Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1 | commit 2d78074d2e806edc380c1464eb9e5df335ece65e |
| 2 | Author: Stefan Roese <sr@denx.de> |
| 3 | Date: Fri Jun 22 17:32:28 2007 +0200 |
| 4 | |
| 5 | ppc7xx: Update CPCI750 board |
| 6 | |
| 7 | This small CPCI750 update extends the board specific command |
| 8 | "show_config" to display the Marvell strapping registers and |
| 9 | extends the PCI IDE controller. |
| 10 | |
| 11 | Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| 12 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 13 | |
| 14 | commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 |
| 15 | Author: Jon Loeliger <jdl@freescale.com> |
| 16 | Date: Wed Aug 15 11:55:35 2007 -0500 |
| 17 | |
| 18 | 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| 19 | |
| 20 | Remove a leftover in net/tftp.c while we're at it. |
| 21 | |
| 22 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 23 | |
| 24 | commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 |
| 25 | Author: Jon Loeliger <jdl@freescale.com> |
| 26 | Date: Wed Aug 15 12:20:40 2007 -0500 |
| 27 | |
| 28 | Move the MPC8641HPCN board under board/freescale. |
| 29 | |
| 30 | Minor path corrections needed to ensure buildability. |
| 31 | |
| 32 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 33 | |
| 34 | commit 8662577fe36fdb6a44b55b998d9daac6392a736a |
| 35 | Author: Jon Loeliger <jdl@freescale.com> |
| 36 | Date: Wed Aug 15 11:46:22 2007 -0500 |
| 37 | |
| 38 | 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| 39 | |
| 40 | Remove a leftover in net/tftp.c while we're at it. |
| 41 | |
| 42 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 43 | |
| 44 | commit 210f463c71917b7a4495c2103c228b9c179ae64d |
| 45 | Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| 46 | Date: Wed Aug 15 11:13:15 2007 -0400 |
| 47 | |
| 48 | Fix where the #ifdef CFG_BOOTMAPSZ is placed. |
| 49 | |
| 50 | Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb |
| 51 | interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) |
| 52 | when it should have gone inside of the conditional. As a result, it |
| 53 | broke non-LIBFDT board builds. |
| 54 | |
| 55 | Also added a missing "not." to the comment. |
| 56 | |
| 57 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 58 | |
| 59 | commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 |
| 60 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 61 | Date: Tue Aug 14 14:06:45 2007 -0500 |
| 62 | |
| 63 | Fix malloc size error in ahci_init_one. |
| 64 | |
| 65 | Typically this causes scsi init to corrupt the |
| 66 | devlist and break the coninfo command. |
| 67 | Fix a compiler size warning. |
| 68 | |
| 69 | Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| 70 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 71 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 72 | |
| 73 | commit b361acd64fd2525c081b9b288b0804efe209c0e9 |
| 74 | Author: ksi@koi8.net <ksi@koi8.net> |
| 75 | Date: Tue Aug 14 10:02:16 2007 -0700 |
| 76 | |
| 77 | TI DaVinci - fix unsupported %hhx format |
| 78 | |
| 79 | Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| 80 | |
| 81 | commit f01dbb5424a81453c81190dd30e945891466f621 |
| 82 | Author: Wolfgang Denk <wd@denx.de> |
| 83 | Date: Tue Aug 14 18:42:36 2007 +0200 |
| 84 | |
| 85 | Coding style cleanup. Update CHANGELOG. |
| 86 | |
| 87 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 88 | |
Wolfgang Denk | f01dbb5 | 2007-08-14 18:42:36 +0200 | [diff] [blame] | 89 | commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 |
| 90 | Author: Andy Fleming <afleming@freescale.com> |
| 91 | Date: Tue Aug 14 10:32:59 2007 -0500 |
| 92 | |
| 93 | Fix initrd/dtb interaction |
| 94 | |
| 95 | The original code would wrongly relocate the blob to be right before |
| 96 | the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ, |
| 97 | if it is defined. So we make two changes: |
| 98 | |
| 99 | 1) flag the blob for relocation whenever its address is above BOOTMAPSZ |
| 100 | |
| 101 | 2) If the blob is being relocated, relocate it before kbd, not initrd |
| 102 | |
| 103 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 104 | |
| 105 | commit e54b970173769307a116bd34028b6d0c2eea2a4e |
| 106 | Author: Peter Pearse <peter.pearse@arm.com> |
| 107 | Date: Tue Aug 14 15:40:00 2007 +0100 |
| 108 | |
| 109 | Supply spi interface in at45.c |
| 110 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 111 | commit 4ce846ec59f36b85d6644a769690ad3feb667575 |
| 112 | Author: Stefan Roese <sr@denx.de> |
| 113 | Date: Tue Aug 14 15:12:01 2007 +0200 |
| 114 | |
| 115 | POST: Fix merge problem |
| 116 | |
| 117 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 118 | |
| 119 | commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c |
| 120 | Author: Stefan Roese <sr@denx.de> |
| 121 | Date: Tue Aug 14 15:03:17 2007 +0200 |
| 122 | |
| 123 | Coding style cleanup |
| 124 | |
| 125 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 126 | |
| 127 | commit 779e975117a75e91fcebe226a63104dbfb924ab1 |
| 128 | Author: Stefan Roese <sr@denx.de> |
| 129 | Date: Tue Aug 14 14:44:41 2007 +0200 |
| 130 | |
| 131 | ppc4xx: Add initial Zeus (PPC405EP) board support |
| 132 | |
| 133 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 134 | |
| 135 | commit c5a172a5fd636c12467429e3f7910e53773979c6 |
| 136 | Author: Stefan Roese <sr@denx.de> |
| 137 | Date: Tue Aug 14 14:41:55 2007 +0200 |
| 138 | |
| 139 | POST: Add option for external ethernet loopback test |
| 140 | |
| 141 | When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST |
| 142 | is not done using an internal loopback connection, but by assuming |
| 143 | that an external loopback connector is plugged into the board. |
| 144 | |
| 145 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 146 | |
| 147 | commit eb2b4010ae426245172988804ee8d9193fb41038 |
| 148 | Author: Stefan Roese <sr@denx.de> |
| 149 | Date: Tue Aug 14 14:39:44 2007 +0200 |
| 150 | |
| 151 | POST: Add ppc405 support to cache and UART POST |
| 152 | |
| 153 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 154 | |
Wolfgang Denk | f01dbb5 | 2007-08-14 18:42:36 +0200 | [diff] [blame] | 155 | commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c |
| 156 | Author: Peter Pearse <peter.pearse@arm.com> |
| 157 | Date: Tue Aug 14 10:46:32 2007 +0100 |
| 158 | |
| 159 | Replace lost end of at45.c. |
| 160 | |
| 161 | commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2 |
| 162 | Author: Peter Pearse <peter.pearse@arm.com> |
| 163 | Date: Tue Aug 14 10:30:06 2007 +0100 |
| 164 | |
| 165 | Update Makefiles for merged and split at45.c. |
| 166 | |
| 167 | commit 3454cece2db57cb9eb7087995f7e73066a163f71 |
| 168 | Author: Peter Pearse <peter.pearse@arm.com> |
| 169 | Date: Tue Aug 14 10:21:06 2007 +0100 |
| 170 | |
| 171 | Delete the merged files. |
| 172 | |
| 173 | commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225 |
| 174 | Author: Peter Pearse <peter.pearse@arm.com> |
| 175 | Date: Tue Aug 14 10:14:05 2007 +0100 |
| 176 | |
| 177 | Add the files. |
| 178 | |
| 179 | commit d4fc6012fd0a5c211b825691f44b06f8032c0551 |
| 180 | Author: Peter Pearse <peter.pearse@arm.com> |
| 181 | Date: Tue Aug 14 10:10:52 2007 +0100 |
| 182 | |
| 183 | Add MACH_TYPE records for several AT91 boards. |
| 184 | Merge to two at45.c files into a common file, split to at45.c and spi.c |
| 185 | Fix spelling error in DM9161 PHY Support. |
| 186 | Initialize at91rm9200 board (and set LED). |
| 187 | Add PIO control for at91rm9200dk LEDs and Mux. |
| 188 | Change dataflash partition boundaries to be compatible with Linux 2.6. |
| 189 | |
| 190 | Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| 191 | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| 192 | |
| 193 | commit 4ef35e53c693556c54b0c22d6f873de87bade253 |
| 194 | Author: Wolfgang Denk <wd@denx.de> |
| 195 | Date: Tue Aug 14 09:54:46 2007 +0200 |
| 196 | |
| 197 | Coding style cleanup, update CHANGELOG |
| 198 | |
| 199 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 200 | |
Wolfgang Denk | 4ef35e5 | 2007-08-14 09:54:46 +0200 | [diff] [blame] | 201 | commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7 |
| 202 | Author: Wolfgang Denk <wd@denx.de> |
| 203 | Date: Tue Aug 14 09:47:27 2007 +0200 |
| 204 | |
| 205 | Coding style cleanup; rebuild CHANGELOG |
| 206 | |
| 207 | commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a |
| 208 | Author: Randy Vinson <rvinson@linuxbox.(none)> |
| 209 | Date: Tue Feb 27 19:42:22 2007 -0700 |
| 210 | |
| 211 | 85xxCDS: Add make targets for legacy systems. |
| 212 | |
| 213 | The PCI ID select values on the Arcadia main board differ depending |
| 214 | on the version of the hardware. The standard configuration supports |
| 215 | Rev 3.1. The legacy target supports Rev 2.x. |
| 216 | |
| 217 | Signed-off-by Randy Vinson <rvinson@mvista.com> |
| 218 | |
| 219 | commit e41094c7e38177c755fbd9b182018069614f080d |
| 220 | Author: Andy Fleming <afleming@freescale.com> |
| 221 | Date: Tue Aug 14 01:50:09 2007 -0500 |
| 222 | |
| 223 | 85xxCDS: Enable the VIA PCI-to-ISA bridge. |
| 224 | |
| 225 | Author: Randy Vinson <rvinson@linuxbox.(none)> |
| 226 | |
| 227 | Enable the PCI-to-ISA bridge in the VIA Southbridge located on the |
| 228 | Arcadia main board. |
| 229 | |
| 230 | Signed-off-by: Randy Vinson <rvinson@mvista.com> |
| 231 | Signed-off-by: York Sun <yorksun@freescale.com> |
| 232 | |
| 233 | commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 |
| 234 | Author: Andy Fleming <afleming@freescale.com> |
| 235 | Date: Tue Aug 14 00:14:25 2007 -0500 |
| 236 | |
| 237 | Add support for UEC to 8568 |
| 238 | |
| 239 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 240 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 241 | |
| 242 | commit c59e4091ffe0148398b9e9ff14a019ea038b7432 |
| 243 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
| 244 | Date: Tue Jun 19 14:18:34 2007 -0400 |
| 245 | |
| 246 | Add PCI support for MPC8568MDS board |
| 247 | |
| 248 | This patch is against u-boot-mpc85xx.git of www.denx.com |
| 249 | |
| 250 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 251 | Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> |
| 252 | |
| 253 | commit d111d6382c99fdea08c2312eeeae8786945e189a |
| 254 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
| 255 | Date: Tue Jun 19 14:18:32 2007 -0400 |
| 256 | |
| 257 | Empirically set cpo and clk_adjust for mpc85xx DDR2 support |
| 258 | |
| 259 | This patch is against u-boot-mpc85xx.git of www.denx.com |
| 260 | |
| 261 | Setting cpo to 0x9 for frequencies higher than 333MHz is verified on |
| 262 | both MPC8548CDS board and MPC8568MDS board, especially for supporting |
| 263 | 533MHz DDR2. |
| 264 | |
| 265 | Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for |
| 266 | DDR2 on all current board versions especially ver 1.92 or later to bring |
| 267 | up. |
| 268 | |
| 269 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 270 | |
| 271 | commit 3db0bef59eab1155801618cef5c481e97553b597 |
| 272 | Author: Kumar Gala <galak@kernel.crashing.org> |
| 273 | Date: Tue Aug 7 18:07:27 2007 -0500 |
| 274 | |
| 275 | Use an absolute address when jumping out of 4k boot page |
| 276 | |
| 277 | On e500 when we leave the 4k boot page we should use an absolute address since |
| 278 | we don't know where the board code may want us to be really running at. |
| 279 | |
| 280 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 281 | |
| 282 | commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a |
| 283 | Author: Andy Fleming <afleming@freescale.com> |
| 284 | Date: Mon Aug 13 14:49:59 2007 -0500 |
| 285 | |
| 286 | MPC85xx BA bits not set for 3-bit bank address DIMM |
| 287 | |
| 288 | The current implementation does not set the number of bank address bits |
| 289 | (BA) in the processor. The default assumes 2 logical bank bits. This |
| 290 | works fine for a DIMM that uses devices with 4 internal banks (SPD |
| 291 | byte17 = 0x4) but needs to be set appropriately for a DIMM that uses |
| 292 | devices with 8 internal banks (SPD byte17 = 0x8). |
| 293 | |
| 294 | Signed-off-by: Greg Davis <DavisG@embeddedplanet.com> |
| 295 | |
| 296 | commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 |
| 297 | Author: Andy Fleming <afleming@freescale.com> |
| 298 | Date: Mon Aug 13 14:38:06 2007 -0500 |
| 299 | |
| 300 | Fix minor 85xx warnings |
| 301 | |
| 302 | Some patches had inserted warnings into the build: |
| 303 | * mpc8560ads declared data without using it |
| 304 | * cpu_init declared ecm and immap without using it in all CONFIGs |
| 305 | * MPC8548CDS.h had its default filenames changed so that they contained |
| 306 | "\m" in the paths. Made the defaults not Windows-specific (or |
| 307 | anything-specific) |
| 308 | |
| 309 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 310 | |
| 311 | commit f2cff6b104f82b993bef6086ce0c97159bbe1add |
| 312 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 313 | Date: Fri Jul 27 01:50:52 2007 -0500 |
| 314 | |
| 315 | 8548cds PCIE support. |
| 316 | |
| 317 | Make the early L1 cache stack region guarded to prevent speculative |
| 318 | fetches outside the locked range. |
| 319 | |
| 320 | Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. |
| 321 | init.S whitespace cleanup. |
| 322 | |
| 323 | Allow TEXT_BASE value to be specified on command line. This allows it |
| 324 | to be set to 0xfffc0000 which cuts the uboot binary in half. |
| 325 | |
| 326 | Clear and enable lbc and ecm errors. |
| 327 | |
| 328 | Update last_busno in device-tree for pci and pcie. |
| 329 | |
| 330 | Remove load of obsolete cpu/mpc85xx/pci.0 |
| 331 | |
| 332 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 333 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 334 | |
| 335 | commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 |
| 336 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 337 | Date: Fri Jul 27 01:50:51 2007 -0500 |
| 338 | |
| 339 | 8544ds PCIE support |
| 340 | |
| 341 | PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. |
| 342 | |
| 343 | Enable LBC and ECM errors and clear error registers. |
| 344 | |
| 345 | Add tftpflash env var to get uboot from tftp server and flash it. |
| 346 | |
| 347 | Add pci/pcie convenience env vars to display register space: |
| 348 | "run pcie3regs" to see all pcie3 ccsr registers |
| 349 | "run pcie3cfg" to see all cfg registers |
| 350 | Whitespace cleanup and MPC8544DS.h |
| 351 | |
| 352 | Enable CONFIG_INTERRUPTS. |
| 353 | |
| 354 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 355 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 356 | |
| 357 | commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85 |
| 358 | Author: Andy Fleming <afleming@freescale.com> |
| 359 | Date: Tue Aug 14 01:34:21 2007 -0500 |
| 360 | |
| 361 | 85xx start.S cleanup and exception support |
| 362 | |
| 363 | From: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 364 | |
| 365 | Support external interrupts from platform to eliminate system hangs. |
| 366 | Define CONFIG_INTERRUPTS board configure option to enable. |
| 367 | Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. |
| 368 | |
| 369 | Remove extra cpu initialization redundant with hardware initialization. |
| 370 | Whitespace cleanup. |
| 371 | |
| 372 | Define and use _START_OFFSET consistent with other processors using |
| 373 | ppc_asm.tmpl |
| 374 | |
| 375 | Move additional code from .text to boot page to make room for |
| 376 | exception vectors at start of image. |
| 377 | |
| 378 | Handle Machine Check, External and Critical exceptions. |
| 379 | |
| 380 | Fix e500 machine check error determination in traps.c |
| 381 | |
| 382 | TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. |
| 383 | |
| 384 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 385 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 386 | |
| 387 | commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47 |
| 388 | Author: Andy Fleming <afleming@freescale.com> |
| 389 | Date: Tue Aug 14 01:33:18 2007 -0500 |
| 390 | |
| 391 | Add MPC8544DS README |
| 392 | |
| 393 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 394 | |
| 395 | commit 40c7f9b0de4e300370adfc704128fa0f79a143b6 |
| 396 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 397 | Date: Fri Jul 27 01:50:48 2007 -0500 |
| 398 | |
| 399 | 85xx allow debugger to configure ddr. |
| 400 | |
| 401 | Only check for mpc8548 rev 1 when compiled for 8548. |
| 402 | |
| 403 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 404 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 405 | |
| 406 | commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704 |
| 407 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 408 | Date: Fri Jul 27 01:50:47 2007 -0500 |
| 409 | |
| 410 | mpc85xx L2 cache reporting and SRAM relocation option. |
| 411 | |
| 412 | Allow debugger to override flash cs0/cs1 settings to enable alternate |
| 413 | boot regions |
| 414 | |
| 415 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 416 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 417 | |
| 418 | commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f |
| 419 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 420 | Date: Fri Jul 27 01:50:46 2007 -0500 |
| 421 | |
| 422 | e500 needs ppc_asm.tmp MCK_EXCEPTION |
| 423 | |
| 424 | Always define MCK_EXCEPTION macro - so e500 can use it too. |
| 425 | |
| 426 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 427 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 428 | |
Wolfgang Denk | 85eb5ca | 2007-08-14 09:47:27 +0200 | [diff] [blame] | 429 | commit 53a5c424bf8655b7b4e2c305a441963259a26a81 |
| 430 | Author: David Updegraff <dave@cray.com> |
| 431 | Date: Mon Jun 11 10:41:07 2007 -0500 |
| 432 | |
| 433 | multicast tftp: RFC2090 |
| 434 | |
| 435 | Implemented IETF RFC2090, Multicast TFTP. Initial implementation |
| 436 | on Realtek RTL8139 and Freescale TSEC. |
| 437 | |
| 438 | Signed-off-by: David Updegraff <dave@cray.com> |
| 439 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 440 | |
| 441 | commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1 |
| 442 | Author: Wilson Callan <wcallan@savantav.com> |
| 443 | Date: Sat Jul 28 10:56:13 2007 -0400 |
| 444 | |
| 445 | New CONFIG_BOOTP_SERVERIP option |
| 446 | |
| 447 | Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different |
| 448 | from the bootp server |
| 449 | |
| 450 | Signed-off-by: Wilson Callan <wcallan@savantav.com> |
| 451 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 452 | |
| 453 | commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1 |
| 454 | Author: Mike Rapoport <mike@compulab.co.il> |
| 455 | Date: Sun Aug 12 08:48:27 2007 +0300 |
| 456 | |
| 457 | Add ability to take MAC address from the environment to DM9000 driver |
| 458 | |
| 459 | Signed-off-by: Mike Rapoport <mike@compulab.co.il> |
| 460 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 461 | |
| 462 | commit be5d72d10d47609326226225181e301fb9a33b58 |
| 463 | Author: Wolfgang Denk <wd@denx.de> |
| 464 | Date: Mon Aug 13 21:57:53 2007 +0200 |
| 465 | |
| 466 | Minor coding style cleanup. Update CHANGELOG. |
| 467 | |
| 468 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 469 | |
| 470 | commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05 |
| 471 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 472 | Date: Sat Aug 11 06:54:58 2007 -0500 |
| 473 | |
| 474 | Modify SBC8641D to use new Freescale PCI routines |
| 475 | |
| 476 | PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT |
| 477 | adapter. |
| 478 | |
| 479 | Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 480 | Signde-off-by: Jon Loeliger <jdl@freescale.com> |
| 481 | |
Wolfgang Denk | be5d72d | 2007-08-13 21:57:53 +0200 | [diff] [blame] | 482 | commit a08458303e7f9db67f296980036d3292c35cb45c |
| 483 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 484 | Date: Fri Jun 29 18:38:51 2007 +0200 |
| 485 | |
| 486 | atmel_mci: Fix data timeout value |
| 487 | |
| 488 | Calculate the data timeout based on values from the CSD instead of |
| 489 | just using a hardcoded DTOR value. This is a backport of a similar fix |
| 490 | in BSP 2.0, with one additional fix: the DTOCYC value is rounded up |
| 491 | instead of down. |
| 492 | |
| 493 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 494 | |
| 495 | commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 |
| 496 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 497 | Date: Mon Aug 13 17:22:31 2007 +0200 |
| 498 | |
| 499 | AVR32: Include <div64.h> instead of <asm/div64.h> |
| 500 | |
| 501 | include/asm-avr32/div64.h was recently moved to include/div64.h, but |
| 502 | cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of |
| 503 | the patch was merged perhaps?) |
| 504 | |
| 505 | This patch updates cpu/at32ap/interrupts.c so that the avr32 port |
| 506 | compiles again. |
| 507 | |
| 508 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 509 | |
| 510 | commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 |
| 511 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 512 | Date: Wed Jun 27 13:34:26 2007 +0200 |
| 513 | |
| 514 | atmel_mci: Use 512 byte blocksize if possible |
| 515 | |
| 516 | Instead of always using the largest blocksize the card supports, check |
| 517 | if it can support smaller block sizes and use 512 bytes if possible. |
| 518 | Most cards do support this, and other parts of u-boot seem to have |
| 519 | trouble with block sizes different from 512 bytes. |
| 520 | |
| 521 | Also enable underrun/overrun protection. |
| 522 | |
| 523 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 524 | Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| 525 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 526 | commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 |
| 527 | Author: Stefan Roese <sr@denx.de> |
| 528 | Date: Mon Aug 13 09:05:33 2007 +0200 |
| 529 | |
| 530 | ppc4xx: Fix problem in PLL clock calculation |
| 531 | |
| 532 | This patch was originall provided by David Mitchell <dmitchell@amcc.com> |
| 533 | and fixes a bug in the PLL clock calculation. |
| 534 | |
| 535 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 536 | |
Wolfgang Denk | be5d72d | 2007-08-13 21:57:53 +0200 | [diff] [blame] | 537 | commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b |
| 538 | Author: Wolfgang Denk <wd@denx.de> |
| 539 | Date: Sun Aug 12 21:34:50 2007 +0200 |
| 540 | |
| 541 | Update CHANGELOG |
| 542 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 543 | commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a |
| 544 | Author: Wolfgang Denk <wd@denx.de> |
| 545 | Date: Sun Aug 12 21:34:34 2007 +0200 |
| 546 | |
| 547 | Minor alignment of output, 2nd try. |
| 548 | Also update CHANGELOG |
| 549 | |
| 550 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 551 | |
| 552 | commit 6b309f22a724fad8418e811751a0741b893419cf |
| 553 | Author: Wolfgang Denk <wd@denx.de> |
| 554 | Date: Sun Aug 12 20:35:49 2007 +0200 |
| 555 | |
| 556 | Minor alignment of output |
| 557 | |
| 558 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 559 | |
| 560 | commit 6f6d7b9c8559e241e8d232621542b8b59699b07b |
| 561 | Author: Wolfgang Denk <wd@denx.de> |
| 562 | Date: Sun Aug 12 18:28:18 2007 +0200 |
| 563 | |
| 564 | Cleanup output on ADS5121 board |
| 565 | |
| 566 | Signed-off-by: Wolfgang Denk |
| 567 | |
| 568 | commit a4d2636f2a859245ed3a401f26189da2dfda4ceb |
| 569 | Author: Wolfgang Denk <wd@denx.de> |
| 570 | Date: Sun Aug 12 15:11:38 2007 +0200 |
| 571 | |
| 572 | Adapt board configuration and fix kernel crash on MCC200 board. |
| 573 | |
| 574 | The update procedure was modified to turn off the USB subsystem |
| 575 | before exit for MCC200 and TRAB. This is necessary as otherwise the |
| 576 | USB controller continues to write periodically to system memory! |
| 577 | |
| 578 | MCC200-specific notes: |
| 579 | - the patch disables the magic key check for MCC200 |
| 580 | - the patch contains the configuration changes made |
| 581 | for the new revision of the board. |
| 582 | |
| 583 | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| 584 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 585 | |
| 586 | commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf |
| 587 | Author: Wolfgang Denk <wd@denx.de> |
| 588 | Date: Sun Aug 12 14:47:54 2007 +0200 |
| 589 | |
| 590 | Adjust default configuration of ADS5121 board. |
| 591 | |
| 592 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 593 | |
| 594 | commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| 595 | Author: Wolfgang Denk <wd@denx.de> |
| 596 | Date: Sun Aug 12 14:27:39 2007 +0200 |
| 597 | |
| 598 | Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. |
| 599 | |
| 600 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 601 | |
| 602 | commit 5fe6be6208dda852c3564e384bd78d75784dea3e |
| 603 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 604 | Date: Tue Aug 7 21:14:22 2007 -0400 |
| 605 | |
| 606 | Improve error print messages. |
| 607 | |
| 608 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 609 | |
| 610 | commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 |
| 611 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 612 | Date: Tue Jul 17 13:57:04 2007 -0500 |
| 613 | |
| 614 | fdt: allow for builds that don't want env and bd_t nodes |
| 615 | |
| 616 | protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the |
| 617 | area. |
| 618 | |
| 619 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 620 | |
| 621 | commit 91148bf7aeba142d6f348805db7625db7da64d6f |
| 622 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 623 | Date: Tue Jul 17 13:56:53 2007 -0500 |
| 624 | |
| 625 | fdt: do board setup based on fdt address specified on bootm line |
| 626 | |
| 627 | The last fdt patch to bootm did board setup based on the address |
| 628 | specified by a prior fdt address command invocation. The bootm |
| 629 | code, as its call to fdt_chosen does, should use the fdt specified |
| 630 | by the user on the bootm command. Note this restores full |
| 631 | functionality for the 8360's existing default boot environment |
| 632 | values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' |
| 633 | before booting a kernel). |
| 634 | |
| 635 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 636 | |
| 637 | commit e125a2ffc209dd34794e326c7175658253beadf3 |
| 638 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 639 | Date: Tue Jul 10 20:40:39 2007 -0400 |
| 640 | |
| 641 | Call ft_board_setup() from the bootm command. |
| 642 | |
| 643 | In the patch titled "Create new fdt boardsetup command..." I removed the |
| 644 | call to ft_board_setup() from the routine fdt_chosen(), but I forgot |
| 645 | to add a direct call back into cmd_bootm.c |
| 646 | |
| 647 | This fixes the oversight by adding the direct call to the bootm command. |
| 648 | |
| 649 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 650 | |
| 651 | commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 |
| 652 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 653 | Date: Mon Jun 25 23:25:28 2007 -0400 |
| 654 | |
| 655 | Create new fdt boardsetup command, fix bug parsing [] form of set values. |
| 656 | |
| 657 | Previously ft_board_setup() was called by fdt_chosen() which was not |
| 658 | really correctly structured. This splits ft_board_setup() out by creating |
| 659 | a new fdt boardsetup command. |
| 660 | |
| 661 | Fix a bug when parsing fdt set command values which have the square |
| 662 | bracket form [00 11 22 33] - the length was updated incorrectly in when |
| 663 | parsing that form. |
| 664 | |
| 665 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 666 | |
| 667 | commit 6f35ded9e85493595e0eb66a82b502a95326d049 |
| 668 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 669 | Date: Mon Jun 25 20:55:58 2007 -0400 |
| 670 | |
| 671 | Tighten up the error messages. |
| 672 | |
| 673 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 674 | |
| 675 | commit c45874b05aae897a6c29d1a97d4bb708fca2756c |
| 676 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 677 | Date: Mon Jun 25 19:52:23 2007 -0400 |
| 678 | |
| 679 | Asthetic improvements: error messages and line lengths. |
| 680 | |
| 681 | Tighten up the error messages, split overlength lines. |
| 682 | |
| 683 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 684 | |
| 685 | commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 |
| 686 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 687 | Date: Fri May 25 22:08:57 2007 -0400 |
| 688 | |
| 689 | Fix fdt_chosen() to call ft_board_setup(), clean up long lines. |
| 690 | |
| 691 | The fdt_chosen() function was adding/seting some properties ad-hoc |
| 692 | improperly and duplicated (poorly) what was done in ft_board_setup() |
| 693 | |
| 694 | Clean up long lines (setting properties, printing errors). |
| 695 | |
| 696 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 697 | |
| 698 | commit 06e19a07701c968f15d72c083b5872a1a11c7b01 |
| 699 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 700 | Date: Mon May 21 23:27:16 2007 -0400 |
| 701 | |
| 702 | For fdt_find_node_by_path(), handle the root path properly. |
| 703 | |
| 704 | Also removes the special case root path detection in cmd_fdt.c since it |
| 705 | is no longer necessary. |
| 706 | |
| 707 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 708 | |
| 709 | commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 |
| 710 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 711 | Date: Thu May 17 23:54:36 2007 -0400 |
| 712 | |
| 713 | Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT |
| 714 | |
| 715 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| 716 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| 717 | |
| 718 | commit 1a861169bc3758f9de3aead62b058736c6891246 |
| 719 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 720 | Date: Wed Jun 6 22:47:58 2007 -0400 |
| 721 | |
| 722 | Replace fdt_node_offset() with fdt_find_node_by_path(). |
| 723 | |
| 724 | The new name matches more closely the kernel's name, which is also |
| 725 | a much better description. |
| 726 | |
| 727 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| 728 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| 729 | |
| 730 | commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 |
| 731 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 732 | Date: Wed May 16 22:39:59 2007 -0400 |
| 733 | |
| 734 | Fix cmd_fdt line lengths, refactor code. |
| 735 | |
| 736 | Break lines that were greater than 80 characters in length. |
| 737 | Move the fdt print and property parsing code to separate static functions |
| 738 | to reduce coding clutter in the fdt_cmd handling body. |
| 739 | |
| 740 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 741 | |
| 742 | commit 25114033ab21788810c48ba4df103b649da1223b |
| 743 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 744 | Date: Sat May 12 09:47:25 2007 -0400 |
| 745 | |
| 746 | FDT command improvements. |
| 747 | |
| 748 | Fix "fdt set" so that it will create a non-existing property. |
| 749 | Add "fdt mknode" to create nodes. |
| 750 | |
| 751 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 752 | |
| 753 | commit 38eb508e8e811e2e57628f445de3a24a23c7d804 |
| 754 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 755 | Date: Sat May 12 09:45:46 2007 -0400 |
| 756 | |
| 757 | Reorganize and fix problems (returns) in the bootm command. |
| 758 | |
| 759 | Do *NOT* return after the "point of no return" has been passed. |
| 760 | If something goes wrong, the board must be reset after that point. |
| 761 | Move the "Transferring control to Linux" debug message back to where it |
| 762 | belongs: just before transferring control to linux. |
| 763 | |
| 764 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 765 | |
| 766 | commit 89c8757d8f213c47709bdc4efe0695263a6080a6 |
| 767 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 768 | Date: Tue May 8 21:27:35 2007 -0400 |
| 769 | |
| 770 | Fix bugs in the CONFIG_OF_LIBFDT |
| 771 | |
| 772 | Stupid coding mistakes (identified by Timur Tabi, thanks). |
| 773 | |
| 774 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 775 | |
| 776 | commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec |
| 777 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 778 | Date: Wed Apr 25 22:47:15 2007 -0400 |
| 779 | |
| 780 | Improve fdt move length handling. |
| 781 | |
| 782 | Make the length parameter optional: if not specified, do the move using |
| 783 | the current size unchanged. |
| 784 | |
| 785 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 786 | |
| 787 | commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d |
| 788 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 789 | Date: Wed Apr 25 22:23:36 2007 -0400 |
| 790 | |
| 791 | Minor code clean up. |
| 792 | |
| 793 | Declare the variable fdt properly as extern. |
| 794 | Call the "set_fn" function pointer the "short way" without the full |
| 795 | dereferencing syntax. |
| 796 | |
| 797 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 798 | |
| 799 | commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 |
| 800 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 801 | Date: Wed Apr 25 21:24:27 2007 -0400 |
| 802 | |
| 803 | Improve error messages, more informative. |
| 804 | |
| 805 | Print more than the raw libfdt error message strings. This is especially |
| 806 | useful for cluing in the user when the bootm command aborts due to |
| 807 | blob problems. |
| 808 | |
| 809 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 810 | |
| 811 | commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 |
| 812 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 813 | Date: Fri Apr 20 22:46:53 2007 -0400 |
| 814 | |
| 815 | libfdt: Conditionally compile based on CONFIG_OF_LIBFDT |
| 816 | |
| 817 | This is the way u-boot reduces configured-out code. At Wolfgang |
| 818 | Grandegger and Wolfgang Denk's request, make libfdt conform. |
| 819 | |
| 820 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 821 | |
| 822 | commit 923efd286411ed052d9e074f59f8986d6081061c |
| 823 | Author: Bruce Adler <bruce.adler@ccpu.com> |
| 824 | Date: Fri Aug 10 14:54:47 2007 -0700 |
| 825 | |
| 826 | add image size and descriptors for Spartan 3E FPGA chips |
| 827 | |
| 828 | Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) |
| 829 | |
| 830 | Signed-off by: Bruce Adler <bruce.adler@ccpu.com> |
| 831 | |
| 832 | commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 |
| 833 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 834 | Date: Fri Aug 10 15:34:48 2007 -0500 |
| 835 | |
| 836 | make MAKEALL more immune to merge conflicts |
| 837 | |
| 838 | ..by placing board entries one per line, as suggested by jdl. |
| 839 | |
| 840 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 841 | |
| 842 | commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f |
| 843 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 844 | Date: Fri Aug 10 13:28:25 2007 -0500 |
| 845 | |
| 846 | README: Remove outdated cpu type, board type, and NAME_config lists |
| 847 | |
| 848 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 849 | |
| 850 | commit 49bb59912d21aacb507eb81fd21fb7af650c706c |
| 851 | Author: Dave Liu <r63238@freescale.com> |
| 852 | Date: Fri Aug 10 15:48:59 2007 +0800 |
| 853 | |
| 854 | mpc83xx: Suppress the warning 'burstlen' |
| 855 | |
| 856 | suppress the warning 'burstlen' of spd_sdram. |
| 857 | |
| 858 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 859 | |
Wolfgang Denk | 85eb5ca | 2007-08-14 09:47:27 +0200 | [diff] [blame] | 860 | commit c646bba6465a45c60746d4cc1602cd06c1960f2d |
| 861 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 862 | Date: Thu Aug 9 15:11:03 2007 -0500 |
| 863 | |
| 864 | Add support for SBC8641D. Config files. |
| 865 | |
| 866 | Add support for Wind River's SBC8641D reference board. |
| 867 | |
| 868 | Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 869 | Acked-by: Wolfgang Denk <wd@denx.de> |
| 870 | Acked-by: Jon Loeliger <jdl@freescale.com> |
| 871 | |
| 872 | commit 8ac273271d57321f90505c7a51cdb1ef2113b628 |
| 873 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 874 | Date: Thu Aug 9 15:10:53 2007 -0500 |
| 875 | |
| 876 | Add support for SBC8641D. Board files. |
| 877 | |
| 878 | Add support for Wind River's SBC8641D reference board. |
| 879 | |
| 880 | Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 881 | Acked-by: Wolfgang Denk <wd@denx.de> |
| 882 | Acked-by: Jon Loeliger <jdl@freescale.com> |
| 883 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 884 | commit c2c0ab4aff86622b837a48a0e560351f9afafb95 |
| 885 | Author: Stefan Roese <sr@denx.de> |
| 886 | Date: Fri Aug 10 20:34:58 2007 +0200 |
| 887 | |
| 888 | Conding style cleanup |
| 889 | |
| 890 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 891 | |
| 892 | commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e |
| 893 | Author: Sergey Kubushyn <ksi@koi8.net> |
| 894 | Date: Fri Aug 10 20:26:18 2007 +0200 |
| 895 | |
| 896 | [ARM] TI DaVinci support, hopefully final |
| 897 | |
| 898 | Add support for the following DaVinci boards: |
| 899 | - DV_EVM |
| 900 | - SCHMOOGIE |
| 901 | - SONATA |
| 902 | |
| 903 | Changes: |
| 904 | |
| 905 | - Split into separate board directories |
| 906 | - Removed changes to MTD_DEBUG (or whatever it's called) |
| 907 | - New CONFIG_CMD party line followed |
| 908 | - Some cosmetic fixes, cleanup etc. |
| 909 | - Patches against the latest U-Boot tree as of now. |
| 910 | - Fixed CONFIG_CMD_NET in net files. |
| 911 | - Fixed CONFIG_CMD_EEPROM for schmoogie. |
| 912 | - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and |
| 913 | DV_EVM. Can't check if it works on SONATA, don't have a board any more, |
| 914 | but it at least compiles. |
| 915 | |
| 916 | Here is an excerpt from session log on SCHMOOGIE... |
| 917 | |
| 918 | U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) |
| 919 | |
| 920 | DRAM: 128 MB |
| 921 | NAND: 128 MiB |
| 922 | In: serial |
| 923 | Out: serial |
| 924 | Err: serial |
| 925 | ARM Clock : 297MHz |
| 926 | DDR Clock : 162MHz |
| 927 | ETH PHY : DP83848 @ 0x01 |
| 928 | U-Boot > iprobe |
| 929 | Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F |
| 930 | U-Boot > ping 192.168.253.10 |
| 931 | host 192.168.253.10 is alive |
| 932 | U-Boot > |
| 933 | |
| 934 | Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| 935 | Acked-by: Dirk Behme <dirk.behme@gmail.com> |
| 936 | Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| 937 | Acked-by: Stefan Roese <sr@denx.de> |
| 938 | |
Wolfgang Denk | 85eb5ca | 2007-08-14 09:47:27 +0200 | [diff] [blame] | 939 | commit 2e4d94f1e3c2961428967a33b6ff2520568391b3 |
| 940 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 941 | Date: Fri Jul 27 01:50:45 2007 -0500 |
| 942 | |
| 943 | fsl_pci_init cleanup. |
| 944 | |
| 945 | Do not enable normal errors created during probe (master abort, perr, |
| 946 | and pcie Invalid Configuration access). |
| 947 | |
| 948 | Add CONFIG_PCI_NOSCAN board option to prevent bus scan. |
| 949 | |
| 950 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 951 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 952 | |
| 953 | commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a |
| 954 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 955 | Date: Fri Jul 27 01:50:44 2007 -0500 |
| 956 | |
| 957 | pciauto_setup_device bars_num fix |
| 958 | |
| 959 | Passing bars_num=0 to pciauto_setup_device should assign no bars. |
| 960 | |
| 961 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 962 | Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| 963 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 964 | |
| 965 | commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4 |
| 966 | Author: Jon Loeliger <jdl@freescale.com> |
| 967 | Date: Mon Aug 6 17:39:44 2007 -0500 |
| 968 | |
| 969 | 8641hpcn: Do correct sized pointer math. |
| 970 | |
| 971 | When I rebased Ed's patch and cleaned up a few compilation |
| 972 | problems, I apparently rebased my brain on crack first. |
| 973 | Fix that by doing (char *) sized pointer math as needed. |
| 974 | |
| 975 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 976 | |
| 977 | commit cfc7a7f5bb3273c9951173c788001d45118f141f |
| 978 | Author: Jon Loeliger <jdl@freescale.com> |
| 979 | Date: Thu Aug 2 14:42:20 2007 -0500 |
| 980 | |
| 981 | cpu/86xx fixes. |
| 982 | |
| 983 | Remove rev 1 fixes. |
| 984 | Always set PICGCR_MODE. |
| 985 | Enable machine check and provide board config option |
| 986 | to set and handle SoC error interrupts. |
| 987 | |
| 988 | Include MSSSR0 in error message. |
| 989 | |
| 990 | Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. |
| 991 | |
| 992 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 993 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 994 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 995 | commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 |
| 996 | Author: Stefan Roese <sr@denx.de> |
| 997 | Date: Fri Aug 10 10:42:25 2007 +0200 |
| 998 | |
| 999 | Coding style cleanup |
| 1000 | |
| 1001 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1002 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 1003 | commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f |
| 1004 | Author: Dirk Behme <dirk.behme@googlemail.com> |
| 1005 | Date: Thu Aug 2 17:42:08 2007 +0200 |
| 1006 | |
| 1007 | Make use of generic 64bit division in nand_util.c |
| 1008 | |
| 1009 | Use generic 64bit division in nand_util.c. This makes nand_util.c |
| 1010 | independent of any toolchain 64bit division. |
| 1011 | |
| 1012 | Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| 1013 | |
| 1014 | commit f7c086e94e8ce9aad7268af97f73aa6884686f27 |
| 1015 | Author: Dirk Behme <dirk.behme@googlemail.com> |
| 1016 | Date: Thu Aug 2 17:41:14 2007 +0200 |
| 1017 | |
| 1018 | Move 64bit division from avr32 to generic lib |
| 1019 | |
| 1020 | Move the 64bit division from lib_avr32 to lib_generic. With this, all |
| 1021 | boards can do_div/__div64_32 if needed, not only avr one. Code is put |
| 1022 | to lib_generic, so no larger memory footprint if not used. No code |
| 1023 | modifications. Thanks for proposal by HÃ¥vard Skinnemoen. |
| 1024 | |
| 1025 | Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| 1026 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1027 | commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 |
| 1028 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1029 | Date: Fri Jul 27 11:31:22 2007 +0200 |
| 1030 | |
| 1031 | Add PPC4xx-HCU4 and HCU5 boards: HCU5 files |
| 1032 | |
| 1033 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1034 | |
| 1035 | commit 6e5de26c6e7580faf16e87745cd488b92b492d0c |
| 1036 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1037 | Date: Fri Jul 27 11:30:33 2007 +0200 |
| 1038 | |
| 1039 | Add PPC4xx-HCU4 and HCU5 boards: HCU4 files |
| 1040 | |
| 1041 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1042 | |
| 1043 | commit e8397fc78c9394d71de233a4d810fbc9047e4c76 |
| 1044 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1045 | Date: Fri Jul 27 11:38:26 2007 +0200 |
| 1046 | |
| 1047 | Add PPC4xx-HCU4 and HCU5 boards: common files |
| 1048 | |
| 1049 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1050 | |
| 1051 | commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 |
| 1052 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1053 | Date: Fri Jul 27 11:28:44 2007 +0200 |
| 1054 | |
| 1055 | Add PPC4xx-HCU4 and HCU5 boards: make related |
| 1056 | |
| 1057 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1058 | |
| 1059 | commit 137fdd9f474ecb853efdace5200576308c67f18d |
| 1060 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1061 | Date: Fri Jul 27 11:28:03 2007 +0200 |
| 1062 | |
| 1063 | Add PPC4xx-HCU4 and HCU5 boards: HCU5 config |
| 1064 | |
| 1065 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1066 | |
| 1067 | commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 |
| 1068 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1069 | Date: Fri Jul 27 11:27:15 2007 +0200 |
| 1070 | |
| 1071 | Add PPC4xx-HCU4 and HCU5 boards: HCU4 config |
| 1072 | |
| 1073 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1074 | |
| 1075 | commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 |
| 1076 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1077 | Date: Fri Jul 27 11:25:31 2007 +0200 |
| 1078 | |
| 1079 | Add PPC4xx-HCU4 and HCU5 boards: READMEs |
| 1080 | |
| 1081 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1082 | |
| 1083 | commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 |
| 1084 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 1085 | Date: Fri Jul 27 11:37:40 2007 +0200 |
| 1086 | |
| 1087 | Add PPC4xx-HCU4 and HCU5 boards: Infrastructure |
| 1088 | |
| 1089 | This series of patches adds support for 2 boards from Netstal Maschinen. |
| 1090 | |
| 1091 | The HCU4 has a PPC405Gpr and |
| 1092 | the HCU5 has a PPC440EPX. |
| 1093 | |
| 1094 | The HCU4 has a somehow complicated flash setup, as the booteprom is |
| 1095 | only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more |
| 1096 | elegant solution. |
| 1097 | |
| 1098 | The HCU5 has only a booteprom as the whole code will be downloaded from a |
| 1099 | different board which has HD, CD-ROM, etc and where all code is stored. |
| 1100 | |
| 1101 | This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. |
| 1102 | Thanks them a lot. |
| 1103 | |
| 1104 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| 1105 | |
| 1106 | commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 |
| 1107 | Author: Stefan Roese <sr@denx.de> |
| 1108 | Date: Fri Aug 10 08:42:55 2007 +0200 |
| 1109 | |
| 1110 | ppc4xx: Update lwmon5 POST configuration |
| 1111 | |
| 1112 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1113 | |
| 1114 | commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 |
| 1115 | Author: Yuri Tikhonov <yur@emcraft.com> |
| 1116 | Date: Fri Aug 10 08:25:22 2007 +0200 |
| 1117 | |
| 1118 | POST: Add ppc4xx UART POST support without external uart clock (lwmon5) |
| 1119 | |
| 1120 | The patch adds support for UART POST on ppc44x-based boards with no |
| 1121 | external serial clocks installed. |
| 1122 | |
| 1123 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| 1124 | Acked-by: Stefan Roese <sr@denx.de> |
| 1125 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 1126 | commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f |
| 1127 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 1128 | Date: Mon Aug 6 18:18:34 2007 -0500 |
| 1129 | |
| 1130 | mpc83xx: fix ITX[GP] O=builddir builds |
| 1131 | |
| 1132 | make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. |
| 1133 | |
| 1134 | Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or |
| 1135 | "BUILD_DIR=<some dir> ./MAKEALL ..." |
| 1136 | |
| 1137 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1138 | |
| 1139 | commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 |
| 1140 | Author: Dave Liu <r63238@freescale.com> |
| 1141 | Date: Wed Aug 1 15:00:59 2007 +0800 |
| 1142 | |
| 1143 | mpc83xx: Correct the README for DDR ECC |
| 1144 | |
| 1145 | Update the README for DDR ECC, change the name |
| 1146 | to README.mpc83xx.ddrecc. |
| 1147 | |
| 1148 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1149 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1150 | |
| 1151 | commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 |
| 1152 | Author: Dave Liu <r63238@freescale.com> |
| 1153 | Date: Wed Aug 1 15:00:15 2007 +0800 |
| 1154 | |
| 1155 | mpc83xx: Consolidate the ECC support of 83xx |
| 1156 | |
| 1157 | Remove the duplicated source code of ecc command on the <board>.c, |
| 1158 | for reused, move these code to cpu/mpc83xx directory. |
| 1159 | |
| 1160 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1161 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1162 | |
| 1163 | commit 036575c544cf1b69654d8fb334bda69c6ff3da36 |
| 1164 | Author: Dave Liu <r63238@freescale.com> |
| 1165 | Date: Sat Aug 4 13:37:39 2007 +0800 |
| 1166 | |
| 1167 | mpc83xx: Correct the burst length for DDR2 with 32 bits |
| 1168 | |
| 1169 | The burst length should be 4 for DDR2 with 32 bits bus |
| 1170 | |
| 1171 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1172 | |
| 1173 | commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed |
| 1174 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 1175 | Date: Wed Jul 25 19:25:33 2007 -0500 |
| 1176 | |
| 1177 | mpc83xx: add support for the MPC8323E RDB |
| 1178 | |
| 1179 | MPC8323E based board with 64MB fixed SDRAM, 16MB flash, |
| 1180 | five 10/100 ethernet ports connected via an ICPlus IP175C |
| 1181 | switch, one PCI slot, and serial. Features not supported |
| 1182 | in this patch are SD card interface, 2 USB ports, and the |
| 1183 | two phone ports. |
| 1184 | |
| 1185 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| 1186 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1187 | |
| 1188 | commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 |
| 1189 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 1190 | Date: Wed Jul 25 19:25:28 2007 -0500 |
| 1191 | |
| 1192 | mpc83xx: fixup generic pci for libfdt |
| 1193 | |
| 1194 | add libfdt support to the generic 83xx pci code |
| 1195 | |
| 1196 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1197 | |
| 1198 | commit f57ac7a7b37109245b69db80839ebee26179966a |
| 1199 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 1200 | Date: Wed Jul 25 19:25:22 2007 -0500 |
| 1201 | |
| 1202 | mpc83xx: fix 8360 and cpu functions to update fdt being passed |
| 1203 | |
| 1204 | ..and not the global fdt. Rename local fdt vars to blob so as not to |
| 1205 | be confused with the global var with the same three-letter name. |
| 1206 | |
| 1207 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1208 | |
| 1209 | commit 8be404459a6b7395415a57bb35e8377e3b2b5acb |
| 1210 | Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| 1211 | Date: Wed Jul 4 21:34:24 2007 -0400 |
| 1212 | |
| 1213 | mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled |
| 1214 | |
| 1215 | Several node strings were not correct (trailing slashes and properties |
| 1216 | in the strings) |
| 1217 | Added setting of the timebase-frequency. |
| 1218 | Improved error messages and use debug() instead of printf(). |
| 1219 | |
| 1220 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| 1221 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1222 | |
| 1223 | commit 26d02c9bbac1751c5e19294f000100b48d43a920 |
| 1224 | Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| 1225 | Date: Wed Jul 4 21:27:30 2007 -0400 |
| 1226 | |
| 1227 | mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). |
| 1228 | |
| 1229 | The new name matches more closely the kernel's name, which is also |
| 1230 | a much better description. |
| 1231 | |
| 1232 | These are the mpc83xx changes made necessary by the function name change. |
| 1233 | |
| 1234 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| 1235 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| 1236 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1237 | |
| 1238 | commit 9be39a67c9f8fef7107f5df09d673005f04d0963 |
| 1239 | Author: Dave Liu <daveliu@freescale.com> |
| 1240 | Date: Mon Jun 25 10:41:56 2007 +0800 |
| 1241 | |
| 1242 | mpc83xx: Add support for the display of reset status |
| 1243 | |
| 1244 | 83xx processor family has many reset sources, such as |
| 1245 | power on reset, software hard reset, software soft reset, |
| 1246 | JTAG, bus monitor, software watchdog, check stop reset, |
| 1247 | external hard reset, external software reset. |
| 1248 | sometimes, to figure out the fault of system, we need to |
| 1249 | know the cause of reset early before the prompt of |
| 1250 | u-boot present. |
| 1251 | |
| 1252 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1253 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1254 | |
| 1255 | commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d |
| 1256 | Author: Dave Liu <daveliu@freescale.com> |
| 1257 | Date: Mon Jun 25 10:41:04 2007 +0800 |
| 1258 | |
| 1259 | mpc83xx: Fix the align bug of SDMA buffer |
| 1260 | |
| 1261 | According to the latest user manual, the SDMA temporary |
| 1262 | buffer base address must be 4KB aligned. |
| 1263 | |
| 1264 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1265 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1266 | |
| 1267 | commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 |
| 1268 | Author: Dave Liu <daveliu@freescale.com> |
| 1269 | Date: Mon Jun 25 13:21:12 2007 +0800 |
| 1270 | |
| 1271 | mpc83xx: Revise the MPC8360EMDS readme doc |
| 1272 | |
| 1273 | When the rev2.x silicon mount on the MPC8360EMDS baord, |
| 1274 | and if you are using the u-boot version after the commit |
| 1275 | 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. |
| 1276 | to make the ethernet interface usable, we have to setup |
| 1277 | the jumpers correctly. |
| 1278 | |
| 1279 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 1280 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1281 | |
| 1282 | commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c |
| 1283 | Author: Timur Tabi <timur@freescale.com> |
| 1284 | Date: Tue Jul 3 13:46:32 2007 -0500 |
| 1285 | |
| 1286 | FSL I2C driver programs the two I2C busses differently |
| 1287 | |
| 1288 | The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. |
| 1289 | The second I2C bus has its slave address programmed incorrectly and is |
| 1290 | missing a 5-us delay. |
| 1291 | |
| 1292 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 1293 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1294 | |
| 1295 | commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 |
| 1296 | Author: Timur Tabi <timur@freescale.com> |
| 1297 | Date: Tue Jul 3 13:04:34 2007 -0500 |
| 1298 | |
| 1299 | Update SCCR programming in cpu_init_f() to support all 83xx processors |
| 1300 | |
| 1301 | Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the |
| 1302 | bitfields for all 83xx processors. The code to update some bitfields was |
| 1303 | compiled only on some processors. Now, the bitfields are programmed as long |
| 1304 | as the corresponding CFG_SCCR option is defined in the board header file. |
| 1305 | This means that the board header file should not define any CFG_SCCR macros |
| 1306 | for bitfields that don't exist on that processor, otherwise the SCCR will be |
| 1307 | programmed incorrectly. |
| 1308 | |
| 1309 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 1310 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1311 | |
| 1312 | commit 9546266999f0b9b51372636614211b88d90f0f25 |
| 1313 | Author: Martin Krause <martin.krause@tqs.de> |
| 1314 | Date: Fri Jun 22 13:04:22 2007 +0200 |
| 1315 | |
| 1316 | TQM834x: cleanup configuraton |
| 1317 | |
| 1318 | Remove irritating #undef DEBUG |
| 1319 | |
| 1320 | Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| 1321 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1322 | |
| 1323 | commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc |
| 1324 | Author: david.saada <David.Saada@ecitele.com> |
| 1325 | Date: Mon Jun 18 09:09:53 2007 -0700 |
| 1326 | |
| 1327 | MPC83xx: Fix makefile to generate config.h file in the build directory |
| 1328 | |
| 1329 | MPC83xx: Fix the Makefile config sections to generate the include/config.h |
| 1330 | file in the build directory instead of the source directory. |
| 1331 | |
| 1332 | Signed-off-by: David Saada <david.saada@ecitele.com> |
| 1333 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1334 | |
| 1335 | commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 |
| 1336 | Author: Lee Nipper <Lee.Nipper@freescale.com> |
| 1337 | Date: Thu Jun 14 20:07:33 2007 -0500 |
| 1338 | |
| 1339 | mpc83xx: Add support for 8360 silicon revision 2.1 |
| 1340 | |
| 1341 | This change adds 8360 silicon revision 2.1 support to u-boot. |
| 1342 | |
| 1343 | Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| 1344 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1345 | |
| 1346 | commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 |
| 1347 | Author: Kumar Gala <galak@kernel.crashing.org> |
| 1348 | Date: Wed Aug 8 04:14:28 2007 -0500 |
| 1349 | |
| 1350 | Treat ppc64 host as ppc |
| 1351 | |
| 1352 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 1353 | |
| 1354 | commit 0dc4279b08ff82472bec2e2c90858602459febe8 |
| 1355 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1356 | Date: Wed Aug 8 09:01:46 2007 +0800 |
| 1357 | |
| 1358 | Minor fix for bios emulator makefile |
| 1359 | |
| 1360 | Add $(obj) to LIB avoiding objects be built in the source dir |
| 1361 | |
| 1362 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1363 | |
| 1364 | commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 |
| 1365 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1366 | Date: Wed Aug 8 08:33:11 2007 +0800 |
| 1367 | |
| 1368 | Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| 1369 | |
| 1370 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1371 | |
| 1372 | This patch fix the compile issue on the board that did not enable the bios emulator |
| 1373 | |
| 1374 | commit ed8106433522f2ea8933e9808346860d061d7731 |
| 1375 | Author: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| 1376 | Date: Tue Jul 31 12:27:25 2007 -0500 |
| 1377 | |
| 1378 | tsec: fix multiple PHY support |
| 1379 | |
| 1380 | The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" |
| 1381 | broke multiple PHY support in tsec.c. This fixes it. |
| 1382 | |
| 1383 | Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| 1384 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 1385 | |
| 1386 | commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede |
| 1387 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 1388 | Date: Thu Aug 9 09:08:18 2007 -0500 |
| 1389 | |
| 1390 | tsec: Allow Ten Bit Interface address to be configurable |
| 1391 | |
| 1392 | Allow the address of the Ten Bit Interface (TBI) to be changed in the |
| 1393 | event of a conflict with another device. |
| 1394 | |
| 1395 | Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 1396 | |
| 1397 | commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c |
| 1398 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1399 | Date: Tue Aug 7 16:17:06 2007 +0800 |
| 1400 | |
| 1401 | Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| 1402 | |
| 1403 | This patch fix the compile issue on the board that did not enable the bios emulator |
| 1404 | |
| 1405 | commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 |
| 1406 | Author: Wolfgang Denk <wd@denx.de> |
| 1407 | Date: Tue Aug 7 16:02:13 2007 +0200 |
| 1408 | |
| 1409 | Fix missing brace error in fs/fat/fat.c |
| 1410 | [pointed out by Roderik Wildenburg] |
| 1411 | |
| 1412 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1413 | |
| 1414 | commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 |
| 1415 | Author: Wolfgang Denk <wd@denx.de> |
| 1416 | Date: Mon Aug 6 23:21:05 2007 +0200 |
| 1417 | |
| 1418 | Fixed typo in README (pointed out by Martin Jost). |
| 1419 | |
| 1420 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1421 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1422 | commit 537223afa61f64480df31ce440a9cb386df4a814 |
| 1423 | Author: Stefan Roese <sr@denx.de> |
| 1424 | Date: Mon Aug 6 21:10:17 2007 +0200 |
| 1425 | |
| 1426 | ppc4xx: Update AMCC Bamboo README doc/README.bamboo |
| 1427 | |
| 1428 | As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>, |
| 1429 | here an updated Bamboo README. |
| 1430 | |
| 1431 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1432 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 1433 | commit 9c7e4b06214db61bb21f1bcbe57c97519669baae |
| 1434 | Author: Wolfgang Denk <wd@denx.de> |
| 1435 | Date: Mon Aug 6 02:17:36 2007 +0200 |
| 1436 | |
| 1437 | Coding style cleanup. Update CHANGELOG. |
| 1438 | |
| 1439 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1440 | |
| 1441 | commit 221838cc7eb178370ff62aa05920a582e12ac322 |
| 1442 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1443 | Date: Tue Jul 10 09:03:22 2007 +0800 |
| 1444 | |
| 1445 | Remove the bios emulator from MAI board. |
| 1446 | |
| 1447 | The bios emulator in the MAI board can not pass compile |
| 1448 | and have a lot of crap in it. remove it and will have a |
| 1449 | clean and small bios emulator in the drivers directory |
| 1450 | which can be uesed for every board. |
| 1451 | |
| 1452 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1453 | |
| 1454 | commit 5618332409bb96f4448d1712899369fc80c0b489 |
| 1455 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1456 | Date: Fri Jul 13 12:14:59 2007 +0800 |
| 1457 | |
| 1458 | Fix some compile issues for MAI board. |
| 1459 | |
| 1460 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1461 | |
| 1462 | commit 0f460a1ee148b648ee242c3157650287d4296260 |
| 1463 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1464 | Date: Fri Jul 13 12:14:58 2007 +0800 |
| 1465 | |
| 1466 | Configurations for ATI video card BIOS emulator |
| 1467 | |
| 1468 | This patch add definition of the BIOS emulator and the ATI framebuffer |
| 1469 | driver for MPC8641HPCN board. |
| 1470 | |
| 1471 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1472 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 1473 | |
| 1474 | commit ece92f85053b8df613edcf05b26a416cbc3d629c |
| 1475 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1476 | Date: Fri Jul 6 08:34:56 2007 +0800 |
| 1477 | |
| 1478 | This is a BIOS emulator, porting from SciTech for u-boot, mainly for |
| 1479 | ATI video card BIOS. and can be used for x86 code emulation by some |
| 1480 | modifications. |
| 1481 | |
| 1482 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1483 | |
| 1484 | commit 5072188acabde3178fac7f5a597150e6e74fd40c |
| 1485 | Author: Jason Jin <Jason.jin@freescale.com> |
| 1486 | Date: Fri Jul 6 08:33:33 2007 +0800 |
| 1487 | |
| 1488 | This is a framebuffer driver for ATI video card, can work for PCI9200, |
