dnsmasq.conf.example - thekelleys/dnsmasq - Gitiles

 # Configuration file for dnsmasq.
 #
 # Format is one option per line, legal options are the same
 # as the long options legal on the command line. See
 # "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.

 # Change these lines if you want dnsmasq to serve MX records.
 # Only one of mx-host and mx-target need be set, the other defaults
 # to the name of the host  running dnsmasq.
 #mx-host=
 #mx-target=
 #selfmx
 #localmx

 # The following three options make you a better netizen, since they
 # tell dnsmasq to filter out queries which the public DNS cannot
 # answer, and which load the servers (especially the root servers)
 # uneccessarily. If you have a dial-on-demand link they also stop
 # these requests from bringing up the link uneccessarily.

 # Never forward plain names (with a dot or domain part)
 domain-needed
 # Reply to reverse queries for addresses in the non-routed address
 # space with the dotted.quad address
 bogus-priv
 # Filter useless windows-originated DNS requests
 filterwin2k


 # Change this line if you want dns to get its upstream servers from
 # somewhere other that /etc/resolv.conf
 #resolv-file=

 # If you don't want dnsmasq to read /etc/resolv.conf or any other
 # file, getting its servers for this file instead (see below), then
 # uncomment this
 #no-resolv

 # If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
 # files for changes and re-read them then uncomment this.
 #no-poll

 # Add other name servers here, with domain specs if they are for
 # non-public domains.
 #server=/localnet/192.168.0.1

 # Add local-only domains here, queries in these domains are answered
 # from /etc/hosts or DHCP only.
 #local=/localnet/

 # Add domains which you want to force to an IP address here.
 # The example below send any host in doubleclick.net to a local
 # webserver.
 #address=/doubleclick.net/127.0.0.1

 # You no longer (as of version 1.7) need to set these to enable
 # dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
 # "dip" group to achieve this.
 #user=
 #group=

 # If you want dnsmasq to listen for requests only on specified interfaces
 # (and the loopback) give the name of the interface (eg eth0) here.
 # Repeat the line for more than one interface.
 #interface=
 # Or you can specify which interface _not_ to listen on
 #except-interface=
 # Or which to listen on by address (remember to include 127.0.0.1 if
 # you use this.)
 #listen-address=

 # If you don't want dnsmasq to read /etc/hosts, uncomment the
 # following line.
 #no-hosts
 # or if you want it to read another file, as well as /etc/hosts, use
 # this.
 #addn-hosts=/etc/banner_add_hosts

 # Set this (and domain: see below) if you want to have a domain
 # automatically added to simple names in a hosts-file.
 #expand-hosts

 # Uncomment this to enable the integrated DHCP server, you need
 # to supply the range of addresses available for lease and optionally
 # a lease time. If you have more than one interface, you will need to
 # repeat this for each interface on which you want to supply DHCP
 # service.
 #dhcp-range=192.168.0.50,192.168.0.150,12h

 # Supply parameters for specified hosts using DHCP. There are lots
 # of valid alternatives, do we will give examples of each. Note that
 # IP addresses DO NOT have to be in the range given above, they just
 # need to be on the same network.

 # Always allocate the host with ethernet address 11:22:33:44:55:66
 # The IP address 192.168.0.60
 #dhcp-host=11:22:33:44:55:66,192.168.0.60

 # Always set the name of the host with hardware address
 # 11:22:33:44:55:66 to be "fred"
 #dhcp-host=11:22:33:44:55:66,fred

 # Always give the host with ethernet address 11:22:33:44:55:66
 # the name fred and IP address 192.168.0.60 and lease time 45 minutes
 #dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m

 # Give the machine which says it's name is "bert" IP address
 # 192.168.0.70 and an infinite lease
 #dhcp-host=bert,192.168.0.70,infinite

 # Always give the host with client identifier 01:02:02:04
 # the IP address 192.168.0.60
 #dhcp-host=id:01:02:02:04,192.168.0.60

 # Always give the host with client identifier "marjorie"
 # the IP address 192.168.0.60
 #dhcp-host=id:marjorie,192.168.0.60

 # Send options to hosts which ask for a DHCP lease.
 # See RFC 2132 for details of available options.

 # Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
 #dhcp-option=42,192.168.0.4,10.10.0.5

 # Set the NIS domain name to "welly"
 #dhcp-option=40,welly

 # Set the boot filename and tftpd server name and address
 # for BOOTP. You will only need this is you want to
 # boot machines over the network.
 #dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3

 # The DHCP server needs somewhere on disk to keep its lease database.
 # This defaults to a sane location, but if you want to change it, use
 # the line below.
 #dhcp-leasefile=/var/lib/dnsmasq/leases

 # Override the default route (which is normally automagically set
 # to be the machine running dnsmasq
 #dhcp-option=2,192,168.4.4

 # Set the cachesize here.
 #cache-size=600

 # If you want to disable negative caching, uncomment this.
 #no-negcache

 # Normally responses which come form /etc/hosts and the DHCP lease
 # file have Time-To-Live set as zero, which conventionally means
 # do not cache further. If you are happy to trade lower load on the
 # server for potentially stale date, you can set a time-to-live (in
 # seconds) here.
 #local-ttl=

 # If you want dnsmasq to detect attempts by Verisign to send queries
 # to unregistered .com and .net hosts to its sitefinder service and
 # have dnsmasq instead return the correct NXDOMAIN response, uncomment
 # this line. You can add similar lines to do the same for other
 # registries which have implemented wildcard A records.
 #bogus-nxdomain=64.94.110.11

 # For debugging purposes, log each DNS query as it passes through
 # dnsmasq.
 #log-queries
	# Configuration file for dnsmasq.
	#
	# Format is one option per line, legal options are the same
	# as the long options legal on the command line. See
	# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.

