -eq 4 ]; then
echo ""
fi
__log_test_pass
return 0
else
sleep 1
fi
done
fi
__log_test_pass
return 0
}
# API Test function: GET ​/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}
# args: <response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]
# args (flat uri structure): <response-code> <job-id> [<type-id> <target-url> <owner-id> <template-job-file>]
# (Function for test scripts)
ecs_api_a1_get_job() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
if [ $# -ne 3 ] && [ $# -ne 6 ]; then
__print_err "<response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]" $@
return 1
fi
query="/A1-EI/v1/eitypes/$2/eijobs/$3"
else
echo -e $YELLOW"INTERFACE - FLAT URI STRUCTURE"$EYELLOW
if [ $# -ne 2 ] && [ $# -ne 7 ]; then
__print_err "<response-code> <job-id> [<type-id> <target-url> <owner-id> <notification-url> <template-job-file>]" $@
return 1
fi
query="/A1-EI/v1/eijobs/$2"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ -z "$FLAT_A1_EI" ]; then
if [ $# -eq 6 ]; then
body=${res:0:${#res}-3}
if [ -f $6 ]; then
jobfile=$(cat $6)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g")
else
__log_test_fail_general "Job template file "$6", does not exist"
return 1
fi
targetJson="{\"targetUri\": \"$4\",\"jobOwner\": \"$5\",\"jobParameters\": $jobfile}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
else
if [ $# -eq 7 ]; then
body=${res:0:${#res}-3}
if [ -f $7 ]; then
jobfile=$(cat $7)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$2/g")
else
__log_test_fail_general "Job template file "$6", does not exist"
return 1
fi
targetJson="{\"eiTypeId\": \"$3\", \"jobResultUri\": \"$4\",\"jobOwner\": \"$5\",\"jobStatusNotificationUri\": \"$6\",\"jobDefinition\": $jobfile}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
fi
__log_test_pass
return 0
}
# API Test function: DELETE ​/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}
# args: <response-code> <type-id> <job-id>
# args (flat uri structure): <response-code> <job-id>
# (Function for test scripts)
ecs_api_a1_delete_job() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
if [ $# -ne 3 ]; then
__print_err "<response-code> <type-id> <job-id>" $@
return 1
fi
query="/A1-EI/v1/eitypes/$2/eijobs/$3"
else
echo -e $YELLOW"INTERFACE - FLAT URI STRUCTURE"$EYELLOW
if [ $# -ne 2 ]; then
__print_err "<response-code> <job-id>" $@
return 1
fi
query="/A1-EI/v1/eijobs/$2"
fi
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: PUT ​/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}
# args: <response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file>
# args (flat uri structure): <response-code> <job-id> <type-id> <target-url> <owner-id> <notification-url> <template-job-file>
# (Function for test scripts)
ecs_api_a1_put_job() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
if [ $# -lt 6 ]; then
__print_err "<response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file>" $@
return 1
fi
if [ -f $6 ]; then
jobfile=$(cat $6)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g")
else
__log_test_fail_general "Job template file "$6", does not exist"
return 1
fi
inputJson="{\"targetUri\": \"$4\",\"jobOwner\": \"$5\",\"jobParameters\": $jobfile}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/A1-EI/v1/eitypes/$2/eijobs/$3"
else
echo -e $YELLOW"INTERFACE - FLAT URI STRUCTURE"$EYELLOW
if [ $# -lt 7 ]; then
__print_err "<response-code> <job-id> <type-id> <target-url> <owner-id> <notification-url> <template-job-file>" $@
return 1
fi
if [ -f $7 ]; then
jobfile=$(cat $7)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$2/g")
else
__log_test_fail_general "Job template file "$7", does not exist"
return 1
fi
inputJson="{\"eiTypeId\": \"$3\", \"jobResultUri\": \"$4\",\"jobOwner\": \"$5\",\"jobStatusNotificationUri\": \"$6\",\"jobDefinition\": $jobfile}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/A1-EI/v1/eijobs/$2"
fi
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
##########################################
