po/de.po

# German translations for dnsmasq package.
# This file is put in the public domain.
# Simon Kelley <simon@thekelleys.org.uk>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: dnsmasq 2.24\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-07-20 20:03+0100\n"
"PO-Revision-Date: 2005-09-27 09:37+0100\n"
"Last-Translator: Simon Kelley <simon@thekelleys.org.uk>\n"
"Language-Team: German <de@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: cache.c:695
#, c-format
msgid "failed to load names from %s: %s"
msgstr ""

#: cache.c:729 dhcp.c:757
#, c-format
msgid "bad address at %s line %d"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: cache.c:776 dhcp.c:771
#, c-format
msgid "bad name at %s line %d"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: cache.c:783 dhcp.c:825
#, c-format
msgid "read %s - %d addresses"
msgstr "lese %s - %d Adressen"

# @Simon: 'lese' is present, is that ok? If it should be past, it would be
# @Simon: "gelesen: %s - %d Adressen" - note the colon, it's a must, then.
#: cache.c:821
msgid "cleared cache"
msgstr "Cache geleert"

# @Simon: "Cache geleert" is literally "Cache emptied" but I think other translations could be misleading
# @Simon: (I don't know a good german replacement for "Cache" but AFAIK "Cache" is common in german)
#: cache.c:870
#, c-format
msgid "not giving name %s to the DHCP lease of %s because the name exists in %s with address %s"
msgstr "Name %s wurde nicht dem DHCP 'Mieter' von %s zugewiesen, da der Name in %smit der Adresse %s bereits existiert"

#: cache.c:922
#, c-format
msgid "time %lu"
msgstr ""

# @Simon: "Mieter" is rather 'logder, renter, tenant, lessee' but I couldn't find anything that fits better.
# @Simon: So I thought I put it in ''-marks :)
#: cache.c:923
#, fuzzy, c-format
msgid "cache size %d, %d/%d cache insertions re-used unexpired cache entries."
msgstr "Cache Größe %d, %d/%d Cache-Einfügungen verwendeten nicht abgelaufene Cache-Einträge wieder."

#: cache.c:925
#, c-format
msgid "queries forwarded %u, queries answered locally %u"
msgstr ""

#: cache.c:948
#, c-format
msgid "server %s#%d: queries sent %u, retried or failed %u"
msgstr ""

#: util.c:58
#, c-format
msgid "failed to seed the random number generator: %s"
msgstr ""

# @Simon: "re-used" = "wiederverwenden", but in such a case it must be split apart to "verwendet ... wieder"
# @Simon: "unexpired" = "nicht abgelaufen" (expired=abgelaufen) -- altogether it sounds complicated in german,
# @Simon: I would prefer to use "noch gültige" = "still valid", would that fit to the sense? Then it would be:
# @Simon: msgstr "Cache Größe %d, %d/%d Cache-Einfügungen verwendeten noch gültige Cache-Einträge wieder."
# @Simon: btw, what is the "%d/%d"-part?
#: util.c:166
msgid "could not get memory"
msgstr "Speicher nicht verfügbar"

#: util.c:176
#, c-format
msgid "cannot create pipe: %s"
msgstr ""

#: util.c:184
#, c-format
msgid "failed to allocate %d bytes"
msgstr ""

# @Simon: not perfect but I cannot get nearer right now.
#: util.c:289
#, c-format
msgid "infinite"
msgstr "unendlich"

#: option.c:219
msgid "Specify local address(es) to listen on."
msgstr "Lokale abzuhörende Adresse(n) angeben."

# @Simon: Quite literal translation, sounds not too polite in german.
# @Simon: How about: "Bitte die lokalen abzuhörende Adresse(n) angeben."
# @Simon: = "Please specify the local address(es) to listen on."
#: option.c:220
msgid "Return ipaddr for all hosts in specified domains."
msgstr "Rückkehr-IP-Adresse für alle Geräte in angebenen Domänen"

# @Simon: I hope "Return ipaddr" is similar to "Return-ipaddr" and not "Return the ipaddr ... !"
#: option.c:221
msgid "Fake reverse lookups for RFC1918 private address ranges."
msgstr "'Gefälschte' Rückwärts-Ergebnisse für private Adressbereiche nach RFC1918"

# @Simon: I'm a bit unsure about the meaning of "Fake" here, and the best word for "lookup" is "Nachsehen" 
# @Simon: (that is "looking-for") but I think that cannot be used. "Ergebnisse" = "results", is that near enough?
#: option.c:222
msgid "Treat ipaddr as NXDOMAIN (defeats Verisign wildcard)."
msgstr "Behandle IP-Adr als NXDOMAIN (wehrt Verisign-Platzhalter ab)."