	# Change these lines if you want dnsmasq to serve MX records.
	# Only one of mx-host and mx-target need be set, the other defaults
	# to the name of the host running dnsmasq.
	#mx-host=
	#mx-target=
	#selfmx
	#localmx

	# The following three options make you a better netizen, since they
	# tell dnsmasq to filter out queries which the public DNS cannot
	# answer, and which load the servers (especially the root servers)
	# uneccessarily. If you have a dial-on-demand link they also stop
	# these requests from bringing up the link uneccessarily.

	# Never forward plain names (with a dot or domain part)
	domain-needed
	# Reply to reverse queries for addresses in the non-routed address
	# space with the dotted.quad address
	bogus-priv
	# Filter useless windows-originated DNS requests
	filterwin2k


	# Change this line if you want dns to get its upstream servers from
	# somewhere other that /etc/resolv.conf
	#resolv-file=

	# If you don't want dnsmasq to read /etc/resolv.conf or any other
	# file, getting its servers for this file instead (see below), then
	# uncomment this
	#no-resolv

	# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
	# files for changes and re-read them then uncomment this.
	#no-poll

	# Add other name servers here, with domain specs if they are for
	# non-public domains.
	#server=/localnet/192.168.0.1

	# Add local-only domains here, queries in these domains are answered
	# from /etc/hosts or DHCP only.
	#local=/localnet/

	# Add domains which you want to force to an IP address here.
	# The example below send any host in doubleclick.net to a local
	# webserver.
	#address=/doubleclick.net/127.0.0.1

	# You no longer (as of version 1.7) need to set these to enable
	# dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
	# "dip" group to achieve this.
	#user=
	#group=

	# If you want dnsmasq to listen for requests only on specified interfaces
	# (and the loopback) give the name of the interface (eg eth0) here.
	# Repeat the line for more than one interface.
	#interface=
	# Or you can specify which interface _not_ to listen on
	#except-interface=
	# Or which to listen on by address (remember to include 127.0.0.1 if
	# you use this.)
	#listen-address=

	# If you don't want dnsmasq to read /etc/hosts, uncomment the
	# following line.
	#no-hosts
	# or if you want it to read another file, as well as /etc/hosts, use
	# this.
	#addn-hosts=/etc/banner_add_hosts

	# Set this (and domain: see below) if you want to have a domain
	# automatically added to simple names in a hosts-file.
	#expand-hosts

	# Uncomment this to enable the integrated DHCP server, you need
	# to supply the range of addresses available for lease and optionally
	# a lease time. If you have more than one interface, you will need to
	# repeat this for each interface on which you want to supply DHCP
	# service.
	#dhcp-range=192.168.0.50,192.168.0.150,12h

	# Supply parameters for specified hosts using DHCP. There are lots
	# of valid alternatives, do we will give examples of each. Note that
	# IP addresses DO NOT have to be in the range given above, they just
	# need to be on the same network.

	# Always allocate the host with ethernet address 11:22:33:44:55:66
	# The IP address 192.168.0.60
	#dhcp-host=11:22:33:44:55:66,192.168.0.60

	# Always set the name of the host with hardware address
	# 11:22:33:44:55:66 to be "fred"
	#dhcp-host=11:22:33:44:55:66,fred

	# Always give the host with ethernet address 11:22:33:44:55:66
	# the name fred and IP address 192.168.0.60 and lease time 45 minutes
	#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m

	# Give the machine which says it's name is "bert" IP address
	# 192.168.0.70 and an infinite lease
	#dhcp-host=bert,192.168.0.70,infinite

	# Always give the host with client identifier 01:02:02:04
	# the IP address 192.168.0.60
	#dhcp-host=id:01:02:02:04,192.168.0.60

	# Always give the host with client identifier "marjorie"
	# the IP address 192.168.0.60
	#dhcp-host=id:marjorie,192.168.0.60

	# Send options to hosts which ask for a DHCP lease.
	# See RFC 2132 for details of available options.

	# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
	#dhcp-option=42,192.168.0.4,10.10.0.5

	# Set the NIS domain name to "welly"
	#dhcp-option=40,welly

	# Set the boot filename and tftpd server name and address
	# for BOOTP. You will only need this is you want to
	# boot machines over the network.
	#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3

	# The DHCP server needs somewhere on disk to keep its lease database.
	# This defaults to a sane location, but if you want to change it, use
	# the line below.
	#dhcp-leasefile=/var/lib/dnsmasq/leases

	# Override the default route (which is normally automagically set
	# to be the machine running dnsmasq
	#dhcp-option=2,192,168.4.4

	# Set the cachesize here.
	#cache-size=600

	# If you want to disable negative caching, uncomment this.
	#no-negcache

	# Normally responses which come form /etc/hosts and the DHCP lease
	# file have Time-To-Live set as zero, which conventionally means
	# do not cache further. If you are happy to trade lower load on the
	# server for potentially stale date, you can set a time-to-live (in
	# seconds) here.
	#local-ttl=

	# If you want dnsmasq to detect attempts by Verisign to send queries
	# to unregistered .com and .net hosts to its sitefinder service and
	# have dnsmasq instead return the correct NXDOMAIN response, uncomment
	# this line. You can add similar lines to do the same for other
	# registries which have implemented wildcard A records.
	#bogus-nxdomain=64.94.110.11

	# For debugging purposes, log each DNS query as it passes through
	# dnsmasq.
	#log-queries