Dockerfile - oransc/o-du/phy - Gitiles

 ################################################################################
 #   Copyright (c) 2019 AT&T Intellectual Property.                             #
 #                                                                              #
 #   Licensed under the Apache License, Version 2.0 (the "License");            #
 #   you may not use this file except in compliance with the License.           #
 #   You may obtain a copy of the License at                                    #
 #                                                                              #
 #       http://www.apache.org/licenses/LICENSE-2.0                             #
 #                                                                              #
 #   Unless required by applicable law or agreed to in writing, software        #
 #   distributed under the License is distributed on an "AS IS" BASIS,          #
 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
 #   See the License for the specific language governing permissions and        #
 #   limitations under the License.                                             #
 ################################################################################
 FROM centos:centos7.7.1908 AS builder

 ENV https_proxy $https_proxy
 ENV http_proxy $http_proxy
 ENV no_proxy $no_proxy

 ARG icc_license_file

 WORKDIR /opt/o-du/phy
 ENV BUILD_DIR /opt/o-du/phy
 ENV XRAN_DIR $BUILD_DIR/fhi_lib

 ###Install required libs
 RUN yum install -y libhugetlbfs-utils libhugetlbfs-devel libhugetlbfs numactl-devel ethtool gcc make module-init-tools kmod patch xz iproute pciutils python vim cmake unzip nano mc iputils-ping libaio libaio-devel net-tools  wget zip

 ###Install some libs to compile DPDK
 RUN yum groupinstall -y "Development Tools"
 RUN yum install -y  ncurses-devel hmaccalc zlib-devel binutils-devel elfutils-libelf-devel bc libstdc++-4.8.5-28.el7_5.1.x86_64 gcc-c++ libstdc++-devel-4.8.5-28.el7_5.1.x86_64 autoconf-2.69-11.el7.noarch

 ###googletest is required for XRAN unittests build and run
 RUN wget https://github.com/google/googletest/archive/release-1.7.0.tar.gz && \
     cd /opt && tar -zxvf $BUILD_DIR/release-1.7.0.tar.gz
 ENV GTEST_ROOT /opt/googletest-release-1.7.0
 ENV GTEST_DIR /opt/googletest-release-1.7.0
 RUN cd $GTEST_DIR && \
     g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} -pthread -c ${GTEST_DIR}/src/gtest-all.cc && \
     ar -rv libgtest.a gtest-all.o && cd build-aux/ && cmake $GTEST_DIR && make && cd .. && ln -s build-aux/libgtest_main.a libgtest_main.a

 ###Before install ISS, please go to Intel site to get a free license: https://software.intel.com/en-us/system-studio/choose-download
 COPY $icc_license_file $BUILD_DIR/license.lic

 ####Download Intel System Studio from Intel website and install ICC
 RUN wget https://registrationcenter-download.intel.com/akdlm/IRC_NAS/16789/system_studio_2020_u2_ultimate_edition_offline.tar.gz && \
     cd /opt && mkdir intel && cp $BUILD_DIR/license.lic intel/license.lic && \
     tar -zxvf $BUILD_DIR/system_studio_2020_u2_ultimate_edition_offline.tar.gz && \
     cd system_studio_2020_u2_ultimate_edition_offline/ && \
     sed -i "s/ACCEPT_EULA.*/ACCEPT_EULA=accept/" silent.cfg && \
     sed -i "s/PSET_INSTALL_DIR.*/PSET_INSTALL_DIR=\/opt\/intel/" silent.cfg && \
     sed -i "s/.*ACTIVATION_LICENSE_FILE.*/ACTIVATION_LICENSE_FILE=\/opt\/intel\/license.lic/" silent.cfg && \
     sed -i "s/ACTIVATION_TYPE.*/ACTIVATION_TYPE=license_file/" silent.cfg && \
     ./install.sh -s silent.cfg

 ###Set env for ICC
 RUN source /opt/intel/system_studio_2020/bin/iccvars.sh intel64
 ENV PATH /opt/intel/system_studio_2020/bin/:$PATH

 ####Download and build DPDK
 ENV RTE_TARGET x86_64-native-linuxapp-icc
 ENV RTE_SDK /opt/o-du/dpdk-19.11
 RUN wget http://fast.dpdk.org/rel/dpdk-19.11.tar.xz && \
     tar -xf dpdk-19.11.tar.xz && \
     mv dpdk-19.11 $RTE_SDK && \
     cd $RTE_SDK && \
     make config T=$RTE_TARGET O=$RTE_TARGET && \
     cd $RTE_SDK/$RTE_TARGET && \
     sed -i "s/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/"  .config && \
     sed -i "s/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/"  .config && \
     make