# @Simon: or "Behandle IP-Adr als NXDOMAIN (gegen Verisign-Platzhalter)."
# @Simon: "gegen" = "against", I believe that might be clumsy in english but it is fine in german.
# @Simon: Just by chance I know what this is for - it is merely against verisign's use of wildcard
# @Simon: entries (that lead to their own servers), right. Therefore, how about:
# @Simon:   "Behandle IP-Adr als NXDOMAIN (gegen Verisigns Platzhalter-Gebrauch)."
# @Simon: = "Treat ipaddr as NXDOMAIN (defeats Verisigns wildcard usage)." ?
# @Simon: But the explanatory(?) effect is only a very tiny bit better, I believe - what do U think? 
#: option.c:223
#, c-format
msgid "Specify the size of the cache in entries (defaults to %s)."
msgstr "Angabe der Größe des Caches in Einträgen (Voreinstellung: %s)."

#: option.c:224
#, c-format
msgid "Specify configuration file (defaults to %s)."
msgstr "Angabe der Konfigurationsdatei (Voreinstellung: %s)."

#: option.c:225
msgid "Do NOT fork into the background: run in debug mode."
msgstr "NICHT in den Hintergrund gehen: Betrieb im Debug-Modus"

# @Simon: = "DO NOT go into the background: Operation in debug-mode"
# @Simon: I know it sounds a bit clumsy in english, but "fork" would be hard to understand
# @Simon: and then I get a problem between "go" and "run" - so...
# @Simon: "Debug-mode" = "Fehlersuch-Modus", literally, but I think "Debug-Modus" is better :)
#: option.c:226
msgid "Do NOT forward queries with no domain part."
msgstr "Anfragen ohne Domänen-Teil NICHT weiterschicken"

# @Simon: "weiterschicken" is rather "pass on" (I hope) but that's the best I found.
#: option.c:227
msgid "Return self-pointing MX records for local hosts."
msgstr "Rückgabe auf sich selbst zeigender MX-Einträge für lokale Geräte"

# @Simon: "self-pointing" is a bit difficult, the meaning is clear but takes 3-4 words to express it in german.
# @Simon: "Geräte" is about "hard-devices". There is a word for "host" (it is "Wirt") but it would be misleading.
# @Simon: My online dict suggest "Rechner" (= Computer), but I think "hard-devices" is better because it's more general.
#: option.c:228
msgid "Expand simple names in /etc/hosts with domain-suffix."
msgstr "Erweitere einfache Namen in /etc/hosts mit der Domänen-Endung"

#: option.c:229
msgid "Don't forward spurious DNS requests from Windows hosts."
msgstr "'unechte' DNS-Anfragen von Windows-Rechnern nicht weiterleiten"

# @Simon: I'm a bit unsure about "spurious"
#: option.c:230
msgid "Enable DHCP in the range given with lease duration."
msgstr ""

#: option.c:231
#, c-format
msgid "Change to this group after startup (defaults to %s)."
msgstr ""

#: option.c:232
msgid "Set address or hostname for a specified machine."
msgstr ""

#: option.c:233
msgid "Read DHCP host specs from file"
msgstr ""

#: option.c:234
msgid "Read DHCP option specs from file"
msgstr ""

#: option.c:235
#, c-format
msgid "Do NOT load %s file."
msgstr ""

#: option.c:236
#, c-format
msgid "Specify a hosts file to be read in addition to %s."
msgstr ""

#: option.c:237
msgid "Specify interface(s) to listen on."
msgstr ""

#: option.c:238
msgid "Specify interface(s) NOT to listen on."
msgstr ""

#: option.c:239
msgid "Map DHCP user class to tag."
msgstr ""

#: option.c:240
msgid "Map RFC3046 circuit-id to tag."
msgstr ""

#: option.c:241
msgid "Map RFC3046 remote-id to tag."
msgstr ""

#: option.c:242
msgid "Map RFC3993 subscriber-id to tag."
msgstr ""

#: option.c:243
msgid "Don't do DHCP for hosts with tag set."
msgstr ""

