test/common/ricmediatorsim_api_functions.sh

#!/bin/bash

#  ============LICENSE_START===============================================
#  Copyright (C) 2023 Nordix Foundation. All rights reserved.
#  Copyright (C) 2023 OpenInfra Foundation Europe. All rights reserved.
#  ========================================================================
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#  ============LICENSE_END=================================================
#

# This is a script that contains container/service management functions and test functions for RICMEDIATORSIM A1 simulators

################ Test engine functions ################

# Create the image var used during the test
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__RICMEDIATORSIM_imagesetup() {
	__check_and_create_image_var RICMEDIATORSIM "RICMEDIATOR_SIM_IMAGE" "RICMEDIATOR_SIM_IMAGE_BASE" "RICMEDIATOR_SIM_IMAGE_TAG" REMOTE_RELEASE_ORAN "$RICMEDIATOR_SIM_DISPLAY_NAME" ""
	__check_and_create_image_var RICMEDIATORSIM "RICMEDIATOR_SIM_DB_IMAGE" "RICMEDIATOR_SIM_DB_IMAGE_BASE" "RICMEDIATOR_SIM_DB_IMAGE_TAG" REMOTE_RELEASE_ORAN "$RICMEDIATOR_SIM_DB_DISPLAY_NAME" ""
}

# Pull image from remote repo or use locally built image
# arg: <pull-policy-override> <pull-policy-original>
# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__RICMEDIATORSIM_imagepull() {
	__check_and_pull_image $1 "$RICMEDIATOR_SIM_DISPLAY_NAME" $RICMEDIATOR_SIM_PREFIX"_"$RICMEDIATOR_SIM_BASE RICMEDIATOR_SIM_IMAGE
	__check_and_pull_image $1 "$RICMEDIATOR_SIM_DB_DISPLAY_NAME" $RICMEDIATOR_SIM_PREFIX"_"$RICMEDIATOR_SIM_BASE RICMEDIATOR_SIM_DB_IMAGE
}

# Build image (only for simulator or interfaces stubs owned by the test environment)
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__RICMEDIATORSIM_imagebuild() {
	echo -e $RED" Image for app RICMEDIATORSIM shall never be built"$ERED
}

# Generate a string for each included image using the app display name and a docker images format string
# If a custom image repo is used then also the source image from the local repo is listed
# arg: <docker-images-format-string> <file-to-append>
__RICMEDIATORSIM_image_data() {
	echo -e "$RICMEDIATOR_SIM_DISPLAY_NAME\t$(docker images --format $1 $RICMEDIATOR_SIM_IMAGE)" >>   $2
	if [ ! -z "$RICMEDIATOR_SIM_IMAGE_SOURCE" ]; then
		echo -e "-- source image --\t$(docker images --format $1 $RICMEDIATOR_SIM_IMAGE_SOURCE)" >>   $2
	fi
	echo -e "$RICMEDIATOR_SIM_DB_DISPLAY_NAME\t$(docker images --format $1 $RICMEDIATOR_SIM_DB_IMAGE)" >>   $2
	if [ ! -z "$RICMEDIATOR_SIM_DB_IMAGE_SOURCE" ]; then
		echo -e "-- source image --\t$(docker images --format $1 $RICMEDIATOR_SIM_DB_IMAGE_SOURCE)" >>   $2
	fi
}

# Scale kubernetes resources to zero
# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
# This function is called for apps fully managed by the test script
__RICMEDIATORSIM_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_A1SIM_NAMESPACE autotest RICMEDIATORSIM
}

# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
# This function is called for pre-started apps not managed by the test script.
__RICMEDIATORSIM_kube_scale_zero_and_wait() {
	__kube_scale_and_wait_all_resources $KUBE_A1SIM_NAMESPACE app $KUBE_A1SIM_NAMESPACE"-neara1simulator"
}

# Delete all kube resources for the app
# This function is called for apps managed by the test script.
__RICMEDIATORSIM_kube_delete_all() {
	__kube_delete_all_resources $KUBE_A1SIM_NAMESPACE autotest RICMEDIATORSIM
}

# Store docker logs
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prefix>
__RICMEDIATORSIM_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
		for podname in $(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -l "autotest=RICMEDIATORSIM" -o custom-columns=":metadata.name"); do
			kubectl $KUBECONF logs -n $KUBE_A1SIM_NAMESPACE $podname --tail=-1 > $1$2_$podname.log 2>&1
		done
	else

		RICMEDIATORs=$(docker ps --filter "name=$RICMEDIATOR_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "status=running" --filter "label=orana1sim" --format {{.Names}})
		for ric in $rics; do
			docker logs $ric > $1$2_$ric.log 2>&1
		done
	fi
}

