po/de.po

# German translations for dnsmasq package.
# This file is put in the public domain.
# Simon Kelley <simon@thekelleys.org.uk>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: dnsmasq 2.24\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-02-02 14:07+0000\n"
"PO-Revision-Date: 2005-09-27 09:37+0100\n"
"Last-Translator: Simon Kelley <simon@thekelleys.org.uk>\n"
"Language-Team: German <de@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: cache.c:761
#, c-format
msgid "failed to load names from %s: %s"
msgstr ""

#: cache.c:795 dhcp.c:780
#, c-format
msgid "bad address at %s line %d"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: cache.c:850 dhcp.c:794
#, c-format
msgid "bad name at %s line %d"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: cache.c:857 dhcp.c:860
#, c-format
msgid "read %s - %d addresses"
msgstr "lese %s - %d Adressen"

# @Simon: 'lese' is present, is that ok? If it should be past, it would be
# @Simon: "gelesen: %s - %d Adressen" - note the colon, it's a must, then.
#: cache.c:895
msgid "cleared cache"
msgstr "Cache geleert"

# @Simon: "Cache geleert" is literally "Cache emptied" but I think other translations could be misleading
# @Simon: (I don't know a good german replacement for "Cache" but AFAIK "Cache" is common in german)
#: cache.c:942
#, c-format
msgid "not giving name %s to the DHCP lease of %s because the name exists in %s with address %s"
msgstr "Name %s wurde nicht dem DHCP 'Mieter' von %s zugewiesen, da der Name in %smit der Adresse %s bereits existiert"

#: cache.c:1018
#, c-format
msgid "time %lu"
msgstr ""

# @Simon: "Mieter" is rather 'logder, renter, tenant, lessee' but I couldn't find anything that fits better.
# @Simon: So I thought I put it in ''-marks :)
#: cache.c:1019
#, fuzzy, c-format
msgid "cache size %d, %d/%d cache insertions re-used unexpired cache entries."
msgstr "Cache Größe %d, %d/%d Cache-Einfügungen verwendeten nicht abgelaufene Cache-Einträge wieder."

#: cache.c:1021
#, c-format
msgid "queries forwarded %u, queries answered locally %u"
msgstr ""

#: cache.c:1044
#, c-format
msgid "server %s#%d: queries sent %u, retried or failed %u"
msgstr ""

#: util.c:56
#, c-format
msgid "failed to seed the random number generator: %s"
msgstr ""

# @Simon: "re-used" = "wiederverwenden", but in such a case it must be split apart to "verwendet ... wieder"
# @Simon: "unexpired" = "nicht abgelaufen" (expired=abgelaufen) -- altogether it sounds complicated in german,
# @Simon: I would prefer to use "noch gültige" = "still valid", would that fit to the sense? Then it would be:
# @Simon: msgstr "Cache Größe %d, %d/%d Cache-Einfügungen verwendeten noch gültige Cache-Einträge wieder."
# @Simon: btw, what is the "%d/%d"-part?
#: util.c:164
msgid "could not get memory"
msgstr "Speicher nicht verfügbar"

#: util.c:174
#, c-format
msgid "cannot create pipe: %s"
msgstr ""

#: util.c:182
#, c-format
msgid "failed to allocate %d bytes"
msgstr ""

# @Simon: not perfect but I cannot get nearer right now.
#: util.c:287
#, c-format
msgid "infinite"
msgstr "unendlich"

#: option.c:223
msgid "Specify local address(es) to listen on."
msgstr "Lokale abzuhörende Adresse(n) angeben."

# @Simon: Quite literal translation, sounds not too polite in german.
# @Simon: How about: "Bitte die lokalen abzuhörende Adresse(n) angeben."
# @Simon: = "Please specify the local address(es) to listen on."
#: option.c:224
msgid "Return ipaddr for all hosts in specified domains."
msgstr "Rückkehr-IP-Adresse für alle Geräte in angebenen Domänen"

# @Simon: I hope "Return ipaddr" is similar to "Return-ipaddr" and not "Return the ipaddr ... !"
#: option.c:225
msgid "Fake reverse lookups for RFC1918 private address ranges."
msgstr "'Gefälschte' Rückwärts-Ergebnisse für private Adressbereiche nach RFC1918"

# @Simon: I'm a bit unsure about the meaning of "Fake" here, and the best word for "lookup" is "Nachsehen" 
# @Simon: (that is "looking-for") but I think that cannot be used. "Ergebnisse" = "results", is that near enough?
#: option.c:226
msgid "Treat ipaddr as NXDOMAIN (defeats Verisign wildcard)."
msgstr "Behandle IP-Adr als NXDOMAIN (wehrt Verisign-Platzhalter ab)."

