test/common/helmmanager_api_functions.sh - oransc/nonrtric - Gitiles

 #!/bin/bash

 #  ============LICENSE_START===============================================
 #  Copyright (C) 2021 Nordix Foundation. All rights reserved.
 #  ========================================================================
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #  ============LICENSE_END=================================================
 #

 # This is a script that contains container/service managemnt functions test functions for Helm Manager

 ################ Test engine functions ################

 # Create the image var used during the test
 # arg: [<image-tag-suffix>] (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __HELMMANAGER_imagesetup() {
 	__check_and_create_image_var HELMMANAGER "HELM_MANAGER_IMAGE" "HELM_MANAGER_IMAGE_BASE" "HELM_MANAGER_IMAGE_TAG" $1 "$HELM_MANAGER_DISPLAY_NAME"
 }

 # Pull image from remote repo or use locally built image
 # arg: <pull-policy-override> <pull-policy-original>
 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
 # <pull-policy-original> Shall be used for images that does not allow overriding
 # Both arg var may contain: 'remote', 'remote-remove' or 'local'
 __HELMMANAGER_imagepull() {
 	__check_and_pull_image $1 "$HELM_MANAGER_DISPLAY_NAME" $HELM_MANAGER_APP_NAME HELM_MANAGER_IMAGE
 }

 # Generate a string for each included image using the app display name and a docker images format string
 # If a custom image repo is used then also the source image from the local repo is listed
 # arg: <docker-images-format-string> <file-to-append>
 __HELMMANAGER_image_data() {
 	echo -e "$HELM_MANAGER_DISPLAY_NAME\t$(docker images --format $1 $HELM_MANAGER_IMAGE)" >>   $2
 	if [ ! -z "$HELM_MANAGER_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $HELM_MANAGER_IMAGE_SOURCE)" >>   $2
 	fi
 }

 # Scale kubernetes resources to zero
 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 # This function is called for apps fully managed by the test script
 __HELMMANAGER_kube_scale_zero() {
 	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest HELMMANAGER
 }

 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 # This function is called for prestarted apps not managed by the test script.
 __HELMMANAGER_kube_scale_zero_and_wait() {
 	__kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-"$HELM_MANAGER_APP_NAME"
 }

 # Delete all kube resouces for the app
 # This function is called for apps managed by the test script.
 __HELMMANAGER_kube_delete_all() {
 	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest HELMMANAGER
 }

 # Store docker logs
 # This function is called for apps managed by the test script.
 # args: <log-dir> <file-prexix>
 __HELMMANAGER_store_docker_logs() {
 	if [ $RUNMODE == "KUBE" ]; then
 		kubectl $KUBECONF  logs -l "autotest=HELMMANAGER" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_helmmanager.log 2>&1
 	else
 		docker logs $HELM_MANAGER_APP_NAME > $1$2_helmmanager.log 2>&1
 	fi
 }

 # Initial setup of protocol, host and ports
 # This function is called for apps managed by the test script.
 # args: -
 __HELMMANAGER_initial_setup() {
 	use_helm_manager_http
 }

 # Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
 # For docker, the namespace shall be excluded
 # This function is called for apps managed by the test script as well as for prestarted apps.
 # args: -
 __HELMMANAGER_statisics_setup() {
 	if [ $RUNMODE == "KUBE" ]; then
 		echo "HELMMANAGER $HELM_MANAGER_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
 	else
 		echo "HELMMANAGER $HELM_MANAGER_APP_NAME"
 	fi
 }

 # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
 # args: -
 __HELMMANAGER_test_requirements() {
 	tmp=$(which helm)
 	if [ $? -ne 0 ]; then
 		echo $RED" Helm3 is required for running helm manager tests. Pls install helm3"
 		exit 1
 	fi
 	tmp_version=$(helm version | grep 'v3')
 	if [ -z "$tmp_version" ]; then
 		echo $RED" Helm3 is required for running helm manager tests. Pls install helm3"
 		exit 1
 	fi
 }

 #######################################################

 # Set http as the protocol to use for all communication to the Helm Manager
 # args: -
 # (Function for test scripts)
 use_helm_manager_http() {
 	__helm_manager_set_protocoll "http" $HELM_MANAGER_INTERNAL_PORT $HELM_MANAGER_EXTERNAL_PORT
 }