#### Enrichment Data Producer API ####
##########################################
# Function prefix: ecs_api_edp
# API Test function: GET /ei-producer/v1/eitypes
# API Test function: GET /data-producer/v1/info-types
# args: <response-code> [ EMPTY | <type-id>+]
# (Function for test scripts)
ecs_api_edp_get_type_ids() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code> [ EMPTY | <type-id>+]" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-types"
else
query="/ei-producer/v1/eitypes"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 1 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $2 != "EMPTY" ]; then
for pid in ${@:2} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"$pid\""
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}/status
# API Test function: GET /data-producer/v1/info-producers/{infoProducerId}/status
# args: <response-code> <producer-id> [<status> [<timeout>]]
# (Function for test scripts)
ecs_api_edp_get_producer_status() {
__log_test_start $@
if [ $# -lt 2 ] || [ $# -gt 4 ]; then
__print_err "<response-code> <producer-id> [<status> [<timeout>]]" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-producers/$2/status"
else
query="/ei-producer/v1/eiproducers/$2/status"
fi
start=$SECONDS
for (( ; ; )); do
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $# -eq 4 ]; then
duration=$((SECONDS-start))
echo -ne " Response=${status} after ${duration} seconds, waiting for ${3} ${SAMELINE}"
if [ $duration -gt $4 ]; then
echo ""
duration=-1 #Last iteration
fi
else
duration=-1 #single test, no wait
fi
if [ $status -ne $1 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
fi
if [ $# -ge 3 ] && [ $status -eq $1 ]; then
body=${res:0:${#res}-3}
targetJson="{\"operational_state\": \"$3\"}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_body
return 1
fi
else
duration=-1 #Goto pass
fi
fi
if [ $duration -eq -1 ]; then
if [ $# -eq 4 ]; then
echo ""
fi
__log_test_pass
return 0
else
sleep 1
fi
done
}
# API Test function: GET /ei-producer/v1/eiproducers
# args (v1_1): <response-code> [ EMPTY | <producer-id>+]
# (Function for test scripts)
ecs_api_edp_get_producer_ids() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code> [ EMPTY | <producer-id>+]" $@
return 1
fi
query="/ei-producer/v1/eiproducers"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 1 ]; then
body=${res:0:${#res}-3}
targetJson="["
for pid in ${@:2} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ $pid != "EMPTY" ]; then
targetJson=$targetJson"\"$pid\""
fi
done
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers
# API Test function: GET /data-producer/v1/info-producers
# args (v1_2): <response-code> [ ( NOTYPE | <type-id> ) [ EMPTY | <producer-id>+] ]
# (Function for test scripts)
ecs_api_edp_get_producer_ids_2() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code> [ ( NOTYPE | <type-id> ) [ EMPTY | <producer-id>+] ]" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-producers"
if [ $# -gt 1 ] && [ $2 != "NOTYPE" ]; then
query=$query"?info_type_id=$2"
fi
else
query="/ei-producer/v1/eiproducers"
if [ $# -gt 1 ] && [ $2 != "NOTYPE" ]; then
query=$query"?ei_type_id=$2"
fi
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
for pid in ${@:3} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ $pid != "EMPTY" ]; then
targetJson=$targetJson"\"$pid\""
fi
done
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eitypes/{eiTypeId}
# args: (v1_1) <response-code> <type-id> [<job-schema-file> (EMPTY | [<producer-id>]+)]
# (Function for test scripts)
ecs_api_edp_get_type() {
__log_test_start $@
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -gt 3 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <type-id> [<job-schema-file> 'EMPTY' | ([<producer-id>]+)]" $@
return 1
fi
query="/ei-producer/v1/eitypes/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 3 ]; then
body=${res:0:${#res}-3}
if [ -f $3 ]; then
schema=$(cat $3)
else