# @Simon: or "Behandle IP-Adr als NXDOMAIN (gegen Verisign-Platzhalter)."
# @Simon: "gegen" = "against", I believe that might be clumsy in english but it is fine in german.
# @Simon: Just by chance I know what this is for - it is merely against verisign's use of wildcard
# @Simon: entries (that lead to their own servers), right. Therefore, how about:
# @Simon:   "Behandle IP-Adr als NXDOMAIN (gegen Verisigns Platzhalter-Gebrauch)."
# @Simon: = "Treat ipaddr as NXDOMAIN (defeats Verisigns wildcard usage)." ?
# @Simon: But the explanatory(?) effect is only a very tiny bit better, I believe - what do U think? 
#: option.c:227
#, c-format
msgid "Specify the size of the cache in entries (defaults to %s)."
msgstr "Angabe der Größe des Caches in Einträgen (Voreinstellung: %s)."

#: option.c:228
#, c-format
msgid "Specify configuration file (defaults to %s)."
msgstr "Angabe der Konfigurationsdatei (Voreinstellung: %s)."

#: option.c:229
msgid "Do NOT fork into the background: run in debug mode."
msgstr "NICHT in den Hintergrund gehen: Betrieb im Debug-Modus"

# @Simon: = "DO NOT go into the background: Operation in debug-mode"
# @Simon: I know it sounds a bit clumsy in english, but "fork" would be hard to understand
# @Simon: and then I get a problem between "go" and "run" - so...
# @Simon: "Debug-mode" = "Fehlersuch-Modus", literally, but I think "Debug-Modus" is better :)
#: option.c:230
msgid "Do NOT forward queries with no domain part."
msgstr "Anfragen ohne Domänen-Teil NICHT weiterschicken"

# @Simon: "weiterschicken" is rather "pass on" (I hope) but that's the best I found.
#: option.c:231
msgid "Return self-pointing MX records for local hosts."
msgstr "Rückgabe auf sich selbst zeigender MX-Einträge für lokale Geräte"

# @Simon: "self-pointing" is a bit difficult, the meaning is clear but takes 3-4 words to express it in german.
# @Simon: "Geräte" is about "hard-devices". There is a word for "host" (it is "Wirt") but it would be misleading.
# @Simon: My online dict suggest "Rechner" (= Computer), but I think "hard-devices" is better because it's more general.
#: option.c:232
msgid "Expand simple names in /etc/hosts with domain-suffix."
msgstr "Erweitere einfache Namen in /etc/hosts mit der Domänen-Endung"

#: option.c:233
msgid "Don't forward spurious DNS requests from Windows hosts."
msgstr "'unechte' DNS-Anfragen von Windows-Rechnern nicht weiterleiten"

# @Simon: I'm a bit unsure about "spurious"
#: option.c:234
msgid "Enable DHCP in the range given with lease duration."
msgstr ""

#: option.c:235
#, c-format
msgid "Change to this group after startup (defaults to %s)."
msgstr ""

#: option.c:236
msgid "Set address or hostname for a specified machine."
msgstr ""

#: option.c:237
msgid "Read DHCP host specs from file"
msgstr ""

#: option.c:238
msgid "Read DHCP option specs from file"
msgstr ""

#: option.c:239
#, c-format
msgid "Do NOT load %s file."
msgstr ""

#: option.c:240
#, c-format
msgid "Specify a hosts file to be read in addition to %s."
msgstr ""

#: option.c:241
msgid "Specify interface(s) to listen on."
msgstr ""

#: option.c:242
msgid "Specify interface(s) NOT to listen on."
msgstr ""

#: option.c:243
msgid "Map DHCP user class to tag."
msgstr ""

#: option.c:244
msgid "Map RFC3046 circuit-id to tag."
msgstr ""

#: option.c:245
msgid "Map RFC3046 remote-id to tag."
msgstr ""

#: option.c:246
msgid "Map RFC3993 subscriber-id to tag."
msgstr ""

#: option.c:247
msgid "Don't do DHCP for hosts with tag set."
msgstr ""