| 1489 | X300, X700, X800 ATI video cards. |
| 1490 | |
| 1491 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 1492 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 1493 | |
Wolfgang Denk | 9c7e4b0 | 2007-08-06 02:17:36 +0200 | [diff] [blame] | 1494 | commit 5728be389e65fd47f34b33c2596271eb4db751ae |
| 1495 | Author: Wolfgang Denk <wd@denx.de> |
| 1496 | Date: Mon Aug 6 01:01:49 2007 +0200 |
| 1497 | |
| 1498 | Coding style cleanup. Update CHANGELOG. |
| 1499 | |
| 1500 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1501 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1502 | commit 8092fef4c29b395958bb649647da7e3775731517 |
| 1503 | Author: Martin Krause <Martin.Krause@tqs.de> |
| 1504 | Date: Tue Dec 12 14:26:01 2006 +0100 |
| 1505 | |
| 1506 | Add functions to list of exported functions |
| 1507 | |
| 1508 | Additionally export the following fuctions (to make trab_config build again): |
| 1509 | - simple_strtol() |
| 1510 | - strcmp() |
| 1511 | |
| 1512 | Also bump the ABI version to reflect this change |
| 1513 | |
| 1514 | Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| 1515 | |
| 1516 | commit 63cec5814fab5d2b1c86982327433807a5ac0249 |
| 1517 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1518 | Date: Thu Aug 2 14:09:49 2007 -0500 |
| 1519 | |
| 1520 | Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. |
| 1521 | |
| 1522 | All of the PCI/PCI-Express driver and initialization code that |
| 1523 | was in the MPC8641HPCN port has now been moved into the common |
| 1524 | drivers/fsl_pci_init.c. In a subsequent patch, this will be |
| 1525 | utilized by the 85xx ports as well. |
| 1526 | |
| 1527 | Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. |
| 1528 | |
| 1529 | Also enable the second PCI-Express controller on 8641 |
| 1530 | by getting its BATS and CFG_ setup right. |
| 1531 | |
| 1532 | Fixed a u16 vendor compiler warning in AHCI driver too. |
| 1533 | |
| 1534 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1535 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 1536 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 1537 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 1538 | commit 86b116b1b1e165ca4840daefed36d2e3b8460173 |
| 1539 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 1540 | Date: Fri Aug 3 12:08:16 2007 +0200 |
| 1541 | |
| 1542 | cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. |
| 1543 | |
| 1544 | Add the ability for modules from the Schindler cm5200 family to use a |
| 1545 | single U-Boot image: |
| 1546 | - rename cm1_qp1 to cm5200 |
| 1547 | - add run-time module detection |
| 1548 | - parametrize SDRAM configuration according to the module we are running on |
| 1549 | |
| 1550 | Few minor, board-specific fixes included in this patch: |
| 1551 | - better MAC address handling |
| 1552 | - updated default environment ('update' command uses +{filesize} now) |
| 1553 | - improved error messages in the auto-update code |
| 1554 | - allow booting U-Boot from RAM (CFG_RAMBOOT) |
| 1555 | |
| 1556 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 1557 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 1558 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| 1559 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1560 | commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 |
| 1561 | Author: Andy Fleming <afleming@freescale.com> |
| 1562 | Date: Fri Aug 3 04:05:25 2007 -0500 |
| 1563 | |
| 1564 | Add Marvell 1149 PHY support to the TSEC |
| 1565 | |
Wolfgang Denk | f2c2a93 | 2007-08-06 01:11:08 +0200 | [diff] [blame] | 1566 | commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1567 | Author: Wolfgang Denk <wd@denx.de> |
Wolfgang Denk | f2c2a93 | 2007-08-06 01:11:08 +0200 | [diff] [blame] | 1568 | Date: Thu Aug 2 21:27:46 2007 +0200 |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1569 | |
Wolfgang Denk | f2c2a93 | 2007-08-06 01:11:08 +0200 | [diff] [blame] | 1570 | Coding style cleanup, update CHANGELOG |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1571 | |
| 1572 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1573 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1574 | commit 63e22764d2f8653f68888c667eb65b3996b52680 |
| 1575 | Author: Wolfgang Denk <wd@denx.de> |
| 1576 | Date: Thu Aug 2 10:11:18 2007 +0200 |
| 1577 | |
| 1578 | Minor cleanup of <board>_nand build rules. |
| 1579 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1580 | commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef |
| 1581 | Author: Stefan Roese <sr@denx.de> |
| 1582 | Date: Thu Aug 2 08:33:56 2007 +0200 |
| 1583 | |
| 1584 | ppc4xx: Code cleanup |
| 1585 | |
| 1586 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1587 | |
| 1588 | commit c92409812206ac67a7fa7aae298539a9c3804a46 |
| 1589 | Author: Grzegorz Bernacki <gjb@semihalf.com> |
| 1590 | Date: Tue Jul 31 18:51:48 2007 +0200 |
| 1591 | |
| 1592 | [ppc440SPe] Graceful recovery from machine check during PCIe configuration |
| 1593 | |
| 1594 | During config transactions on the PCIe bus an attempt to scan for a |
| 1595 | non-existent device can lead to a machine check exception with certain |
| 1596 | peripheral devices. In order to avoid crashing in such scenarios the |
| 1597 | instrumented versions of the config cycle read routines are introduced, so |
| 1598 | the exceptions fixups framework can gracefully recover. |
| 1599 | |
| 1600 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 1601 | Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| 1602 | |
| 1603 | commit dec99558b9ea75a37940d07f41a3565a50b54ad1 |
| 1604 | Author: Rafal Jaworowski <raj@semihalf.com> |
| 1605 | Date: Tue Jul 31 18:19:54 2007 +0200 |
| 1606 | |
| 1607 | [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A |
| 1608 | |
| 1609 | This brings back separate settings for PCIe bus numbers depending on chip |
| 1610 | revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa |
| 1611 | commit. 440SPe rev. A does NOT work properly with the same settings as for |
| 1612 | the rev. B (no devices are seen on the bus during enumeration). |
| 1613 | |
| 1614 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| 1615 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1616 | commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 |
| 1617 | Author: Wolfgang Denk <wd@denx.de> |
| 1618 | Date: Thu Aug 2 00:48:45 2007 +0200 |
| 1619 | |
| 1620 | Fix build errors and warnings / code cleanup. |
| 1621 | |
| 1622 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1623 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1624 | commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 |
| 1625 | Author: Eugene OBrien <eugene.obrien@advantechamt.com> |
| 1626 | Date: Tue Jul 31 10:24:56 2007 +0200 |
| 1627 | |
| 1628 | ppc4xx: Update AMCC Bamboo 440EP support |
| 1629 | |
| 1630 | Changed storage type of cfg_simulate_spd_eeprom to const |
| 1631 | Changed storage type of gpio_tab to stack storage |
| 1632 | (Cannot access global data declarations in .bss until afer code relocation) |
| 1633 | |
| 1634 | Improved SDRAM tests to catch problems where data is not uniquely addressable |
| 1635 | (e.g. incorrectly programmed SDRAM row or columns) |
| 1636 | |
| 1637 | Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules |
| 1638 | Fixed AM29LV320DT (OpCode Flash) sector map |
| 1639 | |
| 1640 | Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> |
| 1641 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1642 | |
| 1643 | commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 |
| 1644 | Author: Stefan Roese <sr@denx.de> |
| 1645 | Date: Tue Jul 31 08:37:01 2007 +0200 |
| 1646 | |
| 1647 | ppc4xx: Update 440EPx lwmon5 board support |
| 1648 | |
| 1649 | - Clear ECC status regs after ECC POST test |
| 1650 | - Set dcbz for ECC generation with caches enabled as default |
| 1651 | - Code cleanup |
| 1652 | |
| 1653 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1654 | |
| 1655 | commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 |
| 1656 | Author: Stefan Roese <sr@denx.de> |
| 1657 | Date: Mon Jul 30 11:04:57 2007 +0200 |
| 1658 | |
| 1659 | ppc4xx: Only print ECC related info when the error bis are set |
| 1660 | |
| 1661 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1662 | |
| 1663 | commit e36220a4baf1f188ba60f17e9d0f043069b1362a |
| 1664 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 1665 | Date: Fri Jul 27 16:44:31 2007 +0200 |
| 1666 | |
| 1667 | new FPGA image for PLU405 board |
| 1668 | |
| 1669 | new FPGA image for PLU405 board with improved CompactFlash timing |
| 1670 | |
| 1671 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 1672 | |
Wolfgang Denk | b1b54e3 | 2007-08-02 21:27:46 +0200 | [diff] [blame] | 1673 | commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 |
| 1674 | Author: Rafal Jaworowski <raj@semihalf.com> |
| 1675 | Date: Fri Jul 27 14:43:59 2007 +0200 |
| 1676 | |
| 1677 | [ADS5121] Support for the ADS5121 board |
| 1678 | |
| 1679 | The following MPC5121e subsystems are supported: |
| 1680 | |
| 1681 | - low-level CPU init |
| 1682 | - NOR Boot Flash (common CFI driver) |
| 1683 | - DDR SDRAM |
| 1684 | - FEC |
| 1685 | - I2C |
| 1686 | - Watchdog |
| 1687 | |
| 1688 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 1689 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| 1690 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| 1691 | |
| 1692 | commit 1863cfb7b100ba0ee3401799457a01dc058745f8 |
| 1693 | Author: Rafal Jaworowski <raj@semihalf.com> |
| 1694 | Date: Fri Jul 27 14:22:04 2007 +0200 |
| 1695 | |
| 1696 | [PPC] Remove unused MSR_USER definition |
| 1697 | |
| 1698 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| 1699 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1700 | commit d4024bb72dd81695ec099b2199eda0d27c623e62 |
| 1701 | Author: John Otken <john@softadvances.com> |
| 1702 | Date: Thu Jul 26 17:49:11 2007 +0200 |
| 1703 | |
| 1704 | ppc4xx: Add support for AMCC 405EP Taihu board |
| 1705 | |
| 1706 | Signed-off-by: John Otken <john@softadvances.com> |
| 1707 | |
| 1708 | commit b66091de6c7390620312c2501db23d8391e7cabb |
| 1709 | Author: Anatolij Gustschin <agust@denx.de> |
| 1710 | Date: Thu Jul 26 15:08:01 2007 +0200 |
| 1711 | |
| 1712 | ppc4xx: lwmon5: Update Lime initialization |
| 1713 | |
| 1714 | Change Lime SDRAM initialization to now support 100MHz and |
| 1715 | 133MHz (if enabled). Also the framebuffer is initialized to |
| 1716 | display a blue rectangle with a white border. |
| 1717 | |
| 1718 | Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| 1719 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1720 | |
| 1721 | commit 9f24a808f17fc0f37b7fb4805f734741335caecc |
| 1722 | Author: Stefan Roese <sr@denx.de> |
| 1723 | Date: Tue Jul 24 09:52:52 2007 +0200 |
| 1724 | |
| 1725 | ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added |
| 1726 | |
| 1727 | The used Intel NOR FLASH chips have internally two dies, and are now |
| 1728 | treated as two seperate chips. |
| 1729 | |
| 1730 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1731 | |
| 1732 | commit aedf5bde179ecfbd0a96130d18996a96518b785f |
| 1733 | Author: Stefan Roese <sr@denx.de> |
| 1734 | Date: Tue Jul 24 07:20:09 2007 +0200 |
| 1735 | |
| 1736 | ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) |
| 1737 | |
| 1738 | As suggested by Hakan Eryigit, here an updated setup for the lwmon5 |
| 1739 | interrupt controller. |
| 1740 | |
| 1741 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1742 | |
| 1743 | commit a71d96eac8130b53a91f93cd10c70fca0db18d52 |
| 1744 | Author: Stefan Roese <sr@denx.de> |
| 1745 | Date: Fri Jul 20 15:03:44 2007 +0200 |
| 1746 | |
| 1747 | ppc4xx: Fix bug with default GPIO output value |
| 1748 | |
| 1749 | As spotted by Matthias Fuchs, the default output values for all GPIO1 |
| 1750 | outputs were not setup correctly. This patch fixes this issue. |
| 1751 | |
| 1752 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1753 | |
| 1754 | commit 531e3e8b831f357056448fa573137d5fb37000fd |
| 1755 | Author: Pavel Kolesnikov <concord@emcraft.com> |
| 1756 | Date: Fri Jul 20 15:03:03 2007 +0200 |
| 1757 | |
| 1758 | POST: Add ECC POST for the lwmon5 board |
| 1759 | |
| 1760 | This patch adds ECC Post test for the Lwmon5 board based |
| 1761 | on PPC440EPx to U-Boot. |
| 1762 | |
| 1763 | Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> |
| 1764 | Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| 1765 | Acked-by: Stefan Roese <sr@denx.de> |
| 1766 | |
Wolfgang Denk | b1b54e3 | 2007-08-02 21:27:46 +0200 | [diff] [blame] | 1767 | commit cc3023b9f95d7ac959a764471a65001062aecf41 |
| 1768 | Author: Rafal Jaworowski <raj@semihalf.com> |
| 1769 | Date: Thu Jul 19 17:12:28 2007 +0200 |
| 1770 | |
| 1771 | Fix breakage of 8xx boards from recent commit. |
| 1772 | |
| 1773 | This patch fixes the negative consequences for 8xx of the recent |
| 1774 | "ppc4xx: Clean up 440 exceptions handling" commit. |
| 1775 | |
| 1776 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| 1777 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1778 | commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf |
| 1779 | Author: Stefan Roese <sr@denx.de> |
| 1780 | Date: Mon Jul 16 10:02:12 2007 +0200 |
| 1781 | |
| 1782 | ppc4xx: Code cleanup |
| 1783 | |
| 1784 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1785 | |
| 1786 | commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 |
| 1787 | Author: Stefan Roese <sr@denx.de> |
| 1788 | Date: Mon Jul 16 10:01:38 2007 +0200 |
| 1789 | |
| 1790 | ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup |
| 1791 | |
| 1792 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1793 | |
| 1794 | commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 |
| 1795 | Author: Stefan Roese <sr@denx.de> |
| 1796 | Date: Mon Jul 16 10:00:43 2007 +0200 |
| 1797 | |
| 1798 | ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c |
| 1799 | |
| 1800 | The new boardspecific DDR2 controller configuration is used for the Yucca |
| 1801 | board. Now the Yucca board with 440SPe Rev. A chips is also supported. |
| 1802 | |
| 1803 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1804 | |
| 1805 | commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e |
| 1806 | Author: Stefan Roese <sr@denx.de> |
| 1807 | Date: Mon Jul 16 09:57:00 2007 +0200 |
| 1808 | |
| 1809 | ppc4xx: Add new weak functions to support boardspecific DDR2 configuration |
| 1810 | |
| 1811 | The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better |
| 1812 | support non default, boardspecific DDR(2) controller configuration. |
| 1813 | |
| 1814 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1815 | |
| 1816 | commit 5743a9207a370b90f09b20ebd61167c806b937f3 |
| 1817 | Author: Stefan Roese <sr@denx.de> |
| 1818 | Date: Mon Jul 16 08:53:51 2007 +0200 |
| 1819 | |
| 1820 | ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup |
| 1821 | |
| 1822 | The new function remove_tlb() can be used to remove the TLB's used to |
| 1823 | map a specific memory region. This is especially useful for the DDR(2) |
| 1824 | setup routines which configure the SDRAM area temporarily as a cached |
| 1825 | area (for speedup on auto-calibration and ECC generation) and later |
| 1826 | need this area uncached for normal usage. |
| 1827 | |
| 1828 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1829 | |
Wolfgang Denk | b1b54e3 | 2007-08-02 21:27:46 +0200 | [diff] [blame] | 1830 | commit 3a6cab844cf74f76639d795e0be8717e02c86af7 |
| 1831 | Author: Wolfgang Denk <wd@denx.de> |
| 1832 | Date: Sat Jul 14 22:51:02 2007 +0200 |
| 1833 | |
| 1834 | Update CHANGELOG |
| 1835 | |
| 1836 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1837 | |
Wolfgang Denk | 3a6cab8 | 2007-07-14 22:51:02 +0200 | [diff] [blame] | 1838 | commit 011595307731a7a67a7445d107c279d031e8ab97 |
| 1839 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 1840 | Date: Sat Jul 14 01:06:58 2007 +0200 |
| 1841 | |
| 1842 | [PCS440EP] - fix compile error, if BUILD_DIR is used |
| 1843 | |
| 1844 | commit fad63407154f46246ce80d53a9c669a44362ac67 |
| 1845 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 1846 | Date: Fri Jul 13 09:54:17 2007 +0200 |
| 1847 | |
| 1848 | make show_boot_progress () weak. |
| 1849 | |
| 1850 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 1851 | |
| 1852 | commit 907902472391b6ca1876ec300687562ecaf459b1 |
| 1853 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 1854 | Date: Fri Jul 13 08:26:05 2007 +0200 |
| 1855 | |
| 1856 | [PCS440EP] - The DIAG LEDs are now blinking, if an error occur |
| 1857 | - fix compile error, if BUILD_DIR is used |
| 1858 | |
| 1859 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 1860 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 1861 | commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 |
| 1862 | Author: Stefan Roese <sr@denx.de> |
| 1863 | Date: Thu Jul 12 16:32:08 2007 +0200 |
| 1864 | |
| 1865 | ppc4xx: Change receive buffer handling in the 4xx emac driver |
| 1866 | |
| 1867 | This change fixes a bug in the receive buffer handling, that |
| 1868 | could lead to problems upon high network traffic (broadcasts...). |
| 1869 | |
| 1870 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 1871 | |
Wolfgang Denk | 3a6cab8 | 2007-07-14 22:51:02 +0200 | [diff] [blame] | 1872 | commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 |
| 1873 | Author: Wolfgang Denk <wd@denx.de> |
| 1874 | Date: Thu Jul 12 01:45:34 2007 +0200 |
| 1875 | |
| 1876 | Update CHANGELOG, minor coding style cleanup. |
| 1877 | |
| 1878 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 1879 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1880 | commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 |
| 1881 | Author: Andy Fleming <afleming@freescale.com> |
| 1882 | Date: Fri Jun 8 16:41:18 2007 -0500 |
| 1883 | |
| 1884 | Remove erroneous errata code from Marvel 88E1111S driver |
| 1885 | |
| 1886 | The Marvel 88E1111S driver for the TSEC was copied from the |
| 1887 | 88E1101 driver, and included a fix for an erratum which does not |
Wolfgang Denk | ec06b27 | 2007-08-06 15:59:45 +0200 | [diff] [blame] | 1888 | exist on that part. Now it is removed |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 1889 | |
| 1890 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1891 | |
| 1892 | commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 |
| 1893 | Author: Andy Fleming <afleming@freescale.com> |
| 1894 | Date: Tue Jun 5 16:38:44 2007 -0500 |
| 1895 | |
| 1896 | From: eran liberty <eran.liberty@gmail.com> |
| 1897 | |
| 1898 | adds the reset register to 85xx immap |
| 1899 | |
| 1900 | Signed-off-by: Eran Liberty <eran.liberty@gmail.com> |
| 1901 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1902 | |
| 1903 | commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 |
| 1904 | Author: Andy Fleming <afleming@freescale.com> |
| 1905 | Date: Thu May 10 17:50:01 2007 -0500 |
| 1906 | |
| 1907 | Polished the 85xx ADS config files |
| 1908 | |
| 1909 | Made the boot commands use device trees by default. |
| 1910 | Also moved the ramdisk to 1000000 (I think the previous address |
| 1911 | was getting overridden during boot). |
| 1912 | |
| 1913 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1914 | |
| 1915 | commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 |
| 1916 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1917 | Date: Wed May 9 11:03:32 2007 -0500 |
| 1918 | |
| 1919 | 8544ds: Fix Makefile after moving pixis to board/freescale. |
| 1920 | |
| 1921 | The OBJTREE != SRCTREE build scenario was broken. |
| 1922 | This fixes it. |
| 1923 | |
| 1924 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1925 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 1926 | |
| 1927 | commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e |
| 1928 | Author: Andy Fleming <afleming@freescale.com> |
| 1929 | Date: Wed May 9 00:54:20 2007 -0500 |
| 1930 | |
| 1931 | tsec: Fix PHY code to match first driver |
| 1932 | |
| 1933 | Jarrold Wen noticed that the generic PHY code always matches |
| 1934 | under the current implementation. Change it so the first match |
| 1935 | wins, and *only* unknown PHYs trigger the generic driver |
| 1936 | |
| 1937 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1938 | |
| 1939 | commit ccc091aac61a38cd998d575d92f7232e256d6312 |
| 1940 | Author: Andy Fleming <afleming@freescale.com> |
| 1941 | Date: Tue May 8 17:27:43 2007 -0500 |
| 1942 | |
| 1943 | Add support for CPM device tree configuration to 8560 ADS |
| 1944 | |
| 1945 | * Adds code to modify CPM frequencies |
| 1946 | * Cleans up the config file to #define TSEC and (for now) #undef FCC |
| 1947 | * Adds the MII command for all 8560 ADS configurations |
| 1948 | * Updates config file to provide convenience commands for booting |
| 1949 | with a device tree |
| 1950 | |
| 1951 | Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> |
| 1952 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1953 | |
| 1954 | commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 |
| 1955 | Author: Andy Fleming <afleming@freescale.com> |
| 1956 | Date: Tue May 8 17:23:02 2007 -0500 |
| 1957 | |
| 1958 | Fix Marvell 88e1145 PHY init code |
| 1959 | |
| 1960 | Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver |
| 1961 | where the reset was being done after the errata code instead of |
| 1962 | before. |
| 1963 | |
| 1964 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 1965 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 1966 | |
| 1967 | commit 5dc210dec5bace98a50b6ba905347890091a9bb0 |
| 1968 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1969 | Date: Wed Jul 11 14:52:16 2007 -0500 |
| 1970 | |
| 1971 | Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. |
| 1972 | |
| 1973 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1974 | |
| 1975 | commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 |
| 1976 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1977 | Date: Wed Jul 11 14:52:08 2007 -0500 |
| 1978 | |
| 1979 | pciauto setup bridge |
| 1980 | |
| 1981 | The P2P bridge bus numbers programmed into the device are relative to |
| 1982 | hose->first_busno. |
| 1983 | |
| 1984 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1985 | |
| 1986 | commit 571f49fa717004ca4268b4e24057efc7bf9f987b |
| 1987 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1988 | Date: Wed Jul 11 14:52:01 2007 -0500 |
| 1989 | |
| 1990 | Support PCIe extended config registers |
| 1991 | |
| 1992 | FSL PCIe block has extended cfg registers in the 100 and 400 range. |
| 1993 | For example, to read the LTSSM register: pci display <busn>.0 404 1 |
| 1994 | |
| 1995 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1996 | |
| 1997 | commit ba5feb12581bb2912ce301e4866b71f846e9fc07 |
| 1998 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 1999 | Date: Wed Jul 11 14:51:48 2007 -0500 |
| 2000 | |
| 2001 | Minor improvements to drivers/pci_auto.c |
| 2002 | |
| 2003 | - Make pciauto_{pre,post}scan_setup_bridge non-static |
| 2004 | - Added physical address display in debug messages. |
| 2005 | |
| 2006 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 2007 | |
| 2008 | commit 40e81addab7bb74d20ddf681ce9babc880a828ee |
| 2009 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 2010 | Date: Wed Jul 11 14:51:35 2007 -0500 |
| 2011 | |
| 2012 | Start pci hose scan from hose->current_busno. |
| 2013 | |
| 2014 | Ensure hose->current_busno is not less than first_busno. This fixes |
| 2015 | broken board code which leaves current_busno=0 when first_busno is |
| 2016 | greater than 0 for the cases with multiple controllers. |
| 2017 | |
| 2018 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 2019 | |
| 2020 | commit 3865b1fb7843a08ad49a6319a36415752276ff48 |
| 2021 | Author: Stefan Roese <sr@denx.de> |
| 2022 | Date: Wed Jul 11 12:13:53 2007 +0200 |
| 2023 | |
| 2024 | Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup |
| 2025 | |
| 2026 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2027 | |
Wolfgang Denk | 239f05e | 2007-07-12 01:45:34 +0200 | [diff] [blame] | 2028 | commit fa1df308926a6f70e3504c57514ef27ac31fd13a |
| 2029 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 2030 | Date: Wed Jul 11 20:11:07 2007 +0200 |
| 2031 | |
| 2032 | CM1.QP1: Support for the Schindler CM1.QP1 board. |
| 2033 | |
| 2034 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 2035 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| 2036 | |
| 2037 | commit 96e1d75be8193ca79e4215a368bf9d7f2362450f |
| 2038 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 2039 | Date: Wed Jul 11 18:39:11 2007 +0200 |
| 2040 | |
| 2041 | [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed |
| 2042 | - now the Flash ST M29W040B is supported (not tested) |
| 2043 | - fix the "led" command |
| 2044 | - fix compile error, if BUILD_DIR is used |
| 2045 | |
| 2046 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 2047 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 2048 | commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 |
| 2049 | Author: Stefan Roese <sr@denx.de> |
| 2050 | Date: Sun Jul 8 13:44:27 2007 +0200 |
| 2051 | |
| 2052 | Fix malloc problem introduced with the relocation fixup for the PPC platform |
| 2053 | |
| 2054 | The relocation fixup didn't handle the malloc pointer initialization |
| 2055 | correctly. This patch fixes this problem. Tested successfully on 4xx. |
| 2056 | The relocation fixup patches for 4xx will follow soon. |
| 2057 | |
| 2058 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2059 | |
| 2060 | commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 |
| 2061 | Author: Jon Loeliger <jdl@freescale.com> |
| 2062 | Date: Tue Jul 10 11:19:50 2007 -0500 |
| 2063 | |
| 2064 | disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. |
| 2065 | |
| 2066 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2067 | Those always evaluated TRUE, and thus were always compiled |
| 2068 | even when IDE really wasn't defined/wanted. |
| 2069 | |
| 2070 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2071 | |
| 2072 | commit ddb5d86f0215bcb6c293510c50eb050e92883b7a |
| 2073 | Author: Jon Loeliger <jdl@freescale.com> |
| 2074 | Date: Tue Jul 10 11:13:21 2007 -0500 |
| 2075 | |
| 2076 | drivers/: Remove lingering references to CFG_CMD_* symbols. |
| 2077 | |
| 2078 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2079 | Those always evaluated TRUE, and thus were always compiled |
| 2080 | even when IDE really wasn't defined/wanted. |
| 2081 | |
| 2082 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2083 | |
| 2084 | commit f40a7f3e3888b42a43674b099e5470022c8c544c |
| 2085 | Author: Jon Loeliger <jdl@freescale.com> |
| 2086 | Date: Tue Jul 10 11:07:56 2007 -0500 |
| 2087 | |
| 2088 | fs/: Remove lingering references to CFG_CMD_* symbols. |
| 2089 | |
| 2090 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2091 | Those always evaluated TRUE, and thus were always compiled |
| 2092 | even when IDE really wasn't defined/wanted. |
| 2093 | |
| 2094 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2095 | |
| 2096 | commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 |
| 2097 | Author: Jon Loeliger <jdl@freescale.com> |
| 2098 | Date: Tue Jul 10 11:05:02 2007 -0500 |
| 2099 | |
| 2100 | net/: Remove lingering references to CFG_CMD_* symbols. |
| 2101 | |
| 2102 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2103 | Those always evaluated TRUE, and thus were always compiled |
| 2104 | even when IDE really wasn't defined/wanted. |
| 2105 | |
| 2106 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2107 | |
| 2108 | commit 902531788376046da212afd1661cffb62f3daa1c |
| 2109 | Author: Jon Loeliger <jdl@freescale.com> |
| 2110 | Date: Tue Jul 10 11:02:44 2007 -0500 |
| 2111 | |
| 2112 | common/: Remove lingering references to CFG_CMD_* symbols. |
| 2113 | |
| 2114 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2115 | Those always evaluated TRUE, and thus were always compiled |
| 2116 | even when IDE really wasn't defined/wanted. |
| 2117 | |
| 2118 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2119 | |
| 2120 | commit d39b57415838c73fb0a37eca84de3c68ba990586 |
| 2121 | Author: Jon Loeliger <jdl@freescale.com> |
| 2122 | Date: Tue Jul 10 10:48:22 2007 -0500 |
| 2123 | |
| 2124 | board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. |
| 2125 | |
| 2126 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2127 | Those always evaluated TRUE, and thus were always compiled |
| 2128 | even when IDE really wasn't defined/wanted. |
| 2129 | |
| 2130 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2131 | |
| 2132 | commit 77a318545d57aefa844752465b94c7e09a3f26d0 |
| 2133 | Author: Jon Loeliger <jdl@freescale.com> |
| 2134 | Date: Tue Jul 10 10:39:10 2007 -0500 |
| 2135 | |
| 2136 | board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. |
| 2137 | |
| 2138 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| 2139 | Those always evaluated TRUE, and thus were always compiled |
| 2140 | even when IDE really wasn't defined/wanted. |
| 2141 | |
| 2142 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2143 | |
| 2144 | commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d |
| 2145 | Author: Jon Loeliger <jdl@freescale.com> |
| 2146 | Date: Tue Jul 10 10:27:39 2007 -0500 |
| 2147 | |
| 2148 | cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. |
| 2149 | |
| 2150 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2151 | |
| 2152 | commit 079a136c3588814784561d6e4856970ee82d6e2a |
| 2153 | Author: Jon Loeliger <jdl@freescale.com> |
| 2154 | Date: Tue Jul 10 10:12:10 2007 -0500 |
| 2155 | |
| 2156 | include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2157 | |
| 2158 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2159 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2160 | |
| 2161 | Remove lingering references to CFG_CMD_* symbols. |
| 2162 | |
| 2163 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2164 | |
| 2165 | commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c |
| 2166 | Author: Jon Loeliger <jdl@freescale.com> |
| 2167 | Date: Tue Jul 10 09:38:02 2007 -0500 |
| 2168 | |
| 2169 | include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2170 | |
| 2171 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2172 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2173 | |
| 2174 | Remove lingering references to CFG_CMD_* symbols. |
| 2175 | |
| 2176 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2177 | |
| 2178 | commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 |
| 2179 | Author: Jon Loeliger <jdl@freescale.com> |
| 2180 | Date: Tue Jul 10 09:29:01 2007 -0500 |
| 2181 | |
| 2182 | include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2183 | |
| 2184 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2185 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2186 | |
| 2187 | Remove lingering references to CFG_CMD_* symbols. |
| 2188 | |
| 2189 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2190 | |
| 2191 | commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a |
| 2192 | Author: Jon Loeliger <jdl@freescale.com> |
| 2193 | Date: Tue Jul 10 09:22:23 2007 -0500 |
| 2194 | |
| 2195 | include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2196 | |
| 2197 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2198 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2199 | |
| 2200 | Remove lingering references to CFG_CMD_* symbols. |
| 2201 | |
| 2202 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2203 | |
| 2204 | commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 |
| 2205 | Author: Jon Loeliger <jdl@freescale.com> |
| 2206 | Date: Tue Jul 10 09:10:49 2007 -0500 |
| 2207 | |
| 2208 | include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2209 | |
| 2210 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2211 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2212 | |
| 2213 | Remove lingering references to CFG_CMD_* symbols. |
| 2214 | |
| 2215 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2216 | |
| 2217 | commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b |
| 2218 | Author: Jon Loeliger <jdl@freescale.com> |
| 2219 | Date: Tue Jul 10 09:02:57 2007 -0500 |
| 2220 | |
| 2221 | include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| 2222 | |
| 2223 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| 2224 | used to be included but CONFIG_BOOTP_MASK was not defined. |
| 2225 | |
| 2226 | Remove lingering references to CFG_CMD_* symbols. |
| 2227 | |
| 2228 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2229 | |
| 2230 | commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 |
| 2231 | Author: Jon Loeliger <jdl@freescale.com> |
| 2232 | Date: Mon Jul 9 22:08:34 2007 -0500 |
| 2233 | |
| 2234 | Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! |
| 2235 | |
| 2236 | All of the choices for CONFIG_BOOTP_ are now documented in |
| 2237 | the README file. You must now individually select exactly |
| 2238 | the set that you want using a series of |
| 2239 | #define CONFIG_BOOTP_<x> |
| 2240 | statements in the board port config files now. |
| 2241 | |
| 2242 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2243 | |
| 2244 | commit d3b8c1a743dcd31625c99e6a44590f207eb00028 |
| 2245 | Author: Jon Loeliger <jdl@freescale.com> |
| 2246 | Date: Mon Jul 9 21:57:31 2007 -0500 |
| 2247 | |
| 2248 | include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2249 | |
| 2250 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2251 | |
| 2252 | commit 2fd90ce575b02d189cbf443c85309bcd001aa393 |
| 2253 | Author: Jon Loeliger <jdl@freescale.com> |
| 2254 | Date: Mon Jul 9 21:48:26 2007 -0500 |
| 2255 | |
| 2256 | include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2257 | |
| 2258 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2259 | |
| 2260 | commit 37d4bb70586659dedef1658ce1bed071be098aec |
| 2261 | Author: Jon Loeliger <jdl@freescale.com> |
| 2262 | Date: Mon Jul 9 21:38:02 2007 -0500 |
| 2263 | |
| 2264 | include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2265 | |
| 2266 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2267 | |
| 2268 | commit 18225e8dd1950bd6dbf35011e436db7f474c187d |
| 2269 | Author: Jon Loeliger <jdl@freescale.com> |
| 2270 | Date: Mon Jul 9 21:31:24 2007 -0500 |
| 2271 | |
| 2272 | include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2273 | |
| 2274 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2275 | |
| 2276 | commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d |
| 2277 | Author: Jon Loeliger <jdl@freescale.com> |
| 2278 | Date: Mon Jul 9 21:24:19 2007 -0500 |
| 2279 | |
| 2280 | include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2281 | |
| 2282 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2283 | |
| 2284 | commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f |
| 2285 | Author: Jon Loeliger <jdl@freescale.com> |
| 2286 | Date: Mon Jul 9 21:16:53 2007 -0500 |
| 2287 | |
| 2288 | include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| 2289 | |
| 2290 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2291 | |
| 2292 | commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 |
| 2293 | Author: Jon Loeliger <jdl@freescale.com> |
| 2294 | Date: Mon Jul 9 19:12:30 2007 -0500 |
| 2295 | |
| 2296 | Retire CONFIG_COMMANDS finally. |
| 2297 | Strip old CFG_CMD_* symbols out. |
| 2298 | |
| 2299 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2300 | |
| 2301 | commit b5501f7d720fed99ab0b42c83f5dea52868ce007 |
| 2302 | Author: Jon Loeliger <jdl@freescale.com> |
| 2303 | Date: Mon Jul 9 19:10:03 2007 -0500 |
| 2304 | |
| 2305 | Update README.* to reference new CONFIG_CMD_* names now. |
| 2306 | |
| 2307 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2308 | |
| 2309 | commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 |
| 2310 | Author: Jon Loeliger <jdl@freescale.com> |
| 2311 | Date: Mon Jul 9 19:06:00 2007 -0500 |
| 2312 | |
| 2313 | cpu/m*: Remove obsolete references to CONFIG_COMMANDS |
| 2314 | |
| 2315 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2316 | |
| 2317 | commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa |
| 2318 | Author: Jon Loeliger <jdl@freescale.com> |
| 2319 | Date: Mon Jul 9 18:57:22 2007 -0500 |
| 2320 | |
| 2321 | cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS |
| 2322 | |
| 2323 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2324 | |
| 2325 | commit ab3abcbabd840928fb1eb5122118ca466b5e5013 |
| 2326 | Author: Jon Loeliger <jdl@freescale.com> |
| 2327 | Date: Mon Jul 9 18:45:16 2007 -0500 |
| 2328 | |
| 2329 | board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS |
| 2330 | |
| 2331 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2332 | |
| 2333 | commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 |
| 2334 | Author: Jon Loeliger <jdl@freescale.com> |
| 2335 | Date: Mon Jul 9 18:38:39 2007 -0500 |
| 2336 | |
| 2337 | board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS |
| 2338 | |
| 2339 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2340 | |
| 2341 | commit c508a4cefd8a953fc64957650506a035e6e3d9d1 |
| 2342 | Author: Jon Loeliger <jdl@freescale.com> |
| 2343 | Date: Mon Jul 9 18:31:28 2007 -0500 |
| 2344 | |
| 2345 | board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS |
| 2346 | |
| 2347 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2348 | |
| 2349 | commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 |
| 2350 | Author: Jon Loeliger <jdl@freescale.com> |
| 2351 | Date: Mon Jul 9 18:24:55 2007 -0500 |
| 2352 | |
| 2353 | board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS |
| 2354 | |
| 2355 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2356 | |
| 2357 | commit fcec2eb93e126400009729328e797f12bc94f1fd |
| 2358 | Author: Jon Loeliger <jdl@freescale.com> |
| 2359 | Date: Mon Jul 9 18:19:09 2007 -0500 |
| 2360 | |
| 2361 | board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS |
| 2362 | |
| 2363 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2364 | |
| 2365 | commit a593814f2be0c9cdc3133cd550b167b8a988328f |
| 2366 | Author: Jon Loeliger <jdl@freescale.com> |
| 2367 | Date: Mon Jul 9 18:10:50 2007 -0500 |
| 2368 | |
| 2369 | rtc/: Remove obsolete references to CONFIG_COMMANDS |
| 2370 | |
| 2371 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2372 | |
| 2373 | commit 67350568f9d46e66c21829f3513b3db0caeb948b |
| 2374 | Author: Jon Loeliger <jdl@freescale.com> |
| 2375 | Date: Mon Jul 9 18:05:38 2007 -0500 |
| 2376 | |
| 2377 | lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS |
| 2378 | |
| 2379 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2380 | |
| 2381 | commit 7def6b34f910f08d7ef0a14646da067719237ca2 |
| 2382 | Author: Jon Loeliger <jdl@freescale.com> |
| 2383 | Date: Mon Jul 9 18:02:11 2007 -0500 |
| 2384 | |
| 2385 | lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS |
| 2386 | |
| 2387 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2388 | |
| 2389 | commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb |
| 2390 | Author: Jon Loeliger <jdl@freescale.com> |
| 2391 | Date: Mon Jul 9 17:56:50 2007 -0500 |
| 2392 | |
| 2393 | fs/: Remove obsolete references to CONFIG_COMMANDS |
| 2394 | |
| 2395 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2396 | |
| 2397 | commit c91898bbc505aff3e12a807af88e76da18efb7ee |
| 2398 | Author: Jon Loeliger <jdl@freescale.com> |
| 2399 | Date: Mon Jul 9 17:46:09 2007 -0500 |
| 2400 | |
| 2401 | tools/: Remove obsolete references to CONFIG_COMMANDS |
| 2402 | |
| 2403 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2404 | |
| 2405 | commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 |
| 2406 | Author: Jon Loeliger <jdl@freescale.com> |
| 2407 | Date: Mon Jul 9 17:45:14 2007 -0500 |
| 2408 | |
| 2409 | net/: Remove obsolete references to CONFIG_COMMANDS |
| 2410 | |
| 2411 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2412 | |
| 2413 | commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 |
| 2414 | Author: Jon Loeliger <jdl@freescale.com> |
| 2415 | Date: Mon Jul 9 17:39:42 2007 -0500 |
| 2416 | |
| 2417 | drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS |
| 2418 | |
| 2419 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2420 | |
| 2421 | commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b |
| 2422 | Author: Jon Loeliger <jdl@freescale.com> |
| 2423 | Date: Mon Jul 9 17:30:01 2007 -0500 |
| 2424 | |
| 2425 | drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS |
| 2426 | |
| 2427 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2428 | |
| 2429 | commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 |
| 2430 | Author: Jon Loeliger <jdl@freescale.com> |
| 2431 | Date: Mon Jul 9 17:22:37 2007 -0500 |
| 2432 | |
| 2433 | disk/: Remove obsolete references to CONFIG_COMMANDS |
| 2434 | |
| 2435 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2436 | |
| 2437 | commit 639221c76c88215bd55af83ad174fc30d1940f8f |
| 2438 | Author: Jon Loeliger <jdl@freescale.com> |
| 2439 | Date: Mon Jul 9 17:15:49 2007 -0500 |
| 2440 | |
| 2441 | include/: Remove obsolete references to CONFIG_COMMANDS |
| 2442 | Mostly removed from comments here. |
| 2443 | |
| 2444 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2445 | |
Wolfgang Denk | 239f05e | 2007-07-12 01:45:34 +0200 | [diff] [blame] | 2446 | commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 |
| 2447 | Author: Wolfgang Denk <wd@denx.de> |
| 2448 | Date: Tue Jul 10 00:01:28 2007 +0200 |
| 2449 | |
| 2450 | Coding style cleanup; update CHANGELOG. |
| 2451 | |
| 2452 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 2453 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 2454 | commit c8603cfbd4573379a6076c9c208545ba2bbf019a |
| 2455 | Author: Stefan Roese <sr@denx.de> |
| 2456 | Date: Mon Jul 9 11:00:24 2007 +0200 |
| 2457 | |
| 2458 | Small coding style cleanup |
| 2459 | |
| 2460 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2461 | |
| 2462 | commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc |
| 2463 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2464 | Date: Mon Jul 9 10:10:08 2007 +0200 |
| 2465 | |
| 2466 | Migrate esd 405EP boards to new NAND subsystem |
| 2467 | |
| 2468 | Remove unused CFG_NAND_LEGACY define |
| 2469 | |
| 2470 | These boards to not have NAND. |
| 2471 | |
| 2472 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2473 | |
| 2474 | commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 |
| 2475 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2476 | Date: Mon Jul 9 10:10:06 2007 +0200 |
| 2477 | |
| 2478 | Migrate esd 405EP boards to new NAND subsystem |
| 2479 | |
| 2480 | Migrate esd 405EP boards to new NAND subsystem |
| 2481 | |
| 2482 | -cleanup |
| 2483 | -use correct io accessors (in/out_be32()) |
| 2484 | |
| 2485 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2486 | |
| 2487 | commit e09f7ab5749c345f924da272bea0521a73af5b11 |
| 2488 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2489 | Date: Mon Jul 9 10:10:04 2007 +0200 |
| 2490 | |
| 2491 | Migrate esd 405EP boards to new NAND subsystem |
| 2492 | |
| 2493 | This patch prepares the migration from the legacy NAND driver |
| 2494 | to U-Boot's new NAND subsystem for esd boards. |
| 2495 | |
| 2496 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 2497 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 2498 | commit c3517f919d0f61650cf3027fd4faf0f631142f6c |
| 2499 | Author: Jon Loeliger <jdl@freescale.com> |
| 2500 | Date: Sun Jul 8 18:10:08 2007 -0500 |
| 2501 | |
| 2502 | common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS |
| 2503 | |
| 2504 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2505 | |
| 2506 | commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 |
| 2507 | Author: Jon Loeliger <jdl@freescale.com> |
| 2508 | Date: Sun Jul 8 18:05:39 2007 -0500 |
| 2509 | |
| 2510 | common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. |
| 2511 | |
| 2512 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2513 | |
| 2514 | commit c76fe47425afc7d5d670ff0539823c85d65d9c42 |
| 2515 | Author: Jon Loeliger <jdl@freescale.com> |
| 2516 | Date: Sun Jul 8 18:02:23 2007 -0500 |
| 2517 | |
| 2518 | common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. |
| 2519 | |
| 2520 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2521 | |
| 2522 | commit baa26db4113679b80970ff447d91cc10217742a6 |
| 2523 | Author: Jon Loeliger <jdl@freescale.com> |
| 2524 | Date: Sun Jul 8 17:51:39 2007 -0500 |
| 2525 | |
| 2526 | common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. |
| 2527 | |
| 2528 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2529 | |
| 2530 | commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd |
| 2531 | Author: Jon Loeliger <jdl@freescale.com> |
| 2532 | Date: Sun Jul 8 17:02:01 2007 -0500 |
| 2533 | |
| 2534 | Clear up confusion over the CMD_POST and POST_DIAG mess. |
| 2535 | |
| 2536 | For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG |
| 2537 | when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. |
| 2538 | Clear this mess up some. |
| 2539 | |
| 2540 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2541 | |
| 2542 | commit b3631487105a57ab7cbadfc26efbaf9676275018 |
| 2543 | Author: Jon Loeliger <jdl@freescale.com> |
| 2544 | Date: Sun Jul 8 15:45:08 2007 -0500 |
| 2545 | |
| 2546 | Remove references to the old cmd_confdefs.h include file. |
| 2547 | |
| 2548 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2549 | |
| 2550 | commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 |
| 2551 | Author: Jon Loeliger <jdl@freescale.com> |
| 2552 | Date: Sun Jul 8 15:42:59 2007 -0500 |
| 2553 | |
| 2554 | include/configs: Catch some CONFIG_CMD_* conversion stragglers. |
| 2555 | |
| 2556 | Use new CONFIG_CMD_* in lwmon5.h board config file. |
| 2557 | Fix CONFIG_CMD_* typo braindamage in omap1510inn.h |
| 2558 | |
| 2559 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2560 | |
| 2561 | commit a5562901661bd428f7e5feb333f796372cb81019 |
| 2562 | Author: Jon Loeliger <jdl@freescale.com> |
| 2563 | Date: Sun Jul 8 15:31:57 2007 -0500 |
| 2564 | |
| 2565 | include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. |
| 2566 | |
| 2567 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2568 | |
| 2569 | commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e |
| 2570 | Author: Jon Loeliger <jdl@freescale.com> |
| 2571 | Date: Sun Jul 8 15:02:44 2007 -0500 |
| 2572 | |
| 2573 | include/configs: Use new CONFIG_CMD_* in various S* named board config files. |
| 2574 | |
| 2575 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2576 | |
| 2577 | commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 |
| 2578 | Author: Jon Loeliger <jdl@freescale.com> |
| 2579 | Date: Sun Jul 8 15:12:40 2007 -0500 |
| 2580 | |
| 2581 | include/configs: Use new CONFIG_CMD_* in various R* named board config files. |
| 2582 | |
| 2583 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2584 | |
| 2585 | commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f |
| 2586 | Author: Jon Loeliger <jdl@freescale.com> |
| 2587 | Date: Sun Jul 8 14:55:07 2007 -0500 |
| 2588 | |
| 2589 | include/configs: Use new CONFIG_CMD_* in various Q* named board config files. |
| 2590 | |
| 2591 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2592 | |
| 2593 | commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e |
| 2594 | Author: Jon Loeliger <jdl@freescale.com> |
| 2595 | Date: Sun Jul 8 14:49:44 2007 -0500 |
| 2596 | |
| 2597 | include/configs: Use new CONFIG_CMD_* in various P* named board config files. |
| 2598 | |
| 2599 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2600 | |
| 2601 | commit e18a1061a8630cb67995fdf99afd3fb50d1b187d |
| 2602 | Author: Jon Loeliger <jdl@freescale.com> |
| 2603 | Date: Sun Jul 8 14:21:43 2007 -0500 |
| 2604 | |
| 2605 | include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. |
| 2606 | |
| 2607 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2608 | |
| 2609 | commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 |
| 2610 | Author: Jon Loeliger <jdl@freescale.com> |
| 2611 | Date: Sun Jul 8 14:14:17 2007 -0500 |
| 2612 | |
| 2613 | include/configs: Use new CONFIG_CMD_* in various M* named board config files. |
| 2614 | |
| 2615 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2616 | |
| 2617 | commit 348f258f24253433e4a2302a0bbceb6740a67246 |
| 2618 | Author: Jon Loeliger <jdl@freescale.com> |
| 2619 | Date: Sun Jul 8 13:46:18 2007 -0500 |
| 2620 | |
| 2621 | include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. |
| 2622 | |
| 2623 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2624 | |
| 2625 | commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a |
| 2626 | Author: Jon Loeliger <jdl@freescale.com> |
| 2627 | Date: Sun Jul 8 10:09:35 2007 -0500 |
| 2628 | |
| 2629 | include/configs: Use new CONFIG_CMD_* in various H* named board config files. |
| 2630 | |
| 2631 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2632 | |
| 2633 | commit 60a0876b5106b34220e459c208bbf648073306c0 |
| 2634 | Author: Jon Loeliger <jdl@freescale.com> |
| 2635 | Date: Sat Jul 7 21:04:26 2007 -0500 |
| 2636 | |
| 2637 | include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. |
| 2638 | |
| 2639 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2640 | |
| 2641 | commit dcaa71562826a2466e894c868d132509dcda8444 |
| 2642 | Author: Jon Loeliger <jdl@freescale.com> |
| 2643 | Date: Sat Jul 7 20:56:05 2007 -0500 |
| 2644 | |
| 2645 | include/configs: Use new CONFIG_CMD_* in various E* named board config files. |
| 2646 | |
| 2647 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2648 | |
| 2649 | commit 3c3227f3c737502311b25b72084573901cbbf17d |
| 2650 | Author: Jon Loeliger <jdl@freescale.com> |
| 2651 | Date: Sat Jul 7 20:40:43 2007 -0500 |
| 2652 | |
| 2653 | include/configs: Use new CONFIG_CMD_* in various D* named board config files. |
| 2654 | |
| 2655 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2656 | |
| 2657 | commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c |
| 2658 | Author: Jon Loeliger <jdl@freescale.com> |
| 2659 | Date: Thu Jul 5 19:52:35 2007 -0500 |
| 2660 | |
| 2661 | include/configs: Use new CONFIG_CMD_* in various C* named board config files. |
| 2662 | |
| 2663 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2664 | |
| 2665 | commit de8b2a6e33298dcdb10bdda48db25e53c3089eba |
| 2666 | Author: Jon Loeliger <jdl@freescale.com> |
| 2667 | Date: Thu Jul 5 19:32:07 2007 -0500 |
| 2668 | |
| 2669 | include/configs: Use new CONFIG_CMD_* in various B* named board config files. |
| 2670 | |
| 2671 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2672 | |
| 2673 | commit 498ff9a228485bd4b9f23d066bada268f9add1dd |
| 2674 | Author: Jon Loeliger <jdl@freescale.com> |
| 2675 | Date: Thu Jul 5 19:13:52 2007 -0500 |
| 2676 | |
| 2677 | include/configs: Use new CONFIG_CMD_* in various A* named board config files. |
| 2678 | |
| 2679 | Since ADS860.h includes "board/fads/fads.h" with ramifications |
| 2680 | on the CONFIG_COMMAND treatment, it too has to be adjusted to |
| 2681 | exclude already configured commands in this same commit. |
| 2682 | |
| 2683 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2684 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 2685 | commit 10e038932f22ee80ebd53de312531e70e6590a2f |
| 2686 | Author: Thomas Knobloch <knobloch@siemens.com> |
| 2687 | Date: Fri Jul 6 14:58:39 2007 +0200 |
| 2688 | |
| 2689 | [NAND] Bad block skipping for command nboot |
| 2690 | |
| 2691 | The old implementation of command nboot does not support reading the image from |
| 2692 | NAND flash with skipping of bad blocks. The patch implements a new version of |
| 2693 | the nboot command: by calling nboot.jffs2 from the u-boot command line the |
| 2694 | command will load the image from NAND flash with respect to bad blocks (by using |
| 2695 | nand_read_opts()). This is similar to e.g. the NAND read command: "nand |
| 2696 | read.jffs2 ...". |
| 2697 | |
| 2698 | Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| 2699 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2700 | |
| 2701 | commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f |
| 2702 | Author: Stefan Roese <sr@denx.de> |
| 2703 | Date: Fri Jul 6 12:26:51 2007 +0200 |
| 2704 | |
| 2705 | ppc4xx: Update lwmon5 default environment |
| 2706 | |
| 2707 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2708 | |
| 2709 | commit 5d187430a055d62f17ca84d75e7245439d1f7e75 |
| 2710 | Author: Stefan Roese <sr@denx.de> |
| 2711 | Date: Fri Jul 6 11:48:24 2007 +0200 |
| 2712 | |
| 2713 | ppc4xx: Update lwmon5 board |
| 2714 | |
| 2715 | Add unlock=yes environment variable to default variables to unlock |
| 2716 | the CFI flash by default. |
| 2717 | |
| 2718 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2719 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 2720 | commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e |
| 2721 | Author: Stefan Roese <sr@denx.de> |
| 2722 | Date: Fri Jul 6 09:45:47 2007 +0200 |
| 2723 | |
| 2724 | Fix problem with get/setdcr commands introduced by cfg patches |
| 2725 | |
| 2726 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 2727 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 2728 | commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f |
| 2729 | Author: Wolfgang Denk <wd@denx.de> |
| 2730 | Date: Fri Jul 6 02:50:19 2007 +0200 |
| 2731 | |
| 2732 | Code cleanup and default config update for STC GP3 SSA board. |
| 2733 | |
| 2734 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 2735 | |
Wolfgang Denk | 5728be3 | 2007-08-06 01:01:49 +0200 | [diff] [blame] | 2736 | commit e4dbe1b215f5c6c462e76909d240bd96472b84de |
| 2737 | Author: Wolfgang Denk <wd@denx.de> |
| 2738 | Date: Thu Jul 5 17:56:27 2007 +0200 |
| 2739 | |
| 2740 | Fixing some typos etc. introduced mainly by cfg patches. |
| 2741 | |
| 2742 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 2743 | |
| 2744 | commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd |
| 2745 | Author: Wolfgang Denk <wd@denx.de> |
| 2746 | Date: Thu Jul 5 11:12:16 2007 +0200 |
| 2747 | |
| 2748 | Minor coding style cleanup. Update CHANGELOG. |
| 2749 | |
Wolfgang Denk | b6b4684 | 2007-07-05 11:12:16 +0200 | [diff] [blame] | 2750 | commit dca3b3d6d6396b67e5e84af53452164923c73443 |
| 2751 | Author: Jon Loeliger <jdl@jdl.com> |
| 2752 | Date: Wed Jul 4 22:33:46 2007 -0500 |
| 2753 | |
| 2754 | include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. |
| 2755 | |
| 2756 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2757 | |
| 2758 | commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 |
| 2759 | Author: Jon Loeliger <jdl@jdl.com> |
| 2760 | Date: Wed Jul 4 22:33:38 2007 -0500 |
| 2761 | |
| 2762 | include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. |
| 2763 | |
| 2764 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2765 | |
| 2766 | commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 |
| 2767 | Author: Jon Loeliger <jdl@jdl.com> |
| 2768 | Date: Wed Jul 4 22:33:30 2007 -0500 |
| 2769 | |
| 2770 | include/configs: Use new CONFIG_CMD_* in various s* named board config files. |
| 2771 | |
| 2772 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2773 | |
| 2774 | commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 |
| 2775 | Author: Jon Loeliger <jdl@jdl.com> |
| 2776 | Date: Wed Jul 4 22:33:23 2007 -0500 |
| 2777 | |
| 2778 | include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. |
| 2779 | |
| 2780 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2781 | |
| 2782 | commit 26a34560d56a9df5bc2ae23525d9229736134757 |
| 2783 | Author: Jon Loeliger <jdl@jdl.com> |
| 2784 | Date: Wed Jul 4 22:33:17 2007 -0500 |
| 2785 | |
| 2786 | include/configs: Use new CONFIG_CMD_* in various p* named board config files. |
| 2787 | |
| 2788 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2789 | |
| 2790 | commit a5cb23092a7d31490a33d4ec871468b63babfa3c |
| 2791 | Author: Jon Loeliger <jdl@jdl.com> |
| 2792 | Date: Wed Jul 4 22:33:13 2007 -0500 |
| 2793 | |
| 2794 | include/configs: Use new CONFIG_CMD_* in various o* named board config files. |
| 2795 | |
| 2796 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2797 | |
| 2798 | commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 |
| 2799 | Author: Jon Loeliger <jdl@jdl.com> |
| 2800 | Date: Wed Jul 4 22:33:07 2007 -0500 |
| 2801 | |
| 2802 | include/configs: Use new CONFIG_CMD_* in various n* named board config files. |
| 2803 | |
| 2804 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2805 | |
| 2806 | commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 |
| 2807 | Author: Jon Loeliger <jdl@jdl.com> |
| 2808 | Date: Wed Jul 4 22:33:01 2007 -0500 |
| 2809 | |
| 2810 | include/configs: Use new CONFIG_CMD_* in various m* named board config files. |
| 2811 | |
| 2812 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2813 | |
| 2814 | commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 |
| 2815 | Author: Jon Loeliger <jdl@jdl.com> |
| 2816 | Date: Wed Jul 4 22:32:57 2007 -0500 |
| 2817 | |
| 2818 | include/configs: Use new CONFIG_CMD_* in various l* named board config files. |
| 2819 | |
| 2820 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2821 | |
| 2822 | commit bc234c129fa04fb9fa33530930e5cbc6084cd47a |
| 2823 | Author: Jon Loeliger <jdl@jdl.com> |
| 2824 | Date: Wed Jul 4 22:32:51 2007 -0500 |
| 2825 | |
| 2826 | include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. |
| 2827 | |
| 2828 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2829 | |
| 2830 | commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 |
| 2831 | Author: Jon Loeliger <jdl@jdl.com> |
| 2832 | Date: Wed Jul 4 22:32:32 2007 -0500 |
| 2833 | |
| 2834 | include/configs: Use new CONFIG_CMD_* in various i* named board config files. |
| 2835 | |
| 2836 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2837 | |
| 2838 | commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 |
| 2839 | Author: Jon Loeliger <jdl@jdl.com> |
| 2840 | Date: Wed Jul 4 22:32:25 2007 -0500 |
| 2841 | |
| 2842 | include/configs: Use new CONFIG_CMD_* in various h* named board config files. |
| 2843 | |
| 2844 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2845 | |
| 2846 | commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 |
| 2847 | Author: Jon Loeliger <jdl@jdl.com> |
| 2848 | Date: Wed Jul 4 22:32:19 2007 -0500 |
| 2849 | |
| 2850 | include/configs: Use new CONFIG_CMD_* in various g* named board config files. |
| 2851 | |
| 2852 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2853 | |
| 2854 | commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e |
| 2855 | Author: Jon Loeliger <jdl@jdl.com> |
| 2856 | Date: Wed Jul 4 22:32:10 2007 -0500 |
| 2857 | |
| 2858 | include/configs: Use new CONFIG_CMD_* in various e* named board config files. |
| 2859 | |
| 2860 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2861 | |
| 2862 | commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 |
| 2863 | Author: Jon Loeliger <jdl@jdl.com> |
| 2864 | Date: Wed Jul 4 22:32:03 2007 -0500 |
| 2865 | |
| 2866 | include/configs: Use new CONFIG_CMD_* in various d* named board config files. |
| 2867 | |
| 2868 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2869 | |
| 2870 | commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b |
| 2871 | Author: Jon Loeliger <jdl@jdl.com> |
| 2872 | Date: Wed Jul 4 22:31:56 2007 -0500 |
| 2873 | |
| 2874 | include/configs: Use new CONFIG_CMD_* in various c* named board config files. |
| 2875 | |
| 2876 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2877 | |
| 2878 | commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 |
| 2879 | Author: Jon Loeliger <jdl@jdl.com> |
| 2880 | Date: Wed Jul 4 22:31:49 2007 -0500 |
| 2881 | |
| 2882 | include/configs: Use new CONFIG_CMD_* in various b* named board config files. |
| 2883 | |
| 2884 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2885 | |
| 2886 | commit 0b361c916617aff79e647b40f0e43361e0bbaccf |
| 2887 | Author: Jon Loeliger <jdl@jdl.com> |
| 2888 | Date: Wed Jul 4 22:31:42 2007 -0500 |
| 2889 | |
| 2890 | include/configs: Use new CONFIG_CMD_* in various a* named board config files. |
| 2891 | |
| 2892 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2893 | |
| 2894 | commit b730cda82e362df6a22f4c59c0a9b97e885b1014 |
| 2895 | Author: Jon Loeliger <jdl@jdl.com> |
| 2896 | Date: Wed Jul 4 22:31:35 2007 -0500 |
| 2897 | |
| 2898 | include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. |
| 2899 | |
| 2900 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2901 | |
| 2902 | commit d794cfefead5fc177cf4f41164e80382e9c9484a |
| 2903 | Author: Jon Loeliger <jdl@jdl.com> |
| 2904 | Date: Wed Jul 4 22:31:15 2007 -0500 |
| 2905 | |
| 2906 | include/configs: Use new CONFIG_CMD_* in various 5200 board config files. |
| 2907 | |
| 2908 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2909 | |
| 2910 | commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c |
| 2911 | Author: Jon Loeliger <jdl@jdl.com> |
| 2912 | Date: Wed Jul 4 22:31:07 2007 -0500 |
| 2913 | |
| 2914 | include/configs: Use new CONFIG_CMD_* in STx board config files. |
| 2915 | |
| 2916 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2917 | |
| 2918 | commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc |
| 2919 | Author: Jon Loeliger <jdl@jdl.com> |
| 2920 | Date: Wed Jul 4 22:30:58 2007 -0500 |
| 2921 | |
| 2922 | include/configs: Use new CONFIG_CMD_* in sbc* board config files. |
| 2923 | |
| 2924 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2925 | |
| 2926 | commit 2694690e285acaa34922f55f4b5ae030da60c55a |
| 2927 | Author: Jon Loeliger <jdl@jdl.com> |
| 2928 | Date: Wed Jul 4 22:30:50 2007 -0500 |
| 2929 | |
| 2930 | include/configs: Use new CONFIG_CMD_* in TQM board config files. |
| 2931 | |
| 2932 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2933 | |
| 2934 | commit 1cc4c458329765b58e584a19821e796b3c10e976 |
| 2935 | Author: Jon Loeliger <jdl@jdl.com> |
| 2936 | Date: Wed Jul 4 22:30:28 2007 -0500 |
| 2937 | |
| 2938 | include/configs: Use new CONFIG_CMD_* in 82xx board config files. |
| 2939 | |
