| .. This work is licensed under a Creative Commons Attribution 4.0 International License. |
| .. SPDX-License-Identifier: CC-BY-4.0 |
| .. CAUTION: this document is generated from source in doc/src/rtd. |
| .. To make changes edit the source and recompile the document. |
| .. Do NOT make changes directly to .rst or .md files. |
| |
| ============================================================================================ |
| RMR Release Notes |
| ============================================================================================ |
| |
| |
| RMR Release Notes |
| ================= |
| |
| The following is a list of release highlights for the RMR |
| library. At one point in time the RMR repo also housed a |
| wrapper library with a separate version and release cycle. |
| This resulted in *leap frogging* versions for each package; |
| the RMR core library was assigned odd major numbers (e.g. |
| 3.1.0). When the wrapper code was moved to a different repo |
| the need to leap frog versions ceased, and beginning with |
| version 4.0.0, the RMR versions should no longer skip. |
| |
| |
| 2020 December 4; Version 4.4.6 |
| ------------------------------ |
| |
| Correct a range check bug when cloning a route table in prep |
| to load a new one. (RIC-720) |
| |
| |
| |
| 2020 November 17; Version 4.4.5 |
| ------------------------------- |
| |
| Correct bug in round robin group allocation that could lead |
| to an empty group. (RIC-695) |
| |
| |
| |
| 2020 November 13; Version 4.4.4 |
| ------------------------------- |
| |
| Correct address memory leak in the RTE cleanup. (RIC-674) |
| |
| |
| |
| 2020 November 4; Version 4.4.3 |
| ------------------------------ |
| |
| Correct bug introduced with race fix (4.4.0) (RIC-674) |
| |
| |
| |
| 2020 November 4; Version 4.4.2 |
| ------------------------------ |
| |
| Changes to correct more complaints generated by a code scan. |
| (RIC-673) Also addressed some sonar coverage issues with unit |
| test changes. |
| |
| |
| |
| 2020 November 4; Version 4.4.1 |
| ------------------------------ |
| |
| Changes to correct complaints generated by a code scan. |
| (RIC-673) |
| |
| |
| |
| 2020 November 4; Version 4.4.0 |
| ------------------------------ |
| |
| Changes to address a potential race condition when route |
| tables arrive in quick succession. (RIC-674) |
| |
| |
| |
| 2020 October 30; Version 4.3.1 |
| ------------------------------ |
| |
| Changes to address code analyser scans and two bug fixes |
| identified while addressing the analysis data. (RIC-673) |
| |
| |
| |
| 2020 October 2; Version 4.3.0 |
| ----------------------------- |
| |
| Add message types for traffic steering anomaly messages |
| |
| |
| |
| 2020 September 15; Version 4.2.4 |
| -------------------------------- |
| |
| Add man page for the rmr_set_low_latency() function (RIC-631) |
| |
| |
| |
| 2020 September 15; Version 4.2.3 |
| -------------------------------- |
| |
| Correct arg processing bug in rmr_rpobe (RIC-645) |
| |
| |
| |
| 2020 August 4; Version 4.2.2 |
| ---------------------------- |
| |
| Correct bug in the rmr_probe support utility when -r option |
| is used on the command line (RIC-644) |
| |
| |
| |
| 2020 August 4; Version 4.2.1 |
| ---------------------------- |
| |
| Add additional environment variable dump if RMR_LOG_VLEVEL |
| set to 4 at start. |
| |
| |
| |
| 2020 August 3; Version 4.2.0 |
| ---------------------------- |
| |
| Add support for the RMR_RTREQ_FREQ environment variable to |
| control the request frequency for a new route table (default |
| 5s if not supplied). (RIC-630) |
| |
| |
| |
| 2020 July 21; Version 4.1.4 |
| --------------------------- |
| |
| Fix bug in SI95 -- possible use of pointer after free |
| (RIC-626). |
| |
| |
| |
| 2020 July 9; version 4.1.3 |
| -------------------------- |
| |
| Allow RTS messages to be sent before the arrival of the |