 ####Install octave. Issue when downloading octave. And the octave will take 500MB space.
 RUN yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y && \
     yum install octave -y
 ####Install expect
 RUN yum install -y expect

 ###Copy XRAN source code into docker image
 COPY fhi_lib $BUILD_DIR/fhi_lib
 COPY misc $BUILD_DIR/misc

 ENV WIRELESS_SDK_TARGET_ISA avx512

 ####Download and Build FlexRAN FEC SDK, not needed for run L1
 #RUN cd $BUILD_DIR/ && wget https://software.intel.com/sites/default/files/managed/23/b8/FlexRAN-FEC-SDK-19-04.tar.gz && tar -zxvf #FlexRAN-FEC-SDK-19-04.tar.gz && misc/extract-flexran-fec-sdk.ex && cd FlexRAN-FEC-SDK-19-04/sdk && source #/opt/intel/system_studio_2019/bin/iccvars.sh intel64 && ./create-makefiles-linux.sh && cd build-avx512-icc && #make && make install

 ####Build XRAN lib, unittests, sample app
 RUN cd $BUILD_DIR/fhi_lib/ && export XRAN_LIB_SO=1 && ./build.sh xclean && ./build.sh && cd app && octave gen_test.m

 ####Build wls lib
 COPY wls_lib $BUILD_DIR/wls_lib
 RUN cd $BUILD_DIR/wls_lib && ./build.sh xclean && ./build.sh
 ENV DIR_WIRELESS_WLS $BUILD_DIR/wls_lib

 ####Clone FlexRAN repo from Github
 RUN cd /opt/o-du && git clone https://github.com/intel/FlexRAN.git
 ENV DIR_WIRELESS=/opt/o-du/FlexRAN/l1/

 ####Build 5g fapi
 COPY fapi_5g $BUILD_DIR/fapi_5g
 ENV DIR_WIRELESS_ORAN_5G_FAPI $BUILD_DIR/fapi_5g
 ENV DEBUG_MODE true
 RUN cd $BUILD_DIR/fapi_5g/build && ./build.sh xclean && ./build.sh

 ####Copy other folders/files
 COPY setupenv.sh $BUILD_DIR

 ####Unset network proxy
 RUN unset http_proxy https_prox ftp_proxy no_proxy

 ####Copy built binaries/libraries into docker images
 FROM centos:centos7.7.1908
 ENV TARGET_DIR /opt/o-du/
 COPY --from=builder $TARGET_DIR/phy $TARGET_DIR/phy
 COPY --from=builder $TARGET_DIR/FlexRAN $TARGET_DIR/FlexRAN

 ###Install required libs
 RUN yum install -y libhugetlbfs-utils libhugetlbfs-devel libhugetlbfs numactl-devel ethtool gcc make module-init-tools kmod patch xz iproute pciutils python vim cmake unzip nano mc iputils-ping libaio libaio-devel net-tools  wget zip

 ###Install some libs to compile DPDK
 RUN yum groupinstall -y "Development Tools"
 RUN yum install -y  ncurses-devel hmaccalc zlib-devel binutils-devel elfutils-libelf-devel bc libstdc++-4.8.5-28.el7_5.1.x86_64 gcc-c++ libstdc++-devel-4.8.5-28.el7_5.1.x86_64 autoconf-2.69-11.el7.noarch

 ###googletest is required for XRAN unittests build and run
 RUN wget https://github.com/google/googletest/archive/release-1.7.0.tar.gz && \
     cd /opt && tar -zxvf $BUILD_DIR/release-1.7.0.tar.gz
 ENV GTEST_ROOT /opt/googletest-release-1.7.0
 ENV GTEST_DIR /opt/googletest-release-1.7.0
 RUN cd $GTEST_DIR && \
     g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} -pthread -c ${GTEST_DIR}/src/gtest-all.cc && \
     ar -rv libgtest.a gtest-all.o && cd build-aux/ && cmake $GTEST_DIR && make && cd .. && ln -s build-aux/libgtest_main.a libgtest_main.a