 # Set https as the protocol to use for all communication to the Helm Manager
 # args: -
 # (Function for test scripts)
 use_helm_manager_https() {
 	__helm_manager_set_protocoll "https" $HELM_MANAGER_INTERNAL_SECURE_PORT $HELM_MANAGER_EXTERNAL_SECURE_PORT
 }

 # Setup paths to svc/container for internal and external access
 # args: <protocol> <internal-port> <external-port>
 __helm_manager_set_protocoll() {
 	echo -e $BOLD"$HELM_MANAGER_DISPLAY_NAME protocol setting"$EBOLD
 	echo -e " Using $BOLD $1 $EBOLD towards $HELM_MANAGER_DISPLAY_NAME"

 	## Access to Helm Manager

 	HELMMANAGER_SERVICE_PATH=$1"://$HELM_MANAGER_USER:$HELM_MANAGER_PWD@"$HELM_MANAGER_APP_NAME":"$2  # docker access, container->container and script->container via proxy
 	if [ $RUNMODE == "KUBE" ]; then
 		HELMMANAGER_SERVICE_PATH=$1"://$HELM_MANAGER_USER:$HELM_MANAGER_PWD@"$HELM_MANAGER_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
 	fi

 	echo ""
 }

 # Export env vars for config files, docker compose and kube resources
 # args:
 __helm_manager_export_vars() {

 	export HELM_MANAGER_APP_NAME
 	export HELM_MANAGER_DISPLAY_NAME

 	export DOCKER_SIM_NWNAME
 	export KUBE_NONRTRIC_NAMESPACE

 	export HELM_MANAGER_EXTERNAL_PORT
 	export HELM_MANAGER_INTERNAL_PORT
 	export HELM_MANAGER_EXTERNAL_SECURE_PORT
 	export HELM_MANAGER_INTERNAL_SECURE_PORT
 	export HELM_MANAGER_CLUSTER_ROLE
 	export HELM_MANAGER_SA_NAME
 	export HELM_MANAGER_ALIVE_URL
 	export HELM_MANAGER_COMPOSE_DIR
 	export HELM_MANAGER_USER
 	export HELM_MANAGER_PWD
 }

 # Start the Helm Manager container
 # args: -
 # (Function for test scripts)
 start_helm_manager() {

 	echo -e $BOLD"Starting $HELM_MANAGER_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then

 		# Check if app shall be fully managed by the test script
 		__check_included_image "HELMMANAGER"
 		retcode_i=$?

 		# Check if app shall only be used by the testscipt
 		__check_prestarted_image "HELMMANAGER"
 		retcode_p=$?

 		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
 			echo -e $RED"The $HELM_MANAGER_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
 			echo -e $RED"The $HELM_MANAGER_APP_NAME will not be started"$ERED
 			exit
 		fi
 		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
 			echo -e $RED"The $HELM_MANAGER_APP_NAME app is included both as managed and prestarted in this test script"$ERED
 			echo -e $RED"The $HELM_MANAGER_APP_NAME will not be started"$ERED
 			exit
 		fi

 		if [ $retcode_p -eq 0 ]; then
 			echo -e " Using existing $HELM_MANAGER_APP_NAME deployment and service"
 			echo " Setting $HELM_MANAGER_APP_NAME replicas=1"
 			__kube_scale sts $HELM_MANAGER_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
 		fi

 		if [ $retcode_i -eq 0 ]; then

 			echo -e " Creating $HELM_MANAGER_APP_NAME app and expose service"

 			#Check if nonrtric namespace exists, if not create it
 			__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

 			__helm_manager_export_vars

 			#Create sa
 			input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"sa.yaml
 			output_yaml=$PWD/tmp/helmmanager_sa_svc.yaml
 			__kube_create_instance sa $HELM_MANAGER_APP_NAME $input_yaml $output_yaml

 			#Create service
 			input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"svc.yaml
 			output_yaml=$PWD/tmp/helmmanager_svc.yaml
 			__kube_create_instance service $HELM_MANAGER_APP_NAME $input_yaml $output_yaml

 			#Create app
 			input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"app.yaml
 			output_yaml=$PWD/tmp/helmmanager_app.yaml
 			__kube_create_instance app $HELM_MANAGER_APP_NAME $input_yaml $output_yaml
 		fi

 		__check_service_start $HELM_MANAGER_APP_NAME $HELMMANAGER_SERVICE_PATH$HELM_MANAGER_ALIVE_URL

 	else
 		__check_included_image 'HELMMANAGER'
 		if [ $? -eq 1 ]; then
 			echo -e $RED"The Helm Manager app is not included as managed in this test script"$ERED
 			echo -e $RED"The Helm Manager will not be started"$ERED
 			exit
 		fi