| 2940 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2941 | |
| 2942 | commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e |
| 2943 | Author: Jon Loeliger <jdl@jdl.com> |
| 2944 | Date: Wed Jul 4 22:30:06 2007 -0500 |
| 2945 | |
| 2946 | include/configs: Use new CONFIG_CMD_* in 83xx board config files. |
| 2947 | |
| 2948 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2949 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 2950 | commit b44896215a09c60fa40cae906f7ed207bbc2c492 |
| 2951 | Author: Sergei Poselenov <sposelenov@emcraft.com> |
| 2952 | Date: Thu Jul 5 08:17:37 2007 +0200 |
| 2953 | |
| 2954 | Merged POST framework with the current TOT. |
| 2955 | |
| 2956 | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| 2957 | |
Wolfgang Denk | b6b4684 | 2007-07-05 11:12:16 +0200 | [diff] [blame] | 2958 | commit b24629fa377214d63bb40d1360e354b6d3e4af56 |
| 2959 | Author: Jon Loeliger <jdl@jdl.com> |
| 2960 | Date: Wed Jun 13 13:23:15 2007 -0500 |
| 2961 | |
| 2962 | mpc86xx: Remove old CFG_CMD_* references. |
| 2963 | |
| 2964 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2965 | |
| 2966 | commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a |
| 2967 | Author: Jon Loeliger <jdl@jdl.com> |
| 2968 | Date: Wed Jun 13 13:22:54 2007 -0500 |
| 2969 | |
| 2970 | Add MPC8568MDS to MAKEALL 85xx target. |
| 2971 | |
| 2972 | It was missing from the original port submission. |
| 2973 | |
| 2974 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2975 | |
| 2976 | commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 |
| 2977 | Author: Jon Loeliger <jdl@jdl.com> |
| 2978 | Date: Wed Jun 13 13:22:08 2007 -0500 |
| 2979 | |
| 2980 | include/configs: Use new CONFIG_CMD_* in 85xx board config files. |
| 2981 | |
| 2982 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2983 | |
| 2984 | commit 56b304ac2091689506088a9ae67f63fd6300cf16 |
| 2985 | Author: Jon Loeliger <jdl@jdl.com> |
| 2986 | Date: Wed Jun 13 13:21:37 2007 -0500 |
| 2987 | |
| 2988 | Fix #if typo in CONFIG_CMD_* changes. |
| 2989 | |
| 2990 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 2991 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 2992 | commit f780b83316d9af1f61d71cc88b1917b387b9b995 |
| 2993 | Author: Niklaus Giger <niklausgiger@gmx.ch> |
| 2994 | Date: Wed Jun 27 18:11:38 2007 +0200 |
| 2995 | |
| 2996 | resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX |
| 2997 | |
| 2998 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| 2999 | |
| 3000 | commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 |
| 3001 | Author: Stefan Roese <sr@denx.de> |
| 3002 | Date: Wed Jul 4 10:06:30 2007 +0200 |
| 3003 | |
| 3004 | ppc4xx: Update lwmon5 board |
| 3005 | |
| 3006 | - Add optional ECC generation routine to preserve existing |
| 3007 | RAM values. This is needed for the Linux log-buffer support |
| 3008 | - Add optional DDR2 setup with CL=4 |
| 3009 | - GPIO50 not used anymore |
| 3010 | - Lime register setup added |
| 3011 | |
| 3012 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3013 | |
Wolfgang Denk | b6b4684 | 2007-07-05 11:12:16 +0200 | [diff] [blame] | 3014 | commit 6810a34677dbc446334f5e451f1682426dd33b49 |
| 3015 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3016 | Date: Tue Jul 3 00:17:28 2007 -0600 |
| 3017 | |
| 3018 | Fix Makefile to use $(MKCONFIG) macro for all board ports |
| 3019 | |
| 3020 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3021 | |
| 3022 | commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 |
| 3023 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3024 | Date: Tue Jul 3 00:17:28 2007 -0600 |
| 3025 | |
| 3026 | Fix Makefile to use $(MKCONFIG) macro for all board ports |
| 3027 | |
| 3028 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3029 | |
| 3030 | commit 057004f4a4863554d56cc56268bfa7c7d9738e27 |
| 3031 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3032 | Date: Tue Jul 3 00:34:49 2007 -0600 |
| 3033 | |
| 3034 | Correct fixup relocation for mpc83xx |
| 3035 | |
| 3036 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3037 | |
| 3038 | commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 |
| 3039 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3040 | Date: Tue Jul 3 00:34:44 2007 -0600 |
| 3041 | |
| 3042 | Correct fixup relocation for mpc8260 |
| 3043 | |
| 3044 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3045 | |
| 3046 | commit f3a52fe05923935db86985daf9438e2f70ac39aa |
| 3047 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3048 | Date: Tue Jul 3 00:34:39 2007 -0600 |
| 3049 | |
| 3050 | Correct fixup relocation for mpc824x |
| 3051 | |
| 3052 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3053 | |
| 3054 | commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 |
| 3055 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3056 | Date: Tue Jul 3 00:34:34 2007 -0600 |
| 3057 | |
| 3058 | Correct fixup relocation for mpc8220 |
| 3059 | |
| 3060 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3061 | |
| 3062 | commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 |
| 3063 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3064 | Date: Tue Jul 3 00:34:29 2007 -0600 |
| 3065 | |
| 3066 | Correct fixup relocation for MPC5xxx |
| 3067 | |
| 3068 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3069 | |
| 3070 | commit 3649cd99ba815b6601868735765602f00ef3692b |
| 3071 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3072 | Date: Tue Jul 3 00:34:24 2007 -0600 |
| 3073 | |
| 3074 | Correct relocation fixup for mpc5xx |
| 3075 | |
| 3076 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3077 | |
| 3078 | commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 |
| 3079 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3080 | Date: Tue Jul 3 00:34:19 2007 -0600 |
| 3081 | |
| 3082 | Don't set gd->reloc_off if relocation of .fixup works correctly |
| 3083 | |
| 3084 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3085 | |
| 3086 | commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 |
| 3087 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3088 | Date: Tue Jul 3 00:34:14 2007 -0600 |
| 3089 | |
| 3090 | Remove obsolete mpc83xx linker scripts |
| 3091 | |
| 3092 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3093 | |
| 3094 | commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b |
| 3095 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3096 | Date: Tue Jul 3 00:34:09 2007 -0600 |
| 3097 | |
| 3098 | Consolidate mpc8260 linker scripts |
| 3099 | |
| 3100 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3101 | |
| 3102 | commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 |
| 3103 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3104 | Date: Tue Jul 3 00:34:04 2007 -0600 |
| 3105 | |
| 3106 | Remove obsolete mpc824x linker scripts |
| 3107 | |
| 3108 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3109 | |
| 3110 | commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 |
| 3111 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3112 | Date: Tue Jul 3 00:33:59 2007 -0600 |
| 3113 | |
| 3114 | Remove obsolete mpc824x linker scripts (3 of 4) |
| 3115 | |
| 3116 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3117 | |
| 3118 | commit a71c084f3ac7fedf144537db2b2da47323068833 |
| 3119 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3120 | Date: Tue Jul 3 00:33:53 2007 -0600 |
| 3121 | |
| 3122 | Remove obsolete mpc824x linker scripts (2 of 4) |
| 3123 | |
| 3124 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3125 | |
| 3126 | commit f670a15468d1365241d40022b9408e1004181f5e |
| 3127 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3128 | Date: Tue Jul 3 00:33:48 2007 -0600 |
| 3129 | |
| 3130 | Remove obsolete mpc824x linker scripts (1 of 4) |
| 3131 | |
| 3132 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3133 | |
| 3134 | commit 09555bd45a04c0e54f172528d21bc18896550d28 |
| 3135 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3136 | Date: Tue Jul 3 00:33:43 2007 -0600 |
| 3137 | |
| 3138 | Remove obsolete mpc8220 linker scripts |
| 3139 | |
| 3140 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3141 | |
| 3142 | commit 5efb992f046e51225c93d52f80fecbe433abd789 |
| 3143 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3144 | Date: Tue Jul 3 00:33:38 2007 -0600 |
| 3145 | |
| 3146 | Remove obsolete mpc5xxx linker scripts (3 of 3) |
| 3147 | |
| 3148 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3149 | |
| 3150 | commit 07c13dfef65b31647e69d8b61daa1eec598add1a |
| 3151 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3152 | Date: Tue Jul 3 00:33:33 2007 -0600 |
| 3153 | |
| 3154 | Remove obsolete mpc5xxx linker scripts (2 of 3) |
| 3155 | |
| 3156 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3157 | |
| 3158 | commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 |
| 3159 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3160 | Date: Tue Jul 3 00:33:28 2007 -0600 |
| 3161 | |
| 3162 | Remove obsolete mpc5xxx linker scripts (1 of 3) |
| 3163 | |
| 3164 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3165 | |
| 3166 | commit b7d8e05f8675249b5f208aa73babeed384a4519d |
| 3167 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3168 | Date: Tue Jul 3 00:33:23 2007 -0600 |
| 3169 | |
| 3170 | Remove obsolete mpc5xx linker scripts |
| 3171 | |
| 3172 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3173 | |
| 3174 | commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 |
| 3175 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3176 | Date: Tue Jul 3 00:33:18 2007 -0600 |
| 3177 | |
| 3178 | Consolidate mpc83xx linker scripts |
| 3179 | |
| 3180 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3181 | |
| 3182 | commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 |
| 3183 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3184 | Date: Tue Jul 3 00:33:13 2007 -0600 |
| 3185 | |
| 3186 | Consolidate mpc8260 linker scripts |
| 3187 | |
| 3188 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3189 | |
| 3190 | commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 |
| 3191 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3192 | Date: Tue Jul 3 00:33:08 2007 -0600 |
| 3193 | |
| 3194 | Consolidate mpc824x linker scripts |
| 3195 | |
| 3196 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3197 | |
| 3198 | commit 9c757b789a59a855db57b448dd825329c4e9c4a0 |
| 3199 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3200 | Date: Tue Jul 3 00:33:03 2007 -0600 |
| 3201 | |
| 3202 | Consolidate mpc8220 linker scripts |
| 3203 | |
| 3204 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3205 | |
| 3206 | commit d181c9a15cd41863fe24840d17848429f27d3c8c |
| 3207 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3208 | Date: Tue Jul 3 00:32:58 2007 -0600 |
| 3209 | |
| 3210 | Consolidate mpc5xxx linker scripts |
| 3211 | |
| 3212 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3213 | |
| 3214 | commit 287ac924adb7291bebe5086652a362a30ab28b13 |
| 3215 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 3216 | Date: Tue Jul 3 00:32:53 2007 -0600 |
| 3217 | |
| 3218 | Consolidate mpc5xx linker scripts |
| 3219 | |
| 3220 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 3221 | |
| 3222 | commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd |
| 3223 | Author: Wolfgang Denk <wd@denx.de> |
| 3224 | Date: Wed Jul 4 00:43:53 2007 +0200 |
| 3225 | |
| 3226 | Fix a few file permission problems. |
| 3227 | |
| 3228 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 3229 | |
| 3230 | commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c |
| 3231 | Author: Wolfgang Denk <wd@denx.de> |
| 3232 | Date: Wed Jul 4 00:38:38 2007 +0200 |
| 3233 | |
| 3234 | Minor coding style cleanup. Rebuild CHANGELOG file. |
| 3235 | |
Wolfgang Denk | 78e0cf2 | 2007-07-04 00:38:38 +0200 | [diff] [blame] | 3236 | commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 |
| 3237 | Author: Jon Loeliger <jdl@jdl.com> |
| 3238 | Date: Mon Jun 11 19:03:44 2007 -0500 |
| 3239 | |
| 3240 | configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. |
| 3241 | |
| 3242 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3243 | |
| 3244 | commit 602ad3b33d9ceef83dbab46be68646d645d637ee |
| 3245 | Author: Jon Loeliger <jdl@jdl.com> |
| 3246 | Date: Mon Jun 11 19:03:39 2007 -0500 |
| 3247 | |
| 3248 | README: Rewrite command line config to use CONFIG_CMD_* names. |
| 3249 | |
| 3250 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3251 | |
| 3252 | commit 72a074cec68e5bad60d63206c050974e08afd804 |
| 3253 | Author: Jon Loeliger <jdl@jdl.com> |
| 3254 | Date: Mon Jun 11 19:03:34 2007 -0500 |
| 3255 | |
| 3256 | include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3257 | |
| 3258 | This is a compatibility step that allows both the older form |
| 3259 | and the new form to co-exist for a while until the older can |
| 3260 | be removed entirely. |
| 3261 | |
| 3262 | All transformations are of the form: |
| 3263 | Before: |
| 3264 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3265 | After: |
| 3266 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3267 | |
| 3268 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3269 | |
| 3270 | commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b |
| 3271 | Author: Jon Loeliger <jdl@jdl.com> |
| 3272 | Date: Mon Jun 11 19:03:28 2007 -0500 |
| 3273 | |
| 3274 | tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3275 | |
| 3276 | This is a compatibility step that allows both the older form |
| 3277 | and the new form to co-exist for a while until the older can |
| 3278 | be removed entirely. |
| 3279 | |
| 3280 | All transformations are of the form: |
| 3281 | Before: |
| 3282 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3283 | After: |
| 3284 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3285 | |
| 3286 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3287 | |
| 3288 | commit 9107ebe0d352420895ab69b715697bdebc8caf50 |
| 3289 | Author: Jon Loeliger <jdl@jdl.com> |
| 3290 | Date: Mon Jun 11 19:03:23 2007 -0500 |
| 3291 | |
| 3292 | board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3293 | |
| 3294 | This is a compatibility step that allows both the older form |
| 3295 | and the new form to co-exist for a while until the older can |
| 3296 | be removed entirely. |
| 3297 | |
| 3298 | All transformations are of the form: |
| 3299 | Before: |
| 3300 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3301 | After: |
| 3302 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3303 | |
| 3304 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3305 | |
| 3306 | commit 5e378003d592ea828ec69d6defcd4de79096dd5c |
| 3307 | Author: Jon Loeliger <jdl@jdl.com> |
| 3308 | Date: Mon Jun 11 19:03:19 2007 -0500 |
| 3309 | |
| 3310 | board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3311 | |
| 3312 | This is a compatibility step that allows both the older form |
| 3313 | and the new form to co-exist for a while until the older can |
| 3314 | be removed entirely. |
| 3315 | |
| 3316 | All transformations are of the form: |
| 3317 | Before: |
| 3318 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3319 | After: |
| 3320 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3321 | |
| 3322 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3323 | |
| 3324 | commit 737184114ec9c9e0ab94d6713536126073bd2472 |
| 3325 | Author: Jon Loeliger <jdl@jdl.com> |
| 3326 | Date: Mon Jun 11 19:03:15 2007 -0500 |
| 3327 | |
| 3328 | cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3329 | |
| 3330 | This is a compatibility step that allows both the older form |
| 3331 | and the new form to co-exist for a while until the older can |
| 3332 | be removed entirely. |
| 3333 | |
| 3334 | All transformations are of the form: |
| 3335 | Before: |
| 3336 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3337 | After: |
| 3338 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3339 | |
| 3340 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3341 | |
| 3342 | commit f48070fe5fe440dfb5ee5268c920de70e48ea327 |
| 3343 | Author: Jon Loeliger <jdl@jdl.com> |
| 3344 | Date: Mon Jun 11 19:03:08 2007 -0500 |
| 3345 | |
| 3346 | cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3347 | |
| 3348 | This is a compatibility step that allows both the older form |
| 3349 | and the new form to co-exist for a while until the older can |
| 3350 | be removed entirely. |
| 3351 | |
| 3352 | All transformations are of the form: |
| 3353 | Before: |
| 3354 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3355 | After: |
| 3356 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3357 | |
| 3358 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3359 | |
| 3360 | commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 |
| 3361 | Author: Jon Loeliger <jdl@jdl.com> |
| 3362 | Date: Mon Jun 11 19:03:03 2007 -0500 |
| 3363 | |
| 3364 | lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3365 | |
| 3366 | This is a compatibility step that allows both the older form |
| 3367 | and the new form to co-exist for a while until the older can |
| 3368 | be removed entirely. |
| 3369 | |
| 3370 | All transformations are of the form: |
| 3371 | Before: |
| 3372 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3373 | After: |
| 3374 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3375 | |
| 3376 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3377 | |
| 3378 | commit 73f032021ec5f13cda8faa4e34b6de80960eb86f |
| 3379 | Author: Jon Loeliger <jdl@jdl.com> |
| 3380 | Date: Mon Jun 11 19:02:58 2007 -0500 |
| 3381 | |
| 3382 | lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3383 | |
| 3384 | This is a compatibility step that allows both the older form |
| 3385 | and the new form to co-exist for a while until the older can |
| 3386 | be removed entirely. |
| 3387 | |
| 3388 | All transformations are of the form: |
| 3389 | Before: |
| 3390 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3391 | After: |
| 3392 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3393 | |
| 3394 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3395 | |
| 3396 | commit 98b79003c21c2578206003256de4e781d6b36ca8 |
| 3397 | Author: Jon Loeliger <jdl@jdl.com> |
| 3398 | Date: Mon Jun 11 19:02:53 2007 -0500 |
| 3399 | |
| 3400 | rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3401 | |
| 3402 | This is a compatibility step that allows both the older form |
| 3403 | and the new form to co-exist for a while until the older can |
| 3404 | be removed entirely. |
| 3405 | |
| 3406 | All transformations are of the form: |
| 3407 | Before: |
| 3408 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3409 | After: |
| 3410 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3411 | |
| 3412 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3413 | |
| 3414 | commit 6e2115acb6a892d53a6881bf253ae41d3df39156 |
| 3415 | Author: Jon Loeliger <jdl@jdl.com> |
| 3416 | Date: Mon Jun 11 19:02:49 2007 -0500 |
| 3417 | |
| 3418 | net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3419 | |
| 3420 | This is a compatibility step that allows both the older form |
| 3421 | and the new form to co-exist for a while until the older can |
| 3422 | be removed entirely. |
| 3423 | |
| 3424 | All transformations are of the form: |
| 3425 | Before: |
| 3426 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3427 | After: |
| 3428 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3429 | |
| 3430 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3431 | |
| 3432 | commit 45cdb9b72c94655c7308b464a2666057c0b286e0 |
| 3433 | Author: Jon Loeliger <jdl@jdl.com> |
| 3434 | Date: Mon Jun 11 19:02:34 2007 -0500 |
| 3435 | |
| 3436 | disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3437 | |
| 3438 | This is a compatibility step that allows both the older form |
| 3439 | and the new form to co-exist for a while until the older can |
| 3440 | be removed entirely. |
| 3441 | |
| 3442 | All transformations are of the form: |
| 3443 | Before: |
| 3444 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3445 | After: |
| 3446 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3447 | |
| 3448 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3449 | |
| 3450 | commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a |
| 3451 | Author: Jon Loeliger <jdl@jdl.com> |
| 3452 | Date: Mon Jun 11 19:02:20 2007 -0500 |
| 3453 | |
| 3454 | fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3455 | |
| 3456 | This is a compatibility step that allows both the older form |
| 3457 | and the new form to co-exist for a while until the older can |
| 3458 | be removed entirely. |
| 3459 | |
| 3460 | All transformations are of the form: |
| 3461 | Before: |
| 3462 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3463 | After: |
| 3464 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3465 | |
| 3466 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3467 | |
| 3468 | commit d5be43de93ff905c465e509d45a3164ef48d26e7 |
| 3469 | Author: Jon Loeliger <jdl@jdl.com> |
| 3470 | Date: Mon Jun 11 19:02:10 2007 -0500 |
| 3471 | |
| 3472 | drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3473 | |
| 3474 | This is a compatibility step that allows both the older form |
| 3475 | and the new form to co-exist for a while until the older can |
| 3476 | be removed entirely. |
| 3477 | |
| 3478 | All transformations are of the form: |
| 3479 | Before: |
| 3480 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3481 | After: |
| 3482 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3483 | |
| 3484 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3485 | |
| 3486 | commit b453960d4fdb87b3970d96119b90df2ed024fc4a |
| 3487 | Author: Jon Loeliger <jdl@jdl.com> |
| 3488 | Date: Mon Jun 11 19:02:05 2007 -0500 |
| 3489 | |
| 3490 | common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3491 | |
| 3492 | This is a compatibility step that allows both the older form |
| 3493 | and the new form to co-exist for a while until the older can |
| 3494 | be removed entirely. |
| 3495 | |
| 3496 | All transformations are of the form: |
| 3497 | Before: |
| 3498 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3499 | After: |
| 3500 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3501 | |
| 3502 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3503 | |
| 3504 | commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 |
| 3505 | Author: Jon Loeliger <jdl@jdl.com> |
| 3506 | Date: Mon Jun 11 19:01:54 2007 -0500 |
| 3507 | |
| 3508 | common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3509 | |
| 3510 | This is a compatibility step that allows both the older form |
| 3511 | and the new form to co-exist for a while until the older can |
| 3512 | be removed entirely. |
| 3513 | |
| 3514 | All transformations are of the form: |
| 3515 | Before: |
| 3516 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3517 | After: |
| 3518 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3519 | |
| 3520 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3521 | |
| 3522 | commit a76adc8142c1d956385a109e0b70f9319ede4d66 |
| 3523 | Author: Jon Loeliger <jdl@jdl.com> |
| 3524 | Date: Mon Jun 11 19:01:43 2007 -0500 |
| 3525 | |
| 3526 | common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| 3527 | |
| 3528 | This is a compatibility step that allows both the older form |
| 3529 | and the new form to co-exist for a while until the older can |
| 3530 | be removed entirely. |
| 3531 | |
| 3532 | All transformations are of the form: |
| 3533 | Before: |
| 3534 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| 3535 | After: |
| 3536 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| 3537 | |
| 3538 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3539 | |
| 3540 | commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 |
| 3541 | Author: Jon Loeliger <jdl@jdl.com> |
| 3542 | Date: Mon Jun 11 19:01:34 2007 -0500 |
| 3543 | |
| 3544 | Introduce initial versions of new Command Config files. |
| 3545 | |
| 3546 | Derive three new files from cmd_confdefs.h: |
| 3547 | config_bootp.h - Has BOOTP related config options, not commands |
| 3548 | config_cmd_all.h - Has a CONFIG_CMD_* definition for every command |
| 3549 | config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. |
| 3550 | |
| 3551 | For now, include "config_bootp.h" for compatability until all |
| 3552 | users of it directly include it properly. |
| 3553 | |
| 3554 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3555 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 3556 | commit 1f2a05898658900dc5717761e27abf2052e67e13 |
| 3557 | Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> |
| 3558 | Date: Sat Jun 30 18:50:48 2007 +0200 |
| 3559 | |
| 3560 | Fix S-ATA support. |
| 3561 | |
| 3562 | Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> |
| 3563 | |
| 3564 | commit a5d71e290f3673269be8eefb4ec44f53412f9461 |
| 3565 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 3566 | Date: Mon Jun 25 19:11:37 2007 +0200 |
| 3567 | |
| 3568 | [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG |
| 3569 | |
| 3570 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 3571 | |
| 3572 | commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b |
| 3573 | Author: Niklaus Giger <niklaus.giger@nestal.com> |
| 3574 | Date: Mon Jun 25 17:03:13 2007 +0200 |
| 3575 | |
| 3576 | ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt |
| 3577 | |
| 3578 | This patch prints the DDR status registers upon machine check |
| 3579 | interrupt on the 440EPx/GRx. This can be useful especially when |
| 3580 | ECC support is enabled. |
| 3581 | |
| 3582 | I added some small changes to the original patch from Niklaus to |
| 3583 | make it compile clean. |
| 3584 | |
| 3585 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| 3586 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3587 | |
| 3588 | commit 807018fb7faceb429ce0cb47baa2073746b33a4e |
| 3589 | Author: Niklaus Giger <niklaus.giger@nestal.com> |
| 3590 | Date: Mon Jun 25 16:50:55 2007 +0200 |
| 3591 | |
| 3592 | ppc4xx: Fix O=buildir builds |
| 3593 | |
| 3594 | This patch fixes the problem to assemble cpu/ppc4xx/start.S |
| 3595 | experienced last week where building failed having specified |
| 3596 | O=../build.sequoia. |
| 3597 | |
| 3598 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| 3599 | |
| 3600 | commit 466fff1a7bb5fe764a06450626f6098219f446b8 |
| 3601 | Author: Stefan Roese <sr@denx.de> |
| 3602 | Date: Mon Jun 25 15:57:39 2007 +0200 |
| 3603 | |
| 3604 | ppc4xx: Add pci_pre_init() for 405 boards |
| 3605 | |
| 3606 | This patch removes the CFG_PCI_PRE_INIT option completely, since |
| 3607 | it's not needed anymore with the patch from Matthias Fuchs with |
| 3608 | the "weak" pci_pre_init() implementation. |
| 3609 | |
| 3610 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3611 | |
| 3612 | commit 6f35c53166213c24a5a0e2390ed861136ff73870 |
| 3613 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 3614 | Date: Sun Jun 24 17:41:21 2007 +0200 |
| 3615 | |
| 3616 | ppc4xx: Maintenance patch for esd's CPCI405 derivats |
| 3617 | |
| 3618 | -add pci_pre_init() for pci interrupt fixup code |
| 3619 | -disable phy sleep mode via reset_phy() function |
| 3620 | -use correct io accessors |
| 3621 | -cleanup |
| 3622 | |
| 3623 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 3624 | |
| 3625 | commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 |
| 3626 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 3627 | Date: Sun Jun 24 17:23:41 2007 +0200 |
| 3628 | |
| 3629 | ppc4xx: Add pci_pre_init() for 405 boards |
| 3630 | |
| 3631 | This patch adds support for calling a plattform dependant |
| 3632 | pci_pre_init() function for 405 boards. This can be used to |
| 3633 | move the current pci_405gp_fixup_irq() function into the |
| 3634 | board code. |
| 3635 | |
| 3636 | This patch also makes the CFG_PCI_PRE_INIT define obsolete. |
| 3637 | A default function with 'weak' attribute is used when |
| 3638 | a board specific pci_pre_init() is not implemented. |
| 3639 | |
| 3640 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 3641 | |
| 3642 | commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb |
| 3643 | Author: Wolfgang Denk <wd@denx.de> |
| 3644 | Date: Fri Jun 22 23:59:00 2007 +0200 |
| 3645 | |
| 3646 | Coding stylke cleanup; rebuild CHANGELOG |
| 3647 | |
Wolfgang Denk | 1636d1c | 2007-06-22 23:59:00 +0200 | [diff] [blame] | 3648 | commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 |
| 3649 | Author: Igor Lisitsin <igor@emcraft.com> |
| 3650 | Date: Wed Apr 18 14:55:19 2007 +0400 |
| 3651 | |
| 3652 | Adapt log buffer code to support Linux 2.6 |
| 3653 | |
| 3654 | A new environment variable, "logversion", selects the log buffer |
| 3655 | behaviour. If it is not set or set to a value other than 2, then the |
| 3656 | old, Linux 2.4.4, behaviour is selected. |
| 3657 | |
| 3658 | Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| 3659 | -- |
| 3660 | |
| 3661 | commit a11e06965ec91270c51853407ff1261d3c740386 |
| 3662 | Author: Igor Lisitsin <igor@emcraft.com> |
| 3663 | Date: Wed Mar 28 19:06:19 2007 +0400 |
| 3664 | |
| 3665 | Extend POST support for PPC440 |
| 3666 | |
| 3667 | Added memory, CPU, UART, I2C and SPR POST tests for PPC440. |
| 3668 | |
| 3669 | Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| 3670 | -- |
| 3671 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 3672 | commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 |
| 3673 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 3674 | Date: Fri Jun 22 19:11:54 2007 +0200 |
| 3675 | |
| 3676 | [PCS440EP] upgrade the PCS440EP board: |
| 3677 | - Show on the Status LEDs, some States of the board. |
| 3678 | - Get the MAC addresses from the EEProm |
| 3679 | - use PREBOOT |
| 3680 | - use the CF on the board. |
| 3681 | - check the U-Boot image in the Flash with a SHA1 |
| 3682 | checksum. |
| 3683 | - use dynamic TLB entries generation for the SDRAM |
| 3684 | |
| 3685 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 3686 | |
| 3687 | commit 3a1f5c81b0b9557817a789bece839905581c2205 |
| 3688 | Author: Stefan Roese <sr@denx.de> |
| 3689 | Date: Fri Jun 22 16:58:40 2007 +0200 |
| 3690 | |
| 3691 | ppc4xx: Fix problem with extended program_tlb() funtion |
| 3692 | |
| 3693 | The recently extended program_tlb() function had a problem when |
| 3694 | multiple TLB's had to be setup (for example with 512MB of SDRAM). The |
| 3695 | virtual address was not incremented. This patch fixes this issue |
| 3696 | and is tested on Katmai with 512MB SDRAM. |
| 3697 | |
| 3698 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3699 | |
Wolfgang Denk | 1636d1c | 2007-06-22 23:59:00 +0200 | [diff] [blame] | 3700 | commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f |
| 3701 | Author: Rafal Jaworowski <raj@semihalf.com> |
| 3702 | Date: Fri Jun 22 14:58:04 2007 +0200 |
| 3703 | |
| 3704 | [ppc] Fix build breakage for all non-4xx PowerPC variants. |
| 3705 | |
| 3706 | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros |
| 3707 | - minor 4xx cleanup |
| 3708 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 3709 | commit d677b32855f577ae2690dcd64a172cdd706e0ffc |
| 3710 | Author: Mike Frysinger <vapier@gentoo.org> |
| 3711 | Date: Fri Jun 22 10:34:12 2007 +0200 |
| 3712 | |
| 3713 | [patch] add nand_init() prototype to nand.h |
| 3714 | |
| 3715 | since nand_init() is expected to be called by other parts of u-boot, there |
| 3716 | should be a prototype for it in nand.h |
| 3717 | |
| 3718 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| 3719 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3720 | |
Wolfgang Denk | 1636d1c | 2007-06-22 23:59:00 +0200 | [diff] [blame] | 3721 | commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b |
| 3722 | Author: Wolfgang Denk <wd@denx.de> |
| 3723 | Date: Wed Jun 20 18:14:24 2007 +0200 |
| 3724 | |
| 3725 | Coding style cleanup. Refresh CHANGELOG. |
| 3726 | |
Wolfgang Denk | 83b4cfa | 2007-06-20 18:14:24 +0200 | [diff] [blame] | 3727 | commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 |
| 3728 | Author: Stefan Roese <sr@denx.de> |
| 3729 | Date: Tue Jun 19 17:22:44 2007 +0200 |
| 3730 | |
| 3731 | ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board |
| 3732 | |
| 3733 | This patch adds a board command to configure the I2C bootstrap EEPROM |
| 3734 | values. Right now 533 and 667MHz are supported for booting either via NOR |
| 3735 | or NAND FLASH. Here the usage: |
| 3736 | |
| 3737 | => bootstrap 533 nor ;to configure the board for 533MHz NOR booting |
| 3738 | => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting |
| 3739 | |
| 3740 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3741 | |
| 3742 | commit df8a24cdd30151505cf57bbee5289e91bf53bd1b |
| 3743 | Author: Stefan Roese <sr@denx.de> |
| 3744 | Date: Tue Jun 19 16:42:31 2007 +0200 |
| 3745 | |
| 3746 | [ppc4xx] Fix problem with NAND booting on AMCC Acadia |
| 3747 | |
| 3748 | The latest changes showed a problem with the location of the NAND-SPL |
| 3749 | image in the OCM and the init-data area (incl. cache). This patch |
| 3750 | fixes this problem. |
| 3751 | |
| 3752 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3753 | |
| 3754 | commit 86ba99e34194394052d24c04dc40d1263d29a26f |
| 3755 | Author: Stefan Roese <sr@denx.de> |
| 3756 | Date: Tue Jun 19 16:40:58 2007 +0200 |
| 3757 | |
| 3758 | [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c |
| 3759 | |
| 3760 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3761 | |
| 3762 | commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 |
| 3763 | Author: Stefan Roese <sr@denx.de> |
| 3764 | Date: Fri Jun 15 11:33:41 2007 +0200 |
| 3765 | |
| 3766 | [ppc4xx] Change lwmon5 port to work with recent 440 exception rework |
| 3767 | |
| 3768 | Now CONFIG_440 has to be defined in all PPC440 board config files. |
| 3769 | |
| 3770 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3771 | |
| 3772 | commit efa35cf12d914d4caba942acd5a6c45f217de302 |
| 3773 | Author: Grzegorz Bernacki <gjb@semihalf.com> |
| 3774 | Date: Fri Jun 15 11:19:28 2007 +0200 |
| 3775 | |
| 3776 | ppc4xx: Clean up 440 exceptions handling |
| 3777 | |
| 3778 | - Introduced dedicated switches for building 440 and 405 images required |
| 3779 | for 440-specific machine instructions like 'rfmci' etc. |
| 3780 | |
| 3781 | - Exception vectors moved to the proper location (_start moved away from |
| 3782 | the critical exception handler space, which it occupied) |
| 3783 | |
| 3784 | - CriticalInput now serviced (with default handler) |
| 3785 | |
| 3786 | - MachineCheck properly serviced (added a dedicated handler and return |
| 3787 | subroutine) |
| 3788 | |
| 3789 | - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, |
| 3790 | unhandled and those not relevant for 4xx were eliminated) |
| 3791 | |
| 3792 | - Eliminated Linux leftovers, removed dead code |
| 3793 | |
| 3794 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 3795 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| 3796 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3797 | |
| 3798 | commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 |
| 3799 | Author: Stefan Roese <sr@denx.de> |
| 3800 | Date: Fri Jun 15 08:18:01 2007 +0200 |
| 3801 | |
| 3802 | [ppc4xx] Add initial lwmon5 board support |
| 3803 | |
| 3804 | This patch adds initial support for the Liebherr lwmon5 board euqipped |
| 3805 | with an AMCC 440EPx PowerPC. |
| 3806 | |
| 3807 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3808 | |
| 3809 | commit 85f737376d5ff3d5f0d45a8b657686326d175307 |
| 3810 | Author: Stefan Roese <sr@denx.de> |
| 3811 | Date: Fri Jun 15 07:39:43 2007 +0200 |
| 3812 | |
| 3813 | [ppc4xx] Extend 44x GPIO setup with default output state |
| 3814 | |
| 3815 | The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup |
| 3816 | is extended with the default GPIO output state (level). |
| 3817 | |
| 3818 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3819 | |
| 3820 | commit dbca208518e5e7f01a6420588d1cd6e60db74c2b |
| 3821 | Author: Stefan Roese <sr@denx.de> |
| 3822 | Date: Thu Jun 14 11:14:32 2007 +0200 |
| 3823 | |
| 3824 | [ppc4xx] Extend program_tlb() with virtual & physical addresses |
| 3825 | |
| 3826 | Now program_tlb() allows to program a TLB (or multiple) with |
| 3827 | different virtual and physical addresses. With this change, now one |
| 3828 | physical region (e.g. SDRAM) can be mapped 2 times, once with caches |
| 3829 | diabled and once with caches enabled. |
| 3830 | |
| 3831 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3832 | |
| 3833 | commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 |
| 3834 | Author: Detlev Zundel <dzu@denx.de> |
| 3835 | Date: Wed May 23 19:02:41 2007 +0200 |
| 3836 | |
| 3837 | Change 'repeatable' attribute of some commands to sensible values. |
| 3838 | |
| 3839 | Most prominently this changes 'erase' to be non-repeatable. |
| 3840 | |
| 3841 | Signed-off-by: Detlev Zundel <dzu@denx.de> |
| 3842 | |
| 3843 | commit 5afb202093f6a001797db92cf695b93a70ea9ab4 |
| 3844 | Author: Detlev Zundel <dzu@denx.de> |
| 3845 | Date: Wed May 23 18:47:48 2007 +0200 |
| 3846 | |
| 3847 | Fix 'run' not to continue after interrupted command |
| 3848 | |
| 3849 | Signed-off-by: Detlev Zundel <dzu@denx.de> |
| 3850 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 3851 | commit 9b7464a2c88614e1061f509c48930a3d240d1a35 |
| 3852 | Author: Jason Jin <Jason.jin@freescale.com> |
| 3853 | Date: Mon Jun 11 15:14:24 2007 +0200 |
| 3854 | |
| 3855 | USB: This patch fix readl in ohci swap reg access. |
| 3856 | |
| 3857 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 3858 | |
Wolfgang Denk | 83b4cfa | 2007-06-20 18:14:24 +0200 | [diff] [blame] | 3859 | commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 |
| 3860 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 3861 | Date: Fri Jun 8 14:52:22 2007 +0200 |
| 3862 | |
| 3863 | TQM5200: Add Flat Device Tree support, update default env. accordingly. |
| 3864 | |
| 3865 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| 3866 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 3867 | |
| 3868 | commit 9045f33c023f698660a2e45d1b2194c0711abebc |
| 3869 | Author: Wolfgang Denk <wd@denx.de> |
| 3870 | Date: Fri Jun 8 10:24:58 2007 +0200 |
| 3871 | |
| 3872 | Fix config problems on SC3 board; make ide_reset_timeout work. |
| 3873 | |
| 3874 | commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b |
| 3875 | Author: Benoît Monin <bmonin@adeneo.eu> |
| 3876 | Date: Fri Jun 8 09:55:24 2007 +0200 |
| 3877 | |
| 3878 | [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE |
| 3879 | |
| 3880 | Set the correct value in GPIOx_TCR when configuring the gpio |
| 3881 | with CFG_440_GPIO_TABLE. |
| 3882 | |
| 3883 | Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| 3884 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3885 | |
Wolfgang Denk | 85eb5ca | 2007-08-14 09:47:27 +0200 | [diff] [blame] | 3886 | commit f539edc076cfe52bff919dd512ba8d7af0e22092 |
| 3887 | Author: Vadim Bendebury <vbendeb@google.com> |
| 3888 | Date: Thu May 24 15:52:25 2007 -0700 |
| 3889 | |
| 3890 | cosmetic changes to bcm570x driver |
| 3891 | |
| 3892 | This is a cosmetic only changes submission. |
| 3893 | It affects files relevant to bcm570x driver. |
| 3894 | the commands used to generate this change was |
| 3895 | |
| 3896 | cd drivers |
| 3897 | Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h |
| 3898 | |
| 3899 | The BMW target (the only one using this chip so far) builds cleanly, the |
| 3900 | `before and after' generated object files for drivers/bcm570x.c and |
| 3901 | drivers/tigon3.o are identical as reported by objdump -d |
| 3902 | |
| 3903 | Signed-off-by: Vadim Bendebury <vbendeb@google.com> |
| 3904 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 3905 | |
Wolfgang Denk | 83b4cfa | 2007-06-20 18:14:24 +0200 | [diff] [blame] | 3906 | commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 |
| 3907 | Author: Wolfgang Denk <wd@denx.de> |
| 3908 | Date: Wed Jun 6 16:26:56 2007 +0200 |
| 3909 | |
| 3910 | Coding Style cleanup; generate new CHANGELOG file. |
| 3911 | |
| 3912 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 3913 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 3914 | commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 |
| 3915 | Author: Markus Klotzbuecher <mk@denx.de> |
| 3916 | Date: Wed Jun 6 11:49:44 2007 +0200 |
| 3917 | |
| 3918 | TRAB, USB: update trab board configuration for use of generic ohci driver |
| 3919 | |
| 3920 | commit dace45acd1c1357daa9322099d07c9a9e08b0024 |
| 3921 | Author: Markus Klotzbuecher <mk@denx.de> |
| 3922 | Date: Wed Jun 6 11:49:43 2007 +0200 |
| 3923 | |
| 3924 | USB: ohci fixes and cleanup for ppc4xx and yosemite board. |
| 3925 | |
| 3926 | commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df |
| 3927 | Author: Markus Klotzbuecher <mk@denx.de> |
| 3928 | Date: Wed Jun 6 11:49:43 2007 +0200 |
| 3929 | |
| 3930 | USB: ohci fixes and cleanup for mpc5xxx and IceCube board config |
| 3931 | |
| 3932 | commit fc43be478f2aa37ce38acd85355038866e4162af |
| 3933 | Author: Markus Klotzbuecher <mk@denx.de> |
| 3934 | Date: Wed Jun 6 11:49:35 2007 +0200 |
| 3935 | |
| 3936 | USB/OHCI: endianness cleanup in the generic ohci driver |
| 3937 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 3938 | commit c440bfe6d6d92d66478a7e84402b31f48413617b |
| 3939 | Author: Stefan Roese <sr@denx.de> |
| 3940 | Date: Wed Jun 6 11:42:13 2007 +0200 |
| 3941 | |
| 3942 | ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board |
| 3943 | |
| 3944 | This patch adds NAND booting support for the AMCC Acadia eval board. |
| 3945 | |
| 3946 | Please make sure to configure jumper J7 to position 2-3 when booting |
| 3947 | from NOR, and to position 1-2 when booting for NAND. |
| 3948 | |
| 3949 | I also added a board command to configure the I2C bootstrap EEPROM |
| 3950 | values. Right now only 267MHz is support for booting either via NOR |
| 3951 | or NAND FLASH. Here the usage: |
| 3952 | |
| 3953 | => bootstrap 267 nor ;to configure the board for 267MHz NOR booting |
| 3954 | => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting |
| 3955 | |
| 3956 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 3957 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 3958 | commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 |
| 3959 | Author: Rodolfo Giometti <giometti@linux.it> |
| 3960 | Date: Wed Jun 6 10:08:14 2007 +0200 |
| 3961 | |
| 3962 | Files include/linux/byteorder/{big,little}_endian.h define |
| 3963 | __BIG_ENDIAN and __LITTLE_ENDIAN. |
| 3964 | |
| 3965 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| 3966 | |
| 3967 | commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 |
| 3968 | Author: Zhang Wei <wei.zhang@freescale.com> |
| 3969 | Date: Wed Jun 6 10:08:14 2007 +0200 |
| 3970 | |
| 3971 | Add USB PCI-OHCI, USB keyboard and event poll support to the |
| 3972 | MPC8641HPCN board config file. |
| 3973 | |
| 3974 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 3975 | |
| 3976 | commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 |
| 3977 | Author: Zhang Wei <wei.zhang@freescale.com> |
| 3978 | Date: Wed Jun 6 10:08:14 2007 +0200 |
| 3979 | |
| 3980 | USB PCI-OHCI, interrupt pipe and usb event poll support |
| 3981 | |
| 3982 | This patch added USB PCI-OHCI chips support, interrupt pipe support |
| 3983 | and usb event poll support. For supporting the USB interrupt pipe, the |
| 3984 | globe urb_priv is moved to purb in ed struct. Now, we can process |
| 3985 | several urbs at one time. The interrupt pipe support codes are ported |
| 3986 | from Linux kernel 2.4. |
| 3987 | |
| 3988 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 3989 | |
| 3990 | commit fdcfaa1b02268b2899e374b35adf936c911a47eb |
| 3991 | Author: Zhang Wei <wei.zhang@freescale.com> |
| 3992 | Date: Wed Jun 6 10:08:13 2007 +0200 |
| 3993 | |
| 3994 | USB event poll support |
| 3995 | |
| 3996 | This patch adds USB event poll support, which could be used in usbkbd |
| 3997 | and other usb devices driver when the asynchronous interrupt |
| 3998 | processing is supported. |
| 3999 | |
| 4000 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com |
| 4001 | |
| 4002 | commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e |
| 4003 | Author: Rodolfo Giometti <giometti@linux.it> |
| 4004 | Date: Wed Jun 6 10:08:12 2007 +0200 |
| 4005 | |
| 4006 | ISP116x: delay for crappy USB keys |
| 4007 | |
| 4008 | Using some (very) slow USB keys cause the USB host controller buffers |
| 4009 | are not ready to be read by the CPU so we need an extra delay before |
| 4010 | reading the USB storage data. |
| 4011 | |
| 4012 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| 4013 | |
| 4014 | commit 09444143670c9c2243cb7aba9f70b3713d33bed1 |
| 4015 | Author: Markus Klotzbuecher <mk@denx.de> |
| 4016 | Date: Wed Jun 6 10:08:12 2007 +0200 |
| 4017 | |
| 4018 | Change duplicate usb_cpu_init_fail to usb_board_init_fail |
| 4019 | |
| 4020 | Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing |
| 4021 | this out. |
| 4022 | |
| 4023 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| 4024 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4025 | commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e |
| 4026 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 4027 | Date: Tue Jun 5 12:30:52 2007 -0500 |
| 4028 | |
| 4029 | mpc8641 image size cleanup |
| 4030 | |
| 4031 | e600 does not have a bootpg restriction. |
| 4032 | Move the version string to beginning of image at fff00000. |
| 4033 | Resetvec.S is not needed. |
| 4034 | Update flash copy instructions. |
| 4035 | Add tftpflash env variable |
| 4036 | |
| 4037 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 4038 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4039 | |
| 4040 | commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 |
| 4041 | Author: Benoît Monin <bmonin@adeneo.eu> |
| 4042 | Date: Mon Jun 4 08:36:05 2007 +0200 |
| 4043 | |
| 4044 | [PATCH] Fix ppc4xx bootstrap letter displayed on startup |
| 4045 | |
| 4046 | The attached patch is mainly cosmetic, allowing u-boot to |
| 4047 | display the correct bootstrap option letter according to the |
| 4048 | datasheets. |
| 4049 | |
| 4050 | The original patch was extended with 405EZ support by Stefan |
| 4051 | Roese. |
| 4052 | |
| 4053 | Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| 4054 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4055 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 4056 | commit 5b1313fb2758ffce8b624457f777d8cc6709608d |
| 4057 | Author: Nikita V. Youshchenko <yoush@debian.org> |
| 4058 | Date: Wed May 23 12:45:19 2007 +0400 |
| 4059 | |
| 4060 | fix compilation problem for mpc8349itx CFG_RAMBOOT |
| 4061 | |
| 4062 | Current include/configs/MPC8349ITX.h does contain some support for building |
| 4063 | image that will be started from memory (without putting in into flash). |
| 4064 | It could be triggered by building with TEXT_BASE set to a low value. |
| 4065 | |
| 4066 | However, this support is incomplete: using of low TEXT_BASE causes |
| 4067 | defining configuration macros in inconsistent way, which later leads |
| 4068 | to compilation errors. In particular. flash support is being disabled, |
| 4069 | but then flash structures get referenced. |
| 4070 | |
| 4071 | This patch fixes this, making it possible to build with low TEXT_BASE. |
| 4072 | |
| 4073 | Signed-Off-By: Nikita Youshchenko <yoush@debian.org> |
| 4074 | |
| 4075 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 4076 | |
| 4077 | commit 8a364f0970de49949d635e60accf463c6443ef8c |
| 4078 | Author: Nikita V. Youshchenko <yoush@debian.org> |
| 4079 | Date: Wed May 23 12:45:25 2007 +0400 |
| 4080 | |
| 4081 | add missing 'console' var to default mpc8349itx config |
| 4082 | |
| 4083 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 4084 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4085 | commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 |
| 4086 | Author: Stefan Roese <sr@denx.de> |
| 4087 | Date: Fri Jun 1 16:18:17 2007 +0200 |
| 4088 | |
| 4089 | ppc4xx: Add missing file for Bamboo NAND booting support |
| 4090 | |
| 4091 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4092 | |
| 4093 | commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b |
| 4094 | Author: Stefan Roese <sr@denx.de> |
| 4095 | Date: Fri Jun 1 15:58:19 2007 +0200 |
| 4096 | |
| 4097 | ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz |
| 4098 | |
| 4099 | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As |
| 4100 | suggested by AMCC it is not recommended to dynamically change the EBC |
| 4101 | speed after bootup. So we undo this change to be on the safe side. |
| 4102 | |
| 4103 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4104 | |
| 4105 | commit 9d9096043e8f713d4bf1743d32e1459e6a11644b |
| 4106 | Author: Stefan Roese <sr@denx.de> |
| 4107 | Date: Fri Jun 1 15:29:04 2007 +0200 |
| 4108 | |
| 4109 | ppc4xx: Update Sequoia NAND booting support with ECC |
| 4110 | |
| 4111 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4112 | |
| 4113 | commit cf959c7d6687567c308e366e9581e1a5aff5cc5b |
| 4114 | Author: Stefan Roese <sr@denx.de> |
| 4115 | Date: Fri Jun 1 15:27:11 2007 +0200 |
| 4116 | |
| 4117 | ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board |
| 4118 | |
| 4119 | This patch adds NAND booting support for the AMCC Bamboo eval board. |
| 4120 | Since the NAND-SPL boot image is limited to 4kbytes, this version |
| 4121 | only supports the onboard 64MBytes of DDR. The DIMM modules can't be |
| 4122 | supported, since the setup code for I2C DIMM autodetection and |
| 4123 | configuration is too big for this NAND bootloader. |
| 4124 | |
| 4125 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4126 | |
| 4127 | commit 42be56f53c8b107868e6125c8524ae84293e95a7 |
| 4128 | Author: Stefan Roese <sr@denx.de> |
| 4129 | Date: Fri Jun 1 15:23:04 2007 +0200 |
| 4130 | |
| 4131 | NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c |
| 4132 | |
| 4133 | The U-Boot NAND booting support is now extended to support ECC |
| 4134 | upon loading of the NAND U-Boot image. |
| 4135 | |
| 4136 | Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). |
| 4137 | |
| 4138 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4139 | |
| 4140 | commit a471db07fbb65a841ffc9f4f112562b945230f98 |
| 4141 | Author: Stefan Roese <sr@denx.de> |
| 4142 | Date: Fri Jun 1 15:19:29 2007 +0200 |
| 4143 | |
| 4144 | ppc4xx: Prepare Bamboo port for NAND booting support |
| 4145 | |
| 4146 | This patch updates the "normal" Bamboo NOR booting port, so |
| 4147 | that it is compatible with the coming soon NAND booting |
| 4148 | Bamboo port. |
| 4149 | |
| 4150 | It also enables the 2nd NAND flash on the Bamboo. |
| 4151 | |
| 4152 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4153 | |
| 4154 | commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 |
| 4155 | Author: Stefan Roese <sr@denx.de> |
| 4156 | Date: Fri Jun 1 15:16:58 2007 +0200 |
| 4157 | |
| 4158 | ppc4xx: Update in_be32() functions and friends to latest Linux version |
| 4159 | |
| 4160 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4161 | |
| 4162 | commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c |
| 4163 | Author: Stefan Roese <sr@denx.de> |
| 4164 | Date: Fri Jun 1 15:15:12 2007 +0200 |
| 4165 | |
| 4166 | NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c |
| 4167 | |
| 4168 | This patch adds hardware ECC support to the NDFC driver. It also |
| 4169 | changes the register access from using the "simple" in32/out32 |
| 4170 | functions to the in_be32/out_be32 functions, which make sure |
| 4171 | that the access is correctly synced. This is the only recommended |
| 4172 | access to SoC registers in the current Linux kernel. |
| 4173 | |
| 4174 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4175 | |
| 4176 | commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 |
| 4177 | Author: Stefan Roese <sr@denx.de> |
| 4178 | Date: Fri Jun 1 15:12:15 2007 +0200 |
| 4179 | |
| 4180 | NAND: Update nand_ecc.c to latest Linux version |
| 4181 | |
| 4182 | This patch updates the nand_ecc code to the latest Linux version. |
| 4183 | The main reason for this is the more compact code. This makes |
| 4184 | it possible to include the ECC code into the NAND bootloader |
| 4185 | image (NAND_SPL) for PPC4xx. |
| 4186 | |
| 4187 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4188 | |
| 4189 | commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 |
| 4190 | Author: Stefan Roese <sr@denx.de> |
| 4191 | Date: Fri Jun 1 15:09:50 2007 +0200 |
| 4192 | |
| 4193 | ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo |
| 4194 | |
| 4195 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4196 | |
| 4197 | commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc |
| 4198 | Author: Stefan Roese <sr@denx.de> |
| 4199 | Date: Fri Jun 1 13:45:24 2007 +0200 |
| 4200 | |
| 4201 | ppc4xx: Change Luan config file to support ECC |
| 4202 | |
| 4203 | With the updated 44x DDR2 driver the Luan board now supports |
| 4204 | ECC generation and checking. |
| 4205 | |
| 4206 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4207 | |
| 4208 | commit 7187db73491c8de0fb56efb5e5134ba5ec443089 |
| 4209 | Author: Stefan Roese <sr@denx.de> |
| 4210 | Date: Fri Jun 1 13:45:00 2007 +0200 |
| 4211 | |
| 4212 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| 4213 | |
| 4214 | Add config option for 180 degree advance clock control as needed |
| 4215 | for the AMCC Luan eval board. |
| 4216 | |
| 4217 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4218 | |
| 4219 | commit ee1529838abbfaa35f14e3ffbeaaba693159475f |
| 4220 | Author: Wolfgang Denk <wd@denx.de> |
| 4221 | Date: Thu May 31 17:20:09 2007 +0200 |
| 4222 | |
| 4223 | Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. |
| 4224 | |
| 4225 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4226 | |
| 4227 | commit 7049288fb1f16f1b317140226cdebd07bd416395 |
| 4228 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4229 | Date: Sun May 27 17:26:46 2007 +0200 |
| 4230 | |
| 4231 | Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. |
| 4232 | |
| 4233 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4234 | |
| 4235 | commit 4520fd4d2c450da49637216aa0e53739b61c60ac |
| 4236 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4237 | Date: Sun May 27 17:06:36 2007 +0200 |
| 4238 | |
| 4239 | Motion-PRO: Add support for redundant environment. |
| 4240 | |
| 4241 | Enable redundant environment, add a MTD partition for it; also add env. |
| 4242 | variable command for passing MTD partitions to the kernel command line. |
| 4243 | |
| 4244 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 4245 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4246 | |
| 4247 | commit a26eabeec31746f06d309103690892805696e344 |
| 4248 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4249 | Date: Sun May 27 17:05:11 2007 +0200 |
| 4250 | |
| 4251 | Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. |
| 4252 | |
| 4253 | Allow passing longer command line to the kernel - useful especially |
| 4254 | for passing MTD partition layout. |
| 4255 | |
| 4256 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 4257 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4258 | |
| 4259 | commit 9160b96f71483a116de81c68985e8ee306d36764 |
| 4260 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4261 | Date: Sun May 27 17:04:18 2007 +0200 |
| 4262 | |
| 4263 | Fix: Add missing NULL termination in strings expanded by macros parser. |
| 4264 | |
| 4265 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 4266 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4267 | |
| 4268 | commit 630ec84aef7228fc1dbfb38dec78541403a786cd |
| 4269 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4270 | Date: Sun May 27 17:03:37 2007 +0200 |
| 4271 | |
| 4272 | Motion-PRO: Update EEPROM's page write bits and write delay. |
| 4273 | |
| 4274 | Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A |
| 4275 | have a page write capability of two bytes", and "This device offers fast (1ms) |
| 4276 | byte write". Add 3ms of extra delay. |
| 4277 | |
| 4278 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 4279 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4280 | |
| 4281 | commit c00125e07c1ebc125bab40e1e18bceed8be0c162 |
| 4282 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4283 | Date: Sun May 27 16:58:45 2007 +0200 |
| 4284 | |
| 4285 | MPC5XXX, Motion-PRO: Fix PHY initialization problem. |
| 4286 | |
| 4287 | After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which |
| 4288 | networking does not function. This commit switches PHY to TX mode by clearing |
| 4289 | the FX_SEL bit of Mode Control Register. It also reverses commit |
| 4290 | 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. |
| 4291 | |
| 4292 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 4293 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4294 | |
| 4295 | commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db |
| 4296 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4297 | Date: Sun May 27 16:57:15 2007 +0200 |
| 4298 | |
| 4299 | Motion-PRO: Add support for the temperature sensor. |
| 4300 | |
| 4301 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| 4302 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4303 | |
| 4304 | commit c75e639630cc132dc19cd1ecda5922c0db0bfbba |
| 4305 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4306 | Date: Sun May 27 16:55:23 2007 +0200 |
| 4307 | |
| 4308 | Motion-PRO: Add displaying of CPLD revision information during boot. |
| 4309 | |
| 4310 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| 4311 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4312 | |
| 4313 | commit c99512d6bd3973f01ca2fc4896d829b46e68f150 |
| 4314 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4315 | Date: Sun May 27 16:53:43 2007 +0200 |
| 4316 | |
| 4317 | MPC5xxx: Change names of defines related to IPB and PCI clocks. |
| 4318 | |
| 4319 | Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining |
| 4320 | them does not cause PCI or IPB clocks to run at the specified speed. |
| 4321 | Instead, they configure divisors used to calculate said clocks. This |
| 4322 | patch renames the defines according to their real function. |
| 4323 | |
| 4324 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| 4325 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4326 | |
| 4327 | commit a11c0b85dc3664bb3c1e781137118730c8f619ab |
| 4328 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4329 | Date: Sun May 27 16:51:48 2007 +0200 |
| 4330 | |
| 4331 | Motion-PRO: Add LED support. |
| 4332 | |
| 4333 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| 4334 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| 4335 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4336 | |
Wolfgang Denk | a5a38f4 | 2007-08-16 11:51:04 +0200 | [diff] [blame] | 4337 | commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b |
| 4338 | Author: Ulf Samuelsson <ulf@atmel.com> |
| 4339 | Date: Thu May 24 12:12:47 2007 +0200 |
| 4340 | |
| 4341 | [PATCH][NAND] Define the Vendor Id for Micron NAND Flash |
| 4342 | |
| 4343 | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| 4344 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 4345 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4346 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4347 | commit d756894722c888d09a9fa1df8323753772d3dcce |
| 4348 | Author: Stefan Roese <sr@denx.de> |
| 4349 | Date: Thu May 24 09:49:00 2007 +0200 |
| 4350 | |
| 4351 | ppc4xx: Fix small 405EZ OCM initilization bug in start.S |
| 4352 | |
| 4353 | As pointed out by Bruce Adler <bruce.adler@acm.org> this patch |
| 4354 | fixes a small bug in the 405EZ OCM initialization. Thanks for |
| 4355 | spotting. |
| 4356 | |
| 4357 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4358 | |
| 4359 | commit 5d4a179013d59a76446462e1eb0a969fba63eb81 |
| 4360 | Author: Stefan Roese <sr@denx.de> |
| 4361 | Date: Thu May 24 08:22:09 2007 +0200 |
| 4362 | |
| 4363 | ppc4xx: Update AMCC Acadia support for board revision 1.1 |
| 4364 | |
| 4365 | This patch updates the Acadia (405EZ) support for the new 1.1 board |
| 4366 | revision. It also adds support for NAND FLASH via the 4xx NDFC. |
| 4367 | |
| 4368 | Please note that the jumper J7 must be in position 2-3 for this |
| 4369 | NAND support. Position 1-2 is for NAND booting only. NAND booting |
| 4370 | support will follow later. |
| 4371 | |
| 4372 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4373 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 4374 | commit 822d55365bb557e084d0e33625a6dedcc866110b |
| 4375 | Author: Jon Loeliger <jdl@freescale.com> |
| 4376 | Date: Wed May 23 14:09:46 2007 -0500 |
| 4377 | |
| 4378 | Add LIST_86xx MAKEALL target for PowerPC builds. |
| 4379 | |
| 4380 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4381 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4382 | commit 9f0077abd69f7a7c756a915b961037302be3e6f2 |
| 4383 | Author: Stefan Roese <sr@denx.de> |
| 4384 | Date: Tue May 22 12:48:09 2007 +0200 |
| 4385 | |
| 4386 | ppc4xx: Use do { ... } while (0) for CPR & SDR access macros |
| 4387 | |
| 4388 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4389 | |
| 4390 | commit 6f3dfc139a838b0841c151efe00ad47db2366e79 |
| 4391 | Author: Stefan Roese <sr@denx.de> |
| 4392 | Date: Tue May 22 12:46:10 2007 +0200 |
| 4393 | |
| 4394 | ppc4xx: Add 405 support to 4xx NAND driver ndfc.c |
| 4395 | |
| 4396 | This patch adds support for 405 PPC's to the 4xx NAND driver |
| 4397 | ndfc.c. This is in preparation for the new AMCC 405EZ. |
| 4398 | |
| 4399 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4400 | |
| 4401 | commit 10603d76767426be803dadd4fb688b97eb69481c |
| 4402 | Author: Stefan Roese <sr@denx.de> |
| 4403 | Date: Mon May 21 07:41:22 2007 +0200 |
| 4404 | |
| 4405 | ppc4xx: Fix problem in 405EZ OCM initialization |
| 4406 | |
| 4407 | As spotted by Bruce Adler this patch fixes an initialization problem |
| 4408 | for the 405EZ OCM. |
| 4409 | |
