| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| |
| # This is a script that contains container/service management functions and test functions for Producer stub |
| |
| |
| ################ Test engine functions ################ |
| |
| # Create the image var used during the test |
| # arg: <image-tag-suffix> (selects staging, snapshot, release etc) |
| # <image-tag-suffix> is present only for images with staging, snapshot,release tags |
| __PRODSTUB_imagesetup() { |
| __check_and_create_image_var PRODSTUB "PROD_STUB_IMAGE" "PROD_STUB_IMAGE_BASE" "PROD_STUB_IMAGE_TAG" LOCAL "$PROD_STUB_DISPLAY_NAME" |
| } |
| |
| # Pull image from remote repo or use locally built image |
| # arg: <pull-policy-override> <pull-policy-original> |
| # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images |
| # <pull-policy-original> Shall be used for images that does not allow overriding |
| # Both var may contain: 'remote', 'remote-remove' or 'local' |
| __PRODSTUB_imagepull() { |
| echo -e $RED"Image for app PRODSTUB shall never be pulled from remote repo"$ERED |
| } |
| |
| # Build image (only for simulator or interfaces stubs owned by the test environment) |
| # arg: <image-tag-suffix> (selects staging, snapshot, release etc) |
| # <image-tag-suffix> is present only for images with staging, snapshot,release tags |
| __PRODSTUB_imagebuild() { |
| cd ../prodstub |
| echo " Building PRODSTUB - $PROD_STUB_DISPLAY_NAME - image: $PROD_STUB_IMAGE" |
| docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $PROD_STUB_IMAGE . &> .dockererr |
| if [ $? -eq 0 ]; then |
| echo -e $GREEN" Build Ok"$EGREEN |
| __retag_and_push_image PROD_STUB_IMAGE |
| if [ $? -ne 0 ]; then |
| exit 1 |
| fi |
| else |
| echo -e $RED" Build Failed"$ERED |
| ((RES_CONF_FAIL++)) |
| cat .dockererr |
| echo -e $RED"Exiting...."$ERED |
| exit 1 |
| fi |
| } |
| |
| # Generate a string for each included image using the app display name and a docker images format string |
| # If a custom image repo is used then also the source image from the local repo is listed |
| # arg: <docker-images-format-string> <file-to-append> |
| __PRODSTUB_image_data() { |
| echo -e "$PROD_STUB_DISPLAY_NAME\t$(docker images --format $1 $PROD_STUB_IMAGE)" >> $2 |
| if [ ! -z "$PROD_STUB_IMAGE_SOURCE" ]; then |
| echo -e "-- source image --\t$(docker images --format $1 $PROD_STUB_IMAGE_SOURCE)" >> $2 |
| fi |
| } |
| |
| # Scale kubernetes resources to zero |
| # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action. |
| # This function is called for apps fully managed by the test script |
| __PRODSTUB_kube_scale_zero() { |
| __kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest PRODSTUB |
| } |
| |
| # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action. |
| # This function is called for prestarted apps not managed by the test script. |
| __PRODSTUB_kube_scale_zero_and_wait() { |
| echo -e $RED" PRODSTUB app is not scaled in this state"$ERED |
| } |
| |
| # Delete all kube resouces for the app |
| # This function is called for apps managed by the test script. |
| __PRODSTUB_kube_delete_all() { |
| __kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest PRODSTUB |
| } |
| |
| # Store docker logs |
| # This function is called for apps managed by the test script. |
| # args: <log-dir> <file-prexix> |
| __PRODSTUB_store_docker_logs() { |
| if [ $RUNMODE == "KUBE" ]; then |
| kubectl $KUBECONF logs -l "autotest=PRODSTUB" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_prodstub.log 2>&1 |