__log_test_fail_general "Job template file "$3", does not exist"
return 1
fi
targetJson=""
if [ $4 != "EMPTY" ]; then
for pid in ${@:4} ; do
if [ "$targetJson" != "" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"$pid\""
done
fi
targetJson="{\"ei_job_data_schema\":$schema, \"ei_producer_ids\": [$targetJson]}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eitypes/{eiTypeId}
# API Test function: GET /data-producer/v1/info-types/{infoTypeId}
# args: (v1_2) <response-code> <type-id> [<job-schema-file> ]
# (Function for test scripts)
ecs_api_edp_get_type_2() {
__log_test_start $@
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -eq 3 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <type-id> [<job-schema-file> ]" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-types/$2"
else
query="/ei-producer/v1/eitypes/$2"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -eq 3 ]; then
body=${res:0:${#res}-3}
if [ -f $3 ]; then
schema=$(cat $3)
else
__log_test_fail_general "Job template file "$3", does not exist"
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
targetJson="{\"info_job_data_schema\":$schema}"
else
targetJson="{\"ei_job_data_schema\":$schema}"
fi
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: PUT /ei-producer/v1/eitypes/{eiTypeId}
# API Test function: PUT /data-producer/v1/info-types/{infoTypeId}
# args: (v1_2) <response-code> <type-id> <job-schema-file>
# (Function for test scripts)
ecs_api_edp_put_type_2() {
__log_test_start $@
if [ $# -ne 3 ]; then
__print_err "<response-code> <type-id> <job-schema-file>" $@
return 1
fi
if [ ! -f $3 ]; then
__log_test_fail_general "Job schema file "$3", does not exist"
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
schema=$(cat $3)
input_json="{\"info_job_data_schema\":$schema}"
file="./tmp/put_type.json"
echo $input_json > $file
query="/data-producer/v1/info-types/$2"
else
schema=$(cat $3)
input_json="{\"ei_job_data_schema\":$schema}"
file="./tmp/put_type.json"
echo $input_json > $file
query="/ei-producer/v1/eitypes/$2"
fi
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: DELETE /ei-producer/v1/eitypes/{eiTypeId}
# API Test function: DELETE /data-producer/v1/info-types/{infoTypeId}
# args: (v1_2) <response-code> <type-id>
# (Function for test scripts)
ecs_api_edp_delete_type_2() {
__log_test_start $@
if [ $# -ne 2 ]; then
__print_err "<response-code> <type-id>" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-types/$2"
else
query="/ei-producer/v1/eitypes/$2"
fi
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}
# args: (v1_1) <response-code> <producer-id> [<job-callback> <supervision-callback> (EMPTY | [<type-id> <schema-file>]+) ]
# (Function for test scripts)
ecs_api_edp_get_producer() {
__log_test_start $@
#Possible arg count: 2, 5 6, 8, 10 etc
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -eq 5 ] && [ "$5" == "EMPTY" ]; then
paramError=0
fi
variablecount=$(($#-4))
if [ $# -gt 5 ] && [ $(($variablecount%2)) -eq 0 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <producer-id> [<job-callback> <supervision-callback> (NOID | [<type-id> <schema-file>]+) ]" $@
return 1
fi
query="/ei-producer/v1/eiproducers/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $# -gt 5 ]; then
arr=(${@:5})
for ((i=0; i<$(($#-5)); i=i+2)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ -f ${arr[$i+1]} ]; then
schema=$(cat ${arr[$i+1]})
else
__log_test_fail_general "Schema file "${arr[$i+1]}", does not exist"
return 1
fi
targetJson=$targetJson"{\"ei_type_identity\":\"${arr[$i]}\",\"ei_job_data_schema\":$schema}"
done
fi
targetJson=$targetJson"]"
if [ $# -gt 4 ]; then
targetJson="{\"supported_ei_types\":$targetJson,\"ei_job_callback_url\": \"$3\",\"ei_producer_supervision_callback_url\": \"$4\"}"
fi
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}
# API Test function: GET /data-producer/v1/info-producers/{infoProducerId}
# args (v1_2): <response-code> <producer-id> [<job-callback> <supervision-callback> (EMPTY | <type-id>+) ]
# (Function for test scripts)
ecs_api_edp_get_producer_2() {
