dnsmasq.conf.example - thekelleys/dnsmasq - Gitiles

 # Configuration file for dnsmasq.
 #
 # Format is one option per line, legal options are the same
 # as the long options legal on the command line. See
 # "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.

 # Change these lines if you want dnsmasq to serve MX records.
 # Only one of mx-host and mx-target need be set, the other defaults
 # to the name of the host  running dnsmasq.
 #mx-host=
 #mx-target=
 #selfmx
 #localmx

 # The following three options make you a better netizen, since they
 # tell dnsmasq to filter out queries which the public DNS cannot
 # answer, and which load the servers (especially the root servers)
 # uneccessarily. If you have a dial-on-demand link they also stop
 # these requests from bringing up the link uneccessarily.

 # Never forward plain names (with a dot or domain part)
 domain-needed
 # Reply to reverse queries for addresses in the non-routed address
 # space with the dotted.quad address
 bogus-priv
 # Filter useless windows-originated DNS requests
 filterwin2k


 # Change this line if you want dns to get its upstream servers from
 # somewhere other that /etc/resolv.conf
 #resolv-file=

 # By  default,  dnsmasq  will  send queries to any of the upstream
 # servers it knows about and tries to favour servers to are  known
 # to  be  up.  Uncommenting this forces dnsmasq to try each query
 # with  each  server  strictly  in  the  order  they   appear   in
 # /etc/resolv.conf
 #strict-order

 # If you don't want dnsmasq to read /etc/resolv.conf or any other
 # file, getting its servers for this file instead (see below), then
 # uncomment this
 #no-resolv

 # If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
 # files for changes and re-read them then uncomment this.
 #no-poll

 # Add other name servers here, with domain specs if they are for
 # non-public domains.
 #server=/localnet/192.168.0.1

 # Add local-only domains here, queries in these domains are answered
 # from /etc/hosts or DHCP only.
 #local=/localnet/

 # Add domains which you want to force to an IP address here.
 # The example below send any host in doubleclick.net to a local
 # webserver.
 #address=/doubleclick.net/127.0.0.1

 # You no longer (as of version 1.7) need to set these to enable
 # dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
 # "dip" group to achieve this.
 #user=
 #group=

 # If you want dnsmasq to listen for requests only on specified interfaces
 # (and the loopback) give the name of the interface (eg eth0) here.
 # Repeat the line for more than one interface.
 #interface=
 # Or you can specify which interface _not_ to listen on
 #except-interface=
 # Or which to listen on by address (remember to include 127.0.0.1 if
 # you use this.)
 #listen-address=

 # On systems which support it, dnsmasq binds the wildcard address,
 # even when it is listening on only some interfaces. It then discards
 # requests that it shouldn't reply to. This has the advantage of
 # working even when interfaces come and go and change address. If you
 # want dnsmasq to really bind only the interfaces it is listening on,
 # uncomment this option. About the only time you may need this is when
 # running another nameserver on the same machine.
 #bind-interfaces

 # If you don't want dnsmasq to read /etc/hosts, uncomment the
 # following line.
 #no-hosts
 # or if you want it to read another file, as well as /etc/hosts, use
 # this.
 #addn-hosts=/etc/banner_add_hosts

 # Set this (and domain: see below) if you want to have a domain
 # automatically added to simple names in a hosts-file.
 #expand-hosts

 # Set the domain for dnsmasq. this is optional, but if it is set, it
 # does the following things.
 # 1) Allows DHCP hosts to have fully qualified domain names, as long
 #     as the domain part matches this setting.
 # 2) Sets the "domain" DHCP option thereby potentially setting the
 #    domain of all systems configured by DHCP
 # 3) Provides the domain part for "expand-hosts"
 #domain=thekelleys.org.uk

 # Uncomment this to enable the integrated DHCP server, you need
 # to supply the range of addresses available for lease and optionally
 # a lease time. If you have more than one network, you will need to
 # repeat this for each network on which you want to supply DHCP
 # service.
 #dhcp-range=192.168.0.50,192.168.0.150,12h

 # This is an example of a DHCP range where the netmask is given. This
 # is needed for networks we reach the dnsmasq DHCP server via a relay
 # agent. If you don't know what a DHCP relay agent is, you probably
 # don't need to worry about this.
 #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h

 # This is an example of a DHCP range with a network-id, so that
 # some DHCP options may be set only for this network.
 #dhcp-range=red,192.168.0.50,192.168.0.150

 # Supply parameters for specified hosts using DHCP. There are lots
 # of valid alternatives, so we will give examples of each. Note that
 # IP addresses DO NOT have to be in the range given above, they just
 # need to be on the same network. The order of the parameters in these
 # do not matter, it's permissble to give name,adddress and MAC in any order