 		__helm_manager_export_vars

 		__start_container $HELM_MANAGER_COMPOSE_DIR "" NODOCKERARGS 1 $HELM_MANAGER_APP_NAME

 		__check_service_start $HELM_MANAGER_APP_NAME $HELMMANAGER_SERVICE_PATH$HELM_MANAGER_ALIVE_URL
 	fi
 	echo ""
 }

 # Excute a curl cmd towards the helm manager.
 # args: GET <path>
 # args: POST <path> <file-to-post>
 # args: POST3 <path> <name> <file-to-post> <name> <file-to-post> <name> <file-to-post>
 __execute_curl_to_helmmanger() {
     TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
     echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
 	proxyflag=""
 	if [ ! -z "$KUBE_PROXY_PATH" ]; then
 		if [ $KUBE_PROXY_HTTPX == "http" ]; then
 			proxyflag=" --proxy $KUBE_PROXY_PATH"
 		else
 			proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
 		fi
 	fi
 	if [ $1 == "GET" ]; then
 		curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2"
 	elif [ $1 == "POST" ]; then
 		curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X POST --data-binary @$3 -H Content-Type:application/json"
 	elif [ $1 == "POST1_2" ]; then
 		curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X POST -F $3=<$4 -F $5=@$6 -F $7=@$8 "
 	elif [ $1 == "DELETE" ]; then
 		curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X DELETE"
 	else
 		echo " Unknown operation $1" >> $HTTPLOG
 		echo "000"
 		return 1
 	fi
 	echo " CMD: $curlstring" >> $HTTPLOG
 	res="$($curlstring)"
 	retcode=$?
 	echo " RESP: $res" >> $HTTPLOG
     if [ $retcode -ne 0 ]; then
         echo "000"
 		return 1
     fi
     echo $res
 	return 0
 }

 # API Test function: GET /helm/charts
 # args: <response-code> [ EMPTY | ( <chart> <version> <namespace> <release> <repo> )+ ]
 # (Function for test scripts)
 helm_manager_api_get_charts() {
 	__log_test_start $@

 	error_params=1
 	variablecount=$(($#-1))
     if [ $# -eq 1 ]; then
 		error_params=0
 	elif [ $# -eq 2 ] && [ $2 == "EMPTY" ]; then
 		error_params=0
 	elif [ $(($variablecount%5)) -eq 0 ]; then
 		error_params=0
 	fi


 	if [ $error_params -eq 1 ]; then
 		__print_err "<response-code>" $@
 		return 1
 	fi

 	query="/helm/charts"
     res="$(__execute_curl_to_helmmanger GET $query)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	if [ $# -gt 1 ]; then
 		body=${res:0:${#res}-3}
 		shift
 		if [ $# -eq 1 ]; then
 			targetJson='{"charts":[]}'
 		else
 			targetJson='{"charts":['
 			arr=(${@})
 			for ((i=0; i<$#; i=i+5)); do
 				if [ "$i" -gt 0 ]; then
 					targetJson=$targetJson","
 				fi
 				chart_version=${arr[$i+2]}
 				if [ $chart_version == "DEFAULT-VERSION" ]; then
 					chart_version="0.1.0"
 				fi
 				targetJson=$targetJson'{"releaseName":"'${arr[$i+3]}'","chartId":{"name":"'${arr[$i+1]}'","version":"'0.1.0'"},"namespace":"'${arr[$i+4]}'","repository":{"repoName":"'${arr[$i+0]}'","protocol":null,"address":null,"port":null,"userName":null,"password":null},"overrideParams":null}'
 			done
 			targetJson=$targetJson']}'
 		fi
 		echo " TARGET JSON: $targetJson" >> $HTTPLOG
 		res=$(python3 ../common/compare_json.py "$targetJson" "$body")

 		if [ $res -ne 0 ]; then
 			__log_test_fail_body
 			return 1
 		fi
 	fi

 	__log_test_pass
 	return 0
 }

 # API Test function: POST /helm/repo - add repo
 # args: <response-code> <repo-name> <repo-protocol> <repo-address> <repo-port>
 # (Function for test scripts)
 helm_manager_api_post_repo() {
 	__log_test_start $@

     if [ $# -ne 5 ]; then
 		__print_err "<response-code> <repo-name> <repo-protocol> <repo-address> <repo-port>" $@
 		return 1
 	fi