#: option.c:244
msgid "Force broadcast replies for hosts with tag set."
msgstr ""

#: option.c:245
msgid "Do NOT fork into the background, do NOT run in debug mode."
msgstr ""

#: option.c:246
msgid "Assume we are the only DHCP server on the local network."
msgstr ""

#: option.c:247
#, c-format
msgid "Specify where to store DHCP leases (defaults to %s)."
msgstr ""

#: option.c:248
msgid "Return MX records for local hosts."
msgstr ""

#: option.c:249
msgid "Specify an MX record."
msgstr ""

#: option.c:250
msgid "Specify BOOTP options to DHCP server."
msgstr ""

#: option.c:251
#, c-format
msgid "Do NOT poll %s file, reload only on SIGHUP."
msgstr ""

#: option.c:252
msgid "Do NOT cache failed search results."
msgstr ""

#: option.c:253
#, c-format
msgid "Use nameservers strictly in the order given in %s."
msgstr ""

#: option.c:254
msgid "Specify options to be sent to DHCP clients."
msgstr ""

#: option.c:255
msgid "DHCP option sent even if the client does not request it."
msgstr ""

#: option.c:256
msgid "Specify port to listen for DNS requests on (defaults to 53)."
msgstr ""

#: option.c:257
#, c-format
msgid "Maximum supported UDP packet size for EDNS.0 (defaults to %s)."
msgstr ""

#: option.c:258
msgid "Log DNS queries."
msgstr ""

#: option.c:259
msgid "Force the originating port for upstream DNS queries."
msgstr ""

#: option.c:260
msgid "Do NOT read resolv.conf."
msgstr ""

#: option.c:261
#, c-format
msgid "Specify path to resolv.conf (defaults to %s)."
msgstr ""

#: option.c:262
msgid "Specify address(es) of upstream servers with optional domains."
msgstr ""

#: option.c:263
msgid "Never forward queries to specified domains."
msgstr ""

#: option.c:264
msgid "Specify the domain to be assigned in DHCP leases."
msgstr ""

#: option.c:265
msgid "Specify default target in an MX record."
msgstr ""

#: option.c:266
msgid "Specify time-to-live in seconds for replies from /etc/hosts."
msgstr ""

#: option.c:267
msgid "Specify time-to-live in seconds for negative caching."
msgstr ""

#: option.c:268
#, c-format
msgid "Change to this user after startup. (defaults to %s)."
msgstr ""

#: option.c:269
msgid "Map DHCP vendor class to tag."
msgstr ""

#: option.c:270
msgid "Display dnsmasq version and copyright information."
msgstr ""

#: option.c:271
msgid "Translate IPv4 addresses from upstream servers."
msgstr ""

#: option.c:272
msgid "Specify a SRV record."
msgstr ""

#: option.c:273
msgid "Display this message. Use --help dhcp for known DHCP options."
msgstr ""

#: option.c:274
#, fuzzy, c-format
msgid "Specify path of PID file (defaults to %s)."
msgstr "Angabe der Konfigurationsdatei (Voreinstellung: %s)."

#: option.c:275
#, c-format
msgid "Specify maximum number of DHCP leases (defaults to %s)."
msgstr ""

#: option.c:276
msgid "Answer DNS queries based on the interface a query was sent to."
msgstr ""

#: option.c:277
msgid "Specify TXT DNS record."
msgstr ""

#: option.c:278
msgid "Specify PTR DNS record."
msgstr ""

#: option.c:279
msgid "Give DNS name to IPv4 address of interface."
msgstr ""

#: option.c:280
msgid "Bind only to interfaces in use."
msgstr ""

#: option.c:281
#, c-format
msgid "Read DHCP static host information from %s."
msgstr ""

#: option.c:282
msgid "Enable the DBus interface for setting upstream servers, etc."
msgstr ""

#: option.c:283
msgid "Do not provide DHCP on this interface, only provide DNS."
msgstr ""

#: option.c:284
msgid "Enable dynamic address allocation for bootp."
msgstr ""

#: option.c:285
msgid "Map MAC address (with wildcards) to option set."
msgstr ""

#: option.c:287
msgid "Treat DHCP requests on aliases as arriving from interface."
msgstr ""

#: option.c:289
msgid "Disable ICMP echo address checking in the DHCP server."
msgstr ""

#: option.c:290
msgid "Script to run on DHCP lease creation and destruction."
msgstr ""