| 4410 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4411 | |
| 4412 | commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 |
| 4413 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4414 | Date: Fri May 18 16:47:03 2007 +0100 |
| 4415 | |
| 4416 | Reduce line lengths to 80 characters max. |
| 4417 | |
| 4418 | commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 |
| 4419 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4420 | Date: Fri May 18 14:34:07 2007 +0100 |
| 4421 | |
| 4422 | Makefile permissions |
| 4423 | |
| 4424 | commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d |
| 4425 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4426 | Date: Fri May 18 14:33:11 2007 +0100 |
| 4427 | |
| 4428 | Makefile permissions |
| 4429 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 4430 | commit 255a3577c848706441daee0174543efe205a77f8 |
| 4431 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 4432 | Date: Wed May 16 16:52:19 2007 -0500 |
| 4433 | |
| 4434 | Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx |
| 4435 | |
| 4436 | For all practical u-boot purposes, TSECs don't differ throughout the |
| 4437 | mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. |
| 4438 | |
| 4439 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 4440 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4441 | commit 70124c2602ae2d4c5d3dba05b482d91548242de8 |
| 4442 | Author: Stefano Babic <sbabic@denx.de> |
| 4443 | Date: Wed May 16 14:49:12 2007 +0200 |
| 4444 | |
| 4445 | Fix compile problem cause my Microblaze merge |
| 4446 | |
| 4447 | Signed-off-by: Stefano Babic <sbabic@denx.de> |
| 4448 | |
| 4449 | commit ada4697d0230d6da552867777f98a67ec3ba2579 |
| 4450 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4451 | Date: Wed May 16 13:23:10 2007 +0200 |
| 4452 | |
| 4453 | [PATCH] Run new sequoia boards with an EBC speed of 83MHz |
| 4454 | |
| 4455 | Because the Sequoia board does not boot with an EBC faster than 66MHz, |
| 4456 | the clock divider are changed after the initial boot process. |
| 4457 | |
| 4458 | This allows for maximum clocking speeds to be achieved on newer boards. |
| 4459 | Sequoia boards with 666.66 MHz processors require that the EBC divider |
| 4460 | be set to 3 in order to start the initial boot process at a slower EBC |
| 4461 | speed. After the initial boot process, the divider can be set back to 2, |
| 4462 | which will cause the boards to run at 83.333MHz. This is backward |
| 4463 | compatible with boards with 533.33 MHz processors, as these boards will |
| 4464 | already be set with an EBC divider of 2. |
| 4465 | |
| 4466 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4467 | |
| 4468 | commit a7676ea7732f3c596805079fed7e5c9fac652cfc |
| 4469 | Author: Wolfgang Denk <wd@denx.de> |
| 4470 | Date: Wed May 16 01:16:53 2007 +0200 |
| 4471 | |
| 4472 | Minor Coding Style cleanup, update CHANGELOG. |
| 4473 | |
| 4474 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4475 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 4476 | commit d62f64cc23a940eafe712c776b3249e4160753d1 |
| 4477 | Author: Wolfgang Denk <wd@denx.de> |
| 4478 | Date: Wed May 16 00:13:33 2007 +0200 |
| 4479 | |
| 4480 | Coding Style Cleanup, new CHANGELOG |
| 4481 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 4482 | commit 3162eb836903c8b247fdc7470dd39bfa6996f495 |
| 4483 | Author: Wolfgang Denk <wd@denx.de> |
| 4484 | Date: Tue May 15 23:38:05 2007 +0200 |
| 4485 | |
| 4486 | Minor coding style cleanup. |
| 4487 | |
| 4488 | commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e |
| 4489 | Author: mushtaq khan <mushtaq_k@procsys.com> |
| 4490 | Date: Fri Apr 20 14:23:02 2007 +0530 |
| 4491 | |
| 4492 | Add driver for S-ATA-controller on Intel processors with South |
| 4493 | Bridge, ICH-5, ICH-6 and ICH-7. |
| 4494 | |
| 4495 | Implementation: |
| 4496 | |
| 4497 | 1. Code is divided in to two files. All functions, which are |
| 4498 | controller specific are kept in "drivers/ata_piix.c" file and |
| 4499 | functions, which are not controller specific, are kept in |
| 4500 | "common/cmd_sata.c" file. |
| 4501 | |
| 4502 | 2. Reading and Writing from the S-ATA drive is done using PIO method. |
| 4503 | |
| 4504 | 3. Driver can be configured for 48-bit addressing by defining macro |
| 4505 | CONFIG_LBA48, if this macro is not defined driver uses the 28-bit |
| 4506 | addressing. |
| 4507 | |
| 4508 | 4. S-ATA read function is hooked to the File system, commands like |
| 4509 | ext2ls and ext2load file can be used. This has been tested. |
| 4510 | |
| 4511 | 5. U-Boot command "SATA_init" is added, which initializes the S-ATA |
| 4512 | controller and identifies the S-ATA drives connected to it. |
| 4513 | |
| 4514 | 6. U-Boot command "sata" is added, which is used to read/write, print |
| 4515 | partition table and get info about the drives present. This I have |
| 4516 | implemented in same way as "ide" command is implemented in U-Boot. |
| 4517 | |
| 4518 | 7. This driver is for S-ATA in native mode. |
| 4519 | |
| 4520 | 8. This driver does not support the Native command queuing and |
| 4521 | Hot-plugging. |
| 4522 | |
| 4523 | Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| 4524 | |
| 4525 | commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 |
| 4526 | Author: mushtaq khan <mushtaq_k@procsys.com> |
| 4527 | Date: Mon Apr 30 15:57:22 2007 +0530 |
| 4528 | |
| 4529 | Fixes bug clearing the bss section for i386 |
| 4530 | |
| 4531 | Hi, |
| 4532 | There is a bug in the code of clearing the bss section for processor |
| 4533 | i386.(File: cpu/i386/start.S) |
| 4534 | In the code, bss_start addr (starting addr of bss section) is put into |
| 4535 | the register %eax, but the code which clears the bss section refers to |
| 4536 | the addr pointed by %edi. |
| 4537 | |
| 4538 | This patch fixes this bug by putting bss_start into %edi register. |
| 4539 | |
| 4540 | Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| 4541 | |
| 4542 | commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 |
| 4543 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 4544 | Date: Mon Apr 30 16:47:28 2007 -0500 |
| 4545 | |
| 4546 | Add support for BCM5464 Quad Phy |
| 4547 | |
| 4548 | Added support for Broadcom's BCM5464 Quad Phy |
| 4549 | |
| 4550 | Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| 4551 | |
| 4552 | commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a |
| 4553 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 4554 | Date: Wed May 9 08:10:57 2007 +0800 |
| 4555 | |
| 4556 | Search the exception table with linear algorithm |
| 4557 | |
| 4558 | Search the exception table with linear algorithm instead of |
| 4559 | bisecting algorithm. |
| 4560 | Because the exception table might be unsorted. |
| 4561 | |
| 4562 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 4563 | |
| 4564 | commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 |
| 4565 | Author: Aubrey.Li <aubrey.adi@gmail.com> |
| 4566 | Date: Mon May 14 11:47:35 2007 +0800 |
| 4567 | |
| 4568 | Fix compilation issues on MACOSX |
| 4569 | |
| 4570 | Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> |
| 4571 | Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> |
| 4572 | |
| 4573 | commit 56fd7162985c412317bbf763a225fba23c64fd31 |
| 4574 | Author: Stephen Williams <steve@icarus.com> |
| 4575 | Date: Tue May 15 07:55:42 2007 -0700 |
| 4576 | |
| 4577 | Fix for compile of JSE target |
| 4578 | |
| 4579 | The attached patch fixes the compile of the JSE board in the |
| 4580 | denx git as of 14 may 2007. It is an extremely simple patch, |
| 4581 | it just adds the missing define of CFG_SYSTEMACE_WIDTH. |
| 4582 | |
| 4583 | Fix to compile JSE against 20070514 git of u-boot |
| 4584 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4585 | commit 61936667e86a250ae12fd2dc189d3588f0a59e0b |
| 4586 | Author: Stefan Roese <sr@denx.de> |
| 4587 | Date: Fri May 11 12:01:49 2007 +0200 |
| 4588 | |
| 4589 | ppc4xx: Add mtcpr/mfcpr access macros |
| 4590 | |
| 4591 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4592 | |
| 4593 | commit 343c48bd84606c4025c8a7c7263fda465d6e284c |
| 4594 | Author: Stefan Roese <sr@denx.de> |
| 4595 | Date: Fri May 11 12:01:06 2007 +0200 |
| 4596 | |
| 4597 | ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too |
| 4598 | |
| 4599 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4600 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 4601 | commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 |
| 4602 | Author: Piotr Kruszynski <ppk@semihalf.com> |
| 4603 | Date: Thu May 10 16:55:52 2007 +0200 |
| 4604 | |
| 4605 | [Motion-PRO] Add MTD and JFFS2 support, also add default partition |
| 4606 | definition. |
| 4607 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4608 | commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 |
| 4609 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4610 | Date: Wed May 9 11:42:44 2007 +0100 |
| 4611 | |
| 4612 | Add the board directory for SMN42 |
| 4613 | |
| 4614 | commit 160131bf965785419626df6c388729fe0b597992 |
| 4615 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4616 | Date: Wed May 9 11:41:58 2007 +0100 |
| 4617 | |
| 4618 | Add the files for the SMN42 board |
| 4619 | |
| 4620 | commit 5c6d2b5a500f8c49670de8910150b78a41f781fc |
| 4621 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4622 | Date: Wed May 9 11:40:34 2007 +0100 |
| 4623 | |
| 4624 | Remove the deleted files for the SMN42 patch |
| 4625 | |
| 4626 | commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 |
| 4627 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4628 | Date: Wed May 9 11:37:56 2007 +0100 |
| 4629 | |
| 4630 | New board SMN42 branch |
| 4631 | |
| 4632 | commit 29f3be0caf0799ca6b89dfd9824c15619a50000f |
| 4633 | Author: Peter Pearse <peter.pearse@arm.com> |
| 4634 | Date: Wed May 9 10:24:38 2007 +0100 |
| 4635 | |
| 4636 | Makefile permissions |
| 4637 | |
| 4638 | commit b84289b595731e8851df46e893845cc1322c9b9b |
| 4639 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 4640 | Date: Tue May 8 14:17:07 2007 -0500 |
| 4641 | |
| 4642 | 8641hpcn: Fix Makefile after moving pixis to board/freescale. |
| 4643 | |
| 4644 | The OBJTREE != SRCTREE build scenario was broken. |
| 4645 | This fixes it. |
| 4646 | |
| 4647 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 4648 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4649 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 4650 | commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 |
| 4651 | Author: Michal Simek <monstr@monstr.eu> |
| 4652 | Date: Tue May 8 15:57:43 2007 +0200 |
| 4653 | |
| 4654 | add: reading special purpose registers |
| 4655 | |
| 4656 | commit 1a50f164beb065f360fbddb76029607d6b099698 |
| 4657 | Author: Michal Simek <monstr@monstr.eu> |
| 4658 | Date: Tue May 8 14:52:52 2007 +0200 |
| 4659 | |
| 4660 | add: Microblaze V5 exception handling |
| 4661 | |
| 4662 | commit ab874d5047e5d30dbc1e517ff26083efffa98ecb |
| 4663 | Author: Michal Simek <monstr@monstr.eu> |
| 4664 | Date: Tue May 8 14:39:11 2007 +0200 |
| 4665 | |
| 4666 | add: FSL control read and write |
| 4667 | |
| 4668 | commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 |
| 4669 | Author: Piotr Kruszynski <ppk@semihalf.com> |
| 4670 | Date: Tue May 8 13:05:44 2007 +0200 |
| 4671 | |
| 4672 | [Motion-PRO] Add support for I2C, EEPROM and RTC. |
| 4673 | |
| 4674 | commit fa5c2ba123b1bf88455bfc21db5e786ca045029d |
| 4675 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4676 | Date: Tue May 8 10:23:56 2007 +0200 |
| 4677 | |
| 4678 | [Motion-PRO] Add ATA support. Add CF-booting commands to the default |
| 4679 | environment. |
| 4680 | |
| 4681 | commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 |
| 4682 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4683 | Date: Tue May 8 09:39:12 2007 +0200 |
| 4684 | |
| 4685 | [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This |
| 4686 | eliminates networking problems in Linux (timeouts). |
| 4687 | |
| 4688 | commit 1f1369c34b629be94702684d41d3fddf0f6193e7 |
| 4689 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4690 | Date: Tue May 8 09:21:57 2007 +0200 |
| 4691 | |
| 4692 | [Motion-PRO] Enable Flat Device Tree support and modify default environment |
| 4693 | to allow booting of FDT-expecting kernels. |
| 4694 | |
| 4695 | commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db |
| 4696 | Author: Michal Simek <monstr@monstr.eu> |
| 4697 | Date: Mon May 7 23:58:31 2007 +0200 |
| 4698 | |
| 4699 | new: USE_MSR_INTR support |
| 4700 | |
| 4701 | commit 008861a2f3ef2c062744d733787c7e530a1b8761 |
| 4702 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 4703 | Date: Mon May 7 22:36:15 2007 +0200 |
| 4704 | |
| 4705 | [MPC5xxx] There are networking problems on the Motion-PRO board with |
| 4706 | current PHY initalization code (tftp timeouts all the time). This commit |
| 4707 | temporarily disables PHY initalization sequence to make the networking |
| 4708 | operational, until a fix is found. |
| 4709 | |
| 4710 | commit abca901869c3760b6c5fecb825db6c1d91a78a93 |
| 4711 | Author: Wolfgang Denk <wd@denx.de> |
| 4712 | Date: Mon May 7 22:10:36 2007 +0200 |
| 4713 | |
| 4714 | Get rid of duplicated file (see include/configs/sbc8560.h instead) |
| 4715 | |
| 4716 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4717 | |
| 4718 | commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 |
| 4719 | Author: Wolfgang Denk <wd@denx.de> |
| 4720 | Date: Mon May 7 22:07:08 2007 +0200 |
| 4721 | |
| 4722 | Get rid of duplicated file (see doc/README.SBC8560 instead) |
| 4723 | |
| 4724 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4725 | |
| 4726 | commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 |
| 4727 | Author: Michal Simek <monstr@monstr.eu> |
| 4728 | Date: Mon May 7 19:43:10 2007 +0200 |
| 4729 | |
| 4730 | fix: read and write MSR - repair number of parameters |
| 4731 | |
Wolfgang Denk | 725671c | 2007-06-06 16:26:56 +0200 | [diff] [blame] | 4732 | commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee |
| 4733 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4734 | Date: Mon May 7 19:42:49 2007 +0200 |
| 4735 | |
| 4736 | [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file |
| 4737 | |
| 4738 | A '3' got cut off in the formatting of the last patch to automatically |
| 4739 | change the clock speed of the system clock on sequoia board. |
| 4740 | |
| 4741 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4742 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4743 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 4744 | commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 |
| 4745 | Author: Michal Simek <monstr@monstr.eu> |
| 4746 | Date: Mon May 7 19:33:51 2007 +0200 |
| 4747 | |
| 4748 | new: fsl interrupt support |
| 4749 | FSL_Has_data is connected to INTC. |
| 4750 | |
| 4751 | commit 792032baa7d625e34c981ab6df521911bd8dc861 |
| 4752 | Author: Michal Simek <monstr@monstr.eu> |
| 4753 | Date: Mon May 7 19:30:12 2007 +0200 |
| 4754 | |
| 4755 | fix: interrupt handler |
| 4756 | remove asm code |
| 4757 | |
| 4758 | commit f3f001a341ef185d0f13841be5b5dc3395aacc31 |
| 4759 | Author: Michal Simek <monstr@monstr.eu> |
| 4760 | Date: Mon May 7 19:25:08 2007 +0200 |
| 4761 | |
| 4762 | fix: remove asm code |
| 4763 | |
| 4764 | commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 |
| 4765 | Author: Michal Simek <monstr@monstr.eu> |
| 4766 | Date: Mon May 7 19:12:43 2007 +0200 |
| 4767 | |
| 4768 | fix: clean interrupt |
| 4769 | |
| 4770 | commit 42efed6130c8fcf7da881385b5427065d2801757 |
| 4771 | Author: Michal Simek <monstr@monstr.eu> |
| 4772 | Date: Mon May 7 17:22:25 2007 +0200 |
| 4773 | |
| 4774 | fix: interrupt handler for multiple sources |
| 4775 | |
| 4776 | commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 |
| 4777 | Author: Michal Simek <monstr@monstr.eu> |
| 4778 | Date: Mon May 7 17:11:09 2007 +0200 |
| 4779 | |
| 4780 | new: add writing to msr register |
| 4781 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 4782 | commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 |
| 4783 | Author: Markus Klotzbuecher <mk@denx.de> |
| 4784 | Date: Mon May 7 16:43:56 2007 +0200 |
| 4785 | |
| 4786 | Fix an ancient CHANGELOG conflict |
| 4787 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 4788 | commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 |
| 4789 | Author: Timur Tabi <timur@freescale.com> |
| 4790 | Date: Sat May 5 08:12:30 2007 +0200 |
| 4791 | |
| 4792 | 5xxx: write MAC address to mac-address and local-mac-address |
| 4793 | |
| 4794 | Some device trees have a mac-address property, some have local-mac-address, |
| 4795 | and some have both. To support all of these device trees, ftp_cpu_setup() |
| 4796 | should write the MAC address to mac-address and local-mac-address, if they |
| 4797 | exist. |
| 4798 | |
| 4799 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 4800 | Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| 4801 | |
| 4802 | commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 |
| 4803 | Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| 4804 | Date: Sun Apr 29 14:01:54 2007 +0200 |
| 4805 | |
| 4806 | [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| 4807 | |
| 4808 | MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| 4809 | message. Use PVR to distinguish between the two variants, and print proper CPU |
| 4810 | information. |
| 4811 | |
| 4812 | Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| 4813 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| 4814 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 4815 | |
| 4816 | commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 |
| 4817 | Author: Ladislav Michl <ladis@linux-mips.org> |
| 4818 | Date: Wed Apr 25 16:01:26 2007 +0200 |
| 4819 | |
| 4820 | [PATCH] simplify silent console |
| 4821 | |
| 4822 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 4823 | Acked-by: Stefan Roese <sr@denx.de> |
| 4824 | |
| 4825 | commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 |
| 4826 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 4827 | Date: Mon Apr 23 15:30:39 2007 +0200 |
| 4828 | |
| 4829 | [PATCH] Avoid assigning PCI resources from zero address |
| 4830 | |
| 4831 | If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| 4832 | core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| 4833 | was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| 4834 | sentence about "0" being considered an invalid address) -- so, use a reasonable |
| 4835 | starting value of 0x1000 (that's what the most Linux archs are using). |
| 4836 | |
| 4837 | Alternatively, one might have fixed the calls to pci_set_region() individually |
| 4838 | (some code even seems to have taken care of this issue) but that would have |
| 4839 | been a lot more work. :-) |
| 4840 | |
| 4841 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 4842 | Acked-by: Stefan Roese <sr@denx.de> |
| 4843 | |
| 4844 | commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 |
| 4845 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4846 | Date: Mon Apr 23 14:00:11 2007 +0200 |
| 4847 | |
| 4848 | [patch] setenv(...) can delete environmentalvariables |
| 4849 | |
| 4850 | update setenv() function so that entering a NULL value for the |
| 4851 | variable's value will delete the environmental variable |
| 4852 | |
| 4853 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4854 | Acked-by: Stefan Roese <sr@denx.de> |
| 4855 | |
| 4856 | commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 |
| 4857 | Author: Mike Frysinger <vapier@gentoo.org> |
| 4858 | Date: Mon Apr 23 13:54:24 2007 +0200 |
| 4859 | |
| 4860 | [patch] use unsigned char in smc91111 driver for mac |
| 4861 | |
| 4862 | the v_mac variable in the smc91111 driver is declared as a signed char ... |
| 4863 | this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| 4864 | because when it gets printed out, you get a display like: |
| 4865 | 0xFFFFFFE0 and that's no good |
| 4866 | |
| 4867 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| 4868 | |
| 4869 | commit ffc50f9bb194343c6303517a517708457a5eb6b8 |
| 4870 | Author: Michal Simek <monstr@monstr.eu> |
| 4871 | Date: Sat May 5 18:54:42 2007 +0200 |
| 4872 | |
| 4873 | new: FSL and MSR support #2 |
| 4874 | |
| 4875 | commit f7e2e0eb0668136305f78bb9c21be79b48a34247 |
| 4876 | Author: Michal Simek <monstr@monstr.eu> |
| 4877 | Date: Sat May 5 18:27:16 2007 +0200 |
| 4878 | |
| 4879 | new: FSL and MSR support |
| 4880 | |
| 4881 | commit 2f15278c2eb911c668b4fe562130b78cf554d139 |
| 4882 | Author: Wolfgang Denk <wd@denx.de> |
| 4883 | Date: Sat May 5 18:23:11 2007 +0200 |
| 4884 | |
| 4885 | Coding stylke cleanup; update CHANGELOG. |
| 4886 | |
| 4887 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4888 | |
Wolfgang Denk | 2f15278 | 2007-05-05 18:23:11 +0200 | [diff] [blame] | 4889 | commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 |
| 4890 | Author: Wolfgang Denk <wd@denx.de> |
| 4891 | Date: Sat May 5 18:05:02 2007 +0200 |
| 4892 | |
| 4893 | Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. |
| 4894 | |
| 4895 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4896 | |
Wolfgang Denk | 885ec89 | 2007-05-05 18:05:02 +0200 | [diff] [blame] | 4897 | commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 |
| 4898 | Author: Wolfgang Denk <wd@denx.de> |
| 4899 | Date: Sat May 5 17:15:50 2007 +0200 |
| 4900 | |
| 4901 | Make "file" command happy with some config.mk files; update CHANGELOG |
| 4902 | |
Wolfgang Denk | 2f15278 | 2007-05-05 18:23:11 +0200 | [diff] [blame] | 4903 | commit e3b8c78bc2489c27ae020986ef0eaca684866cef |
| 4904 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4905 | Date: Sat May 5 08:32:14 2007 +0200 |
| 4906 | |
| 4907 | ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz |
| 4908 | |
| 4909 | The AMCC Secquoia board has been changed in a new revision from using a |
| 4910 | 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD |
| 4911 | indicates the difference. This patch reads that bit and uses the correct |
| 4912 | clock speed for the board. This code is backward compatable will all |
| 4913 | prior boards. All prior boards will be read as 33.000. |
| 4914 | |
| 4915 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 4916 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4917 | |
| 4918 | commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 |
| 4919 | Author: Stefan Roese <sr@denx.de> |
| 4920 | Date: Sat May 5 08:29:01 2007 +0200 |
| 4921 | |
| 4922 | ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting |
| 4923 | |
| 4924 | Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big |
| 4925 | for the 4k NAND boot image so define bus_frequency to 133MHz here |
| 4926 | which is save for the refresh counter setup. |
| 4927 | |
| 4928 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4929 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 4930 | commit 2f550ab976405300f5b07bf2890800840d0aa05f |
| 4931 | Author: Timur Tabi <timur@freescale.com> |
| 4932 | Date: Sat May 5 08:12:30 2007 +0200 |
| 4933 | |
| 4934 | 5xxx: write MAC address to mac-address and local-mac-address |
| 4935 | |
| 4936 | Some device trees have a mac-address property, some have local-mac-address, |
| 4937 | and some have both. To support all of these device trees, ftp_cpu_setup() |
| 4938 | should write the MAC address to mac-address and local-mac-address, if they |
| 4939 | exist. |
| 4940 | |
| 4941 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 4942 | Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| 4943 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 4944 | commit a79886590593ba1d667c840caa4940c61639f18f |
| 4945 | Author: Thomas Knobloch <knobloch@siemens.com> |
| 4946 | Date: Sat May 5 07:04:42 2007 +0200 |
| 4947 | |
| 4948 | NAND: Wrong calculation of page number in nand_block_bad() |
| 4949 | |
| 4950 | In case that there is no memory based bad block table available the |
| 4951 | function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call |
| 4952 | nand_block_bad() directly. When parameter 'getchip' is set to zero, |
| 4953 | nand_block_bad() will not right shift the offset to calculate the |
| 4954 | correct page number. |
| 4955 | |
| 4956 | Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| 4957 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 4958 | |
| 4959 | commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 |
| 4960 | Author: Wolfgang Denk <wd@denx.de> |
| 4961 | Date: Fri May 4 10:02:33 2007 +0200 |
| 4962 | |
| 4963 | Fix initrd length corruption in bootm command. |
| 4964 | |
| 4965 | When using FDT Images, the length of an inital ramdisk was |
| 4966 | overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). |
| 4967 | |
| 4968 | Patches by Timur Tabi & Johns Daniel. |
| 4969 | |
| 4970 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4971 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 4972 | commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 |
| 4973 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 4974 | Date: Thu May 3 19:43:52 2007 -0500 |
| 4975 | |
| 4976 | mpc83xx: fix trivial error in MAKEALL |
| 4977 | |
| 4978 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 4979 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 4980 | commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a |
| 4981 | Author: Wolfgang Denk <wd@denx.de> |
| 4982 | Date: Thu May 3 16:34:41 2007 +0200 |
| 4983 | |
| 4984 | Update board configuration for STX GP3SSA board: |
| 4985 | |
| 4986 | Enable hush shell, environment in flash rather in EEPROM, |
| 4987 | more user-friendly default environment, etc. |
| 4988 | The simple EEPROM environment can be selected easily in the board |
| 4989 | config file. |
| 4990 | |
| 4991 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 4992 | |
Wolfgang Denk | c64a89d | 2007-05-03 16:34:41 +0200 | [diff] [blame] | 4993 | commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 |
| 4994 | Author: Wolfgang Denk <wd@denx.de> |
| 4995 | Date: Tue Apr 24 14:37:49 2007 +0200 |
| 4996 | |
| 4997 | Cleanup STX GP3SSA code; fix build and compile problems. |
| 4998 | |
| 4999 | commit 35171dc04e028ecacc23ad916a66295472555dbf |
| 5000 | Author: Dan Malek <dan@embeddedalley.com> |
| 5001 | Date: Fri Jan 5 09:15:34 2007 +0100 |
| 5002 | |
| 5003 | Add support for STX GP3SSA (stxssa) Board |
| 5004 | |
| 5005 | Signed-off-by Dan Malek, <dan@embeddedalley.com> |
| 5006 | |
Wolfgang Denk | be5d72d | 2007-08-13 21:57:53 +0200 | [diff] [blame] | 5007 | commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 |
| 5008 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5009 | Date: Wed May 2 13:31:53 2007 +0200 |
| 5010 | |
| 5011 | macb: Don't restart autonegotiation if we already have link |
| 5012 | |
| 5013 | Rework macb_phy_init so that it doesn't attempt to re-negotiate if the |
| 5014 | link is already up. |
| 5015 | |
| 5016 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5017 | |
| 5018 | commit 04fcb5d38bc90779cd9a710d60702075986f0e29 |
| 5019 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5020 | Date: Wed May 2 13:22:38 2007 +0200 |
| 5021 | |
| 5022 | macb: Introduce a few barriers when dealing with DMA descriptors |
| 5023 | |
| 5024 | There were a few theoretical possibilities that the compiler might |
| 5025 | optimize away DMA descriptor reads and/or writes and thus cause |
| 5026 | synchronization problems with the hardware. Insert barriers where |
| 5027 | we depend on reads/writes actually hitting memory. |
| 5028 | |
| 5029 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5030 | |
Wolfgang Denk | 885ec89 | 2007-05-05 18:05:02 +0200 | [diff] [blame] | 5031 | commit ffa621a0d12a1ccd81c936c567f8917a213787a8 |
| 5032 | Author: Andy Fleming <afleming@freescale.com> |
| 5033 | Date: Sat Feb 24 01:08:13 2007 -0600 |
| 5034 | |
| 5035 | Cleaned up some 85xx PCI bugs |
| 5036 | |
| 5037 | * Cleaned up the CDS PCI Config Tables and added NULL entries to |
| 5038 | the end |
| 5039 | * Fixed PCIe LAWBAR assignemt to use the cpu-relative address |
| 5040 | * Fixed 85xx PCI code to assign powar region sizes based on the |
| 5041 | config values (rather than hard-coding them) |
| 5042 | * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address |
| 5043 | |
| 5044 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5045 | |
| 5046 | commit 6743105988fc44d5b0d30388c790607835aae7a6 |
| 5047 | Author: Andy Fleming <afleming@freescale.com> |
| 5048 | Date: Mon Apr 23 02:54:25 2007 -0500 |
| 5049 | |
| 5050 | Add support for the 8568 MDS board |
| 5051 | |
| 5052 | This included some changes to common files: |
| 5053 | * Add 8568 processor SVR to various places |
| 5054 | * Add support for setting the qe bus-frequency value in the dts |
| 5055 | * Add the 8568MDS target to the Makefile |
| 5056 | |
| 5057 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5058 | |
| 5059 | commit af1c2b84bf27c8565baddc82d1abb93700d10e2e |
| 5060 | Author: David Updegraff <dave@cray.com> |
| 5061 | Date: Fri Apr 20 14:34:48 2007 -0500 |
| 5062 | |
| 5063 | Add support for treating unknown PHYs as generic PHYs. |
| 5064 | |
| 5065 | When bringing up u-boot on new boards, PHY support sometimes gets |
| 5066 | neglected. Most PHYs don't really need any special support, |
| 5067 | though. By adding a generic entry that always matches if nothing |
| 5068 | else does, we can provide support for "unsupported" PHYs for the |
| 5069 | tsec. |
| 5070 | |
| 5071 | The generic PHY driver supports most PHYs, including gigabit. |
| 5072 | |
| 5073 | Signed-off-by: David Updegraff <dave@cray.com> |
| 5074 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5075 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 5076 | commit a75af9bfd8fff0499efdbb90601cec5a2afef117 |
| 5077 | Author: James Yang <James.Yang@freescale.com> |
| 5078 | Date: Wed Feb 7 15:28:04 2007 -0600 |
| 5079 | |
| 5080 | Conditionalize 8641 Rev1.0 MCM workarounds |
| 5081 | |
| 5082 | Signed-off-by: James Yang <James.Yang@freescale.com> |
| 5083 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5084 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 5085 | commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 |
| 5086 | Author: Timur Tabi <timur@freescale.com> |
| 5087 | Date: Mon Apr 30 13:59:50 2007 -0500 |
| 5088 | |
| 5089 | Fix memory initialization on MPC8349E-mITX |
| 5090 | |
| 5091 | Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. |
| 5092 | This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary |
| 5093 | on some ITX boards, notably those with a revision 3.1 CPU. |
| 5094 | |
| 5095 | Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into |
| 5096 | ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. |
| 5097 | |
| 5098 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 5099 | Acked-by: Michael Benedict <MBenedict@twacs.com> |
| 5100 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 5101 | |
| 5102 | commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 |
| 5103 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 5104 | Date: Mon Apr 30 15:26:21 2007 -0500 |
| 5105 | |
| 5106 | mpc83xx: replace elaborate boottime verbosity with 'clocks' command |
| 5107 | |
| 5108 | and fix CPU: to align with Board: display text. |
| 5109 | |
| 5110 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 5111 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 5112 | commit c1ab82669d9525998c34e802a12cad662723f22a |
| 5113 | Author: James Yang <James.Yang@freescale.com> |
| 5114 | Date: Fri Mar 16 13:02:53 2007 -0500 |
| 5115 | |
| 5116 | Rewrote picos_to_clk() to avoid rounding errors. |
| 5117 | Clarified that conversion is to DRAM clocks rather than platform clocks. |
| 5118 | Made function static to spd_sdram.c. |
| 5119 | |
| 5120 | Signed-off-by: James Yang <James.Yang@freescale.com> |
| 5121 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5122 | |
Wolfgang Denk | 2f15278 | 2007-05-05 18:23:11 +0200 | [diff] [blame] | 5123 | commit 8b39501d28754e72726ce7fb02310e56dbdf116a |
| 5124 | Author: Stefan Roese <sr@denx.de> |
| 5125 | Date: Sun Apr 29 14:13:01 2007 +0200 |
| 5126 | |
| 5127 | ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver |
| 5128 | |
| 5129 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5130 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 5131 | commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 |
| 5132 | Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| 5133 | Date: Sun Apr 29 14:01:54 2007 +0200 |
| 5134 | |
| 5135 | [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| 5136 | |
| 5137 | MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| 5138 | message. Use PVR to distinguish between the two variants, and print proper CPU |
| 5139 | information. |
| 5140 | |
| 5141 | Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| 5142 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| 5143 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 5144 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 5145 | commit 5c5d3242935cf3543af01142627494434834cf98 |
| 5146 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 5147 | Date: Wed Apr 25 12:34:38 2007 -0500 |
| 5148 | |
| 5149 | mpc83xx: minor fixups for 8313rdb introduction |
| 5150 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 5151 | commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 |
| 5152 | Author: Ladislav Michl <ladis@linux-mips.org> |
| 5153 | Date: Wed Apr 25 16:01:26 2007 +0200 |
| 5154 | |
| 5155 | [PATCH] simplify silent console |
| 5156 | |
| 5157 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 5158 | Acked-by: Stefan Roese <sr@denx.de> |
| 5159 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 5160 | commit 144876a380f5756f57412caf74c1d6dc201dd796 |
| 5161 | Author: Michal Simek <monstr@monstr.eu> |
| 5162 | Date: Tue Apr 24 23:01:02 2007 +0200 |
| 5163 | |
| 5164 | [PATCH] MTD partition support, JFFS2 support |
| 5165 | |
Wolfgang Denk | 2f15278 | 2007-05-05 18:23:11 +0200 | [diff] [blame] | 5166 | commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb |
| 5167 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 5168 | Date: Tue Apr 24 14:03:45 2007 +0200 |
| 5169 | |
| 5170 | ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. |
| 5171 | |
| 5172 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 5173 | |
Wolfgang Denk | 885ec89 | 2007-05-05 18:05:02 +0200 | [diff] [blame] | 5174 | commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d |
| 5175 | Author: Andy Fleming <afleming@freescale.com> |
| 5176 | Date: Mon Apr 23 02:37:47 2007 -0500 |
| 5177 | |
| 5178 | Reworked 85xx speed detection code |
| 5179 | |
| 5180 | Changed the code to read the registers and calculate the clock |
| 5181 | rates, rather than using a "switch" statement. |
| 5182 | |
| 5183 | Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| 5184 | |
| 5185 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5186 | |
| 5187 | commit 81f481ca708ed6a56bf9c410e3191dbad581c565 |
| 5188 | Author: Andy Fleming <afleming@freescale.com> |
| 5189 | Date: Mon Apr 23 02:24:28 2007 -0500 |
| 5190 | |
| 5191 | Enable 8544 support |
| 5192 | |
| 5193 | * Add support to the Makefile |
| 5194 | * Add 8544 configuration support to the tsec driver |
| 5195 | * Add 8544 SVR numbers to processor.h |
| 5196 | |
| 5197 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5198 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5199 | |
| 5200 | commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe |
| 5201 | Author: Andy Fleming <afleming@freescale.com> |
| 5202 | Date: Fri Feb 23 17:12:25 2007 -0600 |
| 5203 | |
| 5204 | Support 1G size on 8548 |
| 5205 | |
| 5206 | e500v2 and newer cores support 1G page sizes. |
| 5207 | |
| 5208 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5209 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5210 | |
| 5211 | commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 |
| 5212 | Author: Andy Fleming <afleming@freescale.com> |
| 5213 | Date: Fri Feb 23 17:11:16 2007 -0600 |
| 5214 | |
| 5215 | Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG |
| 5216 | |
| 5217 | The other pagesz constants use one letter to specify order of |
| 5218 | magnitude. Also change the one reference to it in mpc8548cds/init.S |
| 5219 | |
| 5220 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5221 | |
| 5222 | commit 1f9a318cea14272edd10d63739e2d326c90f430e |
| 5223 | Author: Andy Fleming <afleming@freescale.com> |
| 5224 | Date: Fri Feb 23 16:28:46 2007 -0600 |
| 5225 | |
| 5226 | Only set ddrioovcr for 8548 rev1. |
| 5227 | |
| 5228 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5229 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5230 | |
| 5231 | commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 |
| 5232 | Author: Andy Fleming <afleming@freescale.com> |
| 5233 | Date: Sat Feb 24 01:16:45 2007 -0600 |
| 5234 | |
| 5235 | Tweak DDR ECC error counter |
| 5236 | |
| 5237 | Enable single-bit error counter when memory was cleared by ddr controller. |
| 5238 | |
| 5239 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5240 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 5241 | |
| 5242 | commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b |
| 5243 | Author: Timur Tabi <timur@freescale.com> |
| 5244 | Date: Mon Feb 12 13:34:55 2007 -0600 |
| 5245 | |
| 5246 | 85xx: write MAC address to mac-address and local-mac-address |
| 5247 | |
| 5248 | Some device trees have a mac-address property, some have local-mac-address, |
| 5249 | and some have both. To support all of these device trees, ftp_cpu_setup() |
| 5250 | should write the MAC address to mac-address and local-mac-address, if they |
| 5251 | exist. |
| 5252 | |
| 5253 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 5254 | |
| 5255 | commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 |
| 5256 | Author: Andy Fleming <afleming@freescale.com> |
| 5257 | Date: Mon Apr 23 01:44:44 2007 -0500 |
| 5258 | |
| 5259 | Some 85xx cpu cleanups |
| 5260 | |
| 5261 | * Cleaned up the TSR[WIS] clearing |
| 5262 | * Cleaned up DMA initialization |
| 5263 | |
| 5264 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5265 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5266 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 5267 | |
| 5268 | commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb |
| 5269 | Author: Andy Fleming <afleming@freescale.com> |
| 5270 | Date: Mon Apr 23 01:32:22 2007 -0500 |
| 5271 | |
| 5272 | Add cpu support for the 8544 |
| 5273 | |
| 5274 | Recognize new SVR values, and add a few register definitions |
| 5275 | |
| 5276 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5277 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5278 | Acked-by: Andy Fleming <afleming@freescale.com> |
| 5279 | |
| 5280 | commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae |
| 5281 | Author: Jon Loeliger <jdl@freescale.com> |
| 5282 | Date: Wed Apr 11 16:51:02 2007 -0500 |
| 5283 | |
| 5284 | Add MPC8544DS basic port board files. |
| 5285 | |
| 5286 | Add board port under new board/freescale directory |
| 5287 | structure and reuse existing PIXIS FPGA support there. |
| 5288 | |
| 5289 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5290 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5291 | |
| 5292 | commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa |
| 5293 | Author: Jon Loeliger <jdl@freescale.com> |
| 5294 | Date: Wed Apr 11 16:50:57 2007 -0500 |
| 5295 | |
| 5296 | Add MPC8544DS main configuration file. |
| 5297 | |
| 5298 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5299 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5300 | |
| 5301 | commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 |
| 5302 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 5303 | Date: Wed Dec 27 22:07:15 2006 +0300 |
| 5304 | |
| 5305 | Fix PCI I/O space mapping on Freescale MPC85x0ADS |
| 5306 | |
| 5307 | The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit |
| 5308 | 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's |
| 5309 | describing the local address window used for the PCI I/O space accesses -- fix |
| 5310 | this and carry over the necessary changes into the MPC8560ADS code since the |
| 5311 | PCI I/O space mapping was also broken for this board (by the earlier commit |
| 5312 | 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how |
| 5313 | the PCI I/O space must be mapped to all the MPC85xx board config. headers. |
| 5314 | |
| 5315 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 5316 | |
| 5317 | board/mpc8540ads/init.S | 4 ++-- |
| 5318 | board/mpc8560ads/init.S | 4 ++-- |
| 5319 | include/configs/MPC8540ADS.h | 5 ++--- |
| 5320 | include/configs/MPC8541CDS.h | 2 +- |
| 5321 | include/configs/MPC8548CDS.h | 2 +- |
| 5322 | include/configs/MPC8560ADS.h | 8 ++++---- |
| 5323 | 6 files changed, 12 insertions(+), 13 deletions(-) |
| 5324 | |
| 5325 | commit 96629cbabdb727d4a5e62542deefc01d498db6dc |
| 5326 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 5327 | Date: Tue Dec 5 16:42:30 2006 +0800 |
| 5328 | |
| 5329 | u-boot: Fix e500 v2 core reset bug |
| 5330 | |
| 5331 | The following patch fixes the e500 v2 core reset bug. |
| 5332 | For e500 v2 core, a new reset control register is added to reset the |
| 5333 | processor. |
| 5334 | |
| 5335 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 5336 | |
| 5337 | commit 63247a5acd58032e6cf33f525bc3923b467bac88 |
| 5338 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 5339 | Date: Wed Dec 20 11:01:00 2006 +0800 |
| 5340 | |
| 5341 | u-boot: v2: Remove the fixed TLB and LAW entrynubmer |
| 5342 | |
| 5343 | Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW |
| 5344 | entry number to control the loop. This can reduce the potential risk |
| 5345 | for the 85xx processor increasing its TLB adn LAW entry number. |
| 5346 | |
| 5347 | Signed-off-by: Swarthout Edward <swarthout@freescale.com> |
| 5348 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 5349 | |
| 5350 | commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf |
| 5351 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 5352 | Date: Mon Dec 18 17:01:04 2006 +0800 |
| 5353 | |
| 5354 | u-boot: Fix the 85xxcds tsec bug |
| 5355 | |
| 5356 | Fix the 85xxcds tsec bug. |
| 5357 | When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. |
| 5358 | |
| 5359 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 5360 | |
| 5361 | commit 7337b237ffc4aaf1b9467024fe472a880d852598 |
| 5362 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 5363 | Date: Fri Dec 15 14:43:31 2006 +0800 |
| 5364 | |
| 5365 | u-boot: Fix CPU2 errata on MPC8548CDS board |
| 5366 | |
| 5367 | This patch apply workaround of CPU2 errata on MPC8548CDS board. |
| 5368 | |
| 5369 | Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| 5370 | |
| 5371 | commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 |
| 5372 | Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> |
| 5373 | Date: Mon Dec 18 16:25:15 2006 +0800 |
| 5374 | |
| 5375 | u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default |
| 5376 | |
| 5377 | This patch disables MPC8548CDS 2T_TIMING for DDR by default. |
| 5378 | |
| 5379 | Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| 5380 | |
| 5381 | commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 |
| 5382 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| 5383 | Date: Thu Dec 14 14:14:55 2006 +0800 |
| 5384 | |
| 5385 | u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board |
| 5386 | |
| 5387 | Enable PCI function and add PEX & rapidio memory map on MPC8548CDS |
| 5388 | board. |
| 5389 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 5390 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 5391 | commit 96b8a05432f346f36493535c85320b70ec9c7c1b |
| 5392 | Author: Scott Wood <scottwood@freescale.com> |
| 5393 | Date: Mon Apr 16 14:54:15 2007 -0500 |
| 5394 | |
| 5395 | mpc83xx: Add MPC8313ERDB support. |
| 5396 | |
| 5397 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5398 | |
| 5399 | commit 49ea3b6eafe606285ae4d5c378026153dde53200 |
| 5400 | Author: Scott Wood <scottwood@freescale.com> |
| 5401 | Date: Mon Apr 16 14:34:21 2007 -0500 |
| 5402 | |
| 5403 | mpc83xx: Add generic PCI setup code. |
| 5404 | |
| 5405 | Board code can now request the generic setup code rather than having to |
| 5406 | copy-and-paste it for themselves. Boards should be converted to use this |
| 5407 | once they're tested with it. |
| 5408 | |
| 5409 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5410 | |
| 5411 | commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea |
| 5412 | Author: Scott Wood <scottwood@freescale.com> |
| 5413 | Date: Mon Apr 16 14:34:19 2007 -0500 |
| 5414 | |
| 5415 | mpc83xx: Add 831x support to speed.c. |
| 5416 | |
| 5417 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5418 | |
| 5419 | commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f |
| 5420 | Author: Scott Wood <scottwood@freescale.com> |
| 5421 | Date: Mon Apr 16 14:34:18 2007 -0500 |
| 5422 | |
| 5423 | mpc83xx: Add 831x support to global_data.h |
| 5424 | |
| 5425 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5426 | |
| 5427 | commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 |
| 5428 | Author: Scott Wood <scottwood@freescale.com> |
| 5429 | Date: Mon Apr 16 14:34:16 2007 -0500 |
| 5430 | |
| 5431 | mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). |
| 5432 | |
| 5433 | Rather than misleadingly define PVR_83xx as the specific type of 83xx |
| 5434 | being built for, the PVR of each core revision is defined. checkcpu() now |
| 5435 | prints the core that it detects, rather than aborting if it doesn't find |
| 5436 | what it thinks it wants. |
| 5437 | |
| 5438 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5439 | |
| 5440 | commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 |
| 5441 | Author: Scott Wood <scottwood@freescale.com> |
| 5442 | Date: Mon Apr 16 14:34:15 2007 -0500 |
| 5443 | |
| 5444 | mpc83xx: Recognize SPR values for MPC8311 and MPC8313. |
| 5445 | |
| 5446 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5447 | |
| 5448 | commit d87c57b201b4572d16f1b642998faa00c9912b16 |
| 5449 | Author: Scott Wood <scottwood@freescale.com> |
| 5450 | Date: Mon Apr 16 14:31:55 2007 -0500 |
| 5451 | |
| 5452 | mpc83xx: Add register definitions for MPC831x. |
| 5453 | |
| 5454 | Signed-off-by: Scott Wood <scottwood@freescale.com> |
| 5455 | |
Wolfgang Denk | 4ef218f | 2007-07-10 00:01:28 +0200 | [diff] [blame] | 5456 | commit 7fc4c71a143be8666d70803fb25ae60379c95622 |
| 5457 | Author: Stefan Roese <sr@denx.de> |
| 5458 | Date: Mon Apr 23 15:39:59 2007 +0200 |
| 5459 | |
| 5460 | Fix file mode |
| 5461 | |
| 5462 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5463 | |
| 5464 | commit 38257988abfe74d459ca2ad748b109ca04e4efe1 |
| 5465 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 5466 | Date: Mon Apr 23 15:30:39 2007 +0200 |
| 5467 | |
| 5468 | [PATCH] Avoid assigning PCI resources from zero address |
| 5469 | |
| 5470 | If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| 5471 | core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| 5472 | was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| 5473 | sentence about "0" being considered an invalid address) -- so, use a reasonable |
| 5474 | starting value of 0x1000 (that's what the most Linux archs are using). |
| 5475 | |
| 5476 | Alternatively, one might have fixed the calls to pci_set_region() individually |
| 5477 | (some code even seems to have taken care of this issue) but that would have |
| 5478 | been a lot more work. :-) |
| 5479 | |
| 5480 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| 5481 | Acked-by: Stefan Roese <sr@denx.de> |
| 5482 | |
| 5483 | commit afb903a2eb9436baa9270ccc0c27082d86497d89 |
| 5484 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 5485 | Date: Mon Apr 23 14:00:11 2007 +0200 |
| 5486 | |
| 5487 | [patch] setenv(...) can delete environmentalvariables |
| 5488 | |
| 5489 | update setenv() function so that entering a NULL value for the |
| 5490 | variable's value will delete the environmental variable |
| 5491 | |
| 5492 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 5493 | Acked-by: Stefan Roese <sr@denx.de> |
| 5494 | |
| 5495 | commit 36f104e5caa747d568eff26b369565af57c2ffa6 |
| 5496 | Author: Mike Frysinger <vapier@gentoo.org> |
| 5497 | Date: Mon Apr 23 13:54:24 2007 +0200 |
| 5498 | |
| 5499 | [patch] use unsigned char in smc91111 driver for mac |
| 5500 | |
| 5501 | the v_mac variable in the smc91111 driver is declared as a signed char ... |
| 5502 | this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| 5503 | because when it gets printed out, you get a display like: |
| 5504 | 0xFFFFFFE0 and that's no good |
| 5505 | |
| 5506 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| 5507 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 5508 | commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 |
| 5509 | Author: Rodolfo Giometti <giometti@enneenne.com> |
| 5510 | Date: Mon Apr 23 13:10:52 2007 +0200 |
| 5511 | |
| 5512 | USB: (Another) delay for crappy USB keys. |
| 5513 | |
| 5514 | Some USB keys are slow in giving back an answer when the Root HUB |
| 5515 | enables power lines. |
| 5516 | |
| 5517 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| 5518 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 5519 | commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 |
| 5520 | Author: Stefan Roese <sr@denx.de> |
| 5521 | Date: Mon Apr 23 12:00:22 2007 +0200 |
| 5522 | |
| 5523 | Remove BOARDLIBS usage completely |
| 5524 | |
| 5525 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5526 | |
Wolfgang Denk | d62f64c | 2007-05-16 00:13:33 +0200 | [diff] [blame] | 5527 | commit 32556443840f127170e4baa8bdd5b567039f6c36 |
| 5528 | Author: Michal Simek <monstr@monstr.eu> |
| 5529 | Date: Sat Apr 21 21:07:22 2007 +0200 |
| 5530 | |
| 5531 | [PATCH] SystemACE support for Microblaze |
| 5532 | |
| 5533 | commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f |
| 5534 | Author: Michal Simek <monstr@monstr.eu> |
| 5535 | Date: Sat Apr 21 21:02:40 2007 +0200 |
| 5536 | |
| 5537 | 16bit read/write little endian |
| 5538 | |
| 5539 | commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 |
| 5540 | Author: Michal Simek <monstr@monstr.eu> |
| 5541 | Date: Sat Apr 21 20:53:31 2007 +0200 |
| 5542 | |
| 5543 | Change ML401 parameters - Xilinx BSP |
| 5544 | |
Wolfgang Denk | 5499645 | 2007-05-05 17:15:50 +0200 | [diff] [blame] | 5545 | commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d |
| 5546 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5547 | Date: Wed Feb 28 05:37:29 2007 -0600 |
| 5548 | |
| 5549 | mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. |
| 5550 | |
| 5551 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 5552 | |
| 5553 | commit 79cb47391eebef85acadb3f6961ef6c55cace6ac |
| 5554 | Author: Zhang Wei <wei.zhang@freescale.com> |
| 5555 | Date: Fri Jan 19 10:42:37 2007 +0800 |
| 5556 | |
| 5557 | Enable LAWs for MPC8641 PCI-Ex2. |
| 5558 | |
| 5559 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 5560 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5561 | |
| 5562 | commit bd7851ce1e1f140665b520026abf1042968b1102 |
| 5563 | Author: Jon Loeliger <jdl@freescale.com> |
| 5564 | Date: Fri Apr 20 14:12:26 2007 -0500 |
| 5565 | |
| 5566 | mpc86xx; Write MAC address to mac-address and local-mac-address |
| 5567 | |
| 5568 | Some device trees have a mac-address property, some have local-mac-address, |
| 5569 | and some have both. To support all of these device trees, ftp_cpu_setup() |
| 5570 | should write the MAC address to mac-address and local-mac-address, if they |
| 5571 | exist. |
| 5572 | |
| 5573 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 5574 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5575 | |
| 5576 | commit 7dbdf28b8bd855a8530dc3292e4982575a197060 |
| 5577 | Author: Jon Loeliger <jdl@freescale.com> |
| 5578 | Date: Fri Apr 20 14:11:38 2007 -0500 |
| 5579 | |
| 5580 | mpc86xx: protect memcpy to bad address if a mac-address is missing from dt |
| 5581 | |
| 5582 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 5583 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 5584 | |
Wolfgang Denk | c64a89d | 2007-05-03 16:34:41 +0200 | [diff] [blame] | 5585 | commit 14da5f7675bbb427c469e3f45006e027b6e21db9 |
| 5586 | Author: Wolfgang Denk <wd@denx.de> |
| 5587 | Date: Fri Apr 20 17:43:28 2007 +0200 |
| 5588 | |
| 5589 | Cleanup compiler warnings, update CHANGELOG |
| 5590 | |
| 5591 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 5592 | |
Wolfgang Denk | 14da5f7 | 2007-04-20 17:43:28 +0200 | [diff] [blame] | 5593 | commit 6923565db12af34fd5e02d354ee65a8c78ac460f |
| 5594 | Author: Detlev Zundel <dzu@denx.de> |
| 5595 | Date: Fri Apr 20 12:01:47 2007 +0200 |
| 5596 | |
| 5597 | Fix breakage of NC650 board with respect to nand support. |
| 5598 | |
| 5599 | Signed-off-by: Detlev Zundel <dzu@denx.de> |
| 5600 | |
| 5601 | commit 39f23cd90947639ac278a18ff277ec786b5ac167 |
| 5602 | Author: Domen Puncer <domen.puncer@telargo.com> |
| 5603 | Date: Fri Apr 20 11:13:16 2007 +0200 |
| 5604 | |
| 5605 | [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation |
| 5606 | |
| 5607 | G2 core reference manual says decrementer and time base |
| 5608 | are decreasing/increasing once every 4 bus clock cycles. |
| 5609 | Lets fix it, so time in Linux won't run twice as fast |
| 5610 | |
| 5611 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| 5612 | Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| 5613 | |
| 5614 | commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56 |
| 5615 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 5616 | Date: Thu Apr 19 23:14:39 2007 -0400 |
| 5617 | |
| 5618 | Fix serious pointer bug with bootm and reserve map. |
| 5619 | |
| 5620 | What was suppose to be a stack variable was declared as a pointer, |
| 5621 | overwriting random memory. |
| 5622 | Also moved the libfdt.a requirement into the main Makefile. That is |
| 5623 | The U-Boot Way. |
| 5624 | |
Wolfgang Denk | 2f15278 | 2007-05-05 18:23:11 +0200 | [diff] [blame] | 5625 | commit d21686263574e95cb3e9e9b0496f968b1b897fdb |
| 5626 | Author: Stefan Roese <sr@denx.de> |
| 5627 | Date: Thu Apr 19 09:53:52 2007 +0200 |
| 5628 | |
| 5629 | ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai |
| 5630 | |
| 5631 | Previous versions used full wait states for the chip select #1 which |
| 5632 | is connected to the Xilinix SystemACE controller on the AMCC Katmai |
| 5633 | evaluation board. This leads to really slow access and therefore low |
| 5634 | performance. This patch now sets up the chip select a lot faster |
| 5635 | resulting in much better read/write performance of the Linux driver. |
| 5636 | |
| 5637 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5638 | |
Wolfgang Denk | 14da5f7 | 2007-04-20 17:43:28 +0200 | [diff] [blame] | 5639 | commit 37837828d89084879bee2f2b8c7c68d4695940df |
| 5640 | Author: Wolfgang Denk <wd@denx.de> |
| 5641 | Date: Wed Apr 18 17:49:29 2007 +0200 |
| 5642 | |
| 5643 | Clenaup, update CHANGELOG |
| 5644 | |
| 5645 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 5646 | |
Wolfgang Denk | 3783782 | 2007-04-18 17:49:29 +0200 | [diff] [blame] | 5647 | commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449 |
| 5648 | Author: Wolfgang Denk <wd@denx.de> |
| 5649 | Date: Wed Apr 18 17:20:58 2007 +0200 |
| 5650 | |
| 5651 | Update CHANGELOG |
| 5652 | |
| 5653 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 5654 | |
Wolfgang Denk | fd094c6 | 2007-04-18 17:20:58 +0200 | [diff] [blame] | 5655 | commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b |
| 5656 | Author: Wolfgang Denk <wd@denx.de> |
| 5657 | Date: Wed Apr 18 17:07:26 2007 +0200 |
| 5658 | |
| 5659 | Cleanup, update CHANGELOG |
| 5660 | |
| 5661 | Sigend-off-by: Wolfgang Denk <wd@denx.de> |
| 5662 | |
Wolfgang Denk | b99c1e6 | 2007-04-18 16:53:52 +0200 | [diff] [blame] | 5663 | commit 5f6c732affea9647762d27a4617a2ae64c52dceb |
| 5664 | Author: Wolfgang Denk <wd@denx.de> |
| 5665 | Date: Wed Apr 18 16:17:46 2007 +0200 |
| 5666 | |
| 5667 | Update CHANGELOG |
| 5668 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 5669 | commit ad4eb555671d97f96dc56eab55103b1f86874b01 |
| 5670 | Author: Wolfgang Denk <wd@denx.de> |
| 5671 | Date: Wed Apr 18 14:30:39 2007 +0200 |
| 5672 | |
| 5673 | MCC200 board: remove warning which is obsolete after PSoC firmware changes |
| 5674 | |
| 5675 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 5676 | |
| 5677 | commit 3747a3f010b2b1442dec3e871c69788b6017aaae |
| 5678 | Author: Domen Puncer <domen.puncer@telargo.com> |
| 5679 | Date: Wed Apr 18 12:11:05 2007 +0200 |
| 5680 | |
| 5681 | [PATCH] icecube/lite5200b: document wakeup from low-power support |
| 5682 | |
| 5683 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| 5684 | |
| 5685 | commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 |
| 5686 | Author: Stefan Roese <sr@denx.de> |
| 5687 | Date: Wed Apr 18 12:07:47 2007 +0200 |
| 5688 | |
| 5689 | ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM |
| 5690 | |
| 5691 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5692 | |
| 5693 | commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f |
| 5694 | Author: Stefan Roese <sr@denx.de> |
| 5695 | Date: Wed Apr 18 12:05:59 2007 +0200 |
| 5696 | |
| 5697 | ppc4xx: Add output for bootrom location to 405EZ ports |
| 5698 | |
| 5699 | Now 405EZ ports also show upon bootup from which boot device |
| 5700 | they are configured to boot: |
| 5701 | |
| 5702 | U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) |
| 5703 | |
| 5704 | CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) |
| 5705 | Bootstrap Option E - Boot ROM Location EBC (32 bits) |
| 5706 | 16 kB I-Cache 16 kB D-Cache |
| 5707 | Board: Acadia - AMCC PPC405EZ Evaluation Board |
| 5708 | |
| 5709 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 5710 | |
Wolfgang Denk | 14da5f7 | 2007-04-20 17:43:28 +0200 | [diff] [blame] | 5711 | commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85 |
| 5712 | Author: Peter Pearse <peter.pearse@arm.com> |
| 5713 | Date: Tue Apr 17 13:30:33 2007 +0100 |
| 5714 | |
| 5715 | Move ppearse to ARM board list |
| 5716 | Add Konstantin Kletschke for scb9328. |
| 5717 | Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| 5718 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 5719 | commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 |
| 5720 | Author: Domen Puncer <domen.puncer@telargo.com> |
| 5721 | Date: Mon Apr 16 14:00:13 2007 +0200 |
| 5722 | |
| 5723 | [PATCH] icecube/lite5200b: wakeup from low-power support |
| 5724 | |
| 5725 | U-Boot part of Lite5200b low power mode support. |
| 5726 | Puts SDRAM out of self-refresh and transfers control to |
| 5727 | address saved at physical 0x0. |
| 5728 | |
| 5729 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| 5730 | Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| 5731 | |
Wolfgang Denk | 3783782 | 2007-04-18 17:49:29 +0200 | [diff] [blame] | 5732 | commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460 |
| 5733 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 5734 | Date: Sun Apr 15 13:54:26 2007 -0400 |
| 5735 | |
| 5736 | Fix the ft_cpu_setup() property settings. |
| 5737 | |
| 5738 | Use "setter" functions instead of flags, cleaner and more flexible. |
| 5739 | It also fixes the problem noted by Timur Tabi that the ethernet MAC |
| 5740 | addresses were all being set incorrectly to the same MAC address. |
| 5741 | |
| 5742 | commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4 |
| 5743 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 5744 | Date: Sat Apr 14 22:51:24 2007 -0400 |
| 5745 | |
| 5746 | Improve the bootm command for CONFIG_OF_LIBFDT |
| 5747 | |
| 5748 | In bootm, create the "/chosen" node only if it doesn't already exist |
| 5749 | (better matches the previous behavior). |
| 5750 | Update for proper reserved memory map handling for initrd. |
| 5751 | |
| 5752 | commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888 |
| 5753 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 5754 | Date: Sat Apr 14 22:46:41 2007 -0400 |
| 5755 | |
| 5756 | Add some utilities to manipulate the reserved memory map. |
| 5757 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 5758 | commit 8048cdd56f04a756eeea4951f402bf5cc33785db |
| 5759 | Author: Wolfgang Denk <wd@denx.de> |
| 5760 | Date: Sat Apr 14 21:16:54 2007 +0200 |
| 5761 | |
| 5762 | Update CHANGELOG |
| 5763 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 5764 | commit 8e6875183cdca91c134408d119d4abcd48ef6856 |
| 5765 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5766 | Date: Sun Dec 17 18:56:46 2006 +0100 |
| 5767 | |
| 5768 | AVR32: Enable MMC support |
| 5769 | |
| 5770 | Set up the portmux for the MMC interface and enable the MMC driver |
| 5771 | along with support for DOS partitions, ext2 and FAT filesystems. |
| 5772 | |
| 5773 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5774 | |
| 5775 | commit fc26c97bb6df41b4a95662c34054fe912387bf38 |
| 5776 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5777 | Date: Fri Jan 20 10:03:53 2006 +0100 |
| 5778 | |
| 5779 | Atmel MCI driver |
| 5780 | |
| 5781 | Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. |
| 5782 | |
| 5783 | The AT91 ARM-based CPUs use basically the same hardware, so it should |
| 5784 | be possible to share this driver, but no effort has been made so far. |
| 5785 | |
| 5786 | Hardware documentation can be found in the AT32AP7000 data sheet, |
| 5787 | which can be downloaded from |
| 5788 | |
| 5789 | http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| 5790 | |
| 5791 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5792 | |
| 5793 | commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f |
| 5794 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5795 | Date: Sun Dec 17 18:55:37 2006 +0100 |
| 5796 | |
| 5797 | AVR32: Add clk and gpio infrastructure for mmci |
| 5798 | |
| 5799 | Implement functions for configuring the mmci pins, as well as |