 	query="/helm/repo"
 	file="./tmp/cm-repo.json"
 	file_data='{"address" : "'$4'","repoName": "'$2'","protocol": "'$3'","port": "'$5'"}'
 	echo $file_data > $file
 	echo " FILE: $file_data" >> $HTTPLOG
     res="$(__execute_curl_to_helmmanger POST $query $file)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # API Test function: POST /helm/onboard/chart - onboard chart
 # args: <response-code> <repo> <chart> <version> <release> <namespace>
 # (Function for test scripts)
 helm_manager_api_post_onboard_chart() {
 	__log_test_start $@

     if [ $# -ne 6 ]; then
 		__print_err "<response-code> <repo> <chart> <version> <release> <namespace> " $@
 		return 1
 	fi

 	query="/helm/onboard/chart"
 	file="./tmp/chart.json"
 	chart_version=$4
 	if [ $chart_version == "DEFAULT-VERSION" ]; then
 		chart_version="0.1.0"
 	fi
 	file_data='{"chartId":{"name":"'$3'","version":"'$chart_version'"},"namespace":"'$6'","repository":{"repoName":"'$2'"},"releaseName":"'$5'"}'
 	echo $file_data > $file
 	echo " FILE - ($file): $file_data" >> $HTTPLOG
 	file2="./tmp/override.yaml"
 	echo "" >> $file2
 	file3="$TESTENV_TEMP_FILES/"$3"-"$chart_version".tgz"
     res="$(__execute_curl_to_helmmanger POST1_2 $query info $file values $file2 chart $file3)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # API Test function: POST /helm/install - install chart
 # args: <response-code> <chart> <version>
 # (Function for test scripts)
 helm_manager_api_post_install_chart() {
 	__log_test_start $@

     if [ $# -ne 3 ]; then
 		__print_err "<response-code> <chart> <version>" $@
 		return 1
 	fi

 	query="/helm/install"
 	file="./tmp/app-installation.json"
 	chart_version=$3
 	if [ $chart_version == "DEFAULT-VERSION" ]; then
 		chart_version="0.1.0"
 	fi
 	file_data='{"name": "'$2'","version": "'$chart_version'"}'
 	echo $file_data > $file
 	echo " FILE - ($file): $file_data" >> $HTTPLOG
     res="$(__execute_curl_to_helmmanger POST $query $file)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # API Test function: DELETE /helm/uninstall - uninstall chart
 # args: <response-code> <chart> <version>
 # (Function for test scripts)
 helm_manager_api_uninstall_chart() {
 	__log_test_start $@

     if [ $# -ne 3 ]; then
 		__print_err "<response-code> <chart> <version> " $@
 		return 1
 	fi

 	chart_version=$3
 	if [ $chart_version == "DEFAULT-VERSION" ]; then
 		chart_version="0.1.0"
 	fi
 	query="/helm/uninstall/$2/$chart_version"
     res="$(__execute_curl_to_helmmanger DELETE $query)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # API Test function: DELETE /helm/chart - delete chart
 # args: <response-code> <chart> <version>
 # (Function for test scripts)
 helm_manager_api_delete_chart() {
 	__log_test_start $@

     if [ $# -ne 3 ]; then
 		__print_err "<response-code> <chart> <version> " $@
 		return 1
 	fi

 	chart_version=$3
 	if [ $chart_version == "DEFAULT-VERSION" ]; then
 		chart_version="0.1.0"
 	fi
 	query="/helm/chart/$2/$chart_version"
     res="$(__execute_curl_to_helmmanger DELETE $query)"
     status=${res:${#res}-3}

 	if [ $status -ne $1 ]; then
 		__log_test_fail_status_code $1 $status
 		return 1
 	fi

 	__log_test_pass
 	return 0
 }

 # Config function: Add repo in helm manager by helm using exec
 # args: <repo-name> <repo-url>
 # (Function for test scripts)
 helm_manager_api_exec_add_repo() {
 	__log_conf_start $@

     if [ $# -ne 2 ]; then
 		__print_err "<repo-name> <repo-url>" $@
 		return 1
 	fi

 	if [ $RUNMODE == "DOCKER" ]; then
 		retmsg=$(docker exec -it $HELM_MANAGER_APP_NAME helm repo add $1 $2)
 		retcode=$?
 		if [ $retcode -ne 0 ]; then
 			__log_conf_fail_general " Cannot add repo to helm, return code: $retcode, msg: $retmsg"
 			return 1
 		fi
 	else
 		retmsg=$(kubectl $KUBECONF exec -it $HELM_MANAGER_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE -- helm repo add $1 $2)
 		retcode=$?
 		if [ $retcode -ne 0 ]; then
 			__log_conf_fail_general " Cannot add repo to helm, return code: $retcode, msg: $retmsg"
 			return 1
 		fi
 	fi
 	__log_conf_ok
 	return 0
 }
	#!/bin/bash