| else |
| docker logs $PROD_STUB_APP_NAME > $1$2_prodstub.log 2>&1 |
| fi |
| } |
| |
| # Initial setup of protocol, host and ports |
| # This function is called for apps managed by the test script. |
| # args: - |
| __PRODSTUB_initial_setup() { |
| use_prod_stub_http |
| } |
| |
| # Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers |
| # For docker, the namespace shall be excluded |
| # This function is called for apps managed by the test script as well as for prestarted apps. |
| # args: - |
| __PRODSTUB_statisics_setup() { |
| if [ $RUNMODE == "KUBE" ]; then |
| echo "PRODSTUB $PROD_STUB_APP_NAME $KUBE_SIM_NAMESPACE" |
| else |
| echo "PRODSTUB $PROD_STUB_APP_NAME" |
| fi |
| } |
| |
| # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied |
| # args: - |
| __PRODSTUB_test_requirements() { |
| : |
| } |
| |
| ####################################################### |
| |
| # Set http as the protocol to use for all communication to the Prod stub sim |
| # args: - |
| # (Function for test scripts) |
| use_prod_stub_http() { |
| __prod_stub_set_protocoll "http" $PROD_STUB_INTERNAL_PORT $PROD_STUB_EXTERNAL_PORT |
| } |
| |
| # Set https as the protocol to use for all communication to the Prod stub sim |
| # args: - |
| # (Function for test scripts) |
| use_prod_stub_https() { |
| __prod_stub_set_protocoll "https" $PROD_STUB_INTERNAL_SECURE_PORT $PROD_STUB_EXTERNAL_SECURE_PORT |
| } |
| |
| # Setup paths to svc/container for internal and external access |
| # args: <protocol> <internal-port> <external-port> |
| __prod_stub_set_protocoll() { |
| echo -e $BOLD"$PROD_STUB_DISPLAY_NAME protocol setting"$EBOLD |
| echo -e " Using $BOLD $1 $EBOLD towards $PROD_STUB_DISPLAY_NAME" |
| |
| ## Access to Prod stub sim |
| |
| PROD_STUB_SERVICE_PATH=$1"://"$PROD_STUB_APP_NAME":"$2 # docker access, container->container and script->container via proxy |
| if [ $RUNMODE == "KUBE" ]; then |
| PROD_STUB_SERVICE_PATH=$1"://"$PROD_STUB_APP_NAME.$KUBE_SIM_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy |
| fi |
| |
| echo "" |
| } |
| |
| ### Admin API functions producer stub |
| |
| ########################### |
| ### Producer stub functions |
| ########################### |
| |
| # Export env vars for config files, docker compose and kube resources |
| # args: |
| __prodstub_export_vars() { |
| export PROD_STUB_APP_NAME |
| export PROD_STUB_DISPLAY_NAME |
| |
| export DOCKER_SIM_NWNAME |
| export KUBE_SIM_NAMESPACE |
| |
| export PROD_STUB_IMAGE |
| export PROD_STUB_INTERNAL_PORT |
| export PROD_STUB_INTERNAL_SECURE_PORT |
| export PROD_STUB_EXTERNAL_PORT |
| export PROD_STUB_EXTERNAL_SECURE_PORT |
| } |
| |
| |
| # Start the Producer stub in the simulator group |
| # args: - |
| # (Function for test scripts) |
| start_prod_stub() { |
| |
| echo -e $BOLD"Starting $PROD_STUB_DISPLAY_NAME"$EBOLD |
| |
| if [ $RUNMODE == "KUBE" ]; then |
| |
| # Check if app shall be fully managed by the test script |
| __check_included_image "PRODSTUB" |
| retcode_i=$? |
| |
| # Check if app shall only be used by the testscipt |
| __check_prestarted_image "PRODSTUB" |
| retcode_p=$? |
| |
| if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then |
| echo -e $RED"The $PROD_STUB_APP_NAME app is not included as managed nor prestarted in this test script"$ERED |
| echo -e $RED"The $PROD_STUB_APP_NAME will not be started"$ERED |
| exit |
| fi |
| if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then |
| echo -e $RED"The $PROD_STUB_APP_NAME app is included both as managed and prestarted in this test script"$ERED |