 # Always allocate the host with ethernet address 11:22:33:44:55:66
 # The IP address 192.168.0.60
 #dhcp-host=11:22:33:44:55:66,192.168.0.60

 # Always set the name of the host with hardware address
 # 11:22:33:44:55:66 to be "fred"
 #dhcp-host=11:22:33:44:55:66,fred

 # Always give the host with ethernet address 11:22:33:44:55:66
 # the name fred and IP address 192.168.0.60 and lease time 45 minutes
 #dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m

 # Give the machine which says it's name is "bert" IP address
 # 192.168.0.70 and an infinite lease
 #dhcp-host=bert,192.168.0.70,infinite

 # Always give the host with client identifier 01:02:02:04
 # the IP address 192.168.0.60
 #dhcp-host=id:01:02:02:04,192.168.0.60

 # Always give the host with client identifier "marjorie"
 # the IP address 192.168.0.60
 #dhcp-host=id:marjorie,192.168.0.60

 # Enable the address given for "judge" in /etc/hosts
 # to be given to a machine presenting the name "judge" when
 # it asks for a DHCP lease.
 #dhcp-host=judge

 # If this line is uncommented, dnsmasq will read /etc/ethers and act
 # on the ethernet-address/IP pairs found there just as if they had
 # been given as --dhcp-host options. Useful if you keep
 # MAC-address/host mappings there for other purposes.
 #read-ethers

 # Send options to hosts which ask for a DHCP lease.
 # See RFC 2132 for details of available options.
 # Note that all the common settings, such as netmask and
 # broadcast address, DNS server and default route, are given
 # sane defaults by dnsmasq. You very likely will not need any
 # any dhcp-options. If you use Windows clients and Samba, there
 # are some options which are recommended, they are detailed at the
 # end of this section.
 # For reference, the common options are:
 # subnet mask - 1
 # default router - 3
 # DNS server - 6
 # broadcast address - 28

 # Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
 #dhcp-option=42,192.168.0.4,10.10.0.5

 # Set the NTP time server address to be the same machine as
 # is running dnsmasq
 #dhcp-option=42,0.0.0.0

 # Set the NIS domain name to "welly"
 #dhcp-option=40,welly

 # Set the default time-to-live to 50
 #dhcp-option=23,50

 # Set the "all subnets are local" flag
 #dhcp-option=27,1

 # Specify an option which will only be sent to the "red" network
 # (see dhcp-range for the declaration of the "red" network)
 #dhcp-option=red,42,192.168.1.1

 # The following DHCP options set up dnsmasq in the same way as is specified
 # for the ISC dhcpcd in
 # http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
 # adapted for a typical dnsmasq installation where the host running
 # dnsmasq is also the host running samba.
 # you may want to uncomment them if you use Windows clients and Samba.
 #dhcp-option=19,0           # option ip-forwarding off
 #dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
 #dhcp-option=45,0.0.0.0     # netbios datagram distribution server
 #dhcp-option=46,8           # netbios node type
 #dhcp-option=47             # empty netbios scope.


 # Set the boot filename and tftpd server name and address
 # for BOOTP. You will only need this is you want to
 # boot machines over the network.
 #dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3

 # Set the limit on DHCP leases, the default is 150
 #dhcp-lease-max=150

 # The DHCP server needs somewhere on disk to keep its lease database.
 # This defaults to a sane location, but if you want to change it, use
 # the line below.
 #dhcp-leasefile=/var/lib/misc/dnsmasq.leases

 # Set the cachesize here.
 #cache-size=150

 # If you want to disable negative caching, uncomment this.
 #no-negcache

 # Normally responses which come form /etc/hosts and the DHCP lease
 # file have Time-To-Live set as zero, which conventionally means
 # do not cache further. If you are happy to trade lower load on the
 # server for potentially stale date, you can set a time-to-live (in
 # seconds) here.
 #local-ttl=

 # If you want dnsmasq to detect attempts by Verisign to send queries
 # to unregistered .com and .net hosts to its sitefinder service and
 # have dnsmasq instead return the correct NXDOMAIN response, uncomment
 # this line. You can add similar lines to do the same for other
 # registries which have implemented wildcard A records.
 #bogus-nxdomain=64.94.110.11

 # If you want to fix up DNS results from upstream servers, use the
 # alias option. This only works for IPv4.
 # This alias makes a result of 1.2.3.4 appear as 5.6.7.8
 #alias=1.2.3.4,5.6.7.8
 # and this maps 1.2.3.x to 5.6.7.x
 #alias=1.2.3.0,5.6.7.0,255.255.255.0


 # For debugging purposes, log each DNS query as it passes through
 # dnsmasq.
 #log-queries
	# Configuration file for dnsmasq.
	#
	# Format is one option per line, legal options are the same
	# as the long options legal on the command line. See
	# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.