	# ============LICENSE_START===============================================
	# Copyright (C) 2021 Nordix Foundation. All rights reserved.
	# ========================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=================================================
	#

	# This is a script that contains container/service managemnt functions test functions for Helm Manager

	################ Test engine functions ################

	# Create the image var used during the test
	# arg: [<image-tag-suffix>] (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__HELMMANAGER_imagesetup() {
	__check_and_create_image_var HELMMANAGER "HELM_MANAGER_IMAGE" "HELM_MANAGER_IMAGE_BASE" "HELM_MANAGER_IMAGE_TAG" $1 "$HELM_MANAGER_DISPLAY_NAME"
	}

	# Pull image from remote repo or use locally built image
	# arg: <pull-policy-override> <pull-policy-original>
	# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
	# <pull-policy-original> Shall be used for images that does not allow overriding
	# Both arg var may contain: 'remote', 'remote-remove' or 'local'
	__HELMMANAGER_imagepull() {
	__check_and_pull_image $1 "$HELM_MANAGER_DISPLAY_NAME" $HELM_MANAGER_APP_NAME HELM_MANAGER_IMAGE
	}

	# Generate a string for each included image using the app display name and a docker images format string
	# If a custom image repo is used then also the source image from the local repo is listed
	# arg: <docker-images-format-string> <file-to-append>
	__HELMMANAGER_image_data() {
	echo -e "$HELM_MANAGER_DISPLAY_NAME\t$(docker images --format $1 $HELM_MANAGER_IMAGE)" >> $2
	if [ ! -z "$HELM_MANAGER_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $HELM_MANAGER_IMAGE_SOURCE)" >> $2
	fi
	}

	# Scale kubernetes resources to zero
	# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
	# This function is called for apps fully managed by the test script
	__HELMMANAGER_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest HELMMANAGER
	}

	# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
	# This function is called for prestarted apps not managed by the test script.
	__HELMMANAGER_kube_scale_zero_and_wait() {
	__kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-"$HELM_MANAGER_APP_NAME"
	}

	# Delete all kube resouces for the app
	# This function is called for apps managed by the test script.
	__HELMMANAGER_kube_delete_all() {
	__kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest HELMMANAGER
	}

	# Store docker logs
	# This function is called for apps managed by the test script.
	# args: <log-dir> <file-prexix>
	__HELMMANAGER_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
	kubectl $KUBECONF logs -l "autotest=HELMMANAGER" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_helmmanager.log 2>&1
	else
	docker logs $HELM_MANAGER_APP_NAME > $1$2_helmmanager.log 2>&1
	fi
	}

	# Initial setup of protocol, host and ports
	# This function is called for apps managed by the test script.
	# args: -
	__HELMMANAGER_initial_setup() {
	use_helm_manager_http
	}

	# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
	# For docker, the namespace shall be excluded
	# This function is called for apps managed by the test script as well as for prestarted apps.
	# args: -
	__HELMMANAGER_statisics_setup() {
	if [ $RUNMODE == "KUBE" ]; then
	echo "HELMMANAGER $HELM_MANAGER_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
	else
	echo "HELMMANAGER $HELM_MANAGER_APP_NAME"
	fi
	}

	# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
	# args: -
	__HELMMANAGER_test_requirements() {
	tmp=$(which helm)
	if [ $? -ne 0 ]; then
	echo $RED" Helm3 is required for running helm manager tests. Pls install helm3"
	exit 1
	fi
	tmp_version=$(helm version \| grep 'v3')
	if [ -z "$tmp_version" ]; then
	echo $RED" Helm3 is required for running helm manager tests. Pls install helm3"
	exit 1
	fi
	}

	#######################################################

	# Set http as the protocol to use for all communication to the Helm Manager
	# args: -
	# (Function for test scripts)
	use_helm_manager_http() {
	__helm_manager_set_protocoll "http" $HELM_MANAGER_INTERNAL_PORT $HELM_MANAGER_EXTERNAL_PORT
	}

