RIC-E2-TERMINATION/Dockerfile

##############################################################################
#
#   Copyright (c) 2019 AT&T Intellectual Property.
#
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.
#
##############################################################################

#
#   This source code is part of the near-RT RIC (RAN Intelligent Controller)
#   platform project (RICP).
#
FROM nexus3.o-ran-sc.org:10004/bldr-ubuntu18-c-go:5-u18.04-nng as ubuntu
#FROM nexus3.o-ran-sc.org:10004/bldr-ubuntu16-c-go:3-u16.04-nng as ubuntu

WORKDIR /opt/e2/

ARG BUILD_TYPE="Release"

RUN mkdir -p /opt/e2/RIC-E2-TERMINATION/ \
    && mkdir -p /opt/e2/RIC-E2-TERMINATION/TEST/T1 \
    && mkdir -p /opt/e2/RIC-E2-TERMINATION/TEST/T2 \
    && mkdir -p /opt/e2/RIC-E2-TERMINATION/3rdparty

COPY . /opt/e2/RIC-E2-TERMINATION/
RUN mv /opt/e2/RIC-E2-TERMINATION/CMakeLists.txt /opt/e2/

RUN cat /opt/e2/RIC-E2-TERMINATION/config/config.conf

RUN wget --content-disposition https://github.com/cgreen-devs/cgreen/releases/download/1.2.0/cgreen_1.2.0_amd64.deb \
        && dpkg -i cgreen_1.2.0_amd64.deb \
         && wget --content-disposition https://packagecloud.io/o-ran-sc/staging/packages/debian/stretch/rmr_3.6.2_amd64.deb/download.deb \
         && dpkg -i rmr_3.6.2_amd64.deb \
         && wget --content-disposition https://packagecloud.io/o-ran-sc/staging/packages/debian/stretch/rmr-dev_3.6.2_amd64.deb/download.deb \
         && dpkg -i rmr-dev_3.6.2_amd64.deb

RUN apt-get install -y libcurl4-gnutls-dev gawk  \
    && cd /opt/e2/RIC-E2-TERMINATION/3rdparty && git clone https://github.com/oktal/pistache.git && cd pistache \
    && git submodule update --init && mkdir build && cd build \
    && cmake -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Release -DPISTACHE_BUILD_DOCS=false \
       -DPISTACHE_USE_SSL=false -DPISTACHE_BUILD_TESTS=false -DCMAKE_INSTALL_PREFIX=/usr/local ../ \
    && make -j && make install && ldconfig \
    && git clone http://gerrit.o-ran-sc.org/r/com/log \
    && cd log && ./autogen.sh && ./configure && make && make install && ldconfig \
    && cd /opt/e2/RIC-E2-TERMINATION/3rdparty && git clone https://github.com/jarro2783/cxxopts.git \
    && cd cxxopts && mkdir build && cd build && cmake .. && make install && ldconfig \
    && cd /opt/e2/RIC-E2-TERMINATION/3rdparty && git clone https://github.com/Tencent/rapidjson.git \
    && cd rapidjson && mkdir build && cd build && cmake .. && make install && ldconfig \
    && cd /opt/e2/RIC-E2-TERMINATION/3rdparty \
    && cd /opt/e2/ && git clone https://github.com/bilke/cmake-modules.git \
    && cd /opt/e2/ && /usr/local/bin/cmake -D CMAKE_BUILD_TYPE=$BUILD_TYPE . && make \
    && echo "3" > /opt/e2/rmr.verbose



RUN if [$BUILD_TYPE == "Debug"] ; then make e2_coverage ; fi

#    && git clone http://gerrit.o-ran-sc.org/r/ric-plt/tracelibcpp \
#    && cd tracelibcpp && mkdir build && cd build  \
#    &&  sed -i '19iset\(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O3"\)' ../CMakeLists.txt \
#    &&  sed -i '19iset\(CMAKE_CXX_STANDARD 17\)' ../CMakeLists.txt\
#    && /usr/local/bin/cmake .. && make && cd .. && cp include/tracelibcpp/tracelibcpp.hpp . && cd .. \
#    && mkdir nlohmann && cd nlohmann && find / -type f -name "json.hpp" -exec cp {} json.hpp \; && cd .. \
#    && find / -type d -name "opentracing" -exec cp -r {} . \; \
#    && cd /usr/local/lib/ && find / -type f -name "libyaml-cpp.a" -exec cp {} libyaml-cpp.a \; \
#    && find / -type f -name "libopentracing.a" -exec cp {} libopentracing.a \; && cd /opt/e2/RIC-E2-TERMINATION && ls nlohmann  \

FROM ubuntu:18.04
RUN apt-get update && apt-get install -y net-tools iputils-ping curl tcpdump && mkdir -p /opt/e2/config

