| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| #Profile for ORAN Cherry |
| TEST_ENV_PROFILE="ORAN-CHERRY" |
| FLAVOUR="ORAN" |
| |
| ######################################## |
| ## Nexus repo settings |
| ######################################## |
| |
| # Nexus repos for developed images |
| NEXUS_PROXY_REPO="nexus3.o-ran-sc.org:10001/" |
| NEXUS_RELEASE_REPO="nexus3.o-ran-sc.org:10002/" |
| NEXUS_SNAPSHOT_REPO="nexus3.o-ran-sc.org:10003/" |
| NEXUS_STAGING_REPO="nexus3.o-ran-sc.org:10004/" |
| |
| # Nexus repos for images used by test (not developed by the project) |
| NEXUS_RELEASE_REPO_ONAP="nexus3.onap.org:10002/" # Only for released ONAP images |
| NEXUS_RELEASE_REPO_ORAN=$NEXUS_RELEASE_REPO |
| |
| ######################################## |
| # Set up of image and tags for the test. |
| ######################################## |
| |
| # NOTE: One environment variable containing the image name and tag is create by the test script |
| # for each image from the env variables below. |
| # The variable is created by removing the suffix "_BASE" from the base image variable name. |
| # Example: POLICY_AGENT_IMAGE_BASE -> POLICY_AGENT_IMAGE |
| # This var will point to the local or remote image depending on cmd line arguments. |
| # In addition, the repo and the image tag version are selected from the list of image tags based on the cmd line argurment. |
| # For images built by the script, only tag #1 shall be specified |
| # For project images, only tag #1, #2, #3 and #4 shall be specified |
| # For ORAN images (non project), only tag #5 shall be specified |
| # For ONAP images (non project), only tag #6 shall be specified |
| # For all other images, only tag #7 shall be specified |
| # 1 XXX_LOCAL: local images: <image-name>:<local-tag> |
| # 2 XXX_REMOTE_SNAPSHOT: snapshot images: <snapshot-nexus-repo><image-name>:<snapshot-tag> |
| # 3 XXX_REMOTE: staging images: <staging-nexus-repo><image-name>:<staging-tag> |
| # 4 XXX_REMOTE_RELEASE: release images: <release-nexus-repo><image-name>:<release-tag> |
| # 5 XXX_REMOTE_RELEASE_ORAN: ORAN release images: <oran-release-nexus-repo><image-name>:<release-tag> |
| # 6 XXX_REMOTE_RELEASE_ONAP: ONAP release images: <onap-release-nexus-repo><image-name>:<release-tag> |
| # 7 XXX_PROXY: other images, not produced by the project: <proxy-nexus-repo><mage-name>:<proxy-tag> |
| |
| |
| # Policy Agent base image and tags |
| POLICY_AGENT_IMAGE_BASE="o-ran-sc/nonrtric-policy-agent" |
| POLICY_AGENT_IMAGE_TAG_LOCAL="2.1.1-SNAPSHOT" |
| POLICY_AGENT_IMAGE_TAG_REMOTE_SNAPSHOT="2.1.1-SNAPSHOT" |
| POLICY_AGENT_IMAGE_TAG_REMOTE="2.1.1" |
| POLICY_AGENT_IMAGE_TAG_REMOTE_RELEASE="2.1.1" |
| |
| # ECS image and tags |
| ECS_IMAGE_BASE="o-ran-sc/nonrtric-enrichment-coordinator-service" |
| ECS_IMAGE_TAG_LOCAL="1.0.1-SNAPSHOT" |
| ECS_IMAGE_TAG_REMOTE_SNAPSHOT="1.0.1-SNAPSHOT" |
| ECS_IMAGE_TAG_REMOTE="1.0.1" |
| ECS_IMAGE_TAG_REMOTE_RELEASE="1.0.1" |
| |
| |
| # Control Panel image and tags |
| CONTROL_PANEL_IMAGE_BASE="o-ran-sc/nonrtric-controlpanel" |
| CONTROL_PANEL_IMAGE_TAG_LOCAL="2.1.1-SNAPSHOT" |
| CONTROL_PANEL_IMAGE_TAG_REMOTE_SNAPSHOT="2.1.1-SNAPSHOT" |
| CONTROL_PANEL_IMAGE_TAG_REMOTE="2.1.1" |
| CONTROL_PANEL_IMAGE_TAG_REMOTE_RELEASE="2.1.1" |
| |
| |
| # SDNC A1 Controller image and tags |
| SDNC_A1_CONTROLLER_IMAGE_BASE="o-ran-sc/nonrtric-a1-controller" |
