blob: a4b40e4893c927c8903af3b3f69fe5e49b287bba [file] [log] [blame]
/*******************************************************************************
*
* Copyright (c) 2019 AT&T Intellectual Property.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*******************************************************************************/
/*
* This source code is part of the near-RT RIC (RAN Intelligent Controller)
* platform project (RICP).
*/
package e2pdus
import (
"e2mgr/logger"
"fmt"
"strings"
"testing"
)
func TestPrepareEndcConfigurationUpdateFailurePDU(t *testing.T) {
_,err := logger.InitLogger(logger.InfoLevel)
if err!=nil{
t.Errorf("failed to initialize logger, error: %s", err)
}
packedPdu := "402500080000010005400142"
packedEndcConfigurationUpdateFailure := PackedEndcConfigurationUpdateFailure
tmp := fmt.Sprintf("%x", packedEndcConfigurationUpdateFailure)
if len(tmp) != len(packedPdu) {
t.Errorf("want packed len:%d, got: %d\n", len(packedPdu)/2, len(packedEndcConfigurationUpdateFailure)/2)
}
if strings.Compare(tmp, packedPdu) != 0 {
t.Errorf("\nwant :\t[%s]\n got: \t\t[%s]\n", packedPdu, tmp)
}
}
func TestPrepareEndcConfigurationUpdateFailurePDUFailure(t *testing.T) {
_, err := logger.InitLogger(logger.InfoLevel)
if err != nil {
t.Errorf("failed to initialize logger, error: %s", err)
}
err = prepareEndcConfigurationUpdateFailurePDU(1, 4096)
if err == nil {
t.Errorf("want: error, got: success.\n")
}
expected:= "#configuration_update.prepareEndcConfigurationUpdateFailurePDU - failed to build and pack the endc configuration update failure message #src/asn1codec_utils.c.pack_pdu_aux - Encoded output of E2AP-PDU, is too big"
if !strings.Contains(err.Error(), expected) {
t.Errorf("want :[%s], got: [%s]\n", expected, err)
}
}
func TestPrepareX2EnbConfigurationUpdateFailurePDU(t *testing.T) {
_,err := logger.InitLogger(logger.InfoLevel)
if err!=nil{
t.Errorf("failed to initialize logger, error: %s", err)
}
packedPdu := "400800080000010005400142"
packedEndcX2ConfigurationUpdateFailure := PackedX2EnbConfigurationUpdateFailure
tmp := fmt.Sprintf("%x", packedEndcX2ConfigurationUpdateFailure)
if len(tmp) != len(packedPdu) {
t.Errorf("want packed len:%d, got: %d\n", len(packedPdu)/2, len(packedEndcX2ConfigurationUpdateFailure)/2)
}
if strings.Compare(tmp, packedPdu) != 0 {
t.Errorf("\nwant :\t[%s]\n got: \t\t[%s]\n", packedPdu, tmp)
}
}
func TestPrepareX2EnbConfigurationUpdateFailurePDUFailure(t *testing.T) {
_, err := logger.InitLogger(logger.InfoLevel)
if err != nil {
t.Errorf("failed to initialize logger, error: %s", err)
}
err = prepareX2EnbConfigurationUpdateFailurePDU(1, 4096)
if err == nil {
t.Errorf("want: error, got: success.\n")
}
expected:= "#configuration_update.prepareX2EnbConfigurationUpdateFailurePDU - failed to build and pack the x2 configuration update failure message #src/asn1codec_utils.c.pack_pdu_aux - Encoded output of E2AP-PDU, is too big"
if !strings.Contains(err.Error(), expected) {
t.Errorf("want :[%s], got: [%s]\n", expected, err)
}
}
func TestPrepareEndcConfigurationUpdateAckPDU(t *testing.T) {
_,err := logger.InitLogger(logger.InfoLevel)
if err!=nil{
t.Errorf("failed to initialize logger, error: %s", err)
}
packedPdu := "2025000a00000100f70003000000"
packedEndcConfigurationUpdateAck := PackedEndcConfigurationUpdateAck
tmp := fmt.Sprintf("%x", packedEndcConfigurationUpdateAck)
if len(tmp) != len(packedPdu) {
t.Errorf("want packed len:%d, got: %d\n", len(packedPdu)/2, len(packedEndcConfigurationUpdateAck)/2)
}
if strings.Compare(tmp, packedPdu) != 0 {
t.Errorf("\nwant :\t[%s]\n got: \t\t[%s]\n", packedPdu, tmp)
}
}
func TestPrepareEndcConfigurationUpdateAckPDUFailure(t *testing.T) {
_, err := logger.InitLogger(logger.InfoLevel)
if err != nil {
t.Errorf("failed to initialize logger, error: %s", err)
}
err = prepareEndcConfigurationUpdateAckPDU(1, 4096)
if err == nil {
t.Errorf("want: error, got: success.\n")
}
expected:= "#configuration_update.prepareEndcConfigurationUpdateAckPDU - failed to build and pack the endc configuration update ack message #src/asn1codec_utils.c.pack_pdu_aux - Encoded output of E2AP-PDU, is too big"
if !strings.Contains(err.Error(), expected) {
t.Errorf("want :[%s], got: [%s]\n", expected, err)
}
}
func TestPrepareX2EnbConfigurationUpdateAckPDU(t *testing.T) {
_,err := logger.InitLogger(logger.InfoLevel)
if err!=nil{
t.Errorf("failed to initialize logger, error: %s", err)
}
packedPdu := "200800080000010011400100"
packedEndcX2ConfigurationUpdateAck := PackedX2EnbConfigurationUpdateAck
tmp := fmt.Sprintf("%x", packedEndcX2ConfigurationUpdateAck)
if len(tmp) != len(packedPdu) {
t.Errorf("want packed len:%d, got: %d\n", len(packedPdu)/2, len(packedEndcX2ConfigurationUpdateAck)/2)
}
if strings.Compare(tmp, packedPdu) != 0 {
t.Errorf("\nwant :\t[%s]\n got: \t\t[%s]\n", packedPdu, tmp)
}
}
func TestPrepareX2EnbConfigurationUpdateAckPDUFailure(t *testing.T) {
_, err := logger.InitLogger(logger.InfoLevel)
if err != nil {
t.Errorf("failed to initialize logger, error: %s", err)
}
err = prepareX2EnbConfigurationUpdateAckPDU(1, 4096)
if err == nil {
t.Errorf("want: error, got: success.\n")
}
expected:= "#configuration_update.prepareX2EnbConfigurationUpdateAckPDU - failed to build and pack the x2 configuration update ack message #src/asn1codec_utils.c.pack_pdu_aux - Encoded output of E2AP-PDU, is too big"
if !strings.Contains(err.Error(), expected) {
t.Errorf("want :[%s], got: [%s]\n", expected, err)
}
}