COPY --from=ubuntu /opt/e2/e2 /opt/e2/e2
COPY --from=ubuntu /opt/e2/rmr.verbose /tmp/rmr.verbose
COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/dockerRouter.txt /opt/e2/dockerRouter.txt
COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/config/config.conf /opt/e2/config/config.conf
COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/startup.sh /opt/e2/startup.sh
#COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/tracelibcpp/build/libtracelibcpp.so /usr/local/lib/libtracelibcpp.so
#COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/tracelibcpp/build/libtracelibcpp.so.0 /usr/local/lib/libtracelibcpp.so.0
#COPY --from=ubuntu /opt/e2/RIC-E2-TERMINATION/tracelibcpp/build/libtracelibcpp.so.0.0.2 /usr/local/lib/libtracelibcpp.so.0.0.2
#COPY --from=ubuntu /usr/local/lib/librmr_nng.a /usr/local/lib/librmr_nng.a

COPY --from=ubuntu /usr/local/lib/libnng.so  /usr/local/lib/libnng.so
COPY --from=ubuntu /usr/local/lib/libnng.so.1  /usr/local/lib/libnng.so.1
COPY --from=ubuntu /usr/local/lib/libnng.so.1.1.0  /usr/local/lib/libnng.so.1.1.0
#
COPY --from=ubuntu /usr/local/lib/librmr_nng.so.3.6.2 /usr/local/lib/librmr_nng.so.3.6.2
COPY --from=ubuntu /usr/local/lib/librmr_si.so.3.6.2 /usr/local/lib/librmr_si.so.3.6.2
COPY --from=ubuntu /usr/local/lib/librmr_si.so.3  /usr/local/lib/librmr_si.so.3
COPY --from=ubuntu /usr/local/lib/librmr_si.so /usr/local/lib/librmr_si.so
COPY --from=ubuntu /usr/local/lib/librmr_nng.so.3 /usr/local/lib/librmr_nng.so.3
COPY --from=ubuntu /usr/local/lib/librmr_nng.so  /usr/local/lib/librmr_nng.so


COPY --from=ubuntu /usr/local/lib/libmdclog.so.0 /usr/local/lib/libmdclog.so.0

COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libcgreen.so /usr/local/libcgreen.so
COPY --from=ubuntu //usr/lib/x86_64-linux-gnu/libcgreen.so.1 /usr/local/libcgreen.so.1
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libcgreen.so.1.2.0 /usr/local/libcgreen.so.1.2.0

COPY --from=ubuntu /usr/lib/libboost_log_setup.so /usr/lib/libboost_log_setup.so
COPY --from=ubuntu /usr/lib/libboost_log_setup.so.1.69.0 /usr/lib/libboost_log_setup.so.1.69.0

#COPY --from=ubuntu /usr/local/lib/libpistache.so  /usr/local/lib/libpistache.so
#COPY --from=ubuntu /usr/local/lib/libpistache.so.0  /usr/local/lib/libpistache.so.0
#COPY --from=ubuntu /usr/local/lib/libpistache.so.0.0.001-git20191031  /usr/local/lib/libpistache.so.0.0.001-git20191031


COPY --from=ubuntu /usr/lib/libboost_log.so /usr/lib/libboost_log.so
COPY --from=ubuntu /usr/lib/libboost_log.so.1.69.0 /usr/lib/libboost_log.so.1.69.0

COPY --from=ubuntu /usr/lib/libboost_thread.so /usr/lib/libboost_thread.so
COPY --from=ubuntu /usr/lib/libboost_thread.so.1.69.0 /usr/lib/libboost_thread.so.1.69.0

COPY --from=ubuntu /usr/lib/libboost_filesystem.so /usr/lib/libboost_filesystem.so
COPY --from=ubuntu /usr/lib/libboost_filesystem.so.1.69.0 /usr/lib/libboost_filesystem.so.1.69.0

COPY --from=ubuntu /usr/lib/libboost_regex.so /usr/lib/libboost_regex.so
COPY --from=ubuntu /usr/lib/libboost_regex.so.1.69.0 /usr/lib/libboost_regex.so.1.69.0

COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicui18n.so /usr/lib/libicui18n.so
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicui18n.so.60.2 /usr/lib/libicui18n.so.60.2
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicui18n.so.60 /usr/lib/libicui18n.so.60

COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicuuc.so /usr/lib/libicuuc.so
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicuuc.so.60.2 /usr/lib/libicuuc.so.60.2
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicuuc.so.60 /usr/lib/libicuuc.so.60

COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicudata.so /usr/lib/libicudata.so
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicudata.so.60.2 /usr/lib/libicudata.so.60.2
COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libicudata.so.60 /usr/lib/libicudata.so.60

COPY --from=ubuntu /usr/lib/x86_64-linux-gnu/libstdc++.so.6 /usr/lib/libstdc++.so.6

WORKDIR /opt/e2/
ENV LD_LIBRARY_PATH=/usr/local/lib
ENV RMR_SEED_RT=dockerRouter.txt
ENV E2TERM_POD_NAME=e2term
RUN chmod +x /opt/e2/startup.sh
EXPOSE 38000
CMD ["sh", "-c", "./startup.sh"]