| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| |
| # Generic function to query the agent/ICS via the REST or DMAAP interface. |
| # Used by all other agent/ICS api test functions |
| # If operation sufffix is '_BATCH' the the send and get response is split in two sequences, |
| # one for sending the requests and one for receiving the response |
| # but only when using the DMAAP interface |
| # REST or DMAAP is controlled of the base url of $XX_ADAPTER |
| # arg: (PA|ICS|CR|RC GET|PUT|POST|DELETE|GET_BATCH|PUT_BATCH|POST_BATCH|DELETE_BATCH <url>|<correlation-id> [<file> [mime-type]]) | (PA|ICS RESPONSE <correlation-id>) |
| # Default mime type for file is application/json unless specified in parameter mime-type |
| # (Not for test scripts) |
| __do_curl_to_api() { |
| TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S") |
| echo " (${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| proxyflag="" |
| if [ ! -z "$KUBE_PROXY_PATH" ]; then |
| if [ $KUBE_PROXY_HTTPX == "http" ]; then |
| proxyflag=" --proxy $KUBE_PROXY_PATH" |
| else |
| proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH" |
| fi |
| fi |
| |
| paramError=0 |
| input_url=$3 |
| fname=$4 |
| if [ $# -gt 0 ]; then |
| if [ $1 == "PA" ]; then |
| __ADAPTER=$PA_ADAPTER |
| __ADAPTER_TYPE=$PA_ADAPTER_TYPE |
| __RETRY_CODES=$AGENT_RETRY_CODES |
| if [ $PMS_VERSION != "V1" ]; then |
| input_url=$PMS_API_PREFIX$3 |
| fi |
| elif [ $1 == "ICS" ]; then |
| __ADAPTER=$ICS_ADAPTER |
| __ADAPTER_TYPE=$ICS_ADAPTER_TYPE |
| __RETRY_CODES=$ICS_RETRY_CODES |
| elif [ $1 == "CR" ]; then |
| __ADAPTER=$CR_ADAPTER |
| __ADAPTER_TYPE=$CR_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "RC" ]; then |
| __ADAPTER=$RC_ADAPTER |
| __ADAPTER_TYPE=$RC_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "NGW" ]; then |
| __ADAPTER=$NGW_ADAPTER |
| __ADAPTER_TYPE=$NGW_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "DMAAPADP" ]; then |
| __ADAPTER=$DMAAP_ADP_ADAPTER |
| __ADAPTER_TYPE=$DMAAP_ADP_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "DMAAPMED" ]; then |
| __ADAPTER=$DMAAP_MED_ADAPTER |
| __ADAPTER_TYPE=$DMAAP_MED_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "MRSTUB" ]; then |
| __ADAPTER=$MR_STUB_ADAPTER |
| __ADAPTER_TYPE=$MR_STUB_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "DMAAPMR" ]; then |
| __ADAPTER=$MR_DMAAP_ADAPTER_HTTP |
| __ADAPTER_TYPE=$MR_DMAAP_ADAPTER_TYPE |
| __RETRY_CODES="" |
| elif [ $1 == "KAFKAPC" ]; then |
| __ADAPTER=$KAFKAPC_ADAPTER |
| __ADAPTER_TYPE=$KAFKAPC_ADAPTER_TYPE |
| __RETRY_CODES="" |
| else |
| paramError=1 |
| fi |
| if [ "$__ADAPTER_TYPE" == "MR-HTTP" ]; then |
| __ADAPTER=$MR_ADAPTER_HTTP |
| fi |
| if [ "$__ADAPTER_TYPE" == "MR-HTTPS" ]; then |
| __ADAPTER=$MR_ADAPTER_HTTPS |
| fi |
| fi |
| if [ $# -lt 3 ] || [ $# -gt 5 ]; then |
| paramError=1 |
| else |
| timeout="" |
| oper="" |
| file='' |
| httpcode=" -sw %{http_code}" |
| accept='' |
| content='' |
| batch=0 |
| if [[ $2 == *"_BATCH" ]]; then |
| batch=1 |
| fi |
| if [ $# -gt 3 ]; then |
| content=" -H Content-Type:application/json" |
| fname=$4 |
| if [ $# -gt 4 ]; then |
| content=" -H Content-Type:"$5 |
| fi |
| fi |
| if [ $2 == "GET" ] || [ $2 == "GET_BATCH" ]; then |
| oper="GET" |
| if [ $# -ne 3 ]; then |
| paramError=1 |
| fi |
| elif [ $2 == "PUT" ] || [ $2 == "PUT_BATCH" ]; then |
| oper="PUT" |
| if [ $# -gt 3 ]; then |
| file=" --data-binary @$fname" |
| fi |
| accept=" -H accept:application/json" |
| elif [ $2 == "POST" ] || [ $2 == "POST_BATCH" ]; then |
| oper="POST" |
| accept=" -H accept:*/*" |
| if [ $# -gt 3 ]; then |
| file=" --data-binary @$fname" |
| accept=" -H accept:application/json" |
| fi |
| elif [ $2 == "DELETE" ] || [ $2 == "DELETE_BATCH" ]; then |
| oper="DELETE" |
| if [ $# -ne 3 ]; then |
| paramError=1 |
| fi |
| elif [ $2 == "RESPONSE" ]; then |
| oper="RESPONSE" |
| if [ $# -ne 3 ]; then |
| paramError=1 |
| fi |