#: option.c:248
msgid "Force broadcast replies for hosts with tag set."
msgstr ""

#: option.c:249
msgid "Do NOT fork into the background, do NOT run in debug mode."
msgstr ""

#: option.c:250
msgid "Assume we are the only DHCP server on the local network."
msgstr ""

#: option.c:251
#, c-format
msgid "Specify where to store DHCP leases (defaults to %s)."
msgstr ""

#: option.c:252
msgid "Return MX records for local hosts."
msgstr ""

#: option.c:253
msgid "Specify an MX record."
msgstr ""

#: option.c:254
msgid "Specify BOOTP options to DHCP server."
msgstr ""

#: option.c:255
#, c-format
msgid "Do NOT poll %s file, reload only on SIGHUP."
msgstr ""

#: option.c:256
msgid "Do NOT cache failed search results."
msgstr ""

#: option.c:257
#, c-format
msgid "Use nameservers strictly in the order given in %s."
msgstr ""

#: option.c:258
msgid "Specify options to be sent to DHCP clients."
msgstr ""

#: option.c:259
msgid "DHCP option sent even if the client does not request it."
msgstr ""

#: option.c:260
msgid "Specify port to listen for DNS requests on (defaults to 53)."
msgstr ""

#: option.c:261
#, c-format
msgid "Maximum supported UDP packet size for EDNS.0 (defaults to %s)."
msgstr ""

#: option.c:262
msgid "Log DNS queries."
msgstr ""

#: option.c:263
msgid "Force the originating port for upstream DNS queries."
msgstr ""

#: option.c:264
msgid "Do NOT read resolv.conf."
msgstr ""

#: option.c:265
#, c-format
msgid "Specify path to resolv.conf (defaults to %s)."
msgstr ""

#: option.c:266
msgid "Specify address(es) of upstream servers with optional domains."
msgstr ""

#: option.c:267
msgid "Never forward queries to specified domains."
msgstr ""

#: option.c:268
msgid "Specify the domain to be assigned in DHCP leases."
msgstr ""

#: option.c:269
msgid "Specify default target in an MX record."
msgstr ""

#: option.c:270
msgid "Specify time-to-live in seconds for replies from /etc/hosts."
msgstr ""

#: option.c:271
msgid "Specify time-to-live in seconds for negative caching."
msgstr ""

#: option.c:272
#, c-format
msgid "Change to this user after startup. (defaults to %s)."
msgstr ""

#: option.c:273
msgid "Map DHCP vendor class to tag."
msgstr ""

#: option.c:274
msgid "Display dnsmasq version and copyright information."
msgstr ""

#: option.c:275
msgid "Translate IPv4 addresses from upstream servers."
msgstr ""

#: option.c:276
msgid "Specify a SRV record."
msgstr ""

#: option.c:277
msgid "Display this message. Use --help dhcp for known DHCP options."
msgstr ""

#: option.c:278
#, fuzzy, c-format
msgid "Specify path of PID file (defaults to %s)."
msgstr "Angabe der Konfigurationsdatei (Voreinstellung: %s)."

#: option.c:279
#, c-format
msgid "Specify maximum number of DHCP leases (defaults to %s)."
msgstr ""

#: option.c:280
msgid "Answer DNS queries based on the interface a query was sent to."
msgstr ""

#: option.c:281
msgid "Specify TXT DNS record."
msgstr ""

#: option.c:282
msgid "Specify PTR DNS record."
msgstr ""

#: option.c:283
msgid "Give DNS name to IPv4 address of interface."
msgstr ""

#: option.c:284
msgid "Bind only to interfaces in use."
msgstr ""

#: option.c:285
#, c-format
msgid "Read DHCP static host information from %s."
msgstr ""

#: option.c:286
msgid "Enable the DBus interface for setting upstream servers, etc."
msgstr ""

#: option.c:287
msgid "Do not provide DHCP on this interface, only provide DNS."
msgstr ""

#: option.c:288
msgid "Enable dynamic address allocation for bootp."
msgstr ""

#: option.c:289
msgid "Map MAC address (with wildcards) to option set."
msgstr ""

#: option.c:291
msgid "Treat DHCP requests on aliases as arriving from interface."
msgstr ""

#: option.c:293
msgid "Disable ICMP echo address checking in the DHCP server."
msgstr ""

#: option.c:294
msgid "Script to run on DHCP lease creation and destruction."
msgstr ""