 RUN yum install -y expect

 WORKDIR $TARGET_DIR

 LABEL description="ORAN O-DU PHY Applications"
	################################################################################
	# Copyright (c) 2019 AT&T Intellectual Property. #
	# #
	# Licensed under the Apache License, Version 2.0 (the "License"); #
	# you may not use this file except in compliance with the License. #
	# You may obtain a copy of the License at #
	# #
	# http://www.apache.org/licenses/LICENSE-2.0 #
	# #
	# Unless required by applicable law or agreed to in writing, software #
	# distributed under the License is distributed on an "AS IS" BASIS, #
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
	# See the License for the specific language governing permissions and #
	# limitations under the License. #
	################################################################################
	FROM centos:centos7.7.1908 AS builder

	ENV https_proxy $https_proxy
	ENV http_proxy $http_proxy
	ENV no_proxy $no_proxy

	ARG icc_license_file

	WORKDIR /opt/o-du/phy
	ENV BUILD_DIR /opt/o-du/phy
	ENV XRAN_DIR $BUILD_DIR/fhi_lib

	###Install required libs
	RUN yum install -y libhugetlbfs-utils libhugetlbfs-devel libhugetlbfs numactl-devel ethtool gcc make module-init-tools kmod patch xz iproute pciutils python vim cmake unzip nano mc iputils-ping libaio libaio-devel net-tools wget zip

	###Install some libs to compile DPDK
	RUN yum groupinstall -y "Development Tools"
	RUN yum install -y ncurses-devel hmaccalc zlib-devel binutils-devel elfutils-libelf-devel bc libstdc++-4.8.5-28.el7_5.1.x86_64 gcc-c++ libstdc++-devel-4.8.5-28.el7_5.1.x86_64 autoconf-2.69-11.el7.noarch

	###googletest is required for XRAN unittests build and run
	RUN wget https://github.com/google/googletest/archive/release-1.7.0.tar.gz && \
	cd /opt && tar -zxvf $BUILD_DIR/release-1.7.0.tar.gz
	ENV GTEST_ROOT /opt/googletest-release-1.7.0
	ENV GTEST_DIR /opt/googletest-release-1.7.0
	RUN cd $GTEST_DIR && \
	g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} -pthread -c ${GTEST_DIR}/src/gtest-all.cc && \
	ar -rv libgtest.a gtest-all.o && cd build-aux/ && cmake $GTEST_DIR && make && cd .. && ln -s build-aux/libgtest_main.a libgtest_main.a

	###Before install ISS, please go to Intel site to get a free license: https://software.intel.com/en-us/system-studio/choose-download
	COPY $icc_license_file $BUILD_DIR/license.lic

	####Download Intel System Studio from Intel website and install ICC
	RUN wget https://registrationcenter-download.intel.com/akdlm/IRC_NAS/16789/system_studio_2020_u2_ultimate_edition_offline.tar.gz && \
	cd /opt && mkdir intel && cp $BUILD_DIR/license.lic intel/license.lic && \
	tar -zxvf $BUILD_DIR/system_studio_2020_u2_ultimate_edition_offline.tar.gz && \
	cd system_studio_2020_u2_ultimate_edition_offline/ && \
	sed -i "s/ACCEPT_EULA.*/ACCEPT_EULA=accept/" silent.cfg && \
	sed -i "s/PSET_INSTALL_DIR.*/PSET_INSTALL_DIR=\/opt\/intel/" silent.cfg && \
	sed -i "s/.ACTIVATION_LICENSE_FILE./ACTIVATION_LICENSE_FILE=\/opt\/intel\/license.lic/" silent.cfg && \
	sed -i "s/ACTIVATION_TYPE.*/ACTIVATION_TYPE=license_file/" silent.cfg && \
	./install.sh -s silent.cfg

	###Set env for ICC
	RUN source /opt/intel/system_studio_2020/bin/iccvars.sh intel64
	ENV PATH /opt/intel/system_studio_2020/bin/:$PATH

	####Download and build DPDK
	ENV RTE_TARGET x86_64-native-linuxapp-icc
	ENV RTE_SDK /opt/o-du/dpdk-19.11
	RUN wget http://fast.dpdk.org/rel/dpdk-19.11.tar.xz && \
	tar -xf dpdk-19.11.tar.xz && \
	mv dpdk-19.11 $RTE_SDK && \
	cd $RTE_SDK && \
	make config T=$RTE_TARGET O=$RTE_TARGET && \
	cd $RTE_SDK/$RTE_TARGET && \
	sed -i "s/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/" .config && \
	sed -i "s/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/" .config && \
	make