	# Change these lines if you want dnsmasq to serve MX records.
	# Only one of mx-host and mx-target need be set, the other defaults
	# to the name of the host running dnsmasq.
	#mx-host=
	#mx-target=
	#selfmx
	#localmx

	# The following three options make you a better netizen, since they
	# tell dnsmasq to filter out queries which the public DNS cannot
	# answer, and which load the servers (especially the root servers)
	# uneccessarily. If you have a dial-on-demand link they also stop
	# these requests from bringing up the link uneccessarily.

	# Never forward plain names (with a dot or domain part)
	domain-needed
	# Reply to reverse queries for addresses in the non-routed address
	# space with the dotted.quad address
	bogus-priv
	# Filter useless windows-originated DNS requests
	filterwin2k


	# Change this line if you want dns to get its upstream servers from
	# somewhere other that /etc/resolv.conf
	#resolv-file=

	# By default, dnsmasq will send queries to any of the upstream
	# servers it knows about and tries to favour servers to are known
	# to be up. Uncommenting this forces dnsmasq to try each query
	# with each server strictly in the order they appear in
	# /etc/resolv.conf
	#strict-order

	# If you don't want dnsmasq to read /etc/resolv.conf or any other
	# file, getting its servers for this file instead (see below), then
	# uncomment this
	#no-resolv

	# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
	# files for changes and re-read them then uncomment this.
	#no-poll

	# Add other name servers here, with domain specs if they are for
	# non-public domains.
	#server=/localnet/192.168.0.1

	# Add local-only domains here, queries in these domains are answered
	# from /etc/hosts or DHCP only.
	#local=/localnet/

	# Add domains which you want to force to an IP address here.
	# The example below send any host in doubleclick.net to a local
	# webserver.
	#address=/doubleclick.net/127.0.0.1

	# You no longer (as of version 1.7) need to set these to enable
	# dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
	# "dip" group to achieve this.
	#user=
	#group=

	# If you want dnsmasq to listen for requests only on specified interfaces
	# (and the loopback) give the name of the interface (eg eth0) here.
	# Repeat the line for more than one interface.
	#interface=
	# Or you can specify which interface _not_ to listen on
	#except-interface=
	# Or which to listen on by address (remember to include 127.0.0.1 if
	# you use this.)
	#listen-address=

	# On systems which support it, dnsmasq binds the wildcard address,
	# even when it is listening on only some interfaces. It then discards
	# requests that it shouldn't reply to. This has the advantage of
	# working even when interfaces come and go and change address. If you
	# want dnsmasq to really bind only the interfaces it is listening on,
	# uncomment this option. About the only time you may need this is when
	# running another nameserver on the same machine.
	#bind-interfaces

	# If you don't want dnsmasq to read /etc/hosts, uncomment the
	# following line.
	#no-hosts
	# or if you want it to read another file, as well as /etc/hosts, use
	# this.
	#addn-hosts=/etc/banner_add_hosts

	# Set this (and domain: see below) if you want to have a domain
	# automatically added to simple names in a hosts-file.
	#expand-hosts

	# Set the domain for dnsmasq. this is optional, but if it is set, it
	# does the following things.
	# 1) Allows DHCP hosts to have fully qualified domain names, as long
	# as the domain part matches this setting.
	# 2) Sets the "domain" DHCP option thereby potentially setting the
	# domain of all systems configured by DHCP
	# 3) Provides the domain part for "expand-hosts"
	#domain=thekelleys.org.uk

	# Uncomment this to enable the integrated DHCP server, you need
	# to supply the range of addresses available for lease and optionally
	# a lease time. If you have more than one network, you will need to
	# repeat this for each network on which you want to supply DHCP
	# service.
	#dhcp-range=192.168.0.50,192.168.0.150,12h

	# This is an example of a DHCP range where the netmask is given. This
	# is needed for networks we reach the dnsmasq DHCP server via a relay
	# agent. If you don't know what a DHCP relay agent is, you probably
	# don't need to worry about this.
	#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h

	# This is an example of a DHCP range with a network-id, so that
	# some DHCP options may be set only for this network.
	#dhcp-range=red,192.168.0.50,192.168.0.150

	# Supply parameters for specified hosts using DHCP. There are lots
	# of valid alternatives, so we will give examples of each. Note that
	# IP addresses DO NOT have to be in the range given above, they just
	# need to be on the same network. The order of the parameters in these
	# do not matter, it's permissble to give name,adddress and MAC in any order