| echo -e $RED"The $PROD_STUB_APP_NAME will not be started"$ERED |
| exit |
| fi |
| |
| if [ $retcode_p -eq 0 ]; then |
| echo -e " Using existing $PROD_STUB_APP_NAME deployment and service" |
| echo " Setting RC replicas=1" |
| __kube_scale deployment $PROD_STUB_APP_NAME $KUBE_SIM_NAMESPACE 1 |
| fi |
| |
| if [ $retcode_i -eq 0 ]; then |
| echo -e " Creating $PROD_STUB_APP_NAME deployment and service" |
| |
| __kube_create_namespace $KUBE_SIM_NAMESPACE |
| |
| __prodstub_export_vars |
| |
| # Create service |
| input_yaml=$SIM_GROUP"/"$PROD_STUB_COMPOSE_DIR"/"svc.yaml |
| output_yaml=$PWD/tmp/prodstub_svc.yaml |
| __kube_create_instance service $PROD_STUB_APP_NAME $input_yaml $output_yaml |
| |
| # Create app |
| input_yaml=$SIM_GROUP"/"$PROD_STUB_COMPOSE_DIR"/"app.yaml |
| output_yaml=$PWD/tmp/prodstub_app.yaml |
| __kube_create_instance app $PROD_STUB_APP_NAME $input_yaml $output_yaml |
| fi |
| |
| __check_service_start $PROD_STUB_APP_NAME $PROD_STUB_SERVICE_PATH$PROD_STUB_ALIVE_URL |
| |
| echo -ne " Service $PROD_STUB_APP_NAME - reset "$SAMELINE |
| result=$(__do_curl $PROD_STUB_SERVICE_PATH/reset) |
| if [ $? -ne 0 ]; then |
| echo -e " Service $PROD_STUB_APP_NAME - reset $RED Failed $ERED - will continue" |
| else |
| echo -e " Service $PROD_STUB_APP_NAME - reset $GREEN OK $EGREEN" |
| fi |
| else |
| |
| # Check if docker app shall be fully managed by the test script |
| __check_included_image 'PRODSTUB' |
| if [ $? -eq 1 ]; then |
| echo -e $RED"The Producer stub app is not included as managed in this test script"$ERED |
| echo -e $RED"The Producer stub will not be started"$ERED |
| exit |
| fi |
| |
| __prodstub_export_vars |
| |
| __start_container $PROD_STUB_COMPOSE_DIR "" NODOCKERARGS 1 $PROD_STUB_APP_NAME |
| |
| __check_service_start $PROD_STUB_APP_NAME $PROD_STUB_SERVICE_PATH$PROD_STUB_ALIVE_URL |
| fi |
| echo "" |
| return 0 |
| } |
| |
| # Excute a curl cmd towards the prodstub simulator and check the response code. |
| # args: TEST|CONF <expected-response-code> <curl-cmd-string> [<json-file-to-compare-output>] |
| __execute_curl_to_prodstub() { |
| TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S") |
| echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| proxyflag="" |
| if [ ! -z "$KUBE_PROXY_PATH" ]; then |
| if [ $KUBE_PROXY_HTTPX == "http" ]; then |
| proxyflag=" --proxy $KUBE_PROXY_PATH" |
| else |
| proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH" |
| fi |
| fi |
| if [ ! -z "$KUBE_PROXY_CURL_JWT" ]; then |
| jwt="-H "\""Authorization: Bearer $KUBE_PROXY_CURL_JWT"\" |
| echo " CMD: $3 $proxyflag $jwt" >> $HTTPLOG |
| res=$($3 $proxyflag -H "Authorization: Bearer $KUBE_PROXY_CURL_JWT") |
| else |
| echo " CMD: $3 $proxyflag" >> $HTTPLOG |
| res="$($3 $proxyflag)" |
| fi |
| echo " RESP: $res" >> $HTTPLOG |
| retcode=$? |
| if [ $retcode -ne 0 ]; then |
| __log_conf_fail_general " Fatal error when executing curl, response: "$retcode |
| return 1 |
| fi |
| status=${res:${#res}-3} |
| if [ $status -eq $2 ]; then |
| if [ $# -eq 4 ]; then |
| body=${res:0:${#res}-3} |
| jobfile=$(cat $4) |
| echo " TARGET JSON: $jobfile" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$jobfile" "$body") |
| if [ $res -ne 0 ]; then |
| if [ $1 == "TEST" ]; then |
| __log_test_fail_body |
| else |
| __log_conf_fail_body |
| fi |
| return 1 |
| fi |
| fi |
| if [ $1 == "TEST" ]; then |
| __log_test_pass |
| else |
| __log_conf_ok |
| fi |
| return 0 |
| fi |
