| # this file should contain ONLY the changes related to the |
| # core RMR code and doc. Other change files exist for other |
| # things. |
| |
| # API and build change and fix summaries. Doc correctsions |
| # and/or changes are not mentioned here; see the commit messages. |
| |
| 2020 April 1; version 3.6.4 |
| Correct potential nil pointer use in the NNG interface (RIC-303) |
| Correct issue preventing CI build without a container |
| |
| 2020 March 30; version 3.6.3 |
| Correct the max receive message size constant in rmr.h (RIC-301) |
| |
| 2020 March 23; version 3.6.2 |
| Fix message initialisation bug when pulling a message from |
| the pool (RIC-295) |
| |
| 2020 March 19; version 3.6.1 |
| Fix problem with RPM package install |
| |
| 2020 March 18; version 3.6.0 |
| Add message types to support traffic steering |
| |
| 2020 March 16; version 3.5.2 |
| Correct bug in the meid table parser that prevented the |
| ack/nack of meid tables (RIC-273) |
| |
| 2020 March 10; version 3.5.1 |
| Add missing health check message types. |
| |
| 2020 March 9; version 3.5.0 |
| Added new wormhole send function: rmr_wh_call(). |
| |
| 2020 March 6; version 3.4.0 |
| Add new wormhole state function: rmr_wh_state(). |
| |
| 2020 March 5; Version 3.3.1 |
| Correct several "bugs" identified by automatic code analysis. |
| |
| 2020 March 4; Version 3.3.0 |
| Add SI95 based unit testing |
| Health check support binary added (reason for minor bump) |
| |
| 2020 February 26; version 3.2.5 |
| Fix source address bug in SI95 receive/send funcitons. |
| Fix threading issues involving session disconnection in SI95 |
| Remove unused SI95 status variable. |
| |
| 2020 February 24; version 3.2.4 |
| Fix meid bug (RIC-220) causing core dump. |
| |
| 2020 February 21; version 3.2.3 |
| Add meid routing support to the SI95 interface. |
| |
| 2020 February 20; version 3.2.2 |
| Fix receive thread related core dump (ring early unlock). |
| |
| 2020 February 19; version 3.2.1 |
| Added missing message types (E2-Setup) |
| |
| 2020 February 18; version 3.2.0 |
| Added support for new Route Manager and it's ability to accept |
| a request for table update. |
| |
| 2020 February 14; version 3.1.3 |
| Fix bug in SIsend which was causing a core dump in some cases |
| where the application attempted to send on a connection that |
| had disconnected. (RIC-207). |
| |
| 2020 February 6; version 3.1.2 |
| Fix disconnection detection bug in interface to SI95. |
| |
| 2020 January 31; verison 3.1.1 |
| Allow route table thread logging to be completely disabled |
| when logging is turned off. |
| |
| 2020 January 26; verison 3.1.0 |
| First step to allowing the user programme to control messages |
| written to standard error. Introduces the rmr_set_vlevel() |
| function, and related environment variable. |
| |
| 2020 January 24; verison 3.0.5 |
| Fix bug in SI95 with receive buffer allocation. |
| |
| 2020 January 23; verison 3.0.4 |
| Fix bug in SI95 causing excessive CPU usage on poll. |
| |
| 2020 January 22; verison 3.0.3 |
| Enable thread support for multiple receive threads. |
| |
| 2020 January 21; verison 3.0.2 |
| Fix bug in SI95 (missing reallocate payload function). |
| |
| 2020 January 20; verison 3.0.1 |
| Enable support for dynamic route table updates via RMR session. |
| |
| 2020 January 16; version 3.0.0 |
| Introduce support for SI95 transport library to replace NNG. |
| (RMR library versions will use leading odd numbers to avoid tag collisions |
| with the wrapper tags which will use even numbers.) |
| |
| 2019 December 9; version 1.13.1 |
| Correct documentation and missing rel-notes update for RTD. |
| |
| 2019 December 6; version 1.13.0 |
| Add ability to route messages based on the MEID in a message combined |
| with the message type/subscription-ID. |
| |
| 2019 November 14; version 1.11.1 (Amber) |
| Fix bug in payload reallocation function; correct length of payload |
| was not always copied. |
| |
| 2019 November 13; version 1.12.1 |
| New message type constants added to support A1. |
| |
| 2019 November 4; version 1.11.0 (Amber) |
| Version bump to move away from the 1.10.* to distinguish between |
| release A and the trial. |
| |
| 2019 November 7; version 1.12.0 |