	# Always allocate the host with ethernet address 11:22:33:44:55:66
	# The IP address 192.168.0.60
	#dhcp-host=11:22:33:44:55:66,192.168.0.60

	# Always set the name of the host with hardware address
	# 11:22:33:44:55:66 to be "fred"
	#dhcp-host=11:22:33:44:55:66,fred

	# Always give the host with ethernet address 11:22:33:44:55:66
	# the name fred and IP address 192.168.0.60 and lease time 45 minutes
	#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m

	# Give the machine which says it's name is "bert" IP address
	# 192.168.0.70 and an infinite lease
	#dhcp-host=bert,192.168.0.70,infinite

	# Always give the host with client identifier 01:02:02:04
	# the IP address 192.168.0.60
	#dhcp-host=id:01:02:02:04,192.168.0.60

	# Always give the host with client identifier "marjorie"
	# the IP address 192.168.0.60
	#dhcp-host=id:marjorie,192.168.0.60

	# Enable the address given for "judge" in /etc/hosts
	# to be given to a machine presenting the name "judge" when
	# it asks for a DHCP lease.
	#dhcp-host=judge

	# If this line is uncommented, dnsmasq will read /etc/ethers and act
	# on the ethernet-address/IP pairs found there just as if they had
	# been given as --dhcp-host options. Useful if you keep
	# MAC-address/host mappings there for other purposes.
	#read-ethers

	# Send options to hosts which ask for a DHCP lease.
	# See RFC 2132 for details of available options.
	# Note that all the common settings, such as netmask and
	# broadcast address, DNS server and default route, are given
	# sane defaults by dnsmasq. You very likely will not need any
	# any dhcp-options. If you use Windows clients and Samba, there
	# are some options which are recommended, they are detailed at the
	# end of this section.
	# For reference, the common options are:
	# subnet mask - 1
	# default router - 3
	# DNS server - 6
	# broadcast address - 28

	# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
	#dhcp-option=42,192.168.0.4,10.10.0.5

	# Set the NTP time server address to be the same machine as
	# is running dnsmasq
	#dhcp-option=42,0.0.0.0

	# Set the NIS domain name to "welly"
	#dhcp-option=40,welly

	# Set the default time-to-live to 50
	#dhcp-option=23,50

	# Set the "all subnets are local" flag
	#dhcp-option=27,1

	# Specify an option which will only be sent to the "red" network
	# (see dhcp-range for the declaration of the "red" network)
	#dhcp-option=red,42,192.168.1.1

	# The following DHCP options set up dnsmasq in the same way as is specified
	# for the ISC dhcpcd in
	# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
	# adapted for a typical dnsmasq installation where the host running
	# dnsmasq is also the host running samba.
	# you may want to uncomment them if you use Windows clients and Samba.
	#dhcp-option=19,0 # option ip-forwarding off
	#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
	#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
	#dhcp-option=46,8 # netbios node type
	#dhcp-option=47 # empty netbios scope.


	# Set the boot filename and tftpd server name and address
	# for BOOTP. You will only need this is you want to
	# boot machines over the network.
	#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3

	# Set the limit on DHCP leases, the default is 150
	#dhcp-lease-max=150

	# The DHCP server needs somewhere on disk to keep its lease database.
	# This defaults to a sane location, but if you want to change it, use
	# the line below.
	#dhcp-leasefile=/var/lib/misc/dnsmasq.leases

	# Set the cachesize here.
	#cache-size=150

	# If you want to disable negative caching, uncomment this.
	#no-negcache

	# Normally responses which come form /etc/hosts and the DHCP lease
	# file have Time-To-Live set as zero, which conventionally means
	# do not cache further. If you are happy to trade lower load on the
	# server for potentially stale date, you can set a time-to-live (in
	# seconds) here.
	#local-ttl=

	# If you want dnsmasq to detect attempts by Verisign to send queries
	# to unregistered .com and .net hosts to its sitefinder service and
	# have dnsmasq instead return the correct NXDOMAIN response, uncomment
	# this line. You can add similar lines to do the same for other
	# registries which have implemented wildcard A records.
	#bogus-nxdomain=64.94.110.11

	# If you want to fix up DNS results from upstream servers, use the
	# alias option. This only works for IPv4.
	# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
	#alias=1.2.3.4,5.6.7.8
	# and this maps 1.2.3.x to 5.6.7.x
	#alias=1.2.3.0,5.6.7.0,255.255.255.0



	# For debugging purposes, log each DNS query as it passes through
	# dnsmasq.
	#log-queries