#: option.c:291
msgid "Read configuration from all the files in this directory."
msgstr ""

#: option.c:292
msgid "Log to this syslog facility or file. (defaults to DAEMON)"
msgstr ""

#: option.c:293
msgid "Do not use leasefile."
msgstr ""

#: option.c:294
#, c-format
msgid "Maximum number of concurrent DNS queries. (defaults to %s)"
msgstr ""

#: option.c:295
#, c-format
msgid "Clear DNS cache when reloading %s."
msgstr ""

#: option.c:296
msgid "Ignore hostnames provided by DHCP clients."
msgstr ""

#: option.c:297
msgid "Do NOT reuse filename and server fields for extra DHCP options."
msgstr ""

#: option.c:298
msgid "Enable integrated read-only TFTP server."
msgstr ""

#: option.c:299
msgid "Export files by TFTP only from the specified subtree."
msgstr ""

#: option.c:300
msgid "Add client IP address to tftp-root."
msgstr ""

#: option.c:301
msgid "Allow access only to files owned by the user running dnsmasq."
msgstr ""

#: option.c:302
#, c-format
msgid "Maximum number of conncurrent TFTP transfers (defaults to %s)."
msgstr ""

#: option.c:303
msgid "Disable the TFTP blocksize extension."
msgstr ""

#: option.c:304
msgid "Ephemeral port range for use by TFTP transfers."
msgstr ""

#: option.c:305
msgid "Extra logging for DHCP."
msgstr ""

#: option.c:306
msgid "Enable async. logging; optionally set queue length."
msgstr ""

#: option.c:307
msgid "Stop DNS rebinding. Filter private IP ranges when resolving."
msgstr ""

#: option.c:308
msgid "Always perform DNS queries to all servers."
msgstr ""

#: option.c:309
msgid "Set tag if client includes option in request."
msgstr ""

#: option.c:310
msgid "Use alternative ports for DHCP."
msgstr ""

#: option.c:311
msgid "Run lease-change script as this user."
msgstr ""

#: option.c:312
msgid "Specify NAPTR DNS record."
msgstr ""

#: option.c:313
msgid "Specify lowest port available for DNS query transmission."
msgstr ""

#: option.c:574
#, c-format
msgid ""
"Usage: dnsmasq [options]\n"
"\n"
msgstr ""

#: option.c:576
#, c-format
msgid "Use short options only on the command line.\n"
msgstr ""

#: option.c:578
#, c-format
msgid "Valid options are:\n"
msgstr ""

#: option.c:618
#, c-format
msgid "Known DHCP options:\n"
msgstr ""

#: option.c:691
msgid "bad dhcp-option"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: option.c:747
#, fuzzy
msgid "bad IP address"
msgstr "lese %s - %d Adressen"

#: option.c:845
msgid "bad domain in dhcp-option"
msgstr ""

#: option.c:903
msgid "dhcp-option too long"
msgstr ""

#: option.c:932
msgid "illegal repeated flag"
msgstr ""

#: option.c:940
msgid "illegal repeated keyword"
msgstr ""

#: option.c:974
#, c-format
msgid "cannot access directory %s: %s"
msgstr ""

#: option.c:993 tftp.c:348
#, c-format
msgid "cannot access %s: %s"
msgstr ""

#: option.c:1030
msgid "only one dhcp-hostsfile allowed"
msgstr ""

#: option.c:1037
msgid "only one dhcp-optsfile allowed"
msgstr ""

#: option.c:1081
msgid "bad MX preference"
msgstr ""

#: option.c:1085
msgid "bad MX name"
msgstr ""

#: option.c:1099
msgid "bad MX target"
msgstr ""

#: option.c:1110
msgid "cannot run scripts under uClinux"
msgstr ""

#: option.c:1303 option.c:1311
msgid "bad port"
msgstr ""

#: option.c:1331 option.c:1356
msgid "interface binding not supported"
msgstr ""

#: option.c:1474
msgid "bad port range"
msgstr ""

#: option.c:1491
msgid "bad bridge-interface"
msgstr ""

#: option.c:1532
msgid "bad dhcp-range"
msgstr ""

#: option.c:1558
msgid "only one netid tag allowed"
msgstr ""

#: option.c:1598
msgid "inconsistent DHCP range"
msgstr ""

#: option.c:1766
msgid "bad DHCP host name"
msgstr ""