# Initial setup of protocol, host and ports
# This function is called for apps managed by the test script.
# args: -
__RICMEDIATORSIM_initial_setup() {
	use_ricmediator_simulator_http
}

# Set app short-name, app name and namespace for logging runtime statistics of kubernetes pods or docker containers
# For docker, the namespace shall be excluded
# This function is called for apps managed by the test script as well as for pre-started apps.
# args: -
__RICMEDIATORSIM_statistics_setup() {
	for ((RICMEDIATOR_SIMINSTANCE=10; RICMEDIATOR_SIMINSTANCE>0; RICMEDIATOR_SIMINSTANCE-- )); do
		if [ $RUNMODE == "KUBE" ]; then
			RICMEDIATOR_SIMINSTANCE_KUBE=$(($RICMEDIATOR_SIMINSTANCE-1))
			echo -n " RICMEDIATOR_SIMG1_$RICMEDIATOR_SIMINSTANCE_KUBE ${RICMEDIATOR_SIM_PREFIX}-g1-$RICMEDIATOR_SIMINSTANCE_KUBE $KUBE_A1SIM_NAMESPACE "
			echo -n " RICMEDIATOR_SIMG2_$RICMEDIATOR_SIMINSTANCE_KUBE ${RICMEDIATOR_SIM_PREFIX}-g2-$RICMEDIATOR_SIMINSTANCE_KUBE $KUBE_A1SIM_NAMESPACE "
			echo -n " RICMEDIATOR_SIMG3_$RICMEDIATOR_SIMINSTANCE_KUBE ${RICMEDIATOR_SIM_PREFIX}-g3-$RICMEDIATOR_SIMINSTANCE_KUBE $KUBE_A1SIM_NAMESPACE "
			echo -n " RICMEDIATOR_SIMG4_$RICMEDIATOR_SIMINSTANCE_KUBE ${RICMEDIATOR_SIM_PREFIX}-g4-$RICMEDIATOR_SIMINSTANCE_KUBE $KUBE_A1SIM_NAMESPACE "
		else
			echo -n " RICMEDIATOR_SIMG1_$RICMEDIATOR_SIMINSTANCE ${RICMEDIATOR_SIM_PREFIX}-g1-$RICMEDIATOR_SIMINSTANCE "
			echo -n " RICMEDIATOR_SIMG2_$RICMEDIATOR_SIMINSTANCE ${RICMEDIATOR_SIM_PREFIX}-g2-$RICMEDIATOR_SIMINSTANCE "
			echo -n " RICMEDIATOR_SIMG3_$RICMEDIATOR_SIMINSTANCE ${RICMEDIATOR_SIM_PREFIX}-g3-$RICMEDIATOR_SIMINSTANCE "
			echo -n " RICMEDIATOR_SIMG4_$RICMEDIATOR_SIMINSTANCE ${RICMEDIATOR_SIM_PREFIX}-g4-$RICMEDIATOR_SIMINSTANCE "
		fi
	done
}

# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
# args: -
__RICMEDIATORSIM_test_requirements() {
	:
}

#######################################################


RICMEDIATOR_SIM_HTTPX="http"
RICMEDIATOR_SIM_PORT=$RICMEDIATOR_SIM_INTERNAL_PORT


#Vars for container count
G1_COUNT=0
G2_COUNT=0
G3_COUNT=0
G4_COUNT=0
G5_COUNT=0


###########################
### RICMEDIATOR Simulator functions
###########################

use_ricmediator_simulator_http() {
	echo -e $BOLD"RICMEDIATORSIM protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD towards the simulators"
	RICMEDIATOR_SIM_HTTPX="http"
	RICMEDIATOR_SIM_PORT=$RICMEDIATOR_SIM_INTERNAL_PORT
	echo ""
}

use_ricmediator_simulator_https() {
	__log_test_fail_not_supported
}

# Start one group (ricsim_g1, ricsim_g2 .. ricsim_g5) with a number of RIC Simulators using a given A interface
# 'ricsim' may be set on command line to other prefix
# args:  ricsim_g1|ricsim_g2|ricsim_g3|ricsim_g4|ricsim_g5 <count> <interface-id>
# (Function for test scripts)
start_ricmediator_simulators() {

	echo -e $BOLD"Starting $RICMEDIATOR_SIM_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		# Check if app shall be fully managed by the test script
		__check_included_image "RICMEDIATORSIM"
		retcode_i=$?