| SDNC_A1_CONTROLLER_IMAGE_TAG_LOCAL="2.0.1-SNAPSHOT" |
| SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_SNAPSHOT="2.0.1-SNAPSHOT" |
| SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE="2.0.1" |
| SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_RELEASE="2.0.1" |
| |
| |
| #SDNC DB remote image and tag |
| SDNC_DB_IMAGE_BASE="mysql/mysql-server" |
| SDNC_DB_IMAGE_TAG_REMOTE_PROXY="5.6" |
| #No local image for SSDNC DB, remote image always used |
| |
| |
| # RAPP Catalogue image and tags |
| RAPP_CAT_IMAGE_BASE="o-ran-sc/nonrtric-r-app-catalogue" |
| RAPP_CAT_IMAGE_TAG_LOCAL="1.0.1-SNAPSHOT" |
| RAPP_CAT_IMAGE_TAG_REMOTE_SNAPSHOT="1.0.1-SNAPSHOT" |
| RAPP_CAT_IMAGE_TAG_REMOTE="1.0.1" |
| RAPP_CAT_IMAGE_TAG_REMOTE_RELEASE="1.0.1" |
| |
| |
| # Near RT RIC Simulator image and tags |
| RIC_SIM_IMAGE_BASE="o-ran-sc/a1-simulator" |
| RIC_SIM_IMAGE_TAG_LOCAL="latest" |
| RIC_SIM_IMAGE_TAG_REMOTE_SNAPSHOT="2.1.0-SNAPSHOT" |
| RIC_SIM_IMAGE_TAG_REMOTE="2.1.0" |
| RIC_SIM_IMAGE_TAG_REMOTE_RELEASE="2.1.0" |
| |
| |
| #Consul remote image and tag |
| CONSUL_IMAGE_BASE="consul" |
| CONSUL_IMAGE_TAG_REMOTE_PROXY="1.7.2" |
| #No local image for Consul, remote image always used |
| |
| |
| #CBS remote image and tag |
| CBS_IMAGE_BASE="onap/org.onap.dcaegen2.platform.configbinding.app-app" |
| CBS_IMAGE_TAG_REMOTE_RELEASE_ONAP="2.3.0" |
| #No local image for CBS, remote image always used |
| |
| |
| #MR stub image and tag |
| MRSTUB_IMAGE_BASE="mrstub" |
| MRSTUB_IMAGE_TAG_LOCAL="latest" |
| #No remote image for MR stub, local image always used |
| |
| |
| #Callback receiver image and tag |
| CR_IMAGE_BASE="callback-receiver" |
| CR_IMAGE_TAG_LOCAL="latest" |
| #No remote image for CR, local image always used |
| |
| |
| #Producer stub image and tag |
| PROD_STUB_IMAGE_BASE="producer-stub" |
| PROD_STUB_IMAGE_TAG_LOCAL="latest" |
| #No remote image for producer stub, local image always used |
| |
| #Http proxy remote image and tag |
| HTTP_PROXY_IMAGE_BASE="mitmproxy/mitmproxy" |
| HTTP_PROXY_IMAGE_TAG_REMOTE_PROXY="6.0.2" |
| #No local image for Http proxy, remote image always used |
| |
| #ONAP Zookeeper remote image and tag |
| ONAP_ZOOKEEPER_IMAGE_BASE="onap/dmaap/zookeeper" |
| ONAP_ZOOKEEPER_IMAGE_TAG_REMOTE_RELEASE_ONAP="6.0.3" |
| #No local image for ONAP Zookeeper, remote image always used |
| |
| #ONAP Kafka remote image and tag |
| ONAP_KAFKA_IMAGE_BASE="onap/dmaap/kafka111" |
| ONAP_KAFKA_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.0.4" |
| #No local image for ONAP Kafka, remote image always used |
| |
| #ONAP DMAAP-MR remote image and tag |
| ONAP_DMAAPMR_IMAGE_BASE="onap/dmaap/dmaap-mr" |
| ONAP_DMAAPMR_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.1.18" |
| #No local image for ONAP DMAAP-MR, remote image always used |
| |
| #Kube proxy remote image and tag |
| KUBE_PROXY_IMAGE_BASE="mitmproxy/mitmproxy" |
| KUBE_PROXY_IMAGE_TAG_REMOTE_PROXY="6.0.2" |
| #No local image for http proxy, remote image always used |
| |
| # List of app short names produced by the project |
| PROJECT_IMAGES_APP_NAMES="PA ECS CP SDNC RC RICSIM" |
| |
| # List of app short names which images pulled from ORAN |
| ORAN_IMAGES_APP_NAMES="" # Not used |
| |
| # List of app short names which images pulled from ONAP |
| ONAP_IMAGES_APP_NAMES="CBS DMAAPMR" |
| |
| |