| initial route table. Calls to RTS (heart beat responses) |
| prior to the initial route table load could cause a crash if |
| a framework blindly assumes that RTS is valid. (RIC-589) |
| |
| |
| |
| 2020 June 22; version 4.1.2 |
| --------------------------- |
| |
| Fix typo in RIC Message header file. |
| |
| Add document for message type constants and the scripts which |
| generate them. |
| |
| |
| |
| 2020 June 22; version 4.1.1 |
| --------------------------- |
| |
| Add new message types to RIC header file for |
| RIC_ALARM (110) |
| RIC_ALARM_QUERY (111) |
| RIC_METRICS (120) |
| RAN_E2_RESET_REQ (12008) |
| RAN_E2_RESET_RESP (12009) |
| |
| |
| |
| 2020 June 18; version 4.1.0 |
| --------------------------- |
| |
| Bump version minor to move away from 4.0.* which will bump |
| for any patches applied back to bronze. |
| |
| Add magic C++ goo to symtab header file allowing C++ xAPPs to |
| use the symbol table directly. |
| |
| |
| |
| Bronze Release |
| ============== |
| |
| |
| |
| 2020 May 06; version 4.0.5 |
| -------------------------- |
| |
| Fix the bug in SI95 receive message management semaphore |
| count issue. (RIC-355) |
| |
| |
| |
| 2020 April 29; version 4.0.4 |
| ---------------------------- |
| |
| Fix the traffic steering message type constants (again) |
| (RIC-342) |
| |
| |
| |
| 2020 April 28; version 4.0.3 |
| ---------------------------- |
| |
| Fix sonar flagged bugs (RIC-78) |
| |
| |
| |
| 2020 April 24; version 4.0.2 |
| ---------------------------- |
| |
| Correct bug in SI95 transport header length validation |
| (RIC-341) |
| |
| |
| |
| 2020 April 22; version 4.0.1 |
| ---------------------------- |
| |
| Correct message type constant for Traffic Steering |
| predication (RIC-342) |
| |
| |
| |
| 2020 April 21; version 4.0.0 |
| ---------------------------- |
| |
| The NNG based libraries are no longer included in the RMR |
| packages. This is considered a breaking change as NNG will |
| not be supported by default. It is still possible to build |
| with RMR-NNG libraries, but that is the exception. The API |
| between 3.8.2 and 4.0.0 is the SAME. Upgrading to 4.0.0 only |
| means that the underlying transport mechanism is limited only |
| to SI95. |
| |
| The rmr_rcv_specific() function has been deprecated as it was |
| necessary only for NNG and Nanomsg support. Its use should be |
| discontinued. |
| |
| |
| |
| 2020 April 20; version 3.8.2 |
| ---------------------------- |
| |
| Fix bug which was preventing an instance receiving dynamic |
| route table updates. (RIC-336) |
| |
| |
| |
| 2020 April 20; version 3.8.1 |
| ---------------------------- |
| |
| Add user guide which replaces the concatenation of man pages |
| (RIC-328) |
| |
| |
| |
| 2020 April 17; version 3.8.0 |
| ---------------------------- |
| |
| Add safe connect to avoid potential connect bug on Linux |
| (RIC-332) |
| |
| Change debugging in route table collector to avoid possible |
| segment fault when in level 2 debug (RIC-335) |
| |
| |
| |
| 2020 April 15; version 3.7.4 |
| ---------------------------- |
| |
| Add missing message type to header file (RIC-334) |
| |
| |
| |
| 2020 April 14; version 3.7.3 |
| ---------------------------- |
| |
| Fix bug in rmr_call() when using SI95 (RIC-333) |
| |
| |
| |
| 2020 April 10; version 3.7.2 |
| ---------------------------- |
| |
| Fix bug related to static route table only mode (RIC-331) |
| |
| |
| |
| 2020 April 9; version 3.7.1 |
| --------------------------- |
| |
| The max length restriction for receiving messages when using |
| SI95 has been removed. The length supplied during |
| initialisation is used as the "normal maximum" and default |
| buffer allocation size, but messages arriving which are |
| larger are accepted. (RIC-309) |
| |
| |
| |
| 2020 April 7; version 3.7.0 |
| --------------------------- |
| |
| The health check support programme was renamed to rmr_probe |
| (RIC-308). |
| |
| |