| 5800 | functions for getting the clock rate of the mmci controller. |
| 5801 | |
| 5802 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5803 | |
| 5804 | commit 7fac3f69e9f05c5e5326681976c35d129324c4de |
| 5805 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5806 | Date: Sun Dec 17 18:53:56 2006 +0100 |
| 5807 | |
| 5808 | Enable partition support with MMC |
| 5809 | |
| 5810 | Include implementations of init_part() and get_partition_info() when |
| 5811 | CONFIG_MMC is set. |
| 5812 | |
| 5813 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5814 | |
| 5815 | commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 |
| 5816 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5817 | Date: Sun Dec 17 17:14:30 2006 +0100 |
| 5818 | |
| 5819 | AVR32: Enable networking |
| 5820 | |
| 5821 | Implement MACB initialization for AVR32 and ATSTK1000, and turn |
| 5822 | everything on, including the MACB driver. |
| 5823 | |
| 5824 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5825 | |
| 5826 | commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 |
| 5827 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5828 | Date: Fri Jan 20 10:03:34 2006 +0100 |
| 5829 | |
| 5830 | Atmel MACB ethernet driver |
| 5831 | |
| 5832 | Driver for the Atmel MACB on-chip ethernet controller. |
| 5833 | |
| 5834 | This driver has been tested on the ATSTK1000 board with a AT32AP7000 |
| 5835 | CPU. It should probably work on AT91SAM926x as well with some minor |
| 5836 | modifications. |
| 5837 | |
| 5838 | Hardware documentation can be found in the AT32AP7000 data sheet, |
| 5839 | which can be downloaded from |
| 5840 | |
| 5841 | http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| 5842 | |
| 5843 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5844 | |
| 5845 | commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 |
| 5846 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5847 | Date: Sun Dec 17 16:56:14 2006 +0100 |
| 5848 | |
| 5849 | AVR32: Add clk and gpio infrastructure for macb0 and macb1 |
| 5850 | |
| 5851 | Implement functions for configuring the macb0 and macb1 pins, as |
| 5852 | well as functions for getting the clock rate of the various |
| 5853 | busses the macb ethernet controllers are connected to. |
| 5854 | |
| 5855 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5856 | |
| 5857 | commit d5acb95b16a0a74c643524342c3437e765426d05 |
| 5858 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5859 | Date: Sun Dec 17 15:39:15 2006 +0100 |
| 5860 | |
| 5861 | AVR32: Implement simple DMA memory allocator |
| 5862 | |
| 5863 | Implement dma_alloc_coherent() which returns cache-aligned |
| 5864 | uncacheable memory. |
| 5865 | |
| 5866 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5867 | |
| 5868 | commit 91975b0fea773c9e681fea8cf3349669f27685ee |
| 5869 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5870 | Date: Sun Dec 17 15:46:02 2006 +0100 |
| 5871 | |
| 5872 | Import <linux/mii.h> from the Linux kernel |
| 5873 | |
| 5874 | Instead of creating yet another set of MII register definitions |
| 5875 | in the macb driver, here's a complete set of definitions for everyone |
| 5876 | to use. |
| 5877 | |
| 5878 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5879 | |
| 5880 | commit 1b804b229556a4d862da93c0ec94e79419364b2c |
| 5881 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5882 | Date: Wed Mar 21 19:47:36 2007 +0100 |
| 5883 | |
| 5884 | AVR32: Include more commands for ATSTK1000 |
| 5885 | |
| 5886 | Include the imi, imls and jffs commands sets by default on ATSTK1000. |
| 5887 | Also define CONFIG_BOOTARGS to something more useful, define |
| 5888 | CONFIG_BOOTCOMMAND and enable autoboot by default. |
| 5889 | |
| 5890 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5891 | |
| 5892 | commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d |
| 5893 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5894 | Date: Wed Mar 21 19:44:48 2007 +0100 |
| 5895 | |
| 5896 | AVR32: Provide a definition of struct stat |
| 5897 | |
| 5898 | Copy the definition of struct stat from the Linux kernel. |
| 5899 | |
| 5900 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5901 | |
| 5902 | commit 12f099c08167a7a51aeee623bc16dafd0841271c |
| 5903 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5904 | Date: Sun Dec 17 14:46:06 2006 +0100 |
| 5905 | |
| 5906 | AVR32: Use initdram() instead of board_init_memories() |
| 5907 | |
| 5908 | Conform to the "standard" interface and use initdram() instead of |
| 5909 | board_init_memories() on AVR32. This enables us to get rid of the |
| 5910 | sdram_size member of the global_data struct as well. |
| 5911 | |
| 5912 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5913 | |
| 5914 | commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c |
| 5915 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5916 | Date: Mon Nov 20 15:53:10 2006 +0100 |
| 5917 | |
| 5918 | AVR32: Relocate u-boot to SDRAM |
| 5919 | |
| 5920 | Relocate the u-boot image into SDRAM like everyone else does. This |
| 5921 | means that we can handle much larger .data and .bss than we used to. |
| 5922 | |
| 5923 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5924 | |
| 5925 | commit df548d3c3e2bbc40258713167859ffc2ce99a900 |
| 5926 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5927 | Date: Sun Nov 19 18:06:53 2006 +0100 |
| 5928 | |
| 5929 | AVR32: Resource management rewrite |
| 5930 | |
| 5931 | Rewrite the resource management code (i.e. I/O memory, clock gating, |
| 5932 | gpio) so it doesn't depend on any global state. This is necessary |
| 5933 | because this code is heavily used before relocation to RAM, so we |
| 5934 | can't write to any global variables. |
| 5935 | |
| 5936 | As an added bonus, this makes u-boot's memory footprint a bit smaller, |
| 5937 | although some functionality has been left out; all clocks are enabled |
| 5938 | all the time, and there's no checking for gpio line conflicts. |
| 5939 | |
| 5940 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5941 | |
| 5942 | commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 |
| 5943 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5944 | Date: Sat Nov 18 18:01:13 2006 +0100 |
| 5945 | |
| 5946 | AVR32: Clean up memory-map.h for at32ap7000 |
| 5947 | |
| 5948 | Convert spaces to tabs (must have missed this one last time around), |
| 5949 | sort the entries by address and group them together by bus |
| 5950 | connectivity. |
| 5951 | |
| 5952 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5953 | |
| 5954 | commit 28c699ef69f4b6cdf252e4747b7b590028a88981 |
| 5955 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5956 | Date: Sat Nov 18 17:32:31 2006 +0100 |
| 5957 | |
| 5958 | AVR32: Build position-independent u-boot |
| 5959 | |
| 5960 | Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot |
| 5961 | position independent. This will make relocation a lot easier. |
| 5962 | |
| 5963 | -mno-init-got means that gcc shouldn't emit code to load the GOT |
| 5964 | address into r6 in every function prologue. We do it once and for |
| 5965 | all in the early startup assembly code, so enabling this option |
| 5966 | makes u-boot a bit faster and smaller. |
| 5967 | |
| 5968 | The assembly parts have always been position-independent, so no code |
| 5969 | changes should be necessary. |
| 5970 | |
| 5971 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5972 | |
| 5973 | commit 5374b36de91d006d1df9536259fa9f66b01aa3aa |
| 5974 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5975 | Date: Sat Nov 18 17:24:31 2006 +0100 |
| 5976 | |
| 5977 | AVR32: Use avr32-linux- cross-compilation prefix by default |
| 5978 | |
| 5979 | It doesn't really matter which toolchain you use to compile u-boot, |
| 5980 | but the avr32-linux one is probably what most people have installed. |
| 5981 | |
| 5982 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5983 | |
| 5984 | commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 |
| 5985 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5986 | Date: Sat Nov 18 17:15:30 2006 +0100 |
| 5987 | |
| 5988 | AVR32: Split start_u_boot into board_init_f and board_init_r |
| 5989 | |
| 5990 | Split the avr32 initialization code into a function to run before |
| 5991 | relocation, board_init_f and a function to run after relocation, |
| 5992 | board_init_r. For now, board_init_f simply calls board_init_r |
| 5993 | at the end. |
| 5994 | |
| 5995 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 5996 | |
Wolfgang Denk | 8048cdd | 2007-04-14 21:16:54 +0200 | [diff] [blame] | 5997 | commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e |
| 5998 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 5999 | Date: Sat Apr 14 05:26:48 2007 +0200 |
| 6000 | |
| 6001 | [Fix] Set the LED status register on the UC101 for the LXT971 PHY. |
| 6002 | clear the Display after reset. |
| 6003 | |
| 6004 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 6005 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 6006 | commit 7882751c78b7ecabfd49b0eff8de27661c71f16c |
| 6007 | Author: Denis Peter <d.peter@mpl.ch> |
| 6008 | Date: Fri Apr 13 09:13:33 2007 +0200 |
| 6009 | |
| 6010 | [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c |
| 6011 | |
| 6012 | Fix bug introduced by "Fix get_partition_info() parameter error in all |
| 6013 | other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented |
| 6014 | to use diskboot or scsiboot form another device than 0. |
| 6015 | |
| 6016 | Signed-off-by: Denis Peter <d.peter@mpl.ch> |
| 6017 | |
| 6018 | commit 0b94504d22e70f537c17a0d38c87edb6e370977d |
| 6019 | Author: Greg Lopp <lopp@pobox.com> |
| 6020 | Date: Fri Apr 13 08:02:24 2007 +0200 |
| 6021 | |
| 6022 | [PATCH] Fix use of "void *" for block dev read/write buffer pointers |
| 6023 | |
| 6024 | Signed-of-by: Greg Lopp <lopp@pobox.com> |
| 6025 | Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| 6026 | |
Wolfgang Denk | a7676ea | 2007-05-16 01:16:53 +0200 | [diff] [blame] | 6027 | commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 |
| 6028 | Author: Xie Xiaobo <r63061@freescale.com> |
| 6029 | Date: Fri Mar 9 19:08:25 2007 +0800 |
| 6030 | |
| 6031 | Fix two bugs for MPC83xx DDR2 controller SPD Init |
| 6032 | |
| 6033 | There are a few bugs in the cpu/mpc83xx/spd_sdram.c |
| 6034 | the first bug is that the picos_to_clk routine introduces a huge |
| 6035 | rounding error in 83xx. |
| 6036 | the second bug is that the mode register write recovery field is |
| 6037 | tWR-1, not tWR >> 1. |
| 6038 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 6039 | commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 |
| 6040 | Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| 6041 | Date: Thu Apr 12 14:15:59 2007 +0200 |
| 6042 | |
| 6043 | ppc4xx: Fix i2c divisor calcularion for PPC4xx |
| 6044 | |
| 6045 | This patch fixes changes the i2c_init(...) function to use the function |
| 6046 | get_OPB_freq() rather than calculating the OPB speed by |
| 6047 | sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is |
| 6048 | specific per processor. The prior method was not and so was calculating |
| 6049 | the wrong speed for some PPC4xx processors. |
| 6050 | |
| 6051 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| 6052 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6053 | |
Wolfgang Denk | 8048cdd | 2007-04-14 21:16:54 +0200 | [diff] [blame] | 6054 | commit 6c9ba919375db977aaad9146bf320c7afd07ae7a |
| 6055 | Author: Wolfgang Denk <wd@denx.de> |
| 6056 | Date: Wed Apr 11 17:25:01 2007 +0200 |
| 6057 | |
| 6058 | Update CHANGELOG |
| 6059 | |
| 6060 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 6061 | |
Wolfgang Denk | 6c9ba91 | 2007-04-11 17:25:01 +0200 | [diff] [blame] | 6062 | commit 51056dd9863e6a1bc363afbbe1775c58cd967418 |
| 6063 | Author: Wolfgang Denk <wd@denx.de> |
| 6064 | Date: Wed Apr 11 17:22:55 2007 +0200 |
| 6065 | |
| 6066 | Update for SC3 board |
| 6067 | |
| 6068 | * Make IDE timeout configurable through ide_reset_timeout variable. |
| 6069 | * Use Newline as "password" string |
| 6070 | * Use just a single partition in NAND flash |
| 6071 | |
Wolfgang Denk | fd094c6 | 2007-04-18 17:20:58 +0200 | [diff] [blame] | 6072 | commit 3d98b85800c80dc68227c8f10bf5c93456d6d054 |
| 6073 | Author: Haiying Wang <haiying.wang@freescale.com> |
| 6074 | Date: Mon Jan 22 12:37:30 2007 -0600 |
| 6075 | |
| 6076 | Add PIXIS FPGA support for MPC8641HPCN board. |
| 6077 | |
| 6078 | Move the 8641HPCN's PIXIS code to the new directory |
| 6079 | board/freescale/common/ as it will be shared by |
| 6080 | future boards not in the same processor family. |
| 6081 | |
| 6082 | Write a "pixis_reset" command that utilizes the FPGA |
| 6083 | reset sequencer to support alternate soft-reset options |
| 6084 | such as using the "alternate" flash bank, enabling |
| 6085 | the watch dog, or choosing different CPU frequencies. |
| 6086 | |
| 6087 | Add documentation for the pixis_reset to README.mpc8641hpcn. |
| 6088 | |
| 6089 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 6090 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6091 | |
Wolfgang Denk | 3783782 | 2007-04-18 17:49:29 +0200 | [diff] [blame] | 6092 | commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642 |
| 6093 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6094 | Date: Fri Apr 6 14:19:43 2007 -0400 |
| 6095 | |
| 6096 | Moved fdt command support code to fdt_support.c |
| 6097 | |
| 6098 | ...in preparation for improving the bootm command's handling of fdt blobs. |
| 6099 | Also cleaned up some coding sloppiness. |
| 6100 | |
| 6101 | commit 6679f9299534e488a171a9bb8f9bb891de247aab |
| 6102 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6103 | Date: Fri Apr 6 14:17:14 2007 -0400 |
| 6104 | |
| 6105 | libfdt: Make fdt_check_header() public |
| 6106 | |
| 6107 | Changed _fdt_check_header() to fdt_check_header() and made it part of |
| 6108 | the interface - it is a useful routine. |
| 6109 | |
| 6110 | Also did some asthetics cleanup to the include files (headers). |
| 6111 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 6112 | commit c0707ce65677650b5ceab0500ee50ae5168afef2 |
| 6113 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6114 | Date: Thu Apr 5 18:34:06 2007 +0800 |
| 6115 | |
| 6116 | [Blackfin][PATCH] Kill off a bunch of common local prototypes |
| 6117 | |
| 6118 | commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d |
| 6119 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6120 | Date: Thu Apr 5 18:33:04 2007 +0800 |
| 6121 | |
| 6122 | [Blackfin][PATCH] Fix dynamic CPLB generation issue |
| 6123 | |
| 6124 | commit 0445e3a264251d75b1be45ef713c70726a2952f0 |
| 6125 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6126 | Date: Thu Apr 5 18:31:47 2007 +0800 |
| 6127 | |
| 6128 | [Blackfin][PATCH] minior cleanup |
| 6129 | |
| 6130 | commit 155fd766573981090e638b493d5857562151862e |
| 6131 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6132 | Date: Thu Apr 5 18:31:18 2007 +0800 |
| 6133 | |
| 6134 | [Blackfin][PATCH] Fix copyright and update license |
| 6135 | |
| 6136 | commit 9fd437bbd75d282f899e1da50be20a2bf38450bc |
| 6137 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6138 | Date: Thu Apr 5 18:30:25 2007 +0800 |
| 6139 | |
| 6140 | [Blackfin][PATCH] Add BF537 EMAC driver initialization |
| 6141 | |
| 6142 | commit 889256e8604e0c68db1d866d720894dffede9df6 |
| 6143 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6144 | Date: Thu Apr 5 18:29:55 2007 +0800 |
| 6145 | |
| 6146 | [Blackfin][PATCH] call real the system synchronize instruction |
| 6147 | |
| 6148 | commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 |
| 6149 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6150 | Date: Thu Apr 5 18:29:17 2007 +0800 |
| 6151 | |
| 6152 | [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it |
| 6153 | |
| 6154 | commit dfeeab2cd680df047e68e723b246adf6f33bb556 |
| 6155 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6156 | Date: Thu Apr 5 18:28:34 2007 +0800 |
| 6157 | |
| 6158 | [Blackfin][PATCH]: fix flash unaligned copy issue |
| 6159 | |
Wolfgang Denk | fd094c6 | 2007-04-18 17:20:58 +0200 | [diff] [blame] | 6160 | commit 443feb740584e406efa203af909fe2926608e8d5 |
| 6161 | Author: Igor Marnat <marny@rambler.ru> |
| 6162 | Date: Wed Mar 21 09:55:01 2007 +0300 |
| 6163 | |
| 6164 | Update usage of 'nc' in README.NetConsole |
| 6165 | |
| 6166 | Added information about usage of NetConsole on systems where the -l and -p |
| 6167 | switches are mutually exclusive. |
| 6168 | |
| 6169 | Signed-off-by: Igor Marnat <marny@rambler.ru> |
| 6170 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 6171 | |
Wolfgang Denk | 6c9ba91 | 2007-04-11 17:25:01 +0200 | [diff] [blame] | 6172 | commit 31c98a88228021b314c89ebb8104fb6473da4471 |
| 6173 | Author: Wolfgang Denk <wd@denx.de> |
| 6174 | Date: Wed Apr 4 02:09:30 2007 +0200 |
| 6175 | |
| 6176 | Minor coding style cleanup. |
| 6177 | |
Wolfgang Denk | 31c98a8 | 2007-04-04 02:09:30 +0200 | [diff] [blame] | 6178 | commit 94abd7c0583ebe01e799b25f451201deeaab550d |
| 6179 | Author: Wolfgang Denk <wd@denx.de> |
| 6180 | Date: Wed Apr 4 01:49:15 2007 +0200 |
| 6181 | |
| 6182 | Minor cleanup. |
| 6183 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 6184 | commit 822af351ad2babc7d99033361a5fcacd30f6bc78 |
| 6185 | Author: Rodolfo Giometti <giometti@enneenne.com> |
| 6186 | Date: Tue Apr 3 14:27:18 2007 +0200 |
| 6187 | |
| 6188 | Support for the Philips ISP116x HCD (Host Controller Driver) |
| 6189 | |
| 6190 | Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> |
| 6191 | |
| 6192 | commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 |
| 6193 | Author: Markus Klotzbuecher <mk@denx.de> |
| 6194 | Date: Tue Apr 3 14:27:08 2007 +0200 |
| 6195 | |
| 6196 | USB: cleanup monahans usb support. Remove dead code. |
| 6197 | |
| 6198 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| 6199 | |
Wolfgang Denk | 5f6c732 | 2007-04-18 16:17:46 +0200 | [diff] [blame] | 6200 | commit a65c5768e5537530bd1780af3d3fddc3113a163c |
| 6201 | Author: Stefan Roese <sr@denx.de> |
| 6202 | Date: Mon Apr 2 10:09:30 2007 +0200 |
| 6203 | |
| 6204 | ppc4xx: Change SysACE address on Katmai |
| 6205 | |
| 6206 | With this new base address of the Xilinx SystemACE controller |
| 6207 | the Linux driver will be easier to adapt, since it can now be |
| 6208 | mapped via the "normal" ioremap() call. |
| 6209 | |
| 6210 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6211 | |
Wolfgang Denk | 94abd7c | 2007-04-04 01:49:15 +0200 | [diff] [blame] | 6212 | commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 |
| 6213 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6214 | Date: Sat Mar 31 14:30:53 2007 -0400 |
| 6215 | |
| 6216 | Fix some minor whitespace violations. |
| 6217 | |
| 6218 | commit 213bf8c822de8eecaf69860684469cdaba2e9e6a |
| 6219 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6220 | Date: Sat Mar 31 12:23:51 2007 -0400 |
| 6221 | |
| 6222 | Add a flattened device tree (fdt) command (2 of 2) |
| 6223 | |
| 6224 | Modifications to the existing code to support the new fdt command. |
| 6225 | |
| 6226 | commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e |
| 6227 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6228 | Date: Sat Mar 31 12:22:10 2007 -0400 |
| 6229 | |
| 6230 | Add a flattened device tree (fdt) command (1 of 2) |
| 6231 | |
| 6232 | The fdt command uses David Gibson's libfdt library to manipulate as well |
| 6233 | as print the flattened device tree. This patch is the new command, |
| 6234 | the second part is the modifications to the existing code. |
| 6235 | |
| 6236 | commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e |
| 6237 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6238 | Date: Sat Mar 31 12:13:43 2007 -0400 |
| 6239 | |
| 6240 | libfdt: Enhanced and published fdt_next_tag() |
| 6241 | |
| 6242 | Enhanced the formerly private function _fdt_next_tag() to allow stepping |
| 6243 | through the tree, used to produce a human-readable dump, and made |
| 6244 | it part of the published interface. |
| 6245 | Also added some comments. |
| 6246 | |
| 6247 | commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 |
| 6248 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6249 | Date: Sat Mar 31 12:05:39 2007 -0400 |
| 6250 | |
| 6251 | libfdt: Customizations for use by u-boot. |
| 6252 | |
| 6253 | Changes to David Gibson's original source to fit into u-boot's |
| 6254 | environment. No functionality changes. |
| 6255 | |
| 6256 | commit 35748177c64a4a83a00057e93bb33e40278a2a96 |
| 6257 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6258 | Date: Sat Mar 31 12:00:56 2007 -0400 |
| 6259 | |
| 6260 | libfdt: Import libfdt source (2 of 2) |
| 6261 | |
| 6262 | This adds the applicable libfdt source files (unmodified) and a README |
| 6263 | to explain where the source came from. |
| 6264 | |
| 6265 | commit 7cd5da0fe877e7171a4cdd44880bce783132871a |
| 6266 | Author: Gerald Van Baren <vanbaren@cideas.com> |
| 6267 | Date: Sat Mar 31 11:59:59 2007 -0400 |
| 6268 | |
| 6269 | libfdt: Import libfdt source (1 of 2) |
| 6270 | |
| 6271 | This adds the applicable libfdt source files (unmodified) and a README |
| 6272 | to explain where the source came from. |
| 6273 | |
Wolfgang Denk | 6c9ba91 | 2007-04-11 17:25:01 +0200 | [diff] [blame] | 6274 | commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b |
| 6275 | Author: Stefan Roese <sr@denx.de> |
| 6276 | Date: Sat Mar 31 13:16:23 2007 +0200 |
| 6277 | |
| 6278 | ppc4xx: Update Katmai bootstrap command |
| 6279 | |
| 6280 | Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB |
| 6281 | is selected. |
| 6282 | |
| 6283 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6284 | |
| 6285 | commit cabee756a6532986729477c3cc1ea16ef8517ad2 |
| 6286 | Author: Stefan Roese <sr@denx.de> |
| 6287 | Date: Sat Mar 31 13:15:06 2007 +0200 |
| 6288 | |
| 6289 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| 6290 | |
| 6291 | Additional RAM information is now printed upon powerup, like |
| 6292 | DDR2 frequency and CAS latency. |
| 6293 | |
| 6294 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6295 | |
| 6296 | commit 60723803431ac75cad085690789e433d5ab9174e |
| 6297 | Author: Stefan Roese <sr@denx.de> |
| 6298 | Date: Sat Mar 31 08:48:36 2007 +0200 |
| 6299 | |
| 6300 | ppc4xx: Change Yucca config file to support ECC |
| 6301 | |
| 6302 | With the updated 44x DDR2 driver the Yucca board now supports |
| 6303 | ECC generation and checking. |
| 6304 | |
| 6305 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6306 | |
| 6307 | commit 490e5730c674b20d708b783a2c5ffd7208f83873 |
| 6308 | Author: Stefan Roese <sr@denx.de> |
| 6309 | Date: Sat Mar 31 08:47:34 2007 +0200 |
| 6310 | |
| 6311 | ppc4xx: Fix "bootstrap" command for Katmai board |
| 6312 | |
| 6313 | The board specific "bootstrap" command is now fixed and can |
| 6314 | be used for the AMCC Katmai board to configure different |
| 6315 | CPU/PLB/OPB frequencies. |
| 6316 | |
| 6317 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6318 | |
| 6319 | commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 |
| 6320 | Author: Stefan Roese <sr@denx.de> |
| 6321 | Date: Sat Mar 31 08:46:08 2007 +0200 |
| 6322 | |
| 6323 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| 6324 | |
| 6325 | Fix a bug in the auto calibration routine. This driver now runs |
| 6326 | more reliable with the tested modules. It's also tested with |
| 6327 | 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. |
| 6328 | |
| 6329 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6330 | |
Wolfgang Denk | 31c98a8 | 2007-04-04 02:09:30 +0200 | [diff] [blame] | 6331 | commit 342cd097be1e7affe82f42ab3da220959a699e64 |
| 6332 | Author: Michal Simek <monstr@monstr.eu> |
| 6333 | Date: Fri Mar 30 22:52:09 2007 +0200 |
| 6334 | |
| 6335 | [PATCH] Clean include dependence |
| 6336 | |
| 6337 | commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 |
| 6338 | Author: Michal Simek <monstr@monstr.eu> |
| 6339 | Date: Fri Mar 30 22:42:45 2007 +0200 |
| 6340 | |
| 6341 | [CLEAN] Remove inefficient Suzaku code |
| 6342 | |
Wolfgang Denk | 6c9ba91 | 2007-04-11 17:25:01 +0200 | [diff] [blame] | 6343 | commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d |
| 6344 | Author: Stefan Roese <sr@denx.de> |
| 6345 | Date: Wed Mar 28 15:03:16 2007 +0200 |
| 6346 | |
| 6347 | Merge some AMCC make targets to keep the top-level Makefile smaller |
| 6348 | |
| 6349 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6350 | |
| 6351 | commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e |
| 6352 | Author: Stefan Roese <sr@denx.de> |
| 6353 | Date: Wed Mar 28 14:52:12 2007 +0200 |
| 6354 | |
| 6355 | i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined |
| 6356 | |
| 6357 | The "old" i2c commands (iprobe, imd...) are now compiled in again, |
| 6358 | even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE |
| 6359 | config option. |
| 6360 | |
| 6361 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6362 | |
Wolfgang Denk | 31c98a8 | 2007-04-04 02:09:30 +0200 | [diff] [blame] | 6363 | commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a |
| 6364 | Author: Michal Simek <monstr@monstr.eu> |
| 6365 | Date: Tue Mar 27 00:32:16 2007 +0200 |
| 6366 | |
| 6367 | PATCH: Resolve GPL license problem |
| 6368 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 6369 | commit ae00bb4b2944dc64a485ed72a19754b11af7c223 |
| 6370 | Author: Rodolfo Giometti <giometti@enneenne.com> |
| 6371 | Date: Mon Mar 26 12:03:36 2007 +0200 |
| 6372 | |
| 6373 | PXA: pxa27x USB OHCI support |
| 6374 | |
| 6375 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| 6376 | |
| 6377 | commit ae79f60677c208326535647dcbd5c3ec40dbcb0b |
| 6378 | Author: Markus Klotzbuecher <mk@denx.de> |
| 6379 | Date: Mon Mar 26 11:21:05 2007 +0200 |
| 6380 | |
| 6381 | USB: remove the S3C24X0_merge #define, which was introduced while |
| 6382 | merging OHCI drivers. |
| 6383 | |
| 6384 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| 6385 | |
Wolfgang Denk | 31c98a8 | 2007-04-04 02:09:30 +0200 | [diff] [blame] | 6386 | commit 1798049522f594013aea29457d46794298c6ae15 |
| 6387 | Author: Michal Simek <root@monstr.eu> |
| 6388 | Date: Mon Mar 26 01:39:07 2007 +0200 |
| 6389 | |
| 6390 | Support for XUPV2P board |
| 6391 | Reset support |
| 6392 | BSP autoconfig support |
| 6393 | |
Wolfgang Denk | 6c9ba91 | 2007-04-11 17:25:01 +0200 | [diff] [blame] | 6394 | commit 0d974d5297349504a2ddfa09314be573b5df320a |
| 6395 | Author: Stefan Roese <sr@denx.de> |
| 6396 | Date: Sat Mar 24 15:57:09 2007 +0100 |
| 6397 | |
| 6398 | [PATCH] Add 4xx GPIO functions |
| 6399 | |
| 6400 | This patch adds some 4xx GPIO functions. It also moves some of the |
| 6401 | common code and defines into a common 4xx GPIO header file. |
| 6402 | |
| 6403 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6404 | |
| 6405 | commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 |
| 6406 | Author: Stefan Roese <sr@denx.de> |
| 6407 | Date: Sat Mar 24 15:55:58 2007 +0100 |
| 6408 | |
| 6409 | [PATCH] Small Sequoia cleanup |
| 6410 | |
| 6411 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6412 | |
| 6413 | commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf |
| 6414 | Author: Stefan Roese <sr@denx.de> |
| 6415 | Date: Sat Mar 24 15:45:34 2007 +0100 |
| 6416 | |
| 6417 | [PATCH] Clean up 40EZ/Acadia support |
| 6418 | |
| 6419 | This patch cleans up all the open issue of the preliminary |
| 6420 | Acadia support. |
| 6421 | |
| 6422 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6423 | |
Wolfgang Denk | 94abd7c | 2007-04-04 01:49:15 +0200 | [diff] [blame] | 6424 | commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 |
| 6425 | Author: Jon Loeliger <jdl@freescale.com> |
| 6426 | Date: Tue Dec 12 11:02:20 2006 -0600 |
| 6427 | |
| 6428 | Fix 8641HPCN problem with ld version 2.16 |
| 6429 | |
| 6430 | (Dot outside sections problem). |
| 6431 | |
| 6432 | This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. |
| 6433 | |
| 6434 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6435 | |
| 6436 | commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c |
| 6437 | Author: Haiying Wang <haiying.wang@freescale.com> |
| 6438 | Date: Thu Dec 7 10:35:55 2006 -0600 |
| 6439 | |
| 6440 | Set Rev 2.x 86xx PIC in mixed mode. |
| 6441 | |
| 6442 | Prevent false interrupt from hanging Linux as MSR[EE] is set |
| 6443 | to enable interrupts by changing the PIC out of the default |
| 6444 | pass through mode into mixed mode. |
| 6445 | |
| 6446 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 6447 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6448 | |
| 6449 | commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e |
| 6450 | Author: Jason Jin <jason.jin@freescale.com> |
| 6451 | Date: Thu Dec 7 10:32:35 2006 -0600 |
| 6452 | |
| 6453 | Add flash cmd function to 8641HPCN ramboot |
| 6454 | |
| 6455 | Also fixes some commmand for 8641 HPCN ramboot case. |
| 6456 | |
| 6457 | Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| 6458 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6459 | |
| 6460 | commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 |
| 6461 | Author: Ed Swarthout <ed.swarthout@freescale.com> |
| 6462 | Date: Thu Dec 7 10:34:14 2006 -0600 |
| 6463 | |
| 6464 | Add support for 8641 Rev 2 silicon. |
| 6465 | |
| 6466 | Without this patch, I am unable to get to the prompt on rev 2 silicon. |
| 6467 | Only set ddrioovcr for rev1. |
| 6468 | |
| 6469 | Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> |
| 6470 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6471 | |
| 6472 | commit 44ba464b99001f8bd1c456a1e9d59726252f707a |
| 6473 | Author: Wolfgang Denk <wd@denx.de> |
| 6474 | Date: Thu Mar 22 00:13:12 2007 +0100 |
| 6475 | |
| 6476 | Code cleanup / re-insert previous Copyright entries. |
| 6477 | |
| 6478 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 6479 | |
Wolfgang Denk | 44ba464 | 2007-03-22 00:13:12 +0100 | [diff] [blame] | 6480 | commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 |
| 6481 | Author: Wolfgang Denk <wd@denx.de> |
| 6482 | Date: Wed Mar 21 23:26:15 2007 +0100 |
| 6483 | |
| 6484 | Code cleanup. Update CHANGELOG |
| 6485 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 6486 | commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 |
| 6487 | Author: Stefan Roese <sr@denx.de> |
| 6488 | Date: Wed Mar 21 14:54:29 2007 +0100 |
| 6489 | |
| 6490 | ppc4xx: Fix file mode of include/configs/acadia.h |
| 6491 | |
| 6492 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6493 | |
| 6494 | commit d5f4614c9350d9333e575100fb250aab774d0258 |
| 6495 | Author: Markus Klotzbuecher <mk@denx.de> |
| 6496 | Date: Wed Mar 21 14:41:46 2007 +0100 |
| 6497 | |
| 6498 | SPC1920: fix small clock routing bug |
| 6499 | |
| 6500 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| 6501 | |
| 6502 | commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 |
| 6503 | Author: Stefan Roese <sr@denx.de> |
| 6504 | Date: Wed Mar 21 13:39:57 2007 +0100 |
| 6505 | |
| 6506 | [PATCH] Add AMCC Acadia (405EZ) eval board support |
| 6507 | |
| 6508 | This patch adds support for the new AMCC Acadia eval board. |
| 6509 | |
| 6510 | Please note that this Acadia/405EZ support is still in a beta stage. |
| 6511 | Still lot's of cleanup needed but we need a preliminary release now. |
| 6512 | |
| 6513 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6514 | |
| 6515 | commit e01bd218b00af73499331a1a701625a852cd286f |
| 6516 | Author: Stefan Roese <sr@denx.de> |
| 6517 | Date: Wed Mar 21 13:38:59 2007 +0100 |
| 6518 | |
| 6519 | [PATCH] Add AMCC PPC405EZ support |
| 6520 | |
| 6521 | This patch adds support for the new AMCC 405EZ PPC. It is in |
| 6522 | preparation for the AMCC Acadia board support. |
| 6523 | |
| 6524 | Please note that this Acadia/405EZ support is still in a beta stage. |
| 6525 | Still lot's of cleanup needed but we need a preliminary release now. |
| 6526 | |
| 6527 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6528 | |
| 6529 | commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 |
| 6530 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 6531 | Date: Wed Mar 21 08:45:17 2007 +0100 |
| 6532 | |
| 6533 | [PATCH] TQM8272: dont change the bits given from the HRCW |
| 6534 | for the SIUMCR and BCR Register. |
| 6535 | Fix the calculation for the EEprom Size |
| 6536 | |
| 6537 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 6538 | |
Wolfgang Denk | 44ba464 | 2007-03-22 00:13:12 +0100 | [diff] [blame] | 6539 | commit 654589873dbafcf104dff133ce0d03a4506e9cc3 |
| 6540 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6541 | Date: Tue Mar 20 18:16:24 2007 +0800 |
| 6542 | |
| 6543 | [Blackfin][PATCH] Add BF561 EZKIT board support |
| 6544 | |
| 6545 | commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 |
| 6546 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6547 | Date: Mon Mar 19 22:55:58 2007 +0800 |
| 6548 | |
| 6549 | [Blackfin][PATCH] minor cleanup |
| 6550 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 6551 | commit 389b6bb50f745bf5038ce030300d8a8512e96f79 |
| 6552 | Author: Wolfgang Denk <wd@denx.de> |
| 6553 | Date: Mon Mar 19 13:10:08 2007 +0100 |
| 6554 | |
| 6555 | Remove obsoleted POST files. |
| 6556 | |
| 6557 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 6558 | |
Wolfgang Denk | 44ba464 | 2007-03-22 00:13:12 +0100 | [diff] [blame] | 6559 | commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 |
| 6560 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6561 | Date: Mon Mar 19 01:26:11 2007 +0800 |
| 6562 | |
| 6563 | [PATCH] Add flash chip M29W320ET/B support |
| 6564 | |
| 6565 | commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 |
| 6566 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6567 | Date: Mon Mar 19 01:24:52 2007 +0800 |
| 6568 | |
| 6569 | [Blackfin][PATCH] Add BF537 stamp board support |
| 6570 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 6571 | commit 8423e5e31a7235d05a482627315fb11d49c17bd7 |
| 6572 | Author: Stefan Roese <sr@denx.de> |
| 6573 | Date: Fri Mar 16 21:11:42 2007 +0100 |
| 6574 | |
| 6575 | [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board |
| 6576 | |
| 6577 | Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| 6578 | DDR memory are dynamically programmed matching the total size |
| 6579 | of the equipped memory (DIMM modules). |
| 6580 | |
| 6581 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6582 | |
| 6583 | commit 76d1466f918b881cda2d259254761e73885093c2 |
| 6584 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6585 | Date: Tue Mar 13 13:38:05 2007 +0100 |
| 6586 | |
| 6587 | [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 |
| 6588 | boards in terms of unification. |
| 6589 | |
| 6590 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6591 | |
| 6592 | commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 |
| 6593 | Author: Wolfgang Denk <wd@denx.de> |
| 6594 | Date: Tue Mar 13 16:05:55 2007 +0100 |
| 6595 | |
| 6596 | Make SC3 board build with 'make O='; use 'addcons' consistently |
| 6597 | (SC3 and Jupiter used to use 'addcon' instead). |
| 6598 | |
| 6599 | Signed-off-by: Wolfgang Denk wd@denx.de |
| 6600 | |
| 6601 | commit 8502e30a28e492c756ea2d7df0ace026388fce4b |
| 6602 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 6603 | Date: Tue Mar 13 09:40:59 2007 +0100 |
| 6604 | |
| 6605 | [PATCH] update board config for jupiter Board: |
| 6606 | added Hush Shell, |
| 6607 | CONFIG_CMDLINE_EDITING, |
| 6608 | CFG_ENV_ADDR_REDUND activated |
| 6609 | |
| 6610 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 6611 | |
Wolfgang Denk | 44ba464 | 2007-03-22 00:13:12 +0100 | [diff] [blame] | 6612 | commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 |
| 6613 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6614 | Date: Mon Mar 12 12:11:55 2007 +0800 |
| 6615 | |
| 6616 | [Blackfin][PATCH] minor cleanup |
| 6617 | |
| 6618 | commit bfa5754a58477ac917d21527cd0f079d87cf188e |
| 6619 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6620 | Date: Mon Mar 12 01:42:06 2007 +0800 |
| 6621 | |
| 6622 | [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue |
| 6623 | |
| 6624 | commit 8440bb14581a294375c34b91b42512f9753d1130 |
| 6625 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6626 | Date: Mon Mar 12 00:25:14 2007 +0800 |
| 6627 | |
| 6628 | [Blackfin][PATCH] code cleanup |
| 6629 | |
Wolfgang Denk | 31c98a8 | 2007-04-04 02:09:30 +0200 | [diff] [blame] | 6630 | commit cfc67116a706fd18b8f6a9c11a16753c5626d689 |
| 6631 | Author: Michal Simek <monstr@monstr.eu> |
| 6632 | Date: Sun Mar 11 13:48:24 2007 +0100 |
| 6633 | |
| 6634 | [Microblaze][PATCH] part 2 |
| 6635 | timer support |
| 6636 | interrupt controller support |
| 6637 | flash support |
| 6638 | ethernet support |
| 6639 | cache support |
| 6640 | board information support |
| 6641 | env support |
| 6642 | booting image support |
| 6643 | |
| 6644 | adding support for Xilinx ML401 |
| 6645 | |
| 6646 | commit 76316a318de91f6184e7c22a10e02d275ade2441 |
| 6647 | Author: Michal Simek <monstr@monstr.eu> |
| 6648 | Date: Sun Mar 11 13:42:58 2007 +0100 |
| 6649 | |
| 6650 | [Microblaze][PATCH] |
| 6651 | timer support |
| 6652 | interrupt controller support |
| 6653 | flash support |
| 6654 | ethernet support |
| 6655 | cache support |
| 6656 | board information support |
| 6657 | env support |
| 6658 | booting image support |
| 6659 | |
| 6660 | adding support for Xilinx ML401 |
| 6661 | |
Wolfgang Denk | 44ba464 | 2007-03-22 00:13:12 +0100 | [diff] [blame] | 6662 | commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 |
| 6663 | Author: Aubrey Li <aubrey.adi@gmail.com> |
| 6664 | Date: Sat Mar 10 23:49:29 2007 +0800 |
| 6665 | |
| 6666 | [Blackfin][PATCH] code cleanup |
| 6667 | |
| 6668 | commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 |
| 6669 | Author: Aubrey.Li <aubrey.adi@gmail.com> |
| 6670 | Date: Fri Mar 9 13:40:56 2007 +0800 |
| 6671 | |
| 6672 | [Blackfin][PATCH-2/2] Common files changed to support bf533 platform |
| 6673 | |
| 6674 | commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f |
| 6675 | Author: Aubrey.Li <aubrey.adi@gmail.com> |
| 6676 | Date: Fri Mar 9 13:38:44 2007 +0800 |
| 6677 | |
| 6678 | [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support |
| 6679 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 6680 | commit 992423ab43c2bcf6b704853bd00af77450915e20 |
| 6681 | Author: Stefan Roese <sr@denx.de> |
| 6682 | Date: Thu Mar 8 23:00:08 2007 +0100 |
| 6683 | |
| 6684 | ppc4xx: Fix file mode of sequoia.c |
| 6685 | |
| 6686 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6687 | |
| 6688 | commit eb92f613556800f7483666db09d9a237ad911d4a |
| 6689 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6690 | Date: Thu Mar 8 22:52:51 2007 +0100 |
| 6691 | |
| 6692 | Minor cleanup. |
| 6693 | |
| 6694 | commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 |
| 6695 | Author: John Otken john@softadvances.com <john@softadvances.com> |
| 6696 | Date: Thu Mar 8 09:39:48 2007 -0600 |
| 6697 | |
| 6698 | ppc4xx: Clear Sequoia/Rainier security engine reset bits |
| 6699 | |
| 6700 | Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> |
| 6701 | |
| 6702 | commit 650a330dd2539130c8c324791e2f9f75aed79d4e |
| 6703 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6704 | Date: Thu Mar 8 16:26:52 2007 +0100 |
| 6705 | |
| 6706 | [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules |
| 6707 | |
| 6708 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6709 | |
| 6710 | commit d9fc703246840c4b268debf48c334ba55c597dc0 |
| 6711 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6712 | Date: Thu Mar 8 16:25:47 2007 +0100 |
| 6713 | |
| 6714 | [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined |
| 6715 | |
| 6716 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6717 | |
| 6718 | commit ced5b9029043397348cdc88e0cfcd6b1f629250b |
| 6719 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6720 | Date: Thu Mar 8 16:23:11 2007 +0100 |
| 6721 | |
| 6722 | [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS |
| 6723 | |
| 6724 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6725 | |
| 6726 | commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 |
| 6727 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6728 | Date: Thu Mar 8 16:20:32 2007 +0100 |
| 6729 | |
| 6730 | [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM |
| 6731 | |
| 6732 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6733 | |
| 6734 | commit f9fc6a5852a6335840882fa2111925010eea1abe |
| 6735 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6736 | Date: Wed Mar 7 15:32:01 2007 +0100 |
| 6737 | |
| 6738 | fixed ethernet phy configuration for plu405 board |
| 6739 | |
| 6740 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| 6741 | |
| 6742 | commit 769104c9356594deb2092e204a39c05b33202d6c |
| 6743 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6744 | Date: Thu Mar 8 21:49:27 2007 +0100 |
| 6745 | |
| 6746 | Minor cleanup |
| 6747 | |
Wolfgang Denk | 769104c | 2007-03-08 21:49:27 +0100 | [diff] [blame] | 6748 | commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa |
| 6749 | Author: Stefan Roese <sr@denx.de> |
| 6750 | Date: Thu Mar 8 10:13:16 2007 +0100 |
| 6751 | |
| 6752 | [PATCH] Update AMCC Luan 440SP eval board support |
| 6753 | |
| 6754 | The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR |
| 6755 | inititializition. This includes DDR auto calibration and support |
| 6756 | for different DIMM modules, instead of the fixed setup used in |
| 6757 | the earlier version. |
| 6758 | |
| 6759 | This patch also enables the cache in FLASH for the startup |
| 6760 | phase of U-Boot (while running from FLASH). After relocating to |
| 6761 | SDRAM the cache is disabled again. This will speed up the boot |
| 6762 | process, especially the SDRAM setup, since there are some loops |
| 6763 | for memory testing (auto calibration). |
| 6764 | |
| 6765 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6766 | |
| 6767 | commit 2f5df47351910a2936c7741cf111855829200943 |
| 6768 | Author: Stefan Roese <sr@denx.de> |
| 6769 | Date: Thu Mar 8 10:10:18 2007 +0100 |
| 6770 | |
| 6771 | [PATCH] Update AMCC Yucca 440SPe eval board support |
| 6772 | |
| 6773 | The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR |
| 6774 | inititializition. This includes DDR auto calibration and support |
| 6775 | for different DIMM modules, instead of the fixed setup used in |
| 6776 | the earlier version. |
| 6777 | |
| 6778 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6779 | |
| 6780 | commit 2721a68a9ea91f1e494649ce68b2577261f578e2 |
| 6781 | Author: Stefan Roese <sr@denx.de> |
| 6782 | Date: Thu Mar 8 10:07:18 2007 +0100 |
| 6783 | |
| 6784 | ppc4xx: Small AMCC Katmai 440SPe update |
| 6785 | |
| 6786 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6787 | |
| 6788 | commit df294497479b1dca6dd86318b2a912f72fede0df |
| 6789 | Author: Stefan Roese <sr@denx.de> |
| 6790 | Date: Thu Mar 8 10:06:09 2007 +0100 |
| 6791 | |
| 6792 | ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP |
| 6793 | |
| 6794 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6795 | |
Wolfgang Denk | fd094c6 | 2007-04-18 17:20:58 +0200 | [diff] [blame] | 6796 | commit 83853178bd36bca6f0f8f1331476620c84a587fc |
| 6797 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 6798 | Date: Wed Mar 7 12:14:50 2007 -0600 |
| 6799 | |
| 6800 | net - Support ping reply when processing net-loop |
| 6801 | |
| 6802 | Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. |
| 6803 | |
| 6804 | This permits the ping command to test the phy interface when the phy |
| 6805 | is put in loopback mode (typically by setting register 0 bit 14). |
| 6806 | |
| 6807 | It also allows the port to respond to an external ping when u-boot is |
| 6808 | processing some other net command (such as tftp). This is useful when |
| 6809 | tftp appears to hang. |
| 6810 | |
| 6811 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| 6812 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 6813 | |
Wolfgang Denk | 769104c | 2007-03-08 21:49:27 +0100 | [diff] [blame] | 6814 | commit fa1aef15bcd47736687be1af544506e90fba545d |
| 6815 | Author: Stefan Roese <sr@denx.de> |
| 6816 | Date: Wed Mar 7 16:43:00 2007 +0100 |
| 6817 | |
| 6818 | [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board |
| 6819 | |
| 6820 | Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| 6821 | DDR memory are dynamically programmed matching the total size |
| 6822 | of the equipped memory (DIMM modules). |
| 6823 | |
| 6824 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6825 | |
| 6826 | commit e2ebe696818939e2b974628be9c921ea3fe9de13 |
| 6827 | Author: Stefan Roese <sr@denx.de> |
| 6828 | Date: Wed Mar 7 16:39:36 2007 +0100 |
| 6829 | |
| 6830 | [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's |
| 6831 | |
| 6832 | This patch fixes a problem that occurs when 2 DIMM's are |
| 6833 | used. This problem was first spotted and fixed by Gerald Jackson |
| 6834 | <gerald.jackson@reaonixsecurity.com> but this patch fixes the |
| 6835 | problem in a little more clever way. |
| 6836 | |
| 6837 | This patch also adds the nice functionality to dynamically |
| 6838 | create the TLB entries for the SDRAM (tlb.c). So we should |
| 6839 | never run into such problems with wrong (too short) TLB |
| 6840 | initialization again on these platforms. |
| 6841 | |
| 6842 | As this feature is new to the "old" 44x SPD DDR driver, it |
| 6843 | has to be enabled via the CONFIG_PROG_SDRAM_TLB define. |
| 6844 | |
| 6845 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6846 | |
| 6847 | commit 39218433983417b9df087976a79e3f80dd5e83d6 |
| 6848 | Author: Wolfgang Denk <wd@denx.de> |
| 6849 | Date: Wed Mar 7 16:33:44 2007 +0100 |
| 6850 | |
| 6851 | UC101: fix compiler warnings |
| 6852 | |
| 6853 | commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce |
| 6854 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6855 | Date: Wed Mar 7 16:19:46 2007 +0100 |
| 6856 | |
| 6857 | HMI1001: fix build error, cleanup compiler warnings. |
| 6858 | |
| 6859 | commit ad5bb451ade552c44bef9119d907929ebc2c126f |
| 6860 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6861 | Date: Tue Mar 6 18:08:43 2007 +0100 |
| 6862 | |
| 6863 | Restructure POST directory to support of other CPUs, boards, etc. |
| 6864 | |
| 6865 | commit a5284efd125967675b2e9c6ef7b95832268ad360 |
| 6866 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6867 | Date: Tue Mar 6 18:01:47 2007 +0100 |
| 6868 | |
| 6869 | Fix HOSTARCH handling. |
| 6870 | Patch by Mike Frysinger, Mar 05 2007 |
| 6871 | |
| 6872 | commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 |
| 6873 | Author: Stefan Roese <sr@denx.de> |
| 6874 | Date: Tue Mar 6 07:47:04 2007 +0100 |
| 6875 | |
| 6876 | [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup |
| 6877 | |
| 6878 | As provided by the AMCC applications team, this patch optimizes the |
| 6879 | DDR2 setup for 166MHz bus speed. The values provided are also save |
| 6880 | to use on a "normal" 133MHz PLB bus system. Only the refresh counter |
| 6881 | setup has to be adjusted as done in this patch. |
| 6882 | |
| 6883 | For this the NAND booting version had to include the "speed.c" file |
| 6884 | from the cpu/ppc4xx directory. With this addition the NAND SPL image |
| 6885 | will just fit into the 4kbytes of program space. gcc version 4.x as |
| 6886 | provided with ELDK 4.x is needed to generate this optimized code. |
| 6887 | |
| 6888 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 6889 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 6890 | commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 |
| 6891 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 6892 | Date: Sun Mar 4 01:36:05 2007 +0100 |
| 6893 | |
| 6894 | Some code cleanup. |
| 6895 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 6896 | commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 |
| 6897 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 6898 | Date: Wed Feb 28 00:02:04 2007 -0600 |
| 6899 | |
| 6900 | mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings |
| 6901 | |
| 6902 | (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) |
| 6903 | |
| 6904 | commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf |
| 6905 | Author: Kumar Gala <galak@kernel.crashing.org> |
| 6906 | Date: Tue Feb 27 23:51:42 2007 -0600 |
| 6907 | |
| 6908 | mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode |
| 6909 | |
| 6910 | The config value for: |
| 6911 | * CFG_ACR_PIPE_DEP |
| 6912 | * CFG_ACR_RPTCNT |
| 6913 | * CFG_SPCR_TSEC1EP |
| 6914 | * CFG_SPCR_TSEC2EP |
| 6915 | * CFG_SCCR_TSEC1CM |
| 6916 | * CFG_SCCR_TSEC2CM |
| 6917 | |
| 6918 | Were not being used when setting the appropriate register |
| 6919 | |
| 6920 | Added: |
| 6921 | * CFG_SCCR_USBMPHCM |
| 6922 | * CFG_SCCR_USBDRCM |
| 6923 | * CFG_SCCR_PCICM |
| 6924 | * CFG_SCCR_ENCCM |
| 6925 | |
| 6926 | To allow full config of the SCCR. |
| 6927 | |
| 6928 | Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 |
| 6929 | that were just bogus. |
| 6930 | |
| 6931 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 6932 | |
| 6933 | commit d51b3cf371cd441030460ef19d36b2924c361b1a |
| 6934 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 6935 | Date: Thu Feb 22 20:06:57 2007 -0600 |
| 6936 | |
| 6937 | mpc83xx: update [local-]mac-address properties on UEC based devices |
| 6938 | |
| 6939 | 8360 and 832x weren't updating their [local-]mac-address |
| 6940 | properties. This patch fixes that. |
| 6941 | |
| 6942 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 6943 | |
| 6944 | commit 61f4f912acbe60776c5e00df1ec94094ce672957 |
| 6945 | Author: Timur Tabi <timur@freescale.com> |
| 6946 | Date: Tue Feb 13 10:41:42 2007 -0600 |
| 6947 | |
| 6948 | mpc83xx: write MAC address to mac-address and local-mac-address |
| 6949 | |
| 6950 | Some device trees have a mac-address property, some have local-mac-address, |
| 6951 | and some have both. To support all of these device trees, this patch |
| 6952 | updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. |
| 6953 | This function already updates local-mac-address. |
| 6954 | |
| 6955 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 6956 | |
| 6957 | commit 22d71a71f57fd5d38b27ac3848e50d790360a598 |
| 6958 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 6959 | Date: Tue Feb 27 18:41:08 2007 -0600 |
| 6960 | |
| 6961 | mpc83xx: add command line editing by default |
| 6962 | |
| 6963 | commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca |
| 6964 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 6965 | Date: Wed Feb 14 19:50:53 2007 -0600 |
| 6966 | |
| 6967 | mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers |
| 6968 | |
| 6969 | Disable G1TXCLK, G2TXCLK h/w buffers. This patch |
| 6970 | fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. |
| 6971 | |
| 6972 | Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. |
| 6973 | |
| 6974 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| 6975 | Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> |
| 6976 | |
| 6977 | commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f |
| 6978 | Author: Xie Xiaobo <r63061@freescale.com> |
| 6979 | Date: Wed Feb 14 18:27:17 2007 +0800 |
| 6980 | |
| 6981 | mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx |
| 6982 | |
| 6983 | The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. |
| 6984 | it pass DDR/DDR2 compliance tests. |
| 6985 | |
| 6986 | Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| 6987 | |
| 6988 | commit b110f40bd180c6b560276589beedf753e97c46ce |
| 6989 | Author: Xie Xiaobo <r63061@freescale.com> |
| 6990 | Date: Wed Feb 14 18:27:06 2007 +0800 |
| 6991 | |
| 6992 | mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS |
| 6993 | |
| 6994 | MPC8360E rev2.0 have new spridr,and PVR value, |
| 6995 | The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. |
| 6996 | |
| 6997 | Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| 6998 | |
| 6999 | commit 8d172c0f0d85998a256a95b7459a5403a30380ed |
| 7000 | Author: Xie Xiaobo <r63061@freescale.com> |
| 7001 | Date: Wed Feb 14 18:26:44 2007 +0800 |
| 7002 | |
| 7003 | mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS |
| 7004 | |
| 7005 | MPC8349E rev3.1 have new spridr,and PVR value, |
| 7006 | The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. |
| 7007 | |
| 7008 | Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> |
| 7009 | |
| 7010 | commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b |
| 7011 | Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| 7012 | Date: Wed Jan 31 11:04:19 2007 +0100 |
| 7013 | |
| 7014 | mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c |
| 7015 | |
| 7016 | Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) |
| 7017 | which is used to se if an slave will ACK after receiving its address. |
| 7018 | |
| 7019 | Correct i2c probing to use this method as the old method could upset |
| 7020 | a slave as it wrote a data byte to it. |
| 7021 | |
| 7022 | Add a small delay in i2c_init() to let the controller |
| 7023 | shutdown any ongoing I2C activity. |
| 7024 | |
| 7025 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| 7026 | |
| 7027 | commit 7a78f148d6a7298e4fface680dc7eacd877b1aba |
| 7028 | Author: Timur Tabi <timur@freescale.com> |
| 7029 | Date: Wed Jan 31 15:54:29 2007 -0600 |
| 7030 | |
| 7031 | mpc83xx: Add support for the MPC8349E-mITX-GP |
| 7032 | |
| 7033 | Add support for the MPC8349E-mITX-GP, a stripped-down version of the |
| 7034 | MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in |
| 7035 | HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. |
| 7036 | |
| 7037 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 7038 | |
| 7039 | commit fab16807adad350f618024350c6950165c247c72 |
| 7040 | Author: Timur Tabi <timur@freescale.com> |
| 7041 | Date: Wed Jan 31 15:54:20 2007 -0600 |
| 7042 | |
| 7043 | mpc83xx: Delete sdram_init() for MPC8349E-mITX |
| 7044 | |
| 7045 | There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() |
| 7046 | never does anything. This patch deletes it. |
| 7047 | |
| 7048 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 7049 | |
| 7050 | commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 |
| 7051 | Author: Dave Liu <daveliu@freescale.com> |
| 7052 | Date: Fri Jan 19 10:43:26 2007 +0800 |
| 7053 | |
| 7054 | mpc83xx: Fix the LAW1/3 bug |
| 7055 | |
| 7056 | The patch solves the alignment problem of the local bus access windows to |
| 7057 | render accessible the memory bank and PHY registers of UPC 1 (starting at |
| 7058 | 0xf801 0000). What we actually did was to adjust the sizes of the bus |
| 7059 | access windows so that the base address alignment requirement would be met. |
| 7060 | |
| 7061 | Signed-off-by: Chereji Marian <marian.chereji@freescale.com> |
| 7062 | Signed-off-by: Gridish Shlomi <gridish@freescale.com> |
| 7063 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 7064 | |
| 7065 | commit 97c4b397dce236a7318b304667bf89e59d08b17c |
| 7066 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 7067 | Date: Tue Jan 30 16:15:31 2007 -0600 |
| 7068 | |
| 7069 | mpc83xx: don't hang if watchdog configured on 8360, 832x |
| 7070 | |
| 7071 | don't hang if watchdog configured on 8360, 832x |
| 7072 | |
| 7073 | The watchdog programming model is the same across all 83xx devices; |
| 7074 | make the code reflect that. |
| 7075 | |
| 7076 | commit b70047478570e371ce7223be342ce98afea0f7d6 |
| 7077 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 7078 | Date: Tue Jan 30 16:15:21 2007 -0600 |
| 7079 | |
| 7080 | mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt |
| 7081 | |
| 7082 | protect memcpy to bad address if a local-mac-address is missing from dt |
| 7083 | |
| 7084 | commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 |
| 7085 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 7086 | Date: Tue Jan 30 16:15:04 2007 -0600 |
| 7087 | |
| 7088 | mpc83xx: make 8360 default environment fdt be 8360 (not 8349) |
| 7089 | |
| 7090 | make 8360 default environment fdt be 8360 (not 8349) |
| 7091 | |
| 7092 | commit a28899c910024a0226331df07207b1038c300c93 |
| 7093 | Author: Emilian Medve <Emilian.Medve@freescale.com> |
| 7094 | Date: Tue Jan 30 16:14:50 2007 -0600 |
| 7095 | |
| 7096 | mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC |
| 7097 | |
| 7098 | The problem is not gcc4 but the code itself. The BD_STATUS() macro can't |
| 7099 | be used for busy-waiting since it strips the 'volatile' property from |
| 7100 | the bd variable. gcc3 was working by pure luck. |
| 7101 | |
| 7102 | This is a follow on patch to "Fix the UEC driver bug of QE" |
| 7103 | |
| 7104 | commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 |
| 7105 | Author: Kumar Gala <galak@kernel.crashing.org> |
| 7106 | Date: Tue Jan 30 14:08:30 2007 -0600 |
| 7107 | |
| 7108 | mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead |
| 7109 | |
| 7110 | The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all |
| 7111 | MPC834X class processors. Change the protections from CONFIG_MPC8349 to |
| 7112 | CONFIG_MPC834X so they are more generic. |
| 7113 | |
| 7114 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 7115 | |
| 7116 | commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 |
| 7117 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 7118 | Date: Thu Jan 25 13:40:55 2007 -0600 |
| 7119 | |
| 7120 | mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL |
| 7121 | |
| 7122 | commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb |
| 7123 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 7124 | Date: Wed Jan 24 17:18:37 2007 -0600 |
| 7125 | |
| 7126 | mpc83xx: sort Makefile targets |
| 7127 | |
| 7128 | reordered targets alphabetically |
| 7129 | |
| 7130 | commit 91e25769771c1164ed63ffca0add49f934ae3343 |
| 7131 | Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| 7132 | Date: Tue Jan 16 11:38:14 2007 -0500 |
| 7133 | |
| 7134 | mpc83xx: U-Boot support for Wind River SBC8349 |
| 7135 | |
| 7136 | I've redone the SBC8349 support to match git-current, which |
| 7137 | incorporates all the MPC834x updates from Freescale since the 1.1.6 |
| 7138 | release, including the DDR changes. |
| 7139 | |
| 7140 | I've kept all the SBC8349 files as parallel as possible to the |
| 7141 | MPC8349EMDS ones for ease of maintenance and to allow for easy |
| 7142 | inspection of what was changed to support this board. Hence the SBC8349 |
| 7143 | U-Boot has FDT support and everything else that the MPC8349EMDS has. |
| 7144 | |
| 7145 | Fortunately the Freescale updates added support for boards using CS0, |
| 7146 | but I had to change spd_sdram.c to allow for board specific settings for |
| 7147 | the sdram_clk_cntl (it is/was hard coded to zero, and that remains the |
| 7148 | default if the board doesn't specify a value.) |
| 7149 | |
| 7150 | Hopefully this should be mergeable as-is and require no whitespace |
| 7151 | cleanups or similar, but if something doesn't measure up then let me |
| 7152 | know and I'll fix it. |
| 7153 | |
| 7154 | Thanks, |
| 7155 | Paul. |
| 7156 | |
| 7157 | commit 05031db456ab227f3e3752f37b9b812b65bb83ad |
| 7158 | Author: Sam Song <samsongshu@yahoo.com.cn> |
| 7159 | Date: Thu Dec 14 19:03:21 2006 +0800 |
| 7160 | |
| 7161 | mpc83xx: Remove a redundant semicolon in mpc8349itx.c |
| 7162 | |
| 7163 | A redundant semicolon existed in mpc8349itx.c |
| 7164 | should be removed. |
| 7165 | |
| 7166 | Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> |
| 7167 | |
| 7168 | commit f35f358241c549be3f75cfe2eaa642914275b7ba |
| 7169 | Author: Jerry Van Baren <gerald.vanbaren@comcast.net> |
| 7170 | Date: Wed Dec 6 21:23:55 2006 -0500 |
| 7171 | |
| 7172 | mpc83xx: Put the version (and magic) after the HRCW. |
| 7173 | |
| 7174 | Put the version (and magic) after the HRCW. This puts it in a fixed |
| 7175 | location in flash, not at the start of flash but as close as we can get. |
| 7176 | |
| 7177 | Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> |
| 7178 | |
| 7179 | commit 48aecd969171a6e99a55fae04933857787f9a5bd |
| 7180 | Author: Dave Liu <r63238@freescale.com> |
| 7181 | Date: Thu Dec 7 21:14:51 2006 +0800 |
| 7182 | |
| 7183 | mpc83xx: Add the MPC832XEMDS board readme |
| 7184 | |
| 7185 | Add the MPC832XEMDS board readme |
| 7186 | |
| 7187 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 7188 | |
| 7189 | commit 24c3aca3f1358b113d3215adb5433b156e99f72b |
| 7190 | Author: Dave Liu <r63238@freescale.com> |
| 7191 | Date: Thu Dec 7 21:13:15 2006 +0800 |
| 7192 | |
| 7193 | mpc83xx: Add support for the MPC832XEMDS board |
| 7194 | |
| 7195 | This patch supports DUART, ETH3/4 and PCI etc. |
| 7196 | |
| 7197 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 7198 | |
| 7199 | commit e080313c32322e15ab5a18eb896a252858c57284 |
| 7200 | Author: Dave Liu <r63238@freescale.com> |
| 7201 | Date: Thu Dec 7 21:11:58 2006 +0800 |
| 7202 | |
| 7203 | mpc83xx: streamline the 83xx immr head file |
| 7204 | |
| 7205 | For better format and style, I streamlined the 83xx head files, |
| 7206 | including immap_83xx.h and mpc83xx.h. In the old head files, 1) |
| 7207 | duplicated macro definition appear in the both files; 2) the structure |
| 7208 | of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The |
| 7209 | macro definition put inside the each structure. So, I cleaned up the |
| 7210 | structure of QE immr from immap_83xx.h, deleted the duplicated stuff and |
| 7211 | moved the macro definition to mpc83xx.h, Just like MPC8260. |
| 7212 | |
| 7213 | CHANGELOG |
| 7214 | |
| 7215 | *streamline the 83xx immr head file |
| 7216 | |
| 7217 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 7218 | |
| 7219 | commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 |
| 7220 | Author: Dave Liu <r63238@freescale.com> |
| 7221 | Date: Wed Dec 6 11:38:17 2006 +0800 |
| 7222 | |
| 7223 | mpc83xx: Fix the UEC driver bug of QE |
| 7224 | |
| 7225 | The patch prevents the GCC tool chain from striping useful code for |