| ######################################## |
| # Detailed settings per app |
| ######################################## |
| |
| DOCKER_SIM_NWNAME="nonrtric-docker-net" # Name of docker private network |
| |
| KUBE_NONRTRIC_NAMESPACE="nonrtric" # Namespace for all nonrtric components |
| KUBE_SIM_NAMESPACE="nonrtric-ft" # Namespace for simulators (except MR and RICSIM) |
| KUBE_ONAP_NAMESPACE="onap" # Namespace for onap (only message router) |
| |
| POLICY_AGENT_EXTERNAL_PORT=8081 # Policy Agent container external port (host -> container) |
| POLICY_AGENT_INTERNAL_PORT=8081 # Policy Agent container internal port (container -> container) |
| POLICY_AGENT_EXTERNAL_SECURE_PORT=8433 # Policy Agent container external secure port (host -> container) |
| POLICY_AGENT_INTERNAL_SECURE_PORT=8433 # Policy Agent container internal secure port (container -> container) |
| POLICY_AGENT_APIS="V1 V2" # Supported northbound api versions |
| PMS_VERSION="V2" # Tested version of northbound API |
| PMS_API_PREFIX="/a1-policy" # api url prefix, only for V2 |
| |
| POLICY_AGENT_APP_NAME="policymanagementservice" # Name for Policy Agent container |
| POLICY_AGENT_DISPLAY_NAME="Policy Management Service" |
| POLICY_AGENT_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host |
| POLICY_AGENT_LOGPATH="/var/log/policy-agent/application.log" # Path the application log in the Policy Agent container |
| POLICY_AGENT_APP_NAME_ALIAS="policy-agent-container" # Alias name, name used by the control panel |
| POLICY_AGENT_CONFIG_KEY="policy-agent" # Key for consul config |
| POLICY_AGENT_PKG_NAME="org.oransc.policyagent" # Java base package name |
| POLICY_AGENT_ACTUATOR="/actuator/loggers/$POLICY_AGENT_PKG_NAME" # Url for trace/debug |
| POLICY_AGENT_ALIVE_URL=$PMS_API_PREFIX"/v2/status" # Base path for alive check |
| POLICY_AGENT_COMPOSE_DIR="policy_agent" # Dir in simulator_group for docker-compose |
| POLICY_AGENT_CONFIG_MOUNT_PATH="/opt/app/policy-agent/config" # Path in container for config file |
| POLICY_AGENT_DATA_MOUNT_PATH="/opt/app/policy-agent/data" # Path in container for data file |
| POLICY_AGENT_CONFIG_FILE="application.yaml" # Container config file name |
| POLICY_AGENT_DATA_FILE="application_configuration.json" # Container data file name |
| |
| ECS_APP_NAME="enrichmentservice" # Name for ECS container |
| ECS_DISPLAY_NAME="Enrichment Coordinator Service" # Display name for ECS container |
| ECS_EXTERNAL_PORT=8083 # ECS container external port (host -> container) |
| ECS_INTERNAL_PORT=8083 # ECS container internal port (container -> container) |
| ECS_EXTERNAL_SECURE_PORT=8434 # ECS container external secure port (host -> container) |
| ECS_INTERNAL_SECURE_PORT=8434 # ECS container internal secure port (container -> container) |
| |
| ECS_LOGPATH="/var/log/enrichment-coordinator-service/application.log" # Path the application log in the ECS container |
| ECS_APP_NAME_ALIAS="enrichment-service-container" # Alias name, name used by the control panel |
| ECS_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host |
| ECS_CONTAINER_MNT_DIR="/var/enrichment-coordinator-service" # Mounted dir in the container |
| ECS_ACTUATOR="/actuator/loggers/org.oransc.enrichment" # Url for trace/debug |
| ECS_CERT_MOUNT_DIR="./cert" |
| ECS_ALIVE_URL="/status" # Base path for alive check |
| ECS_COMPOSE_DIR="ecs" # Dir in simulator_group for docker-compose |