| |
| 2020 April 6; version 3.6.6 |
| --------------------------- |
| |
| Correct bug in SI95 address conversion module (RIC-327) |
| Correct bug in SI initialisation module |
| |
| |
| |
| 2020 April 2; version 3.6.5 |
| --------------------------- |
| |
| Correct potential nil pointer use when examining interfaces |
| for use as a listen target (RIC-307) |
| |
| |
| |
| 2020 April 1; version 3.6.4 |
| --------------------------- |
| |
| Correct potential nil pointer use in the NNG interface |
| (RIC-303) Correct issue preventing CI build without a |
| container |
| |
| |
| |
| 2020 March 30; version 3.6.3 |
| ---------------------------- |
| |
| Correct the max receive message size constant in rmr.h |
| (RIC-301) |
| |
| |
| |
| 2020 March 23; version 3.6.2 |
| ---------------------------- |
| |
| Fix message initialisation bug when pulling a message from |
| the pool (RIC-295) |
| |
| |
| |
| 2020 March 19; version 3.6.1 |
| ---------------------------- |
| |
| Fix problem with RPM package install |
| |
| |
| |
| 2020 March 18; version 3.6.0 |
| ---------------------------- |
| |
| Add message types to support traffic steering |
| |
| |
| |
| 2020 March 16; version 3.5.2 |
| ---------------------------- |
| |
| Correct bug in the meid table parser that prevented the |
| ack/nack of meid tables (RIC-273) |
| |
| |
| |
| 2020 March 10; version 3.5.1 |
| ---------------------------- |
| |
| Add missing health check message types. |
| |
| |
| |
| 2020 March 9; version 3.5.0 |
| --------------------------- |
| |
| Added new wormhole send function: rmr_wh_call(). |
| |
| |
| |
| 2020 March 6; version 3.4.0 |
| --------------------------- |
| |
| Add new wormhole state function: rmr_wh_state(). |
| |
| |
| |
| 2020 March 5; Version 3.3.1 |
| --------------------------- |
| |
| Correct several "bugs" identified by automatic code analysis. |
| |
| |
| |
| 2020 March 4; Version 3.3.0 |
| --------------------------- |
| |
| Add SI95 based unit testing Health check support binary added |
| (reason for minor bump) |
| |
| |
| |
| 2020 February 26; version 3.2.5 |
| ------------------------------- |
| |
| Fix source address bug in SI95 receive/send funcitons. Fix |
| threading issues involving session disconnection in SI95 |
| Remove unused SI95 status variable. |
| |
| |
| |
| 2020 February 24; version 3.2.4 |
| ------------------------------- |
| |
| Fix meid bug (RIC-220) causing core dump. |
| |
| |
| |
| 2020 February 21; version 3.2.3 |
| ------------------------------- |
| |
| Add meid routing support to the SI95 interface. |
| |
| |
| |
| 2020 February 20; version 3.2.2 |
| ------------------------------- |
| |
| Fix receive thread related core dump (ring early unlock). |
| |
| |
| |
| 2020 February 19; version 3.2.1 |
| ------------------------------- |
| |
| Added missing message types (E2-Setup) |
| |
| |
| |
| 2020 February 18; version 3.2.0 |
| ------------------------------- |
| |
| Added support for new Route Manager and it's ability to |
| accept a request for table update. |
| |
| |
| |
| 2020 February 14; version 3.1.3 |
| ------------------------------- |
| |
| Fix bug in SIsend which was causing a core dump in some cases |
| where the application attempted to send on a connection that |
| had disconnected. (RIC-207). |
| |
| |
| |
| 2020 February 6; version 3.1.2 |
| ------------------------------ |
| |
| Fix disconnection detection bug in interface to SI95. |
| |
| |
| |
| 2020 January 31; verison 3.1.1 |
| ------------------------------ |
| |
| Allow route table thread logging to be completely disabled |
| when logging is turned off. |
| |
| |
| |
| 2020 January 26; verison 3.1.0 |
| ------------------------------ |
| |
| First step to allowing the user programme to control messages |
| written to standard error. Introduces the rmr_set_vlevel() |
| function, and related environment variable. |
| |
| |
| |
| 2020 January 24; verison 3.0.5 |