	####Install octave. Issue when downloading octave. And the octave will take 500MB space.
	RUN yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y && \
	yum install octave -y
	####Install expect
	RUN yum install -y expect

	###Copy XRAN source code into docker image
	COPY fhi_lib $BUILD_DIR/fhi_lib
	COPY misc $BUILD_DIR/misc

	ENV WIRELESS_SDK_TARGET_ISA avx512

	####Download and Build FlexRAN FEC SDK, not needed for run L1
	#RUN cd $BUILD_DIR/ && wget https://software.intel.com/sites/default/files/managed/23/b8/FlexRAN-FEC-SDK-19-04.tar.gz && tar -zxvf #FlexRAN-FEC-SDK-19-04.tar.gz && misc/extract-flexran-fec-sdk.ex && cd FlexRAN-FEC-SDK-19-04/sdk && source #/opt/intel/system_studio_2019/bin/iccvars.sh intel64 && ./create-makefiles-linux.sh && cd build-avx512-icc && #make && make install

	####Build XRAN lib, unittests, sample app
	RUN cd $BUILD_DIR/fhi_lib/ && export XRAN_LIB_SO=1 && ./build.sh xclean && ./build.sh && cd app && octave gen_test.m

	####Build wls lib
	COPY wls_lib $BUILD_DIR/wls_lib
	RUN cd $BUILD_DIR/wls_lib && ./build.sh xclean && ./build.sh
	ENV DIR_WIRELESS_WLS $BUILD_DIR/wls_lib

	####Clone FlexRAN repo from Github
	RUN cd /opt/o-du && git clone https://github.com/intel/FlexRAN.git
	ENV DIR_WIRELESS=/opt/o-du/FlexRAN/l1/

	####Build 5g fapi
	COPY fapi_5g $BUILD_DIR/fapi_5g
	ENV DIR_WIRELESS_ORAN_5G_FAPI $BUILD_DIR/fapi_5g
	ENV DEBUG_MODE true
	RUN cd $BUILD_DIR/fapi_5g/build && ./build.sh xclean && ./build.sh

	####Copy other folders/files
	COPY setupenv.sh $BUILD_DIR

	####Unset network proxy
	RUN unset http_proxy https_prox ftp_proxy no_proxy

	####Copy built binaries/libraries into docker images
	FROM centos:centos7.7.1908
	ENV TARGET_DIR /opt/o-du/
	COPY --from=builder $TARGET_DIR/phy $TARGET_DIR/phy
	COPY --from=builder $TARGET_DIR/FlexRAN $TARGET_DIR/FlexRAN

	###Install required libs
	RUN yum install -y libhugetlbfs-utils libhugetlbfs-devel libhugetlbfs numactl-devel ethtool gcc make module-init-tools kmod patch xz iproute pciutils python vim cmake unzip nano mc iputils-ping libaio libaio-devel net-tools wget zip

	###Install some libs to compile DPDK
	RUN yum groupinstall -y "Development Tools"
	RUN yum install -y ncurses-devel hmaccalc zlib-devel binutils-devel elfutils-libelf-devel bc libstdc++-4.8.5-28.el7_5.1.x86_64 gcc-c++ libstdc++-devel-4.8.5-28.el7_5.1.x86_64 autoconf-2.69-11.el7.noarch

	###googletest is required for XRAN unittests build and run
	RUN wget https://github.com/google/googletest/archive/release-1.7.0.tar.gz && \
	cd /opt && tar -zxvf $BUILD_DIR/release-1.7.0.tar.gz
	ENV GTEST_ROOT /opt/googletest-release-1.7.0
	ENV GTEST_DIR /opt/googletest-release-1.7.0
	RUN cd $GTEST_DIR && \
	g++ -isystem ${GTEST_DIR}/include -I${GTEST_DIR} -pthread -c ${GTEST_DIR}/src/gtest-all.cc && \
	ar -rv libgtest.a gtest-all.o && cd build-aux/ && cmake $GTEST_DIR && make && cd .. && ln -s build-aux/libgtest_main.a libgtest_main.a

	RUN yum install -y expect

	WORKDIR $TARGET_DIR

	LABEL description="ORAN O-DU PHY Applications"