__log_test_start $@
#Possible arg count: 2, 5, 6, 7, 8 etc
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -eq 5 ] && [ "$5" == "EMPTY" ]; then
paramError=0
fi
if [ $# -ge 5 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <producer-id> [<job-callback> <supervision-callback> (EMPTY | <type-id>+) ]" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-producers/$2"
else
query="/ei-producer/v1/eiproducers/$2"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $# -gt 4 ] && [ "$5" != "EMPTY" ]; then
arr=(${@:5})
for ((i=0; i<$(($#-4)); i=i+1)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"${arr[$i]}\""
done
fi
targetJson=$targetJson"]"
if [ $# -gt 4 ]; then
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
targetJson="{\"supported_info_types\":$targetJson,\"info_job_callback_url\": \"$3\",\"info_producer_supervision_callback_url\": \"$4\"}"
else
targetJson="{\"supported_ei_types\":$targetJson,\"ei_job_callback_url\": \"$3\",\"ei_producer_supervision_callback_url\": \"$4\"}"
fi
fi
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: DELETE /ei-producer/v1/eiproducers/{eiProducerId}
# API Test function: DELETE /data-producer/v1/info-producers/{infoProducerId}
# args: <response-code> <producer-id>
# (Function for test scripts)
ecs_api_edp_delete_producer() {
__log_test_start $@
if [ $# -lt 2 ]; then
__print_err "<response-code> <producer-id>" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-producers/$2"
else
query="/ei-producer/v1/eiproducers/$2"
fi
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: PUT /ei-producer/v1/eiproducers/{eiProducerId}
# args: (v1_1) <response-code> <producer-id> <job-callback> <supervision-callback> NOTYPE|[<type-id> <schema-file>]+
# (Function for test scripts)
ecs_api_edp_put_producer() {
__log_test_start $@
#Valid number of parametrer 5,6,8,10,
paramError=1
if [ $# -eq 5 ] && [ "$5" == "NOTYPE" ]; then
paramError=0
elif [ $# -gt 5 ] && [ $(($#%2)) -eq 0 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <producer-id> <job-callback> <supervision-callback> NOTYPE|[<type-id> <schema-file>]+" $@
return 1
fi
inputJson="["
if [ $# -gt 5 ]; then
arr=(${@:5})
for ((i=0; i<$(($#-5)); i=i+2)); do
if [ "$inputJson" != "[" ]; then
inputJson=$inputJson","
fi
if [ -f ${arr[$i+1]} ]; then
schema=$(cat ${arr[$i+1]})
else
__log_test_fail_general "Schema file "${arr[$i+1]}", does not exist"
return 1
fi
inputJson=$inputJson"{\"ei_type_identity\":\"${arr[$i]}\",\"ei_job_data_schema\":$schema}"
done
fi
inputJson="\"supported_ei_types\":"$inputJson"]"
inputJson=$inputJson",\"ei_job_callback_url\": \"$3\",\"ei_producer_supervision_callback_url\": \"$4\""
inputJson="{"$inputJson"}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/ei-producer/v1/eiproducers/$2"
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: PUT /ei-producer/v1/eiproducers/{eiProducerId}
# API Test function: PUT /data-producer/v1/info-producers/{infoProducerId}
# args: (v1_2) <response-code> <producer-id> <job-callback> <supervision-callback> NOTYPE|[<type-id>+]
# (Function for test scripts)
ecs_api_edp_put_producer_2() {
__log_test_start $@
#Valid number of parametrer 5,6,8,10,
paramError=1
if [ $# -eq 5 ] && [ "$5" == "NOTYPE" ]; then
paramError=0
elif [ $# -ge 5 ]; then
paramError=0
fi
if [ $paramError -ne 0 ]; then
__print_err "<response-code> <producer-id> <job-callback> <supervision-callback> NOTYPE|[<type-id>+]" $@
return 1
fi
inputJson="["
if [ $# -gt 4 ] && [ "$5" != "NOTYPE" ]; then
arr=(${@:5})
for ((i=0; i<$(($#-4)); i=i+1)); do
if [ "$inputJson" != "[" ]; then
inputJson=$inputJson","
fi
inputJson=$inputJson"\""${arr[$i]}"\""
done
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
inputJson="\"supported_info_types\":"$inputJson"]"
inputJson=$inputJson",\"info_job_callback_url\": \"$3\",\"info_producer_supervision_callback_url\": \"$4\""