#: option.c:1938 option.c:2181
msgid "invalid port number"
msgstr ""

#: option.c:2024
msgid "bad interface name"
msgstr ""

#: option.c:2044
msgid "bad PTR record"
msgstr ""

#: option.c:2074
msgid "bad NAPTR record"
msgstr ""

#: option.c:2100
msgid "TXT record string too long"
msgstr ""

#: option.c:2104
msgid "bad TXT record"
msgstr ""

#: option.c:2164
msgid "bad SRV record"
msgstr ""

#: option.c:2173
msgid "bad SRV target"
msgstr ""

#: option.c:2188
msgid "invalid priority"
msgstr ""

#: option.c:2195
msgid "invalid weight"
msgstr ""

#: option.c:2231
#, c-format
msgid "files nested too deep in %s"
msgstr ""

#: option.c:2239 tftp.c:503
#, c-format
msgid "cannot read %s: %s"
msgstr ""

#: option.c:2300
msgid "missing \""
msgstr ""

#: option.c:2347
msgid "bad option"
msgstr ""

#: option.c:2349
msgid "extraneous parameter"
msgstr ""

#: option.c:2351
msgid "missing parameter"
msgstr ""

#: option.c:2359
msgid "error"
msgstr ""

# @Simon: "Speicher nicht verfügbar" = "memory not available"
# @Simon: "could not get memory" = "konnte keinen Speicher bekommen" or "konnte Speicher nicht bekommen"
# @Simon: ("keinen Speicher" = "no memory", "... nicht bekommen" = "... not get") 
# @Simon: both would be correct - but would sound rather clumsy in german
# @Simon: how about "Nicht genügend Speicher verfügbar" = "Not enough memory available" ?
#: option.c:2365
#, c-format
msgid "%s at line %d of %%s"
msgstr "%s in Zeile %d von %%s"

#: option.c:2405 option.c:2435
#, c-format
msgid "read %s"
msgstr ""

#: option.c:2502
#, c-format
msgid "Dnsmasq version %s  %s\n"
msgstr ""

#: option.c:2503
#, c-format
msgid ""
"Compile time options %s\n"
"\n"
msgstr ""

#: option.c:2504
#, c-format
msgid "This software comes with ABSOLUTELY NO WARRANTY.\n"
msgstr ""

#: option.c:2505
#, c-format
msgid "Dnsmasq is free software, and you are welcome to redistribute it\n"
msgstr ""

#: option.c:2506
#, c-format
msgid "under the terms of the GNU General Public License, version 2 or 3.\n"
msgstr ""

#: option.c:2517
msgid "try --help"
msgstr ""

#: option.c:2519
msgid "try -w"
msgstr ""

#: option.c:2522
#, c-format
msgid "bad command line options: %s"
msgstr ""

#: option.c:2563
#, c-format
msgid "cannot get host-name: %s"
msgstr ""

#: option.c:2591
msgid "only one resolv.conf file allowed in no-poll mode."
msgstr ""

#: option.c:2601
msgid "must have exactly one resolv.conf to read domain from."
msgstr ""

#: option.c:2604 network.c:724
#, c-format
msgid "failed to read %s: %s"
msgstr ""

#: option.c:2622
#, c-format
msgid "no search directive found in %s"
msgstr ""

#: forward.c:405
#, c-format
msgid "nameserver %s refused to do a recursive query"
msgstr ""

#: forward.c:433
msgid "possible DNS-rebind attack detected"
msgstr ""

#: isc.c:77 dnsmasq.c:889
#, c-format
msgid "failed to access %s: %s"
msgstr ""

#: isc.c:93
#, c-format
msgid "failed to load %s: %s"
msgstr ""

#: isc.c:97 dnsmasq.c:911
#, c-format
msgid "reading %s"
msgstr ""

#: isc.c:119
#, c-format
msgid "bad name in %s"
msgstr ""

#: isc.c:181
#, c-format
msgid "Ignoring DHCP lease for %s because it has an illegal domain part"
msgstr ""

#: network.c:45
#, c-format
msgid "unknown interface %s in bridge-interface"
msgstr ""

#: network.c:389 dnsmasq.c:194
#, c-format
msgid "failed to create listening socket: %s"
msgstr ""

#: network.c:396
#, c-format
msgid "failed to set IPV6 options on listening socket: %s"
msgstr ""

#: network.c:415
#, c-format
msgid "failed to bind listening socket for %s: %s"
msgstr ""