	# Set https as the protocol to use for all communication to the Helm Manager
	# args: -
	# (Function for test scripts)
	use_helm_manager_https() {
	__helm_manager_set_protocoll "https" $HELM_MANAGER_INTERNAL_SECURE_PORT $HELM_MANAGER_EXTERNAL_SECURE_PORT
	}

	# Setup paths to svc/container for internal and external access
	# args: <protocol> <internal-port> <external-port>
	__helm_manager_set_protocoll() {
	echo -e $BOLD"$HELM_MANAGER_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD $1 $EBOLD towards $HELM_MANAGER_DISPLAY_NAME"

	## Access to Helm Manager

	HELMMANAGER_SERVICE_PATH=$1"://$HELM_MANAGER_USER:$HELM_MANAGER_PWD@"$HELM_MANAGER_APP_NAME":"$2 # docker access, container->container and script->container via proxy
	if [ $RUNMODE == "KUBE" ]; then
	HELMMANAGER_SERVICE_PATH=$1"://$HELM_MANAGER_USER:$HELM_MANAGER_PWD@"$HELM_MANAGER_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
	fi

	echo ""
	}

	# Export env vars for config files, docker compose and kube resources
	# args:
	__helm_manager_export_vars() {

	export HELM_MANAGER_APP_NAME
	export HELM_MANAGER_DISPLAY_NAME

	export DOCKER_SIM_NWNAME
	export KUBE_NONRTRIC_NAMESPACE

	export HELM_MANAGER_EXTERNAL_PORT
	export HELM_MANAGER_INTERNAL_PORT
	export HELM_MANAGER_EXTERNAL_SECURE_PORT
	export HELM_MANAGER_INTERNAL_SECURE_PORT
	export HELM_MANAGER_CLUSTER_ROLE
	export HELM_MANAGER_SA_NAME
	export HELM_MANAGER_ALIVE_URL
	export HELM_MANAGER_COMPOSE_DIR
	export HELM_MANAGER_USER
	export HELM_MANAGER_PWD
	}

	# Start the Helm Manager container
	# args: -
	# (Function for test scripts)
	start_helm_manager() {

	echo -e $BOLD"Starting $HELM_MANAGER_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

	# Check if app shall be fully managed by the test script
	__check_included_image "HELMMANAGER"
	retcode_i=$?

	# Check if app shall only be used by the testscipt
	__check_prestarted_image "HELMMANAGER"
	retcode_p=$?

	if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
	echo -e $RED"The $HELM_MANAGER_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
	echo -e $RED"The $HELM_MANAGER_APP_NAME will not be started"$ERED
	exit
	fi
	if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
	echo -e $RED"The $HELM_MANAGER_APP_NAME app is included both as managed and prestarted in this test script"$ERED
	echo -e $RED"The $HELM_MANAGER_APP_NAME will not be started"$ERED
	exit
	fi

	if [ $retcode_p -eq 0 ]; then
	echo -e " Using existing $HELM_MANAGER_APP_NAME deployment and service"
	echo " Setting $HELM_MANAGER_APP_NAME replicas=1"
	__kube_scale sts $HELM_MANAGER_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
	fi

	if [ $retcode_i -eq 0 ]; then

	echo -e " Creating $HELM_MANAGER_APP_NAME app and expose service"

	#Check if nonrtric namespace exists, if not create it
	__kube_create_namespace $KUBE_NONRTRIC_NAMESPACE

	__helm_manager_export_vars

	#Create sa
	input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"sa.yaml
	output_yaml=$PWD/tmp/helmmanager_sa_svc.yaml
	__kube_create_instance sa $HELM_MANAGER_APP_NAME $input_yaml $output_yaml

	#Create service
	input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"svc.yaml
	output_yaml=$PWD/tmp/helmmanager_svc.yaml
	__kube_create_instance service $HELM_MANAGER_APP_NAME $input_yaml $output_yaml

	#Create app
	input_yaml=$SIM_GROUP"/"$HELM_MANAGER_COMPOSE_DIR"/"app.yaml
	output_yaml=$PWD/tmp/helmmanager_app.yaml
	__kube_create_instance app $HELM_MANAGER_APP_NAME $input_yaml $output_yaml
	fi

	__check_service_start $HELM_MANAGER_APP_NAME $HELMMANAGER_SERVICE_PATH$HELM_MANAGER_ALIVE_URL

	else
	__check_included_image 'HELMMANAGER'
	if [ $? -eq 1 ]; then
	echo -e $RED"The Helm Manager app is not included as managed in this test script"$ERED
	echo -e $RED"The Helm Manager will not be started"$ERED
	exit
	fi