| ECS_CONFIG_MOUNT_PATH=/opt/app/enrichment-coordinator-service/config # Internal container path for configuration |
| ECS_CONFIG_FILE=application.yaml # Config file name |
| ECS_VERSION="V1-2" # Version where the types are added in the producer registration |
| |
| MR_DMAAP_APP_NAME="dmaap-mr" # Name for the Dmaap MR |
| MR_STUB_APP_NAME="mr-stub" # Name of the MR stub |
| MR_DMAAP_DISPLAY_NAME="DMAAP Message Router" |
| MR_STUB_DISPLAY_NAME="Message Router stub" |
| MR_STUB_CERT_MOUNT_DIR="./cert" |
| MR_EXTERNAL_PORT=3904 # MR dmaap/stub container external port |
| MR_INTERNAL_PORT=3904 # MR dmaap/stub container internal port |
| MR_EXTERNAL_SECURE_PORT=3905 # MR dmaap/stub container external secure port |
| MR_INTERNAL_SECURE_PORT=3905 # MR dmaap/stub container internal secure port |
| MR_DMAAP_LOCALHOST_PORT=3904 # MR stub container external port (host -> container) |
| MR_STUB_LOCALHOST_PORT=3908 # MR stub container external port (host -> container) |
| MR_DMAAP_LOCALHOST_SECURE_PORT=3905 # MR stub container internal port (container -> container) |
| MR_STUB_LOCALHOST_SECURE_PORT=3909 # MR stub container external secure port (host -> container) |
| MR_READ_URL="/events/A1-POLICY-AGENT-READ/users/policy-agent?timeout=15000&limit=100" # Path to read messages from MR |
| MR_WRITE_URL="/events/A1-POLICY-AGENT-WRITE" # Path write messages to MR |
| MR_READ_TOPIC="A1-POLICY-AGENT-READ" # Read topic |
| MR_WRITE_TOPIC="A1-POLICY-AGENT-WRITE" # Write topic |
| MR_STUB_ALIVE_URL="/" # Base path for mr stub alive check |
| MR_DMAAP_ALIVE_URL="/topics" # Base path for dmaap-mr alive check |
| MR_DMAAP_COMPOSE_DIR="dmaapmr" # Dir in simulator_group for dmaap mr for - docker-compose |
| MR_STUB_COMPOSE_DIR="mrstub" # Dir in simulator_group for mr stub for - docker-compose |
| MR_KAFKA_APP_NAME="kafka" # Kafka app name |
| MR_ZOOKEEPER_APP_NAME="zookeeper" # Zookeeper app name |
| |
| |
| CR_APP_NAME="callback-receiver" # Name for the Callback receiver |
| CR_DISPLAY_NAME="Callback Reciever" |
| CR_EXTERNAL_PORT=8090 # Callback receiver container external port (host -> container) |
| CR_INTERNAL_PORT=8090 # Callback receiver container internal port (container -> container) |
| CR_EXTERNAL_SECURE_PORT=8091 # Callback receiver container external secure port (host -> container) |
| CR_INTERNAL_SECURE_PORT=8091 # Callback receiver container internal secure port (container -> container) |
| CR_APP_CALLBACK="/callbacks" # Url for callbacks |
| CR_ALIVE_URL="/" # Base path for alive check |
| CR_COMPOSE_DIR="cr" # Dir in simulator_group for docker-compose |
| |
| PROD_STUB_APP_NAME="producer-stub" # Name for the Producer stub |
| PROD_STUB_DISPLAY_NAME="Producer Stub" |
| PROD_STUB_EXTERNAL_PORT=8092 # Producer stub container external port (host -> container) |
| PROD_STUB_INTERNAL_PORT=8092 # Producer stub container internal port (container -> container) |
| PROD_STUB_EXTERNAL_SECURE_PORT=8093 # Producer stub container external secure port (host -> container) |
| PROD_STUB_INTERNAL_SECURE_PORT=8093 # Producer stub container internal secure port (container -> container) |
| PROD_STUB_JOB_CALLBACK="/callbacks/job" # Callback path for job create/update/delete |
| PROD_STUB_SUPERVISION_CALLBACK="/callbacks/supervision" # Callback path for producre supervision |