inputJson="{"$inputJson"}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/data-producer/v1/info-producers/$2"
else
inputJson="\"supported_ei_types\":"$inputJson"]"
inputJson=$inputJson",\"ei_job_callback_url\": \"$3\",\"ei_producer_supervision_callback_url\": \"$4\""
inputJson="{"$inputJson"}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/ei-producer/v1/eiproducers/$2"
fi
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}/eijobs
# args: (V1-1) <response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)
# (Function for test scripts)
ecs_api_edp_get_producer_jobs() {
__log_test_start $@
#Valid number of parameter 2,3,7,11
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -eq 3 ] && [ "$3" == "EMPTY" ]; then
paramError=0
fi
variablecount=$(($#-2))
if [ $# -gt 3 ] && [ $(($variablecount%5)) -eq 0 ]; then
paramError=0
fi
if [ $paramError -eq 1 ]; then
__print_err "<response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)" $@
return 1
fi
query="/ei-producer/v1/eiproducers/$2/eijobs"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $# -gt 3 ]; then
arr=(${@:3})
for ((i=0; i<$(($#-3)); i=i+5)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ -f ${arr[$i+4]} ]; then
jobfile=$(cat ${arr[$i+4]})
jobfile=$(echo "$jobfile" | sed "s/XXXX/${arr[$i]}/g")
else
__log_test_fail_general "Job template file "${arr[$i+4]}", does not exist"
return 1
fi
targetJson=$targetJson"{\"ei_job_identity\":\"${arr[$i]}\",\"ei_type_identity\":\"${arr[$i+1]}\",\"target_uri\":\"${arr[$i+2]}\",\"owner\":\"${arr[$i+3]}\",\"ei_job_data\":$jobfile}"
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}/eijobs
# API Test function: GET /data-producer/v1/info-producers/{infoProducerId}/info-jobs
# args: (V1-2) <response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)
# (Function for test scripts)
ecs_api_edp_get_producer_jobs_2() {
__log_test_start $@
#Valid number of parameter 2,3,7,11
paramError=1
if [ $# -eq 2 ]; then
paramError=0
fi
if [ $# -eq 3 ] && [ "$3" == "EMPTY" ]; then
paramError=0
fi
variablecount=$(($#-2))
if [ $# -gt 3 ] && [ $(($variablecount%5)) -eq 0 ]; then
paramError=0
fi
if [ $paramError -eq 1 ]; then
__print_err "<response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)" $@
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
query="/data-producer/v1/info-producers/$2/info-jobs"
else
query="/ei-producer/v1/eiproducers/$2/eijobs"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $# -gt 3 ]; then
arr=(${@:3})
for ((i=0; i<$(($#-3)); i=i+5)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ -f ${arr[$i+4]} ]; then
jobfile=$(cat ${arr[$i+4]})
jobfile=$(echo "$jobfile" | sed "s/XXXX/${arr[$i]}/g")
else
__log_test_fail_general "Job template file "${arr[$i+4]}", does not exist"
return 1
fi
if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
targetJson=$targetJson"{\"info_job_identity\":\"${arr[$i]}\",\"info_type_identity\":\"${arr[$i+1]}\",\"target_uri\":\"${arr[$i+2]}\",\"owner\":\"${arr[$i+3]}\",\"info_job_data\":$jobfile, \"last_updated\":\"????\"}"
else
targetJson=$targetJson"{\"ei_job_identity\":\"${arr[$i]}\",\"ei_type_identity\":\"${arr[$i+1]}\",\"target_uri\":\"${arr[$i+2]}\",\"owner\":\"${arr[$i+3]}\",\"ei_job_data\":$jobfile, \"last_updated\":\"????\"}"
fi
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
##########################################
#### Service status ####
##########################################
# Function prefix: ecs_api_service
# API Test function: GET ​/status
# args: <response-code>
# (Function for test scripts)
ecs_api_service_status() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code>" $@
return 1
fi
res="$(__do_curl_to_api ECS GET /status)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
###########################################
######### Info data consumer API ##########
###########################################
#Function prefix: ecs_api_idc