#: option.c:295
msgid "Read configuration from all the files in this directory."
msgstr ""

#: option.c:296
msgid "Log to this syslog facility or file. (defaults to DAEMON)"
msgstr ""

#: option.c:297
msgid "Do not use leasefile."
msgstr ""

#: option.c:298
#, c-format
msgid "Maximum number of concurrent DNS queries. (defaults to %s)"
msgstr ""

#: option.c:299
#, c-format
msgid "Clear DNS cache when reloading %s."
msgstr ""

#: option.c:300
msgid "Ignore hostnames provided by DHCP clients."
msgstr ""

#: option.c:301
msgid "Do NOT reuse filename and server fields for extra DHCP options."
msgstr ""

#: option.c:302
msgid "Enable integrated read-only TFTP server."
msgstr ""

#: option.c:303
msgid "Export files by TFTP only from the specified subtree."
msgstr ""

#: option.c:304
msgid "Add client IP address to tftp-root."
msgstr ""

#: option.c:305
msgid "Allow access only to files owned by the user running dnsmasq."
msgstr ""

#: option.c:306
#, c-format
msgid "Maximum number of conncurrent TFTP transfers (defaults to %s)."
msgstr ""

#: option.c:307
msgid "Disable the TFTP blocksize extension."
msgstr ""

#: option.c:308
msgid "Ephemeral port range for use by TFTP transfers."
msgstr ""

#: option.c:309
msgid "Extra logging for DHCP."
msgstr ""

#: option.c:310
msgid "Enable async. logging; optionally set queue length."
msgstr ""

#: option.c:311
msgid "Stop DNS rebinding. Filter private IP ranges when resolving."
msgstr ""

#: option.c:312
msgid "Always perform DNS queries to all servers."
msgstr ""

#: option.c:313
msgid "Set tag if client includes matching option in request."
msgstr ""

#: option.c:314
msgid "Use alternative ports for DHCP."
msgstr ""

#: option.c:315
msgid "Run lease-change script as this user."
msgstr ""

#: option.c:316
msgid "Specify NAPTR DNS record."
msgstr ""

#: option.c:317
msgid "Specify lowest port available for DNS query transmission."
msgstr ""

#: option.c:318
msgid "Use only fully qualified domain names for DHCP clients."
msgstr ""

#: option.c:319
msgid "Specify alias name for LOCAL DNS name."
msgstr ""

#: option.c:589
#, c-format
msgid ""
"Usage: dnsmasq [options]\n"
"\n"
msgstr ""

#: option.c:591
#, c-format
msgid "Use short options only on the command line.\n"
msgstr ""

#: option.c:593
#, c-format
msgid "Valid options are:\n"
msgstr ""

#: option.c:633
#, c-format
msgid "Known DHCP options:\n"
msgstr ""

#: option.c:710
msgid "bad dhcp-option"
msgstr ""

# @Simon: Here I need an example to understand it :)
#: option.c:767
#, fuzzy
msgid "bad IP address"
msgstr "lese %s - %d Adressen"

#: option.c:865
msgid "bad domain in dhcp-option"
msgstr ""

#: option.c:923
msgid "dhcp-option too long"
msgstr ""

#: option.c:932
msgid "illegal dhcp-match"
msgstr ""

#: option.c:967
msgid "illegal repeated flag"
msgstr ""

#: option.c:975
msgid "illegal repeated keyword"
msgstr ""

#: option.c:1012
#, c-format
msgid "cannot access directory %s: %s"
msgstr ""

#: option.c:1031 tftp.c:348
#, c-format
msgid "cannot access %s: %s"
msgstr ""

#: option.c:1069
msgid "only one dhcp-hostsfile allowed"
msgstr ""

#: option.c:1076
msgid "only one dhcp-optsfile allowed"
msgstr ""

#: option.c:1120
msgid "bad MX preference"
msgstr ""

#: option.c:1124
msgid "bad MX name"
msgstr ""

#: option.c:1138
msgid "bad MX target"
msgstr ""

#: option.c:1149
msgid "cannot run scripts under uClinux"
msgstr ""

#: option.c:1375 option.c:1379
msgid "bad port"
msgstr ""

#: option.c:1398 option.c:1423
msgid "interface binding not supported"
msgstr ""

#: option.c:1541
msgid "bad port range"
msgstr ""

#: option.c:1558
msgid "bad bridge-interface"
msgstr ""