| if [ $1 == "TEST" ]; then |
| __log_test_fail_status_code $2 $status |
| else |
| __log_conf_fail_status_code $2 $status |
| fi |
| return 1 |
| } |
| |
| # Prodstub API: Set (or reset) response code for producer supervision |
| # <response-code> <producer-id> [<forced_response_code>] |
| # (Function for test scripts) |
| prodstub_arm_producer() { |
| __log_conf_start $@ |
| if [ $# -ne 2 ] && [ $# -ne 3 ]; then |
| __print_err "<response-code> <producer-id> [<forced_response_code>]" $@ |
| return 1 |
| fi |
| |
| curlString="curl -X PUT -skw %{http_code} $PROD_STUB_SERVICE_PATH/arm/supervision/"$2 |
| if [ $# -eq 3 ]; then |
| curlString=$curlString"?response="$3 |
| fi |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Prodstub API: Set (or reset) response code job create |
| # <response-code> <producer-id> <job-id> [<forced_response_code>] |
| # (Function for test scripts) |
| prodstub_arm_job_create() { |
| __log_conf_start $@ |
| if [ $# -ne 3 ] && [ $# -ne 4 ]; then |
| __print_err "<response-code> <producer-id> <job-id> [<forced_response_code>]" $@ |
| return 1 |
| fi |
| |
| curlString="curl -X PUT -skw %{http_code} $PROD_STUB_SERVICE_PATH/arm/create/$2/$3" |
| if [ $# -eq 4 ]; then |
| curlString=$curlString"?response="$4 |
| fi |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Prodstub API: Set (or reset) response code job delete |
| # <response-code> <producer-id> <job-id> [<forced_response_code>] |
| # (Function for test scripts) |
| prodstub_arm_job_delete() { |
| __log_conf_start $@ |
| if [ $# -ne 3 ] && [ $# -ne 4 ]; then |
| __print_err "<response-code> <producer-id> <job-id> [<forced_response_code>]" $@ |
| return 1 |
| fi |
| |
| curlString="curl -X PUT -skw %{http_code} $PROD_STUB_SERVICE_PATH/arm/delete/$2/$3" |
| if [ $# -eq 4 ]; then |
| curlString=$curlString"?response="$4 |
| fi |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Prodstub API: Arm a type of a producer |
| # <response-code> <producer-id> <type-id> |
| # (Function for test scripts) |
| prodstub_arm_type() { |
| __log_conf_start $@ |
| if [ $# -ne 3 ]; then |
| __print_err "<response-code> <producer-id> <type-id>" $@ |
| return 1 |
| fi |
| |
| curlString="curl -X PUT -skw %{http_code} $PROD_STUB_SERVICE_PATH/arm/type/$2/$3" |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Prodstub API: Disarm a type in a producer |
| # <response-code> <producer-id> <type-id> |
| # (Function for test scripts) |
| prodstub_disarm_type() { |
| __log_conf_start $@ |
| if [ $# -ne 3 ]; then |
| __print_err "<response-code> <producer-id> <type-id>" $@ |
| return 1 |
| fi |
| |
| curlString="curl -X DELETE -skw %{http_code} $PROD_STUB_SERVICE_PATH/arm/type/$2/$3" |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Prodstub API: Get job data for a job and compare with a target job json |
| # <response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file> |
| # (Function for test scripts) |
| prodstub_check_jobdata() { |
| __log_test_start $@ |
| if [ $# -ne 7 ]; then |
| __print_err "<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>" $@ |
| return 1 |
| fi |
| if [ -f $7 ]; then |
| jobfile=$(cat $7) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g") |
| else |
| __log_test_fail_general "Template file "$7" for jobdata, does not exist" |
| return 1 |
| fi |
| targetJson="{\"ei_job_identity\":\"$3\",\"ei_type_identity\":\"$4\",\"target_uri\":\"$5\",\"owner\":\"$6\", \"ei_job_data\":$jobfile}" |
| file="./tmp/.p.json" |
| echo "$targetJson" > $file |