# API Test function: GET /data-consumer/v1/info-types
# args: <response-code> [ (EMPTY | [<type-id>]+) ]
# (Function for test scripts)
ecs_api_idc_get_type_ids() {
__log_test_start $@
if [ $# -lt 1 ]; then
__print_err "<response-code> [ (EMPTY | [<type-id>]+) ]" $@
return 1
fi
query="/data-consumer/v1/info-types"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 1 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $2 != "EMPTY" ]; then
for pid in ${@:2} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"$pid\""
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /data-consumer/v1/info-jobs
# args: <response-code> <type-id>|NOTYPE <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]
# (Function for test scripts)
ecs_api_idc_get_job_ids() {
__log_test_start $@
# Valid number of parameters 4,5,6 etc
if [ $# -lt 3 ]; then
__print_err "<response-code> <type-id>|NOTYPE <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]" $@
return 1
fi
search=""
if [ $3 != "NOWNER" ]; then
search="?owner="$3
fi
if [ $2 != "NOTYPE" ]; then
if [ -z "$search" ]; then
search="?infoTypeId="$2
else
search=$search"&infoTypeId="$2
fi
fi
query="/data-consumer/v1/info-jobs$search"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 3 ]; then
body=${res:0:${#res}-3}
targetJson="["
for pid in ${@:4} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
if [ $pid != "EMPTY" ]; then
targetJson=$targetJson"\"$pid\""
fi
done
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /data-consumer/v1/info-jobs/{infoJobId}
# args: <response-code> <job-id> [<type-id> <target-url> <owner-id> <template-job-file>]
# (Function for test scripts)
ecs_api_idc_get_job() {
__log_test_start $@
if [ $# -ne 2 ] && [ $# -ne 7 ]; then
__print_err "<response-code> <job-id> [<type-id> <target-url> <owner-id> <notification-url> <template-job-file>]" $@
return 1
fi
query="/data-consumer/v1/info-jobs/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -eq 7 ]; then
body=${res:0:${#res}-3}
if [ -f $7 ]; then
jobfile=$(cat $7)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$2/g")
else
__log_test_fail_general "Job template file "$6", does not exist"
return 1
fi
targetJson="{\"info_type_id\": \"$3\", \"job_result_uri\": \"$4\",\"job_owner\": \"$5\",\"status_notification_uri\": \"$6\",\"job_definition\": $jobfile}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: PUT ​/data-consumer/v1/info-jobs/{infoJobId}
# args: <response-code> <job-id> <type-id> <target-url> <owner-id> <notification-url> <template-job-file> [ VALIDATE ]
# (Function for test scripts)
ecs_api_idc_put_job() {
__log_test_start $@
if [ $# -lt 7 ] || [ $# -gt 8 ]; then
__print_err "<response-code> <job-id> <type-id> <target-url> <owner-id> <notification-url> <template-job-file> [ VALIDATE ]" $@
return 1
fi
if [ -f $7 ]; then
jobfile=$(cat $7)
jobfile=$(echo "$jobfile" | sed "s/XXXX/$2/g")
else
__log_test_fail_general "Job template file "$7", does not exist"
return 1
fi
inputJson="{\"info_type_id\": \"$3\", \"job_result_uri\": \"$4\",\"job_owner\": \"$5\",\"status_notification_uri\": \"$6\",\"job_definition\": $jobfile}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/data-consumer/v1/info-jobs/$2"
if [ $# -eq 8 ]; then
if [ $8 == "VALIDATE" ]; then
query=$query"?typeCheck=true"
fi
fi
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: DELETE ​/data-consumer/v1/info-jobs/{infoJobId}
# args: <response-code> <job-id>
# (Function for test scripts)
ecs_api_idc_delete_job() {
__log_test_start $@
if [ $# -ne 2 ]; then
__print_err "<response-code> <job-id>" $@
return 1
fi
query="/data-consumer/v1/info-jobs/$2"
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: GET ​/data-consumer/v1/info-types/{infoTypeId}
# args: <response-code> <type-id> [<schema-file> [<type-status> <producers-count]]
# (Function for test scripts)
ecs_api_idc_get_type() {
__log_test_start $@
if [ $# -lt 2 ] || [ $# -gt 5 ]; then
__print_err "<response-code> <type-id> [<schema-file> [<type-status> <producers-count]]" $@
return 1
fi