#: option.c:1599
msgid "bad dhcp-range"
msgstr ""

#: option.c:1625
msgid "only one netid tag allowed"
msgstr ""

#: option.c:1665
msgid "inconsistent DHCP range"
msgstr ""

#: option.c:1837
msgid "bad DHCP host name"
msgstr ""

#: option.c:2012 option.c:2283
msgid "invalid port number"
msgstr ""

#: option.c:2094
msgid "invalid alias range"
msgstr ""

#: option.c:2106
msgid "bad interface name"
msgstr ""

#: option.c:2129
msgid "duplicate CNAME"
msgstr ""

#: option.c:2146
msgid "bad PTR record"
msgstr ""

#: option.c:2176
msgid "bad NAPTR record"
msgstr ""

#: option.c:2202
msgid "TXT record string too long"
msgstr ""

#: option.c:2206
msgid "bad TXT record"
msgstr ""

#: option.c:2266
msgid "bad SRV record"
msgstr ""

#: option.c:2275
msgid "bad SRV target"
msgstr ""

#: option.c:2290
msgid "invalid priority"
msgstr ""

#: option.c:2297
msgid "invalid weight"
msgstr ""

#: option.c:2333
#, c-format
msgid "files nested too deep in %s"
msgstr ""

#: option.c:2341 tftp.c:503
#, c-format
msgid "cannot read %s: %s"
msgstr ""

#: option.c:2402
msgid "missing \""
msgstr ""

#: option.c:2449
msgid "bad option"
msgstr ""

#: option.c:2451
msgid "extraneous parameter"
msgstr ""

#: option.c:2453
msgid "missing parameter"
msgstr ""

#: option.c:2461
msgid "error"
msgstr ""

# @Simon: "Speicher nicht verfügbar" = "memory not available"
# @Simon: "could not get memory" = "konnte keinen Speicher bekommen" or "konnte Speicher nicht bekommen"
# @Simon: ("keinen Speicher" = "no memory", "... nicht bekommen" = "... not get") 
# @Simon: both would be correct - but would sound rather clumsy in german
# @Simon: how about "Nicht genügend Speicher verfügbar" = "Not enough memory available" ?
#: option.c:2467
#, c-format
msgid "%s at line %d of %%s"
msgstr "%s in Zeile %d von %%s"

#: option.c:2515 option.c:2546
#, c-format
msgid "read %s"
msgstr ""

#: option.c:2613
#, c-format
msgid "Dnsmasq version %s  %s\n"
msgstr ""

#: option.c:2614
#, c-format
msgid ""
"Compile time options %s\n"
"\n"
msgstr ""

#: option.c:2615
#, c-format
msgid "This software comes with ABSOLUTELY NO WARRANTY.\n"
msgstr ""

#: option.c:2616
#, c-format
msgid "Dnsmasq is free software, and you are welcome to redistribute it\n"
msgstr ""

#: option.c:2617
#, c-format
msgid "under the terms of the GNU General Public License, version 2 or 3.\n"
msgstr ""

#: option.c:2628
msgid "try --help"
msgstr ""

#: option.c:2630
msgid "try -w"
msgstr ""

#: option.c:2633
#, c-format
msgid "bad command line options: %s"
msgstr ""

#: option.c:2674
#, c-format
msgid "cannot get host-name: %s"
msgstr ""

#: option.c:2702
msgid "only one resolv.conf file allowed in no-poll mode."
msgstr ""

#: option.c:2712
msgid "must have exactly one resolv.conf to read domain from."
msgstr ""

#: option.c:2715 network.c:730
#, c-format
msgid "failed to read %s: %s"
msgstr ""

#: option.c:2733
#, c-format
msgid "no search directive found in %s"
msgstr ""

#: option.c:2754
msgid "there must be a default domain when --dhcp-fqdn is set"
msgstr ""

#: forward.c:405
#, c-format
msgid "nameserver %s refused to do a recursive query"
msgstr ""

#: forward.c:433
msgid "possible DNS-rebind attack detected"
msgstr ""

#: network.c:45
#, c-format
msgid "unknown interface %s in bridge-interface"
msgstr ""

#: network.c:393 dnsmasq.c:186
#, c-format
msgid "failed to create listening socket: %s"
msgstr ""

#: network.c:400
#, c-format
msgid "failed to set IPV6 options on listening socket: %s"
msgstr ""