| 7226 | optimization. It will make UEC ethernet driver workable, Otherwise the |
| 7227 | UEC will fail in tx when you are using gcc4.x. but the driver can work |
| 7228 | when using gcc3.4.3. |
| 7229 | |
| 7230 | CHANGELOG |
| 7231 | |
| 7232 | *Prevent the GCC from striping code for optimization, Otherwise the UEC |
| 7233 | will tx failed when you are using gcc4.x. |
| 7234 | |
| 7235 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 7236 | |
Wolfgang Denk | 769104c | 2007-03-08 21:49:27 +0100 | [diff] [blame] | 7237 | commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 |
| 7238 | Author: Stefan Roese <sr@denx.de> |
| 7239 | Date: Thu Mar 1 21:11:36 2007 +0100 |
| 7240 | |
| 7241 | [PATCH] Update AMCC Katmai 440SPe eval board support |
| 7242 | |
| 7243 | This patch updates the recently added Katmai board support. The biggest |
| 7244 | change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 |
| 7245 | driver. |
| 7246 | |
| 7247 | Please note, that still some problems are left with some memory |
| 7248 | configurations. See the driver for more details. |
| 7249 | |
| 7250 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7251 | |
| 7252 | commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a |
| 7253 | Author: Stefan Roese <sr@denx.de> |
| 7254 | Date: Thu Mar 1 07:03:25 2007 +0100 |
| 7255 | |
| 7256 | [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM |
| 7257 | |
| 7258 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7259 | |
| 7260 | commit ccbc7036648e465697ca298ba51e0e76dda352a0 |
| 7261 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7262 | Date: Wed Feb 28 01:28:53 2007 +0100 |
| 7263 | |
| 7264 | SC3: fix typo in default environment |
| 7265 | |
| 7266 | commit e344568b1b46af85ec32d815586f91bc115d6223 |
| 7267 | Author: Sergei Poselenov <sposelenov@emcraft.com> |
| 7268 | Date: Tue Feb 27 20:15:30 2007 +0300 |
| 7269 | |
| 7270 | MCC200: Fixes for update procedure |
| 7271 | |
| 7272 | - fix logic error in image type handling |
| 7273 | - make sure file system images (cramfs etc.) get stored in flash |
| 7274 | with image header stripped so they can be mounted through MTD |
| 7275 | |
| 7276 | commit 743571145b37182757d4e688a77860b36ee77573 |
| 7277 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7278 | Date: Tue Feb 27 14:26:04 2007 +0100 |
| 7279 | |
| 7280 | Minor code cleanup. |
| 7281 | |
Wolfgang Denk | 7435711 | 2007-02-27 14:26:04 +0100 | [diff] [blame] | 7282 | commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 |
| 7283 | Author: Sergei Poselenov <sposelenov@emcraft.com> |
| 7284 | Date: Tue Feb 27 12:40:16 2007 +0300 |
| 7285 | |
| 7286 | MCC200 update - add LCD Progress Indicator |
| 7287 | |
| 7288 | commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 |
| 7289 | Author: Stefan Roese <sr@denx.de> |
| 7290 | Date: Thu Feb 22 07:43:34 2007 +0100 |
| 7291 | |
| 7292 | [PATCH] get_dev() now unconditionally uses manual relocation |
| 7293 | |
| 7294 | Since the relocation fix is not included yet and we're not sure how |
| 7295 | it will be added, this patch removes code that required relocation |
| 7296 | to be fixed for now. |
| 7297 | |
| 7298 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7299 | |
| 7300 | commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b |
| 7301 | Author: Stefan Roese <sr@denx.de> |
| 7302 | Date: Thu Feb 22 07:40:23 2007 +0100 |
| 7303 | |
| 7304 | [PATCH] Change systemace driver to select 8 & 16bit mode |
| 7305 | |
| 7306 | As suggested by Grant Likely this patch enables the Xilinx SystemACE |
| 7307 | driver to select 8 or 16bit mode upon startup. |
| 7308 | |
| 7309 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7310 | |
| 7311 | commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 |
| 7312 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
| 7313 | Date: Wed Feb 21 16:52:31 2007 +0100 |
| 7314 | |
| 7315 | [PATCH v3] Add sync to ensure flash_write_cmd is fully finished |
| 7316 | |
| 7317 | Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command |
| 7318 | is fully finished. The sync() is defined in each CPU's io.h file. For |
| 7319 | those CPUs which do not need sync for now, a dummy sync() is defined in |
| 7320 | their io.h as well. |
| 7321 | |
| 7322 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 7323 | |
| 7324 | commit da04995c7dc6772013a9a0dc5c767f190c402478 |
| 7325 | Author: Stefan Roese <sr@denx.de> |
| 7326 | Date: Wed Feb 21 13:44:34 2007 +0100 |
| 7327 | |
| 7328 | [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) |
| 7329 | |
| 7330 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7331 | |
| 7332 | commit 751bb57107d78978ae08e697c3deba816f5be091 |
| 7333 | Author: Stefan Roese <sr@denx.de> |
| 7334 | Date: Tue Feb 20 13:21:57 2007 +0100 |
| 7335 | |
| 7336 | [PATCH] Fix relocation problem with "new" get_dev() function |
| 7337 | |
| 7338 | This patch enables the "new" get_dev() function for block devices |
| 7339 | introduced by Grant Likely to be used on systems that still suffer |
| 7340 | from the relocation problems (manual relocation neede because of |
| 7341 | problems with linker script). |
| 7342 | |
| 7343 | Hopefully we can resolve this relocation issue soon for all platform |
| 7344 | so we don't need this additional code anymore. |
| 7345 | |
| 7346 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7347 | |
| 7348 | commit d93e2212f962668b3dce091ff5edc33f2347fe37 |
| 7349 | Author: Stefan Roese <sr@denx.de> |
| 7350 | Date: Tue Feb 20 13:17:42 2007 +0100 |
| 7351 | |
| 7352 | [PATCH] Update SystemACE driver for 16bit access |
| 7353 | |
| 7354 | This patch removes some problems when the Xilinx SystemACE driver |
| 7355 | is used with 16bit access on an big endian platform (like the |
| 7356 | AMCC Katmai). |
| 7357 | |
| 7358 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7359 | |
| 7360 | commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 |
| 7361 | Author: Stefan Roese <sr@denx.de> |
| 7362 | Date: Tue Feb 20 13:15:40 2007 +0100 |
| 7363 | |
| 7364 | [PATCH] Clean up Katmai (440SPe) linker script |
| 7365 | |
| 7366 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7367 | |
| 7368 | commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f |
| 7369 | Author: Stefan Roese <sr@denx.de> |
| 7370 | Date: Tue Feb 20 10:57:08 2007 +0100 |
| 7371 | |
| 7372 | [PATCH] Add support for the AMCC Katmai (440SPe) eval board |
| 7373 | |
| 7374 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7375 | |
| 7376 | commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 |
| 7377 | Author: Stefan Roese <sr@denx.de> |
| 7378 | Date: Tue Feb 20 10:51:26 2007 +0100 |
| 7379 | |
| 7380 | [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT |
| 7381 | |
| 7382 | This patch switches to the desired I2C bus when the date/dtt |
| 7383 | commands are called. This can be configured using the |
| 7384 | CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. |
| 7385 | |
| 7386 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7387 | |
| 7388 | commit 4037ed3b63923cfcec27f784a89057c3cbabcedb |
| 7389 | Author: Stefan Roese <sr@denx.de> |
| 7390 | Date: Tue Feb 20 10:43:34 2007 +0100 |
| 7391 | |
| 7392 | [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support |
| 7393 | |
| 7394 | This patch adds support for the DDR2 controller used on the |
| 7395 | 440SP and 440SPe. It is tested on the Katmai (440SPe) eval |
| 7396 | board and works fine with the following DIMM modules: |
| 7397 | |
| 7398 | - Corsair CM2X512-5400C4 (512MByte per DIMM) |
| 7399 | - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) |
| 7400 | - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) |
| 7401 | |
| 7402 | This patch also adds the nice functionality to dynamically |
| 7403 | create the TLB entries for the SDRAM (tlb.c). So we should |
| 7404 | never run into such problems with wrong (too short) TLB |
| 7405 | initialization again on these platforms. |
| 7406 | |
| 7407 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7408 | |
| 7409 | commit 36d830c9830379045f5daa9f542ac1c990c70068 |
| 7410 | Author: Stefan Roese <sr@denx.de> |
| 7411 | Date: Tue Feb 20 10:35:42 2007 +0100 |
| 7412 | |
| 7413 | [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files |
| 7414 | |
| 7415 | Since the existing 4xx SPD SDRAM initialization routines for the |
| 7416 | 405 SDRAM controller and the 440 DDR controller don't have much in |
| 7417 | common this patch splits both drivers into different files. |
| 7418 | |
| 7419 | This is in preparation for the 440 DDR2 controller support (440SP/e). |
| 7420 | |
| 7421 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7422 | |
| 7423 | commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 |
| 7424 | Author: Stefan Roese <sr@denx.de> |
| 7425 | Date: Tue Feb 20 10:27:08 2007 +0100 |
| 7426 | |
| 7427 | [PATCH] PPC4xx: Add support for multiple I2C busses |
| 7428 | |
| 7429 | This patch adds support for multiple I2C busses on the PPC4xx |
| 7430 | platforms. Define CONFIG_I2C_MULTI_BUS in the board config file |
| 7431 | to make use of this feature. |
| 7432 | |
| 7433 | It also merges the 405 and 440 i2c header files into one common |
| 7434 | file 4xx_i2c.h. |
| 7435 | |
| 7436 | Also the 4xx i2c reset procedure is reworked since I experienced |
| 7437 | some problems with the first access on the 440SPe Katmai board. |
| 7438 | |
| 7439 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7440 | |
| 7441 | commit eb867a76238fb38e952c37871b16d0d7fd61c95f |
| 7442 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7443 | Date: Tue Feb 20 09:05:45 2007 +0100 |
| 7444 | |
| 7445 | [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers |
| 7446 | |
| 7447 | Block device read/write is anonymous data; there is no need to use a |
| 7448 | typed pointer. void * is fine. Also add a hook for block_read functions |
| 7449 | |
| 7450 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7451 | |
| 7452 | commit 53758fa20e935cc87eeb0519ed365df753a6f289 |
| 7453 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7454 | Date: Tue Feb 20 09:05:38 2007 +0100 |
| 7455 | |
| 7456 | [PATCH 8_9] Add block_write hook to block_dev_desc_t |
| 7457 | |
| 7458 | Preparation for future patches which support block device writing |
| 7459 | |
| 7460 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7461 | |
| 7462 | commit f4852ebe6ca946a509667eb68be42026f837be76 |
| 7463 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7464 | Date: Tue Feb 20 09:05:31 2007 +0100 |
| 7465 | |
| 7466 | [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros |
| 7467 | |
| 7468 | Register read/write does not need to be wrapped in a full function. The |
| 7469 | patch replaces them with macros. |
| 7470 | |
| 7471 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7472 | |
| 7473 | commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 |
| 7474 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7475 | Date: Tue Feb 20 09:05:23 2007 +0100 |
| 7476 | |
| 7477 | [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c |
| 7478 | |
| 7479 | The code in this file is not a command; it is a device driver. Put it in |
| 7480 | the correct place. There are zero functional changes in this patch, it |
| 7481 | only moves the file. |
| 7482 | |
| 7483 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7484 | |
| 7485 | commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 |
| 7486 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7487 | Date: Tue Feb 20 09:05:16 2007 +0100 |
| 7488 | |
| 7489 | [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) |
| 7490 | |
| 7491 | This patch is in preparation of additional changes to the sysace driver. |
| 7492 | May as well take this opportunity to fixup the inconsistent whitespace since |
| 7493 | this file is about to undergo major changes anyway. |
| 7494 | |
| 7495 | There are zero functional changes in this patch. It only cleans up the |
| 7496 | the whitespace. |
| 7497 | |
| 7498 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7499 | |
| 7500 | commit 80ba981d940471fe7e539e64fa3d2bd80002beda |
| 7501 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7502 | Date: Tue Feb 20 09:05:07 2007 +0100 |
| 7503 | |
| 7504 | [PATCH 4_4] Remove local implementation of isprint() in ft_build.c |
| 7505 | |
| 7506 | isprint is already defined in ctype.c |
| 7507 | |
| 7508 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7509 | |
| 7510 | commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 |
| 7511 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7512 | Date: Tue Feb 20 09:05:00 2007 +0100 |
| 7513 | |
| 7514 | [PATCH 3_9] Move buffer print code from md command to common function |
| 7515 | |
| 7516 | Printing a buffer is a darn useful thing. Move the buffer print code |
| 7517 | into print_buffer() in lib_generic/ |
| 7518 | |
| 7519 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7520 | |
| 7521 | commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a |
| 7522 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7523 | Date: Tue Feb 20 09:04:52 2007 +0100 |
| 7524 | |
| 7525 | [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets |
| 7526 | |
| 7527 | Change the xilinx device drivers and board code to include config.h |
| 7528 | instead of xparameters.h directly. config.h always includes the |
| 7529 | correct xparameters file. This change reduces the posibility of |
| 7530 | including the wrong file when adding a new xilinx board port |
| 7531 | |
| 7532 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7533 | |
| 7534 | commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 |
| 7535 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 7536 | Date: Tue Feb 20 09:04:34 2007 +0100 |
| 7537 | |
| 7538 | [PATCH 1_4] Merge common get_dev() routines for block devices |
| 7539 | |
| 7540 | Each of the filesystem drivers duplicate the get_dev routine. This change |
| 7541 | merges them into a single function in part.c |
| 7542 | |
| 7543 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 7544 | |
| 7545 | commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 |
| 7546 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7547 | Date: Mon Feb 19 23:09:51 2007 +0100 |
| 7548 | |
| 7549 | MCC200: Software Updater: allow both "ramdisk" and "filesystem" types |
| 7550 | as root file system images. |
| 7551 | |
| 7552 | commit 489c696ae7211218961d159e43e722d74c36fcbc |
| 7553 | Author: Sergei Poselenov <sposelenov@emcraft.com> |
| 7554 | Date: Wed Feb 14 14:30:28 2007 +0300 |
| 7555 | |
| 7556 | MCC200: Extensions to Software Update Mechanism |
| 7557 | |
| 7558 | Update / extend Software Update Mechanism for MCC200 board: |
| 7559 | |
| 7560 | - Add support for rootfs image added. The environment variables |
| 7561 | "rootfs_st" and "rootfs_nd" can be used to override the default |
| 7562 | values of the image start and end. |
| 7563 | - Remove excessive key check code. |
| 7564 | - Code cleanup. |
| 7565 | |
| 7566 | commit 4be23a12f23f1372634edc3215137b09768b7949 |
| 7567 | Author: Stefan Roese <sr@denx.de> |
| 7568 | Date: Mon Feb 19 08:23:15 2007 +0100 |
| 7569 | |
| 7570 | [PATCH] Update Sequoia EBC configuration (NOR FLASH) |
| 7571 | |
| 7572 | As spotted by Matthias Fuchs, the READY input should not be |
| 7573 | enabled for the NOR FLASH on the Sequoia board. |
| 7574 | |
| 7575 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7576 | |
Wolfgang Denk | 769104c | 2007-03-08 21:49:27 +0100 | [diff] [blame] | 7577 | commit 2605e90bf676d48123afe5719a846d2b52b24aac |
| 7578 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7579 | Date: Fri Feb 16 07:57:42 2007 +0100 |
| 7580 | |
| 7581 | [PATCH] Added support for the jupiter board. |
| 7582 | |
| 7583 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7584 | |
Wolfgang Denk | 7435711 | 2007-02-27 14:26:04 +0100 | [diff] [blame] | 7585 | commit 497d012e5be0194e1084073d0081eb1a844796b2 |
| 7586 | Author: Gary Jennejohn <garyj@pollux.denx.de> |
| 7587 | Date: Mon Feb 12 13:11:50 2007 +0100 |
| 7588 | |
| 7589 | LPC2292: patch from Siemens. |
| 7590 | |
| 7591 | commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 |
| 7592 | Author: Stefan Roese <sr@denx.de> |
| 7593 | Date: Sat Feb 10 08:49:31 2007 +0100 |
| 7594 | |
| 7595 | [PATCH] Add missing p3mx.h file to repository (ups) |
| 7596 | |
| 7597 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7598 | |
| 7599 | commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a |
| 7600 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 7601 | Date: Fri Feb 9 10:45:42 2007 +0100 |
| 7602 | |
| 7603 | [Motion-PRO] Preliminary support for the Motion-PRO board. |
| 7604 | |
| 7605 | commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 |
| 7606 | Author: Stefan Roese <sr@denx.de> |
| 7607 | Date: Wed Feb 7 16:51:08 2007 +0100 |
| 7608 | |
| 7609 | [PATCH] Update some AMCC 4xx board config files (set initrd_high) |
| 7610 | |
| 7611 | Some boards that can have more than 768MBytes of SDRAM need to |
| 7612 | set "initrd_high", so that the initrd can be accessed by the |
| 7613 | Linux kernel. |
| 7614 | |
| 7615 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7616 | |
| 7617 | commit 7372ca68227930d03cffa548310524cad5b96733 |
| 7618 | Author: Stefan Roese <sr@denx.de> |
| 7619 | Date: Fri Feb 2 12:44:22 2007 +0100 |
| 7620 | |
| 7621 | [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards |
| 7622 | |
| 7623 | Previously the strapping DCR/SDR was read to determine if the internal PCI |
| 7624 | arbiter is enabled or not. This strapping bit can be overridden, so now |
| 7625 | the current status is read from the correct DCR/SDR register. |
| 7626 | |
| 7627 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7628 | |
| 7629 | commit 2aa54f651a42d198673318f07a20c89a43e4d197 |
| 7630 | Author: Stefan Roese <sr@denx.de> |
| 7631 | Date: Fri Feb 2 12:42:08 2007 +0100 |
| 7632 | |
| 7633 | [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier |
| 7634 | |
| 7635 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7636 | |
| 7637 | commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b |
| 7638 | Author: Stefan Roese <sr@denx.de> |
| 7639 | Date: Thu Feb 1 13:22:41 2007 +0100 |
| 7640 | |
| 7641 | [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file |
| 7642 | |
| 7643 | When PCI PNP is enabled the pci pnp configuration routine is called |
| 7644 | which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some |
| 7645 | problems with some PCI cards. For now disable the PCI PNP configuration. |
| 7646 | |
| 7647 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7648 | |
| 7649 | commit 2902fadade3be7659467e8d074048c6b7068f5c0 |
| 7650 | Author: Stefan Roese <sr@denx.de> |
| 7651 | Date: Wed Jan 31 16:56:10 2007 +0100 |
| 7652 | |
| 7653 | [PATCH] Update 440EPx/440GRx cpu detection |
| 7654 | |
| 7655 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7656 | |
| 7657 | commit d5ea287b02a6945c3977410e364a879dd1a555c8 |
| 7658 | Author: Stefan Roese <sr@denx.de> |
| 7659 | Date: Wed Jan 31 16:38:04 2007 +0100 |
| 7660 | |
| 7661 | [PATCH] Update esd cpci5200 files |
| 7662 | |
| 7663 | Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| 7664 | |
| 7665 | commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab |
| 7666 | Author: Stefan Roese <sr@denx.de> |
| 7667 | Date: Wed Jan 31 16:37:34 2007 +0100 |
| 7668 | |
| 7669 | [PATCH] Add support for esd mecp5200 board |
| 7670 | |
| 7671 | Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| 7672 | |
| 7673 | commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff |
| 7674 | Author: Stefan Roese <sr@denx.de> |
| 7675 | Date: Wed Jan 31 12:38:50 2007 +0100 |
| 7676 | |
| 7677 | [PATCH] Remove unneccessary yellowstone board config file |
| 7678 | |
| 7679 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7680 | |
| 7681 | commit e802594b6fa1b166308820c276b96dc0d7cc731c |
| 7682 | Author: Stefan Roese <sr@denx.de> |
| 7683 | Date: Tue Jan 30 17:06:10 2007 +0100 |
| 7684 | |
| 7685 | [PATCH] Update Sequoia (440EPx) config file |
| 7686 | |
| 7687 | The config file now handles the 2nd target, the Rainier (440GRx) |
| 7688 | evaluation board better. Additionally the PPC input clock was |
| 7689 | adjusted to match the correct value of 33.0 MHz. |
| 7690 | |
| 7691 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7692 | |
| 7693 | commit 700200c67e73b83751418abe7815840dca8fd6cb |
| 7694 | Author: Stefan Roese <sr@denx.de> |
| 7695 | Date: Tue Jan 30 17:04:19 2007 +0100 |
| 7696 | |
| 7697 | [PATCH] Merge Yosemite & Yellowstone board ports |
| 7698 | |
| 7699 | Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) |
| 7700 | share one config file and all board specific files. This way we |
| 7701 | don't have to maintain two different sets of files for nearly |
| 7702 | identical boards. |
| 7703 | |
| 7704 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7705 | |
| 7706 | commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 |
| 7707 | Author: Stefan Roese <sr@denx.de> |
| 7708 | Date: Tue Jan 30 15:01:49 2007 +0100 |
| 7709 | |
| 7710 | [PATCH] Update Prodrive SCPU (PDNB3 variant) board |
| 7711 | |
| 7712 | SCPU doesn't use redundant environment in flash. |
| 7713 | |
| 7714 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7715 | |
| 7716 | commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 |
| 7717 | Author: Stefan Roese <sr@denx.de> |
| 7718 | Date: Tue Jan 30 12:51:07 2007 +0100 |
| 7719 | |
| 7720 | [PATCH] alpr: Update alpr board config file |
| 7721 | |
| 7722 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7723 | |
| 7724 | commit f8db84f132b1e335f20f96138a1f09ed97b08664 |
| 7725 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7726 | Date: Tue Jan 30 00:50:40 2007 +0100 |
| 7727 | |
| 7728 | LPC2292 SODIMM port coding style cleanup. |
| 7729 | |
Wolfgang Denk | f8db84f | 2007-01-30 00:50:40 +0100 | [diff] [blame] | 7730 | commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 |
| 7731 | Author: Gary Jennejohn <garyj@pollux.denx.de> |
| 7732 | Date: Wed Jan 24 12:16:56 2007 +0100 |
| 7733 | |
| 7734 | Add port for the lpc2292sodimm evaluation board from EmbeddedArtists |
| 7735 | |
| 7736 | commit 2daf046ba627f85f44195815778140039636244e |
| 7737 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 7738 | Date: Tue Jan 23 17:22:06 2007 +0100 |
| 7739 | |
| 7740 | [iDMR] Add MTD and JFFS2 support, also add default partition definition. |
| 7741 | |
| 7742 | commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 |
| 7743 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 7744 | Date: Tue Jan 23 14:21:14 2007 +0100 |
| 7745 | |
| 7746 | [iDMR] Flash driver on initialisation write-protects some sectors, |
| 7747 | currently sectors 0-3. Sector 3 does not need to be protected, though |
| 7748 | (U-boot occupies sectors 0-1 and the environment sector 2). This commit |
| 7749 | fixes this, i.e., only sectors 0-2 are protected. |
| 7750 | |
| 7751 | commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de |
| 7752 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 7753 | Date: Tue Jan 23 14:11:22 2007 +0100 |
| 7754 | |
| 7755 | [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., |
| 7756 | "mii device" results in "Unexpected exception"). Fixing this properly |
| 7757 | requires some clean-up in the FEC drivers infrastructure for ColdFire, so |
| 7758 | this commit disables MII commads for now. |
| 7759 | |
| 7760 | commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c |
| 7761 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 7762 | Date: Tue Jan 23 13:25:22 2007 +0100 |
| 7763 | |
| 7764 | [ColdFire MCF5271 family] Add CPU detection based on the value of Chip |
| 7765 | Identification Register (CIR). |
| 7766 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 7767 | commit fdef388758506765d4d6a7155c8f1584c63ff581 |
| 7768 | Author: roy zang <tie-fei.zang@freescale.com> |
| 7769 | Date: Mon Jan 22 13:19:21 2007 +0800 |
| 7770 | |
| 7771 | use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP |
| 7772 | The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 |
| 7773 | fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support |
| 7774 | mpc7448hpc2 board. |
| 7775 | |
Wolfgang Denk | f8db84f | 2007-01-30 00:50:40 +0100 | [diff] [blame] | 7776 | commit a4012396645533aef218354eeba754dff0deace8 |
| 7777 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7778 | Date: Fri Jan 19 23:08:39 2007 +0100 |
| 7779 | |
| 7780 | Minor code cleanup. |
| 7781 | |
Wolfgang Denk | a401239 | 2007-01-19 23:08:39 +0100 | [diff] [blame] | 7782 | commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 |
| 7783 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7784 | Date: Fri Jan 19 19:57:10 2007 +0100 |
| 7785 | |
| 7786 | [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. |
| 7787 | |
| 7788 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7789 | |
| 7790 | commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 |
| 7791 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7792 | Date: Fri Jan 19 18:05:26 2007 +0100 |
| 7793 | |
| 7794 | [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver |
| 7795 | if you must swap the bytes between reading/writing. |
| 7796 | (Needed for the SC3 board) |
| 7797 | |
| 7798 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7799 | |
| 7800 | commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 |
| 7801 | Author: Stefan Roese <sr@denx.de> |
| 7802 | Date: Thu Jan 18 16:05:47 2007 +0100 |
| 7803 | |
| 7804 | [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board |
| 7805 | |
| 7806 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7807 | |
| 7808 | commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e |
| 7809 | Author: Stefan Roese <sr@denx.de> |
| 7810 | Date: Thu Jan 18 11:54:52 2007 +0100 |
| 7811 | |
| 7812 | [PATCH] Update Prodrive P3Mx support |
| 7813 | |
| 7814 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7815 | |
| 7816 | commit 34167a36c29ee946b727465db5c014746a08e978 |
| 7817 | Author: Stefan Roese <sr@denx.de> |
| 7818 | Date: Thu Jan 18 11:48:10 2007 +0100 |
| 7819 | |
| 7820 | [PATCH] Add missing Taishan config file |
| 7821 | |
| 7822 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7823 | |
| 7824 | commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 |
| 7825 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7826 | Date: Thu Jan 18 11:28:51 2007 +0100 |
| 7827 | |
| 7828 | [PATCH] Fix: Compilerwarnings for SC3 board. |
| 7829 | The EBC Configuration Register is now by CFG_EBC_CFG definable |
| 7830 | Added JFFS2 support for the SC3 board. |
| 7831 | |
| 7832 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7833 | |
| 7834 | commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd |
| 7835 | Author: Stefan Roese <sr@denx.de> |
| 7836 | Date: Thu Jan 18 10:25:34 2007 +0100 |
| 7837 | |
| 7838 | [PATCH] Add support for AMCC Taishan PPC440GX eval board |
| 7839 | |
| 7840 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7841 | |
| 7842 | commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad |
| 7843 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7844 | Date: Tue Jan 16 18:30:50 2007 +0100 |
| 7845 | |
| 7846 | Raname solidcard3 into sc3; add redundant env for sc3 |
| 7847 | |
Wolfgang Denk | 6d3e010 | 2007-01-16 18:30:50 +0100 | [diff] [blame] | 7848 | commit 1bbbbdd20fcec9933697000dcf55ff7972622596 |
| 7849 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7850 | Date: Tue Jan 16 12:46:35 2007 +0100 |
| 7851 | |
| 7852 | Update default environment for Solidcard3 |
| 7853 | |
Wolfgang Denk | f11033e | 2007-01-15 13:41:04 +0100 | [diff] [blame] | 7854 | commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd |
| 7855 | Author: Stefan Roese <sr@denx.de> |
| 7856 | Date: Mon Jan 15 09:46:29 2007 +0100 |
| 7857 | |
| 7858 | [PATCH] Fix 440SPe rev B detection from previous patch |
| 7859 | |
| 7860 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7861 | |
| 7862 | commit a443d31410c571ee8f970da819a44d698fdd6b1f |
| 7863 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7864 | Date: Sun Jan 14 13:35:31 2007 +0100 |
| 7865 | |
| 7866 | [FIX] correct I2C Writes for the LM81 Sensor. |
| 7867 | |
| 7868 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7869 | |
| 7870 | commit 0bba5452835f19a61204edcda3a58112fd8e2208 |
| 7871 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7872 | Date: Sat Jan 13 11:17:10 2007 +0100 |
| 7873 | |
| 7874 | Undo commit 3033ebb2: reset command does not take any arguments |
| 7875 | |
| 7876 | Haiying Wang's modification to the reset command was broken, undo it. |
| 7877 | |
| 7878 | Signed-off-by: Wolfgang Denk <wd@denx.de> |
| 7879 | |
| 7880 | commit 95981778cff0038fd9941044d6a3eda810e33258 |
| 7881 | Author: Stefan Roese <sr@denx.de> |
| 7882 | Date: Sat Jan 13 08:01:03 2007 +0100 |
| 7883 | |
| 7884 | [PATCH] Update 440SP(e) cpu revisions |
| 7885 | |
| 7886 | Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. |
| 7887 | |
| 7888 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7889 | |
| 7890 | commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 |
| 7891 | Author: Stefan Roese <sr@denx.de> |
| 7892 | Date: Sat Jan 13 07:59:56 2007 +0100 |
| 7893 | |
| 7894 | [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed |
| 7895 | |
| 7896 | Now the board revision and the current PCI bus speed are printed after |
| 7897 | the board message. |
| 7898 | |
| 7899 | Also the EBC initialising is now done via defines in the board config |
| 7900 | file. |
| 7901 | |
| 7902 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7903 | |
| 7904 | commit 36adff362c2c0141ff8a810d42a7e478f779130f |
| 7905 | Author: Stefan Roese <sr@denx.de> |
| 7906 | Date: Sat Jan 13 07:59:19 2007 +0100 |
| 7907 | |
| 7908 | [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed |
| 7909 | |
| 7910 | Now the board revision and the current PCI bus speed are printed after |
| 7911 | the board message. |
| 7912 | |
| 7913 | Also the EBC initialising is now done via defines in the board config |
| 7914 | file. |
| 7915 | |
| 7916 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7917 | |
| 7918 | commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 |
| 7919 | Author: Stefan Roese <sr@denx.de> |
| 7920 | Date: Sat Jan 13 07:57:51 2007 +0100 |
| 7921 | |
| 7922 | [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed |
| 7923 | |
| 7924 | Now the board revision and the current PCI bus speed are printed after |
| 7925 | the board message. |
| 7926 | |
| 7927 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 7928 | |
Wolfgang Denk | 6d3e010 | 2007-01-16 18:30:50 +0100 | [diff] [blame] | 7929 | commit ca43ba18e910206ef8063e4b22d282630bff3fd2 |
| 7930 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 7931 | Date: Thu Jan 11 15:44:44 2007 +0100 |
| 7932 | |
| 7933 | Added support for the SOLIDCARD III board from Eurodesign |
| 7934 | |
| 7935 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 7936 | |
Wolfgang Denk | f11033e | 2007-01-15 13:41:04 +0100 | [diff] [blame] | 7937 | commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 |
| 7938 | Author: Reinhard Thies <Reinhard.Thies@web.de> |
| 7939 | Date: Wed Jan 10 14:41:14 2007 +0100 |
| 7940 | |
| 7941 | Adjusted default environment for cam5200 board. |
| 7942 | |
| 7943 | commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 |
| 7944 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7945 | Date: Wed Jan 10 15:35:52 2007 +0100 |
| 7946 | |
| 7947 | Update CHANGELOG |
| 7948 | |
Wolfgang Denk | bab5a90 | 2007-01-10 15:35:52 +0100 | [diff] [blame] | 7949 | commit 787fa15860a57833e50bd30555079a9cd4e519b8 |
| 7950 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 7951 | Date: Wed Jan 10 01:28:39 2007 +0100 |
| 7952 | |
| 7953 | Fix auto_update for MCC200 board. |
| 7954 | |
| 7955 | The invocation of do_auto_update() is moved to the end of the |
| 7956 | misc_init_r() function, after the flash mappings have been |
| 7957 | initialized. Please find attached a patch that implements that |
| 7958 | change. |
| 7959 | |
| 7960 | Also correct the decoding of the keypad status. With this update, the |
| 7961 | key that will trigger the update is Column 2, Row 2. |
| 7962 | |
Wolfgang Denk | f11033e | 2007-01-15 13:41:04 +0100 | [diff] [blame] | 7963 | commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 |
| 7964 | Author: Marian Balakowicz <m8@semihalf.com> |
| 7965 | Date: Wed Jan 10 00:26:15 2007 +0100 |
| 7966 | |
| 7967 | CAM5200 flash driver modifications: |
| 7968 | - use CFI driver (replaces custom flash driver) for main 'cam5200' target |
| 7969 | - add second build target 'cam5200_niosflash' which still uses custom driver |
| 7970 | |
Wolfgang Denk | bab5a90 | 2007-01-10 15:35:52 +0100 | [diff] [blame] | 7971 | commit 67fea022fa957f59653b5238c7496f80a6b70432 |
| 7972 | Author: Markus Klotzbuecher <mk@denx.de> |
| 7973 | Date: Tue Jan 9 16:02:48 2007 +0100 |
| 7974 | |
| 7975 | SPC1920: cleanup memory contoller setup |
| 7976 | |
| 7977 | commit 8fc2102faa23593c80381437c09f7745a14deb40 |
| 7978 | Author: Markus Klotzbuecher <mk@denx.de> |
| 7979 | Date: Tue Jan 9 14:57:14 2007 +0100 |
| 7980 | |
| 7981 | Fix the cpu speed setup to work with all boards. |
| 7982 | |
| 7983 | commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c |
| 7984 | Author: Markus Klotzbuecher <mk@denx.de> |
| 7985 | Date: Tue Jan 9 14:57:13 2007 +0100 |
| 7986 | |
| 7987 | SPC1920: add support for the FM18L08 Ramtron FRAM |
| 7988 | |
| 7989 | commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 |
| 7990 | Author: Markus Klotzbuecher <mk@denx.de> |
| 7991 | Date: Tue Jan 9 14:57:13 2007 +0100 |
| 7992 | |
| 7993 | SPC1920: update the HPI register addresses to work with the second |
| 7994 | generation of hardware |
| 7995 | |
| 7996 | commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e |
| 7997 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 7998 | Date: Tue Jan 9 14:57:13 2007 +0100 |
| 7999 | |
| 8000 | Miscellanious spc1920 related cleanups |
| 8001 | |
| 8002 | commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 |
| 8003 | Author: Markus Klotzbuecher <mk@denx.de> |
| 8004 | Date: Tue Jan 9 14:57:12 2007 +0100 |
| 8005 | |
| 8006 | SPC1920 GO/NOGO led should be set to color red in U-Boot |
| 8007 | |
| 8008 | commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 |
| 8009 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 8010 | Date: Tue Jan 9 14:57:12 2007 +0100 |
| 8011 | |
| 8012 | Add support for the DS3231 RTC |
| 8013 | |
| 8014 | commit 8139567b60d678584b05f0718a681f2047c5e14f |
| 8015 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 8016 | Date: Tue Jan 9 14:57:11 2007 +0100 |
| 8017 | |
| 8018 | SMC1 uses external CLK4 instead of BRG on spc1920 |
| 8019 | |
| 8020 | commit d8d9de1a02fbd880b613d607143d1f57342affc7 |
| 8021 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 8022 | Date: Tue Jan 9 14:57:10 2007 +0100 |
| 8023 | |
| 8024 | Update the SPC1920 CMB PLD driver |
| 8025 | |
| 8026 | commit 3f34f869162750e5e999fd140f884f5de952bcfe |
| 8027 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 8028 | Date: Tue Jan 9 14:57:10 2007 +0100 |
| 8029 | |
| 8030 | Add / enable I2C support on the spc1920 board |
| 8031 | |
| 8032 | commit d28707dbce1e9ac2017ad051da4133bf22b4204f |
| 8033 | Author: Markus Klotzbuecher <mk@creamnet.de> |
| 8034 | Date: Tue Jan 9 14:57:10 2007 +0100 |
| 8035 | |
| 8036 | Add support for the tms320671x host port interface (HPI) |
| 8037 | |
| 8038 | commit f4eb54529bb3664c3a562e488b460fe075f79d67 |
| 8039 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8040 | Date: Sun Jan 7 00:13:11 2007 +0100 |
| 8041 | |
| 8042 | Prepare for release 1.2.0 |
| 8043 | |
Wolfgang Denk | f4eb545 | 2007-01-07 00:13:11 +0100 | [diff] [blame] | 8044 | commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 |
| 8045 | Author: Stefan Roese <sr@denx.de> |
| 8046 | Date: Sat Jan 6 15:58:09 2007 +0100 |
| 8047 | |
| 8048 | [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) |
| 8049 | |
| 8050 | This patch fixes a problem with an incorrect setup for the refresh |
| 8051 | timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c |
| 8052 | |
| 8053 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8054 | |
| 8055 | commit f16c1da9577f06c5fc08651a4065537407de4635 |
| 8056 | Author: Stefan Roese <sr@denx.de> |
| 8057 | Date: Sat Jan 6 15:56:13 2007 +0100 |
| 8058 | |
| 8059 | [PATCH] Update ALPR board files |
| 8060 | |
| 8061 | This update brings the ALPR board support to the newest version. |
| 8062 | It also fixes a problem with the NAND driver. |
| 8063 | |
| 8064 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8065 | |
| 8066 | commit cd1d937f90250a32988c37b2b4af8364d25de8ed |
| 8067 | Author: Stefan Roese <sr@denx.de> |
| 8068 | Date: Fri Jan 5 11:46:05 2007 +0100 |
| 8069 | |
| 8070 | [PATCH] nand: Fix problem with oobsize calculation |
| 8071 | |
| 8072 | Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: |
| 8073 | |
| 8074 | The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part |
| 8075 | returns a 0x15. In the code fragment below bits [1:0] determine the |
| 8076 | page size, it is ANDed via "(extid & 0x3)" then shifted out. The |
| 8077 | next field is also ANDed with 0x3. However this is a one bit field |
| 8078 | as defined in the Hynix and Samsung parts in the 4th ID byte that |
| 8079 | determins the oobsize, not a two bit field. It works on Samsung as |
| 8080 | bits[3:2] are 01. However for the Hynix there is a 11 in these two |
| 8081 | bits, so the oob size gets messed up. |
| 8082 | |
| 8083 | I checked the correct linux code and the suggested fix from Brian is |
| 8084 | also available in the linux nand mtd driver. |
| 8085 | |
| 8086 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8087 | |
| 8088 | commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e |
| 8089 | Author: Stefan Roese <sr@denx.de> |
| 8090 | Date: Fri Jan 5 10:40:36 2007 +0100 |
| 8091 | |
| 8092 | [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) |
| 8093 | |
| 8094 | This fix will make the MAL burst disabling patch for the Linux |
| 8095 | EMAC driver obsolete. |
| 8096 | |
| 8097 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8098 | |
| 8099 | commit 023889838282b6237b401664f22dd22dfba2c066 |
| 8100 | Author: Stefan Roese <sr@denx.de> |
| 8101 | Date: Fri Jan 5 10:38:05 2007 +0100 |
| 8102 | |
| 8103 | [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board |
| 8104 | |
| 8105 | This code will optimize the DDR2 controller setup on a board specific |
| 8106 | basis. |
| 8107 | |
| 8108 | Note: This code doesn't work right now on the NAND booting image for the |
| 8109 | Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. |
| 8110 | |
| 8111 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8112 | |
| 8113 | commit cce4acbb68398634b8d011ed7bb0d12269c84230 |
| 8114 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 8115 | Date: Thu Dec 28 19:08:21 2006 +0100 |
| 8116 | |
| 8117 | Few V38B changes: |
| 8118 | - fix a typo in V38B config file |
| 8119 | - move watchdog initialisation earlier in the boot process |
| 8120 | - add "wdt=off" to default kernel command line (disables kernel watchdog) |
| 8121 | |
| 8122 | commit 92eb729bad876725aeea908d2addba0800620840 |
| 8123 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8124 | Date: Wed Dec 27 01:26:13 2006 +0100 |
| 8125 | |
| 8126 | Fix bug in adaption of Stefano Babic's CFI driver patch. |
| 8127 | |
| 8128 | commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 |
| 8129 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8130 | Date: Sun Dec 24 01:42:57 2006 +0100 |
| 8131 | |
| 8132 | Minor code cleanup. |
| 8133 | |
| 8134 | commit d784fdb05900ada3686d5778783e1fb328e9fb66 |
| 8135 | Author: Stefano Babic <sbabic@denx.de> |
| 8136 | Date: Tue Dec 12 00:22:42 2006 +0100 |
| 8137 | |
| 8138 | Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) |
| 8139 | |
| 8140 | commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 |
| 8141 | Author: Stefan Roese <sr@denx.de> |
| 8142 | Date: Fri Dec 22 14:29:40 2006 +0100 |
| 8143 | |
| 8144 | [PATCH] Fix sequoia flash autodetection (finally correct) |
| 8145 | |
| 8146 | Now 32MByte and 64MByte FLASH is know to work and other |
| 8147 | configurations should work too. |
| 8148 | |
| 8149 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8150 | |
| 8151 | commit 82e5236a8b719543643fd26d5827938ab2b94818 |
| 8152 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8153 | Date: Fri Dec 22 10:30:26 2006 +0100 |
| 8154 | |
| 8155 | Minor code cleanup; update CHANGELOG. |
| 8156 | |
| 8157 | commit fa23044564091f05d9695beb7b5b9a931e7f41a4 |
| 8158 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 8159 | Date: Thu Dec 21 17:17:02 2006 +0100 |
| 8160 | |
| 8161 | Added support for the TQM8272 board from TQ |
| 8162 | |
| 8163 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 8164 | |
Wolfgang Denk | f11033e | 2007-01-15 13:41:04 +0100 | [diff] [blame] | 8165 | commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c |
| 8166 | Author: Heiko Schocher <hs@pollux.denx.de> |
| 8167 | Date: Thu Dec 21 16:14:48 2006 +0100 |
| 8168 | |
| 8169 | [PATCH] Add support for the UC101 board from MAN. |
| 8170 | |
| 8171 | Signed-off-by: Heiko Schocher <hs@denx.de> |
| 8172 | |
Wolfgang Denk | 82e5236 | 2006-12-22 10:30:26 +0100 | [diff] [blame] | 8173 | commit c84bad0ef60e7055ab0bd49b93069509cecc382a |
| 8174 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 8175 | Date: Wed Dec 20 00:29:43 2006 +0100 |
| 8176 | |
| 8177 | Fix to make the baudrate changes immediate for the MCF52x2 family. |
| 8178 | |
| 8179 | commit daa6e418bcc0c717752e8de939c213c790286096 |
| 8180 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 8181 | Date: Wed Dec 20 00:27:32 2006 +0100 |
| 8182 | |
| 8183 | Preliminary support for the iDMR board (ColdFire). |
| 8184 | |
| 8185 | commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 |
| 8186 | Author: Andrei Safronov <safronov@pollux.denx.de> |
| 8187 | Date: Fri Dec 8 16:23:08 2006 +0100 |
| 8188 | |
| 8189 | automatic update mechanism |
| 8190 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 8191 | commit 9d27b3a0685ff99fc477983f315c04d49f657a8a |
| 8192 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8193 | Date: Mon Dec 4 17:56:59 2006 +0800 |
| 8194 | |
| 8195 | Slight code clean up. |
| 8196 | Add comments, delete duplicate define and remove spaces. |
| 8197 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 8198 | |
| 8199 | commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 |
| 8200 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8201 | Date: Mon Dec 4 17:54:21 2006 +0800 |
| 8202 | |
| 8203 | Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original |
| 8204 | multiplier table can not refect the real PLL clock behavior of these |
| 8205 | processors. Please refer to the hardware specification for detailed |
| 8206 | information of the corresponding processors. |
| 8207 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 8208 | |
| 8209 | commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 |
| 8210 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8211 | Date: Mon Dec 4 14:46:23 2006 +0800 |
| 8212 | |
| 8213 | Remove the static MAC address, ip address, server ip, netmask and |
| 8214 | gateway ip for network setting. |
| 8215 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 8216 | |
| 8217 | commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf |
| 8218 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8219 | Date: Mon Dec 4 14:33:08 2006 +0800 |
| 8220 | |
| 8221 | Remove the duplicate memory test code for mpc744ihpc2 board. |
| 8222 | If a memory test is needed, please use the functions in |
| 8223 | post/memory.c or memtest command. |
| 8224 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 8225 | |
| 8226 | commit c9c1eeed7dd193fa65fb194654132040d49d4d3a |
| 8227 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8228 | Date: Fri Dec 1 19:01:25 2006 +0800 |
| 8229 | |
| 8230 | Fix the exception occuring in RAM table search issue. |
| 8231 | The original search_one_table() function code can only processes the search |
| 8232 | for the exception occurring in FLASH/ROM, because the exception and fixup |
| 8233 | table usually locate in FLASH. If the exception address is also in |
| 8234 | FLASH, it will be OK. |
| 8235 | If the exception occurs in RAM, after the u-boot relocation, a |
| 8236 | relocation offset should be added. |
| 8237 | |
| 8238 | clean up the code in cpu/74xx_7xx/cpu.c |
| 8239 | |
| 8240 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 8241 | |
| 8242 | commit ee311214e0d216f904feea269599d0934bf71f23 |
| 8243 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8244 | Date: Fri Dec 1 11:47:36 2006 +0800 |
| 8245 | |
| 8246 | Clean up the code according to codestyle: |
| 8247 | (1) remove some C++ comments. |
| 8248 | (2) remove trailing white space. |
| 8249 | (3) remove trailing empty line. |
| 8250 | (4) Indentation by table. |
| 8251 | (5) remove {} in one line condition. |
| 8252 | (6) add space before '(' in function call. |
| 8253 | Remove some weird printf () output. |
| 8254 | Add necessary comments. |
| 8255 | Modified Makefile to support building in a separate directory. |
| 8256 | |
Wolfgang Denk | 82e5236 | 2006-12-22 10:30:26 +0100 | [diff] [blame] | 8257 | commit dd520bf314c7add4183c5191692180f576f96b60 |
| 8258 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8259 | Date: Thu Nov 30 18:02:20 2006 +0100 |
| 8260 | |
| 8261 | Code cleanup. |
| 8262 | |
Wolfgang Denk | dd520bf | 2006-11-30 18:02:20 +0100 | [diff] [blame] | 8263 | commit 8d9a8610b8256331132227e9e6585c6bd5742787 |
| 8264 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8265 | Date: Thu Nov 30 01:54:07 2006 +0100 |
| 8266 | |
| 8267 | Code cleanup. Update CHANGELOG. |
| 8268 | |
Wolfgang Denk | 8d9a861 | 2006-11-30 01:54:07 +0100 | [diff] [blame] | 8269 | commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba |
| 8270 | Author: Grant Likely <grant.likely@secretlab.ca> |
| 8271 | Date: Wed Nov 29 16:23:42 2006 +0100 |
| 8272 | |
| 8273 | [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals |
| 8274 | |
| 8275 | The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, |
| 8276 | not the XLB frequency. |
| 8277 | |
| 8278 | This patch depends on the previous patches for MPC52xx device tree support |
| 8279 | |
| 8280 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 8281 | Signed-off-by: Sylvain Munaut <tnt@246tNt.com> |
| 8282 | |
| 8283 | commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 |
| 8284 | Author: Stefan Roese <sr@denx.de> |
| 8285 | Date: Wed Nov 29 15:42:37 2006 +0100 |
| 8286 | |
| 8287 | [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards |
| 8288 | |
| 8289 | This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) |
| 8290 | and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are |
| 8291 | quite similar and share the same board directory "prodrive/p3mx" |
| 8292 | and the same config file "p3mx.h". |
| 8293 | |
| 8294 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8295 | |
| 8296 | commit 1bdd46832aeb569f5e04b1f20f64318525b6525a |
| 8297 | Author: Stefan Roese <sr@denx.de> |
| 8298 | Date: Wed Nov 29 12:53:15 2006 +0100 |
| 8299 | |
| 8300 | [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command |
| 8301 | |
| 8302 | In the bootvx command the load address was only read from the env |
| 8303 | variable "loadaddr" and not optionally passed as paramter as described |
| 8304 | in the help. This is fixed with this patch. The behaviour is now the |
| 8305 | same as in the bootelf command. |
| 8306 | |
| 8307 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8308 | |
| 8309 | commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 |
| 8310 | Author: Stefan Roese <sr@denx.de> |
| 8311 | Date: Wed Nov 29 12:03:57 2006 +0100 |
| 8312 | |
| 8313 | [PATCH] include/ppc440.h minor error affecting interrupts |
| 8314 | |
| 8315 | Fixed include/ppc440.c for UIC address Bug |
| 8316 | |
| 8317 | Corrects bug affecting the addresses for the universal interrupt |
| 8318 | controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. |
| 8319 | |
| 8320 | Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| 8321 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8322 | |
Wolfgang Denk | dd520bf | 2006-11-30 18:02:20 +0100 | [diff] [blame] | 8323 | commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a |
| 8324 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| 8325 | Date: Tue Nov 28 16:17:27 2006 -0600 |
| 8326 | |
| 8327 | Make fsl-i2c not conflict with SOFT I2C |
| 8328 | |
| 8329 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8330 | |
| 8331 | commit 14198bf768fdc958e3c1afd2404e5262208e98d7 |
| 8332 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| 8333 | Date: Tue Nov 28 16:17:18 2006 -0600 |
| 8334 | |
| 8335 | Fix I2C master address initialization. |
| 8336 | |
| 8337 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8338 | |
| 8339 | commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 |
| 8340 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 8341 | Date: Tue Nov 28 23:31:19 2006 -0600 |
| 8342 | |
| 8343 | Assign maintainers for mpc8349emds and mpc8360emds |
| 8344 | |
| 8345 | Dave for mpc8360emds, and me for mpc8349emds. |
| 8346 | |
| 8347 | commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 |
| 8348 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 8349 | Date: Tue Nov 28 23:28:33 2006 -0600 |
| 8350 | |
| 8351 | Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c |
| 8352 | |
| 8353 | give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src |
| 8354 | since they are passed by reference to ucc_get_cmxucr_reg and assigned. |
| 8355 | |
| 8356 | commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 |
| 8357 | Author: Timur Tabi <timur@freescale.com> |
| 8358 | Date: Tue Nov 28 12:09:35 2006 -0600 |
| 8359 | |
| 8360 | mpc83xx: Miscellaneous code style fixes |
| 8361 | |
| 8362 | Implement various code style fixes and similar changes. |
| 8363 | |
| 8364 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8365 | |
Wolfgang Denk | 8d9a861 | 2006-11-30 01:54:07 +0100 | [diff] [blame] | 8366 | commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 |
| 8367 | Author: Stefan Roese <sr@denx.de> |
| 8368 | Date: Tue Nov 28 17:55:49 2006 +0100 |
| 8369 | |
| 8370 | [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. |
| 8371 | |
| 8372 | This patch adds the code and configuration necessary to boot with an |
| 8373 | arch/powerpc Linux kernel. |
| 8374 | |
| 8375 | Signed-off-by: Grant Likely <grant.likely@gmail.com> |
| 8376 | Acked-by: Jon Loeliger <jdl@freescale.com> |
| 8377 | |
| 8378 | commit e732faec95a83cb468b4850ae807c8301dde8f6a |
| 8379 | Author: Stefan Roese <sr@denx.de> |
| 8380 | Date: Tue Nov 28 16:09:24 2006 +0100 |
| 8381 | |
| 8382 | [PATCH] PPC4xx: 440SP Rev. C detection added |
| 8383 | |
| 8384 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8385 | |
| 8386 | commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 |
| 8387 | Author: Stefan Roese <sr@denx.de> |
| 8388 | Date: Tue Nov 28 11:04:45 2006 +0100 |
| 8389 | |
| 8390 | [PATCH] nand: Fix patch merge problem |
| 8391 | |
| 8392 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8393 | |
Wolfgang Denk | 2a8dfe0 | 2007-03-21 23:26:15 +0100 | [diff] [blame] | 8394 | commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 |
| 8395 | Author: Stefan Roese <sr@denx.de> |
| 8396 | Date: Tue Nov 28 11:04:45 2006 +0100 |
| 8397 | |
| 8398 | [PATCH] nand: Fix patch merge problem |
| 8399 | |
| 8400 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8401 | |
Wolfgang Denk | d2c83f5 | 2006-11-27 23:11:18 +0100 | [diff] [blame] | 8402 | commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa |
| 8403 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8404 | Date: Mon Nov 27 22:53:53 2006 +0100 |
| 8405 | |
| 8406 | Update CHANGELOG |
| 8407 | |
Wolfgang Denk | 4f4b602 | 2006-11-27 22:53:53 +0100 | [diff] [blame] | 8408 | commit f6e495f54cdb8fe340b9c03deab40ad746d52fae |
| 8409 | Author: Stefan Roese <sr@denx.de> |
| 8410 | Date: Mon Nov 27 17:43:25 2006 +0100 |
| 8411 | |
| 8412 | [PATCH] 4xx_enet.c: Correct the setting of zmiifer register |
| 8413 | |
| 8414 | Patch below corrects the setting of the zmiifer register, it was |
| 8415 | overwritting the register rather than ORing the settings. |
| 8416 | |
| 8417 | Signed-off-by: Neil Wilson <NWilson@airspan.com> |
| 8418 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8419 | |
| 8420 | commit d1a72545296800b7e219f93104ad5836f0003d66 |
| 8421 | Author: Stefan Roese <sr@denx.de> |
| 8422 | Date: Mon Nov 27 17:34:10 2006 +0100 |
| 8423 | |
| 8424 | [PATCH] Select NAND embedded environment from board configuration |
| 8425 | |
| 8426 | The current NAND Bootloader setup forces the environment |
| 8427 | variables to be in line with the bootloader. This change |
| 8428 | enables the configuration to be made in the board include |
| 8429 | file instead so that it can be individually enabled. |
| 8430 | |
| 8431 | Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| 8432 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8433 | |
| 8434 | commit 15784862857c3c2214498defcfed84ff137fb81e |
| 8435 | Author: Stefan Roese <sr@denx.de> |
| 8436 | Date: Mon Nov 27 17:22:19 2006 +0100 |
| 8437 | |
| 8438 | [PATCH] nand_wait() timeout fixes |
| 8439 | |
| 8440 | Two fixes for the nand_wait() function in |
| 8441 | drivers/nand/nand_base.c: |
| 8442 | |
| 8443 | 1. Use correct timeouts. The original timeouts in Linux |
| 8444 | source are 400ms and 20ms not 40s and 20s |
| 8445 | |
| 8446 | 2. Return correct error value in case of timeout. 0 is |
| 8447 | interpreted as OK. |
| 8448 | |
| 8449 | Signed-off-by: Rui Sousa <rui.sousa@laposte.net> |
| 8450 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8451 | |
| 8452 | commit da5553b095bf04f4f109ad7e565dae3aba47b230 |
| 8453 | Author: Stefan Roese <sr@denx.de> |
| 8454 | Date: Mon Nov 27 17:04:06 2006 +0100 |
| 8455 | |
| 8456 | [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel |
| 8457 | |
| 8458 | This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 |
Wolfgang Denk | f4eb545 | 2007-01-07 00:13:11 +0100 | [diff] [blame] | 8459 | arguments to bootm. It removes the getenv("disable_of") test that used |
Wolfgang Denk | 4f4b602 | 2006-11-27 22:53:53 +0100 | [diff] [blame] | 8460 | to be used for this purpose. |
| 8461 | |
| 8462 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 8463 | Acked-by: Jon Loeliger <jdl@freescale.com> |
| 8464 | |
| 8465 | commit a9398e018593782c5fa7d0741955fc1256b34c1e |
| 8466 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8467 | Date: Mon Nov 27 15:32:42 2006 +0100 |
| 8468 | |
| 8469 | Minor code cleanup. Update CHANGELOG. |
| 8470 | |
Wolfgang Denk | 8d9a861 | 2006-11-30 01:54:07 +0100 | [diff] [blame] | 8471 | commit 1729b92cde575476684bffe819d0b7791b57bff2 |
| 8472 | Author: Stefan Roese <sr@denx.de> |
| 8473 | Date: Mon Nov 27 14:52:04 2006 +0100 |
| 8474 | |
| 8475 | [PATCH] 4xx: Fix problem with board specific reset code (now for real) |
| 8476 | |
| 8477 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8478 | |
| 8479 | commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 |
| 8480 | Author: Stefan Roese <sr@denx.de> |
| 8481 | Date: Mon Nov 27 14:49:51 2006 +0100 |
| 8482 | |
| 8483 | [PATCH] alpr: remove unused board specific flash driver |
| 8484 | |
| 8485 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8486 | |
| 8487 | commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 |
| 8488 | Author: Stefan Roese <sr@denx.de> |
| 8489 | Date: Mon Nov 27 14:48:41 2006 +0100 |
| 8490 | |
| 8491 | [PATCH] 4xx: Fix problem with board specific reset code |
| 8492 | |
| 8493 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8494 | |
| 8495 | commit ec0c2ec725aec9524a177a77ce75559e644a931a |
| 8496 | Author: Stefan Roese <sr@denx.de> |
| 8497 | Date: Mon Nov 27 14:46:06 2006 +0100 |
| 8498 | |
| 8499 | [PATCH] Remove testing 4xx enet PHY setup |
| 8500 | |
| 8501 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8502 | |
| 8503 | commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 |
| 8504 | Author: Stefan Roese <sr@denx.de> |
| 8505 | Date: Mon Nov 27 14:12:17 2006 +0100 |
| 8506 | |
| 8507 | [PATCH] Update Prodrive ALPR board support (440GX) |
| 8508 | |
| 8509 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8510 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 8511 | commit 58b485776698c3d71ec5a215e392123b4c15afa3 |
| 8512 | Author: Markus Klotzbuecher <mk@denx.de> |
| 8513 | Date: Mon Nov 27 11:51:21 2006 +0100 |
| 8514 | |
| 8515 | Add a small README with information on the generic ohci driver. |
| 8516 | |
| 8517 | commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f |
| 8518 | Author: Markus Klotzbuecher <mk@denx.de> |
| 8519 | Date: Mon Nov 27 11:46:46 2006 +0100 |
| 8520 | |
| 8521 | Fix some endianness issues related to the generic ohci driver |
| 8522 | |
| 8523 | commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 |
| 8524 | Author: Markus Klotzbuecher <mk@denx.de> |
| 8525 | Date: Mon Nov 27 11:44:58 2006 +0100 |
| 8526 | |
| 8527 | Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able |
| 8528 | to choose between the old and the generic OHCI drivers. |
| 8529 | |
| 8530 | commit 53e336e9ffc51035bdc4e5867631b3378761b4df |
| 8531 | Author: Markus Klotzbuecher <mk@denx.de> |
| 8532 | Date: Mon Nov 27 11:43:09 2006 +0100 |
| 8533 | |
| 8534 | Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver |
| 8535 | and adapted board configs TQM5200 and yosemite accordingly. This commit |
| 8536 | also makes the maximum number of root hub ports configurable |
| 8537 | (CFG_USB_OHCI_MAX_ROOT_PORTS). |
| 8538 | |
Wolfgang Denk | a9398e0 | 2006-11-27 15:32:42 +0100 | [diff] [blame] | 8539 | commit 78d620ebb5871d252270dedfad60c6568993b780 |
| 8540 | Author: Wolfgang Denk <wd@atlas.denx.de> |
| 8541 | Date: Thu Nov 23 22:58:58 2006 +0100 |
| 8542 | |
| 8543 | Updates for TQM5200 modules: |
| 8544 | - fix off-by-one error in board/tqm5200/cam5200_flash.c error message |
| 8545 | - simplify "udate" definitions |
| 8546 | |
| 8547 | commit 2053283304eeddf250d109e6791eb6fa4cad14f7 |
| 8548 | Author: Stefan Roese <sr@denx.de> |
| 8549 | Date: Wed Nov 22 13:20:50 2006 +0100 |
| 8550 | |
| 8551 | [PATCH] PPC4xx start.S: Fix for processor errata |
| 8552 | |
| 8553 | Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx |
| 8554 | errata 1.12: 440_33 by moving patch up in code. |
| 8555 | |
| 8556 | Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| 8557 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8558 | |
| 8559 | commit 4ef6251403f637841000e0fef9e832aa01339822 |
| 8560 | Author: Stefan Roese <sr@denx.de> |
| 8561 | Date: Mon Nov 20 20:39:52 2006 +0100 |
| 8562 | |
| 8563 | [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH |
| 8564 | |
| 8565 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8566 | |
| 8567 | commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 |
| 8568 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8569 | Date: Mon Nov 20 10:28:30 2006 +0100 |
| 8570 | |
| 8571 | Update CHANGELOG |
| 8572 | |
Wolfgang Denk | e4bbd8d | 2006-11-20 10:28:30 +0100 | [diff] [blame] | 8573 | commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| 8574 | Author: Stefan Roese <sr@denx.de> |
| 8575 | Date: Mon Nov 13 13:55:24 2006 +0100 |
| 8576 | |
| 8577 | [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] |
| 8578 | |
| 8579 | * Adds support for AMD command set Top Boot flash geometry reversal |
| 8580 | * Adds support for reading JEDEC Manufacturer ID and Device ID |
| 8581 | * Adds support for displaying command set, manufacturer id and |
| 8582 | device ids (flinfo) |
| 8583 | * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined |
| 8584 | * Removes outdated change history (refer to git log instead) |
| 8585 | |
| 8586 | Signed-off-by: Tolunay Orkun <listmember@orkun.us> |
| 8587 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 8588 | |
| 8589 | commit b21b511d4c50408f4853f46f06b601272196223f |
| 8590 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8591 | Date: Sun Nov 12 21:13:23 2006 +0100 |
| 8592 | |
| 8593 | Update CHANGELOG |
| 8594 | |
Wolfgang Denk | b21b511 | 2006-11-12 21:13:23 +0100 | [diff] [blame] | 8595 | commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| 8596 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 8597 | Date: Sat Nov 11 22:48:22 2006 +0100 |
| 8598 | |
| 8599 | Disable the watchdog in the default config for the V38B board. |
| 8600 | |
| 8601 | commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a |
| 8602 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 8603 | Date: Sat Nov 11 22:43:00 2006 +0100 |
| 8604 | |
| 8605 | Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin |
| 8606 | group is enabled for USB earlier (in cpu_init_f() instead of |
| 8607 | usb_lowlevel_init()). |
| 8608 | |
| 8609 | commit 91650b3e4de688038d4f71279c44858e3e2c6870 |
| 8610 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 8611 | Date: Mon Nov 6 17:06:36 2006 +0100 |
| 8612 | |
| 8613 | Sequential accesses to non-existent memory must be synchronized, |
| 8614 | at least on G2 cores. |
| 8615 | |
| 8616 | This fixes get_ram_size() problems on MPC5200 Rev. B boards. |
| 8617 | |
Wolfgang Denk | dd520bf | 2006-11-30 18:02:20 +0100 | [diff] [blame] | 8618 | commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa |
| 8619 | Author: Timur Tabi <timur@freescale.com> |
| 8620 | Date: Fri Nov 3 19:15:00 2006 -0600 |
| 8621 | |
| 8622 | mpc83xx: Update 83xx to use fsl_i2c.c |
| 8623 | |
| 8624 | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete |
| 8625 | cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. |
| 8626 | Added multiple I2C bus support to fsl_i2c.c. |
| 8627 | |
| 8628 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8629 | |
| 8630 | commit d239d74b1c937984bc519083a8e7de373a390f06 |
| 8631 | Author: Timur Tabi <timur@freescale.com> |
| 8632 | Date: Fri Nov 3 12:00:28 2006 -0600 |
| 8633 | |