| ------------------------------ |
| |
| Fix bug in SI95 with receive buffer allocation. |
| |
| |
| |
| 2020 January 23; verison 3.0.4 |
| ------------------------------ |
| |
| Fix bug in SI95 causing excessive CPU usage on poll. |
| |
| |
| |
| 2020 January 22; verison 3.0.3 |
| ------------------------------ |
| |
| Enable thread support for multiple receive threads. |
| |
| |
| |
| 2020 January 21; verison 3.0.2 |
| ------------------------------ |
| |
| Fix bug in SI95 (missing reallocate payload function). |
| |
| |
| |
| 2020 January 20; verison 3.0.1 |
| ------------------------------ |
| |
| Enable support for dynamic route table updates via RMR |
| session. |
| |
| |
| |
| 2020 January 16; version 3.0.0 |
| ------------------------------ |
| |
| Introduce support for SI95 transport library to replace NNG. |
| (RMR library versions will use leading odd numbers to avoid |
| tag collisions with the wrapper tags which will use even |
| numbers.) |
| |
| |
| |
| 2019 December 9; version 1.13.1 |
| ------------------------------- |
| |
| Correct documentation and missing rel-notes update for RTD. |
| |
| |
| |
| 2019 December 6; version 1.13.0 |
| ------------------------------- |
| |
| Add ability to route messages based on the MEID in a message |
| combined with the message type/subscription-ID. |
| |
| |
| |
| Amber Release |
| ============= |
| |
| |
| |
| 2019 November 14; version 1.11.1 |
| -------------------------------- |
| |
| Fix bug in payload reallocation function; correct length of |
| payload was not always copied. |
| |
| |
| |
| 2019 November 13; version 1.12.1 |
| -------------------------------- |
| |
| New message type constants added to support A1. |
| |
| |
| |
| 2019 November 4; version 1.11.0 |
| ------------------------------- |
| |
| Version bump to move away from the 1.10.* to distinguish |
| between release A and the trial. |
| |
| |
| |
| 2019 November 7; version 1.12.0 |
| ------------------------------- |
| |
| Version cut to support continued development for next release |
| preserving the 1.11.* versions for release 1 (Amber) and |
| related fixes. |
| |
| |
| |
| 2019 October 31; version 1.10.2 |
| ------------------------------- |
| |
| Provide the means to increase the payload size of a received |
| message without losing the data needed to use the |
| rmr_rts_msg() funciton. |
| |
| |
| |
| 2019 October 21; version 1.10.1 |
| ------------------------------- |
| |
| Fix to prevent null message buffer from being returned by the |
| timeout receive function if the function is passed one to |
| reuse. |
| |
| |
| |
| 2019 October 21; version 1.10.1 |
| ------------------------------- |
| |
| Add periodic dump of send count info to stderr. |
| |
| |
| |
| 2019 September 27; version 1.9.0 |
| -------------------------------- |
| |
| Python bindings added receive all queued function and |
| corrected a unit test |
| |
| |
| |
| 2019 September 25; version 1.8.3 |
| -------------------------------- |
| |
| Correct application level test issue causing timing problems |
| during jenkins verification testing at command and merge |
| |
| Handle the NNG connection shutdown status which may now be |
| generated when a connection throug a proxy is reset. |
| |
| |
| |
| 2019 September 25; version 1.8.2 |
| -------------------------------- |
| |
| Correct bug in rmr_torcv_msg() when timeout set to zero (0). |
| |
| |
| |
| 2019 September 19; version 1.8.1 |
| -------------------------------- |
| |
| Correct missing constant for wrappers. |
| |
| |
| |
| 2019 September 19; version 1.8.0 |
| -------------------------------- |
| |
| New message types added: |
| RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED |
| |
| |
| |
| 2019 September 17; version 1.7.0 |
| -------------------------------- |
| |
| Initial connection mode now defaults to asynchronous. Set |
| RMR_ASYNC_CONN=0 in the environment before rmr_init() is |