#: network.c:426
#, c-format
msgid "failed to bind listening socket for %s: %s"
msgstr ""

#: network.c:431
#, c-format
msgid "failed to listen on socket: %s"
msgstr ""

#: network.c:443
#, c-format
msgid "failed to create TFTP socket: %s"
msgstr ""

#: network.c:637
#, c-format
msgid "failed to bind server socket for %s: %s"
msgstr ""

#: network.c:670
#, c-format
msgid "ignoring nameserver %s - local interface"
msgstr ""

#: network.c:681
#, c-format
msgid "ignoring nameserver %s - cannot make/bind socket: %s"
msgstr ""

#: network.c:696
msgid "unqualified"
msgstr ""

#: network.c:696
msgid "names"
msgstr ""

#: network.c:698
msgid "default"
msgstr ""

#: network.c:700
msgid "domain"
msgstr ""

#: network.c:703
#, c-format
msgid "using local addresses only for %s %s"
msgstr ""

#: network.c:705
#, c-format
msgid "using nameserver %s#%d for %s %s"
msgstr ""

#: network.c:708
#, c-format
msgid "using nameserver %s#%d(via %s)"
msgstr ""

#: network.c:710
#, c-format
msgid "using nameserver %s#%d"
msgstr ""

#: dnsmasq.c:136
msgid "TFTP server not available: set HAVE_TFTP in src/config.h"
msgstr ""

#: dnsmasq.c:141
msgid "asychronous logging is not available under Solaris"
msgstr ""

#: dnsmasq.c:157
msgid "must set exactly one interface on broken systems without IP_RECVIF"
msgstr ""

#: dnsmasq.c:167
#, c-format
msgid "failed to find list of interfaces: %s"
msgstr ""

#: dnsmasq.c:175
#, c-format
msgid "unknown interface %s"
msgstr ""

#: dnsmasq.c:181
#, c-format
msgid "no interface with address %s"
msgstr ""

#: dnsmasq.c:198 dnsmasq.c:652
#, c-format
msgid "DBus error: %s"
msgstr ""

#: dnsmasq.c:201
msgid "DBus not available: set HAVE_DBUS in src/config.h"
msgstr ""

#: dnsmasq.c:225
#, c-format
msgid "unknown user or group: %s"
msgstr ""

#: dnsmasq.c:282
#, c-format
msgid "cannot chdir to filesystem root: %s"
msgstr ""

#: dnsmasq.c:294
#, c-format
msgid "cannot fork into background: %s"
msgstr ""

#: dnsmasq.c:443
#, c-format
msgid "started, version %s DNS disabled"
msgstr ""

#: dnsmasq.c:445
#, c-format
msgid "started, version %s cachesize %d"
msgstr ""

#: dnsmasq.c:447
#, c-format
msgid "started, version %s cache disabled"
msgstr ""

#: dnsmasq.c:449
#, c-format
msgid "compile time options: %s"
msgstr ""

#: dnsmasq.c:455
msgid "DBus support enabled: connected to system bus"
msgstr ""

#: dnsmasq.c:457
msgid "DBus support enabled: bus connection pending"
msgstr ""

#: dnsmasq.c:462
#, c-format
msgid "warning: failed to change owner of %s: %s"
msgstr ""

#: dnsmasq.c:466
msgid "setting --bind-interfaces option because of OS limitations"
msgstr ""

#: dnsmasq.c:471
#, c-format
msgid "warning: interface %s does not currently exist"
msgstr ""

#: dnsmasq.c:476
msgid "warning: ignoring resolv-file flag because no-resolv is set"
msgstr ""

#: dnsmasq.c:479
msgid "warning: no upstream servers configured"
msgstr ""

#: dnsmasq.c:483
#, c-format
msgid "asynchronous logging enabled, queue limit is %d messages"
msgstr ""

#: dnsmasq.c:495
#, c-format
msgid "DHCP, static leases only on %.0s%s, lease time %s"
msgstr ""

#: dnsmasq.c:496
#, c-format
msgid "DHCP, IP range %s -- %s, lease time %s"
msgstr ""

#: dnsmasq.c:510
msgid "root is "
msgstr ""

#: dnsmasq.c:510
msgid "enabled"
msgstr ""

#: dnsmasq.c:512
msgid "secure mode"
msgstr ""

#: dnsmasq.c:538
#, c-format
msgid "restricting maximum simultaneous TFTP transfers to %d"
msgstr ""