query="/data-consumer/v1/info-types/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
if [ -f $3 ]; then
schema=$(cat $3)
else
__log_test_fail_general "Schema file "$3", does not exist"
return 1
fi
if [ $# -eq 5 ]; then
targetJson="{\"job_data_schema\":$schema, \"type_status\":\"$4\", \"no_of_producers\":$5}"
else
targetJson="{\"job_data_schema\":$schema}"
fi
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /data-consumer/v1/info-jobs/{infoJobId}/status
# This test only status during an optional timeout. No test of the list of producers
# args: <response-code> <job-id> [<status> [<timeout>]]
# (Function for test scripts)
ecs_api_idc_get_job_status() {
__log_test_start $@
if [ $# -lt 2 ] && [ $# -gt 4 ]; then
__print_err "<response-code> <job-id> [<status> [<timeout>]]" $@
return 1
fi
query="/data-consumer/v1/info-jobs/$2/status"
start=$SECONDS
for (( ; ; )); do
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $# -eq 4 ]; then
duration=$((SECONDS-start))
echo -ne " Response=${status} after ${duration} seconds, waiting for ${3} ${SAMELINE}"
if [ $duration -gt $4 ]; then
echo ""
duration=-1 #Last iteration
fi
else
duration=-1 #single test, no wait
fi
if [ $status -ne $1 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
fi
if [ $# -ge 3 ] && [ $status -eq $1 ]; then
body=${res:0:${#res}-3}
targetJson="{\"info_job_status\": \"$3\"}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_body
return 1
fi
else
duration=-1 #Goto pass
fi
fi
if [ $duration -eq -1 ]; then
if [ $# -eq 4 ]; then
echo ""
fi
__log_test_pass
return 0
else
sleep 1
fi
done
__log_test_pass
return 0
}
# API Test function: GET /data-consumer/v1/info-jobs/{infoJobId}/status
# This function test status and the list of producers with and optional timeout
# args: <response-code> <job-id> [<status> EMPTYPROD|( <prod-count> <producer-id>+ ) [<timeout>]]
# (Function for test scripts)
ecs_api_idc_get_job_status2() {
__log_test_start $@
param_error=0
if [ $# -lt 2 ]; then
param_error=1
fi
args=("$@")
timeout=0
if [ $# -gt 2 ]; then
if [ $# -lt 4 ]; then
param_error=1
fi
targetJson="{\"info_job_status\": \"$3\""
if [ "$4" == "EMPTYPROD" ]; then
targetJson=$targetJson",\"producers\": []}"
if [ $# -gt 4 ]; then
timeout=$5
fi
else
targetJson=$targetJson",\"producers\": ["
if [ $# -eq $(($4+5)) ]; then
idx=$(($4+4))
timeout=${args[$idx]}
fi
for ((ecs_i = 0 ; ecs_i < $4 ; ecs_i++)); do
idx=$(($ecs_i+4))
if [ $ecs_i -gt 0 ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\""${args[$idx]}"\""
done
targetJson=$targetJson"]}"
fi
fi
if [ $param_error -ne 0 ]; then
__print_err "<response-code> <job-id> [<status> EMPTYPROD|( <prod-count> <producer-id>+ ) [<timeout>]]" $@
return 1
fi
query="/data-consumer/v1/info-jobs/$2/status"
start=$SECONDS
for (( ; ; )); do
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $# -gt 2 ]; then
duration=$((SECONDS-start))
echo -ne " Response=${status} after ${duration} seconds, waiting for ${3} ${SAMELINE}"
if [ $duration -gt $timeout ]; then
echo ""
duration=-1 #Last iteration
fi
else
duration=-1 #single test, no wait
fi
if [ $status -ne $1 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
fi
if [ $# -gt 2 ] && [ $status -eq $1 ]; then
body=${res:0:${#res}-3}
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
if [ $duration -eq -1 ]; then
__log_test_fail_body
return 1
fi
else
duration=-1 #Goto pass
fi
fi
if [ $duration -eq -1 ]; then
if [ $# -eq 4 ]; then
echo ""
fi
__log_test_pass
return 0
else
sleep 1
fi
done
__log_test_pass
return 0
}
##########################################
#### Type subscriptions ####
##########################################
# API Test function: GET /data-consumer/v1/info-type-subscription
# args: <response-code> <owner-id>|NOOWNER [ EMPTY | <subscription-id>+]
# (Function for test scripts)
ecs_api_idc_get_subscription_ids() {
__log_test_start $@
if [ $# -lt 3 ]; then
__print_err "<response-code> <owner-id>|NOOWNER [ EMPTY | <subscription-id>+]" $@
return 1
fi