		# Check if app shall only be used by the test script
		__check_prestarted_image "RICMEDIATORSIM"
		retcode_p=$?

		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
			echo -e $RED"The $1 app is not included as managed nor prestarted in this test script"$ERED
			echo -e $RED"The $1 will not be started"$ERED
			exit
		fi
		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
			echo -e $RED"The $1 stub app is included both as managed and prestarted in this test script"$ERED
			echo -e $RED"The $1 will not be started"$ERED
			exit
		fi

		if [ $retcode_p -eq 0 ]; then
			echo -e " Using existing $1 statefulset and service"
			echo " Using existing simulator deployment and service for statefulset $1"
			echo " Setting $1 replicas=$2"
			__kube_scale statefulset $1 $KUBE_A1SIM_NAMESPACE $2
			echo ""
			return
		fi
	fi

	RICMEDIATOR1=$RICMEDIATOR_SIM_PREFIX"_g1"
	RICMEDIATOR2=$RICMEDIATOR_SIM_PREFIX"_g2"
	RICMEDIATOR3=$RICMEDIATOR_SIM_PREFIX"_g3"
	RICMEDIATOR4=$RICMEDIATOR_SIM_PREFIX"_g4"
	RICMEDIATOR5=$RICMEDIATOR_SIM_PREFIX"_g5"

	if [ $# != 3 ]; then
		((RES_CONF_FAIL++))
		__print_err "need three args,  $RICMEDIATOR1|$RICMEDIATOR2|$RICMEDIATOR3|$RICMEDIATOR4|$RICMEDIATOR5 <count> <interface-id>" $@
		exit 1
	fi

	echo " $2 simulators using basename: $1 on interface: $3"
	#Set env var for simulator count and A1 interface vesion for the given group
	if [ $1 == "$RICMEDIATOR1" ]; then
		G1_COUNT=$2
	elif [ $1 == "$RICMEDIATOR2" ]; then
		G2_COUNT=$2
	elif [ $1 == "$RICMEDIATOR3" ]; then
		G3_COUNT=$2
	elif [ $1 == "$RICMEDIATOR4" ]; then
		G4_COUNT=$2
	elif [ $1 == "$RICMEDIATOR5" ]; then
		G5_COUNT=$2
	else
		((RES_CONF_FAIL++))
		__print_err "need three args, $RICMEDIATOR1|$RICMEDIATOR2|$RICMEDIATOR3|$RICMEDIATOR4|$RICMEDIATOR5 <count> <interface-id>" $@
		exit 1
	fi

	if [ $RUNMODE == "KUBE" ]; then

		if [ $retcode_i -eq 0 ]; then

			#export needed env var for statefulset
			export RICMEDIATOR_SIM_SET_NAME=$(echo "$1" | tr '_' '-')  #kube does not accept underscore in names
			export KUBE_A1SIM_NAMESPACE
			export RICMEDIATOR_SIM_IMAGE
			export RICMEDIATOR_SIM_DB_IMAGE
			#Adding 1 more instance, instance 0 is never used. This is done to keep test scripts compatible
			# with docker that starts instance index on 1.....
			export RICMEDIATOR_SIM_COUNT=$(($2+1))
			export A1_VERSION=$3
			export RICMEDIATOR_SIM_INTERNAL_PORT
			export RICMEDIATOR_SIM_INTERNAL_SECURE_PORT

			echo -e " Creating $RICMEDIATOR_SIM_PREFIX app and expose service"

			#Check if nonrtric namespace exists, if not create it
			__kube_create_namespace $KUBE_A1SIM_NAMESPACE

			# Create service
			input_yaml=$SIM_GROUP"/"$RICMEDIATOR_SIM_COMPOSE_DIR"/"svc.yaml
			output_yaml=$PWD/tmp/ric_${1}_svc.yaml
			__kube_create_instance service $RICMEDIATOR_SIM_SET_NAME $input_yaml $output_yaml

			# Create app
			input_yaml=$SIM_GROUP"/"$RICMEDIATOR_SIM_COMPOSE_DIR"/"app.yaml
			output_yaml=$PWD/tmp/ric_${1}_app.yaml
			__kube_create_instance app $RICMEDIATOR_SIM_SET_NAME $input_yaml $output_yaml

			#Using only instance from index 1 to keep compatability with docker
			for (( count=1; count<${RICMEDIATOR_SIM_COUNT}; count++ )); do
				host=$(__find_ricmediatorsim_host $RICMEDIATOR_SIM_SET_NAME"-"$count)
				__check_service_start $RICMEDIATOR_SIM_SET_NAME"-"$count $host$RICMEDIATOR_SIM_ALIVE_URL
			done
		fi
	else
		__check_included_image 'RICMEDIATORSIM'
		if [ $? -eq 1 ]; then
			echo -e $RED"The Near-RT RICMEDIATOR Simulator app is not included as managed in this test script"$ERED
			echo -e $RED"Near-RT RICMEDIATOR Simulator will not be started"$ERED
			exit 1
		fi