#: dnsmasq.c:654
msgid "connected to system DBus"
msgstr ""

#: dnsmasq.c:742
#, c-format
msgid "failed to create helper: %s"
msgstr ""

#: dnsmasq.c:745
#, c-format
msgid "setting capabilities failed: %s"
msgstr ""

#: dnsmasq.c:749
#, c-format
msgid "failed to change user-id to %s: %s"
msgstr ""

#: dnsmasq.c:754
#, c-format
msgid "failed to change group-id to %s: %s"
msgstr ""

#: dnsmasq.c:757
#, c-format
msgid "failed to open pidfile %s: %s"
msgstr ""

#: dnsmasq.c:760
#, c-format
msgid "cannot open %s: %s"
msgstr ""

#: dnsmasq.c:811
#, c-format
msgid "child process killed by signal %d"
msgstr ""

#: dnsmasq.c:815
#, c-format
msgid "child process exited with status %d"
msgstr ""

#: dnsmasq.c:819
#, c-format
msgid "failed to execute %s: %s"
msgstr ""

#: dnsmasq.c:863
msgid "exiting on receipt of SIGTERM"
msgstr ""

#: dnsmasq.c:881
#, c-format
msgid "failed to access %s: %s"
msgstr ""

#: dnsmasq.c:903
#, c-format
msgid "reading %s"
msgstr ""

#: dnsmasq.c:914
#, c-format
msgid "no servers found in %s, will retry"
msgstr ""

#: dhcp.c:38
#, c-format
msgid "cannot create DHCP socket : %s"
msgstr ""

#: dhcp.c:50
#, c-format
msgid "failed to set options on DHCP socket: %s"
msgstr ""

#: dhcp.c:68
#, c-format
msgid "failed to set SO_REUSE{ADDR|PORT} on DHCP socket: %s"
msgstr ""

#: dhcp.c:81
#, c-format
msgid "failed to bind DHCP server socket: %s"
msgstr ""

#: dhcp.c:94
#, c-format
msgid "cannot create ICMP raw socket: %s."
msgstr ""

#: dhcp.c:223
#, c-format
msgid "DHCP packet received on %s which has no address"
msgstr ""

#: dhcp.c:387
#, c-format
msgid "DHCP range %s -- %s is not consistent with netmask %s"
msgstr ""

#: dhcp.c:731
#, c-format
msgid "failed to read %s:%s"
msgstr ""

#: dhcp.c:767
#, c-format
msgid "bad line at %s line %d"
msgstr ""

#: dhcp.c:882
#, c-format
msgid "duplicate IP address %s in dhcp-config directive."
msgstr ""

#: dhcp.c:885
#, c-format
msgid "duplicate IP address %s in %s."
msgstr ""

#: dhcp.c:928
#, c-format
msgid "%s has more than one address in hostsfile, using %s for DHCP"
msgstr ""

#: dhcp.c:933
#, c-format
msgid "duplicate IP address %s (%s) in dhcp-config directive"
msgstr ""

#: lease.c:58
#, c-format
msgid "cannot open or create lease file %s: %s"
msgstr ""

#: lease.c:84
msgid "too many stored leases"
msgstr ""

#: lease.c:125
#, c-format
msgid "cannot run lease-init script %s: %s"
msgstr ""

#: lease.c:131
#, c-format
msgid "lease-init script returned exit code %s"
msgstr ""

#: lease.c:238
#, c-format
msgid "failed to write %s: %s (retry in %us)"
msgstr ""

#: rfc2131.c:316
#, c-format
msgid "no address range available for DHCP request %s %s"
msgstr ""

#: rfc2131.c:317
msgid "with subnet selector"
msgstr ""

#: rfc2131.c:317
msgid "via"
msgstr ""

#: rfc2131.c:328
#, c-format
msgid "DHCP packet: transaction-id is %u"
msgstr ""

#: rfc2131.c:333
#, c-format
msgid "Available DHCP subnet: %s/%s"
msgstr ""

#: rfc2131.c:335
#, c-format
msgid "Available DHCP range: %s -- %s"
msgstr ""

#: rfc2131.c:363 rfc2131.c:397
msgid "disabled"
msgstr ""

#: rfc2131.c:412 rfc2131.c:960
msgid "address in use"
msgstr ""

#: rfc2131.c:426 rfc2131.c:797
msgid "no address available"
msgstr ""