| PROD_STUB_ALIVE_URL="/" # Base path for alive check |
| PROD_STUB_COMPOSE_DIR="prodstub" # Dir in simulator_group for docker-compose |
| |
| CONSUL_HOST="consul-server" # Host name of consul |
| CONSUL_DISPLAY_NAME="Consul" |
| CONSUL_EXTERNAL_PORT=8500 # Consul container external port (host -> container) |
| CONSUL_INTERNAL_PORT=8500 # Consul container internal port (container -> container) |
| CONSUL_APP_NAME="polman-consul" # Name for consul container |
| CONSUL_ALIVE_URL="/ui/dc1/kv" # Base path for alive check |
| CONSUL_CBS_COMPOSE_DIR="consul_cbs" # Dir in simulator group for docker compose |
| |
| CBS_APP_NAME="polman-cbs" # Name for CBS container |
| CBS_DISPLAY_NAME="Config Binding Service" |
| CBS_EXTERNAL_PORT=10000 # CBS container external port (host -> container) |
| CBS_INTERNAL_PORT=10000 # CBS container internal port (container -> container) |
| CONFIG_BINDING_SERVICE="config-binding-service" # Host name of CBS |
| CBS_ALIVE_URL="/healthcheck" # Base path for alive check |
| |
| RIC_SIM_DISPLAY_NAME="Near-RT RIC A1 Simulator" |
| RIC_SIM_BASE="g" # Base name of the RIC Simulator container, shall be the group code |
| # Note, a prefix is added to each container name by the .env file in the 'ric' dir |
| RIC_SIM_PREFIX="ricsim" # Prefix added to ric container name, added in the .env file in the 'ric' dir |
| # This prefix can be changed from the command line |
| RIC_SIM_INTERNAL_PORT=8085 # RIC Simulator container internal port (container -> container). |
| # (external ports allocated by docker) |
| RIC_SIM_INTERNAL_SECURE_PORT=8185 # RIC Simulator container internal secure port (container -> container). |
| # (external ports allocated by docker) |
| RIC_SIM_CERT_MOUNT_DIR="./cert" |
| |
| RIC_SIM_COMPOSE_DIR="ric" # Dir in simulator group for docker compose |
| RIC_SIM_ALIVE_URL="/" # Base path for alive check |
| |
| SDNC_APP_NAME="a1controller" # Name of the SNDC A1 Controller container |
| SDNC_DISPLAY_NAME="SDNC A1 Controller" |
| SDNC_EXTERNAL_PORT=8282 # SNDC A1 Controller container external port (host -> container) |
| SDNC_INTERNAL_PORT=8181 # SNDC A1 Controller container internal port (container -> container) |
| SDNC_EXTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container external securee port (host -> container) |
| SDNC_INTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container internal secure port (container -> container) |
| SDNC_DB_APP_NAME="sdncdb" # Name of the SDNC DB container |
| SDNC_A1_TRUSTSTORE_PASSWORD="" # SDNC truststore password |
| SDNC_USER="admin" # SDNC username |
| SDNC_PWD="Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" # SNDC PWD |
| SDNC_API_URL="/restconf/operations/A1-ADAPTER-API:" # Base url path for SNDC API |
| SDNC_ALIVE_URL="/apidoc/explorer/" # Base url path for SNDC API docs (for alive check) |
| SDNC_COMPOSE_DIR="sdnc" # Dir in simulator_group for docker-compose |
| SDNC_COMPOSE_FILE="docker-compose.yml" |
| SDNC_KUBE_APP_FILE="app.yaml" |
| SDNC_KARAF_LOG="/opt/opendaylight/data/log/karaf.log" # Path to karaf log |
| SDNC_RESPONSE_JSON_KEY="output" # Key name for output json in replies from sdnc |
| |
| RAPP_CAT_APP_NAME="rappcatalogueservice" # Name for the RAPP Catalogue |
| RAPP_CAT_DISPLAY_NAME="RAPP Catalogue Service" |
| RAPP_CAT_EXTERNAL_PORT=8680 # RAPP Catalogue container external port (host -> container) |