#: network.c:420
#, c-format
msgid "failed to listen on socket: %s"
msgstr ""

#: network.c:432
#, c-format
msgid "failed to create TFTP socket: %s"
msgstr ""

#: network.c:631
#, c-format
msgid "failed to bind server socket for %s: %s"
msgstr ""

#: network.c:664
#, c-format
msgid "ignoring nameserver %s - local interface"
msgstr ""

#: network.c:675
#, c-format
msgid "ignoring nameserver %s - cannot make/bind socket: %s"
msgstr ""

#: network.c:690
msgid "unqualified"
msgstr ""

#: network.c:690
msgid "names"
msgstr ""

#: network.c:692
msgid "default"
msgstr ""

#: network.c:694
msgid "domain"
msgstr ""

#: network.c:697
#, c-format
msgid "using local addresses only for %s %s"
msgstr ""

#: network.c:699
#, c-format
msgid "using nameserver %s#%d for %s %s"
msgstr ""

#: network.c:702
#, c-format
msgid "using nameserver %s#%d(via %s)"
msgstr ""

#: network.c:704
#, c-format
msgid "using nameserver %s#%d"
msgstr ""

#: dnsmasq.c:122
msgid "ISC dhcpd integration not available: set HAVE_ISC_READER in src/config.h"
msgstr ""

#: dnsmasq.c:144
msgid "TFTP server not available: set HAVE_TFTP in src/config.h"
msgstr ""

#: dnsmasq.c:149
msgid "asychronous logging is not available under Solaris"
msgstr ""

#: dnsmasq.c:165
msgid "must set exactly one interface on broken systems without IP_RECVIF"
msgstr ""

#: dnsmasq.c:175
#, c-format
msgid "failed to find list of interfaces: %s"
msgstr ""

#: dnsmasq.c:183
#, c-format
msgid "unknown interface %s"
msgstr ""

#: dnsmasq.c:189
#, c-format
msgid "no interface with address %s"
msgstr ""

#: dnsmasq.c:206 dnsmasq.c:663
#, c-format
msgid "DBus error: %s"
msgstr ""

#: dnsmasq.c:209
msgid "DBus not available: set HAVE_DBUS in src/config.h"
msgstr ""

#: dnsmasq.c:233
#, c-format
msgid "unknown user or group: %s"
msgstr ""

#: dnsmasq.c:290
#, c-format
msgid "cannot chdir to filesystem root: %s"
msgstr ""

#: dnsmasq.c:302
#, c-format
msgid "cannot fork into background: %s"
msgstr ""

#: dnsmasq.c:451
#, c-format
msgid "started, version %s DNS disabled"
msgstr ""

#: dnsmasq.c:453
#, c-format
msgid "started, version %s cachesize %d"
msgstr ""

#: dnsmasq.c:455
#, c-format
msgid "started, version %s cache disabled"
msgstr ""

#: dnsmasq.c:457
#, c-format
msgid "compile time options: %s"
msgstr ""

#: dnsmasq.c:463
msgid "DBus support enabled: connected to system bus"
msgstr ""

#: dnsmasq.c:465
msgid "DBus support enabled: bus connection pending"
msgstr ""

#: dnsmasq.c:470
#, c-format
msgid "warning: failed to change owner of %s: %s"
msgstr ""

#: dnsmasq.c:474
msgid "setting --bind-interfaces option because of OS limitations"
msgstr ""

#: dnsmasq.c:479
#, c-format
msgid "warning: interface %s does not currently exist"
msgstr ""

#: dnsmasq.c:484
msgid "warning: ignoring resolv-file flag because no-resolv is set"
msgstr ""

#: dnsmasq.c:487
msgid "warning: no upstream servers configured"
msgstr ""

#: dnsmasq.c:491
#, c-format
msgid "asynchronous logging enabled, queue limit is %d messages"
msgstr ""

#: dnsmasq.c:503
#, c-format
msgid "DHCP, static leases only on %.0s%s, lease time %s"
msgstr ""

#: dnsmasq.c:504
#, c-format
msgid "DHCP, IP range %s -- %s, lease time %s"
msgstr ""

#: dnsmasq.c:518
msgid "root is "
msgstr ""

#: dnsmasq.c:518
msgid "enabled"
msgstr ""

#: dnsmasq.c:520
msgid "secure mode"
msgstr ""