| 8634 | mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR |
| 8635 | |
| 8636 | Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx |
| 8637 | tree matches the other 8xxx trees. |
| 8638 | |
| 8639 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8640 | |
| 8641 | commit f7fb2e703ec9688541416962724adff70a7322cb |
| 8642 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 8643 | Date: Thu Nov 2 19:47:11 2006 -0600 |
| 8644 | |
| 8645 | mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c |
| 8646 | |
| 8647 | commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 |
| 8648 | Author: Dave Liu <daveliu@freescale.com> |
| 8649 | Date: Thu Nov 2 18:05:50 2006 -0600 |
| 8650 | |
| 8651 | mpc83xx: Fix the incorrect dcbz operation |
| 8652 | |
| 8653 | The 834x rev1.x silicon has one CPU5 errata. |
| 8654 | |
| 8655 | The issue is when the data cache locked with |
| 8656 | HID0[DLOCK], the dcbz instruction looks like no-op inst. |
| 8657 | |
| 8658 | The right behavior of the data cache is when the data cache |
| 8659 | Locked with HID0[DLOCK], the dcbz instruction allocates |
| 8660 | new tags in cache. |
| 8661 | |
| 8662 | The 834x rev3.0 and later and 8360 have not this bug inside. |
| 8663 | |
| 8664 | So, when 834x rev3.0/8360 are working with ECC, the dcbz |
| 8665 | instruction will corrupt the stack in cache, the processor will |
| 8666 | checkstop reset. |
| 8667 | |
| 8668 | However, the 834x rev1.x can work with ECC with these code, |
| 8669 | because the sillicon has this cache bug. The dcbz will not |
| 8670 | corrupt the stack in cache. |
| 8671 | Really, it is the fault code running on fault sillicon. |
| 8672 | |
| 8673 | This patch fix the incorrect dcbz operation. Instead of |
| 8674 | CPU FP writing to initialise the ECC. |
| 8675 | |
| 8676 | CHANGELOG: |
| 8677 | * Fix the incorrect dcbz operation instead of CPU FP |
| 8678 | writing to initialise the ECC memory. Otherwise, it |
| 8679 | will corrupt the stack in cache, The processor will checkstop |
| 8680 | reset. |
| 8681 | |
| 8682 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 8683 | |
| 8684 | commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d |
| 8685 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 8686 | Date: Wed Nov 1 00:10:40 2006 -0600 |
| 8687 | |
| 8688 | mpc83xx: add OF_FLAT_TREE bits to 83xx boards |
| 8689 | |
| 8690 | add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and |
| 8691 | STDOUT_PATH configuration bits to mpc8349emds, |
| 8692 | mpc8349itx, and mpc8360emds board code. |
| 8693 | |
| 8694 | redo environment to use bootm with the fdtaddr |
| 8695 | for booting ARCH=powerpc kernels by default, |
| 8696 | and provide default fdtaddr values. |
| 8697 | |
| 8698 | commit 48041365b3420589ad464ebc7752e0053538b729 |
| 8699 | Author: Kim Phillips <kim.phillips@freescale.com> |
| 8700 | Date: Wed Nov 1 00:07:25 2006 -0600 |
| 8701 | |
| 8702 | mpc83xx: change ft code to modify local-mac-address property |
| 8703 | |
| 8704 | Update 83xx OF code to update local-mac-address properties |
| 8705 | for ethernet instead of the obsolete 'address' property. |
| 8706 | |
| 8707 | commit 9ca880a250870a7d55754291b5591d2b5fe89b54 |
| 8708 | Author: Timur Tabi <timur@freescale.com> |
| 8709 | Date: Tue Oct 31 21:23:16 2006 -0600 |
| 8710 | |
| 8711 | mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS |
| 8712 | |
| 8713 | This patch also adds an improved I2C set_speed(), which handles all clock |
| 8714 | frequencies. |
| 8715 | |
| 8716 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8717 | |
| 8718 | commit ac4b5622ce050b5ee1e154b98df630d778661632 |
| 8719 | Author: Dave Liu <daveliu@freescale.com> |
| 8720 | Date: Tue Oct 31 19:54:59 2006 -0600 |
| 8721 | |
| 8722 | mpc83xx: add the README.mpc8360emds |
| 8723 | |
| 8724 | add doc/README.mpc8360emds to accompany the new board support |
| 8725 | |
| 8726 | commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef |
| 8727 | Author: Dave Liu <daveliu@freescale.com> |
| 8728 | Date: Fri Nov 3 12:11:15 2006 -0600 |
| 8729 | |
| 8730 | mpc83xx: add QE ethernet support |
| 8731 | |
| 8732 | this patch adds support for the QUICC Engine based UCC gigabit ethernet device. |
| 8733 | |
| 8734 | commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 |
| 8735 | Author: Dave Liu <daveliu@freescale.com> |
| 8736 | Date: Fri Nov 3 19:33:44 2006 -0600 |
| 8737 | |
| 8738 | mpc83xx: Add MPC8360EMDS basic board support |
| 8739 | |
| 8740 | Add support for the Freescale MPC8360EMDS board. |
| 8741 | Includes DDR, DUART, Local Bus, PCI. |
| 8742 | |
| 8743 | commit 23892e49352de74f7fac36ff90bb1be143d195e3 |
| 8744 | Author: Dave Liu <daveliu@freescale.com> |
| 8745 | Date: Tue Oct 31 19:30:40 2006 -0600 |
| 8746 | |
| 8747 | mpc83xx: add the QUICC Engine (QE) immap file |
| 8748 | |
| 8749 | common QE immap file. Also required for 8360. |
| 8750 | |
| 8751 | commit b701652a4992bdcc62fb1a6038a85beef9e55da4 |
| 8752 | Author: Dave Liu <daveliu@freescale.com> |
| 8753 | Date: Tue Oct 31 19:25:38 2006 -0600 |
| 8754 | |
| 8755 | mpc83xx: Add 8360 specifics to 83xx immap |
| 8756 | |
| 8757 | Mainly add QE device dependencies, with appropriate 8360 protection. |
| 8758 | Lindent also run. |
| 8759 | |
| 8760 | commit 988833324a7fda482c8ac3ca23eb539f8232e404 |
| 8761 | Author: Timur Tabi <timur@freescale.com> |
| 8762 | Date: Tue Oct 31 19:14:41 2006 -0600 |
| 8763 | |
| 8764 | mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX |
| 8765 | |
| 8766 | PREREQUISITE PATCHES: |
| 8767 | |
| 8768 | * This patch can only be applied after the following patches have been applied: |
| 8769 | |
| 8770 | 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" |
| 8771 | 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" |
| 8772 | |
| 8773 | CHANGELOG: |
| 8774 | |
| 8775 | * For the 8349E-mITX, fix some size values in pci_init_board(), enable |
| 8776 | the clock for the 2nd USB board (Linux kernel will hang otherwise), |
| 8777 | and fix the CONFIG_BOOTARGS macro. |
| 8778 | |
| 8779 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8780 | |
| 8781 | commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 |
| 8782 | Author: Timur Tabi <timur@freescale.com> |
| 8783 | Date: Tue Oct 31 18:44:42 2006 -0600 |
| 8784 | |
| 8785 | mpc83xx: Add support for the MPC8349E-mITX |
| 8786 | |
| 8787 | PREREQUISITE PATCHES: |
| 8788 | |
| 8789 | * This patch can only be applied after the following patches have been applied: |
| 8790 | |
| 8791 | 1) DNX#2006090742000024 "Add support for multiple I2C buses" |
| 8792 | 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" |
| 8793 | 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" |
| 8794 | 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" |
| 8795 | 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" |
| 8796 | |
| 8797 | CHANGELOG: |
| 8798 | |
| 8799 | * Add support for the Freescale MPC8349E-mITX reference design platform. |
| 8800 | The second TSEC (Vitesse 7385 switch) is not supported at this time. |
| 8801 | |
| 8802 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8803 | |
| 8804 | commit 183da6d9b446cc12123455844ad1187e2375626f |
| 8805 | Author: Ben Warren <bwarren@qstreams.com> |
| 8806 | Date: Tue Sep 12 10:15:53 2006 -0400 |
| 8807 | |
| 8808 | Additional MPC8349 support for multibus i2c |
| 8809 | |
| 8810 | Hello, |
| 8811 | |
| 8812 | Here is a patch for a file that was accidentally left out of a previous |
| 8813 | attempt. |
| 8814 | |
| 8815 | It accompanies the patch with ticket DNX#2006090742000024 |
| 8816 | |
| 8817 | CHANGELOG: |
| 8818 | Change PCI initialization to use new multi-bus I2C API. |
| 8819 | |
| 8820 | regards, |
| 8821 | Ben |
| 8822 | |
| 8823 | commit b24f119d672b709d153ff2ac091d4aa63ec6877d |
| 8824 | Author: Ben Warren <bwarren@qstreams.com> |
| 8825 | Date: Thu Sep 7 16:51:04 2006 -0400 |
| 8826 | |
| 8827 | Multi-bus I2C implementation of MPC834x |
| 8828 | |
| 8829 | Hello, |
| 8830 | |
| 8831 | Attached is a patch implementing multiple I2C buses on the MPC834x CPU |
| 8832 | family and the MPC8349EMDS board in particular. |
| 8833 | This patch requires Patch 1 (Add support for multiple I2C buses). |
| 8834 | Testing was performed on a 533MHz board. |
| 8835 | |
| 8836 | /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ |
| 8837 | |
| 8838 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 8839 | |
| 8840 | CHANGELOG: |
| 8841 | Implemented driver-level code to support two I2C buses on the |
| 8842 | MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds |
| 8843 | are 50kHz, 100kHz and 400kHz on each bus. |
| 8844 | |
| 8845 | regards, |
| 8846 | Ben |
| 8847 | |
| 8848 | commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae |
| 8849 | Author: Ben Warren <bwarren@qstreams.com> |
| 8850 | Date: Thu Sep 7 16:50:54 2006 -0400 |
| 8851 | |
| 8852 | Add support for multiple I2C buses |
| 8853 | |
| 8854 | Hello, |
| 8855 | |
| 8856 | Attached is a patch providing support for multiple I2C buses at the |
| 8857 | command level. The second part of the patch includes an implementation |
| 8858 | for the MPC834x CPU and MPC8349EMDS board. |
| 8859 | |
| 8860 | /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ |
| 8861 | |
| 8862 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 8863 | |
| 8864 | Overview: |
| 8865 | |
| 8866 | 1. Include new 'i2c' command (based on USB implementation) using |
| 8867 | CONFIG_I2C_CMD_TREE. |
| 8868 | |
| 8869 | 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that |
| 8870 | the commands to change bus number and speed are only available under the |
| 8871 | new 'i2c' command mentioned in the first bullet. |
| 8872 | |
| 8873 | 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus |
| 8874 | systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form |
| 8875 | of an array of bus-device pairs. Otherwise, it is an array of uchar. |
| 8876 | |
| 8877 | CHANGELOG: |
| 8878 | Added new 'i2c' master command for all I2C interaction. This is |
| 8879 | conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for |
| 8880 | setting I2C bus speed as well as changing the active bus if the board |
| 8881 | has more than one (conditionally compiled with |
| 8882 | CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. |
| 8883 | Updated README. |
| 8884 | |
| 8885 | regards, |
| 8886 | Ben |
| 8887 | |
| 8888 | commit bed85caf872714ebf53013967a695c9d63acfc68 |
| 8889 | Author: Timur Tabi <timur@freescale.com> |
| 8890 | Date: Tue Oct 31 18:13:36 2006 -0600 |
| 8891 | |
| 8892 | mpc83xx: Add support for Errata DDR6 on MPC 834x systems |
| 8893 | |
| 8894 | CHANGELOG: |
| 8895 | |
| 8896 | * Errata DDR6, which affects all current MPC 834x processors, lists changes |
| 8897 | required to maintain compatibility with various types of DDR memory. This |
| 8898 | patch implements those changes. |
| 8899 | |
| 8900 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8901 | |
| 8902 | commit afd6e470f639883002c7c59d562690a5cb0f4865 |
| 8903 | Author: Timur Tabi <timur@freescale.com> |
| 8904 | Date: Wed Oct 25 18:45:23 2006 -0500 |
| 8905 | |
| 8906 | mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it |
| 8907 | |
| 8908 | commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a |
| 8909 | Author: Timur Tabi <timur@freescale.com> |
| 8910 | Date: Tue Aug 22 17:07:00 2006 -0500 |
| 8911 | |
| 8912 | mpc83xx: Add support for variable flash memory sizes on 83xx systems |
| 8913 | |
| 8914 | CHANGELOG: |
| 8915 | |
| 8916 | * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access |
| 8917 | window registers, instead of using a hard-coded value of 8MB. |
| 8918 | |
| 8919 | Signed-off-by: Timur Tabi <timur@freescale.com> |
| 8920 | |
| 8921 | commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 |
| 8922 | Author: Tanya Jiang <tanya.jiang@freescale.com> |
| 8923 | Date: Thu Aug 3 18:38:13 2006 +0800 |
| 8924 | |
| 8925 | mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros |
| 8926 | |
| 8927 | Unified TQM834x variable names with 83xx and consolidated macro |
| 8928 | in preparation for the 8360 and other upcoming 83xx devices. |
| 8929 | |
| 8930 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| 8931 | |
| 8932 | commit f6eda7f80ccc13d658020268c507d7173cf2e8aa |
| 8933 | Author: Dave Liu <daveliu@freescale.com> |
| 8934 | Date: Wed Oct 25 14:41:21 2006 -0500 |
| 8935 | |
| 8936 | mpc83xx: Changed to unified mpx83xx names and added common 83xx changes |
| 8937 | |
| 8938 | Incorporated the common unified variable names and the changes in preparation |
| 8939 | for releasing mpc8360 patches. |
| 8940 | |
| 8941 | Signed-off-by: Dave Liu <daveliu@freescale.com> |
| 8942 | |
| 8943 | commit 3894c46c27c64891f93ac04edde86a9fa9758d92 |
| 8944 | Author: Tanya Jiang <tanya.jiang@freescale.com> |
| 8945 | Date: Thu Aug 3 18:36:02 2006 +0800 |
| 8946 | |
| 8947 | mpc83xx: Fix missing build for mpc8349emds pci.c |
| 8948 | |
| 8949 | Make pci build for mpc8349emds |
| 8950 | |
| 8951 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| 8952 | |
| 8953 | commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 |
| 8954 | Author: Tanya Jiang <tanya.jiang@freescale.com> |
| 8955 | Date: Thu Aug 3 18:39:49 2006 +0800 |
| 8956 | |
| 8957 | mpc83xx: Removed unused file resetvec.S for mpc83xx cpu |
| 8958 | |
| 8959 | Removed unused file resetvec.S for mpc83xx cpu |
| 8960 | |
| 8961 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| 8962 | |
| 8963 | commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf |
| 8964 | Author: Nick Spence <Nick.Spence@freescale.com> |
| 8965 | Date: Sat Sep 30 00:32:59 2006 -0700 |
| 8966 | |
| 8967 | NAND Flash verify across block boundaries |
| 8968 | |
| 8969 | This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is |
| 8970 | defined |
| 8971 | and the write crosses a block boundary. The pointer to the verification |
| 8972 | buffer (bufstart) is not being updated to reflect the starting of the |
| 8973 | new |
| 8974 | block so the verification of the second block fails. |
| 8975 | |
| 8976 | CHANGELOG: |
| 8977 | |
| 8978 | * Fix NAND FLASH page verification across block boundaries |
| 8979 | |
| 8980 | commit f484dc791a3932537213c43c654cc1295c64b84c |
| 8981 | Author: Nick Spence <nick.spence@freescale.com> |
| 8982 | Date: Thu Sep 7 07:39:46 2006 -0700 |
| 8983 | |
| 8984 | Added RGMII support to the TSECs and Marvell 881111 Phy |
| 8985 | |
| 8986 | Added a phy initialization to adjust the RGMII RX and TX timing |
| 8987 | Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode |
| 8988 | |
| 8989 | Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| 8990 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 8991 | commit 4831c8b8a97799da77923d6bbb4c260c0d45521c |
| 8992 | Author: roy zang <tie-fei.zang@freescale.com> |
| 8993 | Date: Fri Nov 3 13:10:00 2006 +0800 |
| 8994 | |
| 8995 | Remove some unused CFG define. |
| 8996 | undef CFG_DRAM_TEST |
| 8997 | |
| 8998 | commit 99c09c4dec34f77c243bf51bea532e3f339410ad |
| 8999 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9000 | Date: Fri Nov 3 13:07:36 2006 +0800 |
| 9001 | |
| 9002 | Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. |
| 9003 | Both work. 0xFF000000 seems more reasonable. |
| 9004 | |
Wolfgang Denk | b21b511 | 2006-11-12 21:13:23 +0100 | [diff] [blame] | 9005 | commit c59200443072353044aa4bf737a5a60f9a9af231 |
| 9006 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9007 | Date: Thu Nov 2 15:15:01 2006 +0100 |
| 9008 | |
| 9009 | Release U-Boot 1.1.6 |
| 9010 | |
Wolfgang Denk | 2a26ec4 | 2007-04-18 17:07:26 +0200 | [diff] [blame] | 9011 | commit c1fbe4103a0d6c8957f912af902d705ba67836f2 |
| 9012 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9013 | Date: Thu Nov 2 19:14:48 2006 +0800 |
| 9014 | |
| 9015 | This patch comes from Yuli's posted patch on 8/8/2006 |
| 9016 | titled "CFI Driver Little-Endian write Issue". |
| 9017 | |
| 9018 | http://sourceforge.net/mailarchive/message.php?msg_id=36311999 |
| 9019 | |
| 9020 | If that patch applied, please discard this one. |
| 9021 | Until now , I do not see his patch is applied. So please apply this one. |
| 9022 | |
| 9023 | Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> |
| 9024 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9025 | |
| 9026 | commit b825f158e449e1e9cf74c08e572955e122394c96 |
| 9027 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9028 | Date: Thu Nov 2 19:12:31 2006 +0800 |
| 9029 | |
| 9030 | Tsi108 on chip i2c support. |
| 9031 | |
| 9032 | The i2c Interface provides a master-only, serial interface that can be |
| 9033 | used for initializing Tsi108/Tsi109 registers from an EEPROM after a |
| 9034 | device reset. |
| 9035 | |
| 9036 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9037 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9038 | |
| 9039 | commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 |
| 9040 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9041 | Date: Thu Nov 2 19:11:06 2006 +0800 |
| 9042 | |
| 9043 | Tsi108 on chip pci controller support. |
| 9044 | |
| 9045 | If there is no pci card, the tsi108/109 pci configure read will |
| 9046 | cause a machine check exception to the processor. PCI error should |
| 9047 | also be cleared after the read. |
| 9048 | |
| 9049 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9050 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9051 | |
| 9052 | commit d1927cee977126e547ceeba23e4f978f377cfb8f |
| 9053 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9054 | Date: Thu Nov 2 19:08:55 2006 +0800 |
| 9055 | |
| 9056 | Tundra tsi108 on chip Ethernet controller support. |
| 9057 | |
| 9058 | The following is a brief description of the Ethernet controller: |
| 9059 | The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent |
| 9060 | Gigabit Ethernet ports,E0 and E1. It uses a single Management interface |
| 9061 | to manage the two physical connection devices (PHYs). Each Ethernet port |
| 9062 | has its own statistics monitor that tracks and reports key interface |
| 9063 | statistics. Each port supports a 256-entry hash table for address |
| 9064 | filtering. In addition, each port is bridged to the Switch Fabric |
| 9065 | through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. |
| 9066 | |
| 9067 | Each Ethernet port also has a pair of internal Ethernet DMA channels to |
| 9068 | support the transmit and receive data flows. The Ethernet DMA channels |
| 9069 | use descriptors set up in memory, the memory map of the device, and |
| 9070 | access via the Switch Fabric. The Ethernet Controller?s DMA arbiter |
| 9071 | handles arbitration for the Switch Fabric. The Controller also |
| 9072 | has a register businterface for register accesses and status monitor |
| 9073 | control. |
| 9074 | |
| 9075 | The PMD (Physical Media Device) interface operates in MII, GMII, or TBI |
| 9076 | modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. |
| 9077 | The GMII and TBI modes are used to connect with Gigabit PMDs. Internal |
| 9078 | data flows to and from the Ethernet Controller through the Switch Fabric. |
| 9079 | |
| 9080 | Each Ethernet port uses its transmit and receive DMA channels to manage |
| 9081 | data flows through buffer descriptors that are predefined by the |
| 9082 | system (the descriptors can exist anywhere in the system memory map). |
| 9083 | These descriptors are data structures that point to buffers filled |
| 9084 | with data ready to transmit over Ethernet, or they point to empty |
| 9085 | buffers ready to receive data from Ethernet. |
| 9086 | |
| 9087 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9088 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9089 | |
| 9090 | commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e |
| 9091 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9092 | Date: Thu Nov 2 19:01:33 2006 +0800 |
| 9093 | |
| 9094 | Tundra tsi108 header file. |
| 9095 | |
| 9096 | The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for |
| 9097 | PowerPC processors that offers numerous system interconnect options for |
| 9098 | embedded application designers. The Tsi108 can interconnect 60x or |
| 9099 | MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, |
| 9100 | and Flash. Provided the macro define for tsi108 chip. |
| 9101 | |
| 9102 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9103 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9104 | |
| 9105 | commit 87c4db09699c6b89176b31004afcb83eb1585d47 |
| 9106 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9107 | Date: Thu Nov 2 18:59:15 2006 +0800 |
| 9108 | |
| 9109 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| 9110 | mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. |
| 9111 | |
| 9112 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9113 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9114 | |
| 9115 | commit 27801b8ab11c61b577e45742a515bb3b23b80241 |
| 9116 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9117 | Date: Thu Nov 2 18:57:21 2006 +0800 |
| 9118 | |
| 9119 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| 9120 | Make ,config.mk and link file for the mpc7448hpc2 board. |
| 9121 | |
| 9122 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9123 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9124 | |
| 9125 | commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 |
| 9126 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9127 | Date: Thu Nov 2 18:55:04 2006 +0800 |
| 9128 | |
| 9129 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| 9130 | The mpc7448hpc2 board support header file. |
| 9131 | |
| 9132 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9133 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9134 | |
| 9135 | commit 625bb5ddb50b243f931262ca8c46956409471917 |
| 9136 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9137 | Date: Thu Nov 2 18:52:21 2006 +0800 |
| 9138 | |
| 9139 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| 9140 | The mpc7448hpc2 board support low level assemble language init code. |
| 9141 | |
| 9142 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9143 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9144 | |
| 9145 | commit 4c52783b3d024e153c4972b97332e314bc3bdc46 |
| 9146 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9147 | Date: Thu Nov 2 18:49:51 2006 +0800 |
| 9148 | |
| 9149 | General code modification for mpc7448hpc2 board support. |
| 9150 | 1. Add 7447A and 7448 processor support. |
| 9151 | 2. Add the following flags. |
| 9152 | |
| 9153 | CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically |
| 9154 | (such as by switch on board), this flag should be set. |
| 9155 | |
| 9156 | CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot |
| 9157 | relocates to RAM, this flag should be set. |
| 9158 | |
| 9159 | CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the |
| 9160 | system hang in exception, this flag should be set. |
| 9161 | |
| 9162 | There is a design issue for tsi108/109 pci configure read. When pci scan |
| 9163 | the slots, if there is no pci card, the tsi108/9 will cause a machine |
| 9164 | check exception for mpc7448 processor. |
| 9165 | |
| 9166 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| 9167 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9168 | |
| 9169 | commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 |
| 9170 | Author: roy zang <tie-fei.zang@freescale.com> |
| 9171 | Date: Thu Nov 2 18:34:47 2006 +0800 |
| 9172 | |
| 9173 | Add README file for mpc7448hpc2 board. |
| 9174 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| 9175 | |
Wolfgang Denk | b21b511 | 2006-11-12 21:13:23 +0100 | [diff] [blame] | 9176 | commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| 9177 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 9178 | Date: Wed Nov 1 02:04:38 2006 +0100 |
| 9179 | |
| 9180 | Finish up support for MarelV38B board |
| 9181 | - add watchdog support |
| 9182 | - enable GPIO_WKUP_7 pin for input |
| 9183 | - code cleanup |
| 9184 | |
| 9185 | commit ffa150bc90c943ca265170bd1be3f293674dd5c7 |
| 9186 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 9187 | Date: Wed Nov 1 01:45:46 2006 +0100 |
| 9188 | |
| 9189 | - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: |
| 9190 | * remove warnings when compiling ethaddr.c |
| 9191 | * adjust linker script (fixes a crash resulting from incorrect |
| 9192 | definition of __u_boot_cmd_start) |
| 9193 | - Some MarelV38B code cleanup. |
| 9194 | |
| 9195 | commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 |
| 9196 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 9197 | Date: Wed Nov 1 01:38:16 2006 +0100 |
| 9198 | |
| 9199 | - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the |
| 9200 | MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's |
| 9201 | Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with |
| 9202 | MPC5XXX_WU_GPIO_DATA_O for affected boards. |
| 9203 | |
| 9204 | - Add defintions for some MPC5XXX GPIO pins. |
| 9205 | |
| 9206 | commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 |
| 9207 | Author: Bartlomiej Sieka <tur@semihalf.com> |
| 9208 | Date: Wed Nov 1 01:34:29 2006 +0100 |
| 9209 | |
| 9210 | Changed MarelV38B board make target to lowercase. Config file cleanup. |
| 9211 | |
Wolfgang Denk | c592004 | 2006-11-02 15:15:01 +0100 | [diff] [blame] | 9212 | commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| 9213 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9214 | Date: Sun Oct 29 01:03:51 2006 +0200 |
| 9215 | |
| 9216 | Automatically adjust ARFLAGS so "make -s" is really silent. |
| 9217 | |
| 9218 | commit fae684e89844856383bdf101440889557df3e6b1 |
| 9219 | Author: Stefan Roese <sr@denx.de> |
| 9220 | Date: Sat Oct 28 16:45:00 2006 +0200 |
| 9221 | |
| 9222 | [PATCH] omap925.c: Remove unused functions |
| 9223 | |
| 9224 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 9225 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 9226 | |
| 9227 | commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 |
| 9228 | Author: Stefan Roese <sr@denx.de> |
| 9229 | Date: Sat Oct 28 17:12:58 2006 +0200 |
| 9230 | |
| 9231 | [PATCH] Add some missing machtypes for netstar & voiceblue boards |
| 9232 | |
| 9233 | Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of |
| 9234 | numbers in code. |
| 9235 | |
| 9236 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 9237 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 9238 | |
| 9239 | commit 856f054410cef52d868feb330168b2a4c4091328 |
| 9240 | Author: Stefan Roese <sr@denx.de> |
| 9241 | Date: Sat Oct 28 15:55:52 2006 +0200 |
| 9242 | |
| 9243 | [PATCH] NAND: Partition name support added to NAND subsystem |
| 9244 | |
| 9245 | chpart, nboot and NAND subsystem related commands now accept also partition |
| 9246 | name to specify offset. |
| 9247 | |
| 9248 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| 9249 | Signed-off-by: Stefan Roese <sr@denx.de> |
| 9250 | |
| 9251 | commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 |
| 9252 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9253 | Date: Sat Oct 28 02:29:44 2006 +0200 |
| 9254 | |
| 9255 | Update CHANGELOG. |
| 9256 | |
Wolfgang Denk | 07a69a1 | 2006-10-28 02:29:44 +0200 | [diff] [blame] | 9257 | commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| 9258 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9259 | Date: Sat Oct 28 02:29:14 2006 +0200 |
| 9260 | |
| 9261 | Enable commandline editing and hush shell on all TQM boards. |
| 9262 | |
| 9263 | commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 |
| 9264 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9265 | Date: Sat Oct 28 02:28:02 2006 +0200 |
| 9266 | |
| 9267 | README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE |
| 9268 | |
| 9269 | commit 471a7be7a042e95e440f5de969c9765214ae8d6e |
| 9270 | Author: Wolfgang Denk <wd@denx.de> |
| 9271 | Date: Sat Oct 28 01:14:32 2006 +0200 |
| 9272 | |
| 9273 | Check for illegal character '=' in environment variable names. |
| 9274 | |
| 9275 | Make sure the string passed as variable name does not contain a '=' |
| 9276 | character. This not only prevents the common error or typing |
| 9277 | "setenv foo=bar" instead of "setenv foo bar", but (more importantly) |
| 9278 | also closes a backdoor which allowed to delete write-protected |
| 9279 | environment variables, for example by using "setenv ethaddr=". |
| 9280 | |
| 9281 | commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 |
| 9282 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9283 | Date: Sat Oct 28 00:38:39 2006 +0200 |
| 9284 | |
| 9285 | Minor code cleanup. |
| 9286 | |
| 9287 | commit e11887a77d81077416a2d1c5e0354916fee8c034 |
| 9288 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 9289 | Date: Thu Oct 26 17:55:31 2006 +0200 |
| 9290 | |
| 9291 | Don't pass any debug options directly to the assembler |
| 9292 | |
| 9293 | When passing the -g option to gcc, gcc automatically selects a |
| 9294 | suitable --g<format> option to pass on to the assembler. |
| 9295 | Thus, there's no point in forcing a specific debug option on the |
| 9296 | assembler using the -Wa mechanism. |
| 9297 | |
| 9298 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 9299 | |
| 9300 | commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 |
| 9301 | Author: Jon Loeliger <jdl@freescale.com> |
| 9302 | Date: Fri Oct 27 07:47:22 2006 -0500 |
| 9303 | |
| 9304 | MPC86xx: Cleaned up unused and conditionally used local variables. |
| 9305 | |
| 9306 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9307 | |
| 9308 | commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 |
| 9309 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9310 | Date: Fri Oct 27 11:55:21 2006 +0200 |
| 9311 | |
| 9312 | Fix "ar" flags in some Makefiles to allow for silent "make -s" |
| 9313 | |
| 9314 | commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f |
| 9315 | Author: Ben Warren <bwarren@qstreams.com> |
| 9316 | Date: Thu Oct 26 14:38:25 2006 -0400 |
| 9317 | |
| 9318 | Fix TSEC driver (now for real): avoid crashes if PHY is not attached |
| 9319 | to a TSEC (e.g. a switch is connected via RMII) or |
| 9320 | if the PHY is defective/incorrectly configured. |
| 9321 | |
| 9322 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 9323 | |
| 9324 | commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 |
| 9325 | Author: Ben Warren <bwarren@qstreams.com> |
| 9326 | Date: Thu Oct 26 14:38:25 2006 -0400 |
| 9327 | |
| 9328 | Fix TSEC driver: avoid crashes if PHY is not attached |
| 9329 | to a TSEC (e.g. a switch is connected via RMII) or |
| 9330 | if the PHY is defective/incorrectly configured. |
| 9331 | |
| 9332 | Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| 9333 | |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9334 | commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| 9335 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 9336 | Date: Thu Oct 26 16:24:31 2006 +0200 |
| 9337 | |
| 9338 | Code cleanup. |
| 9339 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9340 | commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| 9341 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 9342 | Date: Wed Oct 25 15:48:59 2006 +0200 |
| 9343 | |
| 9344 | Finish up support for the ATSTK1000/ATSTK1002 boards |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9345 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9346 | Add atstk1002_config target to Makefile and move the AVR32 section |
| 9347 | down below Blackfin so that it doesn't end up in the middle of |
| 9348 | MIPS. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9349 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9350 | Drop the autogenerated linker script thing for now. Will have to |
| 9351 | revisit how to handle chips with different flash and RAM layout |
| 9352 | later. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9353 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9354 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 9355 | |
| 9356 | commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 |
| 9357 | Author: Kumar Gala <galak@kernel.crashing.org> |
| 9358 | Date: Tue Oct 24 23:47:37 2006 -0500 |
| 9359 | |
| 9360 | Added support for Multi-Image files that contain a device tree |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9361 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9362 | If a Multi-Image file contains a third image we try to use it as a |
| 9363 | device tree. The device tree image is assumed to be uncompressed in the |
Wolfgang Denk | f4eb545 | 2007-01-07 00:13:11 +0100 | [diff] [blame] | 9364 | image file. We automatically allocate space for the device tree in memory |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9365 | and provide an 8k pad to allow more than a reasonable amount of growth. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9366 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9367 | Additionally, a device tree that was contained in flash will now automatically |
| 9368 | get copied to system memory as part of boot. Previously an error was |
| 9369 | reported if one tried to boot a device tree that was in flash. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9370 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9371 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 9372 | |
Wolfgang Denk | 4e53a25 | 2006-10-25 00:43:17 +0200 | [diff] [blame] | 9373 | commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| 9374 | Author: Wolfgang Denk <wd@denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9375 | Date: Tue Oct 24 21:35:55 2006 +0200 |
Wolfgang Denk | cf48eb9 | 2006-04-16 10:51:58 +0200 | [diff] [blame] | 9376 | |
Wolfgang Denk | 4e53a25 | 2006-10-25 00:43:17 +0200 | [diff] [blame] | 9377 | Switch to automatically generated CHANGELOG file. |
| 9378 | (use "make CHANGELOG" to update it from time to time) |
Stefan Roese | af9e1f5 | 2006-10-17 06:14:31 +0200 | [diff] [blame] | 9379 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9380 | commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| 9381 | Author: Stefan Roese <sr@denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9382 | Date: Tue Oct 24 18:06:48 2006 +0200 |
Wolfgang Denk | cf48eb9 | 2006-04-16 10:51:58 +0200 | [diff] [blame] | 9383 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9384 | Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c |
| 9385 | Patch by Stefan Roese, 24 Oct 2006 |
Marian Balakowicz | 8318fbf | 2006-10-23 22:17:05 +0200 | [diff] [blame] | 9386 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9387 | commit 8ae3b713b2286e0c3213b7802062e4c1599010de |
| 9388 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9389 | Date: Tue Oct 24 17:24:55 2006 +0200 |
Stefan Roese | 7ade0c6 | 2006-10-24 18:06:48 +0200 | [diff] [blame] | 9390 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9391 | Merge with /home/wd/git/u-boot/master |
Wolfgang Denk | ba999c5 | 2006-10-20 17:54:33 +0200 | [diff] [blame] | 9392 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9393 | commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e |
| 9394 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9395 | Date: Tue Oct 24 15:32:57 2006 +0200 |
Wolfgang Denk | f836e41 | 2006-10-20 16:12:14 +0200 | [diff] [blame] | 9396 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9397 | Code cleanup |
Wolfgang Denk | f641471 | 2006-10-20 15:51:21 +0200 | [diff] [blame] | 9398 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9399 | commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e |
| 9400 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9401 | Date: Tue Oct 24 14:51:36 2006 +0200 |
Stefan Roese | 6a0766e | 2006-10-20 15:18:51 +0200 | [diff] [blame] | 9402 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9403 | Move atstk1000 files into vendor specific directory. |
| 9404 | Patch by Haavard Skinnemoen, 12 Sep 2006 |
Stefan Roese | edf0b54 | 2006-10-18 15:59:35 +0200 | [diff] [blame] | 9405 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9406 | commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 |
| 9407 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9408 | Date: Tue Oct 24 14:42:37 2006 +0200 |
Wolfgang Denk | 3231ea6 | 2006-10-18 22:31:08 +0200 | [diff] [blame] | 9409 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9410 | Add ATSTK1000 and ATSTK1002 board support |
| 9411 | Patch by Haavard Skinnemoen, 06 Sep 2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9412 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9413 | This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| 9414 | daughterboard. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9415 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9416 | ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| 9417 | has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, |
| 9418 | and connectors for USART, PS/2, VGA, USB, MMC/SD cards and |
| 9419 | CompactFlash cards. For more information, please see this page: |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9420 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9421 | http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9422 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9423 | The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| 9424 | AT32AP7000 chip. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9425 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9426 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
Stefan Roese | d776233 | 2006-10-12 19:50:17 +0200 | [diff] [blame] | 9427 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9428 | commit f93ae788c3640fcde5db383471d45548ff4060d0 |
| 9429 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9430 | Date: Tue Oct 24 14:31:24 2006 +0200 |
Stefan Roese | e0a4655 | 2006-10-12 19:43:29 +0200 | [diff] [blame] | 9431 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9432 | Add common serial driver for Atmel AT32 and AT91 chips |
| 9433 | Patch by Haavard Skinnemoen, 06 Sep 2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9434 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9435 | This is a first attempt at creating a common serial driver for Atmel |
| 9436 | chips. For now, it supports the AT32AP7000 AVR32 chip, but it should |
| 9437 | be possible to support AT91RM9200 and other ARM-based chips with some |
| 9438 | minor modifications. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9439 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9440 | There's nothing fundamentally AVR32-specific in this driver, but it |
| 9441 | does use some features which are currently only defined for the |
| 9442 | AT32AP CPU port: |
| 9443 | * pm_get_clock_freq: Obtain the clock frequency of a given domain |
| 9444 | * gd->console_uart: A "struct device" containing information about |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9445 | register mappings, gpio resources and clocks associated with the |
| 9446 | UART device. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9447 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9448 | For more information about these features, please see the "AT32AP |
| 9449 | CPU" patch. |
Wolfgang Denk | 87621bc | 2006-10-12 11:43:47 +0200 | [diff] [blame] | 9450 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9451 | commit 72a087e04705c26cad982879ebd06b5281bf825a |
| 9452 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9453 | Date: Tue Oct 24 14:27:35 2006 +0200 |
Stefan Roese | 5c34eee | 2006-10-12 07:04:24 +0200 | [diff] [blame] | 9454 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9455 | Add AT32AP CPU and AT32AP7000 SoC support |
| 9456 | Patch by Haavard Skinnemoen, 06 Sep 2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9457 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9458 | This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| 9459 | chip, which is the first chip implementing the AVR32 architecture. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9460 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9461 | The AT32AP CPU core is a high-performance implementation featuring a |
| 9462 | 7-stage pipeline, separate instruction- and data caches, and a MMU. |
| 9463 | For more information, please see the "AVR32 AP Technical Reference": |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9464 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9465 | http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9466 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9467 | In addition to this, the AT32AP7000 chip comes with a large set of |
| 9468 | integrated peripherals, many of which are shared with the AT91 series |
| 9469 | of ARM-based microcontrollers from Atmel. Full data sheet is |
| 9470 | available here: |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9471 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9472 | http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9473 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9474 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
Stefan Roese | 752d683 | 2006-10-11 16:57:01 +0200 | [diff] [blame] | 9475 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9476 | commit 7b64fef33c66be648826c0ff9758298ef13d0604 |
| 9477 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9478 | Date: Tue Oct 24 14:21:16 2006 +0200 |
Stefan Roese | 2255b2d | 2006-10-10 12:36:02 +0200 | [diff] [blame] | 9479 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9480 | Add AVR32 architecture support |
| 9481 | Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9482 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9483 | This patch adds common infrastructure code for the Atmel AVR32 |
| 9484 | architecture. See doc/README.AVR32 for details. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9485 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9486 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
Stefan Roese | 1a1b737 | 2006-10-09 12:55:38 +0200 | [diff] [blame] | 9487 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9488 | commit 2da2d9a4766063b9848f3a35ad6025499cf87265 |
| 9489 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9490 | Date: Tue Oct 24 13:57:33 2006 +0200 |
Wolfgang Denk | d262a92 | 2006-10-09 12:50:41 +0200 | [diff] [blame] | 9491 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9492 | Use -g instead of -gstabs in AFLAGS_DEBUG |
| 9493 | Patch by Haavard Skinnemoen, 30 Aug 2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9494 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9495 | In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| 9496 | matter what the target's preferred debugging format is. This patch |
| 9497 | simply replaces -gstabs with -g, so that the default debugging format |
| 9498 | for the architecture is used. |
Wolfgang Denk | d82718f | 2006-10-09 01:26:14 +0200 | [diff] [blame] | 9499 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9500 | commit 965829872169c2996023840d98e1d85ad148d629 |
| 9501 | Author: Wolfgang Denk <wd@pollux.denx.de> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9502 | Date: Tue Oct 24 13:55:18 2006 +0200 |
Wolfgang Denk | 1d92b2e | 2006-10-09 01:07:53 +0200 | [diff] [blame] | 9503 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9504 | Fix/workaround broken dependency handling with make 3.81 |
| 9505 | Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 |
Wolfgang Denk | 2b208f5 | 2006-10-09 01:02:05 +0200 | [diff] [blame] | 9506 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9507 | commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a |
| 9508 | Author: Marian Balakowicz <m8@semihalf.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9509 | Date: Mon Oct 23 22:17:05 2006 +0200 |
Wolfgang Denk | 511d0c7 | 2006-10-09 00:42:01 +0200 | [diff] [blame] | 9510 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9511 | Fix sequoia separate object direcory building problems. |
Wolfgang Denk | 8d4ac79 | 2006-10-09 00:35:30 +0200 | [diff] [blame] | 9512 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9513 | commit 3dfa9cfdcee78b30da3432318b32821ffabe974b |
| 9514 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9515 | Date: Fri Oct 20 17:16:35 2006 -0500 |
Wolfgang Denk | ac61170 | 2006-09-20 23:47:49 +0200 | [diff] [blame] | 9516 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9517 | Use generic I2C register block on 85xx and 86xx. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9518 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9519 | Replace private IMMAP I2C structures with generic reg block |
| 9520 | and allow 86xx to have multiple I2C device busses. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9521 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9522 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Marian Balakowicz | 7299712 | 2006-10-03 20:28:38 +0200 | [diff] [blame] | 9523 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9524 | commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c |
| 9525 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9526 | Date: Fri Oct 20 15:54:34 2006 -0500 |
Stefan Roese | 56fb6ba | 2006-10-04 07:12:49 +0200 | [diff] [blame] | 9527 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9528 | Fix compilation warnings on a few 85xx boards. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9529 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9530 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | d373325 | 2006-10-04 07:12:27 +0200 | [diff] [blame] | 9531 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9532 | commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 |
| 9533 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9534 | Date: Fri Oct 20 15:50:15 2006 -0500 |
Wolfgang Denk | aeec782 | 2006-09-13 10:47:05 +0200 | [diff] [blame] | 9535 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9536 | Converted all 85xx boards to use a common FSL I2C driver. |
| 9537 | Introduced COFIG_FSL_I2C to select the common FSL I2C driver. |
| 9538 | And removed hard i2c path from a few u-boot.lds scipts too. |
| 9539 | Minor whitespace cleanups along the way. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9540 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9541 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | d214fbb | 2006-09-13 10:29:32 +0200 | [diff] [blame] | 9542 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9543 | commit 4d45f69e362b05892c9e92a7907e5820995612aa |
| 9544 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9545 | Date: Thu Oct 19 12:02:24 2006 -0500 |
Stefan Roese | 854bc8d | 2006-09-13 13:51:58 +0200 | [diff] [blame] | 9546 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9547 | Rewrite a series of goto statements as a sequences of |
| 9548 | conditional expressions instead. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9549 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9550 | Use consistent return code 0/-1 for good/bad indicators. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9551 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9552 | Include one fewer file if the driver isn't used at all. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9553 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9554 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | d12ae80 | 2006-09-12 20:19:10 +0200 | [diff] [blame] | 9555 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9556 | commit 7237c033b02fe295880435f1eb80819a0c987532 |
| 9557 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9558 | Date: Thu Oct 19 11:02:16 2006 -0500 |
Stefan Roese | a73c8db | 2006-09-12 08:49:07 +0200 | [diff] [blame] | 9559 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9560 | Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9561 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9562 | in an effort to begin to unify the umpteen FSL I2C drivers that |
| 9563 | are all otherwise very similar. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9564 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9565 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | a87d46f | 2006-09-13 10:23:06 +0200 | [diff] [blame] | 9566 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9567 | commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b |
| 9568 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9569 | Date: Thu Oct 19 11:33:52 2006 -0500 |
Marian Balakowicz | baf3124 | 2006-09-07 17:25:40 +0200 | [diff] [blame] | 9570 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9571 | * Fix a bunch of compiler warnings for gcc 4.0 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9572 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9573 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Marian Balakowicz | 5e09054 | 2006-09-07 12:12:20 +0200 | [diff] [blame] | 9574 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9575 | commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| 9576 | Author: Stefan Roese <sr@denx.de> |
| 9577 | Date: Tue Oct 17 06:14:31 2006 +0200 |
| 9578 | |
| 9579 | Add monitor functions for indirect access to PPC440 DCR's |
| 9580 | Patch by Leonid Baryudin, 12 Oct 2006 |
| 9581 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9582 | commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| 9583 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9584 | Date: Fri Oct 13 16:47:53 2006 -0500 |
Marian Balakowicz | 4f0645e | 2006-09-07 12:05:53 +0200 | [diff] [blame] | 9585 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9586 | Fixed leading whitespace issues. |
| 9587 | Removed spurious LAWAR thing. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9588 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9589 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 2d65896 | 2006-09-07 13:09:53 +0200 | [diff] [blame] | 9590 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9591 | commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 |
| 9592 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9593 | Date: Thu Oct 12 10:42:36 2006 -0500 |
Stefan Roese | efa2058 | 2006-09-07 12:48:49 +0200 | [diff] [blame] | 9594 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9595 | Remove unneeded include files and local variable. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9596 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9597 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 8cacfb8 | 2006-09-07 12:23:02 +0200 | [diff] [blame] | 9598 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9599 | commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 |
| 9600 | Author: Grant Likely <grant.likely@secretlab.ca> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9601 | Date: Tue Oct 10 00:23:32 2006 -0600 |
Stefan Roese | 887e2ec | 2006-09-07 11:51:23 +0200 | [diff] [blame] | 9602 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9603 | Fix possible uninitialized variable compiler warning. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9604 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9605 | When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| 9606 | do_bootm_linux() may be uninitialized. There is no possibility in the |
| 9607 | current code that len will get used uninitialized, but this fix follows |
| 9608 | the existing convention of setting both len and data to zero at the same |
| 9609 | time. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9610 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9611 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
Wolfgang Denk | 0dab03b | 2006-09-06 23:29:15 +0200 | [diff] [blame] | 9612 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9613 | commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e |
| 9614 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9615 | Date: Wed Oct 11 15:13:01 2006 -0500 |
Wolfgang Denk | f60ba0d | 2006-09-04 02:01:27 +0200 | [diff] [blame] | 9616 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9617 | * Fix a bunch of compiler warnings for gcc 4.0 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9618 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9619 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 6741ae9 | 2006-09-04 01:03:57 +0200 | [diff] [blame] | 9620 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9621 | commit bf651baa365e5447246aad6a633ccd667cf24a39 |
| 9622 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9623 | Date: Wed Oct 11 10:10:43 2006 -0500 |
Marian Balakowicz | f932863 | 2006-09-01 19:49:50 +0200 | [diff] [blame] | 9624 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9625 | Move "ar" flags to config.mk to allow for silent "make -s" |
Marian Balakowicz | 24d3d37 | 2006-09-01 19:47:42 +0200 | [diff] [blame] | 9626 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9627 | commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e |
| 9628 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9629 | Date: Tue Oct 10 17:19:03 2006 -0500 |
Marian Balakowicz | 6608043 | 2006-09-01 19:46:22 +0200 | [diff] [blame] | 9630 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9631 | Coding style changes to remove local varible blocks |
| 9632 | and reformat a bit nicer. |
Marian Balakowicz | 4c15ef5 | 2006-09-01 19:44:05 +0200 | [diff] [blame] | 9633 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9634 | commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a |
| 9635 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9636 | Date: Tue Oct 10 17:16:04 2006 -0500 |
Wolfgang Denk | 360b410 | 2006-09-03 18:17:46 +0200 | [diff] [blame] | 9637 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9638 | Fix whitespace issues. |
Detlev Zundel | 2c05165 | 2006-09-01 15:39:02 +0200 | [diff] [blame] | 9639 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9640 | commit 7b382b7125f2397cce63253df62f183e3dfa2770 |
| 9641 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9642 | Date: Tue Oct 10 17:14:45 2006 -0500 |
Detlev Zundel | 2c05165 | 2006-09-01 15:39:02 +0200 | [diff] [blame] | 9643 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9644 | Fix whitespace issues. |
Detlev Zundel | 2c05165 | 2006-09-01 15:39:02 +0200 | [diff] [blame] | 9645 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9646 | commit e10390ddd736b0dad1528eec4b0fe35c0827139a |
| 9647 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9648 | Date: Tue Oct 10 17:06:53 2006 -0500 |
Detlev Zundel | 2c05165 | 2006-09-01 15:39:02 +0200 | [diff] [blame] | 9649 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9650 | Fix whitespace issues. |
Wolfgang Denk | 7d0432c | 2006-08-31 16:46:53 +0200 | [diff] [blame] | 9651 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9652 | commit 89875e96ba3f023157bf50d5f8e33bf254964a76 |
| 9653 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9654 | Date: Tue Oct 10 17:03:43 2006 -0500 |
Wolfgang Denk | e8143e7 | 2006-08-30 23:09:00 +0200 | [diff] [blame] | 9655 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9656 | Ran lindent and cleaned up whitespace issues. |
| 9657 | Format for 80-columns too. |
Wolfgang Denk | 0fd3025 | 2006-08-30 23:02:10 +0200 | [diff] [blame] | 9658 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9659 | commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| 9660 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9661 | Date: Tue Oct 10 17:02:22 2006 -0500 |
Stefan Roese | 2b393b0 | 2006-08-29 08:05:15 +0200 | [diff] [blame] | 9662 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9663 | Fix whitespace and 80-col issues. |
Stefan Roese | f5577aa | 2006-08-29 08:04:32 +0200 | [diff] [blame] | 9664 | |
Wolfgang Denk | 8d9a861 | 2006-11-30 01:54:07 +0100 | [diff] [blame] | 9665 | commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 |
| 9666 | Author: Stefan Roese <sr@denx.de> |
| 9667 | Date: Sat Oct 7 11:36:51 2006 +0200 |
| 9668 | |
| 9669 | CFG_NAND_QUIET_TEST added to not warn upon missing NAND device |
| 9670 | Patch by Stefan Roese, 07 Oct 2006 |
| 9671 | |
| 9672 | commit 5bc528fa4da751d472397b308137238a6465afd2 |
| 9673 | Author: Stefan Roese <sr@denx.de> |
| 9674 | Date: Sat Oct 7 11:35:25 2006 +0200 |
| 9675 | |
| 9676 | Update ALPR code (NAND support working now) |
| 9677 | Patch by Stefan Roese, 07 Oct 2006 |
| 9678 | |
| 9679 | commit 77d5034847d328753b80c46b83f960a14a26f40e |
| 9680 | Author: Stefan Roese <sr@denx.de> |
| 9681 | Date: Sat Oct 7 11:33:03 2006 +0200 |
| 9682 | |
| 9683 | Remove compile warnings in fpga code |
| 9684 | Patch by Stefan Roese, 07 Oct 2006 |
| 9685 | |
| 9686 | commit f3443867e90d2979a7dd1c65b0d537777e1f9850 |
| 9687 | Author: Stefan Roese <sr@denx.de> |
| 9688 | Date: Sat Oct 7 11:30:52 2006 +0200 |
| 9689 | |
| 9690 | Add CONFIG_BOARD_RESET to configure board specific reset function |
| 9691 | Patch by Stefan Roese, 07 Oct 2006 |
| 9692 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9693 | commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| 9694 | Author: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9695 | Date: Fri Sep 29 08:23:12 2006 +0100 |
Wolfgang Denk | 21a9cc0 | 2006-08-29 10:49:11 +0200 | [diff] [blame] | 9696 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9697 | Fix missing tCycle/modfreq calculation. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9698 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9699 | Signed-off-by: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 1685091 | 2006-08-27 18:10:01 +0200 | [diff] [blame] | 9700 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9701 | commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| 9702 | Author: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9703 | Date: Wed Sep 13 10:33:35 2006 -0500 |
Wolfgang Denk | 113f64e | 2006-08-25 01:38:04 +0200 | [diff] [blame] | 9704 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9705 | Updated config headers to add default FDT-based booting |
Bartlomiej Sieka | ddde6b7 | 2006-08-22 10:38:18 +0200 | [diff] [blame] | 9706 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9707 | commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| 9708 | Author: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9709 | Date: Wed Sep 13 10:34:18 2006 -0500 |
Wolfgang Denk | ed1cf84 | 2006-08-24 00:26:42 +0200 | [diff] [blame] | 9710 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9711 | Add support for eTSEC 3 & 4 on 8548 CDS |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9712 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9713 | * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| 9714 | This will only work on rev 1.3 boards (but doesn't break older boards) |
| 9715 | * Cleaned up some comments to reflect the expanded role of tsec |
| 9716 | in other systems |
Marian Balakowicz | 6d3bc9b | 2006-08-18 19:14:46 +0200 | [diff] [blame] | 9717 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9718 | commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| 9719 | Author: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9720 | Date: Wed Sep 13 10:33:56 2006 -0500 |
Rafal Jaworowski | 6fe16a8 | 2006-08-18 10:39:11 +0200 | [diff] [blame] | 9721 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9722 | Added code to support 2.6.18 PCI changes in u-boot |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9723 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9724 | * Added code to swizzle the IRQ map for the PCI |
Wolfgang Denk | 94568b6 | 2006-08-14 23:23:06 +0200 | [diff] [blame] | 9725 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9726 | commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| 9727 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9728 | Date: Tue Sep 19 09:34:10 2006 -0500 |
Wolfgang Denk | 2f6fa46 | 2006-08-14 23:17:47 +0200 | [diff] [blame] | 9729 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9730 | Modified makefile for new build mechanism. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9731 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9732 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | ddd5d9d | 2006-08-14 22:43:13 +0200 | [diff] [blame] | 9733 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9734 | commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| 9735 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9736 | Date: Thu Sep 14 08:40:36 2006 -0500 |
Wolfgang Denk | 80f0c0f | 2006-08-14 22:05:26 +0200 | [diff] [blame] | 9737 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9738 | Handle 86xx SVR values according to the new Reference Manual. |
| 9739 | Both 8641 and 8641D have SVR == 0x8090, and are distinguished |
| 9740 | by the byte in bits 16-23 instead. |
| 9741 | Thanks to Jason Jin for noticing. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9742 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9743 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | d689e34 | 2006-08-14 21:18:21 +0200 | [diff] [blame] | 9744 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9745 | commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| 9746 | Author: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9747 | Date: Mon Aug 28 14:25:31 2006 +0800 |
Wolfgang Denk | 0a0f3a4 | 2006-08-17 10:48:36 +0200 | [diff] [blame] | 9748 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9749 | Fixed an OF-tree off-by-one bug when adding a new property name. |
| 9750 | This bug will cause the kernel booting to pause a long time. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9751 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9752 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 9753 | (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) |
Wolfgang Denk | 6183bb9 | 2006-08-17 00:50:26 +0200 | [diff] [blame] | 9754 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9755 | commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| 9756 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9757 | Date: Tue Aug 29 11:05:09 2006 -0500 |
Wolfgang Denk | 463764c | 2006-08-17 00:36:51 +0200 | [diff] [blame] | 9758 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9759 | Remove trailing empty lines. |