query="/data-consumer/v1/info-type-subscription"
search=""
if [ $2 != "NOOWNER" ]; then
search="?owner="$2
fi
res="$(__do_curl_to_api ECS GET $query$search)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="["
if [ $3 != "EMPTY" ]; then
for pid in ${@:3} ; do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
fi
targetJson=$targetJson"\"$pid\""
done
fi
targetJson=$targetJson"]"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: GET /data-consumer/v1/info-type-subscription/{subscriptionId}
# args: <response-code> <subscription-id> [ <owner-id> <status-uri> ]
# (Function for test scripts)
ecs_api_idc_get_subscription() {
__log_test_start $@
if [ $# -ne 2 ] && [ $# -ne 4 ]; then
__print_err "<response-code> <subscription-id> [ <owner-id> <status-uri> ]" $@
return 1
fi
query="/data-consumer/v1/info-type-subscription/$2"
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
if [ $# -gt 2 ]; then
body=${res:0:${#res}-3}
targetJson="{\"owner\":\"$3\",\"status_result_uri\":\"$4\"}"
echo " TARGET JSON: $targetJson" >> $HTTPLOG
res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
__log_test_fail_body
return 1
fi
fi
__log_test_pass
return 0
}
# API Test function: PUT /data-consumer/v1/info-type-subscription/{subscriptionId}
# args: <response-code> <subscription-id> <owner-id> <status-uri>
# (Function for test scripts)
ecs_api_idc_put_subscription() {
__log_test_start $@
if [ $# -ne 4 ]; then
__print_err "<response-code> <subscription-id> <owner-id> <status-uri>" $@
return 1
fi
inputJson="{\"owner\": \"$3\",\"status_result_uri\": \"$4\"}"
file="./tmp/.p.json"
echo "$inputJson" > $file
query="/data-consumer/v1/info-type-subscription/$2"
res="$(__do_curl_to_api ECS PUT $query $file)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
# API Test function: DELETE /data-consumer/v1/info-type-subscription/{subscriptionId}
# args: <response-code> <subscription-id>
# (Function for test scripts)
ecs_api_idc_delete_subscription() {
__log_test_start $@
if [ $# -ne 2 ]; then
__print_err "<response-code> <subscription-id> " $@
return 1
fi
query="/data-consumer/v1/info-type-subscription/$2"
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne $1 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
__log_test_pass
return 0
}
##########################################
#### Reset jobs ####
##########################################
# Function prefix: ecs_api_admin
# Admin to remove all jobs
# args: <response-code> [ <type> ]
# (Function for test scripts)
ecs_api_admin_reset() {
__log_test_start $@
if [ -z "$FLAT_A1_EI" ]; then
query="/A1-EI/v1/eitypes/$2/eijobs"
else
query="/A1-EI/v1/eijobs"
fi
res="$(__do_curl_to_api ECS GET $query)"
status=${res:${#res}-3}
if [ $status -ne 200 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
#Remove brackets and response code
body=${res:1:${#res}-4}
list=$(echo ${body//,/ })
list=$(echo ${list//[/})
list=$(echo ${list//]/})
list=$(echo ${list//\"/})
list=$list" "
for job in $list; do
if [ -z "$FLAT_A1_EI" ]; then
echo "Not supported for non-flat EI api"
else
query="/A1-EI/v1/eijobs/$job"
res="$(__do_curl_to_api ECS DELETE $query)"
status=${res:${#res}-3}
if [ $status -ne 204 ]; then
__log_test_fail_status_code $1 $status
return 1
fi
echo " Deleted job: "$job
fi
done
__log_test_pass
return 0
}
##########################################
#### Reset jobs and producers ####
##########################################
# Admin reset to remove all data in ecs; jobs, producers etc
# NOTE - only works in kubernetes and the pod should not be running
# args: -
# (Function for test scripts)
ecs_kube_pvc_reset() {
__log_test_start $@
pvc_name=$(kubectl get pvc -n nonrtric --no-headers -o custom-columns=":metadata.name" | grep enrichment)
if [ -z "$pvc_name" ]; then
pvc_name=enrichmentservice-pvc
fi
echo " Trying to reset pvc: "$pvc_name
__kube_clean_pvc $ECS_APP_NAME nonrtric $pvc_name /var/enrichment-coordinator-service/database
__log_test_pass
return 0
}