#: dnsmasq.c:546
#, c-format
msgid "restricting maximum simultaneous TFTP transfers to %d"
msgstr ""

#: dnsmasq.c:665
msgid "connected to system DBus"
msgstr ""

#: dnsmasq.c:753
#, c-format
msgid "failed to create helper: %s"
msgstr ""

#: dnsmasq.c:756
#, c-format
msgid "setting capabilities failed: %s"
msgstr ""

#: dnsmasq.c:760
#, c-format
msgid "failed to change user-id to %s: %s"
msgstr ""

#: dnsmasq.c:765
#, c-format
msgid "failed to change group-id to %s: %s"
msgstr ""

#: dnsmasq.c:768
#, c-format
msgid "failed to open pidfile %s: %s"
msgstr ""

#: dnsmasq.c:771
#, c-format
msgid "cannot open %s: %s"
msgstr ""

#: dnsmasq.c:822
#, c-format
msgid "child process killed by signal %d"
msgstr ""

#: dnsmasq.c:826
#, c-format
msgid "child process exited with status %d"
msgstr ""

#: dnsmasq.c:830
#, c-format
msgid "failed to execute %s: %s"
msgstr ""

#: dnsmasq.c:871
msgid "exiting on receipt of SIGTERM"
msgstr ""

#: dnsmasq.c:922
#, c-format
msgid "no servers found in %s, will retry"
msgstr ""

#: dhcp.c:38
#, c-format
msgid "cannot create DHCP socket : %s"
msgstr ""

#: dhcp.c:50
#, c-format
msgid "failed to set options on DHCP socket: %s"
msgstr ""

#: dhcp.c:68
#, c-format
msgid "failed to set SO_REUSE{ADDR|PORT} on DHCP socket: %s"
msgstr ""

#: dhcp.c:81
#, c-format
msgid "failed to bind DHCP server socket: %s"
msgstr ""

#: dhcp.c:94
#, c-format
msgid "cannot create ICMP raw socket: %s."
msgstr ""

#: dhcp.c:223
#, c-format
msgid "DHCP packet received on %s which has no address"
msgstr ""

#: dhcp.c:382
#, c-format
msgid "DHCP range %s -- %s is not consistent with netmask %s"
msgstr ""

#: dhcp.c:709
#, c-format
msgid "failed to read %s:%s"
msgstr ""

#: dhcp.c:744
#, c-format
msgid "bad line at %s line %d"
msgstr ""

#: dhcp.c:847
#, c-format
msgid "duplicate IP address %s in dhcp-config directive."
msgstr ""

#: dhcp.c:850
#, c-format
msgid "duplicate IP address %s in %s."
msgstr ""

#: dhcp.c:858
#, c-format
msgid "illegal domain %s in dhcp-config directive."
msgstr ""

#: dhcp.c:860
#, c-format
msgid "illegal domain %s in %s."
msgstr ""

#: dhcp.c:899
#, c-format
msgid "%s has more than one address in hostsfile, using %s for DHCP"
msgstr ""

#: dhcp.c:904
#, c-format
msgid "duplicate IP address %s (%s) in dhcp-config directive"
msgstr ""

#: lease.c:58
#, c-format
msgid "cannot open or create lease file %s: %s"
msgstr ""

#: lease.c:84
msgid "too many stored leases"
msgstr ""

#: lease.c:125
#, c-format
msgid "cannot run lease-init script %s: %s"
msgstr ""

#: lease.c:131
#, c-format
msgid "lease-init script returned exit code %s"
msgstr ""

#: lease.c:238
#, c-format
msgid "failed to write %s: %s (retry in %us)"
msgstr ""

#: rfc2131.c:310
#, c-format
msgid "no address range available for DHCP request %s %s"
msgstr ""

#: rfc2131.c:311
msgid "with subnet selector"
msgstr ""

#: rfc2131.c:311
msgid "via"
msgstr ""

#: rfc2131.c:322
#, c-format
msgid "DHCP packet: transaction-id is %u"
msgstr ""

#: rfc2131.c:327
#, c-format
msgid "Available DHCP subnet: %s/%s"
msgstr ""

#: rfc2131.c:329
#, c-format
msgid "Available DHCP range: %s -- %s"
msgstr ""

#: rfc2131.c:357 rfc2131.c:388
msgid "disabled"
msgstr ""