#: rfc2131.c:433 rfc2131.c:923
msgid "wrong network"
msgstr ""

#: rfc2131.c:446
msgid "no address configured"
msgstr ""

#: rfc2131.c:452 rfc2131.c:973
msgid "no leases left"
msgstr ""

#: rfc2131.c:672
#, c-format
msgid "Vendor class: %s"
msgstr ""

#: rfc2131.c:674
#, c-format
msgid "User class: %s"
msgstr ""

#: rfc2131.c:715
#, c-format
msgid "disabling DHCP static address %s for %s"
msgstr ""

#: rfc2131.c:736
msgid "unknown lease"
msgstr ""

#: rfc2131.c:745 rfc2131.c:1089
msgid "ignored"
msgstr ""

#: rfc2131.c:768
#, c-format
msgid "not using configured address %s because it is leased to %s"
msgstr ""

#: rfc2131.c:778
#, c-format
msgid "not using configured address %s because it is in use by the server or relay"
msgstr ""

#: rfc2131.c:781
#, c-format
msgid "not using configured address %s because it was previously declined"
msgstr ""

#: rfc2131.c:795 rfc2131.c:966
msgid "no unique-id"
msgstr ""

#: rfc2131.c:863
msgid "wrong server-ID"
msgstr ""

#: rfc2131.c:882
msgid "wrong address"
msgstr ""

#: rfc2131.c:899
msgid "lease not found"
msgstr ""

#: rfc2131.c:931
msgid "address not available"
msgstr ""

#: rfc2131.c:942
msgid "static lease available"
msgstr ""

#: rfc2131.c:946
msgid "address reserved"
msgstr ""

#: rfc2131.c:954
#, c-format
msgid "abandoning lease to %s of %s"
msgstr ""

#: rfc2131.c:1391
#, c-format
msgid "tags: %s"
msgstr ""

#: rfc2131.c:1478
#, c-format
msgid "cannot send DHCP/BOOTP option %d: no space left in packet"
msgstr ""

#: rfc2131.c:1678
#, c-format
msgid "Ignoring domain %s for DHCP host name %s"
msgstr ""

#: rfc2131.c:1696
#, c-format
msgid "requested options: %s"
msgstr ""

#: rfc2131.c:1746
#, c-format
msgid "next server: %s"
msgstr ""

#: rfc2131.c:1770
#, c-format
msgid "bootfile name: %s"
msgstr ""

#: rfc2131.c:1773
#, c-format
msgid "server name: %s"
msgstr ""

#: netlink.c:63
#, c-format
msgid "cannot create netlink socket: %s"
msgstr ""

#: netlink.c:230
#, c-format
msgid "netlink returns error: %s"
msgstr ""

#: dbus.c:151
msgid "attempt to set an IPv6 server address via DBus - no IPv6 support"
msgstr ""

#: dbus.c:287
msgid "setting upstream servers from DBus"
msgstr ""

#: dbus.c:325
msgid "could not register a DBus message handler"
msgstr ""

#: bpf.c:150
#, c-format
msgid "cannot create DHCP BPF socket: %s"
msgstr ""

#: bpf.c:178
#, c-format
msgid "DHCP request for unsupported hardware type (%d) received on %s"
msgstr ""

#: tftp.c:175
msgid "unable to get free port for TFTP"
msgstr ""

#: tftp.c:190
#, c-format
msgid "unsupported request from %s"
msgstr ""

#: tftp.c:271
#, c-format
msgid "TFTP sent %s to %s"
msgstr ""

#: tftp.c:294
#, c-format
msgid "file %s not found"
msgstr ""

#: tftp.c:405
#, c-format
msgid "TFTP error %d %s received from %s"
msgstr ""

#: tftp.c:436
#, c-format
msgid "TFTP failed sending %s to %s"
msgstr ""

#: log.c:169
#, c-format
msgid "overflow: %d log entries lost"
msgstr ""

#: log.c:246
#, c-format
msgid "log failed: %s"
msgstr ""

# @Simon: I would like to have an example :) - instead of "von" it would be possible to use "aus",
# @Simon: both translate to "of" and nothing else, but depending on the sense one could be better 
# @Simon: than the other.
#: log.c:402
msgid "FAILED to start up"
msgstr "Start gescheitert"

# @Simon: Here I need an example to understand it :)
#, fuzzy
#~ msgid "read %s - %d hosts"
#~ msgstr "lese %s - %d Adressen"