| invoked to revert to synchronous first TCP connections. |
| (Recovery connection attempts have always been asynchronous). |
| |
| |
| |
| 2019 September 3; version 1.6.0 |
| ------------------------------- |
| |
| Fix bug in the rmr_rts_msg() function. If a return to sender |
| message failed, the source IP address was not correctly |
| adjusted and could cause the message to be "reflected" back |
| to the sender on a retry. |
| |
| Added the ability to set the source "ID" via an environment |
| var (RMR_SRC_ID). When present in the environment, the string |
| will be placed in to the message header as the source and |
| thus be used by an application calling rmr_rts_smg() to |
| return a response to the sender. If this environment variable |
| is not present, the host name (original behaviour) is used. |
| |
| |
| |
| 2019 August 26; version 1.4.0 |
| ----------------------------- |
| |
| New message types were added. |
| |
| |
| |
| 2019 August 16; version 1.3.0 |
| ----------------------------- |
| |
| New mesage types added. |
| |
| |
| |
| 2019 August 13; version 1.2.0 (API change, non-breaking) |
| -------------------------------------------------------- |
| |
| The function rmr_get_xact() was added to proide a convenient |
| way to extract the transaction field from a message. |
| |
| |
| |
| 2019 August 8; version 1.1.0 (API change) |
| ----------------------------------------- |
| |
| This change should be backward compatable/non-breaking A new |
| field has been added to the message buffer (rmr_mbuf_t). This |
| field (tp_state) is used to communicate the errno value that |
| the transport mechanism might set during send and/or receive |
| operations. C programmes should continue to use errno |
| directly, but in some environments wrappers may not be able |
| to access errno and this provides the value to them. See the |
| rmr_alloc_msg manual page for more details. |
| |
| |
| |
| 2019 August 6; version 1.0.45 (build changes) |
| --------------------------------------------- |
| |
| Support for the Nanomsg transport library has been dropped. |
| The library librmr.* will no longer be included in packages. |
| |
| Packages will install RMR libraries into the system preferred |
| target directory. On some systems this is /usr/local/lib |
| and on others it is /usr/local/lib64. The diretory is |
| determined by the sytem on which the package is built and |
| NOT by the system installing the package, so it's possible |
| that the RMR libraries end up in a strange location if the |
| .deb or .rpm file was generated on a Linux flavour that |
| has a different preference than the one where the package |
| is installed. |
| |
| |
| |
| 2019 August 6; version 1.0.44 (API change) |
| ------------------------------------------ |
| |
| Added a new message type constant. |
| |
| |
| |
| 2019 July 15; Version 1.0.39 (bug fix) |
| -------------------------------------- |
| |
| Prevent unnecessary usleep in retry loop. |
| |
| |
| |
| 2019 July 12; Version 1.0.38 (API change) |
| ----------------------------------------- |
| |
| Added new message types to RIC_message_types.h. |
| |
| |
| |
| 2019 July 11; Version 1.0.37 |
| ---------------------------- |
| |
| |
| librmr and librmr_nng |
| - Add message buffer API function rmr_trace_ref() |
| (see rmr_trace_ref.3 manual page in dev package). |
| |
| |
| |
| 2020 April 8; Version n/a |
| ------------------------- |
| |
| RMR Python moved to Python Xapp Framework |
| (https://gerrit.o-ran-sc.org/r/admin/repos/ric-plt/xapp-frame-py) |
| |
| |
| |
| 2020 February 29; Version 2.4.0 |
| ------------------------------- |
| |
| Add consolidated testing under CMake Add support binary for |
| health check (SI95 only) |
| |
| |
| |
| 2020 February 28; Version 2.3.6 |
| ------------------------------- |
| |
| Fix bug in Rt. Mgr comm which prevented table ID from being |
| sent on ack message (RIC-232). |