#: rfc2131.c:400 rfc2131.c:892
msgid "address in use"
msgstr ""

#: rfc2131.c:403
msgid "no address configured"
msgstr ""

#: rfc2131.c:416 rfc2131.c:747
msgid "no address available"
msgstr ""

#: rfc2131.c:425 rfc2131.c:902
msgid "no leases left"
msgstr ""

#: rfc2131.c:428 rfc2131.c:866
msgid "wrong network"
msgstr ""

#: rfc2131.c:530
#, c-format
msgid "Ignoring domain %s for DHCP host name %s"
msgstr ""

#: rfc2131.c:624
#, c-format
msgid "Vendor class: %s"
msgstr ""

#: rfc2131.c:626
#, c-format
msgid "User class: %s"
msgstr ""

#: rfc2131.c:667
#, c-format
msgid "disabling DHCP static address %s for %s"
msgstr ""

#: rfc2131.c:688
msgid "unknown lease"
msgstr ""

#: rfc2131.c:697 rfc2131.c:1018
msgid "ignored"
msgstr ""

#: rfc2131.c:718
#, c-format
msgid "not using configured address %s because it is leased to %s"
msgstr ""

#: rfc2131.c:728
#, c-format
msgid "not using configured address %s because it is in use by the server or relay"
msgstr ""

#: rfc2131.c:731
#, c-format
msgid "not using configured address %s because it was previously declined"
msgstr ""

#: rfc2131.c:745 rfc2131.c:895
msgid "no unique-id"
msgstr ""

#: rfc2131.c:825
msgid "wrong address"
msgstr ""

#: rfc2131.c:842
msgid "lease not found"
msgstr ""

#: rfc2131.c:874
msgid "address not available"
msgstr ""

#: rfc2131.c:885
msgid "static lease available"
msgstr ""

#: rfc2131.c:889
msgid "address reserved"
msgstr ""

#: rfc2131.c:1307
#, c-format
msgid "tags: %s"
msgstr ""

#: rfc2131.c:1394
#, c-format
msgid "cannot send DHCP/BOOTP option %d: no space left in packet"
msgstr ""

#: rfc2131.c:1564
#, c-format
msgid "requested options: %s"
msgstr ""

#: rfc2131.c:1613
#, c-format
msgid "next server: %s"
msgstr ""

#: rfc2131.c:1637
#, c-format
msgid "bootfile name: %s"
msgstr ""

#: rfc2131.c:1640
#, c-format
msgid "server name: %s"
msgstr ""

#: netlink.c:63
#, c-format
msgid "cannot create netlink socket: %s"
msgstr ""

#: netlink.c:230
#, c-format
msgid "netlink returns error: %s"
msgstr ""

#: dbus.c:115
msgid "attempt to set an IPv6 server address via DBus - no IPv6 support"
msgstr ""

#: dbus.c:243
msgid "setting upstream servers from DBus"
msgstr ""

#: dbus.c:281
msgid "could not register a DBus message handler"
msgstr ""

#: bpf.c:146
#, c-format
msgid "cannot create DHCP BPF socket: %s"
msgstr ""

#: bpf.c:174
#, c-format
msgid "DHCP request for unsupported hardware type (%d) received on %s"
msgstr ""

#: tftp.c:175
msgid "unable to get free port for TFTP"
msgstr ""

#: tftp.c:190
#, c-format
msgid "unsupported request from %s"
msgstr ""

#: tftp.c:271
#, c-format
msgid "TFTP sent %s to %s"
msgstr ""

#: tftp.c:294
#, c-format
msgid "file %s not found"
msgstr ""

#: tftp.c:405
#, c-format
msgid "TFTP error %d %s received from %s"
msgstr ""

#: tftp.c:436
#, c-format
msgid "TFTP failed sending %s to %s"
msgstr ""

#: log.c:169
#, c-format
msgid "overflow: %d log entries lost"
msgstr ""

#: log.c:246
#, c-format
msgid "log failed: %s"
msgstr ""

# @Simon: I would like to have an example :) - instead of "von" it would be possible to use "aus",
# @Simon: both translate to "of" and nothing else, but depending on the sense one could be better 
# @Simon: than the other.
#: log.c:402
msgid "FAILED to start up"
msgstr "Start gescheitert"

# @Simon: Here I need an example to understand it :)
#, fuzzy
#~ msgid "read %s - %d hosts"
#~ msgstr "lese %s - %d Adressen"