| |
| curlString="curl -X GET -skw %{http_code} $PROD_STUB_SERVICE_PATH/jobdata/$2/$3" |
| |
| __execute_curl_to_prodstub TEST $1 "$curlString" $file |
| return $? |
| } |
| |
| # Prodstub API: Get job data for a job and compare with a target job json |
| # <response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file> |
| # (Function for test scripts) |
| prodstub_check_jobdata_2() { |
| __log_test_start $@ |
| if [ $# -ne 7 ]; then |
| __print_err "<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>" $@ |
| return 1 |
| fi |
| if [ -f $7 ]; then |
| jobfile=$(cat $7) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g") |
| else |
| __log_test_fail_general "Template file "$7" for jobdata, does not exist" |
| return 1 |
| fi |
| if [[ "$ICS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then |
| targetJson="{\"info_job_identity\":\"$3\",\"info_type_identity\":\"$4\",\"target_uri\":\"$5\",\"owner\":\"$6\", \"info_job_data\":$jobfile,\"last_updated\":\"????\"}" |
| else |
| targetJson="{\"ei_job_identity\":\"$3\",\"ei_type_identity\":\"$4\",\"target_uri\":\"$5\",\"owner\":\"$6\", \"ei_job_data\":$jobfile,\"last_updated\":\"????\"}" |
| fi |
| file="./tmp/.p.json" |
| echo "$targetJson" > $file |
| |
| curlString="curl -X GET -skw %{http_code} $PROD_STUB_SERVICE_PATH/jobdata/$2/$3" |
| |
| __execute_curl_to_prodstub TEST $1 "$curlString" $file |
| return $? |
| } |
| |
| # Prodstub API: Get job data for a job and compare with a target job json (info-jobs) |
| # <response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file> |
| # (Function for test scripts) |
| prodstub_check_jobdata_3() { |
| __log_test_start $@ |
| if [ $# -ne 7 ]; then |
| __print_err "<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>" $@ |
| return 1 |
| fi |
| if [ -f $7 ]; then |
| jobfile=$(cat $7) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g") |
| else |
| __log_test_fail_general "Template file "$7" for jobdata, does not exist" |
| return 1 |
| fi |
| targetJson="{\"info_job_identity\":\"$3\",\"info_type_identity\":\"$4\",\"target_uri\":\"$5\",\"owner\":\"$6\", \"info_job_data\":$jobfile,\"last_updated\":\"????\"}" |
| file="./tmp/.p.json" |
| echo "$targetJson" > $file |
| |
| curlString="curl -X GET -skw %{http_code} $PROD_STUB_SERVICE_PATH/jobdata/$2/$3" |
| |
| __execute_curl_to_prodstub TEST $1 "$curlString" $file |
| return $? |
| } |
| |
| # Prodstub API: Delete the job data |
| # <response-code> <producer-id> <job-id> |
| # (Function for test scripts) |
| prodstub_delete_jobdata() { |
| __log_conf_start |
| if [ $# -ne 3 ]; then |
| __print_err "<response-code> <producer-id> <job-id> " $@ |
| return 1 |
| fi |
| curlString="curl -X DELETE -skw %{http_code} $PROD_STUB_SERVICE_PATH/jobdata/$2/$3" |
| |
| __execute_curl_to_prodstub CONF $1 "$curlString" |
| return $? |
| } |
| |
| # Tests if a variable value in the prod stub is equal to a target value and and optional timeout. |
| # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is |
| # equal to the target or not. |
| # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds |
| # before setting pass or fail depending on if the variable value becomes equal to the target |
| # value or not. |
| # (Function for test scripts) |
| prodstub_equal() { |
| if [ $# -eq 2 ] || [ $# -eq 3 ]; then |
| __var_test "PRODSTUB" "$PROD_STUB_SERVICE_PATH/counter/" $1 "=" $2 $3 |
| else |
| __print_err "Wrong args to prodstub_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@ |
| fi |
| } |