| Version cut to support continued development for next release |
| preserving the 1.11.* versions for release 1 (Amber) and |
| related fixes. |
| |
| 2019 October 31; version 1.10.2 |
| Provide the means to increase the payload size of a received message |
| without losing the data needed to use the rmr_rts_msg() funciton. |
| |
| 2019 October 21; version 1.10.1 |
| Fix to prevent null message buffer from being returned by the timeout |
| receive function if the function is passed one to reuse. |
| |
| 2019 October 21; version 1.10.1 |
| Add periodic dump of send count info to stderr. |
| |
| 2019 September 27; version 1.9.0 |
| Python bindings added receive all queued function and corrected a unit test |
| |
| 2019 September 25; version 1.8.3 |
| Correct application level test issue causing timing problems during |
| jenkins verification testing at command and merge |
| |
| Handle the NNG connection shutdown status which may now be |
| generated when a connection throug a proxy is reset. |
| |
| 2019 September 25; version 1.8.2 |
| Correct bug in rmr_torcv_msg() when timeout set to zero (0). |
| |
| 2019 September 19; version 1.8.1 |
| Correct missing constant for wrappers. |
| |
| 2019 September 19; version 1.8.0 |
| New message types added: |
| RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED |
| |
| 2019 September 17; version 1.7.0 |
| Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0 |
| in the environment before rmr_init() is invoked to revert to |
| synchronous first TCP connections. (Recovery connection attempts |
| have always been asynchronous). |
| |
| 2019 September 3; version 1.6.0 |
| Fix bug in the rmr_rts_msg() function. If a return to sender message |
| failed, the source IP address was not correctly adjusted and could |
| cause the message to be "reflected" back to the sender on a retry. |
| |
| Added the ability to set the source "ID" via an environment var |
| (RMR_SRC_ID). When present in the environment, the string will |
| be placed in to the message header as the source and thus be used |
| by an application calling rmr_rts_smg() to return a response to |
| the sender. If this environment variable is not present, the host |
| name (original behaviour) is used. |
| |
| 2019 August 26; version 1.4.0 |
| New message types were added. |
| |
| 2019 August 16; version 1.3.0 |
| New mesage types added. |
| |
| 2019 August 13; version 1.2.0 (API change, non-breaking) |
| The function rmr_get_xact() was added to proide a convenient |
| way to extract the transaction field from a message. |
| |
| 2019 August 8; version 1.1.0 (API change) |
| This change should be backward compatable/non-breaking |
| A new field has been added to the message buffer (rmr_mbuf_t). |
| This field (tp_state) is used to communicate the errno value |
| that the transport mechanism might set during send and/or |
| receive operations. C programmes should continue to use |
| errno directly, but in some environments wrappers may not be |
| able to access errno and this provides the value to them. |
| See the rmr_alloc_msg manual page for more details. |
| |
| 2019 August 6; version 1.0.45 (build changes) |
| Support for the Nanomsg transport library has been dropped. |
| The library librmr.* will no longer be included in packages. |
| |
| Packages will install RMR libraries into the system preferred |
| target directory. On some systems this is /usr/local/lib |
| and on others it is /usr/local/lib64. The diretory is |
| determined by the sytem on which the package is built and |
| NOT by the system installing the package, so it's possible |
| that the RMR libraries end up in a strange location if the |
| .deb or .rpm file was generated on a Linux flavour that |
| has a different preference than the one where the package |
| is installed. |
| |
| 2019 August 6; version 1.0.44 (API change) |
| Added a new message type constant. |
| |
| 2019 July 15; Version 1.0.39 (bug fix) |
| Prevent unnecessary usleep in retry loop. |
| |
| 2019 July 12; Version 1.0.38 (API change) |
| Added new message types to RIC_message_types.h. |
| |
| 2019 July 11; Version 1.0.37 |
| |
| librmr and librmr_nng |
| - Add message buffer API function rmr_trace_ref() |
| (see rmr_trace_ref.3 manual page in dev package). |
| |