Automation/Tests/Resource/Keywords.robot

##############################################################################
#
#   Copyright (c) 2019 AT&T Intellectual Property.
#
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.
#
##############################################################################
#
#   This source code is part of the near-RT RIC (RAN Intelligent Controller)
#   platform project (RICP).
#

*** Settings ***
Documentation   Keywords file
Library     ../Scripts/cleanup_db.py
Library     ../Scripts/k8s_helper.py
Resource   ../Resource/resource.robot
Library     OperatingSystem
Library     Process

*** Keywords ***
Get Request node b gnb
    Sleep    1s
    GET      ${getNodeb}

Update Gnb request
    Sleep  1s
    PUT    ${update_gnb_url}   ${update_gnb_body}

Add eNb Request
    Sleep  1s
    POST    ${enb_url}   ${add_enb_request_body}

Delete eNb Request
    Sleep  1s
    DELETE    ${enb_url}/${enb_ran_name}

Update eNb Request
    Sleep  1s
    PUT    ${enb_url}/${enb_ran_name}   ${update_enb_request_body}

Set General Configuration request
    Sleep  1s
    PUT    ${set_general_configuration}   ${set_general_configuration_body}

Update Gnb request not valid
    Sleep  1s
    PUT    ${update_gnb_url}   ${update_gnb_body_notvalid}

Remove log files
    Remove File  ${EXECDIR}/${gnb_log_filename}
    Remove File  ${EXECDIR}/${e2mgr_log_filename}
    Remove File  ${EXECDIR}/${e2t_log_filename}


Save logs
    Sleep   1s
    Run     ${Save_sim_log}
    Run     ${Save_e2mgr_log}
    Run     ${Save_e2t_log}

Prepare Enviorment
     [Arguments]     ${need_to_restart_pods}=${False}     ${set_new_timestamp}=${True}
     Init logs
     Flush And Populate DB    ${set_new_timestamp}
     Run keyword if  ${need_to_restart_pods}==${True}   Restart RM and GNB Simulator
     Wait until keyword succeeds  2 min    10 sec    Validate Required Dockers

Restart RM and GNB Simulator
    Restart routing manager
    Wait until keyword succeeds  2 min    10 sec    Validate Required Dockers
    Restart simulator


Init logs
    ${starting_timestamp}    Evaluate   datetime.datetime.now(datetime.timezone.utc).isoformat("T")   modules=datetime
    ${e2t_log_filename}      Evaluate      "e2t.${SUITE NAME}.log".replace(" ","-")
    ${e2mgr_log_filename}    Evaluate      "e2mgr.${SUITE NAME}.log".replace(" ","-")
    ${gnb_log_filename}      Evaluate      "gnb.${SUITE NAME}.log".replace(" ","-")
    ${Save_sim_log}          Evaluate  "kubectl -n ricplt logs --since-time=${starting_timestamp} $(${gnbe2_sim_pod}) > ${gnb_log_filename}"
    ${Save_e2mgr_log}        Evaluate   "kubectl -n ricplt logs --since-time=${starting_timestamp} $(${e2mgr_pod}) > ${e2mgr_log_filename}"
    ${Save_e2t_log}          Evaluate   "kubectl -n ricplt logs --since-time=${starting_timestamp} $(${e2term_pod}) > ${e2t_log_filename}"
    Set Suite Variable  ${e2t_log_filename}
    Set Suite Variable  ${e2mgr_log_filename}
    Set Suite Variable  ${gnb_log_filename}
    Set Suite Variable  ${Save_sim_log}
    Set Suite Variable  ${Save_e2mgr_log}
    Set Suite Variable  ${Save_e2t_log}

Validate Required Dockers
    [Arguments]    ${required_number_of_dockers}=${pods_number}
    Log To Console  Validating all required dockers are up
    ${result}=  Run And Return Rc And Output     ${verify_all_pods_are_ready_command}
    Should Be Equal As Integers    ${result[1]}    ${required_number_of_dockers}

Start E2
     Log to Console  Starting E2Term
     Run And Return Rc And Output    ${start_e2}
     Sleep  5s

Stop E2
     Log to Console  Stopping E2Term
     Run And Return Rc And Output    ${stop_e2}
     Sleep  5s

Start E2 Manager
     Log to Console  Starting E2Mgr
     Run And Return Rc And Output    ${start_e2mgr}
     Sleep  5s

Stop E2 Manager
     Log to Console  Stopping E2Mgr
     Run And Return Rc And Output    ${stop_e2mgr}
     Sleep  5s

Start Dbass
     Log to Console  Starting redis
     Run And Return Rc And Output    ${dbass_start}
     Sleep  5s

Stop Dbass
     Log to Console  Stopping redis
     Run And Return Rc And Output    ${dbass_stop}
     Sleep  5s

Stop Simulator
    log to console  Stopping gnbe2 simulator
    Run And Return Rc And Output    ${stop_simu}
    Sleep  90s

Start Simulator
    log to console  Starting gnbe2 simulator
    Run And Return Rc And Output    ${start_simu}

Restart simulator
   Log to Console  Restarting gnbe2 simulator
   Stop Simulator
   Start Simulator

Start Routing Manager
    Log to Console  Starting routing manager
    Run And Return Rc And Output    ${start_routing_manager}
    Sleep  5s

Stop Routing Manager
    Log to Console  Stopping routing manager
    Run And Return Rc And Output    ${stop_routing_manager}
    Sleep  5s

Restart Routing Manager
    Log to Console  Restarting routing manager
    Stop Routing Manager
    Start Routing Manager

Flush And Populate DB
    [Arguments]    ${set_new_timestamp}=${True}
    Log To Console  Flushing and populating DB
    ${flush}=  cleanup_db.flush    ${set_new_timestamp}
    Sleep  2s
    Should Be Equal As Strings  ${flush}  True

Stop All Pods Except Simulator
    Stop E2 Manager
    Stop Dbass
    Stop E2
    Stop Routing Manager

Start Redis Monitor
    Log To Console  Starting redis monitor log
    ${redis_monitor_log_filename}      Evaluate      "redis_monitor.${SUITE NAME}.log".replace(" ","-")
    Set Suite Variable  ${redis_monitor_log_filename}
    Remove File  ${EXECDIR}/${redis_monitor_log_filename}
    Start Process    kubectl -n ricplt exec -it statefulset-ricplt-dbaas-server-0 redis-cli MONITOR>${EXECDIR}/${redis_monitor_log_filename}  shell=yes

Stop Redis Monitor
    Log To Console  Stopping redis monitor log
    log_scripts.kill_redis_monitor_root_process


Redis Monitor Logs - Verify Publish To Manipulation Channel
    [Arguments]       ${ran_name}    ${event}
    Log To Console  Verify Publish To Manipulation Channel
    ${result}=  log_scripts.verify_redis_monitor_manipulation_message   ${EXECDIR}/${redis_monitor_log_filename}  ${ran_name}    ${event}
    Should Be Equal As Strings    ${result}      True

Redis Monitor Logs - Verify Publish To Connection Status Channel
    [Arguments]       ${ran_name}    ${event}
    Log To Console    Verify Publish To Connection Status Channel
    ${result}=  log_scripts.verify_redis_monitor_connection_status_message   ${EXECDIR}/${redis_monitor_log_filename}  ${ran_name}    ${event}
    Should Be Equal As Strings    ${result}      True