	__helm_manager_export_vars

	__start_container $HELM_MANAGER_COMPOSE_DIR "" NODOCKERARGS 1 $HELM_MANAGER_APP_NAME

	__check_service_start $HELM_MANAGER_APP_NAME $HELMMANAGER_SERVICE_PATH$HELM_MANAGER_ALIVE_URL
	fi
	echo ""
	}

	# Excute a curl cmd towards the helm manager.
	# args: GET <path>
	# args: POST <path> <file-to-post>
	# args: POST3 <path> <name> <file-to-post> <name> <file-to-post> <name> <file-to-post>
	__execute_curl_to_helmmanger() {
	TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
	echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
	proxyflag=""
	if [ ! -z "$KUBE_PROXY_PATH" ]; then
	if [ $KUBE_PROXY_HTTPX == "http" ]; then
	proxyflag=" --proxy $KUBE_PROXY_PATH"
	else
	proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
	fi
	fi
	if [ $1 == "GET" ]; then
	curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2"
	elif [ $1 == "POST" ]; then
	curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X POST --data-binary @$3 -H Content-Type:application/json"
	elif [ $1 == "POST1_2" ]; then
	curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X POST -F $3=<$4 -F $5=@$6 -F $7=@$8 "
	elif [ $1 == "DELETE" ]; then
	curlstring="curl -skw %{http_code} $proxyflag $HELMMANAGER_SERVICE_PATH$2 -X DELETE"
	else
	echo " Unknown operation $1" >> $HTTPLOG
	echo "000"
	return 1
	fi
	echo " CMD: $curlstring" >> $HTTPLOG
	res="$($curlstring)"
	retcode=$?
	echo " RESP: $res" >> $HTTPLOG
	if [ $retcode -ne 0 ]; then
	echo "000"
	return 1
	fi
	echo $res
	return 0
	}

	# API Test function: GET /helm/charts
	# args: <response-code> [ EMPTY \| ( <chart> <version> <namespace> <release> <repo> )+ ]
	# (Function for test scripts)
	helm_manager_api_get_charts() {
	__log_test_start $@

	error_params=1
	variablecount=$(($#-1))
	if [ $# -eq 1 ]; then
	error_params=0
	elif [ $# -eq 2 ] && [ $2 == "EMPTY" ]; then
	error_params=0
	elif [ $(($variablecount%5)) -eq 0 ]; then
	error_params=0
	fi


	if [ $error_params -eq 1 ]; then
	__print_err "<response-code>" $@
	return 1
	fi

	query="/helm/charts"
	res="$(__execute_curl_to_helmmanger GET $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	if [ $# -gt 1 ]; then
	body=${res:0:${#res}-3}
	shift
	if [ $# -eq 1 ]; then
	targetJson='{"charts":[]}'
	else
	targetJson='{"charts":['
	arr=(${@})
	for ((i=0; i<$#; i=i+5)); do
	if [ "$i" -gt 0 ]; then
	targetJson=$targetJson","
	fi
	chart_version=${arr[$i+2]}
	if [ $chart_version == "DEFAULT-VERSION" ]; then
	chart_version="0.1.0"
	fi
	targetJson=$targetJson'{"releaseName":"'${arr[$i+3]}'","chartId":{"name":"'${arr[$i+1]}'","version":"'0.1.0'"},"namespace":"'${arr[$i+4]}'","repository":{"repoName":"'${arr[$i+0]}'","protocol":null,"address":null,"port":null,"userName":null,"password":null},"overrideParams":null}'
	done
	targetJson=$targetJson']}'
	fi
	echo " TARGET JSON: $targetJson" >> $HTTPLOG
	res=$(python3 ../common/compare_json.py "$targetJson" "$body")

	if [ $res -ne 0 ]; then
	__log_test_fail_body
	return 1
	fi
	fi

	__log_test_pass
	return 0
	}

	# API Test function: POST /helm/repo - add repo
	# args: <response-code> <repo-name> <repo-protocol> <repo-address> <repo-port>
	# (Function for test scripts)
	helm_manager_api_post_repo() {
	__log_test_start $@

	if [ $# -ne 5 ]; then
	__print_err "<response-code> <repo-name> <repo-protocol> <repo-address> <repo-port>" $@
	return 1
	fi