| if [ $__ADAPTER_TYPE == "REST" ]; then |
| paramError=1 |
| fi |
| else |
| paramError=1 |
| fi |
| fi |
| |
| if [ $paramError -eq 1 ]; then |
| ((RES_CONF_FAIL++)) |
| echo "-Incorrect number of parameters to __do_curl_to_api " $@ >> $HTTPLOG |
| echo "-Expected: (PA|ICS GET|PUT|POST|DELETE|GET_BATCH|PUT_BATCH|POST_BATCH|DELETE_BATCH <url> [<file> [mime-type]]) | (PA|ICS RESPONSE <correlation-id>)" >> $HTTPLOG |
| echo "-Returning response 000" >> $HTTPLOG |
| echo "-000" |
| return 1 |
| fi |
| |
| if [ $__ADAPTER_TYPE == "REST" ]; then |
| url=" "${__ADAPTER}${input_url} |
| oper=" -X "$oper |
| curlString="curl -k $proxyflag "${oper}${timeout}${httpcode}${accept}${content}${url}${file} |
| echo " CMD: "$curlString >> $HTTPLOG |
| if [ $# -gt 3 ]; then |
| echo " FILE: $(<$fname)" >> $HTTPLOG |
| fi |
| |
| # Do retry for configured response codes, otherwise only one attempt |
| maxretries=5 |
| while [ $maxretries -ge 0 ]; do |
| |
| let maxretries=maxretries-1 |
| res=$($curlString) |
| retcode=$? |
| if [ $retcode -ne 0 ]; then |
| echo " RETCODE: "$retcode >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| retry=0 |
| echo " RESP: "$res >> $HTTPLOG |
| status=${res:${#res}-3} |
| if [ ! -z "${__RETRY_CODES}" ]; then |
| for retrycode in $__RETRY_CODES; do |
| if [ $retrycode -eq $status ]; then |
| echo -e $RED" Retrying (according to set codes for retry), got status $status....."$ERED >> $HTTPLOG |
| sleep 1 |
| retry=1 |
| fi |
| done |
| fi |
| if [ $retry -eq 0 ]; then |
| maxretries=-1 |
| fi |
| done |
| echo $res |
| return 0 |
| else |
| if [ $oper != "RESPONSE" ]; then |
| requestUrl=$input_url |
| if [ $2 == "PUT" ] && [ $# -gt 3 ]; then |
| payload="$(cat $fname | tr -d '\n' | tr -d ' ' )" |
| echo "payload: "$payload >> $HTTPLOG |
| file=" --data-binary "$payload |
| elif [ $# -gt 3 ]; then |
| echo " FILE: $(cat $fname)" >> $HTTPLOG |
| fi |
| #urlencode the request url since it will be carried by send-request url |
| requestUrl=$(python3 -c "from __future__ import print_function; import urllib.parse, sys; print(urllib.parse.quote(sys.argv[1]))" "$input_url") |
| url=" "${__ADAPTER}"/send-request?url="${requestUrl}"&operation="${oper} |
| curlString="curl -k $proxyflag -X POST${timeout}${httpcode}${content}${url}${file}" |
| echo " CMD: "$curlString >> $HTTPLOG |
| res=$($curlString) |
| retcode=$? |
| if [ $retcode -ne 0 ]; then |
| echo " RETCODE: "$retcode >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| echo " RESP: "$res >> $HTTPLOG |
| status=${res:${#res}-3} |
| if [ $status -ne 200 ]; then |
| echo "000" |
| return 1 |
| fi |
| cid=${res:0:${#res}-3} |
| if [[ $batch -eq 1 ]]; then |
| echo $cid"200" |
| return 0 |
| fi |
| fi |
| if [ $oper == "RESPONSE" ] || [ $batch -eq 0 ]; then |
| if [ $oper == "RESPONSE" ]; then |
| cid=$3 |
| fi |
| url=" "${__ADAPTER}"/receive-response?correlationid="${cid} |
| curlString="curl -k $proxyflag -X GET"${timeout}${httpcode}${url} |
| echo " CMD: "$curlString >> $HTTPLOG |
| res=$($curlString) |
| retcode=$? |
| if [ $retcode -ne 0 ]; then |
| echo " RETCODE: "$retcode >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| echo " RESP: "$res >> $HTTPLOG |
| status=${res:${#res}-3} |
| TS=$SECONDS |
| # wait of the reply from the agent/ICS... |
| while [ $status -eq 204 ]; do |
| if [ $(($SECONDS - $TS)) -gt 90 ]; then |
| echo " RETCODE: (timeout after 90s)" >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| sleep 0.01 |
| echo " CMD: "$curlString >> $HTTPLOG |
| res=$($curlString) |
| if [ $retcode -ne 0 ]; then |
| echo " RETCODE: "$retcode >> $HTTPLOG |
| echo "000" |
| return 1 |
| fi |
| echo " RESP: "$res >> $HTTPLOG |
| status=${res:${#res}-3} |
| done |
| if [ $status -eq 200 ]; then |
| body=${res:0:${#res}-3} |
| echo $body |
| return 0 |
| fi |
| echo "Status not 200, returning response 000" >> $HTTPLOG |
| echo "0000" |
| return 1 |
| fi |
| fi |
| } |