Stefan Roese | d8f961b | 2006-08-07 15:08:44 +0200 | [diff] [blame] | 9760 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9761 | commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| 9762 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9763 | Date: Tue Aug 29 09:48:49 2006 -0500 |
Stefan Roese | 4f92ed5 | 2006-08-07 14:33:32 +0200 | [diff] [blame] | 9764 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9765 | Remove bogus msync and use volatile asm. |
Stefan Roese | 9ede3cc | 2006-08-07 14:31:21 +0200 | [diff] [blame] | 9766 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9767 | commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| 9768 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9769 | Date: Tue Aug 29 08:17:14 2006 -0500 |
Stefan Roese | e335496 | 2006-08-07 14:29:04 +0200 | [diff] [blame] | 9770 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9771 | Add myself as maintainer for MPC8641HPCN. |
Rafal Jaworowski | 36b904a | 2006-08-11 12:35:52 +0200 | [diff] [blame] | 9772 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9773 | commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| 9774 | Author: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9775 | Date: Mon Aug 28 14:25:31 2006 +0800 |
Wolfgang Denk | d8519dc | 2006-08-11 17:33:42 +0200 | [diff] [blame] | 9776 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9777 | Fixed an OF-tree off-by-one bug when adding a new property name. |
| 9778 | This bug will cause the kernel booting to pause a long time. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9779 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9780 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 015c200 | 2006-08-11 17:29:38 +0200 | [diff] [blame] | 9781 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9782 | commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| 9783 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9784 | Date: Fri Aug 25 14:38:34 2006 -0400 |
Rafal Jaworowski | 692519b | 2006-08-10 12:43:17 +0200 | [diff] [blame] | 9785 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9786 | Change ramdiskaddr and dtbaddr |
| 9787 | Remove PEX fluff commands. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9788 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9789 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 9790 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | a3d9181 | 2006-08-10 01:58:22 +0200 | [diff] [blame] | 9791 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9792 | commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| 9793 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9794 | Date: Wed Aug 23 13:32:45 2006 -0500 |
Bartlomiej Sieka | e51aae3 | 2006-08-03 23:20:13 +0200 | [diff] [blame] | 9795 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9796 | * Another small fix for booting with disable_of |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9797 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9798 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 6587f7e | 2006-08-07 20:28:05 +0200 | [diff] [blame] | 9799 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9800 | commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| 9801 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9802 | Date: Wed Aug 23 11:04:43 2006 -0500 |
Stefan Roese | a2c95a7 | 2006-07-28 18:34:58 +0200 | [diff] [blame] | 9803 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9804 | Cleanup and lindent new AHCI driver. |
Stefan Roese | 193dd95 | 2006-07-27 16:14:05 +0200 | [diff] [blame] | 9805 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9806 | commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| 9807 | Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9808 | Date: Wed Aug 23 19:15:12 2006 +0800 |
Stefan Roese | 3ca9122 | 2006-07-27 16:11:19 +0200 | [diff] [blame] | 9809 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9810 | Add AHCI define and sata support for MPC8641HPCN board. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9811 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9812 | Signed-off-by:Jason Jin<jason.jin@freescale.com> |
Wolfgang Denk | 4c4aca8 | 2006-07-26 10:33:37 +0200 | [diff] [blame] | 9813 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9814 | commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| 9815 | Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9816 | Date: Wed Aug 23 19:10:44 2006 +0800 |
Wolfgang Denk | 4819fad | 2006-07-23 22:40:51 +0200 | [diff] [blame] | 9817 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9818 | Add AHCI support to u-boot |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9819 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9820 | Add AHCI support in u-boot, enable the sata disk controllers which |
| 9821 | following the AHCI protocol. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9822 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9823 | Signed-off-by:Jason Jin<jason.jin@freescale.com> |
Wolfgang Denk | fd27996 | 2006-07-22 21:45:49 +0200 | [diff] [blame] | 9824 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9825 | commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| 9826 | Author: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9827 | Date: Wed Aug 23 17:54:32 2006 +0800 |
Wolfgang Denk | 135ae00 | 2006-07-22 01:20:03 +0200 | [diff] [blame] | 9828 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9829 | Add dtb boot-up parameter to default boot commands. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9830 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9831 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 966083e | 2006-07-21 15:24:56 +0200 | [diff] [blame] | 9832 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9833 | commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| 9834 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9835 | Date: Tue Aug 22 18:26:08 2006 -0500 |
Wolfgang Denk | 144f779 | 2006-07-21 15:21:40 +0200 | [diff] [blame] | 9836 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9837 | Cleanup even more poorly introduced whitespace. |
Wolfgang Denk | b9365a2 | 2006-07-21 11:56:05 +0200 | [diff] [blame] | 9838 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9839 | commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| 9840 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9841 | Date: Tue Aug 22 18:07:00 2006 -0500 |
Wolfgang Denk | 87a5c73 | 2006-07-21 11:38:33 +0200 | [diff] [blame] | 9842 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9843 | Cleanup more poorly introduced whitespace. |
Wolfgang Denk | 029b6dc | 2006-07-21 11:37:40 +0200 | [diff] [blame] | 9844 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9845 | commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| 9846 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9847 | Date: Tue Aug 22 17:54:05 2006 -0500 |
Wolfgang Denk | b9365a2 | 2006-07-21 11:56:05 +0200 | [diff] [blame] | 9848 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9849 | Cleanup poorly introduced whitespace. |
Wolfgang Denk | b9365a2 | 2006-07-21 11:56:05 +0200 | [diff] [blame] | 9850 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9851 | commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| 9852 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9853 | Date: Tue Aug 22 12:25:27 2006 -0500 |
Wolfgang Denk | b9365a2 | 2006-07-21 11:56:05 +0200 | [diff] [blame] | 9854 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9855 | General indent and whitespace cleanups. |
Wolfgang Denk | e644670 | 2006-07-21 11:30:18 +0200 | [diff] [blame] | 9856 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9857 | commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| 9858 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9859 | Date: Tue Aug 22 12:06:18 2006 -0500 |
Wolfgang Denk | 53dd6ce | 2006-07-21 11:29:20 +0200 | [diff] [blame] | 9860 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9861 | General indent and whitespace cleanups. |
Wolfgang Denk | 0352f17 | 2006-07-21 11:24:47 +0200 | [diff] [blame] | 9862 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9863 | commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| 9864 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9865 | Date: Tue Aug 22 10:42:21 2006 -0500 |
Wolfgang Denk | 311d802 | 2006-07-21 11:20:46 +0200 | [diff] [blame] | 9866 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9867 | Cleanup compiler warnings. |
Wolfgang Denk | 5078cce | 2006-07-21 11:16:34 +0200 | [diff] [blame] | 9868 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9869 | commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| 9870 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9871 | Date: Tue Aug 22 09:31:59 2006 -0500 |
Wolfgang Denk | 5078cce | 2006-07-21 11:16:34 +0200 | [diff] [blame] | 9872 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9873 | Fix disable_of booting |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9874 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9875 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 978b109 | 2006-07-19 18:01:38 +0200 | [diff] [blame] | 9876 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9877 | commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| 9878 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9879 | Date: Tue Aug 22 09:23:55 2006 -0500 |
Wolfgang Denk | 45a212c | 2006-07-19 17:52:30 +0200 | [diff] [blame] | 9880 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9881 | Support for FDT in uImage format, error when using FDT from flash |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9882 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9883 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | bd3143f | 2006-07-19 14:49:35 +0200 | [diff] [blame] | 9884 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9885 | commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| 9886 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9887 | Date: Tue Aug 15 15:12:55 2006 -0400 |
Wolfgang Denk | edd0b50 | 2006-07-19 14:44:03 +0200 | [diff] [blame] | 9888 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9889 | Unlock cache before kernel starts up for MPC86xx |
Wolfgang Denk | c786f42 | 2006-07-19 14:40:43 +0200 | [diff] [blame] | 9890 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9891 | commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| 9892 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9893 | Date: Tue Aug 15 15:13:15 2006 -0400 |
Wolfgang Denk | d053ce6 | 2006-07-19 14:23:12 +0200 | [diff] [blame] | 9894 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9895 | Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
Wolfgang Denk | 8936601 | 2006-07-19 14:16:38 +0200 | [diff] [blame] | 9896 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9897 | commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| 9898 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9899 | Date: Tue Aug 15 15:12:55 2006 -0400 |
Wolfgang Denk | 5a3dfef | 2006-07-19 14:13:02 +0200 | [diff] [blame] | 9900 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9901 | Unlock cache before kernel starts up for MPC86xx |
Wolfgang Denk | 0de7fa5 | 2006-07-19 14:07:21 +0200 | [diff] [blame] | 9902 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9903 | commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| 9904 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9905 | Date: Tue Aug 15 15:13:15 2006 -0400 |
Wolfgang Denk | b87dfd2 | 2006-07-19 13:50:38 +0200 | [diff] [blame] | 9906 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9907 | Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
Wolfgang Denk | f3e06df | 2006-07-18 17:44:19 +0200 | [diff] [blame] | 9908 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9909 | commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| 9910 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9911 | Date: Wed Aug 16 13:59:47 2006 -0500 |
Bartlomiej Sieka | f88a0ae | 2006-07-13 15:32:16 +0200 | [diff] [blame] | 9912 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9913 | * Fix disable_of booting |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9914 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9915 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | dbba399 | 2006-07-13 22:32:45 +0200 | [diff] [blame] | 9916 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9917 | commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| 9918 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9919 | Date: Wed Aug 16 10:54:09 2006 -0500 |
Wolfgang Denk | dbba399 | 2006-07-13 22:32:45 +0200 | [diff] [blame] | 9920 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9921 | * Support for FDT in uImage format, error when using FDT from flash |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9922 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9923 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | b87dfd2 | 2006-07-19 13:50:38 +0200 | [diff] [blame] | 9924 | |
Wolfgang Denk | 8d9a861 | 2006-11-30 01:54:07 +0100 | [diff] [blame] | 9925 | commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 |
| 9926 | Author: Stefan Roese <sr@denx.de> |
| 9927 | Date: Tue Aug 15 14:22:35 2006 +0200 |
| 9928 | |
| 9929 | Add initial support for the ALPR board from Prodrive |
| 9930 | NAND needs some additional testing |
| 9931 | Patch by Heiko Schocher, 15 Aug 2006 |
| 9932 | |
| 9933 | commit f0ff4692ff3372dec55074a8eb444943ab095abb |
| 9934 | Author: Stefan Roese <sr@denx.de> |
| 9935 | Date: Tue Aug 15 14:15:51 2006 +0200 |
| 9936 | |
| 9937 | Add FPGA Altera Cyclone 2 support |
| 9938 | Patch by Heiko Schocher, 15 Aug 2006 |
| 9939 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9940 | commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| 9941 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9942 | Date: Mon Aug 14 15:33:38 2006 -0500 |
Wolfgang Denk | 87791f3 | 2006-07-11 00:23:54 +0200 | [diff] [blame] | 9943 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9944 | Fix BAT0 to actually be cacheable, non-guarded as documented. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9945 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9946 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 985b950 | 2006-07-10 23:22:43 +0200 | [diff] [blame] | 9947 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9948 | commit 40bc83559db5745681909fd7382ae509567e116d |
| 9949 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9950 | Date: Wed Aug 9 15:32:16 2006 -0500 |
Wolfgang Denk | 9d40799 | 2006-07-10 23:07:28 +0200 | [diff] [blame] | 9951 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9952 | Removed MPC8641HPCN DTS source file from build. |
| 9953 | It is no longer linked into U-Boot; its sources are |
| 9954 | now located in the kernel tree. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9955 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9956 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Marian Balakowicz | edd6cf2 | 2006-07-06 21:17:24 +0200 | [diff] [blame] | 9957 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9958 | commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| 9959 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9960 | Date: Wed Jun 28 10:47:03 2006 -0500 |
Wolfgang Denk | caaeaf9 | 2006-07-05 10:42:14 +0200 | [diff] [blame] | 9961 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9962 | * Switched default PCI speed for 8540 ADS back to 33MHz |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9963 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9964 | * Added comments and a printf to warn that PCI-X won't |
| 9965 | work at 33MHz |
| 9966 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9967 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9968 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Marian Balakowicz | ce05de2 | 2006-07-04 08:47:23 +0200 | [diff] [blame] | 9969 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9970 | commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| 9971 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9972 | Date: Wed Jun 28 10:46:35 2006 -0500 |
Marian Balakowicz | d19206b | 2006-07-04 01:27:46 +0200 | [diff] [blame] | 9973 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9974 | * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9975 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9976 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Marian Balakowicz | fbb0b55 | 2006-07-04 00:55:47 +0200 | [diff] [blame] | 9977 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9978 | commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| 9979 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9980 | Date: Wed Jun 28 10:46:13 2006 -0500 |
Marian Balakowicz | fe84b48 | 2006-07-03 23:42:36 +0200 | [diff] [blame] | 9981 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9982 | * Added VIA configuration table |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9983 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9984 | * Added support for PCI2 on CDS |
| 9985 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9986 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9987 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Marian Balakowicz | bba6837 | 2006-06-30 18:35:04 +0200 | [diff] [blame] | 9988 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9989 | commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| 9990 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9991 | Date: Wed Jun 28 10:45:41 2006 -0500 |
Marian Balakowicz | 971a5dd | 2006-06-30 18:23:06 +0200 | [diff] [blame] | 9992 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9993 | * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 9994 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9995 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 3f7a63e | 2006-06-30 20:16:37 +0200 | [diff] [blame] | 9996 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 9997 | commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| 9998 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 9999 | Date: Wed Jun 28 10:45:17 2006 -0500 |
Wolfgang Denk | 3f7a63e | 2006-06-30 20:16:37 +0200 | [diff] [blame] | 10000 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10001 | * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10002 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10003 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | a63c31c | 2006-06-26 10:54:52 +0200 | [diff] [blame] | 10004 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10005 | commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| 10006 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10007 | Date: Wed Jun 28 10:44:49 2006 -0500 |
Heiko Schocher | cb0fdf3 | 2006-05-03 08:34:03 +0200 | [diff] [blame] | 10008 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10009 | * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10010 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10011 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | f73e73b | 2006-06-20 00:12:59 +0200 | [diff] [blame] | 10012 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10013 | commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| 10014 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10015 | Date: Wed Jun 28 10:44:23 2006 -0500 |
Wolfgang Denk | b87dfd2 | 2006-07-19 13:50:38 +0200 | [diff] [blame] | 10016 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10017 | * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10018 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10019 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 0c32d96 | 2006-06-16 17:32:31 +0200 | [diff] [blame] | 10020 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10021 | commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| 10022 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10023 | Date: Wed Jun 28 10:43:36 2006 -0500 |
Wolfgang Denk | c12cffc | 2006-06-16 17:04:45 +0200 | [diff] [blame] | 10024 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10025 | * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10026 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10027 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | c12cffc | 2006-06-16 17:04:45 +0200 | [diff] [blame] | 10028 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10029 | commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 |
| 10030 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10031 | Date: Wed Jun 28 10:43:00 2006 -0500 |
Wolfgang Denk | b87dfd2 | 2006-07-19 13:50:38 +0200 | [diff] [blame] | 10032 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10033 | * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 |
Wolfgang Denk | 10af6d5 | 2006-06-16 16:53:06 +0200 | [diff] [blame] | 10034 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10035 | commit 5498d90312aad9f6bdbf047986027c35b03cd163 |
| 10036 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10037 | Date: Wed Jun 28 10:42:24 2006 -0500 |
Wolfgang Denk | 14d9ab3 | 2006-06-16 16:50:42 +0200 | [diff] [blame] | 10038 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10039 | * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 |
Wolfgang Denk | 1ac7e17 | 2006-06-16 16:43:33 +0200 | [diff] [blame] | 10040 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10041 | commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe |
| 10042 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10043 | Date: Wed Jun 28 10:41:37 2006 -0500 |
Wolfgang Denk | bc8bb6d | 2006-06-16 16:40:54 +0200 | [diff] [blame] | 10044 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10045 | * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 |
Wolfgang Denk | bc8bb6d | 2006-06-16 16:40:54 +0200 | [diff] [blame] | 10046 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10047 | commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a |
| 10048 | Author: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10049 | Date: Wed Aug 9 14:33:50 2006 +0100 |
Wolfgang Denk | cebd1fc | 2006-06-16 16:14:28 +0200 | [diff] [blame] | 10050 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10051 | Add Rapidio support for the MPC8641HPCN |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10052 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10053 | Signed-off-by: John Traill <john.traill@freescale.com> |
Wolfgang Denk | cd65a3d | 2006-06-16 16:11:34 +0200 | [diff] [blame] | 10054 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10055 | commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 |
| 10056 | Author: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10057 | Date: Tue Aug 8 11:32:43 2006 +0100 |
Wolfgang Denk | 4bdb53c | 2006-06-16 15:56:12 +0200 | [diff] [blame] | 10058 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10059 | Fix caslat calculation |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10060 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10061 | Signed-off-by: John Traill <john.traill@freescale.com> |
Wolfgang Denk | b9fff8e | 2006-06-16 15:52:58 +0200 | [diff] [blame] | 10062 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10063 | commit 709d3073e74153278e7904a70819bbef7df50e1a |
| 10064 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10065 | Date: Thu Aug 3 16:17:56 2006 -0500 |
Wolfgang Denk | 3e9a299 | 2006-06-16 15:47:05 +0200 | [diff] [blame] | 10066 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10067 | Convert to mac-address in ethernet nodes. |
Wolfgang Denk | e00f41e | 2006-06-16 15:45:03 +0200 | [diff] [blame] | 10068 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10069 | commit 71748af833ca1017edf1415be376366ff2937d17 |
| 10070 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10071 | Date: Fri Jul 28 12:41:35 2006 -0400 |
Wolfgang Denk | 3332240 | 2006-06-16 15:40:48 +0200 | [diff] [blame] | 10072 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10073 | Correct the irq value of DUART2 |
Wolfgang Denk | 9e18a4b | 2006-06-14 16:48:18 +0200 | [diff] [blame] | 10074 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10075 | commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c |
| 10076 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10077 | Date: Fri Jul 28 12:41:41 2006 -0400 |
Stefan Roese | df02bd1 | 2006-06-14 10:18:39 +0200 | [diff] [blame] | 10078 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10079 | Change the space size of PEX IO in README |
Stefan Roese | ed4633c | 2006-06-13 18:55:07 +0200 | [diff] [blame] | 10080 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10081 | commit 239db37c94f7a92941c4465feceb867c609241c5 |
| 10082 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10083 | Date: Fri Jul 28 12:41:18 2006 -0400 |
Heiko Schocher | 9acb626 | 2006-04-20 08:42:42 +0200 | [diff] [blame] | 10084 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10085 | Move get_board_sys_clk to board directory |
Scott McNutt | 9cc8337 | 2006-06-08 13:37:39 -0400 | [diff] [blame] | 10086 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10087 | commit 492900b985439fbce1a118afde1e35def870db03 |
| 10088 | Author: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10089 | Date: Fri Jul 28 09:03:54 2006 +0100 |
Scott McNutt | 1f6ce8f | 2006-06-08 12:08:12 -0400 | [diff] [blame] | 10090 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10091 | Fix 8641HPCN pollution |
Scott McNutt | 3d22d0b | 2006-06-08 12:03:21 -0400 | [diff] [blame] | 10092 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10093 | commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 |
| 10094 | Author: John Traill <john.traill@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10095 | Date: Fri Jul 28 08:16:06 2006 +0100 |
Scott McNutt | c2ced00 | 2006-06-08 11:59:57 -0400 | [diff] [blame] | 10096 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10097 | Fix 8641HPCN timebase |
Wolfgang Denk | 5d7022b | 2006-06-09 21:19:21 +0200 | [diff] [blame] | 10098 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10099 | commit c86360b830f1eecd7a72208575dde4f57879faea |
| 10100 | Author: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10101 | Date: Fri Jul 28 00:01:34 2006 +0800 |
Wolfgang Denk | e461a24 | 2006-06-07 11:36:02 +0200 | [diff] [blame] | 10102 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10103 | Fixed OF device tree of mpc86xxhpcn board. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10104 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10105 | The changes works in with kernel irq mapping rework. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10106 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10107 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
Stefan Roese | 4526c87 | 2006-06-06 10:59:12 +0200 | [diff] [blame] | 10108 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10109 | commit bea3f28d285942bf3f7ab339ce85178ded544225 |
| 10110 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10111 | Date: Wed Jul 12 10:48:05 2006 -0400 |
Wolfgang Denk | 2fd9eb5 | 2006-06-02 17:04:21 +0200 | [diff] [blame] | 10112 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10113 | Add support for reading and writing mac addresses to or from ID EEPROM. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10114 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10115 | Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| 10116 | With attached patch, we can use command "mac/mac read/mac save/" |
| 10117 | to read and write EEPROM under u-boot prompt. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10118 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10119 | U-boot will calculate the checksum of EEPROM while bootup, |
| 10120 | if it is right, then u-boot will check whether the mac address |
| 10121 | of eTSEC0/1/2/3 is availalbe (non-zero). |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10122 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10123 | If there is mac address availabe in EEPROM, u-boot will use it, |
| 10124 | otherewise, u-boot will use the mac address defined in |
| 10125 | MPC8641HPCN.h. This matches the requirement to set unique mac address |
| 10126 | for each TSEC port. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10127 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10128 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 10129 | Signed-off-by: York Sun <yorksun@freescale.com> |
Wolfgang Denk | 2fd9eb5 | 2006-06-02 17:04:21 +0200 | [diff] [blame] | 10130 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10131 | commit fcb28e763415e0e4e66b0f45842d1557ae198e5e |
| 10132 | Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10133 | Date: Thu Jul 13 10:35:10 2006 -0500 |
Wolfgang Denk | 62b8f54 | 2006-06-02 11:46:20 +0200 | [diff] [blame] | 10134 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10135 | Fixed initrd issue by define big RAM |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10136 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10137 | Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
Wolfgang Denk | 392c252 | 2006-05-30 23:32:44 +0200 | [diff] [blame] | 10138 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10139 | commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 |
| 10140 | Author: Jason Jin <Jason.jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10141 | Date: Fri Jul 7 10:01:45 2006 -0500 |
Wolfgang Denk | b9b2480 | 2006-05-30 17:45:30 +0200 | [diff] [blame] | 10142 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10143 | We made a u-boot patch to fix the hang up issue |
| 10144 | when booting filesystem from ramdisk. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10145 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10146 | Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
Wolfgang Denk | ba94a1b | 2006-05-30 15:56:48 +0200 | [diff] [blame] | 10147 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10148 | commit 38433ccc5850ee70549af0b2bc5b920355ef5388 |
| 10149 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10150 | Date: Wed Jun 28 10:47:03 2006 -0500 |
Stefan Roese | 5770a1e | 2006-05-18 19:21:53 +0200 | [diff] [blame] | 10151 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10152 | * Switched default PCI speed for 8540 ADS back to 33MHz |
| 10153 | * Added comments and a printf to warn that PCI-X won't |
| 10154 | work at 33MHz |
| 10155 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10156 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10157 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Marian Balakowicz | b62fa91 | 2006-05-17 12:18:48 +0200 | [diff] [blame] | 10158 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10159 | commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 |
| 10160 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10161 | Date: Wed Jun 28 10:46:35 2006 -0500 |
Marian Balakowicz | 27333f8 | 2006-05-17 12:16:26 +0200 | [diff] [blame] | 10162 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10163 | * Fixed a bug where 8555 PCI code used the old variable and |
| 10164 | function names |
| 10165 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10166 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10167 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Stefan Roese | 56ced70 | 2006-05-15 15:11:20 +0200 | [diff] [blame] | 10168 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10169 | commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac |
| 10170 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10171 | Date: Wed Jun 28 10:46:13 2006 -0500 |
Wolfgang Denk | 6516525 | 2006-05-15 13:52:51 +0200 | [diff] [blame] | 10172 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10173 | * Added VIA configuration table |
| 10174 | * Added support for PCI2 on CDS |
| 10175 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10176 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10177 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 8cba090 | 2006-05-12 16:15:46 +0200 | [diff] [blame] | 10178 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10179 | commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc |
| 10180 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10181 | Date: Wed Jun 28 10:45:41 2006 -0500 |
Wolfgang Denk | 977b50f | 2006-05-10 17:43:20 +0200 | [diff] [blame] | 10182 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10183 | * Fixed PCI memory definitions |
| 10184 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10185 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10186 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Stefan Roese | 278bc4b | 2006-05-10 15:06:58 +0200 | [diff] [blame] | 10187 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10188 | commit 087454609e47295443af793a282cddcd91a5f49c |
| 10189 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10190 | Date: Wed Jun 28 10:45:17 2006 -0500 |
Stefan Roese | f90a392 | 2006-05-10 15:01:40 +0200 | [diff] [blame] | 10191 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10192 | * Added support for initializing second PCI bus on 85xx |
| 10193 | Patch by Andy Fleming 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10194 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10195 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Stefan Roese | 512f8d5 | 2006-05-10 14:10:41 +0200 | [diff] [blame] | 10196 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10197 | commit b636aaeb6fd516a442fb611bbeeddf3077a687fb |
| 10198 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10199 | Date: Wed Jun 28 10:44:49 2006 -0500 |
Stefan Roese | d1dd22f | 2006-05-10 11:49:37 +0200 | [diff] [blame] | 10200 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10201 | * Added PCI-X #defines for PCI-X initialization |
| 10202 | Patch by Andy Fleming on 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10203 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10204 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Stefan Roese | 77f6334 | 2006-05-10 11:28:48 +0200 | [diff] [blame] | 10205 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10206 | commit 20abbc6fffa115690107cc942c7abf84bdc03a1b |
| 10207 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10208 | Date: Wed Jun 28 10:44:23 2006 -0500 |
Stefan Roese | 6080a0e | 2006-05-10 10:55:16 +0200 | [diff] [blame] | 10209 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10210 | * Made sure the code which disables prefetch for PCI devices |
| 10211 | sets the size of the prefetch region to 0 |
| 10212 | Patch by Andy Fleming on 17-Mar-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10213 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10214 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
Wolfgang Denk | 4af099b | 2006-05-09 13:49:12 +0200 | [diff] [blame] | 10215 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10216 | commit 40d5fa35d02df22580593bf0039ab173367e8ef0 |
| 10217 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10218 | Date: Wed Jun 28 10:43:36 2006 -0500 |
Marian Balakowicz | 78b123c | 2006-05-09 11:54:44 +0200 | [diff] [blame] | 10219 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10220 | * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards |
| 10221 | Patch by Jon Loeliger 17-Jan-2006 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10222 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10223 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Marian Balakowicz | 6f5155a | 2006-05-09 11:51:51 +0200 | [diff] [blame] | 10224 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10225 | commit be7e8b0cb5a0c49dc180075b96df296a893bf146 |
| 10226 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10227 | Date: Wed Jun 28 10:43:00 2006 -0500 |
Marian Balakowicz | b75ef85 | 2006-05-09 11:45:31 +0200 | [diff] [blame] | 10228 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10229 | * Removed the oftree.dts for stxxtx in light of the changes |
| 10230 | to the flat device tree handling code |
| 10231 | Patch by Matthew McClintock 26-June-2006 |
Marian Balakowicz | b4853b7 | 2006-05-09 11:43:59 +0200 | [diff] [blame] | 10232 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10233 | commit 1b380ec225665e73959677f3893dc658c5925e05 |
| 10234 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10235 | Date: Wed Jun 28 10:42:24 2006 -0500 |
Marian Balakowicz | 0c056f0 | 2006-05-09 11:37:13 +0200 | [diff] [blame] | 10236 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10237 | * Patch to modify ft_build.c to update flat device trees in place |
| 10238 | Patch by Matthew McClintock 26-June-2006 |
Marian Balakowicz | 483a0cf | 2006-05-09 11:28:36 +0200 | [diff] [blame] | 10239 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10240 | commit 98a9c4d468a942a09ebe8979bec508017f3e4462 |
| 10241 | Author: Matthew McClintock <msm@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10242 | Date: Wed Jun 28 10:41:37 2006 -0500 |
Wolfgang Denk | f149d86 | 2006-05-05 00:59:28 +0200 | [diff] [blame] | 10243 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10244 | * Modify bootm command to support booting with flat device trees |
| 10245 | Patch by Matthew McClintock 26-June-2006 |
Kumar Gala | 8fe9bf6 | 2006-04-20 13:45:32 -0500 | [diff] [blame] | 10246 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10247 | commit da012ab661fd4ab169dd7b9b32201a4df62cf34a |
| 10248 | Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10249 | Date: Wed Jun 28 08:43:56 2006 -0500 |
Wolfgang Denk | 610cf36 | 2006-05-03 01:24:04 +0200 | [diff] [blame] | 10250 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10251 | Change Id to symbolic name for RTL8139 |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10252 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10253 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
Wolfgang Denk | da4849f | 2006-05-03 01:04:58 +0200 | [diff] [blame] | 10254 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10255 | commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 |
| 10256 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10257 | Date: Tue Jun 27 18:12:10 2006 +0800 |
Wolfgang Denk | 983bebb | 2006-05-03 01:00:39 +0200 | [diff] [blame] | 10258 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10259 | Fix RTL8139 in big endian |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10260 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10261 | signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| 10262 | signed-off-by: Wei Zhang <wei.zhang@freescale.com> |
Wolfgang Denk | 983bebb | 2006-05-03 01:00:39 +0200 | [diff] [blame] | 10263 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10264 | commit fcfb9a57947fc203b99fe81ab0578f7286261f9f |
| 10265 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10266 | Date: Tue Jun 27 18:12:23 2006 +0800 |
Wolfgang Denk | 8546e23 | 2006-05-02 00:11:25 +0200 | [diff] [blame] | 10267 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10268 | Fix Tsec bug when no link |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10269 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10270 | When tftp a non-exist file from the tftp server, u-boot will check |
| 10271 | the link of all eth port. The original file will return wrong link |
| 10272 | state on the no link ports. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10273 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10274 | signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
Wolfgang Denk | 3577d3a | 2006-04-28 21:24:32 +0200 | [diff] [blame] | 10275 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10276 | commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 |
| 10277 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10278 | Date: Tue Jun 27 18:12:02 2006 +0800 |
dzu@denx.de | 6ca24c6 | 2006-04-21 18:30:47 +0200 | [diff] [blame] | 10279 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10280 | Fix bug for io_bar size during pci scan |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10281 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10282 | During the pci scan process, Some devices return bar_reponse with the |
| 10283 | highest bytes 0, such as the pci bridge in uli1575 return bar_response |
| 10284 | with 0xffffff, So the bar_size should be manually set under 64K. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10285 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10286 | Signed-off-by: Jason Jin <jason.jin@freescale.com> |
dzu@denx.de | a367d42 | 2006-04-19 11:52:46 +0200 | [diff] [blame] | 10287 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10288 | commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 |
| 10289 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10290 | Date: Tue Jun 27 18:11:54 2006 +0800 |
Wolfgang Denk | 8419c01 | 2006-04-18 11:05:03 +0200 | [diff] [blame] | 10291 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10292 | Enable PCIE1 for MPC8641HPCN board |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10293 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10294 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
Wolfgang Denk | cf48eb9 | 2006-04-16 10:51:58 +0200 | [diff] [blame] | 10295 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 10296 | commit 99d70e3a47affb9bae041a2caece7cd516e213b3 |
| 10297 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 10298 | Date: Mon Jun 26 11:06:00 2006 +0200 |
| 10299 | |
| 10300 | More code cleanup |
| 10301 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10302 | commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| 10303 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10304 | Date: Thu Jun 22 08:51:46 2006 -0500 |
Wolfgang Denk | 27e166b | 2005-12-19 13:02:45 +0100 | [diff] [blame] | 10305 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10306 | Fix bug in 8641hpcn reset command with no args. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10307 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10308 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 10309 | Acked-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 27e166b | 2005-12-19 13:02:45 +0100 | [diff] [blame] | 10310 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10311 | commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc |
| 10312 | Author: Zhang Wei <wei.zhang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10313 | Date: Tue Jun 20 17:47:15 2006 +0800 |
Wolfgang Denk | b81a463 | 2006-04-13 16:35:22 +0200 | [diff] [blame] | 10314 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10315 | Reworked IRQ mapping in OF-tree. |
Wolfgang Denk | b28a31c | 2006-04-12 12:26:32 +0200 | [diff] [blame] | 10316 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10317 | commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c |
| 10318 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10319 | Date: Thu Jun 15 21:33:37 2006 -0500 |
Wolfgang Denk | b28a31c | 2006-04-12 12:26:32 +0200 | [diff] [blame] | 10320 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10321 | Do not enable address translation on secondary CPUs. |
| 10322 | Do not set up BATs on secondary CPUs. Let Linux do the nasty. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10323 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10324 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | b28a31c | 2006-04-12 12:26:32 +0200 | [diff] [blame] | 10325 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 10326 | commit 386eda022473394ad8f36b86f2bdc9b4cb816291 |
| 10327 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 10328 | Date: Wed Jun 14 18:14:56 2006 +0200 |
| 10329 | |
| 10330 | Code cleanup |
| 10331 | |
| 10332 | commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 |
| 10333 | Author: Wolfgang Denk <wd@pollux.denx.de> |
| 10334 | Date: Wed Jun 14 17:45:53 2006 +0200 |
| 10335 | |
| 10336 | Various USB related patches |
| 10337 | - Add support for mpc8xx USB device. |
| 10338 | - Add support for Common Device Class - Abstract Control Model USB console. |
| 10339 | - Add support for flow control in USB slave devices. |
| 10340 | - Add support for switching between gserial and cdc_acm using environment. |
| 10341 | - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h |
| 10342 | - Update usbcore slightly to ease host enumeration. |
| 10343 | - Fix non-portable endian problems in usbdcore and usbdcore_ep0. |
| 10344 | - Add AdderUSB_config as a defconfig to enable usage of the USB console |
| 10345 | by default with the Adder87x U-Boot port. |
| 10346 | Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 |
| 10347 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10348 | commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| 10349 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10350 | Date: Wed Jun 7 10:53:55 2006 -0500 |
Wolfgang Denk | 5fbb2cd | 2006-04-06 11:35:18 +0200 | [diff] [blame] | 10351 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10352 | Fix a get_board_sys_clk() use-before-def warning. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10353 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10354 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10355 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10356 | commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 |
| 10357 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10358 | Date: Wed Jun 7 10:52:49 2006 -0500 |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10359 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10360 | Allow DTC path to be passed in. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10361 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10362 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10363 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10364 | commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 |
| 10365 | Author: Haiying Wang <haiying.wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10366 | Date: Tue Jun 6 16:54:29 2006 -0400 |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10367 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10368 | Modify the IRQ of DUART2 |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10369 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10370 | commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e |
| 10371 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10372 | Date: Wed May 31 13:55:35 2006 -0500 |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10373 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10374 | Review cleanups. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10375 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10376 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10377 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10378 | commit cb5965fb95b77a49f4e6af95248e0c849f4af03e |
| 10379 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10380 | Date: Wed May 31 12:44:44 2006 -0500 |
Stefan Roese | 2662b40 | 2006-04-01 13:41:03 +0200 | [diff] [blame] | 10381 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10382 | White space cleanup. |
| 10383 | Some 80-column cleanups. |
| 10384 | Convert printf() to puts() where possible. |
| 10385 | Use #include "spd_sdram.h" as needed. |
| 10386 | Enhanced reset command usage message a bit. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10387 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10388 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 3511853 | 2006-03-31 15:18:37 +0200 | [diff] [blame] | 10389 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10390 | commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 |
| 10391 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10392 | Date: Wed May 31 11:39:34 2006 -0500 |
Stefan Roese | 3511853 | 2006-03-31 15:18:37 +0200 | [diff] [blame] | 10393 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10394 | Removed unneeded local_bus_init() from 8641HPCN board. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10395 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10396 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 3511853 | 2006-03-31 15:18:37 +0200 | [diff] [blame] | 10397 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10398 | commit 4d3d729c16c392d2982d3266b659d333c927697d |
| 10399 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10400 | Date: Wed May 31 11:24:28 2006 -0500 |
Stefan Roese | 3511853 | 2006-03-31 15:18:37 +0200 | [diff] [blame] | 10401 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10402 | Moved mpc8641hpcn_board_reset() out of cpu/ into board/. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10403 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10404 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Stefan Roese | 3511853 | 2006-03-31 15:18:37 +0200 | [diff] [blame] | 10405 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10406 | commit b2a941de060350ad15878d8219825f4950e9bb8e |
| 10407 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10408 | Date: Wed May 31 10:07:28 2006 -0500 |
Wolfgang Denk | db28ddb | 2006-04-03 15:46:10 +0200 | [diff] [blame] | 10409 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10410 | Remove dead debug code. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10411 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10412 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 534ff67 | 2006-04-01 15:52:46 +0200 | [diff] [blame] | 10413 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10414 | commit 126aa70f10ba3d20e0a6f4d32328250513b77770 |
| 10415 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10416 | Date: Tue May 30 17:47:00 2006 -0500 |
Wolfgang Denk | 534ff67 | 2006-04-01 15:52:46 +0200 | [diff] [blame] | 10417 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10418 | Move mpc86xx PIXIS code to board directory |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10419 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10420 | First cut at moving the PIXIS platform code out of |
| 10421 | the 86xx cpu directory and into board/mpc8641hpcn |
| 10422 | where it belongs. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10423 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10424 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | d87080b | 2006-03-31 18:32:53 +0200 | [diff] [blame] | 10425 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 10426 | commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 |
| 10427 | Author: Markus Klotzbuecher <mk@denx.de> |
| 10428 | Date: Tue May 30 16:56:14 2006 +0200 |
| 10429 | |
| 10430 | Support generic OHCI support for the s3c24x0 cpu. |
| 10431 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10432 | commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| 10433 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10434 | Date: Tue May 30 09:10:32 2006 -0500 |
Wolfgang Denk | f6dbbe9 | 2006-03-25 18:42:54 +0100 | [diff] [blame] | 10435 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10436 | Improve "reset" command's interaction with watchdog. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10437 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10438 | "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| 10439 | "reset altbank wd" will reset another bank WITH watch dog enabled |
| 10440 | "diswd" will disable watch dog after u-boot boots up successfully |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10441 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10442 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 05d8dce | 2006-03-23 17:10:30 +0100 | [diff] [blame] | 10443 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10444 | commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a |
| 10445 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10446 | Date: Tue May 30 08:51:19 2006 -0500 |
Wolfgang Denk | 5725f94 | 2006-03-21 01:58:07 +0100 | [diff] [blame] | 10447 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10448 | Fix two SDRAM setup bugs. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10449 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10450 | Fix ECC setup bug. |
| 10451 | Enable 1T/2T based on number of DIMMs present. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10452 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10453 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 0b6ba54 | 2006-03-19 01:01:51 +0100 | [diff] [blame] | 10454 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10455 | commit d11fec5015334deb2010e36ce00bb118cc5429a5 |
| 10456 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10457 | Date: Fri May 26 10:24:48 2006 -0500 |
Marian Balakowicz | d326f4a | 2006-03-16 15:19:35 +0100 | [diff] [blame] | 10458 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10459 | Add first draft of the MPC8641HPCN doc/README. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10460 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10461 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Marian Balakowicz | 97f9800 | 2006-03-16 14:35:32 +0100 | [diff] [blame] | 10462 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10463 | commit ed45d6c930b5939718a87ee12e25cf9a05978d4a |
| 10464 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10465 | Date: Fri May 26 10:13:04 2006 -0500 |
Marian Balakowicz | 991425f | 2006-03-14 16:24:38 +0100 | [diff] [blame] | 10466 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10467 | Added pci@8000 block. |
| 10468 | Updated ethernet interrupt mappings (moved up 48). |
| 10469 | Cleaned up a few comments. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10470 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10471 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Marian Balakowicz | 4c8d1ec | 2006-03-14 16:23:35 +0100 | [diff] [blame] | 10472 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10473 | commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 |
| 10474 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10475 | Date: Fri May 26 10:01:16 2006 -0500 |
Marian Balakowicz | 61f2515 | 2006-03-14 16:14:48 +0100 | [diff] [blame] | 10476 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10477 | Allow args on reset command. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10478 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10479 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
Marian Balakowicz | 6d8ae5a | 2006-03-14 16:12:48 +0100 | [diff] [blame] | 10480 | |
Wolfgang Denk | 9986bc3 | 2007-08-12 21:34:50 +0200 | [diff] [blame] | 10481 | commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc |
| 10482 | Author: Markus Klotzbuecher <mk@denx.de> |
| 10483 | Date: Tue May 23 13:38:35 2006 +0200 |
| 10484 | |
| 10485 | Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some |
| 10486 | fixes to the latter. |
| 10487 | |
| 10488 | commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 |
| 10489 | Author: Markus Klotzbuecher <mk@denx.de> |
| 10490 | Date: Tue May 23 10:33:11 2006 +0200 |
| 10491 | |
| 10492 | More cleanup for the delta board and the generic usb_ohci driver. Added |
| 10493 | CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific |
| 10494 | initialization and cleanup hooks respectively. |
| 10495 | |
| 10496 | commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 |
| 10497 | Author: Markus Klotzbuecher <mk@denx.de> |
| 10498 | Date: Mon May 22 16:33:54 2006 +0200 |
| 10499 | |
| 10500 | This patch adds USB storage support for the delta board. This is the first |
| 10501 | board to make use of a generic OHCI driver, that calls hooks for board |
| 10502 | dependant initialization. |
| 10503 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10504 | commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| 10505 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10506 | Date: Fri May 19 13:28:39 2006 -0500 |
Marian Balakowicz | e24e0f0 | 2006-03-14 16:03:46 +0100 | [diff] [blame] | 10507 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10508 | Change arbitration to round-robin for SMP linux. |
Marian Balakowicz | cd94ba3 | 2006-03-14 16:02:31 +0100 | [diff] [blame] | 10509 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10510 | commit 9a655876e5995be80f49054e2509500e871e4d3a |
| 10511 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10512 | Date: Fri May 19 13:26:34 2006 -0500 |
Marian Balakowicz | a7c66ad | 2006-03-14 16:01:25 +0100 | [diff] [blame] | 10513 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10514 | Enable dual DDR controllers and interleaving. |
Marian Balakowicz | 6e53e27 | 2006-03-14 15:59:25 +0100 | [diff] [blame] | 10515 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10516 | commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c |
| 10517 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10518 | Date: Fri May 19 13:22:44 2006 -0500 |
Wolfgang Denk | 09e4b0c | 2006-03-17 11:42:53 +0100 | [diff] [blame] | 10519 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10520 | Update 86xx address map and LAWBARs. |
Wolfgang Denk | ff7fefe | 2006-03-13 12:37:35 +0100 | [diff] [blame] | 10521 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10522 | commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| 10523 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10524 | Date: Fri May 19 13:14:15 2006 -0500 |
Stefan Roese | 15940c9 | 2006-03-13 11:16:36 +0100 | [diff] [blame] | 10525 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10526 | Remove L2 Cache invalidate polling. |
Stefan Roese | 15940c9 | 2006-03-13 11:16:36 +0100 | [diff] [blame] | 10527 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10528 | commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 |
| 10529 | Author: Jon Loeliger <jdl@jdl.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10530 | Date: Fri May 19 12:33:09 2006 -0500 |
Stefan Roese | 15940c9 | 2006-03-13 11:16:36 +0100 | [diff] [blame] | 10531 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10532 | Enable 2nd CPU and I2C. |
Stefan Roese | f3fecfe | 2006-03-13 09:43:01 +0100 | [diff] [blame] | 10533 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10534 | commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| 10535 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10536 | Date: Mon May 15 07:26:56 2006 -0500 |
Stefan Roese | 9a7b408 | 2006-03-13 09:42:28 +0100 | [diff] [blame] | 10537 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10538 | Update interrupt mapping. |
Wolfgang Denk | 9551530 | 2006-03-13 01:00:22 +0100 | [diff] [blame] | 10539 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10540 | commit 6cfea33477b04b63ed47386ed1629529484c33ba |
| 10541 | Author: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10542 | Date: Wed May 10 09:38:06 2006 -0500 |
Wolfgang Denk | c15f80e | 2006-03-13 00:50:48 +0100 | [diff] [blame] | 10543 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10544 | Remove unneeded INIT_RAM_LOCK cache twiddling. |
| 10545 | Correctly tracks r29 as global data pointer now. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10546 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10547 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
Wolfgang Denk | b38dbd4 | 2006-03-13 00:46:05 +0100 | [diff] [blame] | 10548 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10549 | commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c |
| 10550 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10551 | Date: Wed May 10 09:33:07 2006 -0500 |
Wolfgang Denk | f07217c | 2006-03-12 23:27:46 +0100 | [diff] [blame] | 10552 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10553 | Remove unnecessary flash.c file. |
Wolfgang Denk | 84c960c | 2006-03-12 23:17:31 +0100 | [diff] [blame] | 10554 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10555 | commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| 10556 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10557 | Date: Tue May 9 08:23:49 2006 -0500 |
Wolfgang Denk | 763b5f3 | 2006-03-12 23:13:27 +0100 | [diff] [blame] | 10558 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10559 | Get MPC8641HPCN flash images working. |
Ben Warren | b985b5d | 2006-10-26 14:38:25 -0400 | [diff] [blame] | 10560 | |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10561 | Enable the CFI driver. |
| 10562 | Remove bogus LAWBAR7 cruft. |
| 10563 | Use correct TEXT_BASE, Fixup load script. |
| 10564 | Enable SPD EEPROM during DDR setup. |
| 10565 | Use generic RFC 1918 IP addresses by default. |
Wolfgang Denk | be5048f | 2006-03-12 22:50:55 +0100 | [diff] [blame] | 10566 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10567 | commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| 10568 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10569 | Date: Thu Apr 27 10:15:16 2006 -0500 |
Wolfgang Denk | ca27381 | 2006-03-12 22:45:47 +0100 | [diff] [blame] | 10570 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10571 | Cleanup whitespaces and style issues. |
| 10572 | Removed //-style comments. |
| 10573 | Use 80-column lines. |
| 10574 | Remove trailing whitespace. |
| 10575 | Remove dead code and debug cruft. |
Wolfgang Denk | 8123eee | 2006-03-12 22:41:33 +0100 | [diff] [blame] | 10576 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10577 | commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| 10578 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10579 | Date: Thu Apr 27 08:22:39 2006 -0500 |
Wolfgang Denk | 7c60908 | 2006-03-12 22:14:20 +0100 | [diff] [blame] | 10580 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10581 | Revert bad PCI prefetch limit change. |
Kumar Gala | 86902b8 | 2006-01-12 19:51:38 -0600 | [diff] [blame] | 10582 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10583 | commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| 10584 | Author: Jon Loeliger <jdl@freescale.com> |
Wolfgang Denk | 2b2a40b | 2006-10-26 16:24:31 +0200 | [diff] [blame] | 10585 | Date: Wed Apr 26 17:58:56 2006 -0500 |
Kumar Gala | 2688e2f | 2006-02-10 15:40:06 -0600 | [diff] [blame] | 10586 | |
Wolfgang Denk | 7c52c4b | 2006-10-24 21:35:55 +0200 | [diff] [blame] | 10587 | Initial support for MPC8641 HPCN board. |