	query="/helm/repo"
	file="./tmp/cm-repo.json"
	file_data='{"address" : "'$4'","repoName": "'$2'","protocol": "'$3'","port": "'$5'"}'
	echo $file_data > $file
	echo " FILE: $file_data" >> $HTTPLOG
	res="$(__execute_curl_to_helmmanger POST $query $file)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# API Test function: POST /helm/onboard/chart - onboard chart
	# args: <response-code> <repo> <chart> <version> <release> <namespace>
	# (Function for test scripts)
	helm_manager_api_post_onboard_chart() {
	__log_test_start $@

	if [ $# -ne 6 ]; then
	__print_err "<response-code> <repo> <chart> <version> <release> <namespace> " $@
	return 1
	fi

	query="/helm/onboard/chart"
	file="./tmp/chart.json"
	chart_version=$4
	if [ $chart_version == "DEFAULT-VERSION" ]; then
	chart_version="0.1.0"
	fi
	file_data='{"chartId":{"name":"'$3'","version":"'$chart_version'"},"namespace":"'$6'","repository":{"repoName":"'$2'"},"releaseName":"'$5'"}'
	echo $file_data > $file
	echo " FILE - ($file): $file_data" >> $HTTPLOG
	file2="./tmp/override.yaml"
	echo "" >> $file2
	file3="$TESTENV_TEMP_FILES/"$3"-"$chart_version".tgz"
	res="$(__execute_curl_to_helmmanger POST1_2 $query info $file values $file2 chart $file3)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# API Test function: POST /helm/install - install chart
	# args: <response-code> <chart> <version>
	# (Function for test scripts)
	helm_manager_api_post_install_chart() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <chart> <version>" $@
	return 1
	fi

	query="/helm/install"
	file="./tmp/app-installation.json"
	chart_version=$3
	if [ $chart_version == "DEFAULT-VERSION" ]; then
	chart_version="0.1.0"
	fi
	file_data='{"name": "'$2'","version": "'$chart_version'"}'
	echo $file_data > $file
	echo " FILE - ($file): $file_data" >> $HTTPLOG
	res="$(__execute_curl_to_helmmanger POST $query $file)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# API Test function: DELETE /helm/uninstall - uninstall chart
	# args: <response-code> <chart> <version>
	# (Function for test scripts)
	helm_manager_api_uninstall_chart() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <chart> <version> " $@
	return 1
	fi

	chart_version=$3
	if [ $chart_version == "DEFAULT-VERSION" ]; then
	chart_version="0.1.0"
	fi
	query="/helm/uninstall/$2/$chart_version"
	res="$(__execute_curl_to_helmmanger DELETE $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# API Test function: DELETE /helm/chart - delete chart
	# args: <response-code> <chart> <version>
	# (Function for test scripts)
	helm_manager_api_delete_chart() {
	__log_test_start $@

	if [ $# -ne 3 ]; then
	__print_err "<response-code> <chart> <version> " $@
	return 1
	fi

	chart_version=$3
	if [ $chart_version == "DEFAULT-VERSION" ]; then
	chart_version="0.1.0"
	fi
	query="/helm/chart/$2/$chart_version"
	res="$(__execute_curl_to_helmmanger DELETE $query)"
	status=${res:${#res}-3}

	if [ $status -ne $1 ]; then
	__log_test_fail_status_code $1 $status
	return 1
	fi

	__log_test_pass
	return 0
	}

	# Config function: Add repo in helm manager by helm using exec
	# args: <repo-name> <repo-url>
	# (Function for test scripts)
	helm_manager_api_exec_add_repo() {
	__log_conf_start $@

	if [ $# -ne 2 ]; then
	__print_err "<repo-name> <repo-url>" $@
	return 1
	fi

	if [ $RUNMODE == "DOCKER" ]; then
	retmsg=$(docker exec -it $HELM_MANAGER_APP_NAME helm repo add $1 $2)
	retcode=$?
	if [ $retcode -ne 0 ]; then
	__log_conf_fail_general " Cannot add repo to helm, return code: $retcode, msg: $retmsg"
	return 1
	fi
	else
	retmsg=$(kubectl $KUBECONF exec -it $HELM_MANAGER_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE -- helm repo add $1 $2)
	retcode=$?
	if [ $retcode -ne 0 ]; then
	__log_conf_fail_general " Cannot add repo to helm, return code: $retcode, msg: $retmsg"
	return 1
	fi
	fi
	__log_conf_ok
	return 0
	}