		# Create .env file to compose project, all ric container will get this prefix
		echo "COMPOSE_PROJECT_NAME="$RICMEDIATOR_SIM_PREFIX > $SIM_GROUP/$RICMEDIATOR_SIM_COMPOSE_DIR/.env

		#extract service name (group), g1, g2, g3, g4 or g5 from var $1
		#E.g. ricsim_g1 -> g1 is the service name
		TMP_GRP=$1
		RICMEDIATOR_SIMCOMPOSE_SERVICE_NAME=$(echo "${TMP_GRP##*_}")

		export RICMEDIATOR_SIMCOMPOSE_A1_VERSION=$3
		export RICMEDIATOR_SIMCOMPOSE_SERVICE_NAME
		export RICMEDIATOR_SIM_INTERNAL_PORT
		export RICMEDIATOR_SIM_INTERNAL_SECURE_PORT
		export RICMEDIATOR_SIM_CERT_MOUNT_DIR
		export DOCKER_SIM_NWNAME
		export RICMEDIATOR_SIM_DISPLAY_NAME

		docker_args=" --scale $RICMEDIATOR_SIMCOMPOSE_SERVICE_NAME=$2"

		#Create a list of container names
		#Will be <ricsim-prefix>_<service-name>_<index>
		# or
		# <ricsim-prefix>-<service-name>-<index>
		app_data=""
		cntr=1
		app_name_prefix=$RICMEDIATOR_SIM_PREFIX"-"$RICMEDIATOR_SIMCOMPOSE_SERVICE_NAME"-"
		while [ $cntr -le $2 ]; do
			app=$app_name_prefix$cntr
			app_data="$app_data $app"
			let cntr=cntr+1
		done

		__start_container $RICMEDIATOR_SIM_COMPOSE_DIR "" "$docker_args" $2 $app_data

		cntr=1
		while [ $cntr -le $2 ]; do
			app=$RICMEDIATOR_SIM_PREFIX"-"$RICMEDIATOR_SIMCOMPOSE_SERVICE_NAME"-"$cntr
			__check_service_start $app $RICMEDIATOR_SIM_HTTPX"://"$app:$RICMEDIATOR_SIM_PORT$RICMEDIATOR_SIM_ALIVE_URL
			let cntr=cntr+1
		done

	fi
	echo ""
	return 0
}

# Translate ric name to kube host name
# args: <ric-name>
# For test scripts
get_kube_ricmediatorsim_host() {
	name=$(echo "$1" | tr '_' '-')  #kube does not accept underscore in names
	#example gnb_1_2 -> gnb-1-2
	set_name=$(echo $name | rev | cut -d- -f2- | rev) # Cut index part of ric name to get the name of statefulset
	# example gnb-g1-2 -> gnb-g1 where gnb-g1-2 is the ric name and gnb-g1 is the set name
	echo $name"."$set_name"."$KUBE_A1SIM_NAMESPACE
}

# Helper function to get a the port and host name of a specific ric simulator
# args: <ric-id>
# (Not for test scripts)
__find_ricmediatorsim_host() {
	if [ $RUNMODE == "KUBE" ]; then
		ricname=$(echo "$1" | tr '_' '-') # Kube does not accept underscore in names as docker do
		if [ -z "$RICMEDIATOR_SIM_COMMON_SVC_NAME" ]; then
			ric_setname="${ricname%-*}"  #Extract the stateful set name
		else
			ric_setname=$RICMEDIATOR_SIM_COMMON_SVC_NAME # Use the common svc name in the host name of the sims
		fi
		echo $RICMEDIATOR_SIM_HTTPX"://"$ricname.$ric_setname.$KUBE_A1SIM_NAMESPACE":"$RICMEDIATOR_SIM_PORT
	else
		ricname=$(echo "$1" | tr '_' '-')
		echo $RICMEDIATOR_SIM_HTTPX"://"$ricname":"$RICMEDIATOR_SIM_PORT
	fi
}

# Generate a UUID to use as prefix for policy ids
nearsim_generate_policy_uuid() {
	UUID=$(python3 -c 'import sys,uuid; sys.stdout.write(uuid.uuid4().hex)')
	#Reduce length to make space for serial id, uses 'a' as marker where the serial id is added
	UUID=${UUID:0:${#UUID}-4}"a"
}