| RAPP_CAT_INTERNAL_PORT=8680 # RAPP Catalogue container internal port (container -> container) |
| RAPP_CAT_EXTERNAL_SECURE_PORT=8633 # RAPP Catalogue container external secure port (host -> container) |
| RAPP_CAT_INTERNAL_SECURE_PORT=8633 # RAPP Catalogue container internal secure port (container -> container) |
| RAPP_CAT_ALIVE_URL="/services" # Base path for alive check |
| RAPP_CAT_COMPOSE_DIR="rapp_catalogue" # Dir in simulator_group for docker-compose |
| |
| CONTROL_PANEL_APP_NAME="controlpanel" # Name of the Control Panel container |
| CONTROL_PANEL_DISPLAY_NAME="Non-RT RIC Control Panel" |
| CONTROL_PANEL_EXTERNAL_PORT=8080 # Control Panel container external port (host -> container) |
| CONTROL_PANEL_INTERNAL_PORT=8080 # Control Panel container internal port (container -> container) |
| CONTROL_PANEL_EXTERNAL_SECURE_PORT=8880 # Control Panel container external port (host -> container) |
| CONTROL_PANEL_INTERNAL_SECURE_PORT=8082 # Control Panel container internal port (container -> container) |
| CONTROL_PANEL_LOGPATH="/logs/nonrtric-controlpanel.log" # Path the application log in the Control Panel container |
| CONTROL_PANEL_ALIVE_URL="/" # Base path for alive check |
| CONTROL_PANEL_COMPOSE_DIR="control_panel" # Dir in simulator_group for docker-compose |
| CONTROL_PANEL_CONFIG_MOUNT_PATH=/maven # Container internal path for config |
| CONTROL_PANEL_CONFIG_FILE=application.properties # Config file name |
| CONTROL_PANEL_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host |
| |
| HTTP_PROXY_APP_NAME="httpproxy" # Name of the Http Proxy container |
| HTTP_PROXY_DISPLAY_NAME="Http Proxy" |
| HTTP_PROXY_EXTERNAL_PORT=8780 # Http Proxy container external port (host -> container) |
| HTTP_PROXY_INTERNAL_PORT=8080 # Http Proxy container internal port (container -> container) |
| HTTP_PROXY_WEB_EXTERNAL_PORT=8781 # Http Proxy container external port (host -> container) |
| HTTP_PROXY_WEB_INTERNAL_PORT=8081 # Http Proxy container internal port (container -> container) |
| HTTP_PROXY_CONFIG_PORT=0 # Port number for proxy config, will be set if proxy is started |
| HTTP_PROXY_CONFIG_HOST_NAME="" # Proxy host, will be set if proxy is started |
| HTTP_PROXY_ALIVE_URL="/" # Base path for alive check |
| HTTP_PROXY_COMPOSE_DIR="httpproxy" # Dir in simulator_group for docker-compose |
| |
| |
| KUBE_PROXY_APP_NAME="kubeproxy" # Name of the Kube Http Proxy container |
| KUBE_PROXY_DISPLAY_NAME="Kube Http Proxy" |
| KUBE_PROXY_EXTERNAL_PORT=8730 # Kube Http Proxy container external port (host -> container) |
| KUBE_PROXY_INTERNAL_PORT=8080 # Kube Http Proxy container internal port (container -> container) |
| KUBE_PROXY_WEB_EXTERNAL_PORT=8731 # Kube Http Proxy container external port (host -> container) |
| KUBE_PROXY_WEB_INTERNAL_PORT=8081 # Kube Http Proxy container internal port (container -> container) |
| KUBE_PROXY_PATH="" # Proxy url path, will be set if proxy is started |
| KUBE_PROXY_ALIVE_URL="/" # Base path for alive check |
| KUBE_PROXY_COMPOSE_DIR="kubeproxy" # Dir in simulator_group for docker-compose |
| |
| ######################################## |
| # Setting for common curl-base function |
| ######################################## |
| |
| UUID="" # UUID used as prefix to the policy id to simulate a real UUID |
| # Testscript need to set the UUID otherwise this empty prefix is used |