# Execute a curl cmd towards a ricsimulator and check the response code.
# args: <expected-response-code> <curl-cmd-string>
__execute_curl_to_ricmediatorsim() {
	echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
	proxyflag=""
	if [ ! -z "$KUBE_PROXY_PATH" ]; then
		if [ $KUBE_PROXY_HTTPX == "http" ]; then
			proxyflag=" --proxy $KUBE_PROXY_PATH"
		else
			proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
		fi
	fi
	if [ -z "$KUBE_PROXY_CURL_JWT" ]; then
		echo " CMD: $2 $proxyflag" >> $HTTPLOG
		res="$($2 $proxyflag)"
	else
		echo " CMD: $2 $proxyflag -H Authorization: Bearer $KUBE_PROXY_CURL_JWT" >> $HTTPLOG
		res=$($2 $proxyflag -H 'Authorization: Bearer '$KUBE_PROXY_CURL_JWT)
	fi

	echo " RESP: $res" >> $HTTPLOG
	retcode=$?
    if [ $retcode -ne 0 ]; then
		((RES_CONF_FAIL++))
		echo " RETCODE: "$retcode
        echo -e $RED" FAIL - fatal error when executing curl."$ERED
        return 1
    fi
    status=${res:${#res}-3}
    if [ $status -eq $1 ]; then
        echo -e $GREEN" OK"$EGREEN
        return 0
    fi
    echo -e $RED" FAIL - expected http response: "$1" but got http response: "$status $ERED
	((RES_CONF_FAIL++))
    return 1
}

# Tests if a variable value in the ricsimulator is equal to a target value and and optional timeout.
# Arg: <ric-id> <variable-name> <target-value> - This test set pass or fail depending on if the variable is
# equal to the target or not.
# Arg: <ric-id> <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
# before setting pass or fail depending on if the variable value becomes equal to the target
# value or not.
# (Function for test scripts)
ricmediatorsim_equal() {
	__log_test_fail_not_supported
}

# Print a variable value from the RICMEDIATOR sim.
# args: <ric-id> <variable-name>
# (Function for test scripts)
ricmediatorsim_print() {
	__log_test_info_not_supported
}

# Tests if a variable value in the RICMEDIATOR simulator contains the target string and and optional timeout
# Arg: <ric-id> <variable-name> <target-value> - This test set pass or fail depending on if the variable contains
# the target or not.
# Arg: <ric-id> <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
# before setting pass or fail depending on if the variable value contains the target
# value or not.
# (Function for test scripts)
ricmediatorsim_contains_str() {
	__log_test_fail_not_supported
}

# Simulator API: Put a policy type in a ric
# args: <response-code> <ric-id> <policy-type-id> <policy-type-file>
# (Function for test scripts)
ricmediatorsim_put_policy_type() {
	__log_conf_start $@
	if [ $# -ne 4 ]; then
		__print_err "<response-code> <ric-id> <policy-type-id> <policy-type-file>" $@
		return 1
	fi
	host=$(__find_ricmediatorsim_host $2)
    curlString="curl -X PUT -skw %{http_code} "$host"/A1-P/v2/policytypes/"$3" -H Content-Type:application/json --data-binary @"$4
	__execute_curl_to_ricmediatorsim $1 "$curlString"
	return $?
}

# Simulator API: Delete a policy type in a ric
# <response-code> <ric-id> <policy-type-id>
# (Function for test scripts)
ricmediatorsim_delete_policy_type() {
	__log_conf_start $@
	if [ $# -ne 3 ]; then
		__print_err "<response-code> <ric-id> <policy_type_id>" $@
		return 1
	fi
	host=$(__find_ricmediatorsim_host $2)
    curlString="curl -X DELETE -skw %{http_code} "$host"/A1-P/v2/policytypes/"$3
    __execute_curl_to_ricmediatorsim $1 "$curlString"
	return $?
}

# Simulator API: Delete instances (and status), for one ric
# <response-code> <ric-id>
# (Function for test scripts)
ricmediatorsim_post_delete_instances() {
	__log_test_fail_not_supported
}

# Simulator API: Delete all (instances/types/statuses/settings), for one ric
# <response-code> <ric-id>
# (Function for test scripts)
ricmediatorsim_post_delete_all() {
	__log_test_fail_not_supported
}

# Simulator API: Set (or reset) response code for next A1 message, for one ric
# <response-code> <ric-id> [<forced_response_code>]
# (Function for test scripts)
ricmediatorsim_post_forcedresponse() {
	__log_test_fail_not_supported
}

# Simulator API: Set (or reset) A1 response delay, for one ric
# <response-code> <ric-id> [<delay-in-seconds>]
# (Function for test scripts)
ricmediatorsim_post_forcedelay() {
	__